VISIT OUR ON-LINE STORE WWW.ALLELECTRONICS.COM38

EURO TO USAConverts 2-pin round European plugs to 2-pin flat power plugs. CAT# AP-USA $1.50 ea. • 10 for $1.25 ea.

INTERNATIONALPLUG ADAPTERS

USA TO EURO Converts 2-pin flat USA plugs to 2-pin round Euro plugs. Can be used with 3-pin grounded USA plugs, but ground pin is voided. CAT# AP-EU $2.00 each

Mounting ears with holes on 1.575" (40mm) centers. 0.25" QC connector. Rated 15A 250Vac. UL, CSA.CAT# ACS-48 $1.25 each10 for $1.10 each • 100 for 90¢ eachSame as ACS-48 above, but with solder-loops.CAT# ACS-70 $1.00 each10 for 90¢ each • 100 for 75¢ each

IEC POWER INPUT

20 MM, 150 OHM SPEAKER Hosiden HDR960. 20mm, 150 ohm dynamic element. 0.79" diameter x 0.1" thick. Large quantity available. CAT# SK-215 2 for $1.00100 for 40¢ each • 1000 for 25¢ each

8 OHM 40MM SPEAKER40mm diameter x 6mm thick. 8 Ohm, general purpose speaker. 2" leads with 2-conductor female connector, 2mm centers. Large quantity available CAT# SK-840 75¢ each 10 for 70¢ each • 100 for 60¢ each

8 OHM 57MM SPEAKERKobitone# 254-PS610-RO/ OBO # OBO-57008F-01 Great-sounding 2.24" mylar cone speaker. 2.24" dia. x 0.331". NeFeB magnet. Solder spot connections.Specifications:• Power Rating: Normal 500mW Max. 1.0W • Frequency Range: 350 - 13,000Hz CAT# SK-224 $1.35 $1.20 each10 for $1.00 each • 100 for 85¢ each

13MM 32 OHM SPEAKERPossibly designed for headphones. Pin terminals.CAT# SK-850 75¢ each

2” 4 OHM SPEAKERBoston Acoustics# 304-050001-002” cone with soft rolled edge. 4 Ohm impedance. Shielded magnet. Overall depth, 1.61”.CAT# SK-304 $2.00 each 10 for $1.75 each

SPEAKERS

MID-RANGE & WOOFERS

2.5" 45 OHM SPEAKERIdeal for intercom applications. Rubber gasket on perimeter. Tough, coated paper cone. Terminals are solder spots with flexible plastic extension -- can be easily bypassed or removed. Heavy Alnico magnet, 1.8" diameter. Specs: 45 Ohm, 0.25W. Overall diameter including removable rubber gasket, 2.7". Overall depth, 0.9".CAT # SK-451 $1.25 each10 for $1.10 each • 100 for 95¢ each

2.25" 8 OHM 0.5 WATT SPEAKERPaper cone, 1.43" diameter ceramic magnet. 0.85" overall depth. 3" leads w/ 2-conductor female connector, 2mm centers.CAT # SK-85 $1.50 each

IEC POWER CONNECTORPower Dynamics #43R01-2311 IEC female straight plug for up to 16 AWG wire. Integral cable clamp, strain relief and screw terminals. Rated 10A 250Vac (15A for UL, CSA only).RoHs compliant. UL, CSA, VDE.CAT # ACS-430 $2.00 each10 for $1.75 each • 100 for $1.50 each

Standard duplex power receptacle with two integrated USB charging ports. Rapid 4.2 Amp USB charger provides enough power to charge cell-phones, tablets and most USB powered devices. Over-current, over-charging, short circuitprotection. Tamper Resistant (TR). 15A receptacles. Includes wall-plate and hardware. cULus, CSA ANS/UL.White CAT # ACS-73W $11.95 eachIvory CAT # ACS-73IV $11.95 each

DUPLEX RECEPTACLESWITH 4.2A USB PORTS

HOSPITAL GRADE 3-CONDUCTORIN-LINE GROUNDED SOCKETCooper Wiring Devices# 8269 2-Pole, 3-Wire grounding receptacle. Meets federal WC-596 requirements. High-impact resistant thermo-plastic housing. Clamp for 0.250" to 0.690" diameter cord. NEMA construction and standard compliances. Color-coded screw terminals. 15 amp, 125 volt. UL, CSA.CAT # ACS-72 $5.25 each 10 for $5.00 each

Reduced Price

FAX YOUR ORDER 24 HOURS A DAY - 7 DAYS A WEEK 39

5.25” 70W SHIELDED WOOFER, 8ΩRolled foam edge. Shielded for use with computers or video. 16 oz magnet. 1" voice coil. 70W / 130W max.62 - 9 KHz frequency response. 84 dB @ 1W/ 1m.CAT# GW-2058 $14.70 each

4" 40W SHIELDED WOOFER, 8 OHMRolled foam edge. Shielded for use with computers or video. 11 oz magnet. 1" voice coil. 40 Watts / 70 Watts max. 70 - 10 KHz frequency response. 83 dB @ 1W/ 1m.CAT# GW-2048 $12.50 each

8" 100W WOOFER, 8Ω100 Watts RMS, 190 Watts Max. 25 - 6000Hz frequency response. 84 dB / refer-ence 8 Ohm / 85 Vrms. 1.5" aluminum voice coil. 20oz magnet. Poly mica cone. Butyl rubber surround. Stamped steel frame.Fits enclosure hole size of 7.25". Mountingdepth is 3.25".CAT # GW-8028 $32.50 each

5.25" 50W5.25" diameter midrange speaker. 8 ohms. 0.75" voice coil. 10 oz magnet. Rolled foam edge. 50 Watts RMS. 550 - 15 KHz. 92 dB @ 1W/ 1m.CAT# GM-658 $9.10 each

5.25" 60W5.25" diameter midrange speaker. 8 ohms. 1" voice coil. 12 oz magnet. Poly-mica cone with rolled foam edge. 60 Watts RMS. 500 - 15 KHz. 96 dB @ 1W/ 1m.CAT# GM-858 $11.90 each

3.25" SQUARE PIEZO TWEETER3.25" square, wide dispersion tweeter. 50 Watts RMS. Frequency response, 3.5K - 27 KHz. 94 dB @ 1W/ 1m.CAT# GT-1005 $3.75 each

3.5” ROUND PIEZO 3.5" diameter wide dispersion piezo tweeter. 60 Watts RMS @ 5 KHz. Frequency response, 3.5 - 30 Khz. 96 db @ 1W/ 1m. CAT# GT-1056 $3.50 each

TWEETERSCERWIN-VEGA DOME TWEETER, 4Ω• Cerwin-Vega LSETH2152• Nice, heavy-duty textile dome tweeter.

• 4 Ohm impedance.• Faceplate, 4.17" x 3.48"

with 4 mounting holes on 2.56" centers. 1.50" behind faceplate depth.

• Magnet, 2.90" diameter x 1.25"• Solder/quick-connect terminals, 0.187" & 0.25"CAT # TW-2152 $8.50 $6.00 each

3.5" speaker in break-resistant wall-mount enclosure. Durable poly-cone for indoor and sheltered outdoor use. White enclosure, 4.25" square x 2.20" deep. 10" color-coded pigtail leads. New, individually boxed with mounting screws.CAT# SK-350 $4.50 each

Universal# SP-20B. Horn-type communicationspeaker. 20 Watt 8 Ohms. 5.25" diameter x 6" long. 3-hole adjustable mounting bracket. 12" leads. CAT# PHS-20 $4.95 each24 for $4.25 each

8Ω 15W SPEAKER

PAGING HORN

10" 110W WOOFER, 8 OHMRolled foam edge with poly laminated cone. 20 oz magnet with vent and bumper plate. 1.5" voice coil. 110 Watts / 220 Watts max. 40 - 5 KHz freq. response. 90 dB @ 1W/ 1m.CAT# GW-2108 $27.50 each

6" WOOFER, 4 OHM6" diameter cone with rubber surround. Shielded magnet. Overall frame diameter, 7". Mounting cut-out diameter, 6". Depth behind frame, 3.5".CAT # SK-606 $14.95 each

8" CERWIN-VEGA WOOFER, 8 OHMCerwin-Vega # LSCL420308" woofer with foam surround. 3.35" diameter magnet. Cone diameter, 7.25". Overall frame diameter, 8". Mounting cut-out diameter, 7.20". Overall depth, 3.68" including gasket.CAT # SK-808 $17.95 each

Reduced Price

FAST FRIENDLY SERVICE

50 AMPFor 20-8 wire. 6.25” x 1.00” x 0.99” h. 0.53”(13.5mm) terminal centers. UL.CAT # TB-50 $4.00 each10 for $3.85 each • 100 for $3.60 each

35 AMPFor 14-10 wire. 5.38” x 0.93” x 0.75” h. 0.46”(11.5mm) terminal centers. UL.CAT # TB-35 $2.70 each 10 for $2.45 each • 100 for $2.15 each

20 AMPFor 18-14 wire. 4.6” x 0.80” x 0.67” h.0.39”(10mm) terminal centers. UL, CSA, VDE. CAT # TB-20 $2.25 each10 for $2.10 each • 100 for $1.80 each

For connecting stripped wires from 8-22 AWGdepending on the block size. Flexible white(natural) Nylon 66 body, 94V2 rated for 105º C.400 Volts. All metal parts are completely recessed in the housing to prevent shorts.Each strip has 12 circuits, with a mounting hole between each circuit. Can be easily shortenedwith a knife or saw.

7 AMPFor 22-18 wire. 3.78” x 0.67” x 0.57” h.0.32”(8mm) terminal centers. UL, CSA, VDE.CAT # TB-7 $2.00 each10 for $1.80 each • 100 for $1.60 each

4-POSITION PLUGGABLETERMINAL STRIP & HEADER

RDI/ Buchanan 4-series / AMP 796598-6. Single-row barrier strip. Screw terminals on0.325" centers. 0.5" feed-through pins. 7.9" x 0.60" x 0.50" high. Rated 15A, 150V. For 14-22 AWG wire. UL, CSA.CAT# TER-24FT $2.00 each10 for $1.70 each

24-POSITION SINGLE-ROW TERMINAL STRIP, FEED-THRU

Bocatech® Inc BTMH-15BSpecifications:• Rated voltage: 48 Volt DC / 300 Volt AC• Two feed terminals 1/4-20 thread brass studs• Ten distribution terminals 8-32 brass screws• Solid brass on insulated base• Dimensions: 5-3/4" (L) x 1-1/4" (W) x 1-1/16" (height at the stud)

• Two mounting holes: 5-1/4" center to centerCAT# BR-100 $6.95 ea. • 10 for $6.50 ea.

EUROSTYLE TERMINAL STRIPS

100 AMP BRASS BUSS BAR

SPRING-LEVERTERMINAL STRIP2.25" SQUARE BEZEL Red and black spring-lever terminals in a recessed cup that fits a 50mm (1.95") diameter round cut out. 57mm (2.23") square bezel with countersunk mounting holes in each corner.CAT# SWT-202 2 for $1.00 • 100 for 35¢ ea.

Riacon 4-position screw-clamp terminal block and mating friction-lock header. Terminals on 5mm centers. For 12-28 AWG wire. Rated 6A/125Vac. UL, CSA.CAT# TER-104 95¢ pair10 for 75¢ per pair • 100 for 60¢ per pair

The electret microphones listed below require alow current voltage of 1.5 - 10 Vdc to operate.They will not function in applications that arenot specifically wired for electret microphones.

ELECTRET MICROPHONE, 15’ CORDDurable rubberized housing, 13mm dia. x 31mm long. Mounting plate with adjustable ball-joint. 15’ shielded cable.CAT# MIC-12 $1.15 each50 for 95¢ each

ELECTRET MICROPHONEHosiden# KUB6133-010070. 6mm diameter x 2.7mm element with 30mm red and black leads.CAT# MIC-613 50¢ each100 for 30¢ each

ELECTRET MICROPHONEPanasonic # WM-0636mm diameter x 5mm. Solder spot connections.CAT# MIC-063 2 for $1.0010 for 45¢ each • 100 for 40¢ each

ELECTRET MICROPHONES

MINI-ELECTRET CONDENSER MICROPHONESOmni-directional. 6.0mm dia. x 1.8mm. Frequency range: 20-200,000Hz. 2.2KΩ impedance.

EM-B6018P. PC pins on 1.9mm centers.CAT # MIC-36 3 for 99¢ • 100 for 25¢ ea.

EM-B6018. Solder pads on 1.9mm centers.CAT # MIC-37 3 for 99¢ • 100 for 25¢ ea.

41