solutions for designers - iota emergency … fluorescent product... · open circuit isolation...

SOLUTIONS FOR DESIGNERS...

IOTA’s Fluorescent Emergency Ballasts set the standard for emergency lighting solutions.

Our innovative product designs such as the ISL Series slim profile battery packs and AC

output emergency ballasts have paved the way for bringing safe, reliable emergency lighting

to today’s egress applications. We continually expand and enhance our product lines so our

customers have access to reliable emergency lighting solutions that keep pace with the lat-

est ballast and lamp technologies. When the lights go out, you’re prepared...

IOTA Emergency Ballasts offer UL Listed integral emergency lighting

solutions for your lighting schedule. Our products deliver a wide range of

lumen output levels to match your egress environment without the need

for additional circuits or unattractive wall-mounted fixtures.

SOLUTIONS FOR MANUFACTURERS...Whether it’s a strip fixture, downlight fixture or troffer with limited

compartment space, IOTA’s RoHS-compliant products deliver the

value of reliable emergency options to your fixture designs and

lamp and ballast requirements.

SOLUTIONS FOR RETROFIT...Adding emergency lighting to an existing application or revitalizing your en-

vironment with new LED tube lamps? IOTA offers solutions that allow you

to achieve your retrofit objectives without compromising your path of egress

requirements. Our knowledgeable and friendly Customer Service team are

happy to assist with selecting the best emergency battery pack for your proj-

ect. Call us at 1-800-866-4682 or visit us on-line at www.iotaengineering.com

to take advantage of IOTA’s emergency lighting expertise...we can guide you

to the IOTA solution that’s right for you!

IOTA ENGINEERING TEL: 1-800-866-4682

EMERGENCY SOLUTIONS forFLUORESCENT and LED RETROFIT LAMPS

FAX: (520) 741-2837 www.iotaengineering.com

IOTA ENGINEERING

LAMPS OPERATEDMost 2′-4′ single, bipin T8 through T12 fluorescent lamps

INITIAL ILLUMINATION1 lamp 700 lumens90 Minutes

CASE DIMENSIONS9.5″ x 2.375″ x 1.5″ (Fig. B)

WEIGHT2.4 lbs

MOUNTING CENTER 12.6

I-32 500 LUMENS

LAMPS OPERATEDMost 2′-4′ single, bipin 28W T5 through T12 fluorescent lamps


CASE DIMENSIONS9.5″ x 2.0″ x 1.0″ (Fig. A)

WEIGHT1.5 lbs

I-40 700 LUMENS

LAMPS OPERATEDMost 2′-8′ single, bipin T8 through T12 HO and VHO fluorescent lamps

INITIAL ILLUMINATION1 (2′-8′) lamp 700 lumens2 (2′-4′) lamps 350 lumens each90 Minutes


WEIGHT2.4 lbs

I-48 700 LUMENS

LAMPS OPERATEDMost 2′-4′ single, bipin T8, 2′-4′ T5, HO and VHO fluorescent lamps

INITIAL ILLUMINATION1 (2′-4′) lamp 1200 lumens90 Minutes

CASE DIMENSIONS13.0″ x 2.2″ x 1.25″ (Fig. C)

WEIGHT2.5 lbs

I-320 1200 LUMENS

LINEAR FLUORESCENT

FIG. A

FIG. B

FIG. C

TIME DELAY ENHANCEMENT

OPEN CIRCUIT ISOLATION

‘End of Lamp Life’ circuitry in AC ballasts can activate when power switches

from the emergency battery pack to the AC supply. IOTA emergency battery

packs provide a brief delay that allows time for the AC ballast to recognize

that the lamp is still functioning and eliminate conflicts with testing and opera-

tion of the emergency battery pack.

All IOTA emergency ballasts guard against the dangers of an open circuit

caused by an absence of load - such as when the lamps are burned out or

are being removed for replacement.

ALL IOTA EMERGENCY BALLASTS INCLUDE THE FOLLOWING FEATURES...

IOTA’s linear fluorescent products provide prac-tical solutions for most linear lamp type fixtures utilizing 2 to 8 ft T5 through T12 lamps.

4

LED RETROFIT SOLUTIONSAC output IOTA emergency ballasts are compatible and UL Listed for select

LED retrofit tube models. Visit www.iotaengineering.com/ledretrofit.htm for

current compatibility listings.

www.iotaengineering.com

LAMPS OPERATEDMost 2′-8′ single, bipin T8 through T12, 2′-4′ T5, HO and VHO fluorescent lamps


CASE DIMENSIONS18.6″ x 2.375″ x 1.5″ (Fig. E)

WEIGHT4.4 lbs

I-232 1400 LUMENS

LAMPS OPERATED(2) 2′-4′ single, bipin T8 through T12 HO and VHO fluorescent lampsin parallel

INITIAL ILLUMINATION1400 lumens2 lamps 700 lumens each 90 Minutes

CASE DIMENSIONS13.3″ x 2.375″ x 1.5″ (Fig. D)

WEIGHT3.6 lbs

I-880 2000 LUMENS

LAMPS OPERATEDMost 2′-4′ single, bipin T8 through T12, 2′-4′ T5, HO and VHO fluorescent lamps, and 18W-70W 4-pin compact fluorescent lamps.

INITIAL ILLUMINATION1 (2′-4′) lamp 3000 lumens 1 4-pin compact lamp 1750 lumens

CASE DIMENSIONS16.375″ x 3.0″ x 3.0″ (Fig. F)

WEIGHT9.75 lbs

I-160 3000 LUMENS

LAMPS OPERATED(2) 2′-4′ single, bipin T8 through T12 and 54W T5, HO and VHO fluorescent lampsin parallel

INITIAL ILLUMINATION3000 lumens 2 lamps 1500 lumens each90 Minutes


WEIGHT9.75 lbs

I-162 3000 LUMENS

FIG. D

FIG. E

FIG. F

The Parallel Operation design of the I-232 and I-162 offers an additional level of safety by operat-ing two lamps in parallel in the emergency mode. If one of the lamps is inoperable, the emergency ballast will continue to operate the remaining lamp.

PARALLEL OPERATION

I-880 INTEGRAL PROFILE

RECESSED MOUNTING PAN

LINEAR FLUORESCENT

The I-880 is the only emergency battery pack that combines 2000 lumen emergency illumination with an integral housing for installation within trof-fer and strip fixtures.

The I-160 and I-162 are also available with a re-cessed mounting pan option, allowing for installa-tion directly into grid ceiling applications with easy access to the test switch and charge indicator accessories.

Increased emergency illumination and additional safety features are beneficial assets to projects such as municipal fa-cilities, retirement communities, schools and daycares. These units deliver IOTA’s unique advantages to a wide range of critical applications.

5

LED RETROFIT SOLUTIONS

IOTA ENGINEERING

The ISL Series, the original slim-design battery pack, implements a narrow profile ideal for T5 fixtures. With output options up to 1300 lumens, the ISL Series emergency ballasts meet the demands for both safety and design.

T5 - SLIM PROFILE FLUORESCENT

LAMPS OPERATEDMost 2′-4′ 28W and 54W T5, or T8 linear lamps, including HO, and 40-55 watt 4-pin long compact fluorescent lamps.


CASE DIMENSIONS17.5″ x 1.18″ x 1.15″ (Fig. H)

WEIGHT2.4 lbs

ISL-28 500 LUMENS

LAMPS OPERATEDMost 2′-4′ T5 up to 28W or T8 linear fluorescent lamps.


CASE DIMENSIONS14.2″ x 1.18″ x 1.15″ (Fig. G)

WEIGHT2.0 lbs

ISL-54 825 LUMENS

LAMPS OPERATEDMost 2′-4′ 28W and 54W T5, or T8 linear lamps, including HO, and 40-55 watt 4-pin long compact fluorescent lamps. 35W T5 Modification available


CASE DIMENSIONS21.5″ x 1.18″ x 1.15″ (Fig. I)

WEIGHT3.0 lbs

ISL-540 1300 LUMENS

IOTA introduced the ISL Series to provide emergency solutions for T5 applications and architectural fixture designs with limited compartment space. The ISL Series com-bines form and function with up to 1300 lu-men emergency illumination, AC output for low mercury content amalgam lamps, and is rated for use in damp locations and enclosed and gasketed fixtures.

THE ORIGINAL SLIM-LINEEMERGENCY BALLAST...

FIG. G

FIG. H

FIG. I

6


AC output IOTA emergency ballasts are compatible and UL Listed for select LED retrofit tube models. Visit www.iotaengineering.com/ledretrofit.htm for current compatibility listings.


With AC output and different mounting options, IOTA compact fluorescent emergency ballasts provide versatile solutions for many compact lamp types and fixtures in use today.

4-PIN COMPACT FLUORESCENT

LAMPS OPERATED10W-42W 4-pin rapid start compact lamps, including twin, triple, quad tube, and 2D fluorescent lamps

INITIAL ILLUMINATION1 (10W-42W) lamp 650 lumens 2 (10W-18W) lamps 325 lumens ea.90 Minutes


WEIGHTEM-A 4.4 lbsEM-B 2.4 lbs

I-42 650 LUMENS

LAMPS OPERATED10W-57W 4-pin rapid start com-pact lamps, including twin, triple, quad tube, and 2D fluorescent lamps

INITIAL ILLUMINATION1 (10W-57W) lamp 1100 lumens 2 (10W-26W) lamps 550 lumens ea.90 Minutes



I-420 1100 LUMENS

LAMPS OPERATED(2) 13W-42W 4-pin rapid start com-pact lamps, including twin, triple, quad tube, and 2D fluorescent lamps, and 18W-50W long compacts.

INITIAL ILLUMINATION1850 lumens 2 lamps 925 lumens each90 Minutes


WEIGHT9.75 lbs

I-462 1850 LUMENS

FIG B.

FIG D.

FIG F.

Series AC emergency ballasts from IOTA were the first emergency battery packs to offer compatibility with today’s low-mercury content amalgam lamps. The advent of this lamp technology required a unique emergency ballast that could operate with the sensitive design of the lamp. IOTA’s AC Series emergency ballasts were designed specifically to deliver compat-ibility with these newer environmentally-friendly lamps.

AC OUTPUT FOR LOW MERCURYCONTENT AMALGAM LAMPS

IOTA battery packs for compact lamps offer a variety of mounting con-figurations to meet several installation requirements. Refer to page 8 for an overview of available mounting options.

MOUNTING OPTIONS

7

IOTA ENGINEERINGIOTA ENGINEERING

LAMPS OPERATED18 & 26 watt quad tube 2-pin lamps with integral starter

INITIAL ILLUMINATION1 lamp 650 lumens 90 Minutes



I-13 650 LUMENS

LAMPS OPERATED5, 7, 9, and 13 watt twin tube 2-pin with integral starter, 9W-13W quad 2-pin with integral starter

INITIAL ILLUMINATION1 lamp 650 lumens 90 Minutes



I-26 650 LUMENS

2-PIN COMPACT FLUORESCENTMOUNTING CONFIGURATIONSIOTA Emergency Ballasts for compact lamps are available in a variety of mounting configurations to accommodate various fixture types and mounting scenarios. Refer to individual product specifications to deter-mine which mounting configuration is available for each emergency bal-last model.

“B” Configuration

“J” Configuration

FLEXIBLE CONDUIT TOTEST ACCESSORIES (36”)

WIRING TOFIXTURE

“TM” Configuration

The EM-A provides dual flex for wiring to both the fixture or ballast compartment and test accessories.

The EM-B allows for integral installation within the ballast compart-ment. The EM-B may also be mounted atop the fixture when used with a TMK-80 cover accessory.

The EM-J is designed to be mounted to the junction box and provides flexible conduit for remote mounting of the test accessories.

The EM-TM provides a top-mounting option for running wires directly into the ballast compartment. Test accessories are then installed within the fixture.

“R-J” Configuration

“R” Configuration

“A” Configuration

The EM-R provides dual flex for wiring to the fixture or ballast com-partment. The single-piece test accessory is provided with hardware for installation directly within the reflector. (Recommended for OEM installation only.)

Like the EM-J, the EM-R-J can be mounted to the junction box. The single-piece test accessory is provided with hardware for installation directly within the reflector. (Recommended for OEM installation only.)

DUAL FLEX CONFIGURATIONS

FIG. B

NO-FLEX CONFIGURATIONS

SINGLE FLEX CONFIGURATIONS

8


ISD Series emergency ballasts help ensure compliance with national and local regulations with automatic monthly and annual testing. ISD Series ballasts utilize AC output for compatibility with new lamp technologies.

SELF-DIAGNOSTICS

LAMPS OPERATED10W-57W 4-pin rapid start compact lamps, includ-ing twin tube, triple tube, quad, 2D, and long compact fluorescent lamps



WEIGHT5.6 lbs

ISD-80 1100 LUMENS

LAMPS OPERATEDMost 2′-4′ bipin T8,T12, and T5, HO and VHO fluorescent lamps



WEIGHT3.6 lbs

ISD-420-EM-A 1100 LUMENS

LAMPS OPERATED10W-57W 4-pin rapid start compact lamps, in-cluding twin tube, triple tube, quad, 2D, and long compact fluorescent lamps



WEIGHT3.6 lbs

ISD-420-EM-B 1100 LUMENS

FIG. D

The ISD Series emergency ballast will automatically conduct a 90-min-ute annual test and a short monthly 30-second test to determine the status of the emergency system. These tests verify proper operation of the ISD battery and charging circuit, as well as the condition of the des-ignated emergency lamp. Should a failure occur in any of these areas, the ISD will issue an alert and identify the nature of the problem through a sequence of flashes on the indicator light.

MONTHLY AND ANNUAL TESTING

9


AC output IOTA emergency ballasts are compatible and UL Listed for select LED retrofit tube models. Visit www.iotaengineering.com/ledretrofit.htm for current compatibility listings.

IOTA ENGINEERING

ICE Series Cold-Weather Equipment provides neces-sary emergency lighting for outdoor paths of egress. Designed to operate within -18° to 50° C, ICE Series battery packs are ideal for covered walkways, parking garages, and exit points.

COLD WEATHER - OUTDOOR EGRESS

LAMPS OPERATED10W-70W 4-pin rapid start compact lamps, includ-ing twin tube, triple tube, quad, 2D, and long compact fluorescent lamps

INITIAL ILLUMINATION1 (10W-70W) lamp 1300 lumens2 (10W-32W) lamps 650 lumens each90 Minutes


WEIGHT5.6 lbs

ICE-80 1300 LUMENS

LAMPS OPERATEDMost 2′-8′ single, bipin T8 through T12, 2′-4′ T5, HO and VHO fluores-cent lamps



WEIGHT3.6 lbs

ICE-420-EM-A 1300 LUMENS

LAMPS OPERATED10W-70W 4-pin rapid start compact lamps, in-cluding twin tube, triple tube, quad, 2D, and long compact fluorescent lamps

INITIAL ILLUMINATION1 (10W-70W) lamp 1300 lumens2 (10W-32W) lamps 650 lumens each90 Minutes


WEIGHT3.6 lbs

ICE-420-EM-B 1300 LUMENS

FIG. D

The internal battery of the ICE Series emergen-cy ballast is encased within an electrically-con-trolled thermal blanket. The heating element of the blanket activates when conditions approach freezing temperatures. This protects the battery from being damaged by the extreme tempera-tures and ready to supply emergency illumina-tion in the event of a power loss.

If the battery has been discharged for any reason, the Temperature Control Circuitry of the ICE emergency ballast ensures that the bat-tery reaches acceptable temperatures before supplying a charge in order to prevent damage to the battery.

THERMAL HEAT BLANKET

TEMPERATURE CONTROL CIRCUITRY

10


The ETS-20 and ETS Emergency Control Devices promote higher energy savings by allowing the use of auxiliary generator or inverter power on switched fixtures in power failure situations, eliminating the need for ‘always on’ night lights. The ETS units sense the loss of normal AC power and switch to the auxiliary supply. Use the ETS for a single switched fixture. For multiple fixture control and dimming options, use the ETS-20 or ETS-20-DR on a designated circuit up to 20 amps.

The D-48-T operates without an internal battery, and is used as an inverter unit for facilities such as telephone operations buildings that have central 48V battery systems. In power loss situ-ations, the D-48-T will operate the lamp from the 48V supply. While in the emergency mode, the D-48-T operates one of the lamps at full light output for as long as the central 48V battery supply is available.

SPECIALTY PRODUCTS

LAMPS OPERATEDAllows operation of switched fixtures from the generator or inverter supply.

INITIAL ILLUMINATIONFull light output

CASE DIMENSIONS(ETS-20) 4.625″ x 2.25″ x 2.25″ (ETS) 8.0″ x 1.18″ x 1.125″

WEIGHT(ETS-20) 1.0 lbs (ETS) 1.0 lbs

ETS-20 and ETS EMERGENCY CONTROL DEVICES

LAMPS OPERATEDMost 2′-5′ single, bipin T8 & T12 HO or VHO fluorescent lamps

INITIAL ILLUMINATIONFull light output

CASE DIMENSIONS9.5″ x 2.375″ x 1.5″

WEIGHT2.5 lbs

D-48-T EMERGENCY INVERTER BALLAST

OPEN BOARD DESIGNSOpen Board emergency ballast kits include the circuit board with inverter and charger and sep-arate battery pack. These kits are designed for installation within sconces, wall packs and other unusually shaped fixtures. The battery packs are available in three configurations to accom-modate the available fixture space.

AVAILABLE MODELSI-13-L ( for 2-Pin Compact Lamps)I-42-L (for 4-Pin Compact Lamps)

BOARD DIMENSIONS4.0″ x 2.75″ x 1.25″

BATTERY CONFIGURATIONSStick - 1.375″ x 1.375″ x 7.375″ Triangle - 2.4″ x 1.6″ x 2.5″In-line - 1.25″ x 3.875″ x 2.5″

11

Select IOTA emergency ballasts are available for various international voltage standards, such as 220VAC and 240VAC input. Our international voltage model selection includes emergency ballasts for linear, compact and T5 fluorescent lamp types and are available in a full range of lumen output levels. For more information on IOTA emergency ballasts for international volt-ages, contact our Customer Service team.

AVAILABLE VOLTAGES

INTERNATIONAL VOLTAGES

220VAC, 50Hz

240VAC, 60Hz

120VAC, 50Hz

LED RETROFIT SOLUTIONSIOTA Emergency Ballasts that feature AC output are compatible with most LED retrofit lamp de-signs and are UL Listed for select LED retrofit lamp applications. Visit the LED Retrofit Selector Tool at www.iotaengineering.com/ledretofit.htm to find available IOTA emergency ballast and LED lamp solutions.

COMPATIBLE MODELS

I-320 Reduced Profile

I-160 High Lumen Output

I-162 Parallel Operation

ISL-54 and ISL-540 Slim Profile

I-42 and I-420 for Compact Lamps

ISD Self-Diagnostic Series

IOTA ENGINEERING

Select IOTA fluorescent emergency ballasts are suitable for use in Damp Location applications. Designed with extra protection against damp and humid environmental conditions, these units provide emergency light in ambi-ent temperatures of 0° to 50° Celsius. DL units are available for linear, com-pact, and T5 fluorescent lamp types.

Enclosed and Gasketed Fluorescent Fix-tures provide additional protection against contaminants in dirty, dusty, damp, and wet operating environments. IOTA emer-gency ballasts that are indicated for use in enclosed and gasketed fixtures meet the requirements of compliance set forth by U.L. and are acceptable for integral installation within these fixtures.

AVAILABLE UNITS

LINEAR

I-40

I-48

I-320

I-232

I-160

ISD SERIES

ICE SERIES

COMPACT

I-13

I-26

I-42

I-420

I-462

T5 OPERATION

ISL SERIES

AVAILABLE UNITS

LINEAR

I-40

I-48

I-232

ISD-80

ICE-80

COMPACT

I-13-EM-B

I-26-EM-B

I-42-EM-B

I-420-EM-B

ISD-420-EM-B

ICE-420-EM-B

OPTIONS AND FEATURES

TEST SWITCH AND CHARGE INDICATORThe National Electric Code requires regular testing of emergency battery packs and written records of these tests to ensure the opera-tion of emergency units in a power-loss situation. Test accessories are included with all IOTA emergency battery packs for compliance with national and local regulations. Many IOTA battery packs offer a choice of test accessory styles for installation directly within the fixture, reflector, or into a junction box within the wall or ceiling.

The two-piece test kit configuration provides a separate test switch for wiring to the emergency ballast and a red LED charge light for indicating that the battery pack is being charged. The test switch and charge indicator can be mounted within the light fixture or remote mounted through flex to a junction box adjacent to the fixture. Connection of the emergency ballast to the charge indicator is made via spade terminals. Consult the wiring instructions of the particular emergency ballast for proper test switch placement and installation.

The Dual-Color LPTS (Lighted Push-Button Test Switch) provided with ISD Series self-diagnostic bal-lasts is a single component for testing the emergency ballast and indicating the charge status of the battery. In normal operation, the LPTS will serve as a lit indication that the battery pack is being charged. When the switch is pressed, the indicator light turns off, and the fixture is forced into the emergency mode. The dual-color LED indicator is lit red when charging, and green when fully charged and in the standby mode. Leads connect to the LPTS via two spade terminal connections.

The TBTS option provides a single component for testing the emergency ballast and indicating the charge status of the battery. The specialized design of the TBTS features a compact housing ideal for limited compartment space. In normal operation, the TBTS will serve as a lit indication that the battery pack is being charged. When the switch is pressed, the indicator light turns off, and the light fixture is forced into the emergency mode. The smaller threaded body of the TBTS offers simpler installation in fixtures where limited space prohibits the installation of a typical test switch and charge indicator. The TBTS is hard-wired to the emergency ballast during installation and is secured in the fixture with an included hex nut.

TBTS (THREADED BODY TEST SWITCH)

TWO-PIECE TEST SWITCH AND CHARGE INDICATOR

DUAL COLOR LPTS

DAMP LOCATIONLISTED

ENCLOSED ANDGASKETED FIXTURES

12

RoHS COMPLIANCEON ALL MODELS

IOTA emergency ballast products are designed and manufactured in compli-ance with adopted RoHS standards to minimize environmental impact of our electronic equipment through its complete life-cycle - from the initial pro-duction process to end-of-life recycling. The responsible design of IOTA’s emer-gency ballasts restricts the presence of specified chemicals and substances by utilizing quality-driven and verified components that support both our commitment to the environment and life safety product performance.


ACCESSORIES

Use the TMK accessory when a unit is mounted on top of the fix-ture. To avoid exposed wiring when emergency battery packs are top-mounted, the TMK is used to cover the wiring that goes from the battery pack into the fixture. TMK models are available for stan-dard profile (TMK-80), reduced profile (TMK-32), or slim profile (TMK-ISL) units.

Use the TBMK in instances where the battery pack cannot be mounted on the light fixture, such as with downlight fixtures. The battery pack is mounted on the TBMK, which is then mounted on the T-bars of the ceiling grid. The battery pack is secured to the TBMK with mounting clips. Wiring is then run to the fixture via flexible conduit. The TBMK can accept any size IOTA emergency battery pack, and can also be used in conjunction with the RME1 remote mounting enclosure.

The Remote Test Kit (RTK) allows for remote mounting of the test switch and indicator light. The kit consists of 3 feet of flex, the junc-tion box containing the test switch and charge indicator, and face-plate. Also available with TBTS test accessory (TBTS-RTK).

When ordering, specify which IOTA models are being equipped with RTK accessories to ensure component compatibility.

The RME1 enclosure is the perfect size to accept most IOTA non-flexed battery packs for remote mounting. The emergency battery pack is secured within the enclosure and wiring is routed through the 2 feet of flexible conduit of the RME1 to the fixture.

TMK-80 EMERGENCY BALLAST

FIXTURE

CEILING GRID I-160

TBMK BAR

MOUNTING CLIPS

IOTA mounting accessories provide options for remote installation of the emergency ballast and test equipment, and to ensure compliance with national and local safety requirements. For further details on IOTA mounting accessories, contact our Customer Service team.

TEST SWITCH and CHARGE INDICATOR

FACEPLATE

FLEX TO FIXTURE

JUNCTION BOX

FLEX TO FIXTURE

ENCLOSURE LID RME1

EMERGENCY BALLAST

TMK-80, TMK-32 AND TMK-ISL

TBMK MOUNTING KIT

REMOTE TEST KIT

RME1 REMOTE MOUNTING ENCLOSURE

TMK-80 - 2.5″ x 2.5″ x 1.5″

TMK-32 - 2.5″ x 2.2″ x 1.15″

TMK-ISL - 2.5″ x 1.18″ x 1.15″

KIT CONSISTS OF:

(2) 2-ft Mounting T-Bars

(4) Mounting Clips

ENCLOSURE DIMENSIONS

16.375″ x 3.0″ x 3.0″

13

IOTA ENGINEERING

LUMEN REFERENCE CHART

14

REDUCED PROFILES

For shallow compartments

SELF-DIAGNOSTICS AND COLD WEATHER PARALLEL OPERATION

Automatic Self-Testing Units and Outdoor Battery Packs

Emergency illumination even if one lamp is inoperable.

LAMP (# OF LAMPS)

F16 T8 (1)

F16 T8 (2)

F17 T8 (1)

F17 T8 (2)

F25 T8 (1)

F25 T8 (2)

F28 T8 (1)

F28 T8 (2)

F32 T8 (1)

F32 T8 (2)

F40 T8 (1)

F59 T8 (1)

FO96 T8 (1)

14W T5 (1)

21W T5 (1)

24W T5 (1)

28W T5 (1)

28W T5 (2)

35W T5 (1)

39W T5 (1)

47W T5 (1)

54W T5 (1)

54W T5 (2)

95W T5 (1)

17W T6 (1)

27W T6 (1)

30W T6 (1)

F15 T12

F20 T12 (1)

F20 T12 (2)

F40 T12 (1)

F40 T12 (2)

F48 T12 (1)

F96 T12 (1)

IOTA MODEL ICE-80 ICE-420I-420

I-26

I-13

1125

1100

1125

1100

1200

1150

1215

1175

1350

1350

1300

600

1050

1100

1150

680

1150

1150

1125

I-320

1125

1200

1215

1350

850

1150

925

1050

1100

1150

I-40

450

630

700

390

660

I-48

450

650

630

600

700

675

675

390

650

660

650

650

I-880

1800

1665

2000

1850

1650

1450

1600

1600

1575

1575

I-160

1600

2420

3060

2835

1750

2965

2240

2650

2630

2935

2850

I-232

1000

1260

1400

900

1200

ISL-54

650

650

630

700

600

450

500

450

800

700

825

500

600

650

ISL-540

950

950

990

1100

1150

700

850

700

1200

1300*

1100

1300

I-42

ISL-28

320

360

380

425

375

425

500

500

I-162

2700

3000

2400

2500

2675

I-32

450

460

475

500

375

425

450

I-462

FOR QUESTIONS REGARDING LAMP OR LUMEN INFORMATION, CONTACT CUSTOMER SERVICE.

The Lumen Reference Chart is your guide in selecting the right IOTA emergency ballast for your designated lamp type and desired output level. Many IOTA units feature lamp selector leads which will optimize the lumen output of the designated lamp(s) when operating during an emergency. Refer to the installation instructions of the specific IOTA unit to determine if the selector leads should be connected or disconnected to achieve the best performance. For questions regarding particu-lar lamps, contact IOTA Customer Service.

780

1080

1090

1140

740

990

900

970

1100

960

1190

650

1030

ISD-80 ISD-420

*Requires ISL-540 modified for 35W operation

www.iotaengineering.com 15

SLIM PROFILE SELF-DIAGNOSTICS AND COLD WEATHER PARALLEL OPERATION

For narrow ballast compartments

Automatic Self-Testing Units and Outdoor Battery Packs

Emergency illumination even if one lamp is inoperable.

LAMP (# OF LAMPS)

18W Long Compact (1)
















7W PL CF 2-Pin (1)

9W PL CF 2-Pin (1)

13W PL CF 2-Pin (1)

18W PL CF 2-Pin (1)

26W PL CF 2-Pin (1)

13W PL CF 4-Pin (1)

13W PL CF 4-Pin (2)

18W PL CF 4-Pin (1)

18W PL CF 4-Pin (2)

26W PL CF 4-Pin (1)

26W PL CF 4-Pin (2)

32W PL CF 4 Pin (1)

32W PL CF 4 Pin (2)

42W PL CF 4 Pin (1)

42W PL CF 4 Pin (2)

57W PL CF 4 Pin (1)

70W PL CF 4 Pin (1)

9W Circline (T5)

12W Circline (T5)

20W Circline (1)

22W Circline T9 (1)

22W Circline T5 (1)

40W Circline T8 (1)

40W Circline T5 (1)

55W Circline T5 (1)

F282 D/42 (1)

F282 D/42 (2)

F382 D/42 (1)

F382 D/42 (2)

IOTA MODEL ICE-80 ICE-420ISD-420

740

780

1000

1060

1060

1190

I-26

550

650

I-13

350

500

650

1050

1050

1100

1100

1160

1200

1125

1125

I-320

935

955

1110

1070

1160

I-40

600

625

650

I-48

600

625

650

390

400

425

650

650

650

I-880

1500

1525

1600

1600

1680

I-160

2300

2300

2300

1125

1800

1275

1500

1550

1750

1725

I-232 ISL-54

675

675

650

650

425

650

ISL-540

1025

1025

1000

1000

I-42

500

575

650

350

400

350

550

425

600

750

475

500

500

650

600

675

600

950

725

1200

1050

1250

1300

1160

1200

800

850

850

1125

ISL-28

I-162

1120

1485

1450

1900

1900

I-32

450

450

I-462

850

1200

1600

1500

1700

1700

1000

1150

1300

1450

1850

ISD-80

710

860

1160

1120

1120

1120

1100

970

1100

730

980

I-420

570

900

680

1010

810

1200

910

1040

1180

For additional information on IOTA’s fluorescent emergency ballasts and other emergency lighting solutions, visit us at www.iotaengineering.com. Our website features the latest up-to-date information for comparing models, specifying products, or assisting with in-stallation. Our online Technical Library puts you one click away from dozens of IOTA Specification Sheets and Installation Manuals, in addition to an extensive collection of product wiring diagrams – all in PDF format for easy printing. And sign up for news e-mail to stay current on the latest in product offerings and design enhancements for your emergency lighting options! Need some additional assistance? You can easily contact your Customer Service Representative from our IOTA Contacts page. Bookmark us at www.iotaengineering.com!

IOTA Engineering is dedicated to providing products that meet the standards our customers

demand as well as the superior service they deserve.

All IOTA products receive 100% quality inspection before shipment to ensure proper and satisfactory operation. IOTA warranties all emergency battery packs in the continental United States and Canada from defects in materials or workmanship under normal use for five years from date of retail purchase and will repair or replace any IOTA product found to be defective in materials or workmanship free of charge.

DISTRIBUTED BY:

P.O. BOX 11846 TUCSON, AZ 857341361 E. WIEDING ROAD TUCSON, AZ 857061-800-866-4682 • FAX (520) 741-2837 www.iotaengineering.com

REV 022916 ©IOTA Engineering, L.L.C. 2016. All Rights Reserved.

Find us on

Facebook YouTube LinkedIn

solutions for designers - iota emergency … fluorescent product... · open circuit isolation...

Documents