spark 2000 dc - sikora · iec 479-1 - test voltage range 1 to 7,5 kv dc - easy installation...
TRANSCRIPT
www.sikora.net
SPARK 2000 DCHigh voltage sparktester for Direct Current
ISO 9001
QUALITY
SIKORA
Technical data is subject to change
SPARK 2000 DC High voltage sparktester for direct current
With the SPARK 2000 DC SIKORA fulfills essential require-ments that are demanded for a spark tester today. SPARK 2000 DC is a direct current spark tester, especially devel-oped for the testing of telephone wires, data cables and mini-coax cables with foam insulation, automotive cables and building wires.
The solid electrode and the electronic box of the SPARK 2000 DC form one integral unit. Optionally, the display and control device REMOTE 2000 can be fully integrated.
The spark tester conforms to approved test standards (UL, VDE, CENELEC, BS, AS, CS) and safety regulations as demanded by DIN/VDE 0800, IEC 479-1.
Certified according toDIN EN ISO 9001
Typical features- Reliable detection of defects in the insulation of wires and cables- Fulfillment of major testing standards (BS, VDE, CENELEC, UL, AS, CS, etc.)- Safety standard as demanded by DIN/VDE 0800, IEC 479-1- Test voltage range 1 to 7,5 kV DC- Easy installation
Technical Data SPARK 2020 DCProduct Diameter1.0 to 20 mm
Test Voltage1.0 to 7,5 kV DC
Interfaces- Analog setting of the test voltage 0.5 to 10 V = 1.0 to 7,5 kV- Analog output of the actual test voltage 0.5 to 10 V = 1.0 to 7,5 kV- Profibus-DP (option)- RS485 + RS232 diagnostic interface
Power Supply115/230 V AC ± 10 %, 50/60 Hz
Dimension305 x 189 x 357 mm (width x height x depth)
Technical data is subject to change
SPARK 2000 DC with REMOTE 2000
SIKORA AG (Headquarters)Bruchweide 228307 BremenGermany
Ph.: +49 421 48900 0email: [email protected]
www.sikora.net
UNITED ARAB [email protected]
PDF/
02_1
8