For further help regarding installation visit lumino.lighting

OPTIONAL ACCESSORIES

E00A-001-R1 Linear Joining Kit PairE13/16/25B-020-R1 SolidEdge Internal CornerE13/16/25B-030-R1 SolidEdge External CornerE13/16/25B-040-R1 SolidEdge Slot End Pair 80mm (3.2in)E13/16/25B-050-R1 SolidEdge Slot End Pair 130mm (5.1in)

IMSolidEdge-Profile-R03

21

3 4

!CAUTION !Cut only if necessaryUse correct tools

5 20mm recommended distance

20

25

56

*75

12.

5

20

*75

34

16

20

*75

40

*

E25Wood Screw No 8 35mm

E16Wood Screw No 8 25mm

E13Wood Screw No 8 20mm

SOLIDEDGE PROFILESOLIDEDGE INSTALLATION MANUAL

!

TURN OFF POWER!COUPER LE COURANT!STROM ABSHALTEN!CORTE CORRIENTE!

CHECK THE WALL!VËRIFIER LE MUR!DIE WAND ÜBERPRÜFEN!COMPRUEBE LA PARED!

Check!

• Damage will be caused by incorrect input voltage or short circuit• Ensure access and sufficient free moving air space around products and drivers• Products and power supply gear must not be live wired• Protect products from dust & paint during installation and use• Shielded pair of cables will be required for dimming control signal if applicable• Plan for loads, driver locations, dimming and suitable cable prior to installing• For technical assistance contact your local Lumino distributor.• Use only with class 2 power unit to UL 1310 standard• Use only with maximum output 24VDC voltage Class 2 power unit