snap-on ya212aind spec sheet
DESCRIPTION
Snap-on YA212A INDUSTRIALM.I.G. COMBINATION UNIT, Fully capable welder, with accessories can be used to TIG weld and Aluminum welding.TRANSCRIPT
-
FORM WC5455
The latest technology in MIG welding equipment
EASY TO OPERATETurn on the shielding gas and main power switch, set the Heatand Wire Speed dials, and pull the trigger. That is all that isrequired of the operator of the YA212A INDUSTRIAL to per-form the majority of welding jobs.
The YA212A INDUSTRIAL can be used to produce high qualitywelds on steel, stainless steel, or aluminum. An OptionalMHG5-A Spool gun is available for welding aluminum.
SMOOTH ARC DESIGNA twelve position dial provides 12 voltage selections. Thetapped transformer, diode rectifier, capacitor bank design,produces the smooth arc required for welding on thin gauge, aswell as the amperage needed for welding heavier sections ofmaterial.
COMPACT DESIGNThe small size, light weight, sturdy running gear, and the 20 footpower input cable make the YA212A INDUSTRIAL the idealmachine for in-shop portability.
All controls are located on the front of the machine, to allow foreasy reading and adjustment.
INDUSTRIAL MIG TORCHThe industrial rated MIG torch is designed to give years ofdependable service. Its light weight, perfect balance, andpositive trigger control are especially appealing to the operator.The Zero Gas Loss feature is standard with Snap-On MIGtorches. This feature virtually eliminates expensive shieldinggas loss. The single line cable with unique single unit connectorattachment at the machine is one more plus, adding to theperfect machine.
ITEMS INCLUDED WITHTHE YA212A INDUSTRIAL
M.I.G. COMBINATION SYSTEM:
Combination Power Source / Wire Feeder Industrial Wheel Kit / Cylinder Rack Shielding Gas Regulator / Flowmeter 20 foot Power Input Cable 15 foot Work (Ground) Cable with Clamp MIG Torch with 10 foot Cable (.030 wire) .030 Steel Welding wire - Sample spool 230PK-1 Parts Kit
YA212A INDUSTRIALM.I.G. COMBINATION UNIT
Heavy Duty Unit for Frame Shops,Maintenance and Light Manufacturing
230 AMPS - 60% DUTY CYCLE TIG WELDS 12 GA. THRU 1/4" STEELS (NO ALUMINUM) COMPLETE UNIT IN A SINGLE CABINET .023 THROUGH .045 WIRE - ALL TYPES 30 - 250 AMP RANGE SPOOL GUN READY TWO YEAR WARRANTY (EXCEPT M.I.G. TORCH)
-
Snap-On Tools Corporation Kenosha, WI 53141-1410
OPTIONST.I.G. (GTAW) WELDINGDo you have a requirement for veryhigh quality welds? The YA212A IN-DUSTRIAL is easily converted to aT.I.G. Welder. Weld Steel, StainlessSteel, Chrome-Moly, Copper, Cast Iron- but WILL NOT WELD ALUMINUM.The YA212A INDUSTRIAL is capableof welding 12 gauge up to 1/4" thick-nesses. (available in 12 and 25 footcable lengths) PURE ARGON GAS ISREQUIRED FOR TIG WELDING.
TIG PACK 2112AOR
TIG PACK 2125A
SPECIFICATIONS FOR THE YA212A INDUSTRIAL
Power Input RequirementsVoltage 208/230 volts ACPhase single phaseFrequency 50/60 hertzCurrent 33/30 amps
Power OutputOpen Circuit Voltage 18 - 42 volts DCArc Voltage 14 - 30 volts DCWeld Current Range 30 - 250 ampsRated Output 230 ampsDuty Cycle 60%Duty Cycle Time Period 10 minutes
Electrode Wire CapacitySteel Wire .023 - .045 inchStainless Steel Wire .030 - .045 inchAluminum Wire (with MHG5-A) .025 - .047 inchBronze Wire .030 - .035 inchFlux Cored Wire .030 - .045 inchRecomended Wire Size .030 inch
Wire FeederWire Feed Speed Range 10 - 500 IPM
Shielding GasesSteel Wire CO2 or 75% ARGON-25% CO2Stainless Steel 98% ARGON-2% O2Aluminum, Bronze ArgonFlux Cored CO2 or 75% ARGON-25% CO2Flux Cored -gasless none (Straight Polarity)
MIG TorchNeck Angle 60 degreesOverall Length 10 feetCooling Method gasRating - Duty Cycle
with CO2 200 amps - 100% duty cyclewith Argon 150 amps - 100% duty cyclewith Argon 200 amps - 60% duty cycle
Warranty Period 30 days on MIG Torch
DimensionsHeight 34 inchesWidth 14-1/2 inchesDepth 35 inchesWeight 195 pounds
ALUMINUM WELDINGThe YA212A INDUSTRIAL is "SpoolGun Ready". The optional MHG5-Aspool gun plugs into the welder andyou are ready to weld. (The proper gasmust be hooked up) but nothing needsto be removed from the welder forchangeover to the spool gun. PUREARGON GAS IS REQUIRED FORALUMINUM WELDING. MHG5-A
RE5-A RANGE EXTENDERWIRE FEEDERA wire feed extension complete with25 foot cable assembly. Weld any-where - even on top of a truck.
FORM WC5455
RE5-A
TORCHPANELMOUNT
TORCHSELECTORCABLE
- TERMINAL(WORK)
"ON"INDICATORLIGHT
ON/OFFSWITCH
HEAT(VOLTAGE)SWITCH
VOLT-METER
WIRESPEED
+ TERMINAL(TORCH ORSPOOL GUN)