Mold Releases and Process Aid Additives

• External Mold Releases

• Semi-Permanent Mold Releases

• Process Aid Additives

• Internal Mold Releases

• Uses Include:

• Compression Molding

• Compounding

• Injection

• Transfer Molding

• Calendering

Solutions forRubber

External Mold ReleasesProduct No. Application Technique / Temperature Type of Mold Features

XTEND® Semi-

Permanent Mold

Releases

Solvent -based

21GP Spray or wipe on. Bake initial application at process temperature. All

Long lasting. Can be used at process temperatures up to 700°F/427°C.Do not use to mold silicone elastomers.

19RSSSpray or wipe on at up to 140°F/70°C. Can be used to mold at up to 400°F/205°C.

All including silicone

Periodic application extends life of silicone molds. Reduces tear outs. Do not use to mold silicone elastomers.

Water -based

W-4005B/HT1

Spray or wipe on hot molds, 350°F/177°C and bake initial application for best results.

AllLong lasting. Can be used at process temperatures up to 800°F/538°C. Do not use to mold silicone elastomers.

W-3236 W-3236FG Spray or wipe on at ambient or higher. All

Especially suited to releasing soft elastomers and foams, including silicone. FG is suitable for molding food grade products.

W-7283R Spray or wipe on at ambient or higher. AllGood general purpose rubber release. Excellent for EPDM. Not for silicone. Can be diluted.

MoldWiz® Polymeric

Mold Releases

Solvent -based

F-57/NC Spray or wipe on at ambient or higher. All Contains fluropolymer. Available in aerosol or bulk liquid. Can be used for silicone rubber.

AZN-O Spray or wipe on at ambient or higher. All Especially suitable for molding EPDM. Con-tains anti-oxidant to protect molds in storage.

Water -based

EM-303SF/2 Spray or wipe on at ambient or higher. All Good for molding fluoro-elastomers.

WB-GR50 Spray or wipe on at ambient or higher. All Good slip for belt and o-ring production.

FFIH-15P Preferably spray on at ambient. All Barrier release for silicone molds.

These products reflect only a small portion of what we have to offer. Please contact us for more information. This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives. ISO 9001 Registered. REACH Compliant. MoldWiz®, XTEND®, PasteWiz® and CleanWiz® are registered trademarks of Axel Plastics Research Laboratories Inc. ©2013 Axel Plastics Research Laboratories, Inc. All rights reserved.

For technical data sheets or free samples contact:

Axel Plastics Research Laboratories, Inc.50 Cambridge Drive Monroe, CT 06468 USA1-800-332-AXEL(2935) in USA & Canada1-718-672-8300 Fax: 1-718-565-7447www.axelplastics.cominfo@axelplastics.com

0913

Process Aid Additives

Product Form

Type of RubberMoldWiz® Prod-uct No. Powder Pellet Liquid

Soft Solid

ACM Acrylate/ Polyacrylate IMRI ●

BR Butadiene/Butyl

INT-EQ6 ●

INT-937 ●

CR Chloroprene/ Neoprene

INT-EQ6 ●

INT-54 ●

INT-21G ●

3IMR ●

CSM Chlorosulfonated Rubber

INT-EQ6 ●

INT-21G ●

INT-54 ●

ECO Epichlorohydrin

INT-EQ6 ●

INT-21G ●

EPDMINT-1117LAM ●

IMRI ●

EVAINT-33LCA ● ●

IMRI ●

Process Aid Additives

Product Form

Type of RubberMoldWiz® Prod-uct No. Powder Pellet Liquid

Soft Solid

FVMQ Silicone Elastomer

INT-338 ●

INT-1117EL ●

HNBR High Nitrile Butadiene

INT-44/3PV ● ●

3IMR ●

SBR Styrene Butadiene

INT-33LCA ● ●

INT-34DLK ● ●

IMRI ●

TPE Thermoplastic Elastomer

INT-33LCA ● ●

INT-34DLK ● ●

VP Vinyl PlastisolINT-VP250 ●

IMRI ●

YAU Urethane Elastomers

INT-20E ●

INT-1948MCH ●