Electronica 2014, Munich

Solutions for Low Voltage and High Voltage Drives DC Motor Control Shield for Arduino & 750W Fan Demo with XMC1300, EiceDRIVER™ & IGBTs

Low Voltage High Voltage

Low & High Voltage Drives Markets & Example Applications

Page 2 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

Building Automation Factory Automation

Home & Professional

Motorized Blinds

Air Conditioner

Heating Pumps

Target Markets Building Automation Application Examples

Low Voltage Drives Integrated Solutions from Infineon

n  XMC1000 Family 32-bit Microcontrollers with ARM® Cortex™-M0 o  32MHz, 16 – 64kB Flash

n  XMC4000 Family 32-bit Microcontrollers with ARM® Cortex™-M4F o  80–120 MHz, 64–1024kB Flash

n  OptiMOS™ MOSFETs with lowest RDS(on) and smallest packages

n  PROFET™OptiMOS™ Protected Smart High-Side Switches

n  EiceDRIVER™ o  6EDL04N02PR and

6ED003L02-F2 three phase driver IC

o  2EDL05N06PF half-bridge driver IC

n  Integrated Half- & H-Bridge o  NovalithIC™ & Trilith IC

Families n  Voltage Regulators

(Linear, DC/DC)

Page 3 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

www.infineon.com/sensors www.infineon.com/xmc www.infineon.com/power

Microcontroller Power Sensors

n  Hall Switches, e.g. TLE4968-1 for highly accurate applications with superior voltage capability

n  Angle Sensors, e.g. TLE5009 and TLE5012B GMR Angle Sensors with integrated signal processing

n  Current Sensors, e.g. TLI4970 miniature magnetic digital Current Sensor

XMC Microcontroller Power Management Transceivers Gate Driver Stage Sensors Inverter Stage

XMC1xxx or

XMC4xxx

Current Sense

TLI4970

Rotor Position / Current Sense

M

3-Ph Driver

H-Bridge

Driver

Eice- DRIVER™

Integrated

Motor Driver IC*

OptiMOS™ PROFET™

Low Voltage Drives

Page 4 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

CAN / LIN Transceivers

IFX10xx

CAN/LIN

Hall & GMR

Sensors

*No inverter stage required with Integrated Driver ICs

DC/DC DC/DC Conv.

Linear Voltage Regulators OptiMOS™

DCin (5-48V)

High Voltage Drives Integrated Solutions from Infineon

n  Hall Switches, e.g. TLE4968-1 for highly accurate applications with superior voltage capability

n  Angle Sensors, e.g. TLE5009 and TLE5012B GMR Angle Sensors with integrated signal processing

n  Current Sensors, e.g. TLI4970 miniature magnetic digital Current Sensor

n  XMC1000 Family 32-bit Microcontrollers with ARM® Cortex™-M0 o  32MHz, 16 – 64kB Flash

n  XMC4000 Family 32-bit Microcontrollers with ARM® Cortex™-M4 o  80–120 MHz, 64–1024kB

Flash

n IGBTs o  Reverse Conductive IGBTs o  Reverse Conductive Fast

Switching IGBTs n EiceDRIVER™ o  6ED three phase driver IC

family o  2EDL half-bridge driver IC

family

n SiC Diodes n Voltage Regulators (Linear, AC/DC, DC/DC PFC)

Microcontroller Power Sensors

Page 5 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

www.infineon.com/sensors www.infineon.com/xmc www.infineon.com/power

XMC Microcontroller Power Management Transceivers Gate Driver Stage Sensors Inverter Stage

XMC1xxx or

XMC4xxx

Current Sense

TLI4970

Rotor Position / Current Sense

M

3-Ph Driver

H-Bridge

Driver

Eice- DRIVER™

OptiMOS™ IGBTs

ACin (110-230V)

High Voltage Drives

Page 6 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

CAN / LIN Transceivers

IFX10xx

CAN/LIN

Hall & GMR

Sensors

DC/DC DC/DC Conv.

Linear Voltage Regulators OptiMOS™

AC/DC CoolMOS™ CoolSET™ PWM & PFC

Control (ICExx)

High Voltage

Infineon‘s Demo Platforms for LV & HV Drives

Page 7 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

Low Voltage

n  Brushed DC Motor control up to 250W

n  8-18V nominal input voltage (max 6-40V)

n  Power Shield for Arduino Uno, compatible with XMC1000 Boot-Kit DC Motor Control Shield with Integrated

Half Bridge BTN8982 for Arduino

XMC1000 Motor Control Application Kit

XMC4000 Motor Control Application Kit

n  Three phase power inverter for low power BLDC and PMSM motors 30W (12-24V)

n  Hall sensor, incremental encoder and resolver I/F

n  Includes Motor (15W/24V PMSM with Hall sensors)

n  Three phase power inverter for BLDC and PMSM motors (24V, 7.5A)

n  Hall sensor, incremental encoder and resolver I/F

n  Includes Motor (29W/24V PMSM with Hall sensors and encoder)

XMC 750W Motor Control Application Kit

n  Ready to use 750W power inverter with active PFC using: RC IGBTs, EiceDRIVER™ Gate Drivers, PFC Control IC and SiC Diode and Flyback power supply with CoolSET™ control

n  XMC1300 Microcontroller Drive Card with XMC1302 ARM® Cortex™-M0 MCU (200 KB Flash, 32MHz core, 64MHz peripherals)

n  XMC4400 Microcontroller Drive Card with XMC4400 ARM® Cortex™-M4F MCU (512 KB Flash, 120MHz)

n  Single (with XMC1300) or Dual Motor Control (with XMC4400) using different position sensing techniques (Hall, rotary incremental encoder or resolver

Brushed DC Motor Control Solution with Power Shield for Arduino

n  Brushed DC Motor control up to 250W continuous load:

o  Two uni-directional motors or one bi-directional in an H-bridge configuration

o  8-18V nominal input voltage (max 6-40V)

o  Average motor current 30A (PCB restriction). Max peak current 50A

n  Power Shield for Arduino Uno

n  Compatible with XMC1000 Boot Kit

n  2x BTN8982 integrated high-current half-bridge NovalithIC™:

n  Easy, low-cost way to evaluate and test Infineon’s motor control solutions

n  Software examples for XMC1000 Boot Kit using free DAVETM IDE and DAVETM Apps

n  Outstanding quality and reliability of Infineon power products

n  Support from huge Arduino open source community

Key Features Customer Benefits Core Applications

Page 8 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

Brushed DC Motor Control Demo Shield with Integrated Half Bridge NovalithIC™ for Arduino

Page 9 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

DC Motor Control Shield with integrated

Half Bridge NovalithICTM BTN8982

for Arduino

High Voltage Motor Control Solution with XMC 750 Watt Motor Control Application Kit

n  3-Phase Motor Control Kit optimized for 750W (1 HP) motors

n  110-230 VAC input with Input Filter and Active PFC

n  V/f open loop control

n  Block or sinusoidal commutation with Hall sensors or sensorless

n  FOC with Hall sensors, encoder or sensorless

n  XMC1300 Drive Card with galvanic isolation

n  XMC4400 Drive Card with galvanic isolation

n  Power board: o  3-Phase Inverter with

Reverse Conductive IGBTs (IKD10N60R) and EiceDRIVER™ gate driver (6EDL04I06NT)

o  Input Filter and Active PFC IC (ICE3PCS02G) high switching frequency IGBT (IKB20N60H3) and Silicon Carbide Diode (IDB10S60C)

n  Fully supported by DAVE™ with Motor Control Apps library

n  Easy to use evaluation kit for 3-Phase drives of up to 750 Watt

n  Outstanding quality and reliability of Infineon power products

n  Software examples for different control algorithms using free DAVETM IDE and DAVETM Motor Control Apps Library

n  X-Spy Soft Oscilloscope for realtime monitoring and parametrisation

n  BOM, schematics and PCB design data available for download

Key Features Customer Benefits Core Applications

Page 10 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.

High Voltage Fan Demo using XMC 750W Motor Control Application Kit

Page 11 November, 2014 Copyright © Infineon Technologies AG 2014. All rights reserved.