specification of guar gum powder (fhhv-8)

1
Specification of Guar gum Powder (FHHV-8) Viscosity: At 3 minutes Cps min. At 60 minutes 45 CPS. (0.48 %( 1.2G in 250 ML of de ionized Water solution with 2% KClL, At 25C String 2500 RPM for 2 and half minutes, then take 150 ML solution tested by using FANN 35 at 300 RPM at 3 rd Minute and 59 th Minute. 1. Moisture 5.0% Max. 2. Protein 4.0% Max. 3. Acid insoluble Residue 2.0% Max. 4. pH 6.5-7.5 5. Gum Content 85% Min. 6. Mesh thru 200 mesh 99.0% Min. Thru 300 mesh 66% Min. Physical Analysis Packing: In 25 Kg net laminated or water proof coating paper bag with 120g inner linear polythene closed by tied itself. Outside is white color with seal strip as same as the bottom strip. The Bg logo color is in PEA GREEN and words are in red.

Upload: shaukat-mazari

Post on 20-Apr-2015

69 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Specification of Guar Gum Powder (FHHV-8)

Specification of Guar gum Powder (FHHV-8)

Viscosity: At 3 minutes Cps min. At 60 minutes 45 CPS.

(0.48 %( 1.2G in 250 ML of de ionized Water solution with 2% KClL, At 25C String 2500 RPM for 2 and half minutes, then take 150 ML solution tested by using FANN 35 at 300 RPM at 3rd Minute and 59th Minute.

1. Moisture 5.0% Max.2. Protein 4.0% Max.3. Acid insoluble Residue 2.0% Max.4. pH 6.5-7.55. Gum Content 85% Min.6. Mesh thru 200 mesh 99.0% Min.

Thru 300 mesh 66% Min.

Physical Analysis

Packing: In 25 Kg net laminated or water proof coating paper bag with 120g inner linear polythene closed by tied itself. Outside is white color with seal strip as same as the bottom strip. The Bg logo color is in PEA GREEN and words are in red.