space-grade complex cable assemblies · 2019-07-27 · spacewire (mil-dtl-83513) complex cable...
TRANSCRIPT
86 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
PROVEN PERFORMANCE IN SPACE
�� The “Golden Umbilical” life-support cable�� JPL Mars probes (orbiters, landers, and the Curiosity rover)�� AIRS satellite �� Gravity Probe mission�� Space Shuttle�� Titan II launch vehicles�� SpaceWire (MIL-DTL-83513)
Complex Cable AssembliesWe like to begin our presentation of Glenair’s proven-performance space-grade
products with the golden umbilical life support cable used by Commander Ed White in the first American space walk in 1965. This was a complex cable assembly with an exacting set of performance requirements. Even though this application is now over 50 years old, it still reflects Glenair’s design and fabrication expertise and that we have been a go-to supplier for the space industry for almost 5 decades. Today we continue to fabricate high-performance cables for space, from rugged Viton® overmolded designs to ultra-lightweight SpaceWire jumpers for the high-speed space data transmission protocol. Other notable space cable applications include:
� Dozens of robotic spacecraft, including orbiters, landers, and rovers, have been launched t o M a r s s i n c e t h e 1 9 6 0 s . Glenair cables have ridden along on several, helping to fulfill navigation, data and communication requirements.
� Complex interconnect cable assemblies made by Glenair have also traveled to and from orbit dozens of times on the Space Shuttle, as well as numerous space-launch vehicles. Glenair-made interconnect harnesses also served on all twelve manned Gemini capsules.
SPACE-GRADE
Commander Ed White on the first American spacewalk, 1965
with Glenair-manufactured “Golden Umbilical” cable
Complex Mighty Mouse cable harness for a Mars rover application
COMPLEX MULTIBRANCH AND OVERMOLDED CABLE ASSEMBLIES
AEROSPACE-GRADE INTEGRATED SYSTEMS
Precision-machined, injection molded or stamped-and-formed boxes and
structural members
Military-aerospace and space-grade multibranch interconnect cable
assembly staff and facilities
Turnkey integrated system assemblies
+ =
TURNKEY FACTORY-TERMINATED CONDUIT ASSEMBLIES
Complex multibranch high altitude electrical wire conduit assembly
Lightweight, halogen-free wire conduit assembly
Crush-resistant aerospace metal-core conduit assembly
Multibranch wire harness for a space lab application
Space-grade Micro-D flex assemby with NASA EEE-INST-002 screening
Hybrid flex/rigid flex multibranch Micro-D flex assembly with discrete RF circuits
Micro-D subminiature multibranch flex assembly
ESA and NASA screened Micro-D/Nano cable assembly
87© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
88 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Pyrotechnic-Free Space MechanismsHigh-reliability, non-explosive (split-spool) HDRMs, separation nuts, and pin pullers/pushers for dependable stowage and release of deployable space systems
SERIES 06 HDRM
Glenair HDRM space mechanisms are optimized for foolproof release reliability with built-in mechanical and electrical redundancy. The planned release of the
deployable satellite/payload is activated by a pre-determined value of electrical current to a fuse-wire system which causes the wire to break under tension
and allows a pre-loaded mechanical bolt to actuate. Glenair’s line of low-shock, redundant and non-redundant space mechanims
includes both HDRM devices as well as a family of pin pushers and pin pullers. Customer-defined housing and mounting configurations are available. Consult factory for specific
device TR level and qualification test reports.
Glenair pyrotechnic-free release mechanisms offer quick release time, low shock, relatively low power
input, and virtually no temperature sensitivity. Series includes separation nuts, HDRMs, pin pushers, and pin pullers—direct wired or connectorized—with
higher preload carrying capacity compared to competitor solutions.
Artist concept of NASA’s Juno spacecraft, exploring Jupiter. Credit NASA/JPL-Caltech
�� Pyrotechnic-free alternative (low-shock fuse-wire) for single-event release of deployable space systems—electrical initiation up to 5 amps�� User-serviceable and refurbishable units �� Redundant or non-redundant actuation circuit�� Not susceptible to transient and noise (EMI/EMP/ESD/RFI) inputs�� Extended temperature ranges: -150°C to +150°C
Note: Preloading assembly, release actuator, and load-carrying structure may also be custom-packaged per customer requirements
061-002Light-Duty HDRMNon-redundant circuit, 5 or 20 lb release preload
061-003Light-Duty HDRMRedundant circuit, 30 lb release preload
061-014Light-Duty HDRMNon-redundant circuit, 75 lb release preload, Side load bearing
061-007Medium-Duty HDRM Redundant circuit, 300 lb release
061-006Medium-Duty HDRM Redundant circuit, 1000 lb release preload
061-005Medium-Duty HDRM Redundant circuit, 2500 lb release preload
DEPLOYMENT APPLICATIONS
Solar Arrays Booms and Masts Antennas Reflectors
062-002Heavy-Duty HDRM Redundant circuit, 5000 lb release preload
063-001Heavy-Duty HDRM Redundant circuit, 8750 lb release preload
064-001Heavy-Duty HDRM Non-redundant circuit, 20,000 lb release preload
061-010Light-Duty Pin Pusher Non-redundant circuit6 lb push force
061-009Light-Duty Pin Puller Non-redundant circuit18 lb pull force
061-011Light-Duty Pin Puller Non-redundant circuit 18 lb pull force
061-013Medium-Duty Pin Puller Redundant circuit50 lb pull force
HDRM CATALOG PRODUCT SELECTION GUIDE
Rev. 01.15.1989© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect Solutions
Dimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
90 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� High-density .0625" pitch Chevron Contact System�� PCIe Rev 3 capable�� Signal integrity to 10.5Gb/sec.�� Polarized insulator and hardware options�� Solder free “eye of the needle” compliant tail for press fit installation �� High-temp PPS insulator meets NASA outgassing requirements�� Available wired / flex jumpers�� Available between-board spacers up to 1 inch
Mission-critical board-to-board connector applications demand fail-safe signal integrity as well as rugged and reliable harsh-environment performance. The
HD Stacker™ brings Glenair innovation to stacking board-to-board connectors with several significant design improvements: Ultra high-density .0625" Chevron Contact System provides 55% more contacts per connector size, or a 31% size reduction for the same number of contacts as compared to current industry solutions. Polarized connector bodies and available polarized guide pins prevent accidental mismating. The solder-free press-fit compliant pin contacts are removable, repairable, and available in custom lengths. HD Stacker™ connectors may also be ordered with pre-wired cable or flex jumper terminations. High-speed signal integrity test reports are available upon request. Choose HD Stacker™ for the ultimate in high-density, rugged board-to-board stackable connector performance.
High-density, solder-free, PCIe-ready board-to-board stackable connectors
HD STACKER™ FOR MISSION-CRITICAL BOARD-TO-BOARD APPLICATIONS
Solder-free press-fit (compliant pin) board mounting
Polarized shells and keyed guide pin hardware prevent mis-mating
Controlled signal integrity for differential applications
(PCIe Rev 3 capable) .0625" pitch contact spacing:
highest available density
PhoneSat 2.5 CubeSats at NASA Ames Research Center
.0625” PITCH COMPLIANT PINHigh-Density Stacker™
Rugged board-to-board stackable connectorsHD STACKER™ POSITION AND MATING COMPATIBILITY GUIDE
GSTT-PWPrewired, Top-of-Stack
Mates with GSTB
GSTFPrewired, Bottom-of-Stack
Mates with GSTB
GSTB (.095)Single-Sided Mate, Bottom-of-Stack
Mates with GSTB and GSTBL
GSTT-PSSolder Cup, Top-of-Stack
Mates with GSTB
GSTT-PFPC Tail (Flex), Top-of-Stack
Mates with GSTB
GSTBLSingle-Sided Mate, Top-of-Stack
Mates with GSTB and GSTB (.095)
GSTBUniversal Stacking Connector,
Top, MIddle, and Bottom Position Mates with:
• GSTB• GSTT-PW• GSTT-PS• GSTT-PF• GSTBL• GSTF
• GSTB (.095)
QUALIFICATION TESTING / HIGH-SPEED PERFORMANCE
Stacker connectors were qualified in accordance with MIL-DTL-55302G testing for:
• Contact engagement/separation• Contact retention• DWV
• Electrical resistance• Mechanical vibration and shock• Insulation resistance
• Thermal shock• Contact resistance• Humidity
High-frequency electrical performace tests were performed for: Insertion loss, return loss, crosstalk, and time domain performance metrics including impedance and eye pattern. Complete test reports are available at www.glenair.com/technical_information_test_reports
All Glenair HD Stacker™ connectors are equipped with our innovative .062"
pitch high-density Chevron Contact System (CCS).
Special non-orthogonal socket tines enable both
higher density layouts as well as improved signal integrity. The GSTB is equipped with
pin/socket contacts with solder-free press-fit board
mounting.
91© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
92 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� High-reliability TwistPin contact system�� #24-30 AWG wire size�� .050" pitch contact spacing�� Solder cup, pre-wired or PCB header terminations�� 3 Amps, +150C, 600 Vac
Series 171 MicroStrips™ are made for high-reliability wire-to-board and wire-to-wire applications. These high-density strip connectors are typically used in
ruggedized 3 Amp signal applications, where higher-performance contacts, precision machined shells and space-grade dielectrics offer significant advantages compared to commercial-grade headers and jumpers. Glenair’s rugged, high force TwistPin contact accepts up to #24 gage wire, the current rating is 3 Amps, the voltage rating is 600 Vac, and the temperature rating is -55C to +150C. The Series 171 Latching MicroStrip connector meets all applicable requirements of MIL-DTL-83513. Choose solder cup, pre-wired, or printed circuit board versions. A stainless steel latch provides secure coupling.
Latching MicroStrips™
TwistPin performance and durability in an economical, space-saving single row package
SERIES 171
Socket Insulator
Socket ContactTwistPin Contact
Mil-Spec Crimp Joint Pin Insulator
Epoxy Sealant
LATCHING MICROSTRIP™ CROSS-SECTIONAL VIEW
A PhoneSat 2.5 CubeSat, built at NASA’s Ames Research Center
SERIES 171Latching MicroStrips™Superior TwistPin contact performanceABOUT SPRING LATCHES, GUIDE PINS AND MOUNTING HOLES
Optional stainless steel latch clips provide secure mating when subjected to shock and vibration. A single center latch is suitable for most applications. Dual end latches are also available. The spring latch is always installed on the socket strip. The latch receiver is installed on the pin strip. To unmate the connectors, simply press the release tab while pulling the connectors apart. MicroStrips™ are available with stainless steel guide pins. A single guide pin provides circuit polarization. A guide pin on each end helps to align connectors when mating and prevents damage to contacts. For most applications the preferred configuration is a single center latch with no guide pins. Mounting holes are now available. Attach strips to circuit boards with size 0-80 screws (customer-supplied).
ABOUT BOARD MOUNT STRIPS
Space customers typically use MicroStrips™ for high reliability board-to-wire I/O applications. The pin strip is usually configured with right angle thru-hole PC tails. The strip is bonded to the PC board with epoxy, or attached to the board with screws installed in optional mounting holes. Surface mount and vertical mount versions are also available.
Right angle pin strip with staggered PC tails,
mounting holes and center latch
Socket strip with center latch
Pin strip with center latch and guide pins at
both ends
Right Angle PCB Header with End Latches and Mounting Holes.
Position #1 Identified with
White Dot
Latch Release Tab
Spring Latch Clip
.062" (1.57) Dia.Mounting Hole
2 Places
End Latches
Latch
.050" pitch single row surface mount back-to-back microstrip
SINGLE ROW BACK-TO-BACK MICROSTRIPS
93© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
SpaceWire Cable AssembliesFlight- and lab-grade SpaceWire qualified cable assemblies for IEEE 1355 space network node interconnection of routers, switches, recorders, transceivers, and other physical layer devices
The success of any space mission begins with reliable data transmission and Glenair Spacewire cables, built to meet the strict standards set forth by ECSS-E-ST-50-12C make
this a reality. Our Spacewire cables offer bidirectional, high speed data transmission rates up to 400 Mbits/s while significantly reducing cross talk, skew, and signal attenuation. By incorporating a serial, point-to-point cable, with low voltage differential signaling (LVDS) reduced costs are realized through an easily integrated data transmission cable. These features allow Spacewire cables to be incorporated across various satellite data transmission programs without the expense of costly design customization.
Glenair Spacewire assemblies begin with a high performance cable built with expanded polytetraflouroethylene (ePTFE) insulation. This material allows for low-loss transmission of LVDS signals, maximizing data-rates while allowing for the implementation of standard hardware protocols, thus eliminating the need for design customization and long lead time cable projects.
CONNECTOR/CABLE�� Laboratory and space-grade versions available�� Qualified MIL-DTL-83513 Micro-D connectors�� Gold-plated copper alloy TwistPin contacts�� Basic cable, 4 twisted pair cables and a ground�� Epoxy resin potting�� EMI banding backshell
PERFORMANCE�� 3 Amps�� Temperature tolerance -200° to 180° C�� 100 Ω impedance shielded signal pair�� Very low skew, signal attenuation and crosstalk�� 65dB minimum attenuation shielding effectiveness�� Low magnetic permeability IAW EIA-364-54
Physical layer SpaceWire router aboard the James Webb Space Telescope (NASA)
TYPICAL USES INCLUDE• EGSE applications• Radar sensor systems• Hi-resolution camera equipment• Sensor, mass-memory unit, and telemetry
subsystem interconnections
APPROVED FOR USE BY:• ESA• NASA• JAXA• RKA
94 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
POINT-TO-POINT AND SINGLE-ENDEDSpaceWire cable assembliesTechnical specifications / how-to-order
Back To Back WiringDiagram (GP)
1
6
2
7
3
8
4
9
5
9
5
8
4
3
2
7
1
6
P1 P2
Single Ended Wiring Diagram (P)
P1
1
6
2
7
3
8
4
9
5
L
Pin 1
Glenair Backshell
Pin 1
+3.00"-0.00"
Jackscrew Hardware
NOTES:1. Flight grade (cable Type F) assemblies to be
screened IAW NASA EEE-INST-002, Table 2. Level 1 with 100% thermal vacuum outgassing (24 hours/+125°C/10-6 torr). Reference Glenair Mod Code 429C.
2. Operating temperature - 200°C to +180°C. Reference Glenair Mod Code 428.
3. Electrical performance: Dielectric withstanding voltage: 600 VAC. Insulation resistance: 5000 megohms @500 VDC.
4. Assembly to be identified with Glenair’s name, Part Number, Cage Code and Date Code or ESCC Component Part Marking Standards.
MATERIALS/FINISH:• Shells/backshells - aluminum alloy/electroless
nickel. • Insulators - high grade rigid dielectric/N.A.• Contacts - copper alloy, gold plated.• Hardware - stainless steel/passivated.
How To Order Spacewire
Sample Part Number GSWM 2 L -9 GP -6 F B -16 S
Product Series GSWM–Glenair Spacewire Micro-D
Shell Plating 2–Electroless Nickel 5–Gold
Insulator Material L–LCP
Shell Size -9
Connector Type P–Single Ended Pin (Plug)GP–Pin (Plug) Connector Both Ends
Wire Gauge -6–26 AWG -8–28 AWG -0–30 AWG (30 AWG–Lab Only)
Cable Type F–Flight Grade L–Lab Grade
Termination Option B–Backshell
Cable Length In Inches -16 = 16 inches (12 inches minimum)
Hardware S–Male Slotted Jackscrew P–Female Jackpost
95© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
96 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Micro-D ConnectorsSERIES MWDM
�� High density Micro TwistPin contacts set on .050" centers
�� 9 to 130 contact arrangements
�� Pigtail, PCB, solder cup, and flex terminations
�� Single row, multi-row, low profile and high density insert arrangements
�� QPL and commercial versions
�� Same-day availability on all part numbers
�� Qualified for use in ESA, NASA, JAXA applications
Hermetic EMI FilterStandard
MasterLatch™ Surface Mount Rear Panel Mount Flex Circuit
TwistPin equipped MIL-DTL-83513 Micro-D connectors offer outstanding mating performance, durability and minimal contact resistance
JAXA Kibo Laboratory module from the International
Space Station
Certified SpaceWire cables for both laboratory/test applications and
flight applications S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
MIL-DTL-83513 AND COMMERCIALMicro-D ConnectorsMission-critical mating performance
WellMaster™ 260 Sav-Con® Latching MicroStrip Low Profile
Metal Shell Micro-D for Harnessing Applications
GRPM Solder CupGRPM
Insulated WireGRPM
Uninsulated WireMWDM Solder Cup
MWDM Insulated Wire
MWDM Back-To-Backs
Shielded Cable Assembly
MWDM Uninsulated Wire
GMDR Insulated Wire
GMDE Environmental GSWM SpaceWire GMLM MasterLatch
Micro-Ds for Printed Circuit Board
GRPM-CBS GRPM-CBR MWDM-BS MWDM-BR
MWDM-CBR MWDM-CBS 90° Surface Mount GMR7580
GMR7590 GMR7580C GMR7590C Right Angle Filter
97© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
98 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Nanominiature Connectors
SERIES 89
MIL-DTL-32139 qualified connectors for mission-critical board-to-wire applications—simply the smallest and lightest mil-spec connector in the business
THE NANO TWISTPIN ADVANTAGE
Transverse cross-section of a TwistPin contact crimped to
solid wire
�� Gas-Tight Crimp Joint
�� Better Shock and Vibration Performance
�� Corrosion Proof Contact Alloy
�� 1 Amp current rating
�� .025 Inch (0.64 mm) contact spacing
�� #30 And #32 gage wire accommodation
�� Single and double row
�� Metal shell, aluminum, titanium or stainless steel
�� TwistPin contact system
�� Gold alloy contact, unplated
�� Thru-hole and surface-mount PCB versions
The International Space Station
NANOMINIATURE CONTACT ARRANGEMENTS
Series 89 Nanominiature Product Selection Guide
Pre-WiredSingle RowConnectors
Pre-WiredPCB Connectors
Pre-WiredDouble RowConnectors
Double RowPCB Connectors
Pre-WiredMIL-DTL-32139Connectors
Insulated Wire Uninsulated Wire Back-to-Back Cables
Thru-Hole Vertical Thru-Hole 90° SMT Vertical SMT 90°
Insulated Wire Uninsulated Wire Back-to-Back Cables
Thru-Hole Vertical Thru-Hole 90° SMT Vertical SMT Straddler
Single Row, Insulated Wire Double Row, Insulated Wire
SMT 90°
SERIES 89Nanominiature ConnectorsThe smallest and lightest mil-spec connector
51P151
37P137
31P131
25P125
21P121
9P19
5P15
15P115
5S1 5
9S1 9
15S
1 15
21S1 21
25S1 25
31S1 31
37S1 37
51S
1 51
9S
1 5
6 9
15S
1
9
8
15
1
12
21S
11
21
25S
1 13
14 25
31S
1 16
17 31
37S
1 19
20 37
51S
1 26
27 51
65S
1 33
34 65
69S
1 35
36 69
85S
1 43
44 85
9P
5
9 6
1
15P9
18
15
21P12
111
21
25P
13
25 14
1
31P
16
31 17
1
37P
19
37 20
1
51P
26
51 27
1
65P
33
65 34
1
69P
35
69 36
1
85P
43
85 44
1
1
2241
21
4122
211
41S41P
9S
1 5
6 9
15S
1
9
8
15
1
12
21S
11
21
25S
1 13
14 25
31S
1 16
17 31
37S
1 19
20 37
51S
1 26
27 51
65S
1 33
34 65
69S
1 35
36 69
85S
1 43
44 85
9P
5
9 6
1
15P9
18
15
21P12
111
21
25P
13
25 14
1
31P
16
31 17
1
37P
19
37 20
1
51P
26
51 27
1
65P
33
65 34
1
69P
35
69 36
1
85P
43
85 44
1
1
2241
21
4122
211
41S41P
Series 89 Nanominiature Connector Performance Summary
Contact Spacing.025" (0.64mm) Contact Centers
Wire Accommodation
#30-#32 AWG
Current Rating 1 AMP Max
DWV250 VAC RMS Sea Level
Insulation Resistance
5000 Megohms Minimum
Operating Temperature
-55° C. to +125° C.
Contact Resistance
71 Millivolt Drop Maximum
Shock, Vibration 100g’s, 20 g’sDurability 200 Mating CyclesCorrosion Resistance
48 Hours Salt Spray
Mating Force5 Ounce Max, 0.4 Ounce Min
Single Row Mating Face of Pin(Plug) Connector
Now available: space-grade Nano circulars
Double Row Mating Face of Pin(Plug) Connector
D-Subminiature Connector25 Contacts
on 0.109 Inch Spacing
Micro-D Connector25 Contacts
on 0.050 Inch Spacing
Nano Connector25 Contacts
on 0.025 Inch Spacing
How Small Are They?
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
99© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
100 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
HiPer-D ConnectorsSpace-grade M24308 intermateable
�� Advanced temperature, vibration and EMC/electrical performance
�� 11 standard and 20 combo insert arrangements
�� High temperature epoxy insulators
�� Watertight sealing
�� Rugged machined one-piece shell
The HiPer-D connector is a M24308-type D-Subminiature connector with superior design features. Unlike standard M24308 connectors with stamped steel shells, the
HiPer-D connector features a one-piece machined shell, 200°C continuous operating temperature rating and enhanced, mated shell EMI/RFI protection via an integrated ground spring. Aerospace grade fluorosilicone grommets and face seals (JAXA / NASA outgassing available) provide environmental protection. The HiPer-D is intermateable, intermountable and interchangeable with standard M24308 D-Sub connectors.
ADVANCED-PERFORMANCE
JAXA Kounotori H2 Transfer Vehicle and the
Canadarm on the ISS
GrommetMachined Shell
Copper Alloy Contact Retention Clip
#20 or #22 M39029 Socket Contact
Copper Alloy Insert Retention Clip
High Temperature Thermoset Epoxy Front and Rear insulator
Sealing Compound
Grommet
Interfacial Seal
Machined Shell
EMI Spring
Copper Alloy Contact Retention Clip
Size 20 or 22 M39029 Pin Contact
Copper Alloy Insert Retention Clip
High Temperature Thermoset Epoxy
Front and Rear insulator
Sealing Compound
Size 8 High-Speed Pin
EMI Spring Option
ShellRetainer
Size 8 High -Speed Socket
Retainer MachinedShell
Machined Shell
EMI SpringGrommet
Interfacial Seal
Sealing Boot
Size #8 Pin Contact
2 Piece Rigid Dielectricwith Captivated Contact Retention Clip
Size #20 Pin Contact
Insert Retention Clip
Sealing Boot
Grommet
Machined Shell
Size #8 Socket
Contact
Insert Retention Clip
2 Piece Rigid Dielectricwith Captivated Contact Retention Clip
Size #20 Socket Contact
STANDARD AND HIGH DENSITY HiPer-D® - CUTAWAY
SERIES 28HiPer-D Space Grade Connectors Product features and specifications
HiPer-D M24308 COMBO-Ds for power, signal, and RF applications
HIGH-SPEED HiPer-D HIGH-PERFORMANCE M24308
Glenair HiPer-D M24308 D-sub connectors are ideally suited for CubeSat or NanoSat canister dispenser applications where rack and panel or connectorized wire assemblies
are used to communicate with HDRMs, pin pullers, pin pushers, door status sensors, as well as system communications and testing prior to
deployment of satellite equipment. Standardized usage of M24308 connectors on hardware interfaces simplifies interconnection and communication. Glenair HiPer-D space grade M24308 D-sub connectors eliminate potential
interconnect electrical problems on mission critical systems. Connectors are supplied with NASA/ESA/JAXA outgassing and screening in accordance with NASA EEE-INST-0002.
HiPer-D High-Performance D-Sub vs. MIL-STD-24308Specification / Feature M24308 HiPer-D
Temperature -55°C to +125°C -65°C to +200°CInsulator Thermoplastic Thermoset EpoxyShell Steel (Brass) Aluminum (SST)Voltage 1000 VAC 1000 VACGrounding Dimples in shell (not in Mil-Spec) Nickel-plated Copper Alloy EMI springEnvironmental No YesVibration, sine 20 g 60 gVibration, random N/A 43 gShock 50 g 300 gBolt-on backshells No Yes
�� Size #8 power and 50 ohm or 75 ohm RF contacts�� Mixed layouts with #8’s and #20’s�� 200°C continuous operating temperature�� 20 tooled layouts�� Crimp and PC tail terminations
Crimp contact non-environmental connectors with #8 contacts for high-speed data transmission�� One-piece rugged machined aluminum shell �� Two to five size 8 Coax, Twinax, Quadrax or Ochito contacts�� Common ground plane (no insulators)�� Available in straight and right angle PCB versions
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
101© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
102 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� Next-generation small form factor aerospace-grade circular connector�� Designed for general use in harsh application environments such as aircraft, industrial robotics and more�� Upgraded environmental, electrical and mechanical performance�� Integrated anti-decoupling technology�� Higher density 20HD and 22HD contact arrangements�� Glass hermetic, lightweight aluminum hermetic, and filtered versions�� +200° C temperature rating
Series 806 Mighty Mouse Mil-Aero ConnectorsAdvanced electrical, mechanical and environmental performance plus reduced size and weight compared to D38999
Series 806 offers significant size and weight savings while meeting key performance benchmarks for a broad range of applications such as commercial and military
aerospace, industrial robotics, transportation systems and more. Designed for general use in harsh vibration, shock and environmental settings—as well as high-altitude, unpressurized aircraft zones with aggressive voltage ratings and altitude immersion standards—the Series 806 Mil-Aero features numerous mechanical design innovations including durable mechanical insert retention, radial seals and triple-ripple grommet seals. Its reduced thread pitch and re-engineered ratchet prevent decoupling problems, particularly in small shell sizes, solving one of the major problems of shell size 9 and 11 MIL-DTL-38999 Series III connectors.
MIL-DTL-38999Smallest Size
.625 In. Mating Threads3 #20 Contacts or 6 #22
contacts
Series 806 Mil-AeroSmallest Size
.500 In. Mating Threads3 #20 Contacts or 7 #22
contacts
SAVE SIZE AND WEIGHT WITH SERIES 806 CONNECTORS
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
ESA Astronaut Alexander Gerst in the cupola of the
International Space Station
MIGHTY MOUSE MIL-AEROSeries 806 Ultraminiature Circular ConnectorsProduct Features
�� Next-generation high performance ultraminiature aerospace connector�� Reduced pitch triple-start 60° modified anti-decoupling stub ACME thread�� Higher density 20HD and 22HD contact arrangements�� +200°C operating temperature�� High strength 7075 alloy plug barrel�� “Triple ripple” wire sealing grommet (75,000 ft. rated)�� Snap in, rear release crimp contacts�� Metal contact retention clips�� Integral Nano-Band shield termination platform�� EMI shielding effectiveness per MIL-DTL-38999M para. 4.5.28 (65 dB min. leakage attenuation @ 10GHz)�� 10,000 amp indirect lightning strike�� 300g. shock�� MIL-S-901 Grade A high impact shock�� Aluminum and stainless steel versions�� Environmental crimp contact, glass-to-metal seal PC tail and solder cup hermetics, and EMI filter versions�� RoHS compliant nickel, nickel-PTFE, black zinc and stainless steel plus mil-grade cadmium finish options �� Printed circuit board versions with threaded flange
Interfacial Sealfluorosilicone rubber
Wire Sealfluorosilicone rubber
Wire Sealfluorosilicone rubber
Insert Retention RingStainless steel
Insert Retention RingStainless steel
Anti-Decoupling SpringStainless steel
Coupling NutAluminum alloy
Coupling Nut Retainer RingStainless steel
InsulatorsGlass-filled rigid dielectric
InsulatorsGlass-filled rigid dielectric
Plug BarrelHigh strength 7075 alloy
Receptacle ShellAluminum alloy
Jam NutAluminum alloy
Panel O-ringFluorosilicone
EMI Ground SpringNickel-plated BeCu
Plug ConnectorKEY FEATURES
Receptacle Connector
103© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
104 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� Next-generation small form factor aerospace-grade rectangular connector�� Scoop-proof recessed pin contacts�� 37 arrangements, 12 shell sizes for the ultimate in versatility�� Rugged aluminum alloy dual lobe shell�� Environmental�� EMI shielded�� Blind mating
Series 791The next-generation ultraminiature rectangular connector for demanding aerospace applicationsSometimes the simplest ideas are the best ideas. The Series 791 is a simple idea.
Let’s create a brand new class of connector – the ultraminiature rectangular. Let’s combine the versatility of the Series 790 Micro-D type connector with the rugged features of our popular HiPer-D M24308 type connector. Let’s add a unique dual lobe shell and let’s recess the pins to eliminate the possibility of scooping damage. Let’s add high speed datalink capability.
Originally designed for NASA’s Orion project, the 791 is qualified for manned space flight. The 791’s small size and blind mate capability make it a perfect choice for 2U and 3U electronics modules. Applications include radars, weapons systems,
comms gear, satellites, exoatmospheric vehicles, avionics, power distribution units, instrumentation, and everywhere else in need of a smaller, higher performance interconnect system.
HIGH PERFORMANCE
Polarized / keyed shells prevent mis-mating and allow designers to specify identical layouts side-by-side without
risk of circuit damage
ESA Astronaut Paolo Nespoli working on the ALTEA Shield isotropic equipment aboard
the ISS
About The Series 791
The Series 791 is an aerospace-grade
ultraminiature rectangular connector with EMI protection and environmental sealing. Originally developed for NASA’s Orion capsule, The 791 is qualified for manned space flight and is ideal for radars, weapons systems and avionics gear.
The Series 791 is available either with crimp pins or with printed circuit terminals. Machined aluminum alloy shells feature dual lobes for polarization. Contact sizes range from size 8 to size 23 in 37 arrangements. Pin contacts are recessed to prevent scooping damage while mating. Crimp contacts conform to M39029 requirements and are rear release.
An optional ground spring reduces susceptibility to EMI problems. Fluorosilicone face seals and wire grommets prevent moisture and contamination. Panel mount versions are available with an O-ring, or for improved panel bonding, a metal spring.
Board mount versions include straight or right angle terminals. Right angle PCB connectors feature an aluminum shroud covering the terminals.
Hardware options include screwlocks, jackscrews or guide pins for blind mate applications.
Save Size and Weight with Series 791 ConnectorsThe Next Generation Ultraminiature Rectangular Connector for
Demanding Aerospace and Defense Applications
�� 37 contact arrangements
�� Crimp-and-poke or epoxy-sealed board mount versions
�� Scoop-proof recessed pins
�� Size 23, 16, 12 and 8 contactsM-17P17 with size 16 contacts
Shell size A – the smallest 791
�� Two to 102 contacts
�� Coax, twinax, quadrax and Ochito octaxial contacts
�� Rugged aluminum shell with dual polarizing lobes
�� Straight and right angle printed circuit board mounting
�� 12 shell sizes
�� Guide pins for blind mate modules
�� Integral band platform for direct attachment of cable braid
�� -65°C to +150°C
�� Panel mount versions with O-ring or EMI spring
�� Contacts meet SAE AS39029 requirements
�� Internal ground spring for EMI protection
�� Approved for manned space flight
SERIES 791 MICRO-CRIMPNext-generation ultraminiature rectangularfor demanding aerospace applications
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
105© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
106 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Connector Savers and Bulkhead Feed-Thrus
SAV-CON®
The smart solution for preventing contact damage and extending the service life of cable assemblies and box and panel-mount receptacles
�� Sav-Con®s for every Military Standard connector—circular and rectangular
�� Hundreds of successful space launch and space flight applications
�� Glenair Sav-Con®s on board every Space Shuttle mission flown
�� Bulkhead feed-thrus for environmental, filter and hermetic applications
�� Pin/pin, pin/socket, and socket/socket versions
�� Traditional plug-receptacle savers, as well as in-line versions and gender changers
�� Available EMI/EMP filter savers and adapters
�� Optional locking mechanism
circular and rectangular configurations available including hermetic and EMI/RFI
filter configurations
Series changers and gender changers available in both Sav-Con® and bulkhead
feed-thru configurations
Glenair Sav-Con®s protected the umbilical connectors on every
Space Shuttle mission
HIGH-PERFORMANCE CONNECTOR GO-BETWEENSSav-Con® Connector Savers and Bulkhead Feed-Thrus
Each Glenair Sav-Con® Connector Saver meets the military specification performance requirements of its mating connector. Glenair manufactures and supplies a Sav-Con® connector saver for every military standard connector currently in use including:
�� MIL-DTL-26482 Series I and II
�� MIL-DTL-28840
�� MIL-DTL-38999 Series I, II and III
�� MIL-DTL-83723
�� LN 29729 (SJT)�� PATT 105 and PATT 602�� MIL-DTL-5015�� Series 801 and 805 Mighty Mouse�� Series 89 Nanominiature
�� M24308 D-Subminiature
�� MIL-DTL-83513 Micro-D Subminiature
�� Series 28 HiPer-D M24308 intermateable
�� Series 79 Micro-Crimp
Comprehensive materials, plating, and polarization options available
TRADITIONAL PLUG-RECEPTACLE SAV-CON® CONNECTOR SAVERS
BULKHEAD FEED-THRUS
SPECIAL-PURPOSE ADAPTERS AND SAVERS
MIL-DTL-38999 series III type
Special high-voltage power bulkhead feed-thru
Special wide panel accommodation Mighty Mouse bulkhead feed-thru
MIL-DTL-5015 bulkhead feed-thru
Special non-cadmium plating classes
EMI/RFI filter Sav-Con® adapter (D38999 Series III type shown)
Rectangular EMI/RFI filter Sav-Con adapter (MIL-DTL-83513 type shown)
Power distribution connector savers (MIL-D-5015 type shown)
Series 80 Mighty Mouse Sav-Con®
MIL-DTL-38999 series II bayonet-coupling saver
Series 89 Nanominiature rectangular
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
107© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
108 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� Blind-mate, float mount interconnects for non-ITAR commercial as well as military/defense applications�� Optional assisted release (spring force) solutions to overcome pin/socket engagement force�� Panel-mount versions feature self-aligning float-mount technology for repeatable mating and de-mating�� Available in most symmetrical MIL-STD-1560 insert arrangements with contacts sizes from #23 to #12�� Selected materials offer low outgassing properties and high resistance to both corrosion and stress corrosion cracking�� Optional outgassing bake-out process available�� Designed to withstand the rigors of launch and flight—including shock, vibration, thermal vacuum, acceleration, and temperature extremes�� Standard accessory threads and teeth per MIL-DTL-38999 accommodate a wide range of backshell accessories
Unmated Test Voltages, AC RMS, 60 Hz
Altitude (Feet) Service Rating M Service Rating N Service Rating I Service Rating II
Sea Level 1300 1000 1800 230050,000 550 400 600 80070,000 350 260 400 500
100,000 200 260 200 200
Current RatingSize Contact Amps
23 522D 520 7.516 1312 23
A p p l i c a t i o n : G l e n a i r S e r i e s 2 5 3 connec tors are designed to meet applicable environmental, electrical and mechanical performance characteristics of D38999 Series III. The technology is well suited for use in commercial blind-mate instrumentation panels, satellite deployment, scientific research and development payloads, as well as interstage, UAV, and munitions release applications.
Blind-Mate Connectors Rack and Panel Sealed, Assisted Kick-off and Feed-Through Blind-Mate to D38999
NASA’s STEREO (Solar TErrestrial RElations Observatory),
artist’s concept
Available non-ITAR rack-and-panel blind-mate and zero separation force solutions
Basic Part No. Description Mates With
253-014 Float-mount plug with roll-on roll-off nose, environmental crimp contact 253-015253-015 Float-mount receptacle with optional auxiliary seal and misalignment accommodation, environmental crimp contact 253-014253-016 Float-mount plug with roll-on roll-off nose and spring-assisted release, environmental crimp contact 253-017253-017 Float-mount receptacle with spring-assisted release and misalignment accommodation, environmental crimp contact 253-016253-018 Bulkhead feed-thru with optional threaded plug or jam nut receptacle side IAW MIL-DTL-38999 Series III 253-019253-019 Blind mate float mount jam nut receptacle with misalignment accommodation 253-018
253-033 Blind mate float mount jam nut receptacle and MIL-DTL-38999, series III feed-through with misalignment accommodation253-018 and
38999
Also available: consult factory for specifications and how-to-order information
Basic Part No. Description Mates With
253-022 Hermetic, blind mate receptacle 253-015253-027-07 Blind mate PC tail receptacle with threaded standoff 253-015
Space-grade blind-mate Float-mount and assisted-release connectors
CRITICAL MECHANICAL FEATURES OF BLIND-MATE CONNECTORS WITH ASSISTED SEPARATION FORCE (ASF) AND MISALIGNMENT ACCOMMODATION
PRODUCT SELECTION GUIDE
Assisted separation: Spring-loaded kick-off posts are designed to overcome contact separation force (normal force) with adjustable flange-mounted springs. Separation force may be calibrated IAW application requirements and insert arrangement.
Assisted separation: Adjustment ring on receptacle shells provides reliable and repeatable calibration of assisted separation force. The adjustment ring interfaces directly with the spring-loaded kick-off posts on the plug. A set screw fitting locks the ring in place after adjustments have been made.
Roll-off nose: allows for the smooth disconnection of a blind mate connector. Without this feature, connectors can catch or hang during mate and demate.
Misalignment accommodation: Radial, axial, and angular misalignment in blind-mate applications is resolved in the receptacle design with mechanical float mounting and integral wave form springs.
Sealing: Integrated misalignment accommodation makes environmental sealing difficult in blind mate circulars. Glenair SuperNine® blind-mate and assisted release connectors are available with auxiliary exterior seals.
EMI shielding: Glenair blind-mate circulars are available with auxiliary ground springs on receptacles, and ground fingers on plugs (shown), to optimize 360° shell-to-shell continuity.
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
109© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
110 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
�� Jam-free, push on/pull off technology�� Reliable fail-safe axial pull lanyard equipped coupling�� Instant disengagement for critical quick-release systems�� Manufactured IAW MIL-STD-1760�� Special umbilical buffers and go-betweens also available�� Blind-mate rack-and-panel versions available�� Qualified for military and space application�� Outgas processing IAW NASA, ESA and JAXA
Lanyard-Release Quick-Disconnect ConnectorsFor mission-critical disengagement and release of launch and payload systems
Mil-standard 1760 lanyard-release connectors were originally developed for carriage stores management applications including weapons, pods, and drop
tanks. Incorporating a common electrical interface as well as interfacing signals and pin and circuit assignments, lanyard-release connectors of this type are broadly employed for reliable, jam-free mating and disengagement. Space-rated versions of 1760 class cylindrical connectors take advantage of the technology’s legacy in harsh-duty aircraft applications to ensure reliable and predictable performance in space. From fail-safe application in space station and space telescope deployment to rack-and-panel research equipment interconnection, these rugged axial-pull lanyard connectors deliver proven performance in accordance with all applicable NASA, ESA, and JAXA standards. Available in a wide range of connector packaging, from MIL-DTL-38999 SuperNine® to AS81703* and special small form-factor designs, these proven-performance interconnection devices may be equipped with standard signal or power contacts as well as shielded high-speed coax, twinax, and quadrax.
SPACE-RATED
Launch of a Japanese H-IIA rocket with the Global Precipitation Measurement
(GPM) Core Observatory onboard, from the Tanegashima Space Center
AS81703 space-grade lanyard release push pull mated pair with special
order band and boot platform
SPACE-GRADELanyard-Release Quick-Disconnect Connectors
How To Order SuperNine® 233-216 MIL-DTL-38999 Type
Sample Part Number 233-216 -G6 ME 25-35 S A E -4
Series / Basic Part No. 233-216 = Lanyard Release PlugConnector Style G6 = Plug with EMI Spring
FinishZL = Cres, Electrodeposited Nickel Z1 = Cres, PassivatedME = Al Alloy, Eletroless Nickel
Size and Arrangement Per MIL-STD-1560 plus high densityContact Type P = Pin S = Socket; 500 cyclesAlternate Key Position A, B, C, D, E, N = Normal (Per MIL-DTL-38999 Series III)Lanyard Length Code See Lanyard Length TableConnector Type 4 = Type 4 (shown below, no accessory threads) 6 = Type 6 (not shown, includes accessory threads)
How To Order 253-020 AS81703* Type Push-Pull Lanyard Release
Sample Part Number 253-020 -08 ME 25-35 S N 812
Series / Basic Part No. 253-020 = AS81703 TypeConnector Style 08 = Push-Pull Layard-Release Plug
Finish ZL = Cres, Electrodeposited Nickel Z1 = Cres, Passivated ME = Al Alloy, Eletroless Nickel
Size and Arrangement Per AS81703Contact Type P = Pin S = SocketAlternate Key Position N, W, X, Y, B, C Lanyard Ring Mod Code 812 = Lanyard ring rotated 90° from master keyway Omit for standard ring
Medium DiamondKnurl (Optional).061-.071 Ø Wire,
Cres, .093 OD Nylon Jacket
Grounding Spring
1.81 Max(46.0 Max)
B Thread
F Thread
Ø1/16 Stainless Stl.Wire Rope
Swaging Ball4.5±.5
Type -4
*The MIL-C-81703 standard was superseded by SAE-AS81703 10-December 2010 per Navair
S C R E E N E D
NASAESA, JA X A
SPACE G
RADE
111© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E
112 © 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Backshells and Connector Accessories
CIRCULAR AND RECTANGULAR
�� High-performance connector accessories for every environmental, mechanical and electromagnetic shielding requirements
�� Qualified to AS85049, SSQ 21635, 21636, 22698 and 22681 and other standards and specs
�� EMI shield termination, cable strain relief, connector protective covers and more
�� Lightweight composite versions
�� QPL’d AS85049 backshells
�� Tens of thousands of popular part numbers in inventory ready for same-day shipment
Corrosion resistance, weight reduction, environmental durability and design innovation
The Glenair Qwik-Clamp connector accessory shown here is used on the International Space Station. This gold plated part is extremely resistant to space corrosion and radiation and is designed with all smooth surfaces to eliminate potential damage to space suits.
Nowhere in the world does anyone manufacture and supply such a complete selection of backshell connector accessories—for space as well as all other
mission-critical applications. In addition to traditional metal materials, Glenair also manufactures an extensive line of lightweight, corrosion-free composite thermoplastic interconnect components ideally suited for systems requiring electromagnetic compatibility, long-term durability and weight reduction.
Dr Chiaki Mukai is a cardiovascular surgeon and JAXA astronaut, the first
Japanese woman in space
SPACE-GRADE INNOVATIONSCircular and rectangular backshells and connector accessories
Band-in-a-Can composite backshell
Composite Swing-Arm with keyed drop-in banding insert
Isolated conductive ground path
COMPOSITE DESIGN INNOVATION RADICALLY REDUCES INTERCONNECT SYSTEM WEIGHT
All-in-one booted “Piggyback” backshell
Spring-Loaded “Flop-Lid”Protective Cover
TAG-Ring/Qwik-Ty® Feed-Through Fitting
Environmental Protective Covers
Mighty Mouse composite EMI/RFI banding backshell
Series 437-001 Backshell “Connector Saver”
Ultra Low-ProfileBackshell
Special Space Grade Rectangular Backshell
High-PerformanceBanding Backshell
BACKSHELL INNOVATION SHOWCASE
SPACE-GRADE MICRO-D AND D-SUB BACKSHELLS AND ACCESSORY HARDWARE
Solid shell, lightweight aluminum
Solid shell, ultra-lightweight composite
Solid shell, trapezoidal, low-profile flange,
lightweight aluminum
Solid shell, standard flange, lightweight
aluminum
Split shell, standard and extended shroud
113© 2019 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Space-Grade Interconnect SolutionsDimensions in Inches (millimeters) are subject to change without notice.
INTE
RCON
NECT
SHO
WCAS
E