sony dsc-s700 service manual ver 1.3 2008.07 rev-3 (9-852-183-14)
TRANSCRIPT
Revision HistoryRevision History
How to useAcrobat Reader
How to useAcrobat Reader
Internal memoryON BOARD
Internal memoryON BOARD
SERVICE MANUAL
LinkLink
Sony EMCS Co.DSC-S700
SERVICE NOTE
SPECIFICATIONS
BLOCK DIAGRAMS
DISASSEMBLY REPAIR PARTS LIST
Ver. 1.3 2008.07
DIGITAL STILL CAMERA
2008G0800-1 © 2008.07
Published by Kohda TEC9-852-183-14
US ModelCanadian Model
AEP ModelUK Model
E ModelAustralian Model
Chinese ModelKorea Model
The components identified bymark 0 or dotted line withmark 0 are critical for safety.Replace only with part num-ber specified.
Les composants identifiés par unemarque 0 sont critiques pour lasécurité.Ne les remplacer que par une pièceportant le numéro spécifié.
DSC-S700
Revised-3Replace the previously issued SERVICE MANUAL9-852-183-13 with this Manual.
In case of the main board, or main frame assembly failure,contact your local Sony Service Headquarter for the measures.
— 2 —DSC-S700
SPECIFICATIONS
[System]Image device: 7.20 mm (1/2.5 type) color CCD,
Primary color filterTotal pixel number of camera:
Approx. 7 410 000 pixelsEffective pixel number of camera:
Approx. 7 201 000 pixelsLens: 3× zoom lens f = 5.8 – 17.4 mm (35 –
105 mm when converted to a 35 mm stillcamera) F2.8 ~ 4.8
Exposure control: Automatic exposure, SceneSelection (7 modes)
White balance: Automatic, Daylight, Cloudy,Fluorescent, Incandescent, Flash
File format (DCF compliant):Still images: Exif Ver. 2.21 JPEG compliant,DPOF compatibleMovies: AVI (Motion JPEG)
Recording media: Internal Memory (approx.24 MB), “Memory Stick Duo ”
Flash: Flash range (ISO sensitivity(Recommended Exposure Index) set to Auto):approx. 0.5 to 3.5 m (19 3/4 inches to 137 7/8inches) (W)/approx. 0.5 to 2.0 m (19 3/4inches to 78 3/4 inches) (T)
[Input and Output connectors] (USB)•A/V OUT terminal:Video, Audio (Monaural), USBcommunication
USB communication:Full-Speed USB (USB 2.0 compliant)
[LCD screen]LCD panel: 6.0 cm (2.4 type) TFT driveTotal number of dots: 112 320 (480×234) dots
[Power, general]Power: LR6 (size AA) Alkaline batteries (2), 3 V
HR15/51: HR6 (size AA) Nickel-MetalHydride batteries (2) (not supplied), 2.4 VZR6 (size AA) Oxy Nickel Primary Battery(2) (not supplied), 3 VAC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting):1.2 W
Operating temperature: 0 to 40 °C (32 to 104 °F)Storage temperature: –20 to +60 °C (–4 to +140 °F)Dimensions:
91.0×61.0×25.1 mm (3 5/8×2 1/2×1inches) (W/H/D, excluding protrusions)
Mass:Approx. 198 g (7.0 oz) (including twobatteries and wrist strap, etc.)
Microphone: MonauralBuzzerExif Print: CompatiblePRINT Image Matching III: CompatiblePictBridge: Compatible
Design and specifications are subject to changewithout notice.
— 3 —DSC-S700
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITHMARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTSLIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESECOMPONENTS WITH SONY PARTS WHOSE PART NUMBERSAPPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTSPUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORTÀ LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LESDIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONTCRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NEREMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONYDONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OUDANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1. Check the area of your repair for unsoldered or poorly-solderedconnections. Check the entire board surface for solder splashesand bridges.
2. Check the interboard wiring to ensure that no wires are"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularlytransistors, that were installed during a previous repair. Pointthem out to the customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signsof deterioration. Point them out to the customer andrecommend their replacement.
5. Check the B+ voltage to see it is at the values specified.6. FLEXIBLE Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°Cduring repairing.
• Do not touch the soldering iron on the same conductor of thecircuit board (within 3 times).
• Be careful not to apply force on the conductor when solderingor unsoldering.
Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed withthe lead free mark due to their particular size.)
: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.Ordinary soldering irons can be used but the iron tip has to beapplied to the solder joint for a slightly longer time.Soldering irons using a temperature regulator should be set toabout 350°C.Caution: The printed pattern (copper foil) may peel away if theheated tip is applied for too long, so be careful!
• Strong viscosityUnleaded solder is more viscous (sticky, less prone to flow) thanordinary solder so use caution not to let solder bridges occur suchas on IC pins, etc.
• Usable with ordinary solderIt is best to use only unleaded solder but unleaded solder mayalso be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.
— 4 —DSC-S700
TABLE OF CONTENTS
1. SERVICE NOTE1-1. Process After Fixing Flash Error ····································· 1-11-2. Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-1
2. DISASSEMBLY2-1. Disassembly ····································································· 2-1
3. BLOCK DIAGRAMS3-1. Overall Block Diagram ··················································· 3-13-2. Power Block Diagram ····················································· 3-2
4. REPAIR PARTS LIST4-1. Exploded Views ······························································· 4-14-1-1. Overall Section ······························································ 4-14-1-2. Main Frame Block ························································ 4-24-1-3. Lens Block ···································································· 4-34-2. Accessories ······································································ 4-4
Section Title Page
Ver. 1.2 2008.06The changed portions fromVer. 1.1 are shown in blue.
1-1DSC-S700
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: When replacing the camera, erase the data in internal memory of the board before replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
1. SERVICE NOTE
1-1. PROCESS AFTER FIXING FLASH ERROR
Method for Initializing the Flash Error
1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
Initializes the setting to the default setting.
1 Select [OK] with v on the control button, then press z.The message “Initialize all settings Ready?” appears.
2 Select [OK] with v, then press z.The settings are reset to the default setting.
To cancel the resettingSelect [Cancel] in step 1 or 2, then press z.
• Make sure that the power is not disconnected during resetting.
Initialize
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.Copying starts.
To cancel the copyingSelect [Cancel] in step 2 or 3, then press z.
• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in (Internal Memory Tool) (page 48).
• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied.You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be copied.
• Even if you copy data, a (Print order) mark is not copied.
Copy
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z.The message “All data in internal memory will be erased Ready?” appears.
2 Select [OK] with v, then press z.The format is complete.
To cancel the formattingSelect [Cancel] in step 1 or 2, then press z.
Format
2-1DSC-S700
2. DISASSEMBLY
2-1. DISASSEMBLYThe following flow chart shows the disassembly procedure.
(See Page 2-2)
1
3
2
1
3
1
2
A
1 Screw TP1.7 × 3.0
Battery case lid removal
1 Pull out the battery case slowly until stop
2 Put a nail into a slot
3 Pull the battery case in the direction of arrow A
Push middle cover (right) asshown to reveal the gap.
1 Screw TP1.7 × 3.0
2 Middle Cover (Right)
3 Jack Cover
2-2DSC-S700
2. DISASSEMBLY
(See Page 2-3)
(From 2-1 Page)
1
2
3
1
1
1
1
1 Cabinet (Bottom)
1 Screw TP1.7 × 3.0
2 Cabinet (Rear) Assy
3 Button Assy
1 Cabinet (Front) Assy
1 Middle Cover (Left)
Insert the plastic tweezers into the gapbetween middle cover (left) and DC door toprize the middle cover (left).
2-3DSC-S700
2. DISASSEMBLY
Caution
Shorting jig(1kΩ / 1W)
(See Page 2-4)
(From 2-2 Page)
1 Screw TP1.7 × 3.0
2 Cabinet (Upper) Block Assy
1 Screw TP1.7 × 3.0
2 ST Board Complate
1 Screw TP1.7 × 3.0
2 LCD Holder
3 LCD
1 SW Frame Assy
1
2
3
1
1
2
2
1
2-4DSC-S700
2. DISASSEMBLY
1
2
1
1
2
4
3
1 Screw TP1.7 × 3.0
2 MCU Block Assy
1 Screw TP1.4 × 3.0
2 Lens Assy
3 Screw TP1.7 × 3.0
4 Strap Bracket
(From 2-3 Page)
2
1
3
4
HELP02
HELP01
HELP02
HELP03
HELP01
1 Lens Block Protection Sheet
2 Screw TP1.4 × 3
3 CCD Assy
4 Low Pass Filter Set
Ver. 1.3 2008.07The changed portions fromVer. 1.2 are shown in blue.
HELPDSC-S700
HELP
Be careful about the Lens Assy.
Attach the Block assy protection sheet as shown.
Don't press the Sensor holder
Don't press the AF Motor
Keep clean these Pins.
Attach the Lens block protection sheetcovering this screw.
Attach the Lens block protection sheetavoiding three screw holes.
Screw hole
Screw holes
Screw
Lens blockprotection sheet
Don't press the Barrier part.
HELP01
HELP02
HELP03
Ver. 1.3 2008.07The changed portions fromVer. 1.2 are shown in blue.
3-1DSC-S700
PXCLKHDVDCDS_ENSCLKSDATAAFERSTTG_ENVSUB_Con1VSUB_Con2CCD_ONTG_ONCDS_ONCCD[0..11]
LENS_PSSHUTTER_M1SHUTTER_M0IRIS_M1IRIS_M0ZOOM_M1ZOOM_M0
FOCUS_PIZOOM_PRZOOM_PILENS_SDATALENS_SCLKLENS_ENFOCUS_M0FOCUS_M1
LCD_HDLCD_VD
LCD_ENLCD_MCLK
LCD_SCLKLCD_SDATA
LCD[0..7]
MLCD_ONBL
MODE_R5MODE_R4
MODE_R2MODE_R1MODE_R0SHUT1SHUT2PW_LED
USB_DETAV_DETVIDEO_OUTLINE_OUTBEEPER
D+D-
FA23FA20FA22FA21
MD[0..7]
WEWP
R/B
ALECE0REMS_CLK
CLEMS_INS#
STA_LED
SW_TELE
SW_WIDE
SW_KEY_ADC
PWR_CTRL
CCD_ON
FLASH_RDYFLASH_CHG_LSTROBE_TRGSTROBE_CHG
RAMCASRAMRAS
RAMLDQSRAMUDQS
RAMUDMRAMCLK_N
RAMCLKRAMCLK_EN
RAMCS_N
RAMWE_NRAMLDM
RAMD[0..15]RAMA[0..14]
RAMREF
DGND
DGND
DGND
+5VM
+13.4V
+13.6V
+5VM
DGND
DGND
DGND
DGND
DGND
DGND
+3.3V
-7.5V
+13.4V
+3.1VD
+3.1VD
BAT_LOADPWRKEY
PWR_KEY
PWR_ON
VP
-7.5V
+2.5VD
+3.3V
+3.1VD
+5VM
+1.8VD
FLASH_VP
+3.1VD
+2.5VD
DGND
+1.8VD
+3.1VD
+2.5VD
+3.3V
+3.3VS
VP
UGND
+3.1VD
DGND
+3.1VD
UGND2
UGND2
+3.1VD
+5VM+3.3V
SW_PLAYBACK
VP
STROBE_TrgCharge_cFLASH_RDY
MODE_R0 ~R5
SHUT1,2
STROBE_Chg
AF_LED
+13.4V
BEEPER
+3.1VD
STROBE_PWR
MS_ON
CCD_ON1
LCD 2.0
INCH
PANEL
LCD_BACKLIGHT
PC
IRIS MOTOR
SHUTTER MOTOR
FOCUS SENSOR
ZOOM SENSOR
ZOOM MOTOR
FOCUS MOTOR
ST_LED
12
R131*10K
R0402G2112-1002-00
R131*10K
R0402G2112-1002-00
DDR
DDR
DGND
+2.5VD
RAMD[0..15]RAMA[0..14]
RAMLDMRAMWE_N
RAMCASRAMRAS
RAMCS_NRAMLDQSRAMUDQS
RAMUDMRAMCLK_N
RAMCLKRAMCLK_EN
RAMREF
1 2REDRED
CDS
CDS
+3.3V
CCD[0..11]
VDCDS_EN
HD
SCLKSDATAAFERSTTG_EN
PXCLK
VSUB_Con1VSUB_Con2
-7.5V
+13.4V
CCD_ONDGND
TG_ONCDS_ON
4132
32.768KHz32.768KHz
1 2
120
.1U
K_16V
_X
5R
0.1
UK
_16V
_X
5R
FLASH
FLASH
+5VM
DGND
FLASH_VP
+3.1VD STROBE_CHG
FLASH_RDYFLASH_CHG_LSTROBE_TRG
AF_LEDSTROBE_PWR
1
42
3
NCS
P1,P2
S
P1,P2
1 2GREENGREEN
1 2GREENGREEN
MEMORY
MEMORY
MD[0..7]
CLEWEWPALECE0RE
R/B
MS_CLK
FA23FA20
MS_INS#
FA22FA21
+3.1VD
UGND2
MS_ON
DGND
31
42 5
6
SW
SW
+3.1VD
DGNDSW_KEY_ADC
STA_LED
UGND2
POWER
POWER
CCD_ON
-7.5VPWR_CTRL
+13.4V
+2.5VD
+1.8VD
+3.3V
+3.1VD
+5VM
VP
DGND
CCD_ON1
31
42 5
6
1 2GREENGREEN
41
23
8
76
5
Q17
AO8803G2013-0081-00SOP8_0.65_9
Q17
AO8803G2013-0081-00SOP8_0.65_9
DSP
DSP
VSUB_Con1
AFERST
VSUB_Con2
CCD[0..11]
PXCLK
SCLKSDATA
CDS_ENVD
TG_EN
HD
RAMD[0..15]
RAMREF
RAMA[0..14]
RAMCLK_EN
RAMLDQS
RAMWE_N
RAMCS_NRAMRASRAMCAS
RAMLDM
RAMUDM
LENS_EN
STROBE_CHG FOCUS_M1FOCUS_M0
SHUTTER_M0
IRIS_M0
SHUTTER_M1
IRIS_M1
LENS_SCLKLENS_SDATA
LENS_PS
USB_DETD-D+
PWR_CTRL
STROBE_TRG
PWR_ON
LCD[0..7]
LCD_HDLCD_VD
LCD_SDATA
LCD_EN
LCD_SCLK
LCD_MCLK
LINE_OUTVIDEO_OUT
FLASH_CHG_L
VP
DGND
+1.8VD
+3.1VD
+2.5VD
+3.3VS
ZOOM_PI
FOCUS_PIZOOM_PR
BL
STA_LED
BEEPER
ZOOM_M0ZOOM_M1
BAT_LOAD
CE0
AV_DET
MS_INS#
PW_LED
SW_TELE
SW_WIDE
ALE
CLE
WP
R/B
MD[0..7]
RE
MLCD_ON
WE
FA21FA22FA20FA23
MS_CLK
PWRKEY
SW_KEY_ADC
CDS_ONTG_ON
CCD_ON
FLASH_RDY
+3.3V
SW_PLAYBACK
MODE_R2
MODE_R4MODE_R5
SHUT1SHUT2
MODE_R1MODE_R0
AF_LED
RAMUDQS
RAMCLKRAMCLK_N
BEEPER
MIC
MIC
_N
STROBE_PWR
MS_ON
CCD_ON1
12
12
1000P
K_25V
_X
7R
1000P
K_25V
_X
7R
BATT+1BATT+1
JACK
JACK
D+D-
+13.6V
+3.1VDUSB_DET
DGNDA/V_DETVIDEO_OUTLINE_OUTBEEPER UGND
12
LCD
LCD
+3.3V
DGND
MLCD_ON
+5VM
LCD_ENLCD_MCLK
LCD_VDLCD_HD
LCD_SCLKLCD_SDATA
LCD[0..7]
BL
1 3
2
1 2
F21A/30VF2
31
42 5
6
12
1000P
K_25V
_X
7R
1000P
K_25V
_X
7R
LENS
LENS
LENS_PSSHUTTER_M1SHUTTER_M0IRIS_M1IRIS_M0ZOOM_M1ZOOM_M0FOCUS_M1FOCUS_M0LENS_ENLENS_SCLKLENS_SDATA
+5VM
+3.1VD
ZOOM_PI
FOCUS_PIZOOM_PR
DGND
12
TOP
TOP
MODE_R4
MODE_R2MODE_R1MODE_R0
PWR_KEY
SHUT1SHUT2PW_LED
MODE_R5
+3.1VDDGND
BATT-1BATT-1
1 2
F11.6A/36VF1
Pow
er
4
Out1
GND_33
GND_22
MIC1
SPM0204HD5
MIC4_4.72X3.76_173
G2412-0039-00
MIC1
SPM0204HD5
MIC4_4.72X3.76_173
G2412-0039-00
3. BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM
Ver. 1.2 2008.06The changed portions fromVer. 1.1 are shown in blue.
3-2DSC-S700
3. BLOCK DIAGRAMS
3-2. POWER BLOCK DIAGRAM
+13V_VD
-7.5V_VD
+3.1V CDS
+2.5VD
+5VM
+1.8VD
+2.5VD
+3.1V TG
+3.1V
+1.8VD
-7.5V
+13.4V
+3.1VD
+3.1VD
+3.1VL
+2.5VD
+5VM
+3.1VD
+3.1VD
+3.1V
+3.1VD
+3.3VS
+3.1VD
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
+3.1VD
+3.3V
-7.5V_CCD
+13V_CCD
+13.4V
+3.1VD
+5VM
+5VM
+3.1VD
FLASH_VP
BL
VH
VL
PVDD DVDD AVDD
VDD
VL
VDD
VDDQ
VCC
VCC2
VDDPLLVDDUSBPLLVDDCORE
VDDDDR
VDDPVDDDACVDDUSB
VDDSPKRVDDADCVDDAUO
PVDDAVDDVCC
LED anode
ZPIV
AFPIV
ZPRCO
SW BOARD
LCD 2.0 INCH
PANEL
LCD_BACKLIGHT
PVCC
VCC
VM1
VM2
VM3
MCU BOARD
STROBE BOARD
Q2
VDDPWR
VCC
LDO
U11
TOP BOARD
CCD BOARD
U1
U2
VCC
IN
BUFFER
FB
SW
12
1000PF X 21000PF X 2
12
0.1UF X 40.1UF X 4
1 2
*1K*1K
12
0.1UF0.1UF
12
1UF1UF
12
0.1UF X 40.1UF X 4
12
10UK10UK
12
10UF10UF
2
13
Q12Q12
12
10UF10UF
12
2.2UK2.2UK
12
1UF1UF
120.1UF X 20.1UF X 2
12
0.1UK0.1UK
12
1UF1UF
12
0.1UF X 20.1UF X 2
12
47UF47UF
12
0.1UF0.1UF
12
0.1UF0.1UF
1 2BULEBULE
2
13
Q13Q13
12
4.7UK4.7UK
12
2.2UK2.2UK
41
23
8
76
5
Q17
AO8803G2013-0081-00SOP8_0.65_9
Q17
AO8803G2013-0081-00SOP8_0.65_9
12
0.01UF X 70.01UF X 7
12
0.01UK0.01UK
1210UF X 210UF X 2
12
22UF22UF
1 2
F21A/30VF2
12
4.7UK4.7UK
12
0.1UF X 20.1UF X 2
12
0.1UF0.1UF
12
0.1UK0.1UK
12
22UF22UF
12
*27.4*27.4
12
0.01UK0.01UK
12
0.01UF X 40.01UF X 4
121000PF X 21000PF X 2
120.1UF X 20.1UF X 2
12
C107#4.7UK_25V
C107#4.7UK_25V
12
22UF22UF
1 2BULEBULE
1
4 2
3
NC S
P1,P2
S
P1,P2
12
0.1UF0.1UF
12
0.1UF X 20.1UF X 2
12
0.1UF0.1UF
12
1UF X 21UF X 2
12
4.7UF4.7UF
12
22UF22UF
12
0.01UK0.01UK
12
10UF10UF
13
2
12
22UF22UF
1210UF X 210UF X 2
12
+47UF
+47UF
12
10UF10UF
12
1000PF1000PF
12
R131*10K
R0402G2112-1002-00
R131*10K
R0402G2112-1002-00
12
*3.3K*3.3K
1 2BULEBULE
12
1UF1UF
12
1000PF X 31000PF X 3
1 2REDRED
12
4.7UK4.7UK
12
2.2UK2.2UK
BATT+BATT+
BATT-BATT-
1 2
F11.6A/36V
F1
12
10UF X 410UF X 4
Ver. 1.2 2008.06The changed portions fromVer. 1.1 are shown in blue.
4-1DSC-S700
Ref. No. Part No. Description Ref. No. Part No. Description
1 3-210-010-01 SCREW TP1.7*32 3-209-036-01 SCREW TP1.7*33 X-2177-832-1 CABINET (FRONT) ASSY4 3-197-606-01 LID, BT5 3-197-603-01 MIDDLE COVER (LEFT)
6 3-197-601-01 BOTTOM, CABINET
7 3-197-605-01 LID, JK8 3-197-602-01 MIDDLE COVER (RIGHT)9 A-1254-905-A CABINET (UPPER) BLOCK ASSY10 X-2177-833-1 CABINET (REAR) ASSY11 3-209-037-01 SCREW TP1.7*3
12 3-197-610-01 KEY, SHEET
4. REPAIR PARTS LIST
4-1. EXPLODED VIEWS4-1-1. OVERALL SECTION
ns: not supplied
Main Frame Block(See 4-1-2)
2
2
11
12
10
29
5
4
3
6
7
8
11
1
ns
4-2DSC-S700
Ref. No. Part No. Description
4-1-2. MAIN FRAME BLOCK
51 3-113-002-01 SCREW TP1.4*352 3-209-036-01 SCREW TP1.7*353 3-197-607-01 BRACKET, STRAP
054 A-1249-950-A ST BLOCK ASSY (Note 2)55 3-197-609-01 HOLDER, LCD
56 A-1254-907-A FLEXIBLE BLOCK ASSY, SW
4. REPAIR PARTS LIST
ns: not supplied
(Note 2) The adjustment is not required after replacing the ST blockassembly or LCD.
• Refer to cover for mark 0.
(Note 1) In case of the main board, or main frame assemblyfailure, contact your local Sony Service Headquarter forthe measures.
Ref. No. Part No. Description
57 3-197-608-01 LCD (Note 2)* 58 1-820-333-11 MULTI CONNECTOR (REC) 8P
59 X-2319-398-1 BASE, BT
0F1 1-576-913-11 FUSE, MICRO (1608 TYPE) (1.6A/36V)0F2 1-576-363-11 FUSE, MICRO (1005 TYPE) (1A/30V)
Lens Block(See 4-3)
ns(Note 1)
ns(Note 1)
57(Note 2)
51
52
58
55
52
5256
52
52
59
5152
52
52
53
54(Note 2)
F1F2
Ver. 1.3 2008.07The changed portions fromVer. 1.2 are shown in blue.
• Items marked “*” are not stocked since they are seldom required forroutine service. Some delay should be anticipated when ordering these items.
4-3DSC-S700
4-1-3. LENS BLOCK
4. REPAIR PARTS LIST
301
302
303
ns(TP1.4 × 3)(Note)
ns(CCD Assy)
Ref. No. Part No. Description
301 4-110-079-01 FILTER SET, LOW PASS302 4-110-076-01 SHEET, LENS BLOCK PROTECTION303 A-1253-626-A LENS BLOCK ASSY (SERVICE)
(Note) In case of the CCD Assy failure, contact your local SonyService Headquarter for the measures.
ns: not supplied
Ver. 1.3 2008.07The changed portions fromVer. 1.2 are shown in blue.
4-4DSC-S700
4-2. ACCESSORIES
4. REPAIR PARTS LIST
Ver. 1.2 2008.06The changed portions fromVer. 1.1 are shown in blue.
Checking supplied accessories.
A/V cable 3-196-980-01
Wrist strap 2-050-981-01
CD-ROM(Cyber-shot Application Software, handbook “Cyber-shot Handbook”) 2-897-942-01
USB cable 3-196-981-01
LR6 (size AA) Alkaline Battery (Note 1)
Instruction Manual
Cyber-shot Handbook (PDF) (Note 2)(not supplied with DSC-S700)
2-897-955-12 (ENGLISH) (CND, AEP, UK, E, HK, AUS, JE)2-897-955-22 (FRENCH, ITALIAN) (AEP, CND)2-897-955-32 (SPANISH, PORTUGUESE) (AEP, E, JE)2-897-955-42 (GERMAN, DUTCH) (AEP)2-897-955-52 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK, JE)2-897-955-62 (RUSSIAN) (AEP)2-897-955-72 (ARABIC, PERSIAN) (E)2-897-955-82 (KOREAN) (KR, JE)2-897-955-92 (CZECH, POLISH) (AEP)2-897-956-12 (HUNGARIAN, SLOVAK) (AEP)2-897-956-22 (SWEDISH, FINNISH) (AEP)2-897-956-32 (DANISH, NORWEGIAN) (AEP)2-897-956-42 (THAI, MALAYSIAN) (E)2-897-956-52 (TURKISH, GREEK) (AEP)2-897-956-62 (ENGLISH, SPANISH) (US)
2-897-945-11 (ENGLISH)2-897-945-21 (FRENCH)2-897-945-31 (ITALIAN)2-897-945-41 (SPANISH)2-897-945-51 (PORTUGUESE)2-897-945-61 (GERMAN)2-897-945-71 (DUTCH)2-897-945-81 (TRADITIONAL CHINESE)2-897-945-91 (SIMPLIFIED CHINESE)2-897-953-11 (RUSSIAN)2-897-953-21 (ARABIC)2-897-953-31 (PERSIAN)2-897-953-41 (KOREAN)2-897-953-51 (POLISH)2-897-953-61 (CZECH)2-897-953-71 (HUNGARIAN)2-897-953-81 (SLOVAK)2-897-953-91 (SWEDISH)
2-897-954-11 (FINNISH)2-897-954-21 (NORWEGIAN)2-897-954-31 (DANISH)2-897-954-41 (THAI)2-897-954-51 (MALAYSIAN)2-897-954-62 (TURKISH)2-897-954-71 (GREEK)
-549-798-2noitaroproC ynoS 7002 © 11(1)
DSC-S650/S700Before operating the unit, please read this Handbook and “Instruction Manual”thoroughly, and retain it for future reference.
Table of contents
Basic Operations
Using the menu
Using the Setup screen
Viewing images on a TV screen
Using your computer
Printing still images
Troubleshooting
Others
Index
CLICK!
GB
-559-798-2noitaroproC ynoS 7002 © 11(1)
DSC-S650
Operating InstructionsBefore operating the unit, please read this manual thoroughly, and retain it for future reference.
Owner’s RecordThe model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSC-S650
Serial No. ___________________________
For details on the advanced operations, please access “Cyber-shot Handbook” contained on the supplied CD-ROM via a computer.
GB
Note 2: Handbooks (PDF) of each language are included inCD-ROM (Cyber-shot Application Software).
Note 1: This item is supplied with the unit as an accessory,but is not prepared as a service part.
F11-576-913-11FUSE, MICRO (1068 TYPE) (1.6A/36V)
Ref. No. :Part No. :Description :
F21-576-363-11FUSE, MICRO (1005 TYPE) (1A/30V)
Ref. No. :Part No. :Description :
[Regarding Fuse]
• MCU BOARD
Ver. 1.3 2008.07The changed portions fromVer. 1.2 are shown in blue.
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Printing a text1. Click the Print button .2. Specify a printer, print range, number of copies, and other op-
tions, and then click [OK].
Application of printing:To set a range to be printed within a page, select the graphic
selection tool and drag on the page to enclose a range tobe printed, and then click the Print button.
Finding a text1. Click the Find button .2. Enter a character string to be found into a text box, and click
the [Find]. (Specify the find options as necessary)
Application to the Service Manual:To execute “find” from current page toward the previous pages,select the check box “Find Backward” and then click the“Find”.
3. Open the find dialog box again, and click the [Find Again] andyou can find the matched character strings displayed next.(Character strings entered previously are displayed as they arein the text box.)
Application to the Service Manual:The parts on the drawing pages (block diagrams, circuit dia-grams, printed circuit boards) and parts list pages in a textcan be found using this find function. For example, find aRef. No. of IC on the block diagram, and click the [Find Again]continuously, so that you can move to the Ref. No. of IC onthe circuit diagram or printed circuit board diagram succes-sively.Note: The find function may not be applied to the Service
Manual depending on the date of issue.
Switching a page• To move to the first page, click the .
• To move to the last page, click the .
• To move to the previous page, click the .
• To move to the next page, click the .
Reversing the screens displayed once• To reverse the previous screens (operation) one by one, click
the .
• To advance the reversed screens (operation) one by one, click
the .
Application to the Service Manual:This function allows you to go and back between circuit dia-gram and printed circuit board diagram, and accordingly itwill be convenient for the voltage check.
Moving with link
1. Select either palm tool , zoom tool , text selection tool
, or graphic selection tool .2. Place the pointer in the position in a text where the link exists
(such as a button on cover and the table of contents page, orblue characters on the removal flowchart page or drawingpage), and the pointer will change to the forefinger form .
3. Then, click the link. (You will go to the link destination.)
Moving with bookmark:Click an item (text) on the bookmark pallet, and you can moveto the link destination. Also, clicking can display thehidden items.(To go back to original state, click )
Zooming or rotating the screen display“Zoom in/out”• Click the triangle button in the zoom control box to select the
display magnification. Or, you may click or for zoom-
ing in or out.
“Rotate”• Click rotate tool , and the page then rotates 90 degrees each.
Application to the Service Manual:The printed circuit board diagram you see now can be changedto the same direction as the set.
Toolbar
Revision History
Reverse
DSC-S700
Ver.
1.0
1.1
1.2
1.3
Date
2007.02
2007.10
2008.06
2008.07
History
Official Release
Revised-1
Revised-2(DI08-133)
Revised-3
Contents
—
• Change of Supplied accessoriesS.M. Revised : Page 4-4
• Addition of DISASSEMBLY for Lens Assy• Addition of HELP• Change of BLOCK DIAGRAMS• Addition of REPAIR PARTS LIST• Revision of ACCESSORIES• Revision of Regarding Fuse
S.M. Revised : Page 4, 2-4, HELP, 3-1, 3-2,4-2, 4-3, 4-4, Regarding Fuse
• Change of Description for Ref. No. F2 andRef. No. 302S.M. Revised : Page 2-4, HELP, 4-2, 4-3,Regarding Fuse
S.M. Rev.issued
—
Yes
Yes
Yes
985218314.pdf