Free solar energy:

Easy to use:

APEC FREECHARGE Solar Battery Chargers are

designed to use free omnipresent solar energy to charge large 12V Lead-acid batteries. FREECHARGE series of chargers use folded ESP developed by MITRAMAX to provide portable smart 12V battery chargers for use in cars, buses and boats. Folded panel protects solar surface during transportation.

FREECHARGE series is easy to use. Just unfold the ESP, spread it to face the Sun and connect the battery cable from the charger to the battery terminals. Its built-in intelligent MPPT controller charger embedded on the rear of the ESP will deliver the precise regulated DC voltage to charge the battery.

FREECHARGE series of 12V chargers use folded ESP of two Wp rating to meet different power requirement. The ESP, with its embedded controller, directly delivers 13.6V DC to float charge any 12V DC battery. Users needs no additional hardware to charge. It is a complete solution to charge any 12V DC battery at any indoor or outdoor or mobile location.

Standard models of FREECHARGE offers two power ratings: 90Wp and 180Wp. These can respectively provide 5A and 10A of charging current in any discharged 12V lead-acid battery. Built-in protection prevents any risk of over-charging the battery.

FREECHARGE series has IP65 compliant enclosure and is therefore ideal for its use in open outdoor and remote locations. Thus they are an ideal companion for Passenger car, Tourist cabs, RV trailer, Mobile wire-less of police, Marine luxury boats/Coastal security vessels, Fishing trawlers, Holiday camps, tents at remote places etc

Ideal for all vehicles:

Two standard ratings:

Long endurance in field:

Featuresn

n

n

n

n

n

n

Fully integrated constant voltage peak power solar DC voltage source

High efficiency embedded maximum energy harvesting controller/charger

Provides regulated output voltage of 13.6V DC. (27.2V DC optional)

It provides constant power over a voltage range from 9V to 13.6V

It is encased in a IP65 enclosure to offer climatic endurance in field use

It is designed to perform within specs at ambient temperature up to 80°C and 100% moisture

It is available in two ratings, i.e., 90Wp and 180Wp

Model FC090 FC180

Output Voltage 13.6V

Voltage range at constant 10 to 13.6V 10 to 13.6Vpower

O/P voltage regulation 1% 1%

Output current maximum 5A 10A

Conversion efficiency > 95% > 95%

MPPT logic efficiency > 99% > 99%

Mechanical Ingress IP65 Ip65protection

Protection Output over voltage, over load, reverse polarity

Operating temperature -20°C to 80°C -20°C to 80°C

Storage temperature -25°C to 90°C -25°C to 90°C

Dimension (in mm) 668 x 545 x 75 1185 x 545 x 75

Weight 10.0kG 21.5kG

Connectors 30A rated Battery Clamps

Safety specifications UL1741 FCC Class B compliant

Conform to IEC61215: 2005 and IEC61730-2: 2007

13.6V

Folded ESP Portable Solar Battery Chargers

Specifications

ARABIAN POWER ELECTRONICS COMPANY

P.O. Box 4955, Al Khobar 31952, Saudi Arabia

T: +966 (0)3 887-2001, F: +966 (0)3 887-2125,

E: info@apec-sa.com APEC

FREE CHARGE

www.apec-sa.com

Series