sp-90-00

NIOEC-SP-90-00(2) DOCUMENT CODE NO. OF PAGES: 75

PLAN/PRJ/SUB UNIT PHASE DISCIPLINE DOCUMENT TYPE SERIAL NO. REV. NO. DATE NIOEC 000 EG GN SP 9000 A4 APRIL, 2007

NATIONAL IRANIAN OIL REFINING & DISTRIBUTION COMPANY

NATIONAL IRANIAN OIL ENGINEERING

& CONSTRUCTION COMPANY

NIOEC SPECIFICATION

FOR

GENERAL INDEX

SECOND EDITION

MARCH, 2007 THIS SPECIFICATION IS THE PROPERTY OF NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY. IT IS CONFIDENTIAL AND ALL RIGHTS RESERVED TO THE OWNER. NEITHER WHOLE NOR ANY PART OF THIS DOCUMENT MAY BE DISCLOSED TO ANY THIRD PARTY, REPRODUCTED, STORED IN ANY RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN CONSENT OF THE NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY

APRIL, 2007 NIOEC-SP-90-00(2)

IN THE NAME OF GOD

FOREWORD By their very nature, technical standard specifications are continuously subject to modifications and revisions. To strengthen their merit and usefulness, continuous improvements, addendum, deletion of disparate information and consequently provision of updated revisions are to be made in order to ascertain that such standard specifications meet the current requirements, inclusive of Iranian Petroleum Standards (IPS) and the recognized and acceptable national and international standards, as well as the optimal codes and practices based on the accumulated in-house know-how and plant knowledge and experiences. However, in reality, due to several reasons, not to mention the complexity of the matter, the ultimate goal of continuous direct embedment of the required changes on the relevant standard specifications may be far reaching. Therefore, in the interim periods between the officially issued revisions, the required changes will appear in other documents related to the engineering and design work of the on going projects. In response to the initiative of the Design Division of the Engineering and Construction Directorate, and considering that the task of the execution of several important and mega projects for the realization of the new oil refineries, pipelines and oil terminals as well as improvements of the existing facilities, has been assigned to NIOEC, it was decided to update the NIOEC Specifications and to issue new official revisions. The Design Division of the Engineering and Construction Directorate was itself entrusted to carry out this important task, and as such by forming several special technical committees, working in close co-operation and cohesion and sharing their expertise and knowledge, the updated and revised NIOEC Specifications were successfully prepared and complied. These Specifications are intended to be used for Oil Refineries, Distribution Depots, Oil Terminals, Pipelines and Pump Stations within NIOEC's projects, and have been proven to be of high value for such purposes. It must however be appreciated that these Specifications represent the minimum requirements and should in no way be interpreted as a restriction on the use of better procedures, engineering and design practices or materials. We encourage and highly appreciate the users and other clear sighted and experts to send their comments on the Specifications to the Design Deputy of the Engineering Department of NIOEC for evaluation and consideration.


REVISION INDEX

REV. PAGE

1 2 3 4 5 REV. PAGE

1 2 3 4 5 REV. PAGE

1 2 3 4 5 REV. PAGE

1 2 3 4 5

1 26 X X 51 X X 76

2 X 27 X X 52 X X 77

3 X 28 X X 53 X X 78

4 X 29 X X 54 X X 79

5 X 30 X X 55 X X 80

6 X 31 X X 56 X X 81

7 X 32 X X 57 X X 82

8 X 33 X X 58 X X X 83

9 X 34 X X 59 X X X 84

10 X 35 X X 60 X X X 85

11 X 36 X X 61 X X 86

12 X 37 X X 62 X X 87

13 X 38 X X 63 X X X 88

14 X 39 X X 64 X X X 89

15 X 40 X X 65 X X X 90

16 X 41 X X 66 X X 91

17 X 42 X X 67 X X 92

18 X X 43 X X 68 X X 93

19 X X 44 X X 69 X X 94

20 X 45 X X 70 X X 95

21 X 46 X X 71 X X 96

22 X X 47 X X 72 X X 97

23 X X 48 X X 73 X 98

24 X X 49 X X 74 X 99

25 X X 50 X X 75 100

NOTES: 1) THIS SHEET IS A RECORD OF ALL REVISIONS TO THIS SPECIFICATION.

2) REMARKS RELATED TO EACH REVISION SHOW A BRIEF DESCRIPTION. THESE REMARKS SHALL BE INTERPRETED IN CONJUNCTION WITH THE REVISED TEXT MARKED BY REVISION NUMBERS.

3) WHEN APPROVED EACH REVISION SHALL BE CONSIDERED AS A PART OF THE ORIGINAL DOCUMENT.

4) NUMBER OF PAGES EXCLUDES THIS SHEET AND THE COVER SHEET.

A5 A4 APRIL, 2007 M.R.FARZAM M.R.FARZAM M.A.A.SAJEDI

A3 MARCH, 2007 M.R.FARZAM M.R.FARZAM M.A.A.SAJEDI

A2 FEBRURAY, 2006 M.R.FARZAM M.R.FARZAM M.A.A.SAJEDI

A1 DECEMBER, 2005 M.R.FARZAM M.R.FARZAM M.A.A.SAJEDI

A0 JULY, 2005 M.R.FARZAM M.R.FARZAM M.A.A.SAJEDI

REV. DATE PREPARED CHECKED APPROVED AUTHORIZED


CONTENTS: PAGE NO. 1. SCOPE ........................................................................................................................................ 2 2. TECHNICAL COMMITTEE(T.C.) ........................................................................................ 2 3. REQUIRMENT FOR REVISING NIOEC SPECIFICATIONS .......................................... 2 4. SYSTEMATIC REVIEW ......................................................................................................... 2 5. AMENDMENT .......................................................................................................................... 2 6. WITHDRAWAL ........................................................................................................................ 2 7. UP DATING ............................................................................................................................... 3 8. SPECIFICATION FORMS ...................................................................................................... 3

1


1. SCOPE

NIOEC Specifications cover the general requirements for detailed engineering, procurements, testing inspection & construction of refinery/ oil plant, distribution depots, pump stations and pipelines. This INDEX lists the NIOEC Specifications on the date of issue of this document. They are listed by the subject and contains lists of 222 NIOEC Specifications and 760 Standard Drawings. The main sections of this Specification are the list of Specifications and Standard Drawings by subject. The aim of this approach is to provide optimum possibilities for the selection of Specifications/Standard Drawings interrelated by their subjects. In the subject INDEX, in addition to the standard title, the number of pages and the revision number are given.

2. TECHNICAL COMMITTEE(T.C.)

The NIOEC Specifications are developed and maintained by a number of Technical Committees (T.C.). Each T.C. is composed of at least three authorized specialists. There are at present 12 such committees each representing one of the 12 fields or disciplines for which Specifications/Standard Drawings are prepared.

3. REQUIRMENT FOR REVISING NIOEC SPECIFICATIONS

The various reasons for which an NIOEC Specification/Standard Drawing may require amendment/revision are described bellow: - Systematic review - Change of regulations - Change of national and/or international standard - Findings of technical audits - Change in Technology - Commercial reason - Other changes

4. SYSTEMATIC REVIEW

In accordance with the NIOEC directives each Specification/ Standard Drawing shall be subject to systematic review by the relevant T.C. not more than 4 years after publication. To determine whether it should be confirmed, amended, revised, converted to another form of deliverable, or withdrawn.

5. AMENDMENT

During formal revisions, if a Specification/Standard Drawing requires urgent consideration, the matter will be notified to the relevant Technical and Engineering Services and/or T.C. . Should the query be approved by the T.C., the custodian will prepare an amendment to the document and make it rapidly dispatched to all registered holders.

6. WITHDRAWAL

Withdrawal of an NIOEC Specification/Standard Drawing happens when the Specification/Standard Drawing is out-of-date and/or no longer needed. Following the approval for withdrawal, the Engoneering Services will be notified by a circular, to which attention will be drawn to the withdrawn Specifications/Standard Drawings and it’s replacements.

2

APRIL, 2007 NIOEC-SP-90-00(2) When applicable, the replaced Specifications/Standard Drawings will have the same NIOEC-SP /NIOEC-SD number as the withdrawn Specification/Standard Drawing. The revision number will be shown in parenthesis. The withdrawn Specifications/Standard Drawings will not be supported by NIOEC, and continuing the use of these Specifications/Standard Drawings will be at local management discretion.

7. UP DATING

The NIOEC Specifications/Standard Drawing are in the process of being updated by the NIOEC through Technical Committees (T.C.). NIOEC welcomes any suggestions and comments concerning these Specifications/Standard Drawings from technical bodies or experts for improvement of technical quality of these Specifications/Standard Drawings. Comments and/or recommendations are evaluated in the relevant Technical Committee, and will be considered in the next edition, upon approval.

8. SPECIFICATION FORMS

The NIOEC Specifications/Standard Drawings are prepared in both printed form and electronic form. The printed form of the Specification/Standard Drawing are available in a covered booklet in A4/A3 size, which shows NIOEC Specification/Standard Drawing Number with revision number in parenthesis and Issue date on the top right corner and Title of Specification at the center of the front cover. The electronic forms of Specification/Standard Drawing are available on CD, prepared by Word / CAD / PDF under Windows. All above documents are packed on a CD.

3


4

VOLUME 1

BOOK 1 OF 2 PROCESS

Document No. NIOEC Specifications

Plan / Proj.

Unit Code Phase Disc. Doc.

Type Serial

No. No. of Pages

Rev. No. IPS No. Reference

No. Title

PROCESS

NIOEC 000 EG PR SP 0010 3 A0 IPS-E-GN-100

NIOEC-SP-00-10

NIOEC SPECIFICATION FORUNITS

NIOEC 000 EG PR SP 0011 4 A0 - NIOEC-SP-00-11

NIOEC SPECIFICATION FORSITE CONDITIONS


NIOEC SPECIFICATION FORDESIGN CRITERIA FOR PROCESS AND MECHANICS


NIOEC SPECIFICATION FORBASIC DESIGN PACKAGE

NIOEC 000 EG PR SP 0052 3 A0 IPS-E-PR-170

NIOEC-SP-00-52

NIOEC SPECIFICATION FORPROCESS FLOW DIAGRAM


NIOEC-SP-00-53

NIOEC SPECIFICATION FORLAYOUT & SPACING


NIOEC-SP-00-54

NIOEC SPECIFICATION FORBASIC ENGINEERING DESIGN DATA(BEDD)


NIOEC-SP-00-55

NIOEC SPECIFICATION FORPIPING& INSTRUMENTATION DIAGRAMS(P&I Ds)


NIOEC-SP-00-56

NIOEC SPECIFICATION FORPERFORMANCE GUARANTEE


NIOEC-SP-00-58

NIOEC SPECIFICATION FORSTART-UP SEQUENCE & GENERAL COMMISSIONING PROCEDURES


NIOEC-SP-00-59

NIOEC SPECIFICATION FORPLANT OPERATING MANUALS


NIOEC-SP-00-60

NIOEC SPECIFICATION FORPLANT TECHNICAL & EQUIPMENT MANUALS (ENGINEERING DOSSIERS)


NIOEC-SP-00-62

NIOEC SPECIFICATION FORNUMBERING SYSTEM


NIOEC-SP-00-64

NIOEC SPECIFICATION FORPROCESS DESIGN OF PRODUCTION AND DISTRIBUTION COMPRESSED AIR SYSTEMS


5

VOLUME 1

BOOK 2 OF 2 PROCESS


Plan / Proj.


Type Serial

No. No. of Pages


No. Title

PROCESS


NIOEC-SP-00-65

NIOEC SPECIFICATION FORPROCESS DESIGN OF FUEL SYSTEMS


NIOEC-SP-00-66

NIOEC SPECIFICATION FORPROCESS DESIGN OF LIQUID & GAS TRANSFER & STORAGE


NIOEC-SP-00-68

NIOEC SPECIFICATION FORPROCESS DESIGN OF LOADING & UNLOADING FACILITIES


NIOEC-SP-00-71

NIOEC SPECIFICATION FORPROCESS DESIGN OF COOLING WATER CIRCUITS


NIOEC-SP-00-72

NIOEC SPECIFICATION FORPROCESS DESIGN OF HOT OIL & TEMPERED WATER CIRCUITS


NIOEC SPECIFICATION FORPRESSURE AND VACUUM RELIEF DEVICES


NIOEC-SP-00-76

NIOEC SPECIFICATION FORPROCESS DESIGN OF FLARE & BLOW DOWN SYSTEMS


NIOEC-SP-00-77

NIOEC SPECIFICATION FORPROCESS DESIGN OF EMERGENCY MEASURES


NIOEC-SP-00-82

NIOEC SPECIFICATION FORPLANT WASTE WATER SEWER SYSTEMS


NIOEC-SP-00-83

NIOEC SPECIFICATION FORPLANT WASTE WATER TREATMENT & RECOVERY SYSTEMS


NIOEC-SP-00-84

NIOEC SPECIFICATION FORPLANT SOLID WASTE TREATMENT & DISPOSAL SYSTEMS


NIOEC-SP-00-85

NIOEC SPECIFICATION FORPROCESS REQUIRMENTS OF CAUSTIC AND CHEMICAL SYSTEM


6


Plan / Proj.


Type Serial

No. No. of Pages


No. Title


NIOEC SPECIFICATION FORPOLYELETROLYTE AND MIXING SYSTEM


NIOEC SPECIFICATION FORFLOATING SKIMMER


NIOEC SPECIFICATION FORRECOMMENDED PRACTICE FOR FEASIBILITY STUDIES


NIOEC-SP-00-97

NIOEC SPECIFICATION FORPROCESS DESIGN OF GAS (VAPOR) - LIQUID SEPARATORS


NIOEC-SP-00-98

NIOEC SPECIFICATION FORPROCESS DESIGN OF SOLID - LIQUID SEPARATORS


7

VOLUME 2

BOOK 1 OF 1 CIVIL AND HVAC


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

SITE WORK

NIOEC 000 EG CE SP 0001 55 A1 - NIOEC-

SP-00-01

NIOEC SPECIFICATION FORCIVIL DESIGN CRITERIA


SP-00-02

NIOEC SPECIFICATION FORSITE PREPARATION - EARTHWORK AND SEWERS


SP-00-03

NIOEC SPECIFICATION FORGROUND TREATMENT AND TRIAL TAMPING


SP-00-04

NIOEC SPECIFICATION FORFOUNDATION FOR TANKS


SP-00-05

NIOEC SPECIFICATION FOREXCAVATION AND BACKFILL FOR CONCRETE WORK

CONCRETE


SP-10-01

NIOEC SPECIFICATION FORCONCRETE


SP-10-02

NIOEC SPECIFICATION FORHIGH TEMPERATURE PROTECTION FOR CONCRETE


SP-10-03

NIOEC SPECIFICATION FORLOW TEMPERATURE PROTECTION FOR CONCRETE


SP-10-04

NIOEC SPECIFICATION FORCONCRETE USED FOR FIREPROOFING


SP-10-05

NIOEC SPECIFICATION FORCONCRETE FOR UNDERGROUND PROTECTION SLABS


SP-10-06

NIOEC SPECIFICATION FORDESIGN OF ROADS & ASPHALTIC CONCRETE PAVING


SP-10-07

NIOEC SPECIFICATION FORASPHALT INTERLINER MEMBRANE AND ACID BRICK LINING FOR CONCRETE PITS

NIOEC 000 EG CE SP 1011 3 A0 IPS-C-

CE-355

NIOEC-SP-10-11

NIOEC SPECIFICATION FORDEMOLITION


8


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

NIOEC 000 EG CE SP 1012 8 A0 IPS-E-

CE-130

NIOEC-SP-10-12

NIOEC SPECIFICATION FORPILES(PART ONE & PART TWO)


CE-340

NIOEC-SP-10-13

NIOEC SPECIFICATION FORWATER RESOURCES & DISTRIBUTION

NIOEC 000 EG CE SP 1014 3 A0 IPS-G-

CE-170

NIOEC-SP-10-14

NIOEC SPECIFICATION FORCULVERT BRIDGES AND RELATED STRUCTURES

NIOEC 000 EG CE SP 1015 6 A0 IPS-G-

CE-470

NIOEC-SP-10-15

NIOEC SPECIFICATION FORONSHORE FACILITIES


CE-140

NIOEC-SP-10-16

NIOEC SPECIFICATION FORRETAINING WALLS & SLOPE PROTECTION


CE-110

NIOEC-SP-10-17

NIOEC SPECIFICATION FORSOIL ENGINEERING

STRUCTURAL STEEL

NIOEC 000 EG ST SP 2001 10 A0 - NIOEC-

SP-20-01

NIOEC SPECIFICATION FORSTRUCTURAL STEEL FABRICATION


SP-20-02

NIOEC SPECIFICATION FORSTRUCTURAL STEEL ERECTION


SP-20-03

NIOEC SPECIFICATION FORFENCE AND GATE


SP-20-04

NIOEC SPECIFICATION FORSTACK FABRICATION

BUILDINGS

NIOEC 000 EG BD SP 3004 83 A0 - NIOEC-

SP-30-04

NIOEC SPECIFICATION FORWORK TO BE DONE AND MATERIALS TO BE USED IN MASONRY BUILDINGS

NIOEC 000 EG BD SP 3005 6 A0 IPS-E-

CE-360

NIOEC-SP-30-05

NIOEC SPECIFICATION FORPLUMBING PIPING FOR BUILDING


9


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

HEATING,VENTILATING,AIR CONDITIONING

NIOEC 000 EG AR SP 3003 4 A0

IPS-E-AR-100, 120,130,160, IPS-M-AR-105, 125,130, 205,215, 225,235, 245

NIOEC-SP-30-03

NIOEC SPECIFICATION FORHEATING, VENTILATING, AIR CONDITIONING AND PRESSURIZING

NIOEC 000 EG AR SP 3006 5 A0

IPS-C-AR-110

NIOEC-SP-30-06

NIOEC SPECIFICATION FORINSTALLATION OF HEATING, VENTILATING, AIR-CONDITIONING REFRIGERATING AND PRESSURIZING EQUIPMENT


10

VOLUME 3

BOOK 1 OF 2 FIXED EQUIPMENT


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

TANKS AND VESSELS

NIOEC 000 EG ME SP 4101 15 A1 - NIOEC-SP-41-01

NIOEC SPECIFICATION FORSTORAGE TANKS FIELD ERECTED

NIOEC 000 EG ME SP 4102 3 A0 IPS-C, E & M-ME-120

NIOEC-SP-41-02

NIOEC SPECIFICATION FOR AVIATION TURBINE FUEL STORAGE TANKS


NIOEC SPECIFICATION FORPRESSURE VESSELS


NIOEC SPECIFICATION FOR HEAVY WALL PRESSURE VESSELS


NIOEC SPECIFICATION FORTOWER INTERNAL AND VESSEL TRAYS


NIOEC-SP-41-06

NIOEC SPECIFICATION FORLARGE WELDED LOW PRESSURE STORAGE TANKS


NIOEC-SP-41-07

NIOEC SPECIFICATION FOR PRESSURE STORAGE SPHERES(LPG)

THERMAL


NIOEC SPECIFICATION FORSHELL AND TUBE HEAT EXCHANGERS


NIOEC SPECIFICATION FORAIR COOLED HEAT EXCHANGERS


NIOEC SPECIFICATION FORDOUBLE PIPE HEAT EXCHANGERS


NIOEC SPECIFICATIONFOR HIGH PRESSURE, HIGH TEMPERATURE HEAT EXCHANGERS


NIOEC SPECIFICATION FOR FIELD ERECTED WATER-TUBE BOILERS


NIOEC SPECIFICATION FORFIRED HEATERS


11


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

NIOEC 000 EG ME SP 4504 8 A0 IPS-M- ME-206

NIOEC-SP-45-04

NIOEC SPECIFICATION FOR STEAM METHANE REFORMER FURNACE

NIOEC 000 EG TP SP 4507 5 A0 IPS-E-TP-350

NIOEC-SP-45-07

NIOEC SPECIFICATION FORREFRACTORY LINNINGS

NIOEC 000 EG ME SP 4509 9 A0 IPS-G-ME-253

NIOEC-SP-45-09

NIOEC SPECIFICATION FOR INCINERATOR

NIOEC 000 EG TP SP 4514 8 A0 IPS-C-TP-352

NIOEC-SP-45-14

NIOEC SPECIFICATION FORPROCEDURE FOR REFRACTORY LINING


12

VOLUME 3

BOOK 2 OF 2 MACHINARY & MISCELLANEOUS


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

MACHINARY

NIOEC 000 EG PM SP 4001 7 A0 IPS-E-PM-100

NIOEC-SP-40-01

NIOEC SPECIFICATION FORGENERAL DESIGN REQUIREMENTS OF MACHINERIES

NIOEC 000 EG PM SP 4003 9 A0 - NIOEC-SP-40-03

NIOEC SPECIFICATION FORSPARE PARTS REQUIREMENT


NIOEC SPECIFICATION FORLUBRICATING, SEALING AND CONTROLLING OIL


NIOEC SPECIFICATION FORLOW PRESSURE MULTI-STAGE CENTRIFUGAL AIR BLOWER


NIOEC SPECIFICATION FOREMERGENCY DIESEL GENERATOR


NIOEC SPECIFICATION FOR GAS TURBINE GENERATORS


NIOEC SPECIFICATION FORCENTRIFUGAL FANS

NIOEC 000 EG PM SP 4315 4 A0 IPS-M-PM-220

NIOEC-SP-43-15

NIOEC SPECIFICATION FORPOSITIVE DISPLACEMENT COMPRESSORS ROTARY


NIOEC SPECIFICATION FORPUMPS,DRIVERS AND AUXILIARY EQUIPMENT


NIOEC SPECIFICATION FORCENTRIFUGAL PUMPS FOR GENERAL REFINERY SERVICES


NIOEC SPECIFICATION FOR GENERAL PURPOSE STEAM TURBINES


NIOEC SPECIFICATION FORRECIPROCATING PUMP


NIOEC SPECIFICATION FORROTARY PUMPS FOR GENERAL REFINERY SERVICES


NIOEC SPECIFICATION FORMETERING PUMPS


13


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title


NIOEC SPECIFICATION FORSPECIAL PURPOSE FOR STEAM TURBINES


NIOEC SPECIFICATION FOR LUBRICATION, SHAFT SEALING, CONTROL OIL SYSTEM FOR SPECIAL PURPOSE APPLICATION


NIOEC SPECIFICATION FOR CENTRIFUGAL COMPRESSORS IN GENERAL REFINERY SERVICES


NIOEC SPECIFICATION FORRECIPROCATING COMPRESSORS FOR GENERAL REFINERY SERVICES


NIOEC SPECIFICATION FORCENTRIFUGAL PLANT AND INSTRUMENT AIR COMPRESSOR PACKAGES


NIOEC-SP-46-12

NIOEC SPECIFICATION FORCENTRIFUGAL PUMPS FOR GENERAL SERVICES


NIOEC SPECIFICATION FORCENTRIFUGAL SUMP PUMPS


NIOEC SPECIFICATION FORFIRE WATER PUMPS


NIOEC-SP-46-17

NIOEC SPECIFICATION FORMECHANICAL AGITATORS (MIXERS)

MISCELLANEOUS


NIOEC SPECIFICATION FOR STEAM JET EJECTORS


NIOEC-SP-47-04

NIOEC SPECIFICATION FOR FLARES AND FLARE STACK


NIOEC SPECIFICATION FORFEEDWATER DEARATOR


NIOEC SPECIFICATION FORELECTRICAL CRUDE DESALTING UNITS


NIOEC SPECIFICATION FORCHEMICAL FEED SYSTEM


NIOEC-SP-47-08

NIOEC SPECIFICATION FOR WATER COOLING TOWERS


14

Document No. NIOEC Specifications Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title


NIOEC SPECIFICATION FORPACKAGED EQUIPMENT


NIOEC SPECIFICATION FORCONDENSATE OIL REMOVAL SYSTEM


NIOEC SPECIFICATION FORCONDENSATE POLISHING SYSTEM


NIOEC SPECIFICATION FORSILENCERS


NIOEC SPECIFICATION FORHAND-OPERATED, SINGLE GIRDER BRIDGE CRANES AND HAND-OPERATED HOIST DEVICE


15

VOLUME 4

BOOK 1 OF 1 PIPING


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

PIPING

NIOEC 000 EG PI SP 5001 11 A1 IPS-E-PI-240

NIOEC-SP-50-01

NIOEC SPECIFICATION FORGENERAL PIPING, PROCESS AND UTILITY DESIGN EQUIPMENT LAYOUT AND DRAWING PROCEDURE

NIOEC 000 EG PI SP 5002 10 A0 IPS-C-PI-240

NIOEC-SP-50-02

NIOEC SPECIFICATION FORGENERAL PIPING PROCESS AND UTILITY FABRICATION AND FIELD INSTALLATION

NIOEC 000 EG PI SP 5004 600 A0 - NIOEC-SP-50-04

NIOEC SPECIFICATION FORPIPING MATERIAL


NIOEC SPECIFICATION FORFIELD PRESSURE TESTING

NIOEC 000 EG PI SP 5007 2 A0 IPS-C-PI-410

NIOEC-SP-50-07

NIOEC SPECIFICATION FORCLEANING AND PROTECTION OF PIPING

NIOEC 000 EG PI SP 5008 5 A0 IPS-E-PR-420

NIOEC-SP-50-08

NIOEC SPECIFICATION FORWINTERIZING & HEAT CONSERVATION


NIOEC SPECIFICATION FORPIPING MATERIAL PURCHASE PIPE

NIOEC 000 EG PI SP 5010 7 A0 IPS-M-PI-150

NIOEC-SP-50-10

NIOEC SPECIFICATION FORPIPING MATERIAL PURCHASE FLANGES


NIOEC SPECIFICATION FORPIPING MATERIAL PURCHASE FITTING

NIOEC 000 EG PI SP 5018 5 A0 IPS-M-PI-110

NIOEC-SP-50-18

NIOEC SPECIFICATION FORPIPING MATERIAL PURCHASE VALVES

NIOEC 000 EG PI SP 5022 3 A0 IPS-E-PI-200

NIOEC-SP-50-22

NIOEC SPECIFICATION FORPIPING FLEXIBILITY ANALYSIS

NIOEC 000 EG PI SP 5023 5 A0 IPS-G-PI-280

NIOEC-SP-50-23

NIOEC SPECIFICATION FORPIPE SUPPORT ELEMENT

NIOEC 000 EG PI SP 5026 4 A0 IPS-G-PI-230

NIOEC-SP-50-26

NIOEC SPECIFICATION FORSTRAINERS & FILTERS


NIOEC SPECIFICATION FORIDENTIFICATION OF PIPING MATERIAL


16

VOLUME 5

BOOK 1 OF 1 ELECTRICAL,INSTRUMENTATION& TELECOM.


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

ELECTRICAL

NIOEC 000 EG EL SP 6000 25 A0 - NIOEC-SP-60-00

NIOEC SPECIFICATION FOR GENERAL DESIGN PHILOSOPHY FOR ELECTRICAL SYSTEM


NIOEC SPECIFICATION FORSEALED TYPE POWER TRANSFORMERS

NIOEC 000 EG EL SP 6002 3 A0 IPS-M-EL-131

NIOEC-SP-60-02

NIOEC SPECIFICATION FORLOW VOLTAGE INDUCTION MOTORS


NIOEC-SP-60-03

NIOEC SPECIFICATION FORDRY TYPE POWER TRANSFORMERS BELOW 500 KVA


NIOEC-SP-60-04

NIOEC SPECIFICATION FORLOW VOLTAGE SWITHGEAR AND CONTROLGEAR


NIOEC SPECIFICATION FORMEDIUM & HIGH VOLTAGE POWER CABLES


NIOEC SPECIFICATION FORELECTRICAL SYSTEM INSTALLATION


NIOEC SPECIFICATION FORAIRCRAFT WARNING LIGHTS


NIOEC SPECIFICATION FORCURRENT LIMITING REACTORS


NIOEC-SP-60-09

NIOEC SPECIFICATION FORMEDIUM AND HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR


NIOEC-SP-60-10

NIOEC SPECIFICATION FORCONSERVATOR TYPE TRANSFORMERS


NIOEC SPECIFICATION FORNEUTRAL EARTHING RESISTORS


NIOEC SPECIFICATION FORPOWER MANAGEMENT SYSTEM


17


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title


NIOEC SPECIFICATION FORSTANDBY BATTERY AND BATTERY CHARGER


NIOEC SPECIFICATION FOR VARIABLE SPEED DRIVERS(VSD)


NIOEC SPECIFICATION FORUNINTERRUPTIBLE POWER SUPPLY(UPS)


NIOEC SPECIFICATION FORLOW VOLTAGE CABLE AND WIRES


NIOEC SPECIFICATION FOR6KV CAPACITOR BANK


NIOEC SPECIFICATION FORLOW VOLTAGE CAPACITOR BANK


NIOEC SPECIFICATION FORELECTRICAL HEAT TRACING


NIOEC-SP-60-20

NIOEC SPECIFICATION FORMEDIUM AND HIGH VOLTAGE INDUCTION MOTORS


NIOEC SPECIFICATION FOR TURBINE DRIVEN SYNCHRONOUS GENERATORS


NIOEC SPECIFICATION FOR CATHODIC PROTECTION SYSTEM


NIOEC SPECIFICATION FORELECTRICAL ALARM PANEL


NIOEC SPECIFICATION FORELECTRICAL REQUIREMENTS FOR BUILDINGS


NIOEC SPECIFICATION FORLOW VOLTAGE BUS DUCT


NIOEC-SP-60-28

NIOEC SPECIFICATION FORSUBMARINE CABLES


NIOEC SPECIFICATION FORELECTRICAL BULK MATERIAL


NIOEC SPECIFICATION FORFIRE ALARM SYSTEM


NIOEC SPECIFICATION FORINDUSTRIAL LIGHTING


NIOEC SPECIFICATION FORLIGHTING EQUIPMENT


18


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title


NIOEC SPECIFICATION FORELECTRICAL COMPONENTS OF PACKAGE UNITS


NIOEC SPECIFICATION FORLIGHTING/SMALL POWER PANELS

INSTRUMENTATION

NIOEC 000 EG IN SP 7001 50 A3 - NIOEC-SP-70-01

NIOEC SPECIFICATION FOR INSTRUMENTATION


NIOEC SPECIFICATION FORINSTRUMENT INSTALLATION


NIOEC SPECIFICATION FORINSTRUMENT INSTALLATION MATERIAL


NIOEC SPECIFICATION FORELECTRICAL MOTOR OPERATED VALVES


NIOEC SPECIFICATION FORINSTRUMENTATION CONTROL CABLES, CABLE TRAYS, CONDUITS, JUNCTION BOXES AND CABLE GLANDS


NIOEC SPECIFICATION FORBIDIRECTIONAL METER PROVERS


NIOEC SPECIFICATION FORINSTRUMENT AND CONTROL SYSTEM CALIBRATION, INSPECTION AND TESTS


NIOEC SPECIFICATION FORPROCESS CONTROL SYSTEM(PCS)


NIOEC SPECIFICATION FORLOGIC SYSTEMS

NIOEC 000 EG IN SP 7010 8 A0 IPS-G-IN-300

NIOEC-SP-70-10

NIOEC SPECIFICATION FORTANK GAUGING EQUIPMENT


NIOEC-SP-70-11

NIOEC SPECIFICATION FOR INSTRUMENTS OF FIRE FIGHTING AND DETECTION EQUIPMENT

NIOEC 000 EG IN SP 7012 4 A0 IPS-M-IN-240

NIOEC-SP-70-12

NIOEC SPECIFICATION FOR VOLUMETRIC LIQUID MEASRMENT METHODS


19


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title


NIOEC SPECIFICATION FORELECTRICAL POWER SUPPLY AND DISTRIBUTION SYSTEMS


NIOEC-SP-70-14

NIOEC SPECIFICATION FORCONTROL PANELS AND SYSTEM CABINETS


NIOEC-SP-70-15

NIOEC SPECIFICATION FORCONTROL CENTERS


NIOEC-SP-70-16

NIOEC SPECIFICATION FORGENERAL INSTRUMENT. FACTORY INSPECTION AND TESTING OF INSTRUMENTS AND INSTRUMENT SYSTEM


NIOEC-SP-70-17

NIOEC SPECIFICATION FORINSTRUMENT PROTECTION


NIOEC SPECIFICATION FORPIPELINE INSTRUMENT.


NIOEC SPECIFICATION FORMISCELLANEOUS INSTRUMENT


NIOEC SPECIFICATION FORPIPELINE AUTOMATIC LEAK DETECTION SYSTEM


NIOEC SPECIFICATION FORPROGRAMMABLE LOGIC CONTROLLERS

TELECOMMUNICATION

NIOEC 000 EG TC SP 7050 7 A0 - NIOEC-SP-70-50

NIOEC SPECIFICATION FORPABX TELEPHONE SYSTEM


NIOEC SPECIFICATION FORFIRE TELEPHONE SYSTEM


NIOEC SPECIFICATION FORINTRA-PLANT COMMUNICATION SYSTEM


NIOEC SPECIFICATION FORRADIO COMMUNICATION SYSTEM


NIOEC SPECIFICATION FORTELECOMMUNICATION CABLES


NIOEC SPECIFICATION FORCLOSED CIRCUIT TELEVISION SYSTEM (CCTV)


20

VOLUME 6

BOOK 1 OF 2 TECHNICAL PROTECTION


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

TECHNICAL PROTECTION

NIOEC 000 EG TP SP 5017 23 A0 -

NIOEC-SP-50-17

NIOEC SPECIFICATION FORPROTECTION OF UNDERGROUND STEEL PIPE

NIOEC 000 EG TP SP 8001 47 A0 - NIOEC-SP-80-01

NIOEC SPECIFICATION FORINSULATION


NIOEC SPECIFICATION FORPAINTING


NIOEC SPECIFICATION FORHEAT TRANSFER CEMENT

NIOEC 000 EG TP SP 8004 3 A0 IPS-E-TP-760

NIOEC-SP-80-04

NIOEC SPECIFICATION FORCORROSIVE CONSIDERATION IN DESIGN

NIOEC 000 EG TP SP 8005 8 A0

IPS-C-TP-352 &IPS-E-TP-350

NIOEC-SP-80-05

NIOEC SPECIFICATION FORINTERNAL LINING


NIOEC SPECIFICATION FORWELDING SHOP AND/OR FIELD FABRICATED PIPING


NIOEC SPECIFICATION FORWELDING NON-CODE SPECIALTY EQUIPMENT


21

VOLUME 6

BOOK 2 OF 2 SAFETY & GENERAL


Plan / Proj.


Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

SAFETY

NIOEC 000 EG SF SP 4710 5 A0 IPS-G-SF-900

NIOEC-SP-47-10

NIOEC SPECIFICATION FORNOISE CONTROL AND VIBRATION

NIOEC 000 EG SF SP 4727 13 A1 - NIOEC-SP-47-27

NIOEC SPECIFICATION FORFIRE FIGHTING EQUIPMENT AND FACILITY

NIOEC 000 EG SF SP 4728 4 A1 IPS-E-SF-220

NIOEC-SP-47-28

NIOEC SPECIFICATION FORFIRE WATER DISTRIBUTION & STORAGE FACILITIES


NIOEC-SP-47-30

NIOEC SPECIFICATION FORFOAM GENERATING AND PROPORTUINING SYSTEM


NIOEC-SP-47-32

NIOEC SPECIFICATION FORCO2 FIRE EXTINGUISHING SYSTEM

NIOEC 000 EG SF SP 4734 3 A0 IPS-G-SF-126

NIOEC-SP-47-34

NIOEC SPECIFICATION FORFIRE EXTINGUISHERS


NIOEC-SP-47-36

NIOEC SPECIFICATION FORFIRE FIGHTING SPRINKLER SYSTEMS

NIOEC 000 EG SF SP 4737 4 A1

IPS-G-SF-860 &IPS-E-SF-860

NIOEC-SP-47-37

NIOEC SPECIFICATION FORAIR POLLUTION CONTROL

NIOEC 000 EG SF SP 4738 4 A1

IPS-G-SF-880 &IPS-E-SF-880

NIOEC-SP-47-38

NIOEC SPECIFICATION FORWATER POLLUTION CONTROL


22

GENERAL



Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

NIOEC 000 EG GN SP 9000 69 A3 - NIOEC-SP-90-00

NIOEC SPECIFICATION FORGENERAL INDEX

NIOEC 000 EG GN SP 9052 4 A0 IPS-G-GN-210

NIOEC-SP-90-52

NIOEC SPECIFICATION FORPACKING AND PACKAGES

NIOEC 000 EG GN SP 9053 15 A1 - NIOEC-SP-90-53

NIOEC SPECIFICATION FORDRAFTING

NIOEC 000 EG GN SP 9074 3 A0 IPS-M-GN-170

NIOEC-SP-90-74

NIOEC SPECIFICATION FORLABORATORY GLASSWARE & RELATED APPARATUS


NIOEC-SP-90-75

NIOEC SPECIFICATION FORFORK LIFT TRUCKS


NIOEC-SP-90-76

NIOEC SPECIFICATION FORCONVEYORS


NIOEC-SP-90-77

NIOEC SPECIFICATION FORMOBILE CRANES-POWER DRIVEN


NIOEC-SP-90-78

NIOEC SPECIFICATION FORGANTRY AND OVERHEAD CRANES


23

VOLUME 7

BOOK 1 OF 1 PIPE LINE



Type Serial

No. No. of Pages

Rev. No.

IPS No.

Reference No. Title

PIPE LINE

NIOEC 000 EG PL SP 5050 16 A0 - NIOEC-SP-50-50

NIOEC SPECIFICATION FORDESIGN CRITERIA

NIOEC 000 EG PL SP 5051 3 A0 IPS-M-PI-190

NIOEC-SP-50-51

NIOEC SPECIFICATION FORLINE PIPE


NIOEC-SP-50-52

NIOEC SPECIFICATION FORPIPELINE VALVES


NIOEC SPECIFICATION FORANCHOR FLANGE


NIOEC-SP-50-54

NIOEC SPECIFICATION FORPIG LUNCHING & RECEIVING TRAP


NIOEC-SP-50-55

NIOEC SPECIFICATION FORPIGS

NIOEC 000 EG PL SP 5056 4 A0 IPS-M-TP-318

NIOEC-SP-50-56

NIOEC SPECIFICATION FORSHRINKLABLE SLEEVES

NIOEC 000 EG PL SP 5057 5 A0 IPS-M-TP-750

NIOEC-SP-50-57

NIOEC SPECIFICATION FOR ISOLATING FLANGE&JOINT

NIOEC 000 EG PL SP 5058 6 A0 IPS-G-PI-230

NIOEC-SP-50-58

NIOEC SPECIFICATION FORSTRAINERS & FILTERS


NIOEC SPECIFICATION FOREXPANSION JOINT


NIOEC SPECIFICATION FORHOT (INDUCTION) BEND

NIOEC 000 EG PL SP 5061 3 A0 IPS-C-PI-140

NIOEC-SP-50-61

NIOEC SPECIFICATION FORCONSTRUCTION OF TRANSPORTATION PIPELINES(ONSHORE)


NIOEC-SP-50-62

NIOEC SPECIFICATION FORTRANSPORTATION PIPELINES(ONSHORE) PRESSURE TESTING

NIOEC 000 EG PL SP 5063 4 A0 IPS-E-PI-140

NIOEC-SP-50-63

NIOEC SPECIFICATION FORPIPELINES ENGINEERING


NIOEC SPECIFICATION FORGAS TURBINE & DRIVEN PUMPS PACKAGE


NIOEC SPECIFICATION FOR ELECTRICAL DRIVEN PUMP

NIOEC 000 EG PL SP 8051 5 A0 IPS-G-TP-335

NIOEC-SP-80-51

NIOEC SPECIFICATION FOR3 LAYERS POLYETHYLENE COATING SYSTEM


NIOEC-SP-90-51

NIOEC SPECIFICATION FORWELDING OF TRANSPORTATION PIPELINE


24

VOLUME 8

BOOK 1 OF 2 NIOEC STANDARD DRAWINGS

Document No. NIOEC Standard Drawings

Plan/ Proj.

Unit Code Phase Discip. Doc.

Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

PROCESSS

NIOEC 000 EG PR SD 0001 1 A1 NIOEC-SD-0001-1/1-A1

PFD,SYMBOLS AND LEGENDS


P&I Ds, SYMBOLS AND LEGENDS (PIPING)


P&I Ds, SYMBOLS AND LEGENDS (INSTRUMENT)


P&I Ds, SYMBOLS AND LEGENDS (INSTRUMENT)


P&I Ds, SYMBOLS AND LEGENDS (MISCELLANEOUS EQUIPMENT)


P&I Ds, ABBREVIATION


P&I Ds, TYPICAL FURNACE F0/FG FIRING ARRANGMENT


P&I Ds, TYPICAL FURNACE FUEL GAS FIRING ARRANGMENT


P&I Ds, SAMPLE CONECTIONS

9 TOTAL OF PROCESS DWGS.


25


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

CONCRETE

NIOEC 000 EG CE SD 1000 1 A1 NIOEC-SD-1000-1/7-A4

INSTRUCTIONS FOR ANCHOR BOLT USE


INSTRUCTIONS FOR ANCHOR BOLT USE


TYPE"'T" ANCHOR BOLT


TYPE"'S" ANCHOR BOLT


TYPE"'U" ANCHOR BOLT


TYPE"'B" ANCHOR BOLT


TYPE"'W" ANCHOR BOLT


SLIDING PLATE TYPE "A" & "B" FOR SINGLE HORIZONTAL EQUIPMENT


SLIDING PLATE TYPE "C" FOR STACKED HORIZONTAL EQUIPMENT

NIOEC 000 EG CE SD 1002 1 A1

NIOEC-SD-1002-1/4-A4

REINFORCED CONCRETE WORKS FIREPROOFING DETAILS FOR STEEL STRUCTURES


REINFORCED CONCRETE WORKS FIREPROOFING DETAILS: VERTICAL TANKS



REINFORCED CONCRETE WORKS FIREPROOFING DETAILS: HORIZONTAL EQUIPMENT



REINFORCED CONCRETE WORKS FIREPROOFING DETAILS: PARTICULAR NOTES


REINFORCED CONCRETE WORKS SLEEPERS TYPE "1" AND "2"


REINFORCED CONCRETE WORKS STEEL PLATE ON R.C. WORKS


REINFORCED CONCRETE WORKS STEEL PLATE ON R.C. WORKS


CONCRETE PAVING DETAILS AND JOINTS


UNDERGROUND SYSTEM CATCH BASINS AND DRY BOXES


UNDERGROUND SYSTEM MANHOLES


26

Document No. NIOEC Standard Drawings Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


UNDERGROUND SYSTEM SEALED MANHOLES


UNDERGROUND SYSTEM SANITARY PITS


UNDERGROUND SYSTEM SINGLE VALVE PITS


UNDERGROUND SYSTEM FIRE HYDRANT AND MONITOR MANHOLE


UNDERGROUND SYSTEM VENT PIPE FOR SEWERS


UNDERGROUN SYSTEM PIPE DRAINS AND RISERS


UNDERGROUND SYSTEM GRILLED DRAINING TRENCH AND CLEAN OUT


NIOEC-SD-1006-10/10-A3

UNDERGROUN SYSTEM SIPHON PIPE SEAL, HOLES REINFORCEMENT & LADDER RUNGS



UNDERGROUND SYSTEMS GENERAL NOTES-ABBREVIATIONS AND SYMBOLS



UNDERGROUND SYSTEM ELECTRICAL CABLES INSTALLATION CABLES TRENCH FOR UNPAVED AREA



UNDERGROUND SYSTEM ELECTRICAL AND INSTRUMENT CABLES INSTALLTION CABLES TRENCH FOR UNPAVED AREA



UNDERGROUND SYSTEM ELECTRICAL CABLES UNSTALLATION CABLES TRENCH FOR PAVED AREA



UNDERGROUND SYSTEM ELECTRICAL AND INSTRUMENT CABLES INSTALLATION CABLES IN CONDUCTS FOR ROAD CROSSING



UNDERGROUND SYSTEM ELECTRICAL CABLES INSTALLATION CABLES TRENCH FOR UNPAVED AREA


27


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title



UNDERGROUND SYSTEM ELECTRICAL CABLES UNSTALLATION CABLES TRENCH FOR PAVED AREA


REINFORCED CONCRETE WORKS FOUNDATIONS FOR LADDERS & STAIRS


REINFORCED CONCRETE WORKS FOUNDATION FOR LIGHTING POLE TYPE “B”


BUND WALLS, STEPS & PIPE SLEEVES


BUND WALLS, STEPS & PIPE SLEEVE


GENERAL NOTES FOR BUND WALLS, STEPS & PIPE SLEEVE


TYPICAL DITCH CROSS – SECTIONS


FOOTPATH CROSSING OVER STD. MINOR NULLAHS


FOOTPATH CROSSING OVER MAJOR & DEEP NULLAHS


TYPICAL CROSS SECTION FOR ASPHALT CONCRETE PAVINGS


ARCHITECTURAL DETAILS OF A BUILDING LEGEND OF SECTIONAL REFERENCES


PARAPET WALL DETAILS WITH R.C. LINTEL AND CANOPY


DETAILS FOR SINK, W.H.BASIN, W.C., BATH TUB AND SHOWER TRAY


DETAILS FOR SINK, W.H.BASIN, W.C., BATH TUB AND SHOWER TRAY



CHIMNEY AT THE MIDDLE OF WALL WITH CONC. COPING SECTIONAL DETAILS



CHIMNEY AT THE CORNER OF WALL WITH TRAVERTINE COPING SECTIONAL DETAILS


FALSE CEILING DETAILS


FALSE CEILING DETAILS


28


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title



CORRUGATED M.S. GALVANIZED SHEETING CONNECTION DETAILS FOR ROOFS AND WALLS


WINDOW SILLS


ROOF DRAIN DETAILS


ROOF DRAIN DETAILS


A.C. UNIT INSTALLATION DETAILS


FLOOR SLAB, WALL BASE AND FOUNDATION


FLOOR SLAB, WALL BASE AND FOUNDATION


EXPANSION JOINTS


FENCE DETAIL


GATE DETAIL


SANDBIN DETAILS


CIVIL WORKS REINFORCED CONCRETE WORKS PRECAST BLOCK


CIVIL WORKS GEOMEMBRANE TYPICAL CONNECTION


30 m³ ELEVATED WATER TANK FOUNDATION PLAN SECTION & ELEVATION



30 m³ ELEVATED WATER ELEVATION, PLAN AT PLARFORM LEVEL & DETAILS


30 m³ ELEVATED WATER TANK SECTION & DETAILS


30 m³ ELEVATED WATER TANK SECTION & DETAILS


TYPICAL SEPTIC TANK


BRANCH DISCHARGE PIPES TO RANGES OF APPLIANCES


BRANCH DISCHARGE PIPES TO RANGES OF APPLIANCES


CLASSIFICATION OF SANITARY DRAIN SYSTEMS




29



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title




DISCHARGE STACK AND BRANCH CONNECTIONS


DISCHARGE STACK AND BRANCH CONNECTIONS


VENTILATING STACKS AND VENTILATION PIPES


REINFORCED CONCRETE WORKS GENERAL NOTES

79 TOTAL OF CONCRETE DWGS.


30


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

STEEL

STRUCTURE


STEEL STRUCTURES STAIR TYPE A


STEEL STRUCTRUES STAIRS TYPE B

NIOEC 000 EG CE SD 2000 3 A1 NIOEC-SD-2000-3/13 -A4

STEEL STRUCTURES STAIRS: DETAILS 1 TO 5


STEEL STRUCTURES STAIRS: DETAIL 6 TO 9


STEEL STRUCTURES STAIRS: DETAIL 10 TO 13


STEEL STRUCTURES STAIRS: DETAILS 14 TO 16


STEEL STRUCTURE REMOVABLE RAILING


STEEL STRUCTURES FIXED RAILING


STEEL STRUCTURES RAILING DETAILS 1 TO 6


STEEL STRUCTURES RAILING DETAILS 7 TO 12


STEEL STRUCTURES RAILING DETAILS 13 AND 14


STEEL STRUCTURES STAIRS RAILING


STEEL STRUCTURES STAIR RAILING


STEEL STRUCTURES LADDER WITH FRONTAL ACCESS


STEEL STRUCTURES LADDER WITH LATERAL ACCESS


STEEL STRUCTURES LADDER DETAILS 1 TO 3


STEEL STRUCTURES LADDER DETAILS 4 TO 7



STRUCTURAL STEEL WORKS TYPICAL DETAILS SHEAR CONNECTION OF BEAMS


31


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


STANDARD DETAIL- FOR BEAM TO BEAM CONNECTION 1/2 (SLENDER H SHAPE AND CHANNEL)


STANDARD DETAILS- FOR BEAM TO BEAM CONNECTION 2/2 (MIDDLE H SHAPE)


STANDARD DETAILS COLUMN BASE AND BRACING CONNECTION


STANDARD DETAILS FOR MOMENT CONNECTION WITH END PLATE


INDUSTRIAL PLATFORM & STAIRS TYPICAL DETAILS






STEEL STRUCTURES TOE PLATES FOR FLOOR OPENING


STRUCTURAL STEEL WORKS GENERAL NOTES- ABBREVIATIONS AND SYMBOLS

27 TOTAL OF STEEL STRUCTURE DWGS.


32


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

TANKS & VESSELS

NIOEC 000 EG ME SD 4001 1 A1 NIOEC-SD-4001-1/1-A3

STANDARD PLATFORM


LARGE SIZE STANDARD PLATFORM


PLATFORM FOR HORIZONTAL VESSEL


PIPE HOLE AND PIPE SUPPORT LUG


DETAIL OF PLATFORM PASSEGE


PLATE SIDE RAIL LADDERS WITH CAGE TYPE I


PLATE SIDE RAIL LADDERS WITH CAGE TYPE II


PLATE SIDE RAIL LADDERS WITH CAGE TYPE III


PLATE SIDE RAIL LADDERS WITH CAGE TYPE IV


PLATE SIDE RAIL LADDERS WITH CAGE TYPE V-IX


BAFFLE FOR COLUMN AND DRUM


INTERNAL FLANGE FOR COLUMN AND DRUM


WIRE MESH BLANKET SUPPORT TYPE "I"


WIRE MESH BLANKET SUPPORT TYPE "II"


WIRE MESH BLANKET SUPPORT TYPE "III"


WIRE MESH BLANKET SUPPORT TYPE "IV"


STANDARD WIRE MESH BLANKET SUPPORT TYPE "V"


STANDARD WIRE MESH BLANKET SUPPORT TYPE "VI"


STANDARD WIRE MESH BLANKET SUPPORT TYPE "VII"


STANDARD WIRE MESH BLANKET SUPPORT TYPE "VIII"


FLASH GUIDE (WELDED TYPE)


SUPPORT RING FOR HOT INSULATION


COLUMN DAVIT


LIFTING LUG


33



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


EARTH LUG


FIREPROOFING TIE WIRE NUT


NAME PLATE FOR VESSEL


SKIRT AND BASE PLATE FOR VERTICAL VESSELS


SADDLE FOR HORIZONTAL DRUM TYPE VHA


SADDLE FOR HORIZONTAL DRUM TYPE "VHB"


SADDLE FOR HORIZONTAL DRUM TYPE VHC


SADDLE FOR HORIZONTAL DRUM TYPE "VHD"


SADDLE FOR HORIZONTAL DRUM TYPE "VHE"


SADDLE FOR HORIZONTAL DRUM TYPE "VLA"


SADDLE FOR HORIZONTAL DRUM TYPE "VLB"


SADDLE FOR HORIZONTAL DRUM TYPE "VLC"


FINISHING OF CONTACT FACES OF FLOATING TUBE SHEET AND BACKING DEVICE


SEAL STRIP AND SLIDING SHOE


FLEXT-SEAL LONGITUDINAL BAFFLE FOR HEAT EXCHANGERS


BAR STOCK PLUG


LIFTING LUGS FOR HEAT EXCHANGERS


NAMEPLATE FOR HEAT EXCHANGERS


SADDLE FOR HEAT EXCHANGER TYPE “HEA”(8B-ID450)


SADDLE FOR HEAT EXCHANGER TYPE “HEB”


SADDLE FOR HEAT EXCHANGER TYPE “HEC”


SADDLE FOR HEAT EXCHANGER TYPE “HED”


STANDARD INTERNAL LADDER RUNGS FOR COLUMNS & VESSELS


HINGE AND DAVIT DETAILS FOR MANHOLES


VORTEX BREAKER DETAIL


34



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


ALLOY CLAD&OVERLAY WELDING DETAILS FOR NOZZLES,SHELL&HEAD JOINTS


MIST ELIMINATOR DETAILS


TOWER ATTACHMENTS AND TOLERANCES. NON MOVABLE PARTS


TOLERANCES &SPECIFICATIONS FOR "CARTRIDGE"TRAYS


TOWER ATTACHMENTS


SKIRT


SUPPORT LEGS


SUPPORT SADDLES


SUPPORT SADDLES FOR STACKED UNITS


SUPPORT BRACKETS

59 TOTAL OF MECHANICAL DWGS.


35



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

PIPING

NIOEC 000 EG PI SD 5001 1 A1 NIOEC-SD-5001-1/1-A1

STEAM TRACING DETAILS PIPING 4’’ & SMALLER


STEAM TRAP & DRIP POT PIPING


UTILITY STATION, EMERGENCY SHOWERS & SAMPLE COOLING DETAILS


TYPICAL UNIT PLOT ARRANGEMENT PIPEWAY LAYOUT


STANDARD PIPE SUPPORT


STANDARD PIPE SUPPORT INDEX








S01 U-BOLT


S02 SLIDE STRAP


S03 TIGHT STRAP


S04 SLIDE U-BAND FOR VIBRANT PIPING


S05 TIGHT U-BAND FOR VIBRANT PIPING


S06 SLIDE SHOE 1/2’’-14’’ (CS WITHOUT PWHT)


S06 SLIDE SHOE 16’’-28’’ (CS WITHOUT PWHT)


S06 SLIDE SHOE 30’’-36’’ (CS WITHOUT PWHT)


S07 SLIDE SHOE 1/2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)

NIOEC 000 EG PI SD 5006 15 A1 NIOEC-SD-5006-15/92-

A3

S07 SLIDE SHOE 16’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


36



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

S08 GUIDE SHOE FOR HORIZONTAL PIPE 1/2’’-14’’ (CS-WITHOUT PWHT)


A3

S08 GUIDE SHOE FOR HORIZONTAL PIPE 16’’-28’’ (CS-WITHOUT PWHT)


A3

S08 GUIDE SHOE FOR HORIZONTAL PIPE 18’’-36’’ (CS-WITHOUT PWHT)


A3

S09 GUIDE SHOE FOR HORIZONTAL PIPE 1/2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S09 GUIDE SHOE FOR HORIZONTAL PIPE 16’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S10 GUIDE SHOE FOR HORIZONTAL PIPE 1/2’’-2’’ (CS-WITHOUT PHWT)


A3

S10 GUIDE SHOE FOR HORIZONTAL PIPE 3’’-14’’ (CS-WITHOUT PHWT)


A3

S11 GUIDE SHOE FOR VERTICAL PIPE 1/2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S11 GUIDE SHOE FOR HORIZONTAL PIPE 3’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S12 STOPPED SHOE 1/2’’-14’’(CS WITHOUT PWHT )


A3

S12 STOPPED SHOE 16’’-28’’(CS WITHOUT PWHT )


A3

S12 STOPPED SHOE 30’’-36’’(CS WITHOUT PWHT )


A3

S13 STOPPED SHOE 1/2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S13 STOPPED SHOE 16’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S14 GUIDE SHOE 1/2’’-14’’ (CS-WITHOUT PWHT)


A3

S14 GUIDE STOPPED SHOE 16’’-28’’ (CS-WITHOUT PWHT)


A3

S14 GUIDE STOPPED SHOE 30’’-36’’ (CS-WITHOUT PWHT)


A3

S15 GUIDE STOPPED SHOE 1/2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


37



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

S15 GUIDE STOPPED SHOE 16’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S16 TIGHT SHOE 1/2’’-14’’ (CS-WITHOUT PWHT)


A3

S17 TIGHT SHOE 1/2’’-14’’ (CS-PWHT , ALLOY, STAINLESS S)


A3

S18 GUIDE FOR HORIZONTAL BARE PIPE


A3

S19 STOPPED FOR HORIZONTAL BARE PIPE 1/2’’-28’’ (CS-WITHOUT PWHT)


A3

S21 STOPPED FOR HORIZONTAL BARE PIPE 1/2’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S21 STOPPED WITH STRAP FOR VERTICAL BARE PIPE 1/2’’-14’’


A3

S22 PAD FOR HORIZONTAL BARE PIPE 21’’-36’’


A3

S23 LUG FOR VERTICAL PIPE 1/2’’-2’’


A3

S24 LUG FOR VERTICAL PIPE 16’’-24’’


A3

S25 LUG FOR VERTICAL PIPE 26’’-36’’


A3

S26 LUG FOR VERTICAL PIPE 26’’-36’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S27 SLIDE LUG FOR VERTICAL PIPE 16’’-36’’ (CS-WITHOUT PWHT)


A3

S28 SLIDE LUG FOR VERTICAL PIPE 16’’-36’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S29 SLIDE STOOL AT ELBOW 2’’-24’’ (CS-WITHOUT PWHT)


A3

S29 SLIDE STOOL AT ELBOW 2’’-24’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S31 SLIDE STOOL AT STRAIGHT PIPE 2’’-24’’ (CS-WITHOUT PWHT)


A3

S32 SLIDE STOOL AT STRAIGHT PIPE 2’’-24’’ (CS-PWHT , ALLOY STAINLESS STEEL)


38



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

S33 TIGHT STOOL AT ELBOW 2’’-24’’ (CS-WITHOUT PWHT)


A3

S34 TIGHT STOOL AT ELBOW 2’’-24’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S35 TIGHT STOOL AT STRAIGHT PIPE 2’’-24’’ (CS-WITHOUT PWHT)


A3

S36 TIGHT STOOL AT STRAIGHT PIPE 2’’-24’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S37 ADJUSTABLE STOOL AT ELBOW 2’’-6’’ (CS-WITHOUT PWHT)


A3

S38 ADJUSTABLE STOOL AT ELBOW 8’’-24’’ (CS-WITHOUT PWHT)


A3

S39 ADJUSTABLE STOOL AT ELBOW 2’’-6’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S41 ADJUSTABLE STOOL AT ELBOW 8’’-24’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S41 ADJUSTABLE STOOL AT STRAIGHT PIPE 2’’-6’’ (CS-WITHOUT PWHT)


A3

S42 ADJUSTABLE STOOL AT STRAIGHT PIPE 8’’-24’’ (CS-WITHOUT PWHT)


A3

S43 ADJUSTABLE STOOL AT STRAIGHT PIPE 2’’-6’’ (CS-PWHT , ALLOY ,STAINLESS STEEL)


A3

S44 ADJUSTABLE STOOL AT STRAIGHT PIPE 8’’-24’’ (CS-PWHT , ALLOY, STAINLESS STEEL)


A3

S45 DUMMY PIPE 2’’-24’’ (CS-WITHOUT PWHT)


A3

S45 DUMMY PIPE 2’’-24’’ (CS-WITHOUT PWHT)


A3

S46 DUMMY PIPE 2’’-24’’ (CS-PWHT , ALLOY STAINLESS STEEL)


A3

S46 DUMMY PIPE 2’’-24’’ (CS-PWHT , ALLOY STAINLESS STEEL)


A3

S47 BRACKET


A3

S48 BRACKET


39



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

S49 BRACKET


A3

S51 BRACKET FOR EQUIPMENT (SLIDE) 1/2’’-6’’


A3

S51 BRACKET FOR EQUIPMENT (SLIDE) 8’’-14’’


A3

S51 BRACKET FOR EQUIPMENT (TIGHT) 1/2’’-6’’


A3

S51 BRACKET FOR EQUIPMENT (TIGHT) 8’’-14’’


A3

S52 BRACKET FOR EQUIPMENT 1/2’’-2’’


A3

S53 U-TYPE ON STRUCTURE (ANGLE)


A3

S54 U-TYPE ON STRUCTURE (CHANNEL)


A3

S55 U-TYPE AT GRADE (ANGLE)


A3

S56 CORNER TYPE ON STRUCTURE (CHANNEL)


A3

S57 STANCHION


A3

S58 ANGLE SUPPORT ON STRUCTURE 1/2’’-2’’


A3

S59 ANGLE SUPPORT AT GRADE 1/2’’-2’’


A3

S61 ANGLE SUPPORT 1/2’’-2’’


A3

S61 ANGLE SUPPORT


A3

S62 HANGER WITH PIPE CLAMP 2’’-14’’


A3

S63 HANGER WITH LUG 2’’-14’’ (CS-WITHOUT PWHT)


A3

S64 HANGER WITH LUG 2’’-14’’ (CS-PWHT , ALLOY STAINLESS S)


A3

S65 REINFORCING SADDLE


40



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

S66 VIBRATION BRACE


A3

S67 BASE PLATE WITH MECHANICAL ANCHOR


A3

S68 VIBRATION ELIMINATOR


A3

S69 VIBRATION ELIMINATOR


UNDERGROUND & MISC. PIPING DETAILS


STEAM JACKET DETAILS


PRESSURE BLIND DETAIL


A3

DIMENSIONS Of PIPING COMPONENTS


A3

DIMENSIONS Of PIPING COMPONENTS


A3

1/2" DIMENSIONS Of PIPING COMPONENTS


A3

3/4" DIMENSIONS Of PIPING COMPONENTS


A3

1" DIMENSIONS Of PIPING COMPONENTS


A3

1-1/2" DIMENSIONS Of PIPING COMPONENTS


A3



A3

2-1/2" DIMENSIONS Of PIPING COMPONENTS


A3



A3



A3



A3



A3



41



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3



A3

44"DIMENSIONS Of PIPING COMPONENTS


A3



A3



42



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3



A3



A3



A3

56"DIMENSIONS Of PIPING COMPONENTS


A3



A3



STEAM TRACING DETAILS FLOW INSTRUMENTS


STEAM TRACING DETAILS LEVEL INSTRUMENTS


STEAM TRACING DETAILS PRESSURE INSTRUMENTS


SYMBOLS VALVES, FITTING & MISC’ COMPONENTS FOR PIPING DRAWINGS


PIPE LINE SPACING


PIPE LINE SPACING


PIPE LINE SPACING


CONTROL VALVE PIPING MANIFOLDS


LIQUID LEVEL CONTROLLERS AND LEVEL GLASSES HYDROCARBON SERVICE


LIQUID LEVEL CONTROLLERS AND LEVEL GLASSES HYDROCARBON SERVICE


RELIEF VALVE INSTALLATION AND RELIEF SYSTEM


BRANCH DIMENSIONS


VAPOR BLIND DETAIL


HYDROSTATIC TEST BLIND


CONICAL TYPE SUCTION STRAINER


SUCTION STRAINERS FOR PUMPS “Y” TYPE


43



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


SUCTION STRAINERS FOR PUMPS BASKET “T” TYPE


TYPICAL PIPING ARRANGEMENT FOR PUMPS


INSULATION FLANGES


SWAGED NIPPLE


JACK SCREW


SAMPLE COOLER


DRIP RING

160 TOTAL OF PIPING DWGS.


44


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

ELECTRICAL

NIOEC 000 EG EL SD 6100 1 A1 NIOEC-SD-6100-1/1-A3

REFERENCE DRAWING ELECTRICAL SYMBOLS,ABBREVIATIONS,DEVICE NO.AND GENERAL NOTES "CATEGORY 6100" COVER SHEET


REFERENCE DRAWING ELECTRICAL SYMBOLS,ABBREVIATION DEVICE NO. AND GENERAL NOTES "CATEGORY 6100" INDEX SHEET

NIOEC 000 EG EL SD 6102 1 A1 NIOEC-SD-6102-1/12-

A3

REFERENCE DRAWING ELECTRICAL SYMBOLS, ABBREVIATIONS, DEVICE NO. AND GENERAL NOTES”CATEGORY 6100”


A3



A3



A3



A3



A3



A3



A3



A3



45


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3



A3



A3



REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" COVER SHEET


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" INDEX SHEET


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” LV MOTOR(HORIZONTAL)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS “CATEGORY 6200” MV MOTOR (VERTICAL)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” MOTOR OPERATED VALVE (ON TANK)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” POWER RECEPTACLE


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” STUB-UP CONDUIT PIPE


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CABLE TERMINATION FOR MOTOR


46


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CABLE IDENTIFICATION NUMBER AND LOCATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CABLE ROUTE MARKER & LOCATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CONCRETE CABLE DUCT BANK


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CABLE TRENCH


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CONDUIT & CABLE SUPORT


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" L/V MOTOR (VERTICAL)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” MULTIPLE CONTROL STATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" H/V MOTOR (HORIZONTAL)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" A.F.C MOTOR


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" STANCHION FOR CONTROL STATION


47


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200”INSTALLATION OF STANCHION FOR CONTROL STATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CONDUIT SELECTION CHART


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS ”CATEGORY 6200” CABLE GLAND SELECTION CHART


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" AGITATOR MOTOR


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" PIT PUMP MOTOR


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE TRAY SUPPORT(VERTICAL RUN)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE TRAY SUPPORT(HORIZONTAL RUN)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE TRAY FIXED TO CONCRETE FOUNDATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE TRAY FIXED TO COLUMN


48


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE FIXING ON CABLE TRAY


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" AROUND TRANSFORMER


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" AROUND TRANSFORMER


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE ROOM


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE ROOM(TRENCHES)


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" SWITCHGEAR INSTALLATION


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" HIGH VOLTAGE STARTER


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" WALL MOUNTED PANEL


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" WALL MOUNTED PANEL


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE ENTRANCE TO SUBSTATION


49


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING POWER INSTALLATION AND SUBSTATION DETAILS "CATEGORY 6200" CABLE ENTRANCE TO UPS IN CONTROL BUILDING


REFERENCE DRAWING ELECTRIC LIGHTING INSTALLATION DETAILS "CATEGORY 6300" COVER SHEET


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" INDEX SHEET


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" POWER SUPPLY FROM SUBSTATION


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" LIGHTING PANEL


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(MOUNTED ON STEEL BEAM)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(MOUNTED ON STEEL COLUMN)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(MOUNTED ON CONCRETE BEAM)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(MOUNTED ON CONCRETE STRUCTURE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(STAND TYPE ON PLATFORM)


50



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLUORESCENT LIGHTING FIXTURE(STAND TYPE ON PLATFORM)


POLE MOUNTED STREET LIGHTING FIXTURE


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” MERCURY VAPOR LIGHTING FIXTURE(MOUNTED ON STEEL BEAM)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” MERCURY VAPOR LIGHTING FIXTURE(MOUNTED ON CONCRETE BEAM)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” MERCURY VAPOR LIGHTING FIXTURE(BRACKET TYPE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLOODLIGHTING FIXTURE(MOUNTED ON STEEL STRUCTURE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLOODLIGHTING FIXTURE(MOUNTED ON CONCRETE STRUCTURE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLOODLIGHTING FIXTURE(MOUNTED ON HANDRAIL)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLOODLIGHTING FIXTURE(MOUNTED ON STEEL BEAM)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” FLOODLIGHTING FIXTURE(MOUNTED ON POLE)


51


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" LEVEL GAUGE LIGHING FIXTURE


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” GARDEN LIGHTING POLE


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” CONDUIT SUPPORT(FIXED ON LADDER)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” CONDUIT SUPPORT


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” JUNTION BOX INSTALLATION


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS ”CATEGORY 6300” JUNTION BOX INSTALLATION


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" CONNECTION METHOD(IN JUNCTION BOX)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" STUB-UP CONDUIT PIPE


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" AIR CRAFT WARNING LIGHT


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" AIR CRAFT WARNING LIGHT


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" SOCKET OUTLET (MOUNTED ON PLATFORM)


52


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" SOCKET OUTLET (MOUNTED ON SUPPORT AT GRADE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS "CATEGORY 6300" SOCKET OUTLET (MOUNTED ON CONCRETE STRUCTURE)


REFERENCE DRAWING LIGHTING INSTALLATION DETAILS “CATEGORY 6300” MERCURY VAPOUR LIGHTING FIXTURE （STAND TYPE ON PLATFORM）


REFERENCE DRAWING ELECTRIC GROUNDING INSTALLATION DETAILS "CATEGORY 6400" COVER SHEET


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" INDEX SHEET


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS“CATEGORY 6400” GROUNDING ROD


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” BRANCH WIRE CONNECTION


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” MOTOR (HORIZONTAL)


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” MOTOR(VERTICAL)


REFERENCE DRAWING ELECTRIC GROUNDING INSTALLATION DETAILS "CATEGORY 6400" MOTOR OPERATED VALVE(ABOVE GRADE)


53



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" MOTOR OPERATED VALVE(ON TANK)


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” MULTIPLE CONTROL STATION


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” VERTICAL DRUM,TOWER,TANK


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” GATE,FENCE


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” PIPE RACK


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” LIGHTING POLE


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" CABLE TRAYS


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” EARTHING LUG


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” STUB-UP CONDUIT PIPE


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” CONDUIT SUPPORT


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" PIT PUMP MOTOR


54



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS ”CATEGORY 6400” SELECTION CHART


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" POWER OUTLET


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" A.F.C MOTOR


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" H/V MOTOR (VERTICAL)


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" H/V MOTOR (HORIZONTAL)


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" LOCAL STARTER PANEL


REFERENCE DRAWING GROUNDING INSTALLATION DETAILS "CATEGORY 6400" HEAT EXCHANGER


REFERENCE DRAWING ELECTRIC CATHODIC PROTECTION SYSTEM "CATEGORY 6700" COVER SHEET


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" INDEX SHEET


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” T/RECTIFIRE INSTALLATION DETAILS


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” EARTHING SYSTEM


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” EARTHING SYSTEM(TYPICAL)


55



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” CABLE-PIPE CONNECTION


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” CABLE PIPE CONNECTION


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” TEST BOX(TYPE 1)DETAILS AND INSTALLATION








REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” VERTICAL ANODE GROUND BED INSTALLATION (TYPICAL)


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” VERTICAL ANODE GROUND BED INSTALLATION (TYPICAL)


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” HORIZONTAL ANODE GROUND BED INSTALLATION (TYPICAL)


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM”CATEGORY 6700” ANODE GROUND BED INSTALLATION (TYPICAL)


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" MEXED METAL OXIDE ANODES INSTALLATION FOR STORAGE TANK BOTTOM


56



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" INSTALLATION DETAILS OF MAGNESIUM ROBBON ANODE


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" INSTALLATION DETAILS OF MAGNESIUM ROBBON ANODE


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" CLUSTER MAGNESIUM ANODE INSTALLATION


REFERENCE DRAWING CATHODIC PROTECTION SYSTEM "CATEGORY 6700" CLUSTER MAGNESIUM ANODE INSTALLATION


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" COVER SHEET


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" INDEX SHEET


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" PROCESS AREA










57



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title




REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" TYPICAL VIEW


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" TYPICAL WIRING


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" JUNCTION BOX


REFERENCE DRAWING ELECTRICAL HEAT TRACING DETAILS "CATEGORY 6800" END SEAL AND THERMAL CONTROL DEVICE

142 TOTAL OF ELECTRICAL DWGS.


58



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

INSTRUMENT

NIOEC 000 EG IN SD 7001 1 A1 NIOEC-SD-7001-1/1-A3

INSTRUMENT STANDARD DRAWING LIST


INSTALLATION AND ASSEMBLIES OF KNIFE EDGE TUBE SKIN THERMOCOUPLE






INSTALLATION AND ASSEMBLIES OF THERMOWELLS AND THERMOMETERS










ORIFICE PLATES FABRICATION


ORIFICE PLATES FABRICATION-GENERAL NOTES


ORIFICE PLATES FABRICATION-DESCRIPTION FOR LENGTH OF STRAIGHT RUN


ORIFICE PLATES FABRICATION-SQUARE EDGE & ASME RTJ FLANGES ORIFICE PLATES


ORIFICE PLATES FABRICATION-SEGMENTAL ORIFICE PLATES


ORIFICE PLATES FABRICATION-ECCENTRIC AND QUARTER CIRCLE ORIFICE PLATES


59



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


ORIFICE PLATES FABRICATION-TABLE-1


ORIFICE PLATES FABRICATION-TABLE-2

NIOEC 000 EG IN SD 7005 1 A1 NIOEC-SD-7005-1/25-

A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-GENERAL NOTES AND SYMBOLS


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE GAUGE (1/2)


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE GAUGE (2/2)


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-DRAFT GAUGE INSTALLATION DETAILS


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT ALTERNATIVES


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT LIQUID & STEAM SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT GAS SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT GAS SERVICE, METER BLOW NOZZLE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT REMOTE SEAL TYPE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT LIGHTER SEALING LIQUID SERVICE (1/2)


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-PRESSURE INSTRUMENT LIGHTER SEALING LIQUID SERVICE (2/2)


60



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-DIFFERENTIAL PRESSURE INSTRUMENT LIQUID, STEAM & GAS SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-DIFFERENTIAL PRESSURE INSTRUMENT REMOTE SEAL TYPE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT ALTERNATIVES


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT LIQUID/STEAM SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT GAS & VAPOR SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT LIQUID, STEAM OR CONDENSATE SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT GAS SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT DRY GAS SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT LIQUID, STEAM OR CONDENSATE VAPOR SERVICE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT FLOWING LIQUID HEAVIER THAN SEALING LIQUID


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-FLOW INSTRUMENT LIQUID SERVICE WITH PURGE


A3

PRESSURE AND FLOW INSTRUMENTS IMPULSE LINES-TYPE ON OPEN TANK


61



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

INSTALLATION OF LEVEL INSTRUMENT


A3

INSTALLATION OF LEVEL INSTRUMENT-GENERAL


A3

INSTALLATION OF LEVEL INSTRUMENT-FLANGE TYPE (1/2)


A3

INSTALLATION OF LEVEL INSTRUMENT-FLANGE TYPE (2/2)


A3

INSTALLATION OF LEVEL INSTRUMENT-SCREW TYPE


A3

INSTALLATION OF LEVEL INSTRUMENT- INSTALLATION OF LIQUID LEVEL TRANSMITTERS/ CONTROLLERS W/PURGE HIGH PRESSURE SERVICE


A3

INSTALLATION OF LEVEL INSTRUMENT-INSTALLATION OF GAUGE GLASSES


A3

INSTALLATION OF LEVEL INSTRUMENT- INSTALLATION OF MAGNETIC LEVEL GAUGE


A3

INSTALLATION OF LEVEL INSTRUMENT-LEVEL TRANSMITTER- DIFFERENTIAL PRESSURE INSTRUMENT


A3

INSTALLATION OF LEVEL INSTRUMENT-INSTALLATION OF LEVEL SWITCH


A3

INSTRUMENTATION AIR HOOK-UP


A3

INSTRUMENTATION AIR HOOK-UP-LEGEND AND GENERAL NOTES


A3

INSTRUMENTATION AIR HOOK-UP-SUB-HEADER PIPING


A3

INSTRUMENTATION AIR HOOK-UP-AIR SUPPLY PIPING AND SIGNAL AIR TUBING


A3

INSTRUMENTATION AIR HOOK-UP-INSTRUMENT AIR TUBING


A3

INSTRUMENTATION AIR HOOK-UP-CONTROL VALVE AND TRANSMITTER


62



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

INSTRUMENTATION AIR HOOK-UP-AIR SUPPLY BIRD VIEW


A3

INSTRUMENTATION AIR HOOK-UP-AIR SUPPLY TUBING

NIOEC 000 EG IN SD 7007 9 A1

NIOEC-SD-7007-9/10-

A3

INSTRUMENTATION AIR HOOK-UP-INSTALLATION AND MOUNTING OF INSTRUMENT AIR TUBING SUPPORT


A3

INSTRUMENTATION AIR HOOK-UP-VOLUME TANK INSTALLATION


A3

INSTRUMENTATION SUPPORT AND MATERIAL


A3

INSTRUMENTATION SUPPORT AND MATERIAL-INSTRUMENT PEDESTAL (1/4)


A3



A3



A3



A3

INSTRUMENTATION SUPPORT AND MATERIAL-SUPPORTS FOR LINE MOUNTED INSTRUMENTS (1/4)


A3



A3



A3



A3

INSTRUMENTATION SUPPORT AND MATERIAL-INSTALLATION OF FIELD INSTRUMENT (1/3)


63



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3



A3



A3

INSTRUMENTATION SUPPORT AND MATERIAL-INSTRUMENT SUNSHADE


A3

INSTRUMENTATION SUPPORT AND MATERIAL-TYPICAL INSTRUMENT MOUNTING


A3

JUNCTION BOX AND CABLE SUPPORTS


A3

JUNCTION BOX AND CABLE SUPPORTS-JUNCTION BOX (1/3)


A3



A3



A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT AROUND THE INSTRUMENT (1/3)


A3



A3



A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT IN TANK YARD (1/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT IN TANK YARD (2/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT (1/3)


A3



A3



A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT AROUND THE JUNCTION BOX (1/5)


64



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3



A3



A3



A3



A3

JUNCTION BOX AND CABLE SUPPORTS-INSTALLATION AND MOUNTING OF JUNCTION BOX


A3

JUNCTION BOX AND CABLE SUPPORTS-INSTR. CABLE INSTALLATION AROUND J.BOX


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE TERMINATION IN THE JUNCTION BOX


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT AROUND PIPE RACK (1/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT AROUND PIPE RACK (2/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE TRAY


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE SUPPORT IN TRAY


A3

JUNCTION BOX AND CABLE SUPPORTS-CONNECTION DETAIL (1/3)


A3



A3



A3

JUNCTION BOX AND CABLE SUPPORTS-SECTION OF INSTR. CABLE TRENCH


A3

JUNCTION BOX AND CABLE SUPPORTS-ROAD CROSSING OF THE CABLE WAY


65



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE ROUTE MARKER POSTS (1/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-CABLE ROUTE MARKER POSTS (2/2)


A3

JUNCTION BOX AND CABLE SUPPORTS-INSTRUMENT GROUNDING SYSTEM


CONTROL PANELS


CONTROL PANELS-CONTROL ROOM PANELS


CONTROL PANELS-PANEL SECTION AND SUPPORT DETAIL


CONTROL PANELS-PANEL INSTALLATION DETAIL (1/2)


CONTROL PANELS-PANEL INSTALLATION DETAIL (2/2)


GAS DETECTOR INSTALLATION








A3

WIRING AND EARTHING


A3

WIRING AND EARTHING-WIRING AND EARTHING BIRD VIEW


A3

WIRING AND EARTHING-WIRING AND EARTHING FIELD INSTRUMENT


A3

WIRING AND EARTHING-WIRING AND EARTHING JUNCTION BOX


A3

WIRING AND EARTHING-WIRING AND EARTHING PANEL


A3

WIRING AND EARTHING- WIRING AND EARTHING SYSTEM (1/2)


66



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

WIRING AND EARTHING-WIRING AND EARTHING SYSTEM (2/2)


A3

WIRING AND EARTHING-MULTICABLE TRANSIT (M.C.T.) (1/2)


A3

WIRING AND EARTHING-MULTICABLE TRANSIT (M.C.T.) (2/2)


A3

WIRING AND EARTHING-INSTRUMENT MAIN CABLE ENTRANCE


A3

WIRING AND EARTHING-CABLING OF UNDER GROUND (CONTROL ROOM) (1/2)


A3

WIRING AND EARTHING-CABLING OF UNDER GROUND (CONTROL ROOM) (2/2)


A3

WIRING AND EARTHING-TYPICAL GROUNDING SYSTEM (1/2)


A3

WIRING AND EARTHING-TYPICAL GROUNDING SYSTEM (2/2)


A3

WIRING AND EARTHING-UNDER GROUND CABLE STUB-UP (1/3)


A3



A3


NIOEC 000 EG IN SD 7013 1 A1 NIOEC-SD-7013-1/5-A3 MISCELLANEOUS


MISCELLANEOUS-PRIMARY PIPING SUPPORT (1/2)


MISCELLANEOUS-PRIMARY PIPING SUPPORT (2/2)


MISCELLANEOUS-FIRE PROOF INSTRUMENT


MISCELLANEOUS-CONDENSATE AND SEAL POTS

139 TOTAL OF INSTRUMENT DWGS.


67


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

TELECOMMU-

NICATION

NIOEC 000 EG TC SD 7500 1 A1 NIOEC-SD-7500-1/1-A3

REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" COVER SHEET


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" INDEX SHEET


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" M.D.F PANEL


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" TERMINAL BOARD(1)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" TERMINAL BOARD(2)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" INTERFACE TERMINAL BOARD


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" TELEPHONE(BLDG.-1)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" TELEPHONE(BLDG.-2)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" TELEPHONE(OFFICE)


68


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CONDUIT SUPPORT(1)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CONDUIT SUPPORT(2)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" STUB-UP CONDUIT


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CABLE SPLICING JOINT


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CABLE TRENCH


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CABLE DUCT BANK(ROAD CROSSING)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CABLE I.D.NUMBER TAG DETAIL AND LOCATION


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" CABLE ROUTE MARKER DETAIL AND LOCATION


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" PERFORATED TRAY


69



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" ACOUSTIC TEL.BOOTH(1)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" ACOUSTIC TEL.BOOTH(2)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" EXPLOSIONPROOF HANDSET STATION FIXING ON STEEL RACK


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" EXPLOSION-PROOF HANDSET STATION FIXING ON THE WALL(INDOOR)


REFERENCE DRAWING TYPICAL INSTALLATION DETAILS TELECOMMUNICATION WORK "CATEGORY 7500" SPEAKER AND AMPLIFIER FIXING ON STEEL RACK

23 TOTAL OF TELECOM. DWGS.


70


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

HVAC

NIOEC 000 EG AR SD 9000 1 A1 NIOEC-SD-9000-1/9-A3

COVER SHEET


ABBREVIATION & SYMBOLS FOR HVAC&R DRAWINGS
















COVER SHEET


GENERAL NOTES FOR HVAC&R DRAWINGS


GENERAL NOTES FOR HVAC&R DRAWINGS


COVER SHEET


PIPE SUPPORTS


SINGLE PIPE ROLL HANGER


TYPICAL DETAIL OF WALK-THRU TUNNEL IN SITE


TYPICAL THRU-WALL SLEEVE DETAIL EXTERIOR


TYPICAL MECHANICAL DETIAL FOR PIPE SLEEVES IN FLOORS


TYPICAL MECHANICAL DETAILS FOR THRU-WALL PIPE SLEEVES

NIOEC 000 EG AR SD 9003 1 A1 NIOEC-SD-9003-1/11-

A3

COVER SHEET


A3

DUCT WALL SUPORTS


71



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


A3

RISER SUPPORTS FROM FLOOR


A3

HANGERS FOR HORIZONTAL DUCTS


A3

HANGER ATTACHMENTS FOR DUCTING


A3

DUCT REINFORCED ON ALL SIDES


A3

LONGITUDINAL SEAMS(RECT. DUCT)


A2

RECOMMENDED CONSTRUCTION RECTANGULAR LOW PRESSURE DUCT


A3

RECTANGULAR GOOSENECK


A3

LARGE INTAKE OR EXHAUST COVERS ON ROOF


A3

RECTANGULAR DUCT ACCESS DOORS(EACH THROUGH)


COVER SHEET


TYPICAL POWER ROOF VENTILATION(PRV) INSTALLATION DETAIL


DOUBLE WIDTH DOUBLE INLET FAN


DESERT COOLER FOR COMMERCIAL USE


COVER SHEET


HORIZONTAL SINGLE BLADE FIRE DAMPER


VERTICAL FIRE DAMPER


FIRE DAMPER IN ROUND DUCT SIZE 480mm. DIA.(19")&OVER


CONNECTION DETAILS OF THE AIR SUPPLY & RETURN REGISTER


ROUND & SQUARE CEILING DIFFUSER CONNECTION DETAIL


DETAILS OF THE CONSTRUCTION AND INSTALLATION OF THE THREE SIDED KITCHEN HOOD, LIGHT HOOD


72



Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


DETAILS OF THE CONSTRUCTION AND INSTALLATION OF THE FOUR SIDED KITCHEN HOOD


COVER SHEET


TYPICAL AXIAL TYPE WALL FAN INSTALLATION DETAILS


A3

COVER SHEET


A3

INSTALLATION OF OUTSIDE UNIT ON EXTERIOR WALL


A3

INSTALLATION OF OUTSIDE UNIT ON SUSPEND BOARD OF EXTERIOR WALL


A3

INSTALLATION OF OUTSIDE SIDE ON GROUND, PLATFORM, BALCONY, OUTSIDE CORRIDOR


A3

INSTALLATION OF OUTSIDE UNIT ON ROOF


A3

BRACKET NO.1 OF OUTSIDE UNIT


A3



A2



A3

ADDITIONAL TABLE FOR FIXTURE BETWEEN BRACKET NO.1, NO.2 AND EXTERIOR WALL


A3

FIXED POINT BETWEEN BRACKET NO.2 AND EXTERIOR WALL


A2

DETAILS OF WATER-PROOF ROOF FOR STEEL SLEEVE


COVER SHEET


RECTANGLE AIR CONDITIONING DUCT INSULATION


COVER SHEET


DETAILS OF THE INSTALLATION OF THE LIGHT OIL STORAGE TANK, UNDERGROUND


73


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


INSTALLATION OF TWO OR THREE FUEL OIL TANKS TOGETHER (500~3000 LITERS)


DETAILS OF THE INSTALLATION OF THE No. 2 OIL STORAGE TANK. (UNDERGROUND)


STEAM PRESSURE REDUCING STATION


COVER SHEET


BASE-MOUNTED END SUCTION PUMP INSTALLATION DETAIL


INSTALLATION DETAILS IN-THE-LINE CIRCULATING PUMP


DETAILS OF THE INSTALLATION OF THE DOUBLE SUCTION HORIZONTALLY SPLIT CASE PUMP

66 TOTAL OF HVAC SYSTEM DWGS.


74


Plan/ Proj.


Type Serial

No. Sheet No.

Rev. No.

Reference No. Title

PIPELINE

NIOEC 000 EG PL SD 5501 1 A1 NIOEC-SD-5501-1/2-A1 PIPELINE RIGHT OF WAY

NIOEC 000 EG PL SD 5501 2 A1 NIOEC-SD-5501-2/2-A1 PIPELINE RIGHT OF WAY

NIOEC 000 EG PL SD 5502 1 A1 NIOEC-SD-5502-1/1-A1

PIPELINE RIGHT OF WAY CROSS SECTION

NIOEC 000 EG PL SD 5503 1 A1 NIOEC-SD-5503-1/1-A1 PIPELINE SCRAPER TRAPS


SCRAPER GUIDE BARS FOR PIPELINE TEES


PIPELINE ROAD CROSSING MAJOR & SECONDARY ROAD CROSSING

NIOEC 000 EG PL SD 5505 2 A1


PIPELINE ROAD CROSSING TYPICAL ARRANGEMENT OF CASED PIPE ROAD CROSSING


PIPELINE SINGLE TRACK RAIL ROAD CROSSING


PIPELINE WATER WAY AND QANAT CROSSING



PIPELINE STREAM OR RIVER CROSSING CONCRETE COAT AND SET –ON WEIGHT DETAILS

NIOEC 000 EG PL SD 5509 1 A1 NIOEC-SD-5509-1/1-A1 PIPELINE IRISH CROSSING



PIPELINE DETAILS OF MARKER & WARNING PLATE AT CASED CROSSING



PRECAST CONCRETE WARNING SLAB( PLAN, SECTION AND DETAIL) & PRECAST CONC. CULVERT FOR MAIN ROAD CROSSING



PIPELINE BURIED MAIN BLOCK & VENT VALVE PIT ARRANGEMENT AND DETAILS



PIPELINE BURIED MAIN CHECK VALVE ARRANGEMENT AND DETAILS


DETAIL OF GABIONS AND ITS USE



CATHODIC PROTECTION PIPELINE DETAIL OF POTENTIAL TEST POINT & BOND BOXES


DETAIL OF FITTINGS FOR MAIN VERTICAL OIL STORAGE TANKS


CONN. DETAILS OF AUTO LEVEL GAUGES, DIP &VENT




Type Serial

No. Sheet No.

Rev. No.

Reference No. Title


ORIENTATION FOR MAIN VERTICAL TANKS


INSTALL OF STEAM COILS & DETAILS


FACILITIES FOR 12 m3 NOM. CAPACITY FUEL STORAGE TANK


STANDARD UNDERGROUND TANKS & DETAILS

NIOEC 000 EG PL SD 5522 1 A1 NIOEC-SD-5522-1/-A1

INSTALL OF 20.000 GALL. SERVICE TANKS


10.000 & 20.000 GALL.SERVICE PLATFORM


INST. AND ANCHORING OF 5000 & 10.000 GA U/G TANK


AVIATION FUEL FACILITIES LOADING ISLANDS


AVIATION FUEL FACILITIES OFFLOADING ISLANDS


API SEPERATOR TYPE "1"


API SEPERATOR TYPE "2"


API SEPERATOR DETAILS & SECTIONS


TYPICAL SEPTIC TNKS


STEAM PIPING DETAILS

33 TOTAL OF PIPELINE DWGS.

75

sp-90-00

Documents

revised nioec specifications

oil terminals

new oil refineries

date nioec

construction directorate

design practices

design division

design work