spanish cetme model (c) rifle parts set · pdf filethe kit does not come with a barrel or...

7
ACCEPTS M16 MAGS! 50 Hilton Street, Easton PA 18042 / 610.250.3960 Fax: 610.250.3961 A1 Original Spanish Army assault rifle parts set as issued be- tween 1984 to 1999. A cross over rifle platform developed from the CETME (C) model taking some inspiration from the FNC design which competed for Nato trials around the same time. Like the FNC, the CETME C also would accept M-16 magazines and the 5.56 Nato round. Moreover, the comfort of holding, aiming, and shooting made this platform superior to the G-3 styled rifles and it’s truly ergonomic design made it a world class combat rifle. We like the fact that it is very much a ‘minimalist’ component oriented rifle with fewer parts to man- age than an FAL or G3. This year is the first year ever that we have been able to obtain these extremely rare gun kits. We plan to offer barrels and receivers as we bring this program along, but take heed that at the moment, we have a very limited supply of the kits so don’t suffer in the long run from buyers ‘remorse’ when they are gone! Act now to secure one! Parts set comes with all parts shown. The kit may be missing a spring and detent from the rear sight and the windage screw tip may be missing. The kit does not come with a barrel or receiver. The trunnion does come with the kit. These kits have the Spanish Army green colored finish although parts are used and furniture may have some cosmetic blemishes, but are serviceable. The parts are actually quite rugged and they had to be, as the system of firing was by delayed blowback with a bolt traveling on 2 rollers for both acceleration to forward firing and ‘delay to extract’, by compensating for pressure release. Firing rate for this rifle was between 600 - 750 rds per minute which made it faster than the G3 and equal to and greater than the firing rate of the AK-74! SPANISH CETME (L) PARTS SET, 5.56 NATO www.e-sarcoinc.com IN STOCK! Sarco is pleased to offer these kits in two grades: Good condition CETME L Parts Set ......... $224.99 CET021 Very Good condition CETME L Parts Set . $247.00 CET022 30rd MAGS AVAILABLE! $7.00ea. CET023 SPANISH CETME (L) SPANISH CETME MODEL (C) RIFLE PARTS SET CETME “C” KIT ........................................................................................................................................................................................................................................ $174.99 CET016 SPECIAL SELECTION-based on quality of metal parts ...................................................................................................................................................Add $25.00 ($199.99) CET018 NEW .308 NATO BARREL*-purchased with kit ................................................................................................................................$99.95 CET017 (this price only valid w/purchase of kit) 5 ROUND CETME MAGAZINE .................................................................................................................................................................................................................... $15.95 CET020 20 ROUND CETME MAGAZINE.................................................................................................................................................................................................................. $20.00 CET008 CANVAS CETME SLING.............................................................................................................................................................................................................................. $8.95 SLNG106 LEATHER CETME SLING ........................................................................................................................................................................................................................... $7.95 SLNG071 BRAND NEW CETME BARRELS* AVAILABLE SEPERATELY (without kit) ...........................................................................................................................................$124.95 CET019 * Our Cetme ‘C’ Barrels have muzzle thread pitch of 5/8-24. This common U.S. thread is used on many flash hiders, but will not work w/original Cetme C flash hiders. Cetme “C” receivers in stock! See our 20th ad or our website! Collaboration between German engineers and Franco’s Spanish designers drove Spain to adopt the (C) version of the CETME rifle in 1974. Regarded as the lightweight option, the C rifle was adopted by the Spanish Army, Navy, and Air Force and chambered for the .308 Nato round. The German G-3 and the CETME are close cousins and share many of the same parts. In fact, 25 parts from the CETME and G-3 / HK91, are interchangeable with one another. Another 3 parts from the Trigger pack are also interchangeable as long as they are used as a set. The quality of the parts in this kit are remarkably excellent and outer parts are present with most of their original Parkerizing! Our parts set includes all parts shown in the pictured parts breakdown above including the trunion and other necessary receiver parts for your semi auto build. We have barrels, slings, and 5 round magazines available separately and you can find plenty of low cost 20 rd mags on the market. Additionally we will have receivers available very soon. The kit’s real visual strength is the wooden stock and forend which accentuate the rifle’s appearance and makes it look sporty and more appealing than the plastic furniture of the G-3. These kits are outstanding and we have not had this kind of quality in bulk kits since we had our Argentine FAL kits! STANDARD CETME GOODIES 1. Original hammer springs. These break and are hard to find. Keep a spare! ............................ $3.95 ea, 2 for ..........................$5.95 CET014 2. Original Cetme action covers. Few only, new cond........ $19.95 CET015 3. Original flash hider ....$9.95 CET013 4. Front sight adjusting tool. High grade steel that wont break ........... $6.95, 3 for .................... $17.95 TOOL024 CETME (L) Barrels, receivers & receiver ‘flats’ will be here soon! “L” BARRELS HAVE ARRIVED! New MFG $125.00 each CET024, or $100.00 CET025 when you buy a kit! FAL PARTS SET Long ago we acquired a small lot of early FN manufactured kits from ‘conflict zones’ in the Western Hemisphere, (Americas). Although many of the rifles had sustained battle damage, we have culled these out and can offer you the parts sets of these veteran rifles. These original metric FALs exhibit features of the early ‘G’ series FAL that have been so elusive. The Stock & handguards were in rough condition so we have replaced them with a new original steel military handguard set (value $90.00 – Handguard will be different than pictured) and an original new military period wood buttstock compatible with the early buttplate & swivel, (original buttplate and swivel are included). The barrel has been demilled, but the attaching parts are present including the swivel, regulator, front sight, gas block and late style flash hider. Bolt carrier, bolt assy, cover, charg- ing handle, piston & spring, and other associated parts are present. No upper re- ceiver. Great set of parts for building that Early FAL rifle that you‘ve always wanted. We offer these kits in 2 configurations: A. Complete kit with new wood buttstock and an original FAL metal handguard ............................................................................................................................................. $275.00 FAL297 B. Complete kit without stock and handguard, but with pistol grip .............................................................................................................................................$195.00 FAL298 Don’t miss out on these early FAL kits! - Only have a small lot. ****Also if you purchase a kit, we can offer the following ‘add ons’: ***BIPOD – Original Early Pattern .......................................................................................................... $19.95 ***MAGAZINE LOADER............................................................................................................................. $2.95 ***MAGAZINE, 20 RD............................................................................................................................. $17.95 NEW ORIGINAL METRIC FAL BUTTSTOCK WITH HARDWARE Excellent condition wood stock with buttplate, front cap, and swivel assy w/screws. Complete and ready to install! Always difficult to find complete stocks! ....................................................... $49.95 FALM078 FAL .308 30 rd. MAGAZINES Steel 30 rd. magazine originally issued for the .308 Bren machine gun and the British version of the FAL, (L1A1 Rifle). These magazines are adaptable to the Metric FAL with a little work to the front locking lug which requires a longer ‘beak’ or lug. These are original British military magazines with mark- ings for the L4A1 series of .308 Bren Guns. Magazines are in very good / excellent condition. ...................................................................... $39.00 each, or 2 for ................................................................... $58.00, or 10 for ...................................................................$250.00 BREN124 FAL .308 BARRELS – FM ORIGINAL MILITARY CONTRACT Finally a limited selection of origi- nal FAL barrels has arrived. Grab these up while you can because they’ve become hard to obtain! ‘NEW’ condition Barrels... A. Barrel, w/ gas block, closed ear, non-bipod cut, non-chrome lined .......................................................................................... $199.00 FAL292 B. Barrel, w/gas block, open ear, bipod cut, chrome lined ...... $199.00 FAL291 C. Barrel, w/gas block, open ear, bipod cut, chrome lined ...... $199.00 FAL293 D. Barrel, w/gas block, closed ear, bipod cut, chrome lined ... $199.00 FAL290 E. Barrel, no gas block, non-chrome lined, non-bipod cut ...... $160.00 FAL300 STEN MK3 PARTS SET Properly cut British Sten MKIII parts set with T-Stock, bolt as- sembly w/cocking handle, trigger housing w/internals, cover & screws, magazine housing w/ catch assembly, ejector and front & rear sight, recoil spring and rear caps. Also includes about 1-3/4" of the front muzzle re- ceiver tube with front sight. This kit does not come with barrel. MK3 kit w/o barrel $89.95 STN098 *Almost all states allow ownership of this kit, but we recommend you consult your local & State laws before ordering. STEN MK2 PARTS KIT Properly cut British Sten MKII Parts Set consists of T-buttstock, bolt assy. and recoil spring, magazine housing with catch assy./lock/ejector, trigger housing with internals, cover & screws, rear & front sight, and rear caps. Our fabulous price may not last long as these guns are getting more difficult to find overseas! Get one before they run out. This kit does not come with a barrel. MKII kit w/o barrel $139.95 STN028 MKII kit with barrel $204.90 STN030 *Almost all States allow ownership of this kit, but we recommend you consult your local & State laws prior to ordering. Add a barrel to this kit for the discounted price of $64.95 (barrels regularly $74.95) BRITISH STEN MK-5 PARTS SET Known as the premium model of the WWII Sten SMGs, this Sten features a wooden pistol grip and stock. These kits have been cut to BATF require- ments and have had the magazine, ejector and bar- rel removed, although the front sight assy, is included. This kit also comes with a reprint of the standard WWII Sten manual and a Sten sling. This has always been the best and the rarest of the Sten guns so pick one up before they are gone! ....................................................... $249.95 STN109 STEN MK2 GUN BARRELS MK2 BARRELS – Brand New in the White $74.95 STN029 MK3 Barrels Coming Soon! Just a reminder that Sarco runs a total of 30 amazing pages of inventory every month, so check out all our past issues and keep an eye out for our upcoming ones, too! There are tons of incredible goodies packed into every issue! We also have many items on our website that are not in our ‘print’ ad, so check out E-SARCOINC.COM !

Upload: vuongbao

Post on 26-Mar-2018

236 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

ACCEPTS M16 MAGS!

50 Hilton Street, Easton PA 18042 / 610.250.3960 Fax: 610.250.3961

A1

Original Spanish Army assault rifle parts set as issued be-tween 1984 to 1999. A cross over rifle platform developed from the CETME (C) model taking some inspiration from the FNC design which competed for Nato trials around the same time. Like the FNC, the CETME C also would accept M-16 magazines and the 5.56 Nato round. Moreover, the comfort of holding, aiming, and shooting made this platform superior to the G-3 styled rifles and it’s truly ergonomic design made it a world class combat rifle. We like the fact that it is very much a ‘minimalist’ component oriented rifle with fewer parts to man-age than an FAL or G3. This year is the first year ever that we have been able to obtain these extremely rare gun kits. We plan to offer barrels and receivers as we bring this program

along, but take heed that at the moment, we have a very limited supply of the kits so don’t suffer in the long run from buyers ‘remorse’ when they are gone! Act now to secure one!Parts set comes with all parts shown. The kit may be missing a spring and detent from the rear sight and the windage screw tip may be missing. The kit does not come with a barrel or receiver. The trunnion does come with the kit. These kits have the Spanish Army green colored finish although parts are used and furniture may have some cosmetic blemishes, but are serviceable. The parts are actually quite rugged and they had to be, as the system of firing was by delayed blowback with a bolt traveling on 2 rollers for both acceleration to forward firing and ‘delay to extract’, by compensating for pressure release. Firing rate for this rifle was between 600 - 750 rds per minute which made it faster than the G3 and equal to and greater than the firing rate of the AK-74!

SPANISH CETME (L) PARTS SET, 5.56 NATO

www.e-sarcoinc.com

IN STOCK!

Sarco is pleased to offer these kits in two grades:Good condition CETME L Parts Set .........$224.99 CET021Very Good condition CETME L Parts Set .$247.00 CET022

30rd MAGS AVAILABLE!

$7.00ea. CET023

SPANISH CETME (L)

SPANISH CETME MODEL (C) RIFLE PARTS SET

CETME “C” KIT ........................................................................................................................................................................................................................................ $174.99 CET016SPECIAL SELECTION-based on quality of metal parts ...................................................................................................................................................Add $25.00 ($199.99) CET018NEW .308 NATO BARREL*-purchased with kit ................................................................................................................................$99.95 CET017 (this price only valid w/purchase of kit)5 ROUND CETME MAGAZINE ....................................................................................................................................................................................................................$15.95 CET02020 ROUND CETME MAGAZINE ..................................................................................................................................................................................................................$20.00 CET008CANVAS CETME SLING ..............................................................................................................................................................................................................................$8.95 SLNG106LEATHER CETME SLING ...........................................................................................................................................................................................................................$7.95 SLNG071BRAND NEW CETME BARRELS* AVAILABLE SEPERATELY (without kit) ...........................................................................................................................................$124.95 CET019 * Our Cetme ‘C’ Barrels have muzzle thread pitch of 5/8-24. This common U.S. thread is used on many flash hiders, but will not work w/original Cetme C flash hiders.

Cetme “C” receivers in stock! See our 20th ad

or our website!Collaboration between German engineers and Franco’s Spanish designers drove Spain to adopt the (C) version of the CETME rifle in 1974. Regarded as the lightweight option, the C rifle was adopted by the Spanish Army, Navy, and Air Force and chambered for the .308 Nato round. The German G-3 and the CETME are close cousins and share many of the same parts. In fact, 25 parts from the CETME and G-3 / HK91, are interchangeable with one another. Another 3 parts from the Trigger pack are also interchangeable as long as they are used as a set. The quality of the parts in this kit are remarkably excellent and outer parts are present with most of their original Parkerizing!

Our parts set includes all parts shown in the pictured parts breakdown above including the trunion and other necessary receiver parts for your semi auto build. We have barrels, slings, and 5 round magazines available separately and you can find plenty of low cost 20 rd mags on the market. Additionally we will have receivers available very soon. The kit’s real visual strength is the wooden stock and forend which accentuate the rifle’s appearance and makes it look sporty and more appealing than the plastic furniture of the G-3.

These kits are outstanding and we have not had this kind of quality in bulk kits since we had our Argentine FAL kits! STANDARD

CETME GOODIES1. Original hammer springs. These break and are hard to find. Keep a spare! ............................ $3.95 ea, 2 for ..........................$5.95 CET0142. Original Cetme action covers. Few only, new cond ........$19.95 CET0153. Original flash hider ....$9.95 CET013 4. Front sight adjusting tool. High grade steel that wont break ...........$6.95, 3 for .................... $17.95 TOOL024

CETME (L)

Barrels, receivers & receiver ‘flats’ will be here soon!

“L” BARRELS HAVE ARRIVED!

New MFG $125.00 each CET024, or $100.00

CET025 when you buy a kit!

FAL PARTS SETLong ago we acquired a small lot of early FN manufactured kits from ‘conflict zones’ in the Western Hemisphere, (Americas). Although many of the rifles had sustained battle damage, we have culled these out and can offer you the parts sets of these veteran rifles. These original metric FALs exhibit features of the early ‘G’ series FAL that have been so elusive. The Stock & handguards were in rough condition so we have replaced them with a new original steel military handguard set (value $90.00 – Handguard will be different than pictured) and an original new military period wood buttstock compatible with the early buttplate & swivel, (original buttplate and swivel are included). The barrel has been demilled, but the attaching parts are pres ent including the swivel, regulator, front sight, gas block and late style flash hider. Bolt carrier, bolt assy, cover, charg-ing handle, piston & spring, and other associated parts are present. No upper re-ceiver. Great set of parts for building that Early FAL rifle that you‘ve always wanted.

We offer these kits in 2 configurations:A. Complete kit with new wood buttstock and an original FAL metal handguard .............................................................................................................................................$275.00 FAL297B. Complete kit without stock and handguard, but with pistol grip .............................................................................................................................................$195.00 FAL298Don’t miss out on these early FAL kits! - Only have a small lot.****Also if you purchase a kit, we can offer the following ‘add ons’:***BIPOD – Original Early Pattern .......................................................................................................... $19.95***MAGAZINE LOADER .............................................................................................................................$2.95***MAGAZINE, 20 RD............................................................................................................................. $17.95

NEW ORIGINAL METRIC FAL BUTTSTOCK WITH HARDWAREExcellent condition wood stock with buttplate, front cap, and swivel assy w/screws. Complete and ready to install! Always difficult to find complete stocks! .......................................................$49.95 FALM078

FAL .308 30 rd. MAGAZINESSteel 30 rd. magazine originally issued for the .308 Bren machine gun and the British version of the FAL, (L1A1 Rifle). These magazines are adaptable to the Metric FAL with a little work to the front locking lug which requires a longer ‘beak’ or lug. These are original British military magazines with mark-ings for the L4A1 series of .308 Bren Guns. Magazines are in very good / excellent condition. ......................................................................$39.00 each, or 2 for ................................................................... $58.00, or 10 for ...................................................................$250.00 BREN124

FAL .308 BARRELS – FM ORIGINAL MILITARY CONTRACTFinally a limited selection of origi-nal FAL barrels has arrived. Grab these up while you can because they’ve become hard to obtain! ‘NEW’ condition Barrels...A. Barrel, w/ gas block, closed ear, non-bipod cut, non-chrome lined ..........................................................................................$199.00 FAL292B. Barrel, w/gas block, open ear, bipod cut, chrome lined ......$199.00 FAL291C. Barrel, w/gas block, open ear, bipod cut, chrome lined ......$199.00 FAL293D. Barrel, w/gas block, closed ear, bipod cut, chrome lined ...$199.00 FAL290E. Barrel, no gas block, non-chrome lined, non-bipod cut ......$160.00 FAL300

STEN MK3 PARTS SET Properly cut British Sten MKIII parts set with T-Stock, bolt as-sembly w/cocking handle, trigger housing w/internals, cover & screws, magazine housing w/catch assembly, ejector and front & rear sight, recoil spring and rear caps. Also includes about 1-3/4" of the front muzzle re-ceiver tube with front sight. This kit does not come with barrel. MK3 kit w/o barrel $89.95 STN098*Almost all states allow ownership of this kit, but we recommend you consult your local & State laws before ordering.

STEN MK2 PARTS KITProperly cut British Sten MKII Parts Set consists of T-buttstock, bolt assy. and recoil spring, magazine housing with catch assy./lock/ejector, trigger housing with internals, cover & screws, rear & front sight, and rear caps. Our fabulous price may not last long as these guns are getting more difficult to find overseas! Get one before they run out. This kit does not come with a barrel. MKII kit w/o barrel $139.95 STN028MKII kit with barrel $204.90 STN030*Almost all States allow ownership of this kit, but we recommend you consult your local & State laws prior to ordering.Add a barrel to this kit for the discounted price of $64.95 (barrels regularly $74.95)

BRITISH STEN MK-5 PARTS SETKnown as the premium model of the WWII Sten SMGs, this Sten features a wooden pistol grip and stock. These kits have been cut to BATF require-ments and have had the magazine, ejector and bar-rel removed, although the front sight assy, is included. This kit also comes with a reprint of the standard WWII Sten manual and a Sten sling. This has always been the best and the rarest of the Sten guns so pick one up before they are gone! ....................................................... $249.95 STN109

STEN MK2 GUN BARRELSMK2 BARRELS – Brand New

in the White $74.95 STN029

MK3 Barrels Coming Soon!

Just a reminder that Sarco runs a total of 30 amazing pages of inventory every month, so check out all our past issues and keep an eye out for our upcoming ones, too! There are tons of incredible goodies packed into every issue! We also have many items on our

website that are not in our ‘print’ ad, so check out E-SARCOINC.COM !

Page 2: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

NEW ITEM!

OUR GUARANTEE - Our guarantee is simple and easy to understand. If you are not satis-fied with any item received from us you have 5 days to return it for a replacement or a refund of the advertised price. All returns must be accompanied by a letter WITH YOUR INVOICE NUMBER and explanation of the problem. All returns must be in the same condition as you received them-any alterations or work will void the guarantee. Special order items not return-able. We can not accept returns on TOOLS unless the tool is defective. We do not refund any shipping costs unless the error/problem causing the return is our fault. Returns may be sub-ject to 10% restocking charge. Send all shipments pre-paid. CODs will be refused. Any items returned due to customer’s error are subject to a 10% restocking charge. ($2.00 minimum). As we do not install the parts we sell, we cannot guarantee they will function when installed by others. For proper function and safety, many gun parts should be installed by a competent gunsmith - see our disclaimer:

SHIPPINGALL ORDERS WILL BE RECEIVED, PRO-CESSED AND SHIPPED OUT OF OUR PENN-SYLVANIA LOCATION.MINIMUM SHIPPING AND HANDLING CHARGES START AT: $9.50Rifle Stocks and Barrels…. $12.50Call for larger items on prepaid orders* NJ residents please add 7% sales tax. Not all items available to NJ residents.* PA residence please add 6% sales taxAll orders to Alaska and Hawaii shipped via US Mail, unless customer specifically requests Blue or Red Label UPS (not available for online orders). Employees not authorized to modify prices or conditions stated in this advertisement.

Our ads in the Shotgun News are catalogue prices and may not reflect any sales or higher pricing found on our website.

REGARDING LOCAL, CITY & STATE REGULATIONS!

SARCO makes a large effort to keep abreast of state & local gun laws. With over 20,000 laws on the books this is a Herculean and impossible job. Some of the products sold by SARCO could be restricted for sale in your local area, while not restricted nationally. This could include, but not be limited to firearms, ammo, parts, high cap mags, edged weapons, air guns, etc. You must deter-mine your right to purchase, own, use or resell specific products offered by SARCO in your jurisdiction. As local laws are constantly changing, it your responsibil-ity to determine if a product is prohibited before ordering from SARCO. You warrant by ordering from SARCO that you are a legal adult without any legal restrictions from ordering and are complying with all state, local, and federal laws. Please check your local laws before ordering.

RETURNSWe offer a 5-day inspection period on all of our merchandise, except for special order items which are not refundable. Items that state they are sold “as-is” are not return-able.· PHONE ORDERS, EMAILED, FAXED OR MAILED-IN ORDERS: You will need a Return Authoriza-tion Number to return something. Please email [email protected] or call (610) 250-3960for a RT #. Feel free to check on the status of your return, credit or refund.· ONLINE ORDERS: Please visit our website www.e-sarcoinc.com and click the Return Policy link. Fill out the printable form and mail it back with your package. Feel free to email our e-Comm department at [email protected] to check on the status of your return or call (610) 250-3960 and ask to be transferred to the e-Commerce Department.We do not refund any shipping cost unless the error/problem causing the return is our fault.Returns may be subject to a 10% restocking charge.

ORDER PROBLEMS,Damaged or Missing Packages

Call (610) 250-3960 and ask for Liz ext 208 or email [email protected] BACK-ORDERS Check the status of an existing Backorder, Call (610) 250-3960 or email: [email protected] SARCO deals in modern as well as obsolete and hard to find merchandise and offers full & prompt refund on any cancelled backorders prior to ship. WEBSITE Questions or Issues Call (610) 250-3960 and ask to be transferred to the e-Commerce Department or email [email protected] INTERNATIONAL Call (610)250-3960 and ask for Mike ext 210 or email [email protected]

Sarco only sells products to persons 18 years or older

To our Alaskan friends – Please note we can now ship to you via UPS Ground Service

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.250.3961

ABOUT HIGH CAPACITY MAGAZINES:Although we try to stay abreast of current State gun laws, it is a herculean task with over 20,000 laws on the books. By ordering, you are stating that you are complying with your Local & State laws. Most States allow large capacity maga-zines. Some do not. If you are unsure on this issue, contact your Local or State law enforcement to confirm what is allowed. This is a partial list of States with some hi-capacity restrictions: NJ, NY, MA, MD, HI, KS, CO, CT, IL and vari-ous county laws therein including Chicago, D.C.

Prices are subject to change without notice. We are not responsible for typographical errors or misprints

DISCLAIMERParts sold by Sarco should be in-stalled only by a competent gun-smith. These products are sold as is and without a warranty. No liability is expressed or implied for damage or injury which may result from the improper instal-lation or use of these products.

B1

www.e-sarcoinc.com

UZI PARTS SETOur quality Uzi Parts Sets are the best in the country and our prices on them are the cheapest! And unlike other kits on the market, ours have the barrel trunion, new barrel, & receiver parts. Three grades available:

UZI BOLTSBrand new Original military first time we have had these in years! Get yours now before the few are gone. Brand new orig. ............................. $65.00 ea. UZI 009Also have Uzi bolt, complete ......................................$80.00 UZI011

UZI BUTTSTOCK ASSORTMENT (all original)

1. Used wood butt stripped good cond

.............................$10.00 UZI1272. New stripped (wood only) .............................$19.95 UZI0833 Wood stock complete excellent w/ metal ....................$29.95 UZI1314 New wood stock w/excellent metal .............................$39.95 UZI084

UZI HANDGUARD SET w/SCREWSExcellent condition .............$19.95 UZI031Good condition ...................$12.00 UZI029UZI Pistol Grip Set w/ScrewsGood condition ..................$12.00 GRP149UZI Return Spring Assy, available again ..............................................$9.95 UZI015

UZI PARTS AND ACCESSORIESYou better grab a few of these when you are ordering your parts set! The prices listed here are especially reduced for buyers of our UZI parts sets only!1. Original Israeli 6 magazine pouch,VG UZI136 .............................................$8.95ea, 4 for $29.952. Sight adjusting tool, Type A UZI086 .........................................................................................$9.953. Original sling w/leather loops SLNG020 ...................................................................................$9.954. Cleaning rod – Brass UZI082 ...................................................................................................$8.005. Original UZI muzzle cover UZI138 ............................................................................................$2.95 PACKAGE DEAL – One of each of #1 to 5 above items. Value $39.80 – Special ........... $21.50 UZI1436. Uzi Sub Component Parts Pack - trunion, rear sight base/stock mount & center grip mounting section of receiver. This is for those of you who got demilled or damaged trunions, these are PERFECT! ..............................................................................................$59.95 UZI109

ORIGINAL UZI COMPLETE TRIGGER HOUSING ASSEMBLIES & IN VG-EXCELLENT CONDITIONComes complete with special pin to attach to receiver $64.95 UZI129 Not for sale in WA. state

!! NEW UZI SMG BARRELS !! BACK IN STOCK AGAIN!

Brand new production – Perfect if you bought an Uzi kit without a barrel! Others get $100.00 to $125.00. Sarco price ..............................$84.95, 3 for .........................................$239.95 UZI142

ATTENTION – EASTON SHOWROOM CUSTOMERSRe: In Stock Inventory – If you are planning on visiting the showroom, feel free to call ahead to make sure that we stock the item(s) that you need. Please give us a least a few days’ notice before your visit in case we need to retrieve goods in from our other warehouses. Note that the prices in Shotgun News are dealer prices and may not be the same prices as in our showroom.

PHONE ORDER – Call (610) 250-3960ONLINE ORDER – Go to www.e-sarcoinc.comFAX ORDER – (610) 250-3961MAIL ORDER – Sarco Inc, 50 Hilton St, Easton PA 18042SHOWROOM VISIT – Mon-Sat 10am-5pm / Friday Opened til 8pm

See our website for complete list of Uzi parts!!

SUPER SPECIAL BUY OF ANY 3 KITS LISTED HERE, AND TAKE AN EXTRA 5% OFF!

A. STANDARD GRADE Like everyone else’s kits (Utility kit) ...........................................................................................$214.95 UZI106 Or if you like, without barrel ........................................................................................................................................$139.95 UZI141B. SELECT GRADE PARTS SET- good to very good with better metal and plastic furniture than the utility kit ...................................................................................................$259.95 UZI107 Or if you like, without barrel ........................................................................................................................................$179.95 UZI139C. SUPER SELECT GRADE PARTS SET- Best kits/ excellent condition. Grip panels and forend are exc to like new ...................................................................$299.95 UZI108 Or if you like, without barrel ........................................................................................................................................$225.00 UZI140

Back 3½" of an original Thompson 1928 receiver – Auto Ordnance, exc condition

with markings $49.95 SALE! $29.95 TMP182 few only!

SARCO THOMPSON SPRING KITReplace tired and worn springs in your Thompson. Kit contains one each: Sear Spring, Ejector, Dis-connector Spring, Firing Pin Spring, Recoil (Main) Spring, & Trigger Spring. A $26.00 value. OUR SPECIAL PRICE $14.95 TMP005

NEW THOMPSON G.I. EXTRACTORSWe had a long dry spell – just got a new

pile! $26.00 TMP010

1928 THOMPSON STOCK ATTACHING SLIDE ASSEMBLYNew production – first time avail-able complete w/latch $49.95, 3 for ....................$120.00 TMP179

NEW ITEM!

SPECIAL 1928 THOMPSON COMPLETE STOCK SETS

Stock & forends are new – PG’s are new but show signs of 50 years storage. Buttstock, horiz forend,

and pistol girp. Model 1928 $39.95 TMP133

THOMPSON ACCESSORY KIT1928 Gun cover, horizontal foregrip, Drum pouch, Sling, Mag pouch, Cleaning rod, Bore brush, Spare parts pouch. Value $107.95 Sarco Special $59.50 TMP189M-1 & M1A1 Gun cover, Mag pouch, Sling, Orig cleaning rod, Bore bursh, Spare parts pouch\ Value $82.50 Sarco Special $29.95 TMP190

1928 THOMPSON LYMAN ADJUST-ABLE REAR SIGHTSLast chance at a cheap price. We bought up the source. $265.00, TMP047 Almost new condition (we used to sell these for $300.00)

THOMPSON SURVIVAL KITSGet all of the vulnerable Tommy Gun parts in one package. Two different models available:A. M1928 Support Set B. M1 Support Kit Ejector Ejector Hammer Pin BufferBolt Trigger springTrigger spring Sear springSear spring Frame latchFrame latch Frame latch springHammer SelectorDisconnector DisconnectorRocker HammerStock Sear leverRetail value $180.00 Retail value $80.00TMP109 TMP105 Special kit price Special kit price$64.50 $36.503 for $178.95 3 for $99.95

Original Issue!

THOMPSON 1928, M1 & M1A1 SLINGCurrent production – identical to original. Can’t believe we never produced these before. WWII Khaki sling ............................. $18.95 SLNG038

WW2 THOMPSON GUN BAGD50268 - Early WWII case held the gun without the magazine. Heavy “duck” canvas with durable brass zipper just like the original................................................... $30.00 TMP191

THE “SPECIAL” THOMPSON M1 & 1928 RECOIL SPRING BY SARCO Sarco springs have closed ends to keep your spring from unwinding. Original springs don’t have this ....................................................................... $6.00 or get a spare too at 2 for ....................$9.95 TMP032

THOMPSON NEW PRODUCTION 3 POCKET 30RD MAGAZINE POUCH .......................$12.95 TMP184

U.S. 5 CELL THOMOPSON POUCH FOR 20 RD. Magazines Standard WW2 style pouch to hold 5 -20 rd. magazines.............$14.95 TMP192

THOMPSON HORIZONTAL FOREGRIP Unstained Walnut forend. Perfect for replacing chipped and worn out wood on your SMG.........$17.95 TMP014

THOMPSON 50 RD. DRUM POUCH Heavy khaki canvas pouch with shoulder strap embossed with U.S. marking. Will also carry the Auto Ordnance 40 & 10 rd. 1927A1 drums. $24.95 or 3 for $59.95 TMP093

REPLACEMENT 1928 THOMPSON STOCK ASSEMBLIESJust in the door. Complete with attaching slide and butt-plate. Wood is new G.I. Slide assembly is new. Buttplate VG ............ $99.95, 3 for ..................................... $239.95 TMP178

NEW ITEM!

NEW THOMPSON WALNUT STOCKS SETS For M1 & M1A1 Thompson available again. Stock, forend & pistol grip ...................$69.95 TMP155

1928 THOMPSON BOLTSOriginal G.I. 1928 Thompson bolts new in the green wrap. $100.00 + elsewhere - Our Special ..............................................................$49.95, 5 for ................................................... $199.95, 20 for.................................................. $599.00, 100 for .................................. $2000.00 TMP056

THOMPSON GUN COVERUsed extensively in WW2 & Korea for holding a ‘ready’ Thompson while travelling in vehicles. A Thompson could quickly be pulled out and fired since the stick magazine was already installed .. $34.95 TMP188

THOMPSON VERTICAL FOREGRIPBeautiful walnut wood grip with correct contouring as used on the 1921 and 1928 Thompson SMGs. Trigger grooves are rounded and not slab sided like some on the market. Made like the original! .....$19.95 or 3 for .......................................$54.95 TMP015Screw for the above grip ..............$12.50 TMP016

ORDERING INSTRUCTIONS~ There are different procedures for Ordering PARTS vs Ordering FIREARMS ~

UZI SMG

UZI SMG BARRELSBrand new production ...........................$84.953 for ........................................$239.95 UZI142

WINCHESTER '97 TRENCH GUN BAYONET LUG & HEAT SHIELD & FRONT SLING SWIVELAccurate reproduction of this rare accoutrement - takes 1917 Enfield bayonet. Has brass front sight & attaching screws ......................................... $113.95 W97058

THOMPSON SMG PARTS & ACCESSORIES

12 GAUGE BLANK BARRELS Terrific barrels for replacing shot out or troubled shotgun barrels or that special project gun you are working on.BB009 - 12 gauge un chambered smooth bore 27 ½ 1.062 OD 4140 steel ............................$19.95BB011 - 12 gauge un chambered rifled bore 25½ 1.312 od 4140 steel ...................................$44.95BB012 - 12 gauge un chambered rifled bore 27 ½ 1.312 od 416ss .........................................$44.95 JUST IN! BARREL BLANKS FOR PROJECTSBB013 - 9mm 1-10 twist 17" .980 od 4140 no chamber ........................................................$29.95BB014 - 22 cal 1-9 twist 24 ½ .980 od 4140 no chamber .....................................................$29.95BB015 - 30 cal 1-10 twist 18 ½ 1.312 od 416SS no chamber ...............................................$29.95SPECIAL for any barrel blanks in this box – Buy 3, Take Off 5%, Buy 10, Take Off 10%

REPLACEMENT BARREL FOR THE RUGER® 10-22® CHARGER PISTOLMade by top US barrel mfg. 22LR, factory contoured and 10 1/2” long (muzzle is threaded for flashiders & suppressors) ...................................................................................................................$59.95 RGR012

HARRINGTON & RICHARDSON SHOTGUN BARRELSOriginal H&R Shotgun barrels which are new, old stock. Getting hard to find these! May have slight cosmetic surface rust spots (very minor), but generally the finish is like new and any wear would be from the barrels being boxed together over the years. Four varieties available. Very limited so act fast!A. Model 440, 12 ga, 3" chamber, Full Choke, w/Front Sight, 26 Inch length .................................... $49.95 MISC480B. Model 440, 12 ga, 3" chamber, Im-proved cylinder, w/ Front Sight, 24 inch length .......................... $49.95 MISC481C. Model 442, 20 ga, 3" chamber, Im-proved cylinder, Ribbed w/ Front Sight., 24 inch length ............. $59.95 MISC482D. Model 442, 12 ga, 3" chamber, Im-proved cylinder, Ribbed w/ Front Sight., 24 inch length ............. $59.95 MISC483

PROJECT BARRELS FOR THE RUGER® 10/22®Sarco brings you a terrific selection of new barrels for your Ruger® 10/22® firearms project. We offer 4 caliber selections. In some cases, these barrels just need to be polished and crowned on the muzzle end. A few will need other finishing touches. Compare at $99.00. See notes below:1. .17 caliber HM2 SS, 18 inches long 920 O.D. Ready to Go! $65.00 RGR007 2. .17 caliber HM2 4140, 24 inches long 920 O.D. needs to be polished and crowned ......................................................................................................................$50.00 RGR0083. .17 caliber HM2 SS, 20 inches long 920 O.D. needs to be polished and crowned .........$50.00 RGR0104. .22 caliber Magnum, 4140, 24.5 inches long 920 O.D. needs to be polished and crowned ...................................................................................................................................$50.00 RGR0035. .17 caliber HMR SS, 18.25 inches long 920 O.D. needs to be polished and crowned ....$50.00 RGR006PLEASE NOTE: .17 HMR is for 10/22 Magnum rifles only! This is not a recommended conversion as you would need a heavy bolt and heavy recoil spring. Chamber pressure is too great and is problematic in semi autos. This is only for the advanced gun builder and when assembled, should be carefully checked by a quali-fied gunsmith.*****.17 HM2 REQUIRES USE OF A HEAVY BOLT.*****.22 MAGNUM- REPLACEMENT FOR ORIGINAL GUNS ONLY. WILL NOT FIT THE 10/22 LONG RIFLE

Page 3: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

SKS “T”–TYPE SIGHT TOOLTool for adjusting elevation of the front sight post on the SKS rifle. Will also work on AK47-types and Tokarev rifle front sights. All steel, made in USA ............................ $3.95 ea. SKS042, 3 for .......................................$9.95

ORIGINAL SKS STRIPPER CLIPS 3 for ...................................$2.95 10 for...................... $7.95 STC024

WALTHER P-38 & P-1 PARTSAutomatic firing pin lock late ................$4.00 P38007Ejector ..........$5.00 P38018Firing pin post war ....$9.95 P38012Firing pin spring ........$5.00 P38002Locking block .........$28.00 P38049Locking block operating pin ......... $4.95 P38048Sear ...........................................$25.00 P38023Slide stop...................................$12.00 P38040Slide stop return spring ............... $4.00 P38037Extractor ...................................$20.00 P38013Extractor plunger & spring .......... $4.95 P38063WWII style flat firing pin ............$29.95 P38011

See our website for complete listing of P38 parts

ORIGINAL SKS SPIKE BAYONETBrand New Bayonets Stripped ......$3.95, 3 for ..............................$10.00 BAY031Complete as shown ......................$9.95,3 for ..............................$27.95 SKS039

EXCELLENT REPRODUCTION OF WWII WALTHER P38 PLASTIC GRIPSComplete with inside mark-ings….$24.95 GRP202

SKS/AK ‘C’ TYPE SIGHT TOOLThe original unbreakable car-bon steel “C” tool. The “C” tool enables elevation and windage adjustments to the front sights of AKM, SKS, Galil, and similar semi-automatic rifles. $9.95, 3 for $24.95 SKS041

BRAND NEW SET OF P-38 & P-1 RECOIL SPRINGSSprings loose their power and set in 60 years. So treat your P-38 or P-1 to new life, or put a set away for when it gets ill or both .............$4.95, 2 sets for ....................................$7.95 P38046

P38 SPRING KIT (put away)• Firing pin spring • Hammer lever spring • Retainer latch plunger spring Recoil springs (2) Value $17.50 $7.45 P38057

P38 FIRING PINS (EARLY STYLE)SARCO has the original style firing pin as used in wartime P38 pistols. This has a flat section in the middle and different contours on the back end. This is the correct pin to use in WWII and earlier era slides. Sold elsewhere for over $37.00 - Sarco price .........................................$24.95 P38011

SVT-40 TOKAREV RIFLE SPARES PACKSarco has a new spares pack for the venerable SVT-40 Tokarev Rifle. These parts just came in and we can offer you an unbeatable deal on this parts package. Pack consists of Bolt with Extractor, Front End-gas housing & flash hider, Rear Sight-complete, Trigger Housing complete, and Piston Rod. Normally these parts would fetch $350.00, but Sarco’s special price is ......................................................... $64.95, 3 for ................................... $179.95 TOK089

SKS Original bayo attaching screw for SKS spike bayonet ........$4.95 SKS096

FOR OUR LINE OF P38 HOLSTERS, SEE OUR “Y” PAGE!

We have assortment of SKS Stocks – See our website!

C150 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.250.3961

MAKAROV LANYARDOriginal, new $4.50 MAK010

LEATHER M3 GREASE GUN SLINGOut of South America we were able to acquire some military M3 slings and bring them back. Sling has brass studs on the ends. Been out of stock for quite a while! ......................................$12.50 GG063

www.e-sarcoinc.com

1903 SPRINGFIELDSPF001 Band Front Sight 1903 .........................$13.50 SPF002 Band Front Sight 1903A3 .....................$12.00 SPF253 Band Lower, new GI blue 1903 .............$25.00SPF011 Band Lower (milled) 1903 .....................$20.00 SPF012 Band Lower w/Swivel (milled) 1903 ............................................................$23.95 SPF014 Band Lower w/Swivel (stamped)1903A3 ........$17.50 SPF018 Band Screw Upper Band 1903................ $3.00 SPF019 Band Screw Upper Band 1903A3 ........... $3.00 SPF263 Band & Hardware Set, milled 1903.......$54.95SPF265 Band & Hardware Set, 1903A3 .....................$49.95SPF003 Base rear sight (not sleeve) ...................$12.00SPF306 Bolt, early smooth body, bent handle .......$125.00SPF374 Bolt, early smooth body, Nickel Steel........$200.00SPF004 Bolt Late (complete) ..............................$42.00 SPF005 Bolt Late (stripped) ...............................$20.00 SPF385 Bolt sleeve complete w/lock assembly & safety ............................................................$26.95SPF008 Bolt Sleeve (stripped) ............................$15.00SPF009 Bolt Sleeve Lock ..................................... $4.75 SPF010 Bolt Sleeve Lock Spring .......................... $1.75SPF384 Bolt sleeve w/lock & spring ...................$19.95SPF352 Bolt stripped & welded in firing pin hole 1903(A3) .............................$3.95, 5 for $14.95SPF351 1901 era, Springfield bolt body, smooth, not heat treated ............................................... $300.00SPF357 Bolt R marked for early Remington 1941-42, stripped ................................................$65.00SPF358 Bolt BF (Barney Forge) Springfield 1941 & 42, stripped ................................................$45.00SPF359 Bolt 1903A3 SA stripped for early A3’s .............................................................$45.00BRUSH-001 Bronze bore brush 30 cal ...............10/$9.95SPF091 Butt Swivel (milled) 1903 ........................ $6.50 SPF061 Butt Swivel (stamped) 1903A3 ................ $5.00

SPF016 Buttplate (milled) 1903(used) ................$20.00 SPF291 Buttplate New G.I. milled 1903 .............$30.00SPF015 Buttplate (stamped) 1903A3 used .........$15.00 SPF121 Buttplate Milled fine checkered ............$34.95SPF257 Springfield Composition Drill Rifle Stocks, G.I., used, VG-Exc ................................$34.95SPF020 Cutoff..................................................... $8.50 SPF021 Cutoff Plunger ........................................ $2.00SPF023 Cutoff Screw .......................................... $2.00 SPF024 Cutoff Spindle ........................................ $3.50SPF022 Cutoff Spring ......................................... $1.50SPF342 Die cast buttplate assemblies for 1903 Springfield - looks like a milled buttplate (new orig). Super rare! Collector’s dream ..............................................................$35.00 SPF309 Early ‘03 bolt stop, new orig. G.I. ..........$16.00SPF028 Ejector ................................................... $5.00 SPF029 Ejector Pin ............................................. $2.00 SPF025 Extractor ..............................................$14.95 SPF027 Extractor Collar ....................................$10.00 SPF026 Extractor w/ Hole .................................$16.50 SPF033 Floorplate (milled) 1903 ........................$14.95 SPF034 Floorplate Catch Assembly ..................... $8.75 SPF031 Follower (milled) 1903 ........................... $7.00 SPF030 Follower (stamped) 1903A3 ..................$10.00 SPF032 Follower Spring ...................................... $4.00 SPF036 Front Sight Base Pin .............................. $1.50 SPF035 Front Sight Blade 1903 .......................... $6.00SPF333 Front sight blade 1903A3 ....................... $5.00SPF044 Front Sight Cover .................................$12.95 SPF093 Front Sight Key 1903A3 ........................ $2.25 SPF037 Front Sight Pin ....................................... $1.50 SPF039 Front Sight Screw 1903 ......................... $2.75 SPF038 Front Sight w/Stud 1903 ...................... $9.95 HNGD01 Handguard 1903 (new G.I.) ..................$14.95HNGD37 Handguard 1903 used cracked repairable ...................................................... 10/$39.95

SPF084 Handguard Clips (Two Packs) ................. $3.85 SPF043 Handguard Plastic (New) 1903A3 .........$15.00 SPF347 Lower band assy w/swivel, used orig Remington 1903 ...................................$47.50SPF348 Lower band screw, new 1903 .................. $1.95SPF349 Lower band screw, new 1903A3.............. $1.95SPF046 Mainspring ............................................. $4.00 SPF339 1903 MKI Orig Sear & Trigger Assembly (for Pederson Device) ............................... $125.00OIL035 Oiler, late plastic WWII, new .................$13.95OIL015 Oil and Thong Set (Metal) .....................$35.00OIL016 Oil and Thong Set (Plastic) Used .............................................................. $8.50SPF094 1903 rear sight assy with windage screw without barrel ring ............................................$39.95 SPF143 1903 rear sight windage screw .............$12.00SPF273 Rear sight band 1903 (Orig) ..................$45.00 SPF370 1903A3 Rear sight, perfect repro ..........$36.50SPF371 1903 Rear sight complete assembly w/base & windage screw (barrel ring not included) ............................................................$49.95 SPF294 1903A3 Rear sight G.I. used .................$40.00SPF065 1903A3 rear sight in wrap, Original G.I. new ............................................................$50.00SPF049 Springfield Ring, Handguard to Receiver 1903A3 .................................................. $6.00 SPF053 Safety Lock ............................................ $8.00 SPF054 Safety Low Scope Type .........................$16.50 SPF086 Screw Buttplate Large ............................ $2.50 SPF085 Screw Buttplate Small ............................ $1.75 SPF092 Screw Stacking Swivel 1903 ................... $2.00 SPF056 Screw Trigger Guard Front ..................... $3.00 SPF057 Screw Trigger Guard Rear ...................... $3.00 SPF074 Screwdriver Three Blade ......................... $9.95 SPF055 Sear ....................................................... $7.50 SPF072 Sear Pin ................................................. $2.00 SPF062 Sear Spring ............................................ $2.00

SPF266 Set of G.I. Milled Trigger Guard, Floorplate, Floorplate Catch Assy ...........................$99.95SLNG067 Sling keeper, ¼” for 1907 sling, orig, new GI ........................................................$5.95 ea, 2 for ....................................................... $9.95SPF013 Sling Swivel for Band (milled) 1903 .............................................................. $7.50 SPF067 Spring Band Retainer (milled) ...............$14.50SPF066 Spring Band Retainer (stamped) ............. $4.00 SPF058 Stacking Swivel and Band (exact reproduc- tion) 1903A3 .......................................$15.00 SPF350 Stacking swivel screw 1903A3 ................ $2.00SPF068 Stacking Swivel Used G.I. (milled)1903 ..................................................................$9.50 SPF366 Stacking swivel and band assembly, 1903A3 G.I. used .....................................................$18.00SPF367 Stacking swivel 1903A3 G.I. new ............ $6.00SPF335 1903A3 stamped replacement rear sight. Perfect for drill rifles .......................................... $5.95 3 for .....................................................$14.95SPF113 Stock cross bolt & nut ............................ $9.65SPF090 Striker.................................................... $7.40 SPF052 Striker Rod ............................................. $6.00 SPF051 Striker Sleeve ......................................... $3.00 SPF076 Trigger Grooved ....................................$13.95 SPF077 Trigger Pin ............................................. $1.50 SPF075 Trigger Plain ........................................... $9.95 SPF368 Trigger guard, 1903A3 used G.I ........... $32.00SPF382 Trigger guard, 1903A3—Reparked ....... $36.00SPF117 Trigger Guard 1903 type, Milled ............................................................$49.95 SPF078 Trigger Guard 1903, Orig GI .................$95.00SPF079 Trigger Guard (stamped) 1903A3 ............................................................$31.50SPF083 Upper Band (stamped) 1903A3 .............$16.00SPF082 Upper Band New (milled) 1903 .............$30.00 SPF081 Upper Band Used (milled) 1903 ............$20.00

M1 CARBINE PARTSCRB090 Banana Clip Pouch .....................$9.95CRB023 Barrel Band 1st Model ............. $14.95CRB036 Barrel Band Retaining Spring ..................................................$3.85CRB025 Barrel Band w/Bayo Lug New, G.I.

Parkerized ............................... $19.95CRB093 Blank Adapter ............................$9.95CRB002 Bolt Assembly & Disassembly Tool ............................................... $22.50CRB096 Brass Deflector ...........................$7.95BRUSH-001 Bronze bore brush 30 cal

............................................ 10/$9.95CRB035 Buttplate (Nickel) ..................... $10.00CRB032 Buttplate (Used) .........................$8.00CRB031 Buttplate Screw ..........................$1.50CRB094 Carrying Case .......................... $17.50CRB028 Demilled Front Reciever M1/M2 ............................................... $12.50CRB067 Ejector........................................$4.00CRB066 Ejector and Spring ......................$5.00CRB068 Ejector Spring ............................$1.50CRB063 Extractor ................................. $12.00CRB065 Extractor Spring .........................$1.25CRB064 Extractor Spring and Plunger ..................................................$3.50CRB069 Firing Pin ................................ $17.50

CRB078 Front Sight Key ..........................$2.75CRB080 Front sight .............................. $12.50CRB079 Front Sight Pin ...........................$1.25CRB082 Gas Piston ............................... $11.50CRB083 Gas Piston Nut ...........................$6.00CRB184 Handguard rivets ...........20 for $5.00CRB044 Hammer .................................. $17.00CRB046 Hammer Pin ...............................$1.50CRB041 Hammer Spring ..........................$2.50CRB042 Hammer Spring Plunger .............$4.75CRB099 M1A1 Carbine Forend .............. $95.00CRB100 M1A1 Pistol Grip Current Production ............................................... $19.95CRB056 Mag Catch ............................... $10.00CRB058 Mag Catch Spring and Plunger ..................................................$3.25CRB057 Mag Catch, late w/mag support ............................................... $10.00CRB135 Mag Spring puttaway New G.I. M1

Carbine 15 rd ............................$2.95 ..........................................3 for $5.95

CRB070 M1 Bolt, stripped ..................... $59.95

CRB072 M1 Bolt, complete .................... $89.95CRB167 M2 Carbine standard walnut Stock ............................................... $44.50CRB062 M2 Trigger Housing ................. $80.00OIL019 Oiler ...........................................$4.95CRB109 Orig G.I. Inland T-3 Carbine scope mounting bar ........................$800.00CRB142 Orig new G.I. M3 sniper scope battery charging rack. Charges 8-10 batteries. New G.I. in crate can ship UPS (136#) ............................................$295.00CRB014 M2 Potbelly stock, used G.I. walnut ............................................... $49.50CRB154 Rear Sight, milled .................... $29.95CRB155 Rear Sight, late stamped .......... $17.50CRB001 Recoil Plate .................................$9.95CRB030 Recoil Plate Nut ..........................$2.75CRB029 Recoil Plate Screw.......................$2.25CRB020 Recoil Spring (Hi-Speed) ..................................................$4.50CRB021 Recoil Spring Guide ..................................................$6.00CRB022 Recoil Spring Housing (Early) ..................................................$22.50

CRB019 Recoil Spring Std ........................$3.75CRB055 Safety (Flip Type) ..................... $10.00CRB059 Safety Spring and Plunger ..................................................$2.95CRB103 Scope Mount ........................... $11.95CRB104 Scope Mount w/Rings ............. $15.95CRB049 Sear ...........................................$9.50CRB050 Sear with hump ....................... $12.00CRB051 Sear Spring ................................$1.50CRB015 Slide M1 .................................. $65.00CRB016 Slide, G.I., late M2 ............................................... $75.00CRB017 Slide Stop ...................................$2.95CRB018 Slide Stop Spring ........................$1.50CRB088 Sling and Oiler Set ............................................... $10.95SLNG006 Sling Khaki (New Reproduction) .................................................... $9.95SLNG005 Sling O.D. (New Reproduction) ..................................................$7.95CRB052 Trigger ..................................... $14.95CRB043 Trigger Housing Pin ....................$2.00CRB048 Trigger Pin ..................................$1.25CRB053 Trigger Spring.............................$3.75CRB004 Trigger Spring Removal Tool ..................................................$4.85CRB038 Selector Spring ...........................$4.00

GARAND PARTSGRD330 Barrel G.I. Orig WWII Dated, poor bore & some rust ......................................................$49.95GRD002 Barrel “Clunker Grade” .........................$20.00 GRD001 Barrel (Used, Fair) .................................$34.95 GRD071 Bolt (Complete) .....................................$89.95 GRD070 Bolt (Stripped Used) ..............................$69.95

BRUSH-001 Bronze bore brush 30 cal ................ 10/$9.95GRD065 Bullet Guide ........................................... $7.50 GRD046 Butt Swivel ............................................. $7.50 GRD042 Buttplate Good to VG, G.I. (Used) ..........$22.50 GRD043 Buttplate Screw Bottom (Long) ................ $2.25 GRD044 Buttplate Screw Upper (Small) ................ $1.50 GRD318 Buttplate w/trap assy G.I. exc to like new .............................................................. $30.00GRD319 Buttplate w/trap assy G.I. fair to poor .............................................................$15.00GRD320 Buttplate w/trap assy G.I. new .............$29.95GRD115 Carrying Case .......................................$14.95 GRD021 Clip Ejector ............................................. $4.95 GRD081 Clip Latch .............................................$24.50 GRD082 Clip Latch Pin ......................................... $2.00 GRD083 Clip Latch Spring .................................... $1.35 GRD214 Danish contract Garand oiler ............................................ $3.70, 3 for $8.95GRD259 Early Rear sight windage knob spring ..... $3.00 GRD076 Ejector .................................................... $3.25 GRD077 Ejector Spring ......................................... $1.50 GRD078 Ejector w/ Spring .................................... $4.95 GRD086 Elevation Pinion (Late Style) ..................$26.50 GRD075 Extractor-current production ................$15.95 GRD310 Extractor G.I. new ............................... $20.00

GRD079 Extractor Spring w/ Plunger ................... $3.45GRD074 Firing Pin ..............................................$15.00GRD186 Flash hider lock bracket G.I. M2 ...........$25.00 GRD111 Flashider T-37 (Pronged) .......................$34.50 GRD062 Follower Arm ........................................$15.00 GRD064 Follower Arm Pin .................................... $2.45 GRD068 follower assy .........................................$19.95GRD061 Follower Rod ........................................... $7.00 GRD066 Follower Slide .......................................$12.00 GRD294 Front handguard with metal G.I. good cond. .............................................................$24.95GRD295 Front handguard w/metal G.I. VG cond. .............................................................$29.95GRD109 Front Sight ...........................................$12.00 GRD110 Front Sight Screw ................................... $1.25 GRD096 Gas Cylinder (Serviceable) .....................$85.00 GRD097 Gas Cylinder (Refinished/Serviceable) .............................................................$99.95GRD100 Gas Cylinder Lock (Used) ......................$20.00 GRD104 Gas Cylinder Lock Screw Late (Used) .............................................................$20.00 GRD102 Gas Cylinder Lock w/Hump (Used) .............................................................$23.00 GRD286 Gage .....................................................$45.00GRD016 Hammer................................................$24.95 GRD080 Hammer Int’l Harvester .........................$40.00 GRD015 Hammer Pin ............................................ $2.00 GRD013 Hammer Spring ...................................... $2.00 GRD012 Hammer Spring Housing .......................$10.95 GRD014 Hammer Spring Plunger .......................... $4.00 GRD041 Handguard Band Rear ........................... $5.00 GRD039 Handguard Ferrule Front ...................... $6.00 GRD034 Handguard w/metal front G.I. special select .............................................................$34.95GRD032 Handguard Rear M1D Used ..................$20.00 GRD033 Handguard Rear New G.I. M1D .............................................................$29.95 GRD040 Handguard Spacer Front ....................... $5.00

See our website for a complete offering of Collector Garand bolts

GRD089 Hooded Rear Sight Aperture National Match .............................................................$39.95 GRD037 Lower Band...........................................$15.00 GRD038 Lower Band Pin ....................................... $1.00 OIL002 Lubriplate pot, G.I. 3 for ......................... $3.95CLN116 M10 cleaning rod handle ........................................ $7.45, 3 for $20.00GRD182 New G.I. stripped Early WWII rear sight pinion .............................................................$55.00 OIL035 Oiler, late plastic WWII, new ..................$13.95OIL015 Oiler, brass & throng set, exc ................$35.00OIL016 Oiler, plastic & throng set, used, exc ............................................................... $8.50GRD056 Op Rod (National Match) ....................$175.00 Note: Above op rods are gaged & checkedGRD060 Op Rod Spring (Used) .............................$5.00 GRD052 Operating rod G.I ..............................$140.00GRD349 Op rod, Original #6 round edge-cut .........................................................$165.00GRD141 Op rod gaged piston, Original unmodified Dash 9 - rod reparked ................................$175.00GRD088 Rear Sight Aperture............................. $11.50 GRD348 Rear Sight Aperture Small Hole (.059) ........................................................... $13.50GRD094 Rear Sight Assembly Late .................. $60.00 GRD084 Rear Sight Base................................... $25.00 GRD085 Rear Sight Base National Match ........................................................... $46.50 GRD093 Rear Sight Cover ....................................$5.00 GRD017 Safety.................................................. $19.95GRD112 Scope Mount M1D ............................. $47.50 GRD011 Sear .......................................................$6.00 GRD114 Front & Rear Sight protective cover with muzzle can ........................................................$5.00 SLNG024 Sling Repro WWI Leather, brass hook ........................................................... $16.95SLNG025 Sling Repro WWII Leather, steel hook ........................................................... $16.95

GRD107 Stacking Swivel (Used) ........................................... $8.00 GRD108 Stacking Swivel Screw, new ........................................... $2.95 5/ ....................................... $11.95GRD028 Garand stock for .308 NATO cal gun, new ...............................................................$59.95 GRD027 Stock Average Used Condition Average No Cracks ................................................ $60.00 GRD048 Stock Ferrule Assembly ....................... $13.50 GRD047 Stock Ferrule Stripped ........................................................... $10.00 GRD049 Stock Ferrule Swivel ...............................$7.50 GRD050 Stock Ferrule Swivel Screw ..............................................................$2.95GRD026 Stock U.S./ G.I. Sniper MID/MIC (Used) .........................................................$145.00 GRD024 Stock U.S./ G.I. Used (Good Condition) .........................................................$110.00 GRD323 Trigger forging, orig G.I. new ..................$4.95GRD009 Trigger & Sear Assembly ..................... $12.00 GRD019 Trigger Guard Milled ........................................................... $25.00 GRD020 Trigger Guard Stamped ........................................................... $16.50 GRD023 Trigger Housing Assembly ........................................................... $99.00 GRD022 Trigger Housing Stripped..................... $40.00GRD152 Trigger Housing, Win. Reparked Stripped .................................................................. $65.00 GRD008 Trigger Pin .............................................$1.50 GRD092 Windage Knob early original ........................................................... $55.00 GRD090 Windage Knob (Late Style) ........................................................... $11.00 GRD212 G.I. winter trigger in orig. pkg ........................................................... $19.95

SPECIAL! JUST IN THE DOORHigh speed P17 or P14 Enfield firing pin spring. Speed up your lock time same as used on our speed lock assembly ....................$4.95 P17082

U.S.M1917 & BRITISH P-14 ENFIELD PARTSAlmost all parts are new G.I.P14003 P14, Bolt Stripped ............................$32.00P14002 P14 Bolt, complete............................$99.95 P14004 P14 Extractor, original ......................$39.95P17082 P14 Firing pin spring .......................... $4.95P14007 P14, Floorplate ................................... $9.00P14009 P14, Follower, Milled .......................... $8.00P14008 P14, Magazine Box ...........................$11.50P14010 P14, Speed Lock ...............................$40.00P14013 P14, Stock and handguards with grenade launcher sight plate—4 only ... $195.00 ea.P14005 P14, Striker (Firing Pin) ....................$20.00P14006 P14, Triggerguard .............................$15.00P17016 Bolt Complete ...................................$75.00P17017 Bolt, stripped ...................................$37.50P17068 Bolt stop assy, 4 parts w/o ejector ....$15.00P17041 Buttplate Assembly ..........................$14.95P17040 Buttplate Screw Large ........................ $3.50P17056 Buttplate Swivel Screw ....................... $4.00P17012 Ejector, original ................................$16.50P17043 Extractor ..........................................$24.50P17034 Front guard screw .............................. $3.50P17036 Floorplate ........................................$10.00P17038 Follower Spring .................................. $5.00P17039 Follower, Milled ................................$12.00P17006 Handguard Ring ...............................$10.00P17082 High speed firing pin spring ................ $4.95P17054 Lower Band Asembly ........................$10.00P17083 Lower Band new, original .................$15.00P17037 Magazine Box ..................................... $9.95P17035 Rear Guard Screw .............................. $3.50P17004 Stacking Swivel .................................. $9.50P17052 Stacking Swivel Screw ........................ $4.00P17018 Striker (Firing Pin) ............................$18.00P17031 Triggerguard ....................................$20.00P17053 Upper Band ........................................ $9.50P17046 Rear handguard walnut new G.I. ......$35.00P17047 Rear handguard walnut used G.I ......$25.00P17062 Rear handguard hardwood, new G.I. $25.00P17063 Rear handguard hardwood, used G.I $20.00P17044 Front handguard walnut new G.I ......$22.00P17045 Front handguard walnut used G.I ....$18.00P17061 Front handguard hardwood, new G.I $17.00P17060 Front handguard hardwood used G.I $15.00See our website for all other P17 & P14 parts

LUGER PUT AWAY OR SHOP KITExtractor, Ejector, Firing pin, Mainspring, Extrac-tor spring, Firing pin spring, Locking bolt spring $104.50 value – Sarco’s Price ............................ $69.95 LGR161 Stash It Now!

LUGER BOARD STOCK ASSEMBLIESAvailable again after 10 years! A delightful reproduction. Got a few only –LGR157 Artillery model stock .............................. $99.95 LGR148 We also have a small quantity of nicely reproduced stock attaching irons (Stock iron could require minor fitting due to variations in Luger frames) ...................................................$49.95

LUGER SPRING KIT All the coil springs in a Luger - mainspring, trig-ger spring, firing pin spring & extractor spring.

$9.95, 3 for $26.75 LGR138

CURRENT REPRO LUGER MAGAZINES ....................................$29.95 RPM108LUGER MAGAZINES w/WOOD BOTTOM .................................... $34.95 RPM138NAVY LUGER MAGAZINES w/WOOD BOTTOM ........................$39.95 RPM162

LUGER DRESS-UP SETGet one of our Luger holsters, a pair of new check-ered wood grips, and a new magazine loading tool. All 3 pieces, a $58.00 value. Only ...............................................$49.95/set LGR082

WOOD LUGER MAGAZINE BOTTOMSNew wood magazine bottoms for Luger pistol magazines. These easy to install wooden bottoms will fix up your Luger with a minimum of work. These bottoms are nice copies of the original WWI style wooden bases used on all of the early Luger pistols. All are unnum-bered and unmarked. Wood bases like these have previously sold for $25.00 or more. Thanks to a special big buy we’ve just completed, we can now offer these wooden mag. bottoms for only $9.95 each LGR044, 5 for ................................$45.00

LUGER LOADING & DISASSEMBLY TOOLReproduction Luger tool with Waffen stamp. .........$8.45 #LGR166 See our website for original Finnish Luger tools!

Page 4: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

SARCO, INC.SARCO, INC.E-mail: [email protected]

MAUSER BROOMHANDLE (C96) PISTOL GRIPSMAUSER BROOMHANDLE (C96) PISTOL GRIPS –

Available Again! Just got in 600 pair. Custom made WOOD grips to match the originals. Complete with escutcheons & grip screws. Immaculate copies in the many variations.

GRP125 C96 Mauser standard fine line early grips - 20 linesGRP126 C96 Mauser standard fine line early grips with Red 9 - 20 linesGRP121 C96 Mauser model 1930 grips - 11 linesGRP122 C96 Mauser model 1930 grips with Red 9 - 11 linesGRP123 Bolo (small grips) Mauser pistol with standard lines - 20 lines GRP124 Bolo (small grips) Mauser pistol with standard lines and Red 9 - 20 lines $29.95 a pair, 3 for $83.95These grips are superb reproductions. Others may sell cheaperbut I guess they know what their stuff is worth.

JAPANESE SLINGSA. TYPE 38 Leather Sling - brass hardware, brown. 1-1/8" wide .............................................................................................................. $17.50 SLNG027B. TYPE 99 Leather Sling - w/steel hardware, brown, 1.5" wide ................... $17.50 SLNG008C. WWII JAPANESE NAVAL SLING FOR ARISAKA & VZ-24 RIFLES ...................................................$14.95 SLNG098 BACK IN!!D. JUST IN! Type 38 & Type 99 Bayonet w/Scabbard. Faithful reproduction .....................................................$49.95 JAP178

E. TYPE 99 MONOPOD - Nice reproduction of the rifle monopod made in steel just like the original. Great way to complete your rifle since most monopods are missing from guns on the market ............................................................................................... $29.95 JAP9902F. KOKURA ARSENAL METAL HAND STAMP - Metal hand stamp for marking wood. Leather items and soft metal, to renew or enhance material in your collection .....................................................................................................................$45.00 STAMP02

G. TYPE 26 JAPANESE REVOLVER HOLSTER Premium quality holster with shoulder strap ........................$45.00 HOL062H. BACK IN!! JAPANESE TYPE 99 DUST COVER ......................$19.95 JAP9903I. JAPANESE TYPE 38 DUST COVER - We’ve got these too! Steel .....................................................................................$19.95 JAP3811J. STRIPPER CLIPS - not original for the Arisaka, but work fine for

storing ammo and loading the gun. 5 pcs. for $9.95 or 10 for ........... $14.95 STC032

JAPANESE ARISAKA CLEANING RODSTYPE 99LONG ROD @29-3/16".........$17.95 CLN044SHORT ROD @23-1/4" .......$14.95 CLN045‘LAST DITCH’ TRANSITIONAL ROD @4-7/8" ............................................$12.00 CLN147

TYPE 38LONG ROD @29-1/4" ......$17.95 JAP3803SHORT ROD @23-1/4" ..... $17.50 CLN148CARBINE @17" .................. $19.95 CLN008

JAPANESE ARISAKA RIFLE PARTS FOR TYPE 38 & 99. SPECIFY WHEN ORDERING1. FIRING PIN SPRING $5.00 JAP9905 2. EXTRACTOR $25.00 JAP3801

JAP. BAYONET FROGWell lmade & marked. Good for Type 99 & 38 bayonets ..................................... $9.95 BAY115

NEW ITEM!

NEW ITEM!

SLNG024 1907 WW I Sling (Brass Hardware) Repro ................. $16.95SLNG025 1907 WW II Sling (Steel Hardware) Repro ................. $16.95SLNG001 AR15/M16 Black Silent Sling ..$3.95SLNG002 AR15/M16 Padded Assault Sling .................................... $19.95SLNG075 Chilean Mauser M1895 Carbine, fair, few only ............................... $14.95BAR008 BAR Sling Repro .................. $25.00SLNG023 Egyptian Maadi AK sling .........$9.95SLNG023 Egyptian Rashid Sling,Carbine $9.95SLNG094 Enfield canvas, Olive Drab canvas ..............................................$6.95SLNG095 Enfield canvas, RAF Blue canvas ....................................$6.95SLNG096 Enfield canvas, Black canvas$6.95SLNG027 Jap Arisaka Sling Type 38 Repro .................................. $17.50SLNG008 Jap Arisaka Sling Type 99, Leather w/steel hardware, brown, 1.5" wide .................. $17.50SLNG098 Japanese Naval, leather ....... $14.95SLNG093 Japanese Pacific WW2 Rubberized Canvas .............. $19.00SLNG012 La Coruna 98/43 Sling (Spanish style) La Corona (Fair-Good) ............................. $14.95SLNG042 Lee Enfield #3 or #4 Sling WWI w/Brass Stamp late production ..............................$7.95SLNG044 Lee Enfield #3 or #4 Sling WWII w/ Cloth Stamp late production ...$7.95SLNG006 M1/M2 Carbine Sling Khaki

(New Reproduction) ................$8.50SLNG005 M1/M2 Carbine Sling O.D. (New Reproduction) ................$4.50SLNG051 M16/m14 early sling, new orig. Colt, black canvas........ $14.95M36032 MAS36 & 36/51 Rifle Sling – Back in stock!...................... $15.95SLNG011 Mauser 98K Sling (WW II style) Repro ............................$12.50SLNG010 Mauser GEW 98 Sling (WW I style) Repro ..................$16.95SLNG058 Spanish Mauser Model 1893 & M1916, Orig. brand new rifle sling ........................................... $12.95SLNG007 Russian SMG Sling PPSH41 ...$9.95SLNG017 SKS Sling Tab, new leather $2.00SLNG041 SKS Sling w/Leather Tabs New Orig ..............................................$6.95STN021 Sten Web Sling. Good cond. Needs cleaning. Few Only$9.95SLNG034 Swedish Mauser Sling ......... $11.95SLNG061 Tokarev rifle, original - Super Rare! ...........$14.95, 3 for $34.95SLNG030 Trapdoor / Krag Sling .......... $24.50SLNG020 UZI Orig sling w/leather loops $9.95SLNG013 Verguiero 1904 Sling (Portugese style) ........................................... $14.95M36032 Original Mas 36 & 36/51 Sling – VG

cond. few only ..................... $14.95SLNG077 Rare original PAM SMG Sling New, few only ...................... $17.50SLNG079 Enfield Pattern 14 leather sling .................................... $12.95SLNG038 WWII Khaki Thompson Sling $18.95

Phones Open: Mon - Fri, 8:30am – 5:00pmShowroom Open:

Monday - Saturday, 10:00am – 5:00pm, Friday til 8:00pm

MILITARY RIFLE SLINGS ORIGINAL & REPRO

Dust Cover ....................................$10.00 AK042Extractor gage (orig.) ....................................$19.95 AK036Blank Adapter ...................................... $3.95 AK013AK47/MAK Speed Loader for AK or MAK90 ............................... $4.00 ea, 2/ .............................................$6.95, 10/ ...............................$29.95 AK004Broken Shell Extractor for 7.62 x 39 Good for SKS & AK ............. $2.99 ea, 4 for ............................$10.00 BSE020AK 3 PRONG FLASH HIDER - M16 pattern. Looks neat on gun$9.95, 3 for.....$27.50 AK033 Not for sale in NJAK47 MAGAZINE LOADER FOR LOADING & UNLOADING - Double thumb depressing levers. Makes the process easier.......$17.99 AK048

C-96 BROOMHANDLE STRIPPER CLIPSWorks with both .30 Mauser and 9mm Luger ammunition. The 8 round is an original military stripper clip. 8rd. C96 Clip….....10 for $10.00, 25 /$20.00, 50/$35.00,100/$50.00 STC033

Refresh your AK 47 with one of our new SPRING KITS containing 8 springs designed to handle the punishment of the internal ac-tion mechanisms $25.00 AK058

GERMAN G-43 MAGAZINEWell-made and tested, steel 10rd. magazine for the G-43 semi-automatic rifle. Meticulously made identical to the original $44.95 G43001

AK HI CAP MAGAZINESAK47 10rd steel, new .$14.99 ea, 3 for ....................$35.97 AK054AK47 30rd composite, new .. $9.95 or ....... buy 2 get one FREE! AK015AK47 30rd Yugoslavian, original exc condition ..................$12.95 or ...................5/$54.95 AK056

G43 MAGAZINES & CANVAS MAG POUCHES

G43001 – Outstanding repro magazine. Complete with German markings ........$44.95G43002 – Repro canvas magazine pouch – holds 2 mags – nicely done ..............................$12.95G43056 – Canvas dual mag pouch with 2 new magazines...........................................$93.95

D1

AK RIFLE PARTS & ACCESSORIES

NEW!! AK SEMI PARTS PACKCorrect parts for build-ing an AK Semi Auto. Counts as 3 compli-ant parts under US Sec.922r. Made in the USA by High Standard .................................. $25.95 AK052

JUST IN! AK RIVET SETSComplete set of the PROPER rivets needed to build an AK..$9.95 AK051

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.250.3961

www.e-sarcoinc.com

JAPANESE ARISAKA PARTS & ACCESSORIES

VZ 58 MAGAZINE30 RD. MAGAZINE IN EXCELLENT CONDITION. ALUMINUM, GRAY $19.95 EA. OR 4 FOR$78.80 VZ5801….JUST IN ……

AK-74 BLANK FIRING

ADAPTER$6.00 AK059

WW2 AMERICAN VOLUNTEER GROUP BLOOD CHITLeather patchUsed by American aircraft ground and flight crews serving with the Flying Tigers. Can be sewn onto jackets etc. ..................................$15.00 MISC430

1911 GENERAL OFFICERS BELT SET

WW2 era senior field grade officer set of leather belt w/ U.S. embossed brass buckle, double magazine pouch, pistol lanyard, and Model 1911 hip holster. Well-made and rug-ged to the task ! Very limited supply .......................................$58.00 HOL060

RHODESIAN CHEST RIG WITH 4 FAL MAGAZINES Amazing how many Ameri-cans, Australians, & Britons amongst others, wore this vest while serving in the Rhodesian Army while fighting communist insurgents on multiple fronts. We can now offer this 4 magazine pouch chest rig with 4 NEW Metric FAL 20 rd magazines. Chest rig with 4 FAL magazines $72.95 MISC398 Also available in an economy set. Chest Rig with 2 FAL Magazines $49.95 MISC399

FAL RIFLE

Found a few like new...

ARGENTINE FAL HANDGUARD SETS Original $89.95 FAL294

A FEW ORIGINAL BELGIAN FAL BARREL GAS BLOCKS $39.95 FAL295

ISRAELI HEAVY BARREL FAL (FALO) WOOD CARRYING HANDLE ASSEMBLY

Haven’t had these for years. These can also be used as a

longer wood handle on a regular FAL. $29.95 FAL279

A LUCKY FIND! Brand new original Belgium Fabrique National – Compos-ite pebble grain stock. $24.50 ea 3 for $59.95 FALB020

NEW ITEM!

GO TO OUR WEB OR E-COMM SITE FOR NEW ORIGINAL KNUCKLE PIVOT BOLTS

FOR FAL PARA FOLDING STOCKS

BRITISH FAL/L1A1 SNIPER CHEEK PADRarely found on the surplus market, this black leather cheek pad is uniquely de-signed to fit the tapered FAL stock and provide comfort and a slight incline for the cheek to rest when using the sniper scope. Available in brown or black. Please specify when ordering .$20.00 FAL288

FAL REAR SLING SWIVEL ASSY.Swivel plate, shim, 2 screws and swivel are ready to assemble on your FAL Metric buttstock. Base is @26mm long by 12mm wide. Strangely it has been difficult to find these for many years, but now we finally have nice clean sets! ..................$9.95 FAL074

FAL TOOLS1. Magazine Loader, (stripper clip guide) PN-1135-1505 2 for .................... $5.75 FAL1672. Broken shell extractor .................$5.95 BSE0133. Chamber cleaning tool ................ $2.95 FAL1714. Buttstock removal tool ..............$14.95 FAL1275. Special 1 of each of the 4 tools above .................................................$32.00 FAL2656. Israeli 5 function combination tool – Israeli marked .....................................$9.95 TOOL038

JUST IN THE DOORBrand new original Israel FAL grenade launcher .............................$19.95, 3 for ........................ $49.95 FAL289California Law forbids sales to residents of Calif.

***NEW...FAL STEEL BUTTPLATE...NEW***Beautiful newly mnfr’d buttplate for Metric FAL buttstocks. Black oxide finish... $9.00 FAL128

ISRAEL GAS PISTONS Found a small lot $24.95 ea. FAL018

NEW ORIGINAL METRIC FAL BUTTSTOCK WITH HARDWAREExcellent condition wood stock with buttplate, front cap, and swivel assy w/screws. Complete and ready to install! Always difficult to find complete stocks! $49.95 FALM078

METRIC FAL BIPODSbrand new original military – FN pattern never before available. $34.95 3 for $94.50 FAL219

Note our new lower price above on FAL gas tubes.

NEW FAL METRIC & L1A1 GAS TUBESMetric FAL gas tube, newWill also work on inch guns .........$14.95 FAL250New original Metric FAL gas tubes $19.95 FAL220New original FN Pattern Chrome Lined FAL Gas Tubes ................$19.95, 3 for $49.95 FAL220Used original Metric FAL gas tubes .$9.95 FAL251L1A1 New gas tube ....................$19.95 L1A1042

ORIGINAL ISRAELI PATTERN FAL HEAVY BARREL BIPODSFound a few only ....................... $65.00 FAL007We have finally obtained some Israeli pattern heavy barrel bipod couplers ................. $64.95 FAL232Combo Special HB Bipod and coupler ................................................$119.95 FAL287Note: Rotation lock not included

FAL MAGAZINE LOADERSOriginal Military.......$4.95, 3 for ............. $9.95 FAL167

ORIGINAL NEW OR LIKE NEW FN PATTERN FAL HEAVY BARREL BIPODS WITH ORIGINAL COUPLER/FLASHIDER

Others get $100-$125 just for the bipod FAL277Our price for both only...........................$94.95These original flashider/couplers have been unavailable for years.Bipod only FAL273 ..................................$65.00 3 for ...................................................$175.00Flashider & coupler only FAL278 .............$39.95Note: The coupler & flashider does not include the rotational lock-we will have these later.

ORIGINAL EXC NEW – ISRAELI FALO HEAVY BARREL BUTTPLATE ASSEMBLYWith shoulder piece - just found a few more! .................................................. $34.50 FAL070

L1A1 PARTS & ACCESSORIESAustralian L2A1 Bipods Good used condition ..........................................$40.00 L1A1001Good to very good L1A1 Pebblegrain Stock ..............................................$24.95 L1A1037Used excellent L1A1 Buttplate ...................................................................$8.00 L1A1020 L1A1 Gas Plug Body - New Parker Hale ...................................................$19.95 L1A1046New Original pebble grain L1A1 pistol grip Good Condition .....................$13.50 L1A1036Original L1A1 Flashider .............................................................................$7.95 L1A1026Gas Tube New .........................................................................................$19.95 L1A1042

Original New Israeli FAL heavy Barrel stock & forend set $39.50 FAL147

FAL METRIC PARTSFAL246 Blank firing adapter Israeli ...... $14.95FALB023 Belgium butt swivel, orig, brand new ............................................$9.95FALM005 Buttplate, new ......................... $14.95FALM073 Carry handle............................ $12.00FALM044 Charge lever assembly ............. $12.00FALM057 Ejector block ............................ $20.00FALM020 Firing pin ................................. $10.00FAL034 FN metric lower stripped w/recoil spring tubes ............................ $59.95FAL243 Gas pistol spring, new ...........................$4.95, 3 for $11.95FALM054 Hinge pin ................................. $10.00FALM067 Hold open device assembly ...... $20.00FALM068 Mag catch &spring ................... $12.00FALB023 New Belgian FAL butt swivel .......$9.95FALB020 New Original Pebblegrain Stock$24.95FAL210 Original Israeli (Marked) FAL Lower (Stripped) .........................$125.00 eaFALM055 Rear sight complete ................. $35.00FALM029 Top cover ................................. $12.00FAL299 Stock swivel assy w/ screws .......$9.95Please go to our websites for virtually all other Metric FAL parts

FAL QUAD RAIL FORENDPrecision high quality Weave/Picatinny quad rail fits perfect-ly on your L1A1 or FAL. Fast and easy to install and the 6061 Aircraft aluminum is protected with a hard Coat anodized finish. Comes with Hex tools ................................................... $59.99 FAL254

PLEASE NOTE: We have moved our individual extensive FAL, L1A1, & FN FAL parts listings to our website. Please check there for these. If you have no

access to the Internet we will be happy to mail you a copy.

FN FAL HANDBOOKHandy book with schematics, stripping, servicing, accessories info, operating, and historical information. 35 pages.$6.00 SKT08

EARLY ISRAELI MODEL A FAL

STRIPPED LOWER RECEIVER

Exc Cond… $99.95 FAL249

U.S. T48 RIFLE MANUAL Reprint of the original U.S. T48 (Ameri-can FAL) rifle. Very difficult to find. 141 pages ..................$24.95 SB138

BRITISH PARKER HALE GLOVE TYPE FRONT SIGHTSTop of the line Parker Hale target sights from their finest target rifle! *Large mounting lock screw *Marked with Parker Hale logo *Anshutz size tube 13/16” *Comes with one reticle insert – ‘like or similar’ to the one shown. This is a retail value alone of $40.! *Originally used on Parker Hale MKII & International Target Rifles. * Comes with Dovetail Base ...........................................................................................$14.95 each or 3 for $39.95 PH005

Sight aperture cards with 10 different reticle outlines are available from Lee Shaver Gunsmith at (417) 682-3330. These are new metal reticle inserts, not cheap plastic!

NEW ITEM!

NEW ITEM!

Page 5: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

F1

MOSIN SUPER KITAll of the goodies in the cleaning kit be-low plus 2 ammo pouches and 10 stripper clips N91056 ............................. $26.50 3 kits for ................................ $72.50

MOSIN DOG COLLAR 91/30 SLINGS We have been out for six months just found a new batch.SLNG018 $12.95

ORIGINAL MOSIN CLEANING KITTakedown tool • Cleaning Jag • Cleaning Rod Handle Set • Muzzle Cleaning Rod Guide • Hold All Pouch • Oiler SPECIAL

$7.50 N91051

MOSIN-NAGANT RIFLE ACCESSORIES

1. RUSSIAN AMMO POUCH 2 pocket synthetic leather, w/belt loops, exc. ................................................ $6.50 N910402. CLEANING ROD HANDLE Handle for cleaning rod issued on every rifle .............$4.95 CLN0863. FINNISH MOSIN MUZZLE COVERS Model

28/30 cover.............................. $9.95 N910314. FINNISH M28/30 new original handguard ..............................................$14.95 N910415. Original Finnish Mosin oiler (few only) ................................................$6.95 N910696. Rare Original 91/30 Sniper Scope Lens Cover.

Few Only ............................... $35.00 N910267. BOYDS COMPOSITE SPORTER STOCKS for the Mosin 91/30 or M91 or the Carbines (M38 & M44) New cond, commercial ONLY ............................................. $44.50 N91053

ORIGINAL MOSIN RIFLE BOLTS These bolts fit all Moisins including Dragoon, Cossak M1891 Rifle, M1907 Carbine 91/30 Rifle, M1938 & M44 Carbines. Also fits Sniper but bolt not bent. Mosin Complete Bolt w/o Extractor...........................$32.50 N91075 Mosin Select Unnumbered Com-plete Bolt w/o Extractor ...........................$39.50 N91077Mosin bolt also fits Finnish models

MOSIN COMPLETE TRIGGER GUARD & MAGAZINE ASSY.

Exc cond. 100% blue $13.95 N91062

MOSIN SNIPER BOLT Available again – perfect reproduction built on an original Mosin bolt. You can find ‘em cheaper but these are super professional quality. Made to the original pattern & costs us a bundle. Un-numbered parts on complete bolts have matching finishN91059 Sniper Bolt, Complete, w/o extractor .............................................................$104.95N91073 Sniper Bolt, Complete Select Unnumbered, w/o extractor ..................$104.95N01060 Combo, Complete Bolt & Scope Mount .............................................................$194.50N91074 Set of Mount & Complete Bolt with New Unnumbered bolt ..................................$199.95Original Mosin 91/30 PU scope mounts w/o base .. ...................................................$95.00 N91055Have a few with the base (no screws) ..........$145.00 N91054

MOSIN RIFLE PARTS M91 & M91/30

* PUT AWAY SOME SPARES *N91004 Firing pin ...............................$14.95N91006 Bolt head ...............................$15.00N91005 Bolt Connector and Guide ........ $8.00N91067 Mag Follower Spring ................ $5.00

Mosin rifle stripper clips in stock again - $2.50 ea., 3 for $5.00

10 for $14.95 STC014

WWII RUSSIAN MOSIN NAGANT FIRING PIN PROTRUSION GAGE AND SCREW-

DRIVER TOOL $7.95 TOOL050

MOSIN EXTRACTORS ARE COMING SOON!

We will have a discounted price for those who bought a bolt(s) without extractors!

www.e-sarcoinc.com

See our website for full list of all models of

Mosin parts & accessories

JUST IN THE DOORORIGINAL SLINGS FOR MOSIN MODEL 38 & MODEL 44 CARBINE We’ve been out for a year ........................... $14.95 ea, 3 for ............$34.95 SLNG060

E1

RUSSIAN MOSIN NAGANT 91 &91/30 GUNNER’S KITSpares to carry you through repairs and maintenance issues when you’re shooting. Original parts include: firing pin, bolt head, trigger guard housing, lower follower carrier spring, follower arm, buttplate, bolt guide bar, screwdriver combo tool, and canvas pouch. $100.00 Value bargain priced! .............................$19.95 eachor 10 sets for ............. $175.00 N91061

NEW ITEM!

MO

SIN

NAG

ANT

RIFL

E

WALTHER P5 PISTOL HOLSTERLong drop style in rugged black leather and used by the West German Police. These are in very good condition and can be used with similar size framed pistols. Very Limited ............... $18.00 HOL137

WALTHER P1/ P38 POLICE HOLSTERWest German Police hip holster w/full flap and spare mag.pouch. Allows belt to pass through the inside of the flap in order to secure to your hip. Original in very good condition. Very limited ...........................$15.95 HOL138

NEW ITEM!NEW

ITEM!

MAUSER PARTS & ACCESSORIES

SEE OUR WEBSITE FOR THE FULL SELECTION OF ‘98 MAUSER PARTSMSR104 Band Retaining Spring, front GEW 98

..........................................................$4.00MSR105 Band Retaining Spring, rear GEW 98 $4.00MSR106 Band Spring (98K) ............................ $7.00MSR096 Barrel KAR88 Orig Used 8x57 171⁄2" small

ring ................................................$50.00MSR304 Barrel, Verguiero 8x57mm 23-3/4” Small Ring, New .......................................$75.00MSR097 Barrel KAR88 Original (hand picked bores) 8

x 57MM 17 1⁄2" small ring ...............$75.00MSR114 Bolt (complete) turndown handle . $125.00MSR115 Bolt (stripped) turndown handle .....$75.00MSR117 Bolt Sleeve (new) ............................$12.00MSR118 Bolt Sleeve (used) ............................. $8.00MSR120 Bolt Stop (stripped)........................... $7.00MSR121 Bolt Stop Assembly ........................$17.50MSR359 Bolt Stop for 1909 Argentine stripped

......................................................$14.95MSR434 Bolt Stop Screw, new ........................ $2.00MSR122 Bolt Stop Spring .............................$12.00MSR404 Bolt stripped, straight handle .........$43.50

MSR123 Bolt, complete straight handle .......$79.95MSR126 Buttplate (flat) .................................. $8.00MSR127 Buttplate Screw ................................ $1.25CLN014 Cleaning Rod 12 1⁄2" M98/43 ......................................................$12.95CLN025 Cleaning Rod 15" GEW 98 ..............$12.50CLN018 Cleaning Rod 15" VZ24/G24(T)

......................................................$13.50CLN013 Cleaning Rod early 10" ...................$12.00CLN049 Cleaning Rod M93 17 1/4" ................$10.00CLN074 Cleaning Rod Stock Nut.................... $5.00MSR135 Cocking Piece ................................... $7.00MSR136 Ejector ............................................. $5.00MSR138 Extractor ........................................$19.95MSR516 Extractor new original ....................$26.50MSR139 Extractor Collar ................................ $8.00TOOL041 Firing pin protrusion gage, 98 Mauser new orig military – for 8mm & 7.62mm Mauser. Also has a firing pin tip diameter gage ......................................................$24.95MSR141 Firing Pin Spring .............................. $3.75MSR514 Firing Pin Yugoslav ’98 Mauser .......$30.00MSR143 Floorplate (used) ............................... $9.00MSR142 Floorplate new orig, unnumbered ...$19.95

MSR146 Follower (milled) ............................... $8.00MSR147 Follower (stamped, WWII) ...............$17.50MSR148 Follower Spring ................................ $4.00MSR151 Front Sight ....................................... $4.00MSR153 Front Sight Hood, 98K ...................... $6.50MSR155 Front Sight Protector VZ24 .............$10.00MSR157 Guard Screw Bushing ...................... $2.00MSR158 Guard Screw Set (commercial) New

........................................................ $6.95MSR158(A) Guard Screw Set (commercial) Used . $5.00MSR372 Guard Screw Set w/Lock Screws (military)

........................................................ $9.75MSR159 Handguard, K98 (beechwood, used, orig)

......................................................$15.00MSR161 Handguard used walnut K98, orig .$18.95HNGD34 Handguard 1908 Brazilian long rifle $19.95 MSR579 Israeli 1 leaf bolt stop spring ............. $9.95MSR162 Low Scope Safety ............................$17.95MSR129 Lower sling swivel, detachable, 98 WWI GEW ........................................................ $8.50MSR193 Parade sling loop swivel, original 98 WWI GEW ................................................ $4.00 MSR595 Polish WZ29 ’98 Mauser Floorplate RARE ......................................................$25.00

MSR415 Combination of MSR129 & MSR193 . $9.95MSR595 Rare WZ29 Polish 98 Mauser Floorplate ......................................................$34.95MSR175 Rear sight & handguard screw VZ24 ........................................................ $4.00MSR180 Rear Sight Sleeve ...........................$15.00MSR185 Safety ............................................... $4.25MSR150 Front Guard Screw (military) ........................................................ $4.00MSR149 Screw, Front (commercial) New ........................................................$3.50MSR373 Screw, Guard Lock Set (military) New ........................................................$3.50SLNG010 Sling GEW 98 (WWI Style) ..................................................... $16.95MSR193 Sling Loop for GEW Parade Sling position ........................................................$4.00MSR196 Stock Set German Wartime Laminated (used) w/

handguard, hardware, & cup buttplate ...$N/ASTC013 Stripper Clips (8mm, 5 rd) ................$1.45MSR208 Trigger Guard Assy, milled military ..................................................... $34.95MSR206 Trigger Guard Assy, stripped ..................................................... $23.95

K98 MAUSER COMBO TOOL FOR TAKING DOWN THE FLOORPLATE & OILING AND CLEANING THE CHAMBERThese are original and in excellent condi-tion. Hard to find! ............$9.95 MSR550

NEW ’98 MAUSER SPORTER BARRELS

We got a deal on a few 100 assorted caliber Mauser barrels. 24" Standard taper sporter barrels 5/8" at muzzle. Made by the renowned Citadel barrel producer. Calibers available:MSR351 .300 Win Mag ............................ $79.95MSR611 7mm Rem mag .......................... $79.95Note: These barrels were made special with tight threads for accuracy. They screw on fine with bar-rel installation equipment.

Check our website for a fabulous as-sortment of ’98 Mauser trigger guards over 35 variations – we had a big sort! Have over 30 varieties of Bolts, too!!

98 MAUSER COMMERCIAL GUARD SCREW SETS

Commercial set, new ..........$6.95 MSR158

K98 RIFLE STOCK DISC Usually inserted in the right side of Mauser stocks in the 1930s and in Garrison rifles of the Home Guard through the early war years. Would ID mfg., date, serial # ....................................................$4.95 MSR596

M98 MAUSER BOLTS Complete bolt assembly with firing pin, extraction, bolts sleeve, etc. Standard length ’98 bolt, fits German 98K, Czech VZ24, Argentine ’09, etc. Gew 98 style bolts. Good, original condition. .....................................................$79.95 ea. MSR123

98 MAUSER TACK DRIVER HEAVY BARRELS

We took some of our fabulous Swedish 8mm heavy barrels blanks – had them threaded for 98 Mauser actions. These have a nice heavy profile and are 1 3/16" at chamber and 15/16" at muzzle. Length is 22 3/8". Our barrel maker commented “I would be proud if I made a barrel of this fine quality” – These are fully chambered but of course still need to be headspaced by a competent gunsmith ................ $79.95 MSR553

PLEASE NOTE:These barrels have a slightly deep chamber for a reason. If you have a shallow chamber, you will need to use a chambering reamer to adjust head-space. With this method you can adjust head space by turning back the shoulder and breech a bit to accommodate the headspace dimension. This also solves any variance from the chamber-ing reamers pilot and the throat dimension in the reamer. No need to buy a chambering reamer.

MISC. 98 MAUSER ITEMS1. Rare brass Turkish Mauser cleaning

funnel – locks on to muzzle. To pour solvent down the bore – for Turk M1890 & M1893 ............................. $14.95 MSR3002. Original Argentine SOM sniper scope w/base & leather case ..................................$3495.003. Rare M98/43 La Coruna Spanish muzzle cover ............................$9.95 MSR2174. M98/43 Handguards, replace your cracked one .......................... $16.50 MSR2165. VZ24 Mauser new original stock disc ... $4.95 3 for .....................................$12.50 MSR5236. Original Israeli K98 grenade launcher, like new .............................................$49.95 MSR5757. Orig Yugoslav, 98 & M48 etc Mauser oiler ................................................$4.95 MSR5768. Rare original 1904 Portuguese Verguiero front sight cover, new .......................$9.95 MSR591

BACK AGAIN!! NEW PRODUCTION ‘98 MAUSER FIRING PINS We just produced these out of the best 4140 steel - The good news is that we redesigned the cocking piece knotches to fit multiple manufacturing variations of the cocking piece. For years we have suffered pins and cocking pieces that wont fit together and hours and hours of sorting for fit. Problem solved + a new 4140 pin . ..............................................................................................................$22.50 MSR431

ORIGINAL NEW COMMERCIAL FN MADE (FROM THE 60’S)

Note: These are original FN milled from BAR stock – current offerings are castings.Finally available again, hooded bolt sleeve for use with trigger mounted safety mechanism. These are the type used on all of the high quality Mauser sporters. Our sleeves are original F.N./Belgium manufacture, left over from their production of Mauser Sporters several decades ago. We found a small cache of these desirable hooded bolt sleeves at the FN plant and bought them all. All are beautiful polished steel, new condition $34.95 each MSR119

MAUSER 98K WWII STYLE SLINGK98 GERMAN STYLE

MAUSER SLING with German WWII markings - New mfr.......................$14.95

3 for ................................................... $39.95, 10 for.................................. $120.00 SLNG011

NICE REPRO OF K98 MAUSER SLING BUCKLE Finally got these in stock

$4.95 ea, 3 for $11.95 SLNG081

MAUSER “20” ROUND “TRENCH” MAGAZINEDuring the trench warfare of WWI, the Germans developed these magazines to increase the fire-power of their 98 Mausers. Easily installed in any GEW. 98 rifle by merely removing the floor plate from the rifle’s trigger guard, and replacing it with the trench magazine. Original trench magazines are very rare and valuable. We now have this quality reproduction identical to the originals right down to the proof marks! Will also work in 98K, Kar 98a, Vz 24, and most M98 style Mauser rifles. Blued steel, complete with follower, spring and follower retainer with chain. Available Again

$74.95 MSR167

MAUSER RIFLE BARRELS VARIOUS MODELS1. Kar 88, 8x57, original used, with good bores. 171⁄2"$50.00 MSR096 with hand pick bores ...........................................................................$75.002. K98 Mauser barrel – rough bore .............................................$24.95 MSR424 3. Rare Argentine M1909 Engineers Carbine barrel – bores vary .....................................................$49.95 MSR512

’98 MAUSER SPORTER RIFLE PARTS

Steel hinged trigger guard $69.95 MSR326

Single stage trigger & sear assy. Note this single stage trigger &

sear takes the creep out of your trigger pull. $6.50

ea. MSR205, 3 for $18.95

Low scope safety – for scope mounting on 98 Mauser scoped Sporter. Fits & works

on standard military bolt sleeve $17.75 MSR162

NEW ARRIVALS! RARE ’98 CONTRACT MAUSER SLINGS

Mauser Portuguese 1904, Verguiero ............................................$14.95 SLNG013Brazilian M1908 detachable Sling Swivel ................................................ $8.50 MSR324Proper parade sling loop for Brazilian 1908 to go with the butt swivel above ............. $4.00 MSR193Set of above MSR324 & MSR193, only ................................................ $9.95 MSR415Orig brand new Spanish Mauser Model 1893 & M1916 rifle sling ......$12.95 SLNG058

A GREAT BUY ON SELECT NEW MAUSER ‘98 SPORTER BARRELS

FROM A MAKER OF HIGH END MAUSER SPORTING RIFLES (HE CHANGED PROD-UCT LINES SO WE GOT THE BARRELS)

These barrels are custom produced from the highest quality Swedish steel. Nothing but the absolute best. Do to our fabulous buy we can pass the savings on to you. Fits all ‘98 Mauser actions. Barrels are shallow chambered so they can be head spaced to your action.Compare price at $235.00 to $255.00Barrel dimensions: Length 217⁄8”Muzzle diameter 5/8”shoulder diameter 11⁄8”Special prices cal .30-06 $64.95, 3 for $178.95 MSR350

MAUSER RIFLE CLEANING RODS1. 98K 12.5 inch rod, for most 98K and G-43 rifles ...............$12.95 ea. CLN0142. 98 K 10 inch, for early 98K ....$12.00 CLN0133. G33/40 Rod, Special length rod used only on

the Czech Mountain carbines made by the Ger-mans as the G33/40 .............$14.95 CLN016

4. VZ24 Rod, Correct length and diameter rod for the Czech VZ24 rifles. Also correct for G24 (T) rifle. ......................................$13.50 CLN018

5. Chamber cleaning tool, wood ....$3.95 CLN0846. 121⁄2” rod for M98/43 Spanish$12.50 CLN0197. Cleaning rod M93 171/4" ..........$10.00 CLN0498. Cleaning rod – Turkish model 38 Mauser & M98 ...................................$11.95 CLN1279. M95 Mauser Chilean rifle .......$13.50 CLN12910. Argentine M91 & M1909 Mauser ...$10.00 CLN02411. 1916 Spanish short rifle .........$12.50 CLN13612. Chilean M1935 short rifle .......$25.00 CLN13113. Swedish M1896 rifle ................. $8.00 CLN02014. Swedish M1938 carbine .........$12.50 CLN02115. Brazilian M1908 Mauser ........$12.50 CLN02616. GEW 98 Mauser WWI .............$12.50 CLN025

‘98K MAUSER ACCESSORY KITCleaning rod, Our famous K98 Repro sling, front sight hood. Value $55.00

Sarco Special $24.95 MSR365

98 MAUSER GUARD SCREW SETMSR372 – Military set w/lock screws used

.........................................$9.75MSR373 – Military guard lock screw set

new ...................................$3.50

’98 MAUSER FRONT SIGHT COVERSBack Again!New condition $6.50, 3 for $17.95 MSR153

98 MAUSER 8x57MM STRIPPER CLIPSSteel 5rd ........................ $2.00 STC013Original brass few only .. $3.00 STC028

MAUSER STOCK MILITARY ISSUE1. Israeli K98 handguard only .... $19.95 MSR403 2. 1908 Brazilian long rifle stock good cond. .............................................. $49.95 MSR3663. A – Select (very few only) 1908 Brazilian long rifle stock ..................... $85.00 MSR366A 4. 1908 Brazilian long rifle stock with hand- guard, good cond ................... $65.00 MSR3755. 1908 Brazilian long rifle stock with hanguard, Select ................................ $100.00 MSR375A6. Steyer M1912 stock w/buttplate & bayo lug .............................................. $39.95 MSR5487. Steyer 1912 Rifle Stock, good condition ............................... $49.95 MSR549

Use above 1908 Mauser stocks to rework the 1908’s with cracked stocks currently on the market.

’98 MAUSER MILLED MILITARY TRIGGER GUARD ASSEMBLIES

Complete guard with catch floor plate, follower & spring ..................................................................$34.95 MSR208Stripped trigger guard assy ........................$23.95 MSR206

(see this page for guard screw sets)

PROPER 8x57mm BORE BRUSHESBronze brush – 5 for .............................................................................$6.95 CLN124Stainless steel brush for cleaning those tough military bores 5 for ..........$8.95 CLN121

’98 MAUSER ENSEMBLEWWII sling 2 ammo pouchesCleaning rod Late oil bottleFront sight cover Proper 8mm brush$66.00 value – for only .............. $44.50 MSR590

GERMAN K98 STOCKS! JUST FOUND A HANDFUL!Original stocks in good condi-tion (no junk)! Really hard to find on the market now, and they normally command prices of $200-300 when you can find one. MSR195 German stocks with cupped buttplates - with late style hole in the cupped buttplate............................................................. $175.00 Get one while you can! They will not last long! For Special Selection of what we have, add...............................$10.00GETTING LOW!! ALMOST GONE!! ACT SOON!!

Page 6: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

F1SARCO, INC.SARCO, INC.E-mail: [email protected]

ORIGINAL MOSIN91/30 BAYONET

$19.95 BAY019MOSIN NAGANT M91/30 &EARLY CARBINE BAYONETMosin short 11.5 inch

$44.95 BAY261

MOSIN NAGANT MODEL /44/ CARBINE BAYONET2 variations available in limited supplies:A. Mosin 44 Bayonet w/ Single Ear connection. 1945 & earlier ......................... $28.95 BAY262B. Mosin 44 Bayonet w/ Double Ear connection ............................................... $26.95 BAY263

M8A1 BAYONET SCABBARDSM8A1 Scabbards to fit the following bayonets!M5 & M5A1 Garand, M3 Trench Knife, M4 for M1 Carbine,M6 for M14 Rifle, M7 for M16New Military Contract ............................................................................................. $17.95 ea BAY083Excellent used military contract .................................................................................... $14.95 BAY191We have a small quantity of U.S. G.I. M8A1 scabbards. VG condition ............................ $19.95 BAY040 (Call Cholly for bulk purchases on M8A1 scabbard BAY083)Original G.I. new M8A1 scabbard. Just found a few in the warehouse from the old days. Has original USGI scabbard body ......................................................$24.95, 10 for $199.50 BAY041

BEAUTIFUL CURRENT PRODUCTION SCABBARDS FOR YOUR CMP AND COLLECTOR BAYONETSM3 scabbard for 16" M1942 bayonet ........$12.95, 3 for .............................................$35.95 BAY17610" Garand scabbard ..................................................$11.95 BAY175

50 Hilton Street, Easton PA 18042

610.250.3960 Fax: 610.250.3961

M1 GARAND BAYONETSSarco has a limited quantity of M1 Garand Bayonets in both original, and new/late production versions with blade lengths from 6.5 to @ 16 inches, sold with, and without scabbards. A. Original 10" Model 1943, Unmodified Bayonet w/ late production US scabbard ............................................................................... $64.95 BAY193C. Original 10" Model M1905E1, Modified Spear Point blade w/ late production US scabbard ............................................................................... $64.95 BAY194DEAL: Buy 1 each of the above 2 bayonets w/scabbards .............................................................................$120.00 BAY268 D. New Made 16” Model 1943 bayonet & scabbard ...................................................................... $29.95 BAY182E. New Made 10” Model 1943 bayonet & scabbard ..................$24.95 BAY183F. Original M5A1 bayonet w/ M8A1 scabbard, GI .............................................................................................. $36.50 BAY189ALSO….We have RARE M5A1 Garand bayonets marked KM5A1 .............................................................................................. $59.95 BAY020G. Original Korean Army version of the 1943/ 1905 blade shortened to their requirement of between 6.5-7" length. These were imported from the military by Arlington Ordnance years ago, and we have found a handful remaining in the warehouse. Complete with original Korean short scabbard ........... $49.95 BAY240Also have a few original Korean scabbards by themselves...... $14.95 ea. BAY135

M16 BAYONETSSarco is pleased to offer a selection of original USGI, foreign military contract, and new mfg bayonets.A. U.A.E. (United Arab Emirates) M16 bayonet with black synthetic scabbard. UAE emblem on handle and also on scabbard. New/unused ............................................. $34.95 BAY237B. USGI M7 Bayonet in very good condition with M8A1 Scabbard ................................................................................................ $29.95 BAY001 *Also have a small number of the M7 bayonet in Excellent condition with ‘like new’ scabbard ............................................ $32.95 BAY003C. Econo M7 bayonet w/ scabbard – these are not mil spec, but fit and look like the M7 bayonet and scabbard. New condition .................... $19.95 BAY229D. M9 type bayonet w/ scabbard – A terrific rugged alternative to the very expensive GI issue M9. Features a 7 Inch stainless steel blade sharpened to a razors edge with Sawback edging on the opposite side. Also has a sharpening stone on the back and wire cutter connection, and spare pouch on the scabbard. Also includes the quick release features on the belt fastener and blade release ......................................................... $39.95 BAY219

SPECIAL RARE COLLECTOR M1 GARAND BAYONETS. FEW ONLY AVAILABLE. Turkish contract Korean War .......................................................$70.00 BAY226Greek contract complete with original Greek Scabbard ................$74.95 BAY238M5A1 Garand Bayonet with aluminum grips-with original m8A1 scabbard ...........................................................................................$75.00 BAY200Original Norwegian Kongsberg M1 Garand bayonet 1954 issue (only 12 available) ........................................................................................ $150.00 BAY239(SEE OUR WEBSITE FOR FURTHER DESCRIPTIONS AND INFORMATION)

COLLECTORS BAYONETSVARIOUS COLLECTORS BAYONETS & ACCESSORIES

BAY031 SKS spike bayonet, stripped .............................................................................................$3.95BAY125 Brown Bess Reproduction bayonet scabbard ....................................................................$9.95BAY162 Nice repro of leather scabbard for the Trapdoor Springfield trowel bayonet – complete, few only ................................................................................................................................. $24.95ECK002 Swedish G3 Bayonet (3 crowns) with scabbard, new original – Few only ........................ $65.00BAY043 Perfect reproduction leather scabbard for 1941 Johnson rifle bayonet. Almost sold out – can’t tell from original ........................................................................................................... $29.95BAY217 Rare find – found 15 only – M5 Garand bayonet with aluminum grips ........................... $50.00BAY172 New G.I. M16 bayonet in original, G.I. packaging ........................................................... $34.50

1905 BAYONET PROJECTSet of original and new made parts for assem-bling a 1905 bayonet. Years ago we had 2,000 blades manufactured and rewelded onto handles with great success, allowing us to sell 1905 bayonets again. Now we have a very limited group of these complete sets of parts remaining. The handles and hilts are from original U.S. bayo-nets that were demilled by the U.S. govt. Grips and internal handle parts and blade are new mfg. Set of parts: ...................$29.95 BAY232*Add a scabbard for .......................$9.95 ea, or 10 for ...............................$89.95 BAY233

WW2 1938 CARCANO FOLDING BAYONETAs used by paratroops and specialized infantry. Faithfully manufactured from an original. With scabbard. Great price for a rare bayonet .......................$89.95 BAY245

WW2 BERETTA 38 FOLDING BAYONETFor use with M38 subma-chine gun. Faithfully made from an original.With scabbard. Very hard to find ........$99.95 BAY24

SWEDISH MAUSER BAYONET M96/M38Original bayonet with-out scabbard. ...........................................$29.95 BAY01

FAL TUBULAR BAYONETOriginal early FAL bayonet for thin barrel, short flash hider FALs and STG-58.Bayonet w/ scab-bard canvas belt connection $19.95 BAY016Bayonet w/ scabbard w/o belt connection. $18.95 BAY171Bayonet w/o scabbard .....................................$9.95 BAY156

WW1 GERMAN TRENCH KNIFE w/ ‘BOOT’ SCABBARDLate manufacture steel blade & scabbard based on the original trench knife. Sleek & utilitarian for use on belt or Boot!. Very nice low profile 6" blade. $39.95 BAY248

ENFIELD #5 JUNGLE ENFIELD BAYONETAccurate new made bayonet with steel scabbard for use on the Jungle Enfield & Sterling SMG ................................$39.90 BAY145

ENFIELD #4 SPIKE BAYONETOriginal bayonet for the Enfield #4MK1 rifle and Sten MK5 SMG. Complete with scabbard. .....................$12.00 BAY106

ENFIELD #9 BAYONETOriginal bayonet blade with blood groove used on the #4Mk1 rifle and Sten MK5 SMG. Complete with scabbard. .....................................$29.95 BAY021

SKS SPIKE BAYONET, COMPLETEOriginal and ready to install… $9.95 SKS03

BRITISH SPIKE BAYONET SCABBARDNewly manufactured steel scabbard. Perfect replacement! ...... $9.00 BAY235

SIG 530/ 540/ 542 RIFLE BAYONETSocket style bayo-net as used on various SIG rifles and used by the French military in the 80s. Comes with scabbard ........ $75.00 BAY130

U.S. M6 LEATHER SCABBARDWell crafted scabbard w/ leg tie and metal reinforcements. WW2 design intended for use with the M3 fighting knife, but works with other similar sized blades like standard M14 & M16 bayonets................................................................. $14.95 BAY184

BRITISH 1907 LEATHER SCABBARDOriginal scabbard for #1 MK3 blade bayonets (@18" length) $24.95 BAY108

BAYONET FROGS We have 4 leather historical bayonet Frogs for wearing on waist belts.A. SWEDISH MAUSER - original good condition ....... $5.95 MSR258B. JAPANESE ARISAKA - late mfg, new, for Type 38 & Type 99 bayonets ...............................................................$9.95 BAY115C. YUGOSLAVIAN MAUSER - original good condition .........................................................................................................$7.50 BAY054D. GERMAN K98 MAUSER - late mfg, new, fits WWII K98 bayonets ........ $9.95 MSR111E. SOUTH AMERICAN FROG WITH U.S. BRASS BELT HOOKS-Compact 4-inch leather belt frog for bayonet & scabbard. Fits scabbards similar to Enfield 1907, K98 etc. Original VG condition military surplus .............................................................................................$12.95 BAY258

1907 ENFIELD QUILLON BAYONET Late manufactured steel blade and leather scabbard as used in WWI and even WW2 in North Africa. Differs from the standard 1907 by way of the quil-lon connection to the muzzle ring. Classic old English style and looks great on the rifle! ..................................................................... $58.95 BAY244

Go to our website for a full listing

JUST IN! Type 38 & Type 99 Bayonet w/Scabbard. Faithful reproduction. $49.95 JAP178 This model has the desirable quillion

ALLIED D-DAY FIGHTING KNIFEClever designs for fighting knives were applied and issued to various units prior to D-day as units waited for the invasion. One inspired design during this period was made using the French cruciform Lebel blade set within a knurled steel handle. Far sleeker than the British Sykes, U.S. V42 stilettos, and M3 knives, this @7 inch blade was very low profile and quick to penetrate any clothing or tissue which made it ideal for sentry removal. Also, where a grinding wheel was available, each of the 4 edges of the cruciform blade could be sharpened to assist with slashing in hand to hand combat. A fantastic self-defense weapon! New mfg, knife with scabbard .....................................$27.95 BAY256

WW2 ITALIAN M91 FIGHTING KNIFESay what you will about the Italian Army in WW2…. But one thing is true, and that is the quality of their fighting instruments like the M91 knife were among the finest battle weapons. Our late production knife with scabbard is a terrific combat knife sporting an 8 inch steel blade, hard-wood handle and scabbard with locking belt keeper. It has very good balance compared to most fighting knives that are usually way too heavy on the grip end. U.S. GIs loved to use them for knife throwing. Originals will cost you $400-800. Sarco’s price buster special .....................................$26.95 BAY255

SPRINGFIELD WOOD BAYONET GRIPSNew production, new condition wood grips for the M 1905 pattern bayonet as used on the M1903 Springfield rifle. Fix up or up-grade your old bayonets with these beau-tiful new grips. Heavily grooved for better holding, just like some originals we found and sent to the wood workers to copy. Screw and nut included. Ready to fit on to your blade ..........................................$9.95 per set or 3 sets for ...................$24.95 GRP143

CMP Garand M1 M1943 & M1 10" blade bayonet repair kits, grips & screw, lever, latch button & spring. All the missing parts. These are nice repos – small quantity only. We will use most for our own bayonets. May require minor fitting – we fit ‘em! ...................................... $24.95 BAY199

BRITISH STEN MKII SMG BAYONETRarely seen today as most were destroyed, this bayonet fit over the barrel and provided the same last ditch protection to the shooter as the spike bayonet for the Lee Enfield. Simple to install, effective in use, and not labor intensive to produce like a blade bayonet, New Mfr...$34.95 BAY246

U.S. M3 FIGHTING KNIFEOne of the finest WW2 fighting knives and truly, ‘no frills’ with a utilitarian fighting blade and stepped leather handle that provides a superior grip, even by today’s standards. Knife w/ leather M6 scabbard with markings................................................................$29.95 BAY180

K98 BAYONET SCABBARDSteel repro-duction scab-bard for the WW2 German K98 Mauser bayonet. Excellent German style scabbard ......$12.95 BAY223

SPANISH FR8 MAUSER BAYONETFits FR8 & CETME rifles. Comes with scabbard ...........$24.95 BAY128

MOSIN NAGANT M91/30 & EARLY CARBINE BAYONETMosin Short 11.5 inch bayonet as used by Finnish Cavalry and Russian Police on early Carbines without side folding bayonets. Also fits standard length Mosin 91/30 rifles. These do not have the Finnish SA mark so we expect they were strictly of Russian origin as brought in by Interarms in the 1960s. Lost for decades in the warehouse, there are very few available .............................................................................. $44.95 BAY261

MOSIN NAGANT MODEL ‘44’ CARBINE BAYONET2 variations available in limited supplies:A. Mosin 44 Bayonet w/ Single Ear connection. 1945 & earlier ................................................................................... $28.95 BAY262B. Mosin 44 Bayonet w/ Double Ear connection ................................................................................... $26.95 BAY263

BAYONET GRIPS & SCREWSBAY164 Original Yugo ’98 Mauser bayonet grip sets $5.95, 3 for $14.95LE3083 Original grips for Enfield #1MKIII (1907) bayonet .................$9.95BAY163 Original new G.I. grip screws for 1903 Springfield & WWII Garand bayonet ......................................................$3.95 ea., 4 for $10.00BAY179 Original new grip set for the British #7 bayonet for the #4 Enfield.....................................................................................$12.95BAY215 New original G.I. left grip for the M1905 Springfield bayo - Special for that special bayonet ...........................................................$45.00

www.e-sarcoinc.com

ITEM D - 16"$29.95 BAY182

F2

Page 7: SPANISH CETME MODEL (C) RIFLE PARTS SET · PDF fileThe kit does not come with a barrel or receiver. ... SPANISH CETME MODEL (C) RIFLE PARTS SET. ... BRITISH STEN MK-5 PARTS SET

SARCO, INC.SARCO, INC.E-mail: [email protected]

50 Hilton Street, Easton PA 18042610.250.3960 Fax: 610.250.3961

U.S. 1912 CAVALRY HOLSTERSThe 1912 Cavalry holster is a favorite because it hangs lower from the belt than a 1916 Hip holster. It puts the pistol more in line with your hand and when mounted or in a vehicle, it follows the taper of your leg. We have both RIGHT and LEFT hand holsters in stock in several varieties:1. STANDARD 1912 CAVALRY HOLSTER - Brown Buffalo leather holster with brass hardware and 18" leg strap. RIGHT HAND ONLY. Ruggedly made for hard use! .............................................................$22.95 HOL0402. PREMIUM RUSSET BROWN 1912 CAVALRY HOLSTER Made by another Saddlery known for making precision WWII Russet color holsters. The finish and embossing are excellent. LEFT HAND ONLY .............................................................$35.00 HOL070

MODEL 1911 .45 HIP HOLSTERSStandard tough Buffalo leather hip holster with U.S. embossed flap, leg strap and belt hooks. These are right hand draw holsters unless otherwise marked:BROWN 1911 HOLSTER - rugged 1916 leather holster as used in WWI & II. This has been a customer favorite because of price & quality .................................................... $17.50 ea, 3 for........................................$47.50 C45112

WWI STANDARD LUGER 4" CANVAS HOLSTERCarefully reproduced in both khaki (African Service), and green (European Army Service). This is a flap holster with two belt loops on back. Specify color of Khaki or Green when ordering:HOL054 GREEN HOLSTER ....................$29.00HOL055 KHAKI HOLSTER ......................$29.00

WWI NAVAL LUGER 5” CANVAS HOLSTER First World War rendition of the Canvas Luger holster for the Navy Luger with 5" barrel. Available in Khaki (African Service) or Green (Army Service). Specify color when ordering:HOL072 GREEN HOLSTER .............$29.00HOL073 KHAKI HOLSTER ...............$29.00

LUGER ARTILLERY STOCK HOLSTER RIG Exact reproduction of the Luger Artillery model leather holster rig used by German troops. Our Artil-lery holster rig includes the holster itself, cleaning rod, carrying strap, leather pieces to connect to a stock board, and 2 pocket magazine pouch which goes on the carry strap. We offer this set with a wood stock and without a wood stock:1. Wood Stock with Leather Arty. Holster Rig .............................................. $129.95 LGR0882. Leather Arty. Holster Rig without stock .................................................$34.95 LGR086

GERMAN LUGER SNAIL DRUM CARRIERAlways difficult to find, Sarco has repro-duced a fine heavy duty leather snail drum carrier based on the WWI design. Well-crafted to last a lifetime ......................... $32.00 HOL061

LEATHER NAVAL LUGER HOLSTERBlack leather holster for the Naval 5 inch barrel Luger. Complete with shoulder strap and cleaning rod pouch .................$24.95 LGR079

LUGER HARDSHELL HOLSTERBlack leather holster most commonly worn by German officers in WWII. Our holster comes complete with period mark-ings$24.95 each, 3 for ................... $69.95 LGR078

CAVALRY “UHLAN” LUGER HOLSTERLancers carried these in WWI, fastened to the right hip, but for left hand draw, so that their right hand could hold lance or sword. Ruggedly made with shoulder strap. Originals are very scarce! .......................$24.95 HOL039

P35 RADOM PISTOL HOLSTER Adopted by Germany for inte-gration into its forces, the P35 was an exceptional pistol. Our holster reflects the one as issued to the German military ...............................$24.95or 3 for ......$69.95 HOL023

STEYR HAHN M1912 PISTOL HOLSTERWell made in russet color with ammo pouch and we provide 10 original stripper clips. ......................$32.95 HOL027

WEBLEY .455 PISTOL HOLSTERFine leather holster for the MKVI Webley revolver as used in WWI & WWII. Brown color with brass hardware ......................... $29.95 HOL042

SWEDISH LAHTI PISTOL HOL-STER SETGenuine holster with two compartments for 9mm magazines and slots for a clean-ing rod & loading tool. Sarco offers the holster, 2 magazines, cleaning rod, loading tool, oiler and lanyard for $99.95 HOL005 *VERY LIMITED*

BRITISH WEBLEY .38 HOLSTERMK4 .38 cal. British service revolver holster. This holster provides great presenta-tion and has a large Birmingham proof mark on the reverse side. Brown leather with brass hardware .............................. $29.95 HOL077

GERMAN POCKET PISTOL “STASI” HOLSTEREast Germany reused everything they could from war time stockpiles. However, holsters were an item that they did have manufactured and they were known for making light and nimble close fitting Secret Police holsters. We have a small lot of holsters that were for PPK, HSC, and Mauser 1910 pocket pistols. Light, form fitting, and comfortable to wear ......... $19.95 HOL079

SIG P-230/ WALTHER PP POLICE HOLSTERBrown leather holster in exc. condition. Has spare mag. Pouch........................... $9.95 HOL064

WWII P38 SOFT SHELL HOLSTERWell-made black leather soft shell holster as used by the German Army in WWII. Thick leather, proper stitch-ing, spare mag pouch and period German markings on back make this a great value ................................................ $22.95 HOL080

GERMAN P38 HARDSHELL HOLSTERHand crafted heavy duty leather holster as used by the German Army in WWII. For the Walther P38 and also works with the Postwar P1. Complete with spare mag. pouch & German WW2 markings. Black....................................$19.95, 3 pcs for ....................................$49.95 P38054

C96 MAUSER BROOMHANDLE STOCK & HARNESSWell-made hardwood stock and leather holster. Pistol fitting connects quickly and the pistol can be stored in the wood stock and then inserted in the leather holster. Made famous during WWI. Stock & har-ness only ................... $179.95 MSR340

FOR BULK QUANTITIES, CALL MARK—Ext 224

HISTORICAL HOLSTERS

WALTHER P-22 LEATHER HOLSTERBlack leather holster safely secures the P22 pistol either with or without attachments like laser lights, suppressors mounted or unmounted and has a spare P22 mag pouch. Comes with additional leg strap and strap for cinching the holster closed when attachments are not used. Belt loop on back. Has suppressor pouch for original slim suppressors. Handles similar sized frames too like the Walther P99. U.S. embossed rugged leather perfect for the field...................................................................................................$26.95 HOL095

P-38 SHOULDER HOLSTER WWII TANKER version. This is a well-made shoulder holster in black leather with spare magazine pouch, strap and steel hard-ware. The back is adorned with the 6th Panzer ‘KEY’ emblem and waffenamp with date code stamp .....................................$35.00 HOL081

NEW ITEM!

Y1FOBUS HOLSTERS & ACCESSO-RIES ARE IN STOCK AND READY TO SHIP!! FOR DETAILS & BEST

PRICES ANYWHERE, CHECK WWW.E-SARCOINC.COM!

GERMAN OFFICER POCKET PISTOL HOLSTERGerman Field Grade Officers usually carried smaller pistols like the Mauser 1910 and PPK when they could obtain one. This holster holds both guns just like the original and comes complete with date code and Waffen stamps. Mag pouch on front and belt loop on back. Black leather .............................................. $29.95 HOL112

U.S. MODEL 1911 SHOULDER HOLSTERSU.S. embossed rugged M7 shoul-der holsters used by the military for 70 years+. Fits the Model 1911 and similar sized frames. A tanker’s favorite way to carry the pistol! 4 types to choose from:A. M7 BROWN SHOULDER HOLSTER – RIGHT HAND DRAW ..................$29.95 HOL067B. M7 BLACK SHOULDER HOLSTER RIGHT HAND DRAW .................................................................$29.95 HOL052C. M7 RUSSET BROWN WW2 COLOR PREMIUM GRADE HOLSTER, RIGHT HAND DRAW ................$35.00 HOL028

U.S. WW2 PISTOL LANYARDWoven cotton OD green lanyard with leather cinch and reinforced leather end with steel at-taching hook.@41 inches long. Very difficult to find originals! New made and used with Model 1911, S&W Model 10 etc .......................................$7.95 MISC385

WW2 GERMAN LUGER PISTOL LANYARDLeather lan-yard for use with Luger pistols. Complete with leather cinch and leather connector. Faithfully made from an original w/ Ger-man markings. 45" long $7.95 MISC384

U.S. PREMIUM GRADE HOLSTERSSarco offers a long line of standard grade quality holsters which can be found in this ad on the ‘Y’ page. We also offer some exceptionally tanned U.S. Military historic holsters for presentation grade pistols. The finish and crisp embossing are superior to our standard line and are still affordably priced. Beautiful quality holsters for your top grade pistols!A) 1916 Hip Holster (Right Hand & Left Hand Available)Model 1911 hip holster in original WW2 color of russet brown w/ leg strap. Right Hand draw:$35.00 HOL106Left Hand draw:.................................$35.00 HOL071B) 1917 S&W .45 REVOLVER HOLSTER (Left & Right)Butt back model in russet for the right hip with leg strap ................................................$35.00 HOL101Butt forward model for right hip with left hand draw. Can be used on left hip for left hand draw too .......................................................................................................................................$35.00 HOL102C) 1912 Cavalry Holster ( Right & Left Hand Available)Long drop cavalry holster for the Model 1911 pistol in the WW2 russet brown color with leg strap.Right Hand draw.............................................................................................................$35.00 HOL099Left Hand draw ...............................................................................................................$35.00 HOL070D) Victory Model S&W Revolver Holster (Right Hand)WW2 russet brown color .................................................................................................$35.00 HOL107E) Colt 1892 & S&W 1902 .38 Revolver HolsterOriginal russet color with brass ring at bottom. Made for the standard 5" barrel. Commonly called the M1905 holster ................................................................................................................$35.00 HOL103

WORLD OF LUGER HOLSTERS

www.e-sarcoinc.com

COLT 1903 ‘HAMMERLESS’ PIS-TOL HOLSTER w/ CLEANING RODFor the pistol favored by many U.S. Gener-als, we offer this finely made leather holster w/ cleaning rod $35.00 HOL065

WEST GERMAN GSG9 MP5K SMG HOLSTEROriginal leather holster for Police operations where the MP5 series SMG is strapped to the leg or assault pack .Used with the MP5A3 with mounted light/laser on end as well as MP5K. Old stock as used in the late 70s/80s. These are used, but in excellent shape. Very Limited! ....$90.00 HOL133

COMPACT PISTOL HOLSTERSturdy leather holster handles small frame pistols like the PP, PPK, Makarov, CZ27 etc. Popular with the ‘carry permit’ crowd! Belt loop on back and spare mag pouch on front. Excel-lent condition and very sturdy. Bargain priced while they last!... $4.00 Each, 10 for $38.00, 50 pcs for $175.00 HOL009

PPK & MINI COMPACT SHOULDER HOLSTEREast German Stasi low profile shoulder holster used by numerous po-lice agencies behind the Iron Curtain. Perfect for carrying backup pistols or maintaining a low profile with a sweater, vest, or dress jacket. Original, natural leather .....................................$14.95 HOL092

SIG 225/226 SHOULDER HOLSTERGerman Police shoulder holster for the SIG 225 & 226. Also referred to as the P6 holster. Comes with one spare magazine pouch with belt slots. Very well made with Ox blood finish and leather / elastic strap. Right hand draw ............................$19.95 HOL127

WEST GERMAN POLICE PPK BELT HOLSTERWell made right hand draw un-dercover holster nicely form fit and curved. Made for the PPK and similar sized pistols. Medium brown color. Used, but in very good condition. Leather ‘Pancake style’ .............................$14.95 HOL125

P6/SIG 225 WEST GERMAN POLICE HOLSTEROriginal West German Police ‘long drop’ leather holster. Extremely well made with detachable swivel attachment. Used, but in very good condition. Holds SIG 225 & similar sized pistol frames .$18.95 HOL120

WALTHER PP SHOULDER HOLSTERBlack leather shoulder holster used by the West German Police before the ‘wall’ came down. In excel-lent condition, and comfort-able to wear. Fits similar sized pistols to the Walther PP pistol. Excellent value! ............ $17.50 HOL135

SIG 225 /P38 MAGAZINE POUCHWest Ger-man Police spare mag pouch w/ belt slots. Exc. condition$5.00 Each, or pair for $8.95 MISC471

WEST GERMAN P6, SIG 225 HIP HOLSTEROriginal West Ger-man hip holster used by the Police. These have de-tachable belt loop hang-ers. Can be used without the hangers by running a belt through the back strap. Excellent condi-tion...$15.95 HOL136