sparkvue*, part of intel® education · copyright © 2014 intel corporation. all rights reserved....
TRANSCRIPT
1
Copyright © 2014 Intel® Corporation. All rights reserved. Intel® and the Intel® logo are registered trademarks of Intel® Corporation in the United
States and other countries. *Other names and brands can be reclaimed as the property of others.
SPARKvue*, part of Intel® Education
User Guide
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. EXCEPT AS
PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO
LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO SALE
AND/OR USE OF INTEL PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER
INTELLECTUAL PROPERTY RIGHT.
All products, dates, and figures specified are preliminary based on current expectations and are subject to
change without notice. Availability in different channels may vary.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
The hardware vendors of the bare bone notebooks and the interchangeable components remain solely
responsible for the design, sale and functionality of their respective products, including any liability arising
from product infringement and product warranty. Intel is not warranting the products of the hardware
vendors.
Information regarding third-party products is provided solely for educational purposes. Intel is not
responsible for the performance or support of third-party products and does not make any representations or
warranties whatsoever regarding quality, reliability, functionality, or compatibility of these devices or products
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must
not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined."
Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them. The information here is subject to change without
notice. Do not finalize a design with this information.
The vendors of the Intel® Education Solutions and other components remain solely responsible for the design,
sale and functionality of their respective products, including any liability arising from intellectual property
infringement and/or product warranty. Information about these products is provided for informational
purposes only; Intel is not recommending any particular third-party product, Intel is not responsible for the
performance or support of third-party products, and Intel does not make any representations or warranties
whatsoever regarding quality, reliability, functionality, or compatibility of these products. This document
contains information on products in the design phase of development.
*Other names and brands may be claimed as the property of others.
Copyright (C) 2014 Intel Corporation. All rights reserved.
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Table of contents
Getting started with SPARKvue ............................................................................................................................... 5
Benefits in education .......................................................................................................................................... 5
Accessing the application .................................................................................................................................... 6
Main features ...................................................................................................................................................... 6
Home screen ........................................................................................................................................................... 7
Main screen and elements .................................................................................................................................. 7
Select language ................................................................................................................................................... 9
Show a SPARKlab ................................................................................................................................................... 10
Main screen and elements ................................................................................................................................ 10
Show a SPARKlab ............................................................................................................................................... 15
Calibrate a sensor .............................................................................................................................................. 15
Tare a sensor ..................................................................................................................................................... 17
Set sampling mode ............................................................................................................................................ 20
Set an automatic stop condition ....................................................................................................................... 21
Start recording a run of periodically sampled data........................................................................................... 22
Start recording a set of manually sampled data ............................................................................................... 23
Change data display in SPARKlab page ............................................................................................................. 24
Hide / show runs in data display ....................................................................................................................... 26
Delete a run ....................................................................................................................................................... 26
Add a calculation ............................................................................................................................................... 28
Display a calculation .......................................................................................................................................... 30
Select data statistics .......................................................................................................................................... 31
Apply a curve fit ................................................................................................................................................ 32
Find the x- and y-values of a point .................................................................................................................... 33
Find the x- and y- difference between two points ............................................................................................ 34
Find the slope on a data point .......................................................................................................................... 35
Use the built-in camera as an exploration tool ................................................................................................. 35
Zoom in / zoom out a camera image ................................................................................................................ 36
Calibrate the camera image measurements ..................................................................................................... 37
Measure distance on a camera image .............................................................................................................. 38
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Add annotations on a camera image ................................................................................................................ 38
Manage camera images .................................................................................................................................... 39
Take a snapshot ................................................................................................................................................. 41
Start a journal .................................................................................................................................................... 41
Print a journal .................................................................................................................................................... 42
Export a Journal ................................................................................................................................................. 43
Save a SPARKlab ................................................................................................................................................ 45
Export a SPARKlab ............................................................................................................................................. 46
Open a SPARKlab ................................................................................................................................................... 48
Open an Experiment ......................................................................................................................................... 48
Open saved work............................................................................................................................................... 49
Build a SPARKlab ................................................................................................................................................... 50
Main screen and elements ................................................................................................................................ 50
Start a new SPARKlab page ............................................................................................................................... 56
Delete a SPARKlab page .................................................................................................................................... 57
Add a background image................................................................................................................................... 57
Add elements to a SPARKlab page .................................................................................................................... 58
Create a new line graph display ........................................................................................................................ 59
Create a new bar graph display......................................................................................................................... 61
Add bars and bar names in bar graphs ............................................................................................................. 63
Create a new table display ................................................................................................................................ 64
Create a new digits display................................................................................................................................ 66
Create a new meter display .............................................................................................................................. 67
Add a text box ................................................................................................................................................... 69
Add a media file ................................................................................................................................................ 70
Remove or replace a media file ........................................................................................................................ 71
Create an assessment ....................................................................................................................................... 72
Create a manual data set .................................................................................................................................. 74
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Getting started with SPARKvue
SPARKvue is a tool for data analysis that facilitates experimentation through use of
sensors. It enhances the development of critical thinking skills and the generation of new
lines of research from data capture and its digitization for study and analysis.
Benefits in education
Allows data collection through sensors for the study of science and math concepts.
Simplifies data analysis through graphical and other functions.
Facilitates the comparison of data and results for study and understanding.
Reduces the amount of investment on expensive laboratory equipment.
Facilitates use of competitive tools for data analysis in various disciplines like biology, natural sciences,
chemistry, physics, etc.
Establishes the relationship of phenomena from hypothetical scenarios.
Helps with monitoring and changing conditions of experiment approach from different perspectives.
6
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Accessing the application
1. Press the SPARKvue
icon to access the
home screen.
2. Choose a
measurement and
press Show to start
data collection.
Main features
On-board acceleration sensor
Registers acceleration in x, y, z axes
when the device is in motion.
On-board microphone
Measures and records sound level.
On-board temperature sensor
Measures and records the
temperature.
On-board light sensor
Measures and records luminosity
level.
Back camera
Captures an image sequence using
the back camera.
Front camera
Capture an image sequence using
the front camera.
Main screen
7
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Main screen and elements
Windows Android
Device tools
Shows information about software version as well as different
configuration options such as SPARKvue language, available
sensor interfaces, and file management.
● ●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces via
Bluetooth.
● ●
Manage files
Contains commands to manage files, such as copy, move,
and delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue
Shows information about software license, version, and
support contact.
● ●
Help
Shows a user’s guide. ● ●
Open
Opens a previously saved experiment or an embedded SPARKlab. ● ●
Show
Starts data recording once a measurement has been selected. ● ●
Build
Allows users to build a custom SPARKlab. ● ●
Home screen
The SPARKvue home screen displays the internal and external sensors which are correctly connected to the
system to start data collection.
8
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
1. SPARKlabs
2. Sensors
3. Device tools
4. Help
5. Open
6. Show
7. Build
1 2
6
4
3
5 7
9
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Select language
1. Press Device Tools.
2. Press Languages.
3. Select a Language.
4. Press OK.
Image 1
Selection of language
in SPARKvue. The
selected language will
be available the next
time SPARKvue is
restarted.
1
2
3
4
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Main screen and elements
Windows Android
Home
Returns to home page. ● ●
New page
Adds a new page within a SPARKlab. ● ●
Delete Page
Deletes the selected page. This action cannot be undone. ● ●
Device tools
Shows information about software version as well as different
configuration options such as SPARKvue language, available
sensor interfaces, and file management.
● ●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces via
Bluetooth.
● ●
Manage files
Contains commands to manage files, such as copy, move,
and delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue
Shows information about software license, version, and
support contact.
● ●
Sharing
Shows different options to save or export data collection as a
SPARKlab page, journal or image.
● ●
Save file
Saves a SPARKlab. ● ●
Save File as
Saves a SPARKlab allowing users to select name and
location.
● ●
Show a SPARKlab
The Show function is the fastest way to record data and display it in a graph, table, digits display, and meter.
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Windows Android
Online Storage services
Saves a SPARKlab in an online service. ● ●
Export data
Saves a SPARKlab as a tab-delimited text file. ● ●
Export Journal
Saves the journal in a format that can be viewed in a web
browser.
● ●
Print Journal
Allows users to print out the journal. ●
Export images
Saves a snapshot as an image. ● ●
Journal
Keeps a record of an experiment in a series of pictures and
captions.
● ●
Snapshot
Takes a snapshot of a SPARKlab page. ● ●
Help
Shows a user’s guide. ● ●
Legend
Shows observed data in a time sequence, identifying each run by a
different color.
● ●
Linear Graph tools
Opens the tool palette. ● ●
Select
Selects a point or range in a graph. ● ●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, mean, standard deviation, count,
and area.
● ●
Curve fits
Applies a linear, quadratic, power, inverse, inverse
square, or sine fit to a run.
● ●
Scale to fit
Adjusts the scale and position of a selected range or
point to fit it on the screen.
● ●
Prediction
Draws a prediction tracing a continuous curve on the
graph, or touching several points to connect them into a
series.
● ●
Coordinates
Shows an annotation with x- and y-values of a selected
point.
● ●
Slope
Displays the slope at a selected point. ● ●
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Windows Android
Lock
Adjusts the axes to start from zero origin in a multiple y-
axes graph.
● ●
Properties
Allows users to configure the measurement units of each
axis.
● ●
Digits tools
Opens the tool palette. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, mean, standard deviation and
count.
● ●
Properties
Allows users to configure the measurement units. ● ●
Table tools
Opens the tool palette. ● ●
Select
Selects a cell, row, or column. ● ●
Enter text
Adds text. ● ●
New column
Adds a new column to the left of the selected one. ● ●
Remove column
Deletes the selected column. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, mean, standard deviation and
count.
● ●
Properties
Allows users to configure the measurement units of each
column.
● ●
Meter tools
Opens the tool palette. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, and mean.
● ●
Scale to fit
Adjusts the scale and position of a selected range or
point to fit it on the screen.
● ●
Properties
Allows users to configure the measurement units and
sweep range.
● ●
Bar Graph tools
Opens the tool palette. ● ●
Add a bar
Adds a new bar. ● ●
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Windows Android
Scale to fit
Adjusts the scale and position of a selected range or
point to fit it on the screen.
● ●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, mean, and standard deviation
● ●
Show value
Displays data labels outside the end of data points. ● ●
Add a new run
Adds a new run. ● ●
Properties
Allows users to configure the measurement units of each
axis.
● ●
Camera tools
Opens the tool palette. ● ●
Preview
Shows a real-time camera image. ● ●
Capture
Captures a live image from the camera. ● ●
Zoom in
Adjusts the scale and position of an image. ● ●
Zoom out
Adjusts the scale and position of an image. ● ●
Scale to fit
Adjusts the scale and position of a selected range or
point to fit it on the screen.
● ●
Measurements
Measures the distance between two points. ● ●
Eraser
Allows users to erase a measurement. ● ●
Measurement
Allows users to place a measurement on an
image.
● ●
Color
Allows users to change the measurement color. ● ●
Drawings
Adds a drawing on an image. ● ●
Eraser
Allows users to erase a drawing. ● ●
Draw
Allows users to draw on an image. ● ●
Color
Allows users to change the drawing color. ● ●
Annotate
Adds text. ● ●
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Windows Android
Eraser
Allows users to erase an annotation. ● ●
Color
Allows users to change the annotation color. ● ●
Properties
Allows users to configure the camera source. ● ●
Start
Starts data recording. ● ●
Time
Displays data recording time. ● ●
Sampling mode
Shows the sampling mode: Manual or Periodic. In periodic mode
also displays sample rate and sample rate unit.
● ●
Sampling options
Shows options to configure sampling mode and set the automatic
stop conditions.
● ●
Experiment tools
Contains options to manage runs, configure their properties, and
add calculations. Also shows sensor configuration and calibration
options.
● ●
Manage data
Manages runs and images. ● ●
Calibrate sensor
Allows users to calibrate the onboard sensors or the
external ones connected to system.
● ●
Configure sensor
Edits sensor properties such as zero origin. ● ●
Calculated data
Opens a calculator to create expressions using data
measurements. Results can be displayed in any data
display.
● ●
Data properties
Allows users to set the units of each measurement,
define number formats, and display minimum /
maximum values, among others.
● ●
Measurement map
Allows users to modify the measurements assigned to
the display.
● ●
Table of contents
Allows users to change between different displays to monitor
data.
● ●
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
1. Home
2. New page
3. Delete page
4. Device tools
5. Sharing
6. Journal
7. Snapshot
8. Help
9. Legend
10. Graph tools
11. Start
12. Sampling options
13. Experiment tools 14. Table of contents
Show a SPARKlab
1. Connect an external sensor if required. On the Home screen select a Measurement.
2. Press Show.
Image 2
Showing of SPARKlab
in SPARKvue.
Calibrate a sensor
1. On the SPARKlab page press Experiment tools.
2. Press Calibrate sensor.
3. Press OK.
4. Select a Sensor.
5. Select a Measurement.
6. Select the Calibration Type.
a. 2 point (Adjust Slope and Offset).
1
2
3 9
4
5
6
7
8
10
11 12
13
14
1
2
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
b. 1 point (Adjust Offset only).
c. 1 point (Adjust Slope only).
7. Press Next.
8. In the Standard Value box, enter the known value.
9. Press Read from Sensor to transfer the value measured by the sensor to the Sensor Value box.
10. For 2 point calibration the values for Calibration point 2 are required.
11. Press OK.
Image 3
Calibration of sensor
in SPARKvue. Sensor
calibration is an
optional step that can
help make
measurements more
accurate.
1
2
3
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Tare a sensor
1. On the SPARKlab page press Experiment tools.
2. Press Configure sensor.
3. Press OK.
4. Press Edit sensor properties.
5. Select a sensor.
6. Press Zero sensor now.
7. Press OK.
4
5
6
7
8
9
10
11
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Image 4
Zero adjustment of
sensor in SPARKvue.
The tare function sets
the sensor value to
zero. To set the sensor
value to zero
automatically on every
start, leave the Tare
Sensor function on.
1
2
3
4
5
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
6
7
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Set sampling mode
1. On the SPARKlab page press Sampling options.
2. Choose a sampling mode:
a. Periodic sampling mode is the default mode, also known as “continuous” mode. If you choose the
Periodic sampling mode, follow the steps 3 to 5.
b. In Manual sampling mode, a single value from each measurement is recorded each time you
manually trigger SPARKvue. A series of values is recorded in a data set. If you choose this mode,
jump to step number 5.
3. Select a value for Sample rate.
4. Choose the Sample Rate unit.
5. Press OK.
Image 5
Setting of sampling
mode in SPARKvue.
1
2
3
4
5
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Set an automatic stop condition
This feature only can be set up when Periodic sampling mode is used.
1. On the SPARKlab page press Sampling options.
2. In Automatic Stop condition press No Condition.
3. Choose Stop after duration.
4. Set a Value.
5. Select Units.
6. Press OK.
Image 6
Setting of automatic
stop condition in
periodic sampling
mode in SPARKvue.
1
2
3
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Start recording a run of periodically sampled data
1. On the SPARKlab page press Start.
2. To stop data recording press Stop.
Repeat these steps to record another run.
Image 7
Recording of
periodically sampled
data run in SPARKvue.
4
5
6
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Start recording a set of manually sampled data
For manual sampling mode it is typical to use a table to display sampled data.
1. On the SPARKlab page press Table of contents to change to Table display.
2. Press Start. SPARKvue creates a new data set.
3. To record a data point, press Keep. SPARKvue records a single value from each measurement.
4. Repeat the previous step to record all the values of the data set. When the entire set has been
recorded, press Stop.
Image 8
Recording of manually
sampled data run in
SPARKvue.
2
1 2
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Change data display in SPARKlab page
1. On the SPARKlab page press Table of contents.
Image 9
Changing of data
display in SPARKvue.
(1) Graph, (2) Digits, (3)
Table, (4) Meter.
3 4
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Hide / show runs in data display
1. On the SPARKlab page press Legend.
2. Check the boxes to show / hide a specific run.
Image 10
Selection of runs for
data display in
SPARKvue.
Delete a run
1. On the SPARKlab page press Experiment tools.
2. Press Manage Data.
3. Press Manage Runs.
4. Choose an option:
a. Delete Last Run.
b. Delete All Runs.
c. Delete Run. Select the specific run you want to delete.
5. Press OK.
Image 11
Managing runs in
SPARKvue.
1
2
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
2
3
4
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Add a calculation
1. On the SPARKlab page press Experiment tools.
2. Press Calculated data.
3. Press Insert.
4. To insert a measurement into an expression press Measurements.
5. Select a Measurement.
6. To exit the calculator screen press Done.
Image 12
Addition of data
calculation in
SPARKvue. The
calculator screen
allows a user to create
an expression using
collected data; it
contains trigonometry,
statistics, math, and
special functions such
as integral, derivative,
avgfilter, among
others.
5
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
2
3
4
5
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Display a calculation
1. On the SPARKlab page press Graph tools.
2. Press Properties.
3. Choose the axis where you want to display the calculation. Press Measurement.
4. Press User-entered.
5. In Calculated data press Create / Edit calculation.
Image 13
Displaying of data
calculation in
SPARKvue.
6
1 2
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Select data statistics
1. On the SPARKlab page press Graph tools.
2. Press Graph Statistics.
3. Select graph statistics.
4. Press OK.
Image 14
Displaying of data
statistics in SPARKvue.
In any display data
statistics can be
shown, including
minimum value,
maximum value, mean
value, standard
deviation, and count
(number of points). In
a graph, the area
statistic is also
available.
3
4
5
1 2
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Apply a curve fit
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Curve fit.
4. Select the desired curve fit:
a. Linear fit.
b. Quadratic fit.
c. Power fit.
d. Inverse fit.
e. Inverse Square fit.
f. Sine fit.
5. Press OK.
Image 15
Applying of curve fit in
SPARKvue. Curve
fitting is the process of
constructing a curve,
or mathematical
function, which has
the best fit to a series
of data points,
possibly subject to
constraints. Curve
fitting can involve
either interpolation,
where an exact fit to
the data is required, or
smoothing, in which a
"smooth" function that
approximately fits the
data is constructed.
3
4
2 3
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Find the x- and y-values of a point
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Select.
4. Tap a point on the graph.
Image 16
Finding of x- and y-
values of a point in
SPARKvue.
4
5
2 3
4 1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Find the x- and y- difference between two points
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Select.
4. Tap and drag to select data points.
5. Press Done.
6. Press Coordinates.
Image 17
Finding of x- and y-
difference between
two points in
SPARKvue.
2 3
4 1
5
6
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Find the slope on a data point
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Slope.
4. Press the arrows of the Point selector to move the slope tool to nearby points.
Image 18
Finding of the slope
on a data point in
SPARKvue.
Use the built-in camera as an exploration tool
1. On the Home screen, select Camera and press Image.
2. Press Show.
3. Press Camera tools.
4. Press Preview.
5. To capture an image, press Capture.
Image 19
Use of the built-in
camera as an
exploration tool in
SPARKvue.
2 3
4 1
2
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Zoom in / zoom out a camera image
1. Press Camera tools.
2. Press Zoom in or Zoom out.
3. To show the entire image, press Scale to fit.
Image 20
Zoom in / zoom out a
camera image in
SPARKvue.
3
4
5
2 3 1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Calibrate the camera image measurements
1. Press Camera tools.
2. Press Measurements.
3. Tap the first point on the image at one end of the known-length object. Drag the box to the second
point at the other end of the known-length object.
4. Tap the box at one end of the measurement arrow.
5. In the Image Measurement Properties screen enter the Known length.
6. Select the number of Digits.
7. Type the Units.
8. Press OK.
Image 21
Calibration of image
measurements in
SPARKvue.
2 3
5
4
6
7
8
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Measure distance on a camera image
1. Press Camera tools.
2. Press Measurements.
3. Choose a Color in the palette.
4. Tap the first point on the image.
5. Drag the box to the second point.
Image 22
Distance
measurement on an
image in SPARKvue.
Add annotations on a camera image
If there is more than one image, first select the image that the annotation will be attached to.
1. Press Camera tools.
2. Press Annotate.
3. Choose a Color in the palette.
4. Tap the area where you want to add the annotation.
5. Type the text in the Add Note box.
6. Press OK.
Image 23
Addition of
annotations on a
camera image in
SPARKvue.
2
3
1
4
5
2
3
4
8
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Manage camera images
1. On the SPARKlab page press Experiment tools.
2. Press Manage Data.
3. Press Manage Images.
4. Choose an option:
a. Delete All images.
b. Delete Image.
c. Rename image.
Image 24
Managing camera
images in SPARKvue.
5
6
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
2
3
4
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Take a snapshot
1. On the SPARKlab page, press Snapshot.
2. In the Snapshot quick view choose an action:
a. Open the journal.
b. Delete the snapshot.
Image 25
Taking of snapshots in
SPARKvue.
Start a journal
To start working a journal, first you need to take some snapshots.
1. On the SPARKlab page, press Journal.
2. Select a thumbnail.
3. To add or edit a caption, tap the Name box and enter text.
4. To add or edit the notes, tap the Notes box and enter text.
5. To rearrange journal entries, press Move Journal Entry Up / Move Journal Entry Down.
6. To delete a journal entry, press Delete.
7. To close the journal press OK.
Image 26
Recording of a journal
in SPARKvue. The
journal keeps a record
of your work in a
series of pictures and
captions as your
science investigation
progresses.
2.a
1
2.b
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Print a journal
1. On the SPARKlab page, press Sharing.
2. Press Print journal.
Image 27
Printing of the journal
in SPARKvue.
2
3
4
5
6
7
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Export a Journal
1. On the SPARKlab page, press Sharing.
2. Press Export journal.
3. Enter a File name.
4. Press Save.
Image 28
Exporting of the
journal in SPARKvue.
This function saves
the journal in a format
that can be viewed in a
web browser.
2
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
2
3
4
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Save a SPARKlab
1. On the SPARKlab page, press Sharing.
2. Press Save file as.
3. Enter a File name.
4. Press Save.
Image 29
Saving of a SPARKlab
in SPARKvue.
1
2
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Export a SPARKlab
1. On the SPARKlab page, press Sharing.
2. Press Export data.
3. Enter a File name.
4. Press Save.
Image 30
Exporting of a
SPARKlab in
SPARKvue. This
function saves a
SPARKlab as a tab-
delimited text file.
3
4
1
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
2
3
4
48
Copyright © 2014 Intel® Corporation. All rights reserved. Intel® and the Intel® logo are registered trademarks of Intel® Corporation in the
United States and other countries. *Other names and brands may be claimed as the property of others.
Open an Experiment
1. On the Home screen press Experiments.
2. Select an experiment.
3. Press Open.
Image 31
Opening of an
embedded SPARKlab
in SPARKvue.
Open a SPARKlab
The Open function allows users to open an embeded or previously saved SPARKlab.
1
2
3
49
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. an/ord
other countries. *Other names and brands can be reclaimed as the property of others.
Open saved work
1. On the Home screen press Saved work.
2. Select a file.
3. Press Open.
Image 32
Opening of a saved
SPARKlab in
SPARKvue.
1
2
3
50
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Main screen and elements
Windows Android
Home
Returns to home page. ● ●
New page
Adds a new page within a SPARKlab. ● ●
Delete Page
Deletes the selected page. This action cannot be undone. ● ●
Device tools
Shows information about software version as well as different
configuration options, such as SPARKvue language, available
sensor interfaces, and file management.
● ●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces via
Bluetooth.
● ●
Manage files
Contains commands to manage files, such as copy, move,
and delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue
Shows information about software license, version, and
support contact.
● ●
Sharing
Shows different options to save or export data collection as a
SPARKlab page, journal or image.
● ●
Save file
Saves a SPARKlab. ● ●
Save File as
Saves a SPARKlab allowing users to select a name and
location.
● ●
Online Storage services
Saves a SPARKlab in an online service. ● ●
Export data
Saves a SPARKlab as a tab-delimited text file. ● ●
Export Journal
Saves the journal in a format that can be viewed in a web
browser.
● ●
Build a SPARKlab
The Build function allows users to create their own SPARKlab pages; adding elements such as displays for each
measurement, textboxes, and images, among others.
51
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands may be claimed as the property of others.
Windows Android
Print Journal
Allows users to print out the journal. ●
Export images
Saves a snapshot as an image. ● ●
Windows Android
Journal
Keeps a record of an experiment in a series of pictures and captions. ● ●
Snapshot
Takes a snapshot of a SPARKlab page. ● ●
Help
Shows a user’s guide. ● ●
Select a background image
Places an image as a SPARKlab page background. ● ●
Templates
Shows the available page layouts. ● ●
Linear Graph
Adds a linear graph display. ● ●
Select
Selects a point or range in a graph. ● ●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a graph
such as minimum, maximum, mean, standard
deviation, count, and area.
● ●
Curve fits
Applies a linear, quadratic, power, inverse, inverse
square, or sine fit to a run.
● ●
Scale to fit
Adjusts the scale and position of a selected range
or point to fit it on the screen.
● ●
Prediction
Draws a prediction tracing a continuous curve on
the graph, or touching several points to connect
them into a series.
● ●
Coordinates
Shows an annotation with x- and y-values of a
selected point.
● ●
Slope
Displays the slope at a selected point. ● ●
Lock
Adjusts the axes to start from zero origin in a
multiple y-axes graph.
● ●
52
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Windows Android
Properties
Allows users to configure the measurement units
of each axis.
● ●
Digits
Adds a digits display. ● ●
Show statistics
Provides statistics functions to show in a graph
such as minimum, maximum, mean, standard
deviation, and count.
● ●
Properties
Allows users to configure the measurement units. ● ●
Table
Adds a table display. ● ●
Select
Selects a cell, row, or column. ● ●
Enter text
Adds text. ● ●
New column
Adds a new column to the left of the selected one. ● ●
Remove column
Deletes the selected column. ● ●
Show statistics
Provides statistics functions to show in a graph
such as minimum, maximum, mean, standard
deviation, and count.
● ●
Properties
Allows users to configure the measurement units
of each column.
● ●
Bar Graph
Adds a bar graph display. ● ●
Add a bar
Adds a new bar. ● ●
Scale to fit
Adjusts the scale and position of a selected range
or point to fit it on the screen.
● ●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a graph
such as minimum, maximum, mean, and standard
deviation.
● ●
Show value
Displays data labels outside the end of data points. ● ●
Add a new run
Adds a new run. ● ●
Properties
Allows users to configure the measurement units
of each axis.
● ●
53
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Windows Android
Meter
Adds a meter display. ● ●
Show statistics
Provides statistics functions to show in a graph
such as minimum, maximum, and mean.
● ●
Scale to fit
Adjusts the scale and position of a selected range
or point to fit it on the screen.
● ●
Properties
Allows users to configure the measurement units
and sweep range.
● ●
Camera
Adds a camera display. ● ●
Preview
Shows a real-time camera image. ● ●
Capture
Captures an live image from the camera. ● ●
Zoom in
Adjusts the scale and position of an image. ● ●
Zoom out
Adjusts the scale and position of an image. ● ●
Scale to fit
Adjusts the scale and position of a selected range
or point to fit it on the screen.
● ●
Measurements
Measures the distance between two points. ● ●
Eraser
Allows users to erase a measurement. ● ●
Measurement
Allows users to place a measurement on
an image.
● ●
Color
Allows users to change the measurement
color.
● ●
Drawings
Adds a drawing to an image. ● ●
Eraser
Allows users to erase a drawing. ● ●
Draw
Allows users to draw on an image. ● ●
Color
Allows users to change the drawing color. ● ●
Annotate
Adds text. ● ●
Eraser
Allows users to erase an annotation. ● ●
Color
Allows users to change the annotation ● ●
54
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Windows Android
color.
Properties
Allows users to configure the camera source. ● ●
Media
Adds a media element. ● ●
Open a file
Places a media file. ● ●
Delete
Deletes an object. ● ●
Lock
Keeps an object from being modified. ● ●
Text
Adds a text box. ● ●
Assessment
Allows users to design assessment questions and answers. ● ●
Edit
Edits assessment properties. ● ●
Delete
Deletes object. ● ●
Lock
Keeps an object from being modified. ● ●
Start
Starts data recording. ● ●
Time
Displays data recording time. ● ●
Sampling mode
Shows the sampling mode: Manual or Periodic. In periodic mode also
displays sample rate and sample rate unit.
● ●
Sampling options
Shows options to configure sampling mode and set the automatic
stop conditions.
● ●
Experiment tools
Contains options to manage runs, configure their properties, and add
calculations. Also shows sensor configuration and calibration options.
● ●
Manage data
Manages runs and images. ● ●
Calibrate sensor
Allows users to calibrate the onboard sensors or the
external ones connected to system.
● ●
Configure sensor
Edits sensor properties such as zero origin. ● ●
Calculated data
Opens a calculator to create expressions using data
measurements. Results can be displayed in any data display.
● ●
Data properties
Allows users to set the units of each measurement, define ● ●
55
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Windows Android
number formats, and display minimum / maximum values,
among others.
Measurement map
Allows users to modify the measurements assigned to the
display.
● ●
Table of contents
Allows users to change between different displays to monitor data. ● ●
1. Home
2. New page
3. Delete page
4. Device tools
5. Sharing
6. Journal
7. Snapshot
8. Help
9. Templates
10. Select a
background
image
11. Start
12. Sampling
options
13. Experiment tools 14. Table of
contents
2
3 4
5
9
1
6
7
8
10
11
12
13
14
56
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Start a new SPARKlab page
From the home screen
1. Press Build.
Image 33
Creation of a new
SPARKlab page from
the SPARKvue home
screen.
From within an existing SPARKlab
1. Press New Page.
Image 34
Creation of a new
SPARKlab page from
within an existing
SPARKlab in
SPARKvue.
1
1
57
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Delete a SPARKlab page
1. Press Delete Page.
Image 35
Removal of a
SPARKlab page in
SPARKvue.
Add a background image
1. Press Select a background image.
2. Choose an image.
3. Press Open.
Image 36
Addition of a
background image for
SPARKlab page in
SPARKvue.
1
1
58
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Add elements to a SPARKlab page
1. Select a Template.
2. Select a display for each placeholder.
Image 37
Addition of elements
in a SPARKlab page in
SPARKvue.
2
3
1
59
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a new line graph display
1. After selecting a SPARKlab page template, press Line Graph in one placeholder.
2. Press Select Measurement.
3. Select Measurement and Units for horizontal axis (x).
4. Select Measurement and Units for vertical axis (y).
5. Press OK.
6. To configure more options press Graph tools.
Image 38
Creation of a new line
graph display in
SPARKvue.
2
1
60
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
2
3
4
5
6
61
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a new bar graph display
1. After selecting a SPARKlab page template, press Bar Graph in one placeholder.
2. To customize axes labels and units, press X-Axis Variable.
3. Press Measurement.
4. Press User-Entered.
5. Press Create Data Set.
6. Enter Measurement Name.
7. Press OK.
8. Configure Measurement and Units for Vertical Axis (y).
9. Press OK.
10. To configure more options press Graph tools.
Image 39
Creation of a new bar
graph display in
SPARKvue.
1
2
62
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
3
4
5
6
7
8
9
10
63
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Add bars and bar names in bar graphs
1. To add a bar manually, press the bar with muted color.
2. Enter Bar Title and Value.
3. Press OK.
4. A new bar is automatically added. To name it, repeat the steps 3 and 4.
Image 40
Addition of bars and
bar names in bar
graph display in
SPARKvue.
1
2
3
64
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a new table display
1. After selecting a SPARKlab page template, press Table in one placeholder.
2. Press Select Measurement.
3. Configure the number of Columns.
4. Select Measurement.
5. Select Units.
6. Press OK.
7. To configure more options press Table tools.
Image 41
Creation of a new
table display in
SPARKvue.
1
4
65
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
2
3
4
5
6
7
66
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a new digits display
1. After selecting a SPARKlab page template, press Digits in one placeholder.
2. Press Select Measurement.
3. Select Measurement.
4. Select Units.
5. Press OK.
6. To configure more options press Digits tools.
Image 42
Creation of a new
digits display in
SPARKvue.
1
2
67
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a new meter display
1. After selecting a SPARKlab page template, press Meter in one placeholder.
2. Press Select Measurement.
3. Select Measurement.
4. Select Units.
5. Select Sweep Range.
6. Configure Meter Scale.
7. Press OK.
8. To configure more options press Meter tools.
Image 43
Creation of a new
meter display in
SPARKvue.
3
4
5
6
1
68
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
2
3
4
5
6
7
8
69
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Add a text box
1. After selecting a SPARKlab page template, press Text in one placeholder.
2. Enter the text.
Image 44
Creation of a new text
box in SPARKvue.
1
2
70
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Add a media file
1. After selecting a SPARKlab page template, press Media in one placeholder.
2. Press Select a Media File.
3. Select a file.
4. Press Open.
Image 45
Addition of a media
file in SPARKvue.
1
2
71
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Remove or replace a media file
1. Press Media tools.
2. To replace a media file press Open.
3. To remove a media file press Delete.
Image 46
Removal or
replacement of a
media file in
SPARKvue.
3
4
1
2
3
72
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create an assessment
1. After selecting a SPARKlab page template, press Assessment in one placeholder.
2. Press Add an Assessment.
3. Select a Question Type.
4. Based on Question Type complete Question contents.
5. Press Correct Answer.
6. Mark the Correct Answer.
7. Press Save.
Image 47
Creation of an
assessment in
SPARKvue.
1
2
73
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
3
4
5
6
7
74
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
Create a manual data set
1. After selecting a display for one placeholder in the SPARKlab page template, press Select
Measurement.
2. Press Measurement.
3. Press User-Entered.
4. Press Create Data Set.
5. Enter Measurement Name.
6. Enter Unit Name.
7. On Data Properties press Edit.
8. Configure Number Format.
9. Configure Default display Properties.
10. Configure User-Entered Data Configuration.
11. Press OK.
Image 48
Creation of a manual
data set in SPARKvue.
1
3
5
6
2
4
7
75
Copyright © 2014 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or
other countries. *Other names and brands can be reclaimed as the property of others.
8
9
10
11