softstarters type ssm medium voltage reliable solid...

ABB Control Inc.

AC 1007

Softstarters

Type SSMMedium voltage2300 – 6900V

Registered by UL to

ISO 9002

for the most demandingapplications

CUS T O M E R F I R ST

QUA L I T Y. . . A L WAY S!

Reliable solid statedigital control...

Heavy duty SCR power assemblies• Rated for 500 percent overload for 60 seconds, 125

percent continuous• Field-proven design in use since 1975• Rugged gate-firing circuit using “ring transformer”

isolation design for superior noise immunity

Industrial “real world” packaging• Load break/fault make disconnect switch with door

safety interlocking mechanism• Isolated, noise-immune low voltage control compartment• NEMA 12 enclosure with bypass vacuum contactor

included as standard• Extra wiring space for MV cables for easy installation

Custom engineered systems• Available in special enclosures and lineups• Numerous control component options including:

Reversing contactorsMotor protection relaysCustomer specified devices

• Horizontal and custom bus interconnects• Various motor configurations including synchronous,

wound rotor and two speed

Digital microprocessor control• Full featured for flexibility, including dual ramp and

S-curve software• LCD status/alarm display and built-in programing

keypad• Serial communications

port standard: RS485with Modbus RTUprotocol or RS485 withWindows interface

• In-depth motor andsystem protectionmonitors

• Monitors 18 separate parameters and maintains anonvolatile fault memory

The SSM advantage

Key construction features• Fused disconnect switch with blown fuse indicators and

door safety interlocks rated for load break/fault makewith automatic grounding arm

• Inline isolation vacuum contactor sized for across-the-line motor starting

• Bi-metallic thermal overload provides backup motorprotection when operating in emergency bypass mode(optional on "soft start only" models)

• 120V fused control power transformer standard in linestart section (optional on "soft start only" models)

• Digital controller provides solid state overload andnumerous protective features for both the motor and thesoft starter

• Programmable keypad with LCD and status LEDs foreasy setup and operation

• Bypass vacuum contactor standard on all models toguarantee cool operation in all environments and extendunit life

• Heavy duty SCR stack assemblies with ring transformerisolated circuit for reliable, hard-firing gate pulse

• Isolated low voltage compartment provides maximumprotection for operating personnel

• Mechanically interlocked medium voltage compartment

AC

100

7 –

2/99

ABB Control Inc. 1

SoftstartersType SSMMedium voltage2300 - 6900V

This catalog is published for information purposes only and is not all inclusive. For additional information on products ortechnical information, consult ABB Control Inc. The installation and use of ABB Control Inc. products should be in accord-ance with the provisions of the U.S. National Electrical Code and/or other local codes or industry standards that are pertinentto the particular end use. Installation or use not in accordance with these codes and standards could be hazardous topersonnel and/or equipment.

Alphanumeric price guide .......................................... 2Catalog numbering system ....................................... 2

Description ................................................................ 3Ordering information ................................................. 4

Technical data ........................................................... 5Approximate dimensions ........................................... 6

Terms & conditions .................................................... 7Approvals .................................................................. 8

AC

1007 – 2/99

2 ABB Control Inc.

Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg.number price sched. code no. number price sched. code no. number price sched. code no.

Alphanumeric price guideSSM-23200-E to SSM-66600-E-S

Catalog price informationList prices shown in this publication supersede all previously publisheddocumentation and are subject to change without notice.

Availability code legendA – Stock to 2 weeksB – 1 to 2 weeksC – 2 to 4 weeksD – 4 to 6 weeksE – Call for deliveryNA – Not available, consult factory

Alphanumeric referenceThis above alphanumeric reference is an extract of AC 5030,Alphanumeric Price Guide, which contains all products sold byABB Control Inc.

AC 5030 is also available on disk for Windows and Macintosh as aMicroSoft Excel 5.0 document.

Description: 5 Open chassis: 6 Enclosed chassis: 7 - 10 Technical data: 11 -12 Schematics: 13 - 14 Dimensions: 15 – 17

Catalog number explanation

SSM - 23 200 - E - S

SoftstarterM — medium voltage

Voltage23 = 2300V33 = 3300V41 = 4160V66 = 6600/6900V

Amperage200 = 200A320 = 320A400 = 400A600 = 600A

S = Switchgear line start panel

E = NEMA 12 enclosure

SSM-23200-E 1 SSM E 4SSM-23200-E-S 1 SSM E 4SSM-23320-E 1 SSM E 4SSM-23320-E-S 1 SSM E 4SSM-23600-E 1 SSM E 4

SSM-23600-E-S 1 SSM E 4SSM-33200-E 1 SSM E 4SSM-33200-E-S 1 SSM E 4SSM-33320-E 1 SSM E 4SSM-33320-E-S 1 SSM E 4

SSM-33600-E 1 SSM E 4SSM-33600-E-S 1 SSM E 4SSM-41200-E 1 SSM E 4SSM-41200-E-S 1 SSM E 4SSM-41400-E 1 SSM E 4

Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg.number price sched. code no. number price sched. code no. number price sched. code no.

SSM-41400-E-S 1 SSM E 4SSM-41600-E 1 SSM E 4SSM-41600-E-S 1 SSM E 4SSM-66200-E 1 SSM E 4SSM-66200-E-S 1 SSM E 4

SSM-66400-E 1 SSM E 4SSM-66400-E-S 1 SSM E 4SSM-66600-E 1 SSM E 4SSM-66600-E-S 1 SSM E 4

1 Consult factory.

AC

100

7 –

2/99

ABB Control Inc. 3

SoftstartersType SSMMedium voltage2300 - 6900V

Description• Fused disconnect switch with blown fuse

indicators and door safety interlocks ratedfor load break/fault make with automaticgrounding arm

• Inline isolation vacuum contactor sized foracross-the-line motor starting

• Bi-metallic thermal overload providesbackup motor protection when operatingin emergency bypass mode (optional on"soft start only" models)

• 120V fused control power transformerstandard in line start section (optional on"soft start only" models)

• Digital controller provides solid stateoverload and numerous protectivefeatures for both the motor and the softstarter

• Programmable keypad with LCD andstatus LEDs for easy setup and operation

• Bypass vacuum contactor standard on allmodels to guarantee cool operation in allenvironments and extend unit life

• Heavy duty SCR stack assemblies withring transformer isolated circuit forreliable, hard-firing gate pulse

• Isolated low voltage compartmentprovides maximum protection foroperating personnel

• Mechanically interlocked medium voltagecompartment

AC

1007 – 2/99

4 ABB Control Inc.

Ordering informationType SSM

Discount schedule SSM

Ratings 1 Soft start with line start section Optional soft start only 2

Volts Max. Nominal Catalog List Catalog Listamps max. HP number price number price

200 650 SSM-23200-E-S SSM-23200-E2300 320 1250 SSM-23320-E-S 3 SSM-23320-E 3

600 2500 SSM-23600-E-S SSM-23600-E


600 3000 SSM-33600-E-S SSM-33600-E


600 5000 SSM-41600-E-S SSM-41600-E

6600/ 200 2500 SSM-66200-E-S SSM-66200-E

6900 400 5000 SSM-66400-E-S 3 SSM-66400-E 3

600 7500 SSM-66600-E-S SSM-66600-E

1 Contact factory for higher horsepower and voltage requirements.2 Must be used with customer supplied line start panel.3 Consult factory.

SSM-41200-E-S

SSM-41200-E

AC

100

7 –

2/99

ABB Control Inc. 5

Technical data

Type of loadThree phase medium voltage AC induction motors

AC supply voltage1000, 2300, 3300, 4160, 6600/6900 VAC+10% to -10%50/60 Hz line voltages

HP ratingsUp to 7500 HP @ 6900V (600 Amps max)

Overload ratings125% – Continuous500% – 60 Seconds

Power circuitSeries strings of SCR power modules (1,2,4 or 6 matched pairs ofSCRs per phase depending on voltage rating)

SCR peak inverse voltageLine voltage PIV rating

1000 35002300 7000

3300/4160 14,0006600/6900 21,000

Transient voltage protectiondv/dt circuits (1 per SCR power module)

Vacuum bypass contactorStandard on all models, line start rated

Ambient operating temperature0 to 50°C (32°F to 122°F)(Optional -20° to 50°C with heaters)

ControlDigital microprocessor controller with read-out in English textProgrammable in four languages(English, French, Spanish and German)Non-volatile memory for programming and faultsOpto-isolated inputs

CommunicationsRS485 with modbus RTU protocolRS485 with Windows interface

Auxiliary contactsFORM C8 Amps @ 250V

AdjustmentsMotor FLADual adjustments - Two independent settings for:

Initial voltage 10 – 95% of nominal voltageCurrent limit 100 – 500% of motor FLAAcceleration time 2 – 90 secondsDeceleration time 2 – 90 seconds

Decel - final torque 0 – 10% sensitivityPump control Four closed loop start and stop curvesPulse start 0.1 – 2.0 seconds @ 80% line voltageUnder voltage trip 70 – 90% (adjustable trip delay)Over voltage trip 110 – 125% (adjustable trip delay)Under current trip 20 – 90% of motor FLA (adjustable trip delay)Allowable re-starts 0 – 10 (adjustable time inhibit)

Motor and starter protectionElectronic overload Inverse time, 75 – 150% of motor FLAElectronic shear pin Trips within 1 cycle of setpointPhase loss One or more phases missingPhase sequence Phase sequency incorrectOver voltage Trips at high line setpointUnder voltage Trips at low line setpointStall protection Starting process is not completeShorted SCR Internal fault detectedError connection Internal fault/motor connectionStarter over-temp Heatsink over temperature

Line start sectionLoad break/fault make disconnect switch with automatic grounding armand viewing windowFuses with blown fuse indicatorIn-line vacuum contactorControl power transformer with fused primary/secondaryPackaged in common enclosure with soft startOptional "Soft Start" (requires customer supplied line start panel)

Statistical dataTotal amount of run time since soft start was resetAmount of time it took motor to start during last periodMaximum current during last start periodTotal number of starts since soft start was resetThe cause of the last faultPercentage of current at last tripTotal number of trips since soft start was reset

Elevation1000 m / 3300 ft. without derating (contact factory for higherelevations)

EnclosureNEMA 12, top and bottom entrance plates11 gauge steelASA #61 gray paint with lifting eyes

AC

1007 – 2/99

6 ABB Control Inc.

Approximate dimensions

A

B C

Soft start with line start section Optional softstart only

Model number A B C Model number A B C

SSM-23200-E-S 92 36 30 SSM-23200-E 92 36 30SSM-23320-E-S 92 36 30 SSM-23320-E 92 36 30SSM-23600-E-S 92 72 30 SSM-23600-E 92 36 30



SSM-66200-E-S 92 90 30 SSM-66200-E 92 60 30SSM-66400-E-S 92 90 30 SSM-66400-E 92 60 30SSM-66600-E-S Contact factory SSM-66600-E 92 60 30

AC

100

7 –

2/99

ABB Control Inc. 7

Terms and conditions

These terms and conditions govern all sales and shipments of control equipment products(including parts and accessories).ABB Control Inc. hereby gives notice of its objection to any different or additional terms andconditions except for such as may be expressly accepted by it in writing.

PricesPrices are subject to change without notice. Prices will be the prices in effect at the time ofshipment by ABB Control Inc. and include freight, prepaid and allowed to first destination in thecontinental United States. In the event of a price change, the effective date of the change will bethe date shown on the new price discount sheets. However, where a price change is made by letteror telegram, the effective date will be given as part of the announcement.

TaxesThe price does not include any Federal, state or local property, license, privilege, sales, use,excise, gross receipts or other like taxes which may now or hereafter be applicable. Payment byABB Control Inc. of any such taxes shall be for the account of purchaser.

Standard Terms of PaymentStandard terms of payment are according to the appropriate discount schedule (AC 5000 - AC5002).

Payment and Late ChargesABB Control Inc. may require full or partial payment in advance if, in its sole judgement, thefinancial condition of the purchaser, at any time prior to delivery, does not merit the terms ofpayment specified.

If shipments are delayed by the purchaser or by reason of any of the causes referred to in theparagraph entitled "Excusable Delay", payments shall become due from the date when ABBControl Inc. is prepared to make shipment. Products held for the purchaser as a result of suchdelay shall be at the risk and expense of the purchaser.

If the purchaser fails to pay any invoice when due, ABB Control Inc. may defer deliveries under thisor any other contract with purchaser, except upon prior receipt of satisfactory security foror cash in payment of any such invoice. Failure on the part of purchaser to pay invoices when dueshall at the option ofABB Control Inc. constitute a default under this contract.

A service charge, the lesser of the highest rate allowed by law or 11/2% per month, or fractionthereof, for a maximum charge of 18% per annum will be charged on all overdue accounts.

DeliveryDelivery of products shall be FOB point of shipment regardless of transportation costs being"allowed", "prepaid" or collect". Where the scheduled delivery of products and parts is delayed bythe purchaser or by reason of any of the causes referred to in the paragraph entitled ExcusableDelay, ABB Control Inc. may deliver such products by moving them to storage for the account ofand at the risk of the purchaser. Shipping dates are approximate and are based upon promptreceipt of all necessary information from purchaser. ABB Control Inc. reserves the right to makedelivery in installments.

Purchaser Pick-upNo allowance will be made in lieu of transportation charges if the purchaser accepts shipment atthe factory, warehouse or freight station. Transportation charges will not be deducted from thepurchase price.

Origin, Method of Shipment and RoutingABB Control Inc. shall determine the point of origin of shipment, the method of transportation andthe routing of shipment. Costs for shipment by means requested by purchaser different from ABBControl Inc.'s standard means of shipment are invoiced to the purchaser as a separate charge.

Freight charges will be added to the price of any order under $100.

Excusable DelayABB Control Inc. shall not be liable for loss, damage, detention or delay, nor be deemed to be indefault from causes beyond its reasonable control, including without limitation, fire, flood, strike orother labor difficulty, act or omission of any governmental authority or of the purchaser, insurrectionor riot, embargo, delays or shortage in transportation or inability to obtain necessary labor,materials or manufacturing facilities from usual sources.In the event of delay in performance due to any such cause, the date of delivery will be postponedby such length of time as may be reasonably necessary to compensate for the delay.

WarrantyABB Control Inc. warrants that on date of shipment to purchaser, the goods will be the kind andquality described herein, merchantable and free of defects in workmanship and material.

If within one year from date of initial operation, but not more than eighteen months from date ofshipment, should any failure to conform with this warranty appear within such time, ABB ControlInc. shall, if given prompt notice by purchaser, correct such nonconformity, at its option, either byrepair or replacement F.O.B. repair facility or by refund of the purchase price of the nonconformingproduct or part. Return of products to ABB Control Inc. pursuant to this paragraph shall be atpurchaser's risk and expense. The foregoing warranty is exclusive and in lieu of all other warrantiesof quality, expressed or implied, and all other warranties, including any warranty of merchantabilityor fitness for a particular purpose are hereby disclaimed.

Correction of nonconformities in the manner and for the period of time provided above shall bepurchaser's exclusive remedy and shall constitute fulfillment of all liabilities of ABB Control Inc.whether in warranty, strict liability, contract, negligence, tort or otherwise with respect to anynonconformance or defect in the product.

The foregoing warranty shall not apply to any product which has been: a) improperly repaired oraltered, b) subjected to misuse, misapplication, negligence or accident, c) used in a mannercontrary to manufacturer's directions.

Limitation of LiabilityABB Control Inc.'s liability to purchaser on any claim in connection with the product shall notexceed the purchase price of the product which gives rise to the claim.

IN NO EVENT SHALL ABB CONTROL INC. BE LIABLE FOR SPECIAL, INCIDENTAL ORCONSEQUENTIAL DAMAGES whether in warranty, contract, strict liability, tort, negligence orotherwise including but not limited to loss of profits or revenue, loss of use of the product or anyassociated product, cost of capital, cost of substitute products, facilities or services, downtimecosts or claims of customers of the purchaser for such or other damages.

Except as prohibited by law, all causes of action against ABB Control Inc. shall expire unlessbrought within one year of the time of accrual thereof. ABB CONTROL INC. NEITHER ASSUMESNOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER OR FURTHER LIABILITY THANAS SET OUT ABOVE.

Patent IndemnityABB Control Inc. will at its own expense defend any suit which maybe brought against the Purchaser based on a claim that any apparatus or part furnished undercontract constitutes an infringement of any United States letter patent (provided ABB Control Inc. isnotified promptly of such suit and copies of all papers therein are delivered to ABB Control Inc.),and ABB Control Inc. agrees to pay all judgements and costs recovered in any such suit and toreimburse the Purchaser for costs of expenses incurred in the defense of any such claim or suit. Incase said apparatus or any part is held to constitute infringement and the use of the apparatus orpart is enjoined, ABB Control Inc. shall at its own expense, either procure for the Purchaser theright to continue using the apparatus or part or replace it with non-infringing apparatus; or modify itso it becomes non-infringing, or remove the apparatus and refund the purchase price and thetransportation and installation cost thereof. The foregoing states the entire liability of ABB ControlInc. for patent infringement by apparatus or any part thereof.

Shipping loss or damageIn the event of shipping loss or damage: 1) Notification must be given to ABB Control Inc. within72 hours of delivery; 2) Written notice of apparent loss or damage must be made on the carrier'sdelivery receipt; and 3) Concealed damage must be immediately reported to the delivering carrierwith a request for inspection. Purchaser shall comply with the foregoing procedure whether or notABB Control Inc. has the risk of loss at the point of loss or damage to the shipment.

Title – risk of lossThe products sold hereunder shall remain the property ofABB Control Inc. and shall remain personal property until fully paid for in cash, and purchaseragrees, if requested by ABB Control Inc. to execute a further security agreement covering theproducts sold, and to perform all acts which may be necessary to perfect and assure retention oftitle to such products by ABB Control Inc. Not withstanding any agreement with respect to deliveryterms, risk of loss or damage shall pass to the purchaser and delivery shall be deemed to becomplete upon delivery to a private or common carrier or upon moving into storage, whicheveroccurs first, at the point of shipment.

TerminationAny order or contract may be terminated by the purchaser only on written notice and upon paymentof reasonable and proper termination charges, including without limitation, all costs identified to theorder of contract incurred by ABB Control Inc. up to the date of notice of termination and allcharges incurred by ABB Control Inc. in respect of the termination.

ReturnsIn no event will ABB Control Inc. be responsible for unauthorized return of products. Returns will beaccepted only at ABB Control Inc.'s option and subject to terms specified by ABB Control Inc.Authorization and shipping instructions for return of products must be obtained from ABB ControlInc. prior to return shipment. Product must be returned with proper identification. When a purchaserrequests authorization to return for his own reasons, the return is subject to a minimum restockingcharge of 20% for standard inventoried product and for any transportation paid by ABB ControlInc., both out and ingoing. Returns will be accepted up to 60 days after invoice date. Goodsreturned for purchaser's reason are subject to inspection and must be in good working condition,as new, and in original cartons.

Purchase ordersExcept as provided below, all orders must be in writing and show quantities and prices, completedescription (including catalog numbers) of products requested and mutually agreed delivery dates.

Verbal orders received via telephone or otherwise must be confirmed within 5 days either by mail,telex or the equivalent. Verbal orders with a purchase price over $5,000 will not be processed untilsuch written confirmation is received.

Unless otherwise agreed in writing, an addition to a previously entered order will be accepted onlyat then applicable prices, discount schedules, conditions of sale, etc.

Special quotationsSpecial quotations will automatically expire 30 days from issuance unless renewed in writing byABB Control Inc.

AssignmentAny assignment of this contract, or any rights hereunder, without prior written consent of ABBControl Inc. by a duly authorized representative thereof shall be void.

Partial invalidityIf any provisions herein or portions thereof conflict with any statute or rule of law of the jurisdictionof applicable law or wherein the contract may be sought to be enforced, then such provisions orportions thereof shall be deemed void to the extent that they may so conflict, but withoutinvalidating the remaining portions of such provisions or other provisions hereof.

RemediesThe remedies expressly provided for in the Conditions of Sale shall be in addition to any otherremedies which ABB Control Inc. may have under the Uniform Commercial Code or otherapplicable law.

Choice of lawThe construction and performance of this contract and the rights and remedies of the parties heretoshall be governed by the laws of the State of Texas.

AC

1007 – 2/99

8 ABB Control Inc.

VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489 CSAC22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN60947-2 BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660

Worldwide approvals ➀

➀ Approvals listed may not apply to products listed in this publication.

General informationStandard compliance and approvals

Within the European Union, EU, confor-mity of products and the proper applica-tion of the CE marking to machines andcontrol equipment is necessary for mar-keting electrical equipment. The intent isto ensure compliance with all relevantEU Directives.

ABB Low Voltage ApparatusABB is a global group serving custom-ers in electric power generation, trans-mission and distribution, industrial build-ing systems, and rail transportation. ABBLow Voltage Apparatus develops, pro-duces and markets low voltage productssuch as disconnect switches, contac-tors, starters, pushbuttons, soft starters,

arc guard sys-tems, relays,mini-contactors,manual motorstarters, IsomaxMCCBs, andMCBs. With sixmanufacturingunits within theEuropean

Union, we are ideally located to develop,manufacture and provide low voltageequipment to comply with the EU direc-tive.

BackgroundThe guarantee of free trade of goodswithin the Community is the most impor-tant objective. This will eliminate traderestrictions that result from differenttechnical regulations in each individualmember country. Harmonization of exist-ing European standards and regulations,is being accomplished and already par-tially realized. Based on this goal, a newconcept for creating directives wasformed in 1985 by the European Com-munity (EC) Commission to produce di-rectives with a wide range of applicationwhich contain only the most basic safetyrequirements.

The CE MarkThe CE mark is prescribed by law andassures the European free trade ofgoods. It is short for ”CommunautéEuropéen”, and is displayed on goodsand/or packaging which acts as an ex-ternal symbol for the inspection of prod-ucts. It also illustrates themanufacturer’s responsibility to upholdthe community’s directives.

The CE MarkABB´s commitment tothe directivesABB Low Voltage Apparatus producingcompanies will attach the CE mark inaccordance with the product directives.Our products will conform as follows:• Declarations of conformity for ABB

products will be available when re-quired by the relevant EU directives.

• Those products required to do so willbear CE marking as specified by therelevant EU directives and CE mark-ing regulations.

• Necessary technical documentationwill be on file and made available toauthorized organizations upon writtenrequest.

Industrial controls• Contactors• Drive contactors• Welding contactors• Overload relays• Starters, open & enclosed• Manual motor starters• Softstarters• Control relays• Pushbuttons• Miniature controls• Control circuit transformers• Sensors• Arc Guard systems

Circuit protectivedevices• Fusible disconnect switches• Non-fusible disconnect switches• Enclosed disconnect switches• Molded case circuit breakers• Miniature circuit breakers• Megamax & Emax power

circuit breakers (IEC)

Low VoltageNetwork QualityPower factor correction• Individual capacitors• Fixed capacitor banks• Automatic capacitor banksHarmonics correction• Anti-resonance capacitor banks• Filter banks• Dynacomp

L O W V O L T A G EN E T W O R K Q U A L I T Y

Product scope

ABB Control Inc.1206 Hatton Rd.Wichita Falls, TX 76302Tel. 888-385-1221

940-397-7000Fax 940-397-7001Email [email protected] www.abb.com/usa/abbcontrol

AC 1007February, 1999

softstarters type ssm medium voltage reliable solid...

Documents