specification sheet lumenbeam - stockholm …...line black data- orange data+ red junction box (by...

5 year warranty

SPECIFICATION SHEET lumenbeam™

SMALLWHITE & STATIC COLORS

EM - R4

1/7 Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P. 514.937.3003 F. [email protected] www.lumenpulse.com

Copyright © 2012 Lumenpulse

Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

2012.05.02

FEATURES AND BENEFITS

Client:

Project name:

Order #

Type: Qty:

Physical :• Low copper content high pressure die-cast aluminum housing• Heavy aluminum formed yoke• Stainless steel hardware• Silicone sealing devices• Clear tempered glass• Dual chamber design for heat management and ease of maintenance• Electro-statically applied polyester powder coat finish• 2.40 kg / 5.20 lbs• EPA: Front = 0.35 sq.ft./0.033 sq.m. Side= 0.31 sq.ft/0.029 sq.m.• IP66• Corrosion-resistant option for marine environments

Performance :• 6°, 10°, 20°, 40°, Elliptical distribution on 10° and 40° optics• CRI values: 78+• Lumen maintenance 120,000 hrs [L70 @ 25°C]• Operating temperatures: -25° C to 50° C [-13F to 122F]

Electrical :• Line voltage luminaire for 120 to 277V• Power and data in 1 cable, 3ft/1m cord (#16-5)• 14 watts• 0-10 volt, DMX or DALI dimming options

WIRE COLOR / USE

GREEN GROUNDWHITE NEUTRALBLACK LIVE 120-277VRED 0-10V / DATA +ORANGE 0-10V / DATA -

Wiring detail

5 716

"

[138mm]

165 5 "

[135mm]8 3

8 "

[213mm]

4 58 "

[118mm]

Standard Yoke Mounting Option

0°

90°

140°

75°



EM - R4




2012.05.02

MOUNTING OPTIONS

Standard Yoke Mountingholes pattern

1 12 "

[38mm]

716

"

[11mm]

516

"[8mm]

Standard Yoke Mounting Option

SKStake

KNKnuckle

Suitable for 1/2”, 3/4” and 1” pipe diameter

8 38"

[213mm]

4 9 1"[236mm]

17 116

"

[434mm]

9 58 "

[245mm]



EM - R4




2012.05.02

MOUNTING OPTIONS - continued from page 2

OPTICAL OPTIONS*Factory installed

*See photometric section for optical performance data with the spread lens.

CNCanopy Cover

Suitable for standardround junction boxes

surface mounted

TOP VIEW

RIGHT VIEW FRONT VIEW

10"[254mm]

LSLHLinear Spread Lens

Horizontal distribution(not adjustable on site)

LSLVLinear Spread LensVertical distribution

(not adjustable on site)

14 "

[6mm]

"[89mm]

231

Mounting basescrew hole pattern



EM - R4




2012.05.02

ACCESSORIESOrder separately

Optical Accessories:LBS-SN-___-BK*Interior surfacepainted black.

Snoot accessory. Please specify desired exterior finish :SI - Silver SandTextBKM - Matte blackCC - Custom, please specify RAL color

LBS-VS-___-BK*Interior surfacepainted black.

Visor accessory. Please specify desired exterior finish :SI - Silver SandTextBKM - Matte blackCC - Custom, please specify RAL color

LBS-WG-___ Wire Guard accessory. Please specify desired exterior finish :SI - Silver SandTextBKM - Matte blackCC - Custom, please specify RAL color

LBS-LSLA-___ Linear Spread Lens Adjustable accessory. Please specify desired exterior finish :SI - Silver SandTextBKM - Matte blackCC - Custom, please specify RAL color

Accessory combinations:

Snoot

Snoot+

Visor

Linear SpreadLens Adjustable

Visor Wire Guard

NO NO YES

NO NO YES

YES YES NO

Control Systems:LTO Lumentouch is a wall mount DMX 512 controller keypad

LCU Lumencue is a USB / mini SD DMX 512 controller

LID LumenID is a serializing and addressing DMX 512 controller.It must be specifi ed on all DMX applications.Refer to LID specifi cation sheet for details.

LTN Lumentone is a simple pre-programmed DMX 512 controllerwith a push button rotary dial and live feedback.

CBOX :iCBOX-___V-___-___ Interior DMX 512 data box.

Data input and output, M20 provision holes with plugs.Voltage input and output, M20 provision holes with plugs.Up to six outputs to fi xtures, M20 provision holes with plugs.Please specify desired input voltage and fi nish.Refer to iCBOX specifi cation sheet for details.

CBOX-___V-___-___ DMX 512 data box.Data input and output, M20 provision holes with plugs.Voltage input and output, M20 provision holes with plugs.Up to six outputs to fi xtures, M20 provision holes with plugs.Please specify desired input voltage and fi nish.Refer to CBOX specifi cation sheet for details.



EM - R4




2012.05.02

TYPICAL WIRING DIAGRAMS

120-277V

Ground greenNeutral white

Line black

Data- orangeData+ red

Junction box(by others)

Fromdimmer

120-277V Tofixture

To nextfixture

Maximum run length by 15A circuit @ 120V:32 lumenbeams (16AWG cable),

10’ on center spacing 325’ maximum cable length

#16-5 Power& data cable

(by others

120-277V


To fixture

To nextfixture

Fromprevious

fixture


Line black

Wire-nuts

#16-3 Powercable

(by others)

*Power data cables by others.

Dimming Version (0-10V)

Non-Dimming Version

Dimmer

JBOX

JBOX



EM - R4




2012.05.02

TYPICAL WIRING DIAGRAMS - continued from page 6

Daisy Chain Layout (DMX)

Star Layout (DMX)

120-277V

Lumentouch

CBOX

CBOX

#16-5 Power &DMX cable(by others)

32 LBS (16AWG cable) max. per CBOX ST,10’ on center spacing.

6 outputs max. per CBOX ST.325’ max. total cable length per CBOX ST

(based on a 15A circuit @ 120V)

32 LBS (AWG cable) max. per CBOX DS,10’ on center spacing.

2 outputs max. per CBOX DS.325‘ max. total cable length per CBOX DS.

(Based on a 15A @ 120V)

120-277V

DMXinput

#16-5 Power &DMX cable(by others)

Lumentouch

DMX terminator is required at the end of each run to maintain data integrity.

(2x) DMX lumenterminator included per CBOX DS(6x) DMX lumenterminator included per CBOX ST

See installation instructions for details.

*Each fixture requires 3 addresses.

*Each fixture requires 3 addresses.


Line black

DMX+ redDMX- orange

Wire-nuts


lumenterminator(use at the endof each run only)

Fromfixture or

CBOXToFixture


Line black

DMX+ redDMX- orange

Wire-nuts


lumenterminator(use at the endof each run only)

Fromfixture or

CBOXToFixture

120-240V

120-240V

DMXinput



EM - R4




2012.05.02

HOW TO ORDER

1

Housing:LBS - Lumenbeam™ Small

2

Voltage:120 - 120 volts208 - 208 volts240 - 240 volts277 - 277 volts

3

Colors and Color temperatures: 27K - 2700K30K - 3000K35K - 3500K40K - 4000K57K - 5700KRD - RedGR - GreenBL - Blue

4

Optic:

VN - Very Narrow 6°

NS - Narrow Spot 10°

NF - Narrow Flood 20°

FL - Flood 40°

5

Optical Option: LSLH - Linear Spread Lens Horizontal distributionLSLV - Linear Spread Lens Vertical distribution

*Factory installed. See Optical Accessories forfield adjustable spread lens.

6

Finish:SI - Silver SandTextBK - Black SandTextWH - WhiteCC - Custom (please specify RAL color)

7

Dimming:DIM - 0-10V Dimming optionDMX - DMX Dimming optionDALI - DALI Dimming optionNO - No Dimming

8

Mounting Option:SK - Stake MountingKN - Knuckle MountingCN - Canopy Cover Mounting

9

Option:CRC - Corrosion-resistant Coating

LBS

Housing VoltageColors and

colortemperatures

Optic OpticalOption Finish Dimming Mounting

Option Option

1 2 3 4 5 6 7 8 9

specification sheet lumenbeam - stockholm …...line black data- orange data+ red junction box (by...

Documents