soffio diffuser kit for solÀ prosem k · soffio diffuser kit for solÀ prosem k installation and...
TRANSCRIPT
SOFFIO DIFFUSER KIT
FOR SOLÀ PROSEM K
Installation and use instructions Cod.12765811EN
Rev- 05.01 – 09/02/2019
Startec S.r.l.
Viale Stazione, 26 - Fraz. Marignana
33079 Sesto al Reghena (PN) | Italia
Tel+39 0434 85001 | Fax +39 0434 85002
Mail [email protected] | www.startecitaly.com
Table of Contents
3 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
TABLE OF CONTENTS
TABLE OF CONTENTS .................................................................................... 3
1 INTRODUCTION ....................................................................................... 4
1.1 Overview ........................................................................................... 4
1.2 Information about this document ....................................................... 4
2 SECURITY ................................................................................................. 5
3 COMPOSITION ......................................................................................... 6
4 MOUNTING ............................................................................................... 7
4.1 Installers’ expertise............................................................................ 7
4.1 Mounting Execution ........................................................................... 7
4.1.1 Tools required for installation ........................................................ 7
4.1.1 Removal of the standard pipe ....................................................... 8
4.1.1 Mounting of the SOFFIO Diffuser .................................................. 9
4.1.1 Dismantling of SOFFIO Diffuser .................................................. 13
5 USE .......................................................................................................... 14
6 SPARE PARTS ........................................................................................ 15
Introduction
4 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
1 INTRODUCTION
1.1 Overview
The Startec SOFFIO Diffuser kit for Solà Prosem K (hereinafter, "SOFFIO
Diffuser") is an equipment specifically designed and manufactured to localize
microgranular products on a band wide some centimeters.
The SOFFIO Diffuser has been designed to be compatible with the Sola
precision seeder model Prosem K.
The SOFFIO Diffuser is patented (European patent No. 2893795, Italian patent
No. 1423249).
1.2 Information about this document
This document (hereinafter referred to as the "Instructions") includes the
explanations on how to mount the SOFFIO Diffusers on a Kuhn Maxima 2
precision seeder and the instructions for their use and maintenance.
The Instructions are delivered to the user jointly with the SOFFIO Diffuser.
It is important to make available the Instructions to the personnel in charge of
the installation to whom they are primarily addressed, and to store them in a
proper location.
The Instructions shall be carefully read.
The contents of the Instructions are property of Startec S.r.l. (hereinafter
“Startec”) and, unless specifically authorized by Startec itself in writing, any
reproduction, even partial, is prohibited.
Security
5 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
2 SECURITY
Read the instructions carefully and entirely before installing and using the
SOFFIO Diffuser.
The SOFFIO Diffuser is the end of a dosing and distribution system. Before
mounting it, check carefully that the SOFFIO Diffuser is compatible and that it
does not interfere with the correct functioning of all the other parts present. In
case of non-compatibility or doubt, please contact Startec or the machine
manufacturer's service department.
The Instructions must be read in advance and assimilated by the personnel in
charge of the installation. They shall be available during the mounting
operations.
If the information contained in the Instructions is not sufficiently clear or
exhaustive, you may contact Startec for servicing purposes.
Any use with products and for applications other than the original ones (see
Errore. L'origine riferimento non è stata trovata. above) is forbidden. Startec
declines any responsibility deriving from improper use or modifications made to
the SOFFIO Diffuser. The intended use is professional and in the agricultural
field.
While the machine is running, it is forbidden to install, clean or grease parts and
elements or to carry out any adjustment, maintenance and/or repair operation
on them. Do not modify or put out of service parts of the equipment or safety
devices.
It is the full responsibility of the operator to wear clothing which, in relation to
the nature of the operations and the characteristics of the equipment, does not
constitute a danger to personal safety or to third parties’ safety. Keep hair
gathered during work. Always use personal protection devices prescribed under
law rules in force.
For all installation and installation-related activities, you shall use only suitable
tools and well-kept equipment. The installation site must be appropriate and
safe for carrying out the operations. The precision seeder must be installed
correctly so as not to injure the operator.
Startec declines any responsibility deriving from or connected to the type of
microgranular product used and its effectiveness.
Composition
6 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
3 COMPOSITION
The SOFFIO Diffuser kit for Solà Prosem K is made up of::
a. one SOFFIO diffuser – code 87698275 (right element); code 87698277
(left element) – for each seeding element of the precision seeder on
which it is to be installed.
It is the buyer's responsibility to verify the integrity and conformity of the goods
received. If inconsistencies are detected, inform Startec immediately.
The SOFFIO Diffuser is composed of:
1. a stainless steel pipe with the bottom part specially designed and
shaped;
2. a plastic insert that allows the diffusion of the product;
3. plastic supports for fixing.
Each component is shown in detail in chapter 6 (Spare parts).
All material resulting from packaging or not used must be properly disposed of
in accordance with the applicable rules in force.
Mounting
7 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
4 MOUNTING
4.1 Installers’ expertise
The installation of the SOFFIO Diffuser must be carried out by installers experts
about the seeding machine on which it is to be applied (Solà model Prosem K
precision seeder).
The installers shall have gained expertise in mechanical applications. Startec
declines any responsibility deriving from or connected to an assembly not
carried out in accordance with the best practice. All applicable rules in force
must be applied.
4.1 Mounting Execution
The following assembly operations must be repeated for each seeding unit of
the Solà Prosem K precision seeder.
The SOFFIO Diffuser must be installed without having parts moving, being the
precision seeder and the tractor switched off and in safety. Carry out the
operations in a suitable and sufficiently lit place.
4.1.1 Tools required for installation
The following tools are required for mounting.
Wrench 10 Star screwdriver
Fig. 1 Wrench
Fig. 2 Star screwdriver
Mounting
8 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
4.1.1 Removal of the standard pipe
Remove the standard pipe (Solà) for the descent of the microgranules on each
element of the precision seeder (Fig. 3; nr. 1).
Fig. 3 Detail to be replaced
The necessary steps to perform this operation are the following.
1. Remove the flexible hose from the descent pipe (Fig. 4);
Fig. 4 Flexible hose deconnected
1
Mounting
9 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
2. using the 10 mm wrench, unscrew the two screws that secure the precision
seeder descent pipe (right and left side) (Fig. 5);
Fig. 5 screws to be removed
3. Remove the descent pipe from its seat (Fig. 6).
Fig. 6 Descent pipe removal
4.1.1 Mounting of the SOFFIO Diffuser
The installation foresees the mounting of the SOFFIO Diffusers to replace the
standard pipes previously removed.
Mounting
10 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
The left SOFFIO Diffusers will be mounted in the left elements of the seeder
being those that have the flexible hose at their left side ( Fig. 7), while the right
SOFFIO Diffusers in are to be mounted in the right elements of the seeder,
being those that have the flexible hose in the right side (Fig. 8).
Fig. 7 Left SOFFIO diffuser
Fig. 8 Right SOFFIO diffuser
1 Left diffuser pipe 1 Right diffuser pipe 2 Clamp 2 Clamp 3 Reducer 3 Reducer
3
2
1
2
3
2
2
1
Mounting
11 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
The necessary steps to perform this operation are the following.
1. Insert the reducer on the diffuser pipe (Fig. 9; nr. 1);
Fig. 9 SOFFIO Diffuser with reducer
2. insert the left diffuser pipe in the left element of the Solà Prosem K (flexible
hose the left) (Fig. 10);
Fig. 10 Mounting of SOFFIO Diffuser
1
2
Mounting
12 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
3. adjust the position of the SOFFIO Diffuser and lock the two right and left
fixing screws (Fig. 11);
Fig. 11 SOFFIO Diffuser placed
4. Connect the original hose for the microgranules descent to the Diffuser (Fig.
12Errore. L'origine riferimento non è stata trovata.) and secure it with
the appropriate clamps (Fig. 12 e Fig. 13).
Fig. 12 SOFFIO Diffuser mounted Fig. 13 SOFFIO Diffuser mounted
Mounting
13 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
To mount the right SOFFIO Diffuser on the Solà Prosem Kright elements –
flexible hose on the right – (Fig. 14 e Fig. 15), repeat the steps from 1 to 3.
Fig. 14 Right SOFFIO Diffuser
Fig. 15 Left SOFFIO Diffuser
ATTENTION
When the installation is completed, check that:
- there is no interference with the parts of the precision seeder and for the seeds distribution;
- the microgranular product is distributed in the desired
band of land as prescribed by the manufacturer/supplier.
Check frequently the correct functioning of the precision seeder
and of the SOFFIO Diffuser.
4.1.1 Dismantling of SOFFIO Diffuser
To dismantle the SOFFIO Diffuser, carry out the assembly operations
described above in reverse order.
Use
14 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
5 USE
The SOFFIO Diffuser has been designed, built and patented for the diffusion of
granular and microgranular products in agriculture. The manufacturer declines
any responsibility for different uses.
Check, at the end of the assembly and before each use that:
- the microgranular product is distributed in the desired band of land as
prescribed by the manufacturer / supplier;
- the correct functioning of the precision seeder;
- there is no interference between the SOFFIO Diffuser and the seederl and the
correct distribution of seeds, microgranules and any other products.
In case of problems or doubts, suspend the assembly and use of the SOFFIO
Diffuser and immediately inform the supplier of the SOFFIO Diffusers and
Startec, describing the situation.
Spare parts
15 PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved
6 SPARE PARTS
Right SOFFIO Diffuser code. 87698275
N° CODE DESCRIPTION
1 77769025 DIFF PIPE.RIGHT Prosem Ø15 INOX
2 68769012 DOWEL 30° DIFF.PIPE Ø15
3 57134213 SCREW AUTOF. TC+ 2,9X13 A2 DIN 7981
4 68768153 REDUCTION WASHING FROM Ø18 TO Ø15 PVC
5 53283322 SCREW CLAMP Ø22 h9 INOX-ZB
Left SOFFIO Diffuser code 87698277
N° CODE DESCRIPTION
1 77769027 DIFF. LEFT Prosem Ø15 INOX
2 68769012 DOWEL 30° DIFF.PIPE Ø15
3 57134213 SCREW AUTOF. TC+ 2,9X13 A2 DIN 7981
4 68768153 REDUCTION WASHING FROM Ø18 TO Ø15 PVC
5 53283322 SCREW CLAMP Ø22 h9 INOX-ZB
www.startecitaly.com
PROPRIETÀ DI STARTEC S.r.l. ID. IT01375690938 – Tutti i diritti riservati // All rights reserved