solideal - wheels now home | wheels now inc. · solideal® construction wheels page 3 drop center...

SOLIDEAL®

Wheels and Rims

www.solidealusa.com

A comprehensive rAnge of “off the roAd” wheels And rims, All produced to etrto, trA And AtmA stAndArds.

Industrial Multi-Piece WheelsDesigned for all heavy duty applications. Available in 2, 3 and 4 piece components or base wheel for the ‘quick’ tire application. Full range for all sizes of industrial tires and adaptable to most custom applications.

Split WheelsMade with safety and reliability as a priority Usage of special safety hardware and markings for all wheels. Available to fit industrial tire sizes through to 700x12.

Press-on Wheels and HubsManufactured in cast or machined steel to provide quality performance throughout the life of the machine. These wheels are designed for extreme loads with low center of gravity.

Three-piece Construction WheelsProvides safe and reliable performance for all standard construction equipment. Available in Semi-Drop Center (SDC) and Full Tapered Bead Seat Rim Contour (TB) designs for easy tire installation and precise fitment. Fits tubeless and tube-type tires as well as solid tires.

Four-piece Construction WheelsHeavy duty construction available in a full range of 24” both pneumatic and solid tires.

Five-piece Construction WheelsFull range of sizes up to 29” and manufactured to fit construction and mining vehicles. Increased bead seat thickness or heavier loose flange and fixed flange profiles for maximum durability. Optional driver key and taper fixing are available.

Drop-Center WheelsHeavy duty tubeless, drop-center wheels to fit most tubeless construction tire sizes. Designed for use on Skid-Steer Loaders, Backhoes, All Terrain Forklifts and many other construction and agricultural applications.

SOLIDEAL ®

SOLIDEAL®

Wheels and RimsMaintenance and Use

Important Safety Warning for the use of Lock Ring and Divided Wheels!

Tire Mounting - Multi Piece and Divided Wheels



• The wheels / tires and applications indicated in this catalogue are intended as a guide only for typical applications; please contact our representatives for verification for your specific use.• Any tire(s) sizes indicated in this catalogue are related to the possibility to mount the tire(s) on the rim(s) according to ETRTO, TRA and JATMA standards only and are not an indication to wheel / tire capacity compatibility.• It is your responsibility to check the load/speed indices for the individual products with the manufacturer, and to ensure that each component suits your needs.• Any information in this catalogue is merely indicative and can be changed without notice or notification.• Always use clearly identified wheels/components and tires.• Always verify that the wheel(s) and tires(s) are compatible.• Always ensure that the correct axle wheel studs/nuts and washers are used to locate the wheel on to the axle. A list of common wheel stud hole dimensions are listed in this catalogue.• To ensure the best alignment, wheel studs and nuts should be cross fixed when fitting the wheel to the axle hub.• Always ensure the wheel nuts are torqued to the correct setting, using an appropriate tool, such as a Torque Wrench. We recommended to check the torque setting after the first 50 km. • The incorrect use / fitting of components on multi-piece and divided wheels can result in wheel failure. Mounting and removal of wheels and tires should only be performed by trained personnel.• When lubricating the tire bead, only use neutral, non aggressive mounting pastes, according to tire manufacturers recommendations (grease for PON fitting, quick drying soap for solids and paste for pneumatics)• Tire fills influence the strength of the wheel; please advise us if you use tire fill.• Always ensure that the tires are fully deflated before removing the wheel or its components from a vehicle, especially on multi piece and divided wheels.• Prior to inflation and deflation, the components on multi piece wheels should always be carefully checked for correct fitment and positioning. Never try to place/remove components with the use of force.• Deformed, corroded or damaged components must be replaced.• In case of incorrect fitment, demount the components and restart the mounting procedure.• Wheel studs, nuts or washers that show indication of oxidation, or can not be used must be replaced, do not grease or oil.• We recommend periodical checks of the wheel(s)/rim(s) for cracking and corrosion, particular attention should be paid to the shaping radius, valve hole and stud hole areas. If cracking occurs, replace the wheel - Do not try to weld any cracks.• Oxidation and/or paint scratches should be cleaned, treated and re-painted.• Wheels are designed for slow moving earthmover and industrial applications up to 50 km/h

• Always check all bolts and nuts for damage on the thread before assembling the new wheel• Never exceed the air pressure guaranteed for split wheels (note: standards can vary from one wheel to the other)• Change to a lockring wheel if the recommended tire pressure is greater than the split wheel guaranteed pressure• The inflation/deflation of multi-piece and divided wheels must only be carried out by fully trained and authorised personnel, who should follow exactly the instructions provided by the wheel and tire manufacturers. Safety cages and bars must be used in all applications in conjunction with remote inflation gauges.• All types of bolts must always be fitted to the outside, not towards the machine side. Hexagonal bolts can only be used for solid tires, not for pneumatics.

• Please ensure all components are correct, suitable, free from damage and clear of all debris.• With the tire mounted on the rim, inflation should be in two stages: First make sure the tire beads and components are correctly seated and centred, inflate the tire to 1.5 bar. - Inspect the units for deformations, blisters and seating / security of the components. Second, place the wheel and tire in to a suitable safety cage and inflate to the required pressure.Note - we recommend that inflation of DIVIDED wheels should not exceed 2.0 bar until it has been fitted to its axle hub and secured accordingly.

• Before each operation, ensure the tire is fully deflated by removing the valve core completely from the stem.• For Multi-Piece wheels, the operation continues with the removal of the lock ring and flange. Avoid standing in front of the units and the path of loose flange components which might spring off in the case of damage.These instructions are listed as a guide only and does not substitute professional training. No responsibility will be taken for misuse.

• Regular checks of the rim and components for cracks, deformations and damage is recommended - discard any of the above and use new components.• In cases of tire replacement, do not inflate before inspecting the condition and ensuring the correct seating of all components.• Do not rework, heat or weld any components, replace any suspect parts.• All damaged or deformed parts must be scrapped.

SOLIDEAL®

Construction Wheels

Drop Center Wheel

(tubeless type)

RIM PROFILE

Rim Size Bead Seat

Rim Thickness (mm) Versions Status Allowed Tire Size

3.50D-12 5º 4 n 4.50-125JA x 12 5º 3.5 n 5.70-127JA x 12 5º 3.5 n 23 x 8.50 - 12

81/2JA x 12 5º 3.5 n 23 x 10.5 - 12

10 1/2JA x 12 5º 3.5 n 26 x 12 - 12

5JA x 14 5º 3.5 o 26 x 12 - 12

5.50F x 15 5º 5 o

7JA x 15 5º 3.5 n 27 x 8.50 - 15 27 x 9.50 - 15

8LB x 15 5º 4 Std - V2 n 25 x 10.50 - 15 27 x 10.50 - 15 11L - 15 SL

10LB x 15 5º 4 n 29 x 12.50 - 15 31 x 12.50 - 15 11L - 15 SL

13LB x 15 5º 4 n 31 x 15.5 - 15

9.00 x 15.3 5º 4-5 n 10.0/75 - 15.3 11.5/80 - 15.3

9.00 x 15.3 (320) 5º 4-5 n 10.0/75 - 15.3 11.5/80 - 15.3

8LB x 16 5º 4-5 n 11L - 16 SL

10LB x 16 5º 4-5 n 12.5 / 70 - 16 11L - 16SL

8.25 x 16.5 15º 4-5 Std - V2 n 10 - 16.5

9.75 x 16.5 15º 4-5 Std - V2 n 12 - 16.5 26 x 12 - 16.5 31.5 x 13 - 16.5

12 x 16.5 15º 4-5 n 33 x 15.5 - 16.5

10.5 x 17.5 15º 6 n 14 - 17.5

10.5 x 17.5 (388) 15º 6 n 14 - 17.5

9 x 18 5º 4-5 n 10.5 - 18 10.50 / 80 - 18 12.5 / 80 - 18

W9 x 18 5º 4 n 10.5 - 18 10.50 / 80 - 18 12.5 / 80 - 18

W10 x 18 5º 4 n 12.5 / 65 - 18

11 x 18 5º 5 n 12.5 - 18 12.5 / 65 - 18 12.5 / 80 - 18

W11 x 18 5º 5 n 12.5 - 18 12.5 / 65 - 18 12.5 / 80 - 18

W13 x 18 5º 5 n 15.5 / 60 - 18 15.5 / 70 - 18

11.75 x 19.5 15º 6 n 15 - 19.5 380 / 65 - 19.5

14.00 x 19.5 15º 6 n 18 - 19.5

W9 x 20 5º 5 n 10.5 / 11.2 - 20 265 / 50 - 20

W11 x 20 5º 5 n 405 / 70 - 20 15.5 / 70 - 20 16 / 70 - 20 12.5 - 20

W13 x 20 5º 5 n 405 / 70 - 20 15.5 / 70 - 20 16 / 70 - 20

13 x 20 5º 5 n 405 / 70 - 20 15.5 / 70 - 20 16 / 70 - 20

W14L x 20 5º 5 n 17.5 / 65 - 20

11.75 x 22.5 15º 5-6-7 o-n-o 385 / 65 - 22.5 15 - 22.5 36 x 14 - 22.5 (7mm rim only)

13 x 22.5 15º 6 n 445 / 65 - 22.5 18 - 22.5

14 x 22.5 15º 8 n 445 / 65 - 22.5 18 - 22.5

9GRx24 9.00x24/1.5 5º 8 n 13.00 / 14.00 16.00 - 24TG (one star max)

W13 x 24 5º 5-6 n 14.9 - 24 16.5 / 85 - 24 405 / 70 -24 16 / 70 - 24

W14L x 24 5º 5 n 15.5 / 80 - 24

W15L x 24 5º 5 n 16.9 - 24 17.5L - 24 19.5L - 24

W16L x 24 5º 5 n 18.4 - 24 19.5L - 24

W18L x 24 5º 5 n 21L - 24

11.75 x 24.5 15º 6 o 355 / 55 - 24.5

13.00DC x 25 5º 7-8 n 15.5 - 25 17.5 - 25

DW16L x 26 5º 5 n 18.4 - 26DW20 x 26 5º 6-7 n 23.1 - 26

DW25A x 26 5º 6-7 Std - V2 n 750 / 55 - 26

W14L x 28 5º 5 o 16.9 - 28

W13 x 28 5º 7 o 385 / 45 - 28W15L x 28 5º 5-7 o-o 16.9 - 28 18.4 - 28 445 / 28 (7 mm rim only)

- Available- In Progress

5º

5º

5º

15º

H2 TYPE RW - Reduced WellV2 - With 2 valve holes

5º TYPE

15º TYPE

W TYPE

DW TYPE

SOLIDEAL®

Construction Wheels

3 pieCe ConstruCtion Wheels (tube type)

` RIM PROFILE

Rim Size Valve Type

Rim Thickness

(mm)Versions Status Allowed Tire Size

8.50V-24IRA W/T 8 Std n 12.00-24 1300-24 (AIR)9.00V W/T 8 Std n 12.00 - 24 (AIR) 14.00 - 24 (AIR)10.00WI - 24 IRA W/T 8 Std - D n 13.00 - 24 (AIR) 14.00 - 24


RIM

LOCKRING

IRA - Interim advanced rim contourW/T - With valve slot, to be used with tube type tiresStd - StandardD - Taper fixing typeOther versions on request

SOLIDEAL®

Construction Wheels

4 pieCe ConstruCtion Wheels (tube type)

Fixed FlangeLoose Flange

Lockring

Rim


IRA - Interim advanced rim contourW/T - With valve slot, to be used with tube type tiresStd - StandardLD - Minimized flange thicknessD - Taper fixing typeX - Short loose flange rim profileFR or FR(B) - Reinforcement at fixed flange side (block reinforcement)LR or LR(B) - Reinforcement at loose flange side (block reinforcement)R - Reinforcement ring in flangeOther versions on request (Reinf)

Rim Size Valve Type

RimThickness

(mm)

FlangeThickness


8.00V-24IRA W/T 10.5 12 Std-D n 12.00-24(AIR)

8.50V - 24 IRA W/T 10.5 12 Std - D - X n 12.00 - 24 (AIR) 12.00 - 24 (SOLID) 13.00 - 24 (AIR)

9.00 - 24 IRA W/T 11 12 Std - D n 12.00 - 24 (AIR) 13.00 - 24 (AIR) 14.00 - 24 (AIR)

10.00 - 24 IRA W/T 10.5 12-14 Std - HD - Reinf - D - X n 14.00 - 24 (AIR) 14.00 - 24 (SOLID)

11.25 - 24 IRA W/T 10.5 14 Std - D o 355/85 - 24 48.5 x 14 - 24 (SOLID)12.00 - 24 IRA W/T 10.5 14 Std - D o 48.5 x 14 - 24 (SOLID)

RIM PROFILE

OPTIONAL: TAPER FIXING

Section A-A

28º

Taper Fitting Block

Taper Fitting Block Rim

Rim

A

A

RIM PROFILE

SOLIDEAL®

Construction Wheels

3 pieCe ConstruCtion Wheels (tube/tubeless type)

SDC - Semi drop center rim contourTB - Full tapered bead seat rim contourW/T - With valve slot, to be used with tube type tiresT/L - Tubeless, with valve hole for tubeless tiresStd - StandardM - Heavy driver key and pocketK - KnurlingFR or FR(B) - Reinforcement at fixed flange side (block reinforcement)LR or LR(B) - Reinforcement at loose flange side (block reinforcement)T - Turned ID of rimOther versions on request


Lockring

Loose Flange

Rim

Rim Size Type Valve Type

RimThickness


10.00WI-20 SDCW/T T/L 8

Std-M FR(B)-LR(B)-T o 14.00 - 20

10.00VA - 20 SDCW/T T/L 8 Std-M-KW o 14.00 - 20

11.00GT - 20 SDCW/T T/L 6 Std n 11.5 20 12.5 - 20 13.5- 20 14.5 - 20

14.00TG 20 SDCW/T T/L 6 Std o 405 / 70 - 20 (16 / 70 - 20)

8.00TG - 24 SDCW/T T/L 7.5 Std n

12.00-24TG 13.00-24TG 14.00-24TG 12.00-24TG(SOLID)

10.00VA - 24 SDCW/T T/L 8 Std-M-T-K n

1.300 - 24 (AIR) 14.00 - 24 (AIR) 16.00 - 24 (AIR)

9.50 -25 / 1.7 TBW/T T/L 8 Std n

10.00 - 25 / 1.5 TBW/T T/L 8 Std-M n 14.00 -25 (AIR)

11.00 - 25 / 1.7 TBW/T T/L 8 Std n 16.00R - 25

11.25 - 25 / 1.7 TBW/T T/L 8 Std n

12.00 - 25 / 1.3 TBW/T T/L 8 Std n 15.50 - 25 (AIR)

14.00 - 25 / 1.5 TBW/T T/L 8 Std-K n 17.50 - 25 (AIR)

17.00 - 25 / 1.7 TBW/T T/L 8 Std n 20.5 - 25 (AIR) (MAX 16PR)

O-Ring

RIM PROFILE

SOLIDEAL®

Construction Wheels

5 pieCe ConstruCtion

Wheels ( tube/tubeless type)

TB - Full tapered bead seat rim contour.W/T - With valve slot, to be used with tube type tyres.T/L - Tubeless, with valve hole for tubeless tyres.Std - Standard.M - Heavy driver key and pocket.N - Lockring driver.D - Taper fixing type.S - Spotweld on rim.HD - Increased bead seat thickness (TBS).Z - Increased sidering thicknessP - Light / short profile (beat seat) applicationLD - Reduced sidering thickness.FR or FR(B) - Reinforcement at fixed flange side (blockreinforcement).LR or LR(B) - Reinforcement at loose flange side (blockreinforcement).RE - Reduced rim width.X - Short loose flange rim profile.L - Surlock at advance band.NC - Crimped lockring driverNW - Welded lockring driverHL - High LoadFD - Flange driverDE - Extended diameterOther versions on request

Option 1

Option 2

Lockring driver

Taper fixing (see page 5)

Heavy Driver Key

Heavy Driver Pocket

Rim Size Type Valve Type

Rim Thickness


10.00-16 TB T/L 12 Std-D n 39x13-16

13.25 - 20 / 1.7 TB T/L 14 FR-LR- D o 46 X 16 - 20

10.00 - 25 / 1.5 TB W/T T/L 12 Std -N-D n 14.00 - 25

10.00 - 25 / 20 TB W/T T/L 12 Std -N-D n 14.00 - 25

11.25 - / 1.5 TB W/T T/L 12Std-N-M-S-HD-LR (B)

-FR(B) -LD-D-Z o

11.25 - 25 / 2.0 TB W/T T/L 12Std -N-M-S-HD-LR-(B)-

FR(B)-LD-D-Z n 14.00 - 25 (SOLID) 16.00 - 25 (AIR)+(SOLID

13.00 - 25 / 2.5 TB W/T T/L 12Std-N-M-S-HD-LR (B)

-FR(B) -LD-RE-D n 18.00 - 25 (AIR) 480 / 95 - 25

14.00 - 25 / 1.5 TB W/T T/L 12 Std-N-D o 17.50 - 25 (AIR)

15.00- 25 / 3.0 TB W/T T/L 12 Std-N-M-LR-(B) FR(B)-D n 18.00 - 25 (AIR) 480 / 95 - 25

17.00 - 25 / 2.0 TB W/T T/L 12 Std -N- M- D-HD n 20.50 - 25 (AIR)

19.50 -25 / 2.5 TB W/T T/L 12 Std-M-X-D n 23.50 - 25 (AIR)

22.00 - 25 / 3.0 TB W/T T/L 12 Std-N-M-P-X-D n 26.50 25 (AIR)

25.00 - 25 - 3.5 TB W/T T/L 12 Std-N-M-P-L-D n 29.50 - 25 (AIR)

17.00- 29 / 3.5 TB W/T T/L 12 Std-M-D n 24.00 - 29

24.00 - 29 / 3.0 TB W/T T/L 12 Std-M-D o

25.00 - 29 / 3.0 TB W/T T/L 12 Std-M-D o 29.50 - 29

24.00 29 / 3.5 TB W/T T/L 12 Std-M-D o

25.00 - 29 / 3.5 TB W/T T/L 12 Std-M-D n 29.50 - 29

26.00 - 29 / 3.5 TB W/T T/L 12 Std-M-D n 33.25 - 29

27.00 - 29 / 3.5 TB W/T T/L 12 Std-M-D n 33.25 - 29 (AIR)

Fixed FlangeS type

(anti spin block)

Knurling

Loose Flange

Advance Band

Lockring

O-RingRim

L type

(additional ring)

X type

SOLIDEAL®

Industrial Wheels

split Wheels

(tube type)

DIN 961-M10x1x25-10.9

DIN 961-M10x1x25-10.9

DIN 934-M10x1-10.9 S17DIN 127B-8.8

SUNLOC NUT M10x1 S17

CNK SCREW M10x1x35 SUNLOC NUT M10x1 S17

D-BOLT M10x1x25-10.9

3/8” SCREW UNF x1”

DIN 934-M10x1-10.9 S14JIS B1251-1984

3/8” NUT UNF

D-BOLT M12x1.25x30-10.9 JIS B1251-1984

DIN 934-M12X1.25-10.9 S17

DIN 961-M12X1.25-10.9 DIN 127B-8.8

DIN 934-M12X1.25-10.9 S19

DIN 961-M16x1.5x35-10.9

D-BOLT M16x1.5x30-10.9

DIN 127B-8.8DIN 934-M16x1.5-10.9 S2

JIS B1251-1984DIN 934-M16x1.5-10.9 S2

3/8” NUT UNF

D-BOLT M16x1.5x35-10.9 JIS B1251-1984DIN 934-M16x1.5-10.9 S2

D-BOLT M12x1.25x28-10.9D-BOLT M12x1.25x25-10.9

JIS B1251-1984

DIN 934-M12X1.25-10.9 S17

D-BOLT M10x1.25x25-10.9DIN 934-M10x1.25-10.9 S14

JIS B1251-1984

RIM PROFILE

DT Type

Rim Size Rim Thickness (mm) Status Allowed Tire Size

4.50E-6 o 140/55 - 6

3.00D - 8

3.5 n4.00 - 8 5.00 - 8 15 x 4.5 - 8 SOLID

4 n

4.5 n4.00 - 8 5.00 - 8 15 x 4.5 - 8

5 n

3.00D -8 DT 4.5 o 4.00 - 8 5.00 - 8 15 x 4.5 - 8

3.75I -83.5 n

4.00 - 8 5.00 - 8 SOLID 4.00 - 8 5.00 - 85 n

4.25 DT - 8 6 n 18 x 7 - 8

4.33R - 8 5 n 16 x 6 - 8 17 x 7 - 8 18 x 7 - 8

3.50D - 9 5 n 5.00 - 9 16 x 5 - 9

4.00E - 9 DT

4 n

6.00 - 9 16 x 5 - 94.5 n

5 n

5.00F - 10

4 n 6.50 - 10 (SOLID)

4.5 n

6.50 - 106 n

7 n

5.00F - 10 DT 6 o 6.50 - 10

5.00F - 10 DT 4.5 o 6.50 - 10

5.00S - 126 n

7.00 - 127 n

5.00S - 12 DT 6 n 7.00 - 12

UNF 3/8” M10 M12 M16

All types of bolts must always be fitted to the outside, not towards the machine side.

*Hexagonal bolts can only be used for solid tires, not for pneumatics


DT - Flat CenterWP - Without Pilot

SOLIDEAL®

Industrial Wheels

MultipieCe Wheels

(tube type)

Rim

Lockring

3 Piece

3 PieceIRA

2 Piece IRA

2 piece SDC

4 PieceAdvance band

RIM PROFILE

Lockring

Advance band4 piece

SDC

Lockring

Rim

Rim

Rim

Rim

RimLockring

Rim Size TypeValve Type

PCSRIM

THICKNESS (mm)

VERSION STATUS ALLOWED TIRE SIZE

3.00D - 8 TB W/T 4 5 Std n 4.00 - 8 5.00 - 8 15 x 4.5 - 8

7.00D - 8 TB W/T 4 5 Std o 18 x 9 - 8

4.33R - 8 TB W/T 3 6 Std n 16 x 6 - 8 18 x 7 - 8

3.50 - 9 TB W/T 4 4 Std n 5.00 - 9 16 x 5 - 9 (SOLIDS ONLY)

4.00E - 9 TB W/T 4 6 Std n 6.00 - 140 / 55 - 9

6.00E - 9 TB W/T 4 6 Std n 21 x 8 - 9

5.00F - 10 TB W/T 4 6 Std n 6.50 - 10 7.50 - 10

5050F - 10 TB W/T 4 7 Std n 6.50 - 10 7.50 - 10

6050F - 10 TB W/T 4 7 Std n 23 x 9 - 10 200 / 50 - 10

3.00D - 12 SDC W/T 4 5 Std n 4.50 - 12

5.00S - 12 TB W/T 4 7 Std n 7.00 - 12 8.25 - 12

8.00G - 12 TB W/T 4 7 Std n 27 x 10 - 12 23 x 10 - 12

10.00G - 12 TB W/T 4 7 Std o 23 x 12 - 12

3.75P - 13 TB W/T 3 5 Std n 23 x 5

4.50E - 15 SDC W/T 4 5 Std n 5.50 - 15 6.00 - 15 (SOLIDS)

4.50E - 15 SDC W/T 2 5 Std n 5.50 - 15 6.00 - 15

5.50 - 15 TB W/T 4 7 Std n 7.00 - 15 7.50 - 15

5.50F 15 SDC W/T 4 5 Std n 7.00 - 15 7.50 - 15

6.00 - 15 TB W/T 4 7 Std n 7.00 - 15 7.50 - 15 8.25 - 15

6.50 - 15 TB W/T 4 7 Std n 7.50 - 15 8.25 - 15 28 x 9 - 15

7.00 - 15 TB W/T 4 7 Std n 28 x 9 - 15 250 - 15

7.50 - 15 TB W/T 4 8 Std n 250 x 15

8.00 - 15 TB W/T 4 8 Std n 300 - 15 290 - 15


Specific reinforced wheels on request

SOLIDEAL®

Industrial Wheels

MultipieCe Wheels

(tube type)

9.75 - 15 TB W/T 4 8 Std-FRB-R n 28 x 12.5 - 15 355 / 65 - 15 32 x 12.1 - 15

5.50 - 16 TB W/T 4 6 Std n 6.50 - 16 7.50 - 16 8.00 - 16 9.00 - 16

6.00 - 16 TB W/T 4 6 Std n 7.50 - 16

6.00 - 20 TB W/T 4 7 Std n 7.50 - 20

6.50 - 20 TB W/T 4 7 Std n 7.50 - 20 8.25 - 20 9.00 - 20 10.00 - 20

7.00 - 20 TB W/T 4 7 Std n 8.25 - 20 9.00 - 20 10.00 - 20

7.00T - 20 IRA W/T 2 7 Std - D n 8.25 - 20 9.00 - 20 10.00 - 20

7.00T - 20 IRA W/T 3 7 Std - D n 8.25 - 20 9.00 - 20 10.00 - 20

7.50 - 20 TB W/T 4 7 Std n 10.00 - 20 31 x 10 - 20 33 x 12 - 20 36 x 14 - 20

7.50V - 20 IRA W/T 2 8 Std-D n 10.00 - 20

7.50V - 20 IRA W/T 3 8 Std - D n 10.00 - 20

8.00 - 20 TB W/T 4 7 Std n 10.00 -20 11.00 - 20 12.00 - 20

8.00 - 20HD TB W/T 4 10 Str-FRB-R n 10.00 - 20 11.00 - 20 12.00 - 20

8.00V 20 IRA W/T 2 8 Std-D o 10.00 - 20 11.00 - 20 12.00 - 20

8.00V - 20 IRA W/T 3 8 Std-D n 10.00 - 20 11.00 - 20 12.00 - 20

8.50 20HD TB W/T 4 10 Std n 11.00 - 20 12.00 - 20

8.50V - 20 IRA W/T 2 8 Std-D n 11.00- 20 12.00 - 20

8.50V - 20 IRA W/T 3 8 Std - D n 11.00 - 20 12.00 - 20

10.00 - 20HD TB W/T 4 12 Std n

Rim Size TypeValve Type

PCSRIM

THICKNESS (mm)

VERSION STATUS ALLOWED TIRE SIZE

SOLIDEAL®

Industrial Wheels

MultipieCe Wheels

(tube type)

D1

CD

R A D1

CD D1

CD

R B D1

CD

R

D1

CD

R

6

ED1

CD

R

6

D1

CD

R

I

D1

CD

D1

H

D1 D

K

D1

CD

R

D1

CD

G

Radial Standard Types

Nr D CD R

1 18, 5 24 R14

2 21, 5 27 R16

3 27 32 R18

4 20, 5 25 R14

5 32, 15 37 R22.22

6 14 - R14

7 15, 5 - R14

8 18, 5 - R14

9 20 - R14

10 21 - R14

11 20 - R12

12 16 20 R12

26 15 20 R13

30 24, 5 29 R18

31 37 43 R25

33 26 32 R18

Conical Standard Types

Nr D CD a13 15 18, 8 60

14 16 19, 8 60

15 16 22 90

16 15, 5 - 60

17 25, 4 31, 5 80º

18 18, 5 - 60º

19 16, 8 - 60

20 28, 6 36 90

21 21, 5 27 90

22 12 80

23 17 60

24 13 16 90

25 10, 5 60

37 26 31, 5 80

NAVE PLATE PROFILES

RIM PROFILES

NAVE PLATE PROFILES

STUD HOLE TYPES

CONSTRUCTION DROP CENTER MULTI PIECEFP FP FP

FW FW FW

FCW

CD

FCFC

W

FC

FCS

FCS

ONE SIDE SPHERICAL

ONE SIDE SPHERICAL

STRAIGHT

ONE SIDE CONICAL

ONE SIDE CONICAL

TWO SIDES PRESSEDONE SIDE STRAIGHT

ONE SIDE SPHERICAL

ONE SIDE SPHERICAL

TWO SIDES PRESSEDONE SIDE SPHEREICAL

ONE SIDE CONICAL

ONE SIDE CONICAL

TWO SIDES PRESSEDONE SIDE CONICAL

®

solideal.comSDW-002-1009

solideal - wheels now home | wheels now inc. · solideal® construction wheels page 3 drop center...

Documents