sparc m10-series servers...
TRANSCRIPT
FUJITSU CONFIDENTIAL
SPARC M10-Series Servers
Installation
Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
Objectives
Copyright 2013 FUJITSU LIMITED
■ Perform an initial configuration of the service processor
■ Manage user accounts
■ View the platform environment and hardware configurations
■ Document the characteristics of a Physical Partition
■ Manage Capacity on Demand (CoD)
■ Allocate Building Blocks to a Physical Partition and power it on
■ Access the OpenBoot Prom (OBP) and boot the operating system
■ Run hardware tests to verify the system
2
FUJITSU CONFIDENTIAL
Additional Resources
■ Fujitsu Inc., SPARC M10 Systems Installation Guide, Part Number C120-E678EN, December 2012
■ http://eis/checklists/checklists.html
3 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Installation Tools
■ Phillips screwdriver (#2)
■ T15 Hexlobe Torx screwdriver
■ Stepladder
■ ESD mat and antistatic wrist strap
■ Lifter (hydraulic or mechanical jack)
■ System management terminal
4 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
Installation Procedures
■ Set XSCF user account and password
■ Configure the XSCF
■ Configure Physical Partitions
■ Add the CPU core activation key
■ Set the operating mode for the physical partition
■ Start the physical partition
■ Boot Oracle Solaris
■ Run hardware validation tests
5 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
Extended System Controller Facility (XSCF) Functions
The main functions provided by the XSCF or service processor are:
Security management
Remote server access
Configuration management
Platform monitoring
Server status reporting
Error detection
Capacity on Demand (CoD)
Resource management
6 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
SPARC M10-1 XSCF Serial Cable
Connect the serial cable supplied with the server from the serial port of the XSCF unit (A in the figure) to the system management terminal.
7 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
SPARC M10-1 XSCF LAN Cables
Connect LAN cables of Category 5 or more from the LAN port of the XSCF unit (B in the figure) to the network switch or hub.
8 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
SPARC M10-4/M10-4S Serial Cable
Connect the serial cable supplied with the cabinet from the serial port of the XSCF unit (A in the figure) to the system management terminal.
9 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
SPARC M10-4/M10-4S XSCF LAN Cables
Connect the LAN cables of Category 5 or more from the LAN port of the XSCF unit (B in the figure) to the network switch or hub.
10 Copyright 2013 FUJITSU LIMITED
FUJITSU CONFIDENTIAL
Initial XSCF Login
11 Copyright 2013 FUJITSU LIMITED
login: default
Change the panel mode switch to Locked and press return… Omitted
Leave it in that position for at least 5 seconds.
Change the panel mode switch to Service and press return… Omitted
XSCF>
FUJITSU CONFIDENTIAL
Create a new user account
■ adduser
■ password
■ setprivileges
12 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of the adduser process or press PLAY to continue.
FUJITSU CONFIDENTIAL
XSCF command line navigation tips
Command line editing
13 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of navigation or press PLAY to continue.
FUJITSU CONFIDENTIAL
Verify hardware configuration
■ showhardconf
■ showstatus
14 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of showhardconf & showstatus or press PLAY to continue.
FUJITSU CONFIDENTIAL
View XSCF log messages
showlogs command:
15 Copyright 2013 FUJITSU LIMITED
■ Error log
■ Power log
■ Event log
■ Monitoring log
■ Temperature history
■ Console message log
■ Panic message log
■ IPL message log
Click here to view a video demonstration of showlogs or press PLAY to continue.
FUJITSU CONFIDENTIAL
Configure autologout
setautologout
showautologout
16 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of setautologout & showautologout or press PLAY to continue.
FUJITSU CONFIDENTIAL
Configure Networking for a single BB
■ Verify existing network routes
XSCF> showroute -a
XSCF> setroute -c del -n 0.0.0.0 -g <ip_of_gateway> xscf#0-lan#0
■ Verify the SSCP network
XSCF> showsscp
XSCF> setsscp
■ Configure Admin network 0:
XSCF> setnetwork bb#00-lan#0 -m 255.255.255.0 192.168.10.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#00-lan#0
■ Configure Admin network 1, optional recommended for redundancy:
XSCF> setnetwork bb#00-lan#1 -m 255.255.255.0 192.168.11.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#00-lan#1
■ Set XSCF hostname and domain name:
XSCF> sethostname bb#00 scf0-hostname
XSCF> sethostname -d company.com
XSCF> applynetwork
17 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Configure Networking for a single BB
18 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of setnetwork or press PLAY to continue.
Click here to view a video demonstration of sethostname or press PLAY to continue.
FUJITSU CONFIDENTIAL
Configure Networking for 2 to 4 BBs with no Crossbar box
Configure Admin network 0:
XSCF> setnetwork bb#00-lan#0 -m 255.255.255.0 192.168.10.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#00-lan#0
XSCF> setnetwork bb#01-lan#0 -m 255.255.255.0 192.168.10.12
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 bb#01-lan#0
XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.10.10
Configure Admin network 1, optional recommended for redundancy:
XSCF> setnetwork bb#00-lan#1 -m 255.255.255.0 192.168.11.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#00-lan#1
XSCF> setnetwork bb#01-lan#1 -m 255.255.255.0 192.168.11.12
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 bb#01-lan#1
XSCF> setnetwork lan#1 -m 255.255.255.0 192.168.11.10
Set hostnames and domain name:
XSCF> sethostname bb#00 scf0-hostname
XSCF> sethostname bb#01 scf1-hostname
XSCF> sethostname -d company.com
XSCF> applynetwork
19 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Configure Networking for 5 to 16 BBs with Crossbar boxes
Configure Admin network 0:
XSCF> setnetwork xbbox#80-lan#0 -m 255.255.255.0 192.168.10.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 xbbox#80-lan#0
XSCF> setnetwork xbbox#81-lan#0 -m 255.255.255.0 192.168.10.12
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.10.1 xbbox#81-lan#0
XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.10.10
Configure Admin network 1, optional recommended for redundancy:
XSCF> setnetwork xbbox#80-lan#1 -m 255.255.255.0 192.168.11.11
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 xbbox#80-lan#1
XSCF> setnetwork xbbox#81-lan#1 -m 255.255.255.0 192.168.11.12
XSCF> setroute -c add -n 0.0.0.0 -m 0.0.0.0 -g 192.168.11.1 xbbox#81-lan#1
XSCF> setnetwork lan#1 -m 255.255.255.0 192.168.11.10
Set hostnames and domain name:
XSCF> sethostname xbbox#80 scf0-hostname
XSCF> sethostname xbbox#81 scf1-hostname
XSCF> sethostname -d company.com
XSCF> applynetwork
20 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Configure XSCF time zone and date
List of time zones.
XSCF> settimezone -c settz -a
Set the time zone.
XSCF> settimezone -c settz -s US/Mountain
Set the date.
XSCF> setdate -s MMDDhhmmyyyy.ss
Reboot the XSCF.
XSCF> rebootxscf -a –y
21 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of rebootxscf or press PLAY to continue.
FUJITSU CONFIDENTIAL
Configure XSCF Name Service and NTP
Name Server
XSCF> setnameserver -c del -a
XSCF> setnameserver -c add 10.20.50.1 10.20.60.1
NTP
XSCF> setntp -c del -a
XSCF> setntp -c add 10.20.30.1 10.20.40.1
22 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Configure Network access
Telnet
XSCF> settelnet -c enable
XSCF> showtelnet
SSH
XSCF> setssh –c enable
XSCF> showssh
HTTPS
XSCF> sethttps -c selfsign US Colorado Denver Oracle OU M10-4S-23-
xyz-BB0 [email protected]
Enter passphrase: cangetin
Verifying -
Enter passphrase: cangetin
XSCF> sethttps -c enable
XSCF> showhttps
23 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Configure email report
Specify Mail server information
XSCF> setsmtp
Mail Server []: <ip_address_of_mail_server>
Port [25]:
Authentication Mechanism [none]:
Reply Address []: [email protected]
Enable Mail server reporting
XSCF> setemailreport
Enable E-Mail Reporting? [no]: yes
E-mail Recipient Address []: [email protected]
Do you want to send a test mail now [no]? Yes
24 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Audit Logs
XSCF auditing commands:
showaudit
setaudit
viewaudit
25 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of audit or press PLAY to continue.
Click here to view a video demonstration of viewaudit or press PLAY to continue.
FUJITSU CONFIDENTIAL
Configure for temperature limits and fan speeds
■ Set the altitude
XSCF> setaltitude -s altitude=1000
In this example, the altitude is set to 1000 meters above sea level.
26 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
XSCF firmware version
Check XSCF firmware revision
XSCF> version -c xcp
XSCF#0 (Active )
BB#00-XSCF#0 (Master)
XCP0 (Current): 2031
XCP1 (Reserve): 2031
BB#01-XSCF#0 (Standby)
XCP0 (Current): 2031
XCP1 (Reserve): 2031
27 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Locate new XSCF firmware
Support site URL:
https://support.oracle.com
Extract the firmware.
# unzip p15868518_20xx_Generic.zip.
Result of extraction:
BBXCP20xx.tar.gz
28 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Stage and apply the XSCF firmware
Downloading XSCF firmware from an http Server
XSCF> getflashimage http://imageserver/images/BBXCP20xx .tar.gz
Downloading XSCF firmware from an FTP Server
XSCF> getflashimage ftp://imageserver/images/BBXCP20xx .tar.gz
Downloading XSCF firmware from a USB drive
XSCF> getflashimage file:///media/usb_msd/images/BBXCP20xx.tar.gz
Update the firmware
XSCF> flashupdate -c update -m xcp -s 20xx
Watch console for:
XCP update has been completed
29 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Allocation Capacity on Demand (CoD) Licenses
Install license key
XSCF> addcodactivation <core activation key>
Above Key will be added, Continue?[y|n]: y
Verify the number of permits installed
XSCF> showcod
Assign the licenses
XSCF> setcod -p 0 -s cpu 192
Verify 192 cores are assigned
XSCF> showcod
30 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Verify assigned PSBs
Check the current PPARs
XSCF> showboards –a
Unassign any PSB that is not assigned to PPAR 0.
XSCF> deleteboard -c unassign 01-0 02-0 03-0
31 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of showboards or press PLAY to continue.
FUJITSU CONFIDENTIAL
Partition Component List (PCL)
The setpcl command:
XSCF> setpcl -p 0 -a 0=00-0 1=01-0 2=02-0 3=03-0
setpcl options:
-p ppar_id
-a lsb=psb
32 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of setpcl or press PLAY to continue.
FUJITSU CONFIDENTIAL
The addboard command
addboard command options:
configure
assign
reserve
XSCF> addboard -c assign -p 0 00-0 01-0 02-0 03-0
33 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of addboard or press PLAY to continue.
FUJITSU CONFIDENTIAL
Controlling the Physical Partition (PPAR)
The setpparmode command:
POST Diagnostic level
XSCF> setpparmode -y -p 0 -m diag=max
Messaging
XSCF> setpparmode -y -p 0 -m message=max
Power-saving
XSCF> setpparmode -p 0 -m elastic=off –y
Break Signal
XSCF> setpparmode -p 0 -m break_signal=off
34 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Powering on a PPAR
XSCF> poweron -p 0 -y
PPAR-IDs to power on:00
Continue? [y|n]:y
00:Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs power".
XSCF> poweron -a
PPAR-IDs to power on:00,01,02,03
Continue? [y|n]:y
00:Powering on
01:Powering on
02:Powering on
03:Powering on
*Note*
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs power".
35 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
Powering on a PPAR
36 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of poweron or press PLAY to continue.
FUJITSU CONFIDENTIAL
Connecting to the PPAR using the console command
The console command:
XSCF> console -p 0 -y
Console contents may be logged.
Connect to PPAR-ID 0?[y|n] :y
37 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of console or press PLAY to continue.
FUJITSU CONFIDENTIAL
OpenBoot Prom
Probe for disks
ok probe-scsi-all
View device aliases
ok devalias
View environmental variables
ok printenv
View devices
ok show-devs
Boot Oracle Solaris
ok boot
38 Copyright 2013 FUJITSU LIMITED
Press PLAY (4) to Continue
FUJITSU CONFIDENTIAL
OpenBoot Prom
39 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of obp or press PLAY to continue.
Click here to view a video demonstration of boot or press PLAY to continue.
FUJITSU CONFIDENTIAL
Oracle Validation Test Suite
Start Oracle VTS
cd /usr/sunvts/bin
TTY mode:
./startsunvts -t
GUI mode:
./startsunvts –b
40 Copyright 2013 FUJITSU LIMITED
Click here to view a video demonstration of Oracle VTS or press PLAY to continue.
PROPERTIES
On passing, 'Finish' button: Goes to Next Slide
On failing, 'Finish' button: Goes to Next Slide
Allow user to leave quiz: At any time
User may view slides after quiz: At any time
User may attempt quiz: Unlimited times
FUJITSU CONFIDENTIAL
Summary
■ Perform an initial configuration of the service processor
■ Manage user accounts
■ View the platform environment and hardware configurations
■ Document the characteristics of a Physical Partition
■ Manage Capacity on Demand (CoD)
■ Allocate Building Blocks to a Physical Partition and power it on
■ Access the OpenBoot Prom (OBP) and boot the operating system
■ Run hardware tests to verify the system
42 Copyright 2013 FUJITSU LIMITED
Fujitsu – shaping tomorrow with you