snap on 3000 · drilling distance (dd) r e v e a l m i n. (r) 3 456 0 12.3 1 12.3 2 12.3 3 12.3...
TRANSCRIPT
-
SNAP ON 3000 HINGE SERIES
Strength, functionality and reliability – SNAP ON 3000 is synonymous with durability.
SNAP ON 3000
-
3
Snap On 3000 Multi LockConvenient rapid assembly with simpleinstallation and removal.Snap On 3000 hinges with Multi Lock installation
technology are mounted to the door quickly and
securely. A quarter turn of the screws clockwise
expands and locks the 8mm dowels. The installation
technology is ideal for CNC-based manufacturers.
Snap On 3000Design solutions to meet every application
Snap On 3000 with UniSoftWhen the UniSoft door adapter is used in conjunction
with Snap On 3000 applications, loud door slamming
during closure becomes a thing of the past. The door is
gently braked and closes smoothly without a sound.
Snap On 3000 proven technology with a wideselection of application possibilities.The Snap On 3000 series is designed for a wide range
of door applications. Sturdy, reliable hinges for constant
daily use provide a well-rounded program. In this hinge
series, all individual load-bearing parts like pivot pins,
linkages, springs and screws are hardened and nickel-
plated. Snap On 3000 offers hinges for special
applications such as corner cabinets or blind corner
applications. Hinge fastening to the base mounting
plate is based on the reliable Snap On technology. The
hinge is positioned on the base plate and simply
snapped into place. Installation and removal can be
performed entirely without tools. Three dimensional
adjustment is integrated into the hinge arm and a single
screw is used for any desired adjustment.
-
Snap On 3000Product overview
Opening angle Drill hole Full overlay Half overlay Inset PageDescription
6Technical Information
35 mm
3703/3704
110°
8For standard doors• Up to 22mm door thickness• Self-closing and Free-swinging• Multi Lock hinge cup
35 mm
3803/3804
120°
10For standard doors• Up to 22mm door thickness• Self-closing• Multi Lock hinge cup
35 mm
3903/3904
165°
12For wide angle doors• Up to 22mm door thickness• Zero protrusion• Self-closing and Free-swinging• Multi Lock hinge cup
35 mm
3606/3608
95°
14Thick door hinge• Designed for profiled doors orthicker doors
• For door thickness up to 35mm
35 mm
3403/45°
95°
1645° Diagonal corner hinge• For angled corner cabinets• Up to 22mm door thickness
35 mm
3203/-45°
120°
18Negative 45° corner hinge• For angled corner cabinets• Up to 22mm door thickness
35 mm
3303
95°
20Blind corner hinge• For flush mount application• Up to 22mm door thickness
30 mm
3503/3505
100°
22Glass door hinge• 30 mm hinge cup• For tempered glass thicknesses 4to 7 mm
4
-
5
26Accessories• Spacer for wing base plates• Opening angle reduction clip
30Machinery
Opening angle PageDescription
24Snap On Base plates• Wing plates• Straight plates• Face Frame adapter plates
-
The reveal (R) is the distance that should beleft between two doors or between the door and
side wall of the cabinet to allow sufficient space
for opening the door. The required reveal width
(R) depends on the thickness of the door.
6
Number of hinges per door
Technical informationfor Snap On 3000
Reveal
Reveal for inset doorRequired reveal
The table shows the mini-
mum reveal for an inset
door, depending on the
drilling distance and base
plate height.
Example:A drilling distance of 4mm
results from using a base
plate with height 1.3 in a
reveal (R) of 1.5mm. This is
also called negative opening
action.
R (2x) R R
Full overlay door Half overlay door Inset door
The table shows the reveal
that should be left between
two doors or between door
and side wall to allow enough
space for opening the door.
Example:For a door thickness of
18mm and a drilling distance
of 5mm a reveal of 1.4mm is
needed.
Drilling distance (DD)
Doorthicknes
3 4 5
16 0.9 0.9 0.9
18 1.4 1.4 1.4
19 1.9 1.7 1.6
20 3.6 2.6 2.0
22 7.1 6.1 5.1
24 10.5 9.5 8.5
Reveal min. (R)
Drilling distance (DD)
Minimum
reveal(R)
3 4 5
0.5 1.3
1.5 1.3
2.5 1.3
Base plate height (BPH)
NoteReveal dimensions were determined with an edge radius (of the door) of
1mm. Hinge dimensions and calculation of reveal based on factory
setting. We recommend a trial mounting for all hinges and base plates.
Installation in millimeters is required. (Fractional inch equivalents as noted)
The number of hinges is determined by the door height, door weight,
quality of the material and the fixing of the cup and base plate.
The load and height data refer to 24” standard door widths.
Grass strongly recommends a trial mount for all hinges and base plates.
Attach base plates using all available screw holes.
Example:
For doors measuring 56” x 24” and weighing 19 lbs., Grass
recommends the installation of 3 hinges.
Note: The distance between the top and bottom hinge must be greater
than the width of the door.
The Snap On 3000 hinge meets and exceeds the minimum
requirements of ANSI/BHMA A156.9 Standard.
2 3 4 5
15 3020 45 60
35"
63"
56"
84"
96"
24"
24"
pounds
inches
-
7
Minimum gap – Drilling distance
Adjustments
The minimum gap is the gap be-tween the closed door and the front
of the cabinet.
The drilling distance is the dis-tance between the edge of the door
and the edge of the cup hole.
Example:For a door thickness of 19 mm and
a drilling distance of 5 mm the
minimum gap is 1.7 mm.
Drilling distance
Door overlay
Min
imum
gap
(fact
ory
sett
ing)
Drilling Distance (DD)
Doorthicknes(DT)
3 4 5
16 0.5 0.5 0.5
18 0.5 0.7 1.2
19 0.5 1.2 1.7
20 0.9 1.7 2.2
22 1.9 2.7 3.2
24 2.9 3.7 4.2
Minimum gap
Door edge protrusion Door overlay
The door edge protrusion is theamount by which the edge of the
open door protrudes into the open-
ing and varies depending on the
type of hinge and method of fixing.
It is stated on the respective
catalogue page and refers to the
stated base plate for the factory
setting. It can be changed by
changing the height of the base
plate and operating the lateral
adjustment.
Protrusion
The door overlay is thatpart of the cabinet side wall
or frame that is covered by
the door.
Example:For a hinge with a cranking
of 00, a base plate height of
4.3 and a drilling distance
of 4 mm, the door overlay is
14 mm.
Drilling distance (DD)
Dooroverlaymax.
3 4 5
18 1.3
17 1.3
16 1.3
15 4.3
14 4.3
13 4.3
12 9.3
10 9.3
Base plate height (BPH)
GRASS
GRAS
S
Door
Side
2
1
3
1
3
2
Standard hinges
Wide angle hinges
Blind corner hinges
All adjustment options are independent of one another.
Use a #2 POZI drive screwdriver for hinge adjustment.
Attach base plates using all available screw holes.
Height adjustment
±2 mm
Side adjustment
±2 mm
Depth adjustment
±2 mm
Subject to technical modifications without notice.
-
8 www.grassusa.com
Snap On 3703 / 3704110° hinge for standard doors
Full overlay Cranking 00 Multi Lock (VSM) Screw-on (VS) Dowelled (VS8)
• Opening angle 110°• Up to 22mm door thickness
• Self-closing and Free-swinging hingesavailable
• Integrated 3-dimensional adjustment inhinge arm
• 42mm boring pattern
Hinge cup: steelHinge arm:Zinc, nickel-plated
PU = packaging unit
Half overlay Cranking 08 Multi Lock (VSM) Screw-on (VS) Dowelled (VS8)
Hinge cup: steelHinge arm:Zinc, nickel-plated
Nickel plasticBlack plastic
Imprinting available upon special request
Cover cap for cranking 00 Item No. PU
12351-41 50
12350-41 50
Black plastic
Imprinting available upon special request
Cover cap for cranking 08 Item No. PU
55409-41 50
Item No. Item No. Item No. PU
Self-closing 28989-34 79839-34 70039-34 300
Free-swinging - - 11157-34 300
Item No. Item No. Item No. PU
Self-closing 28990-34 55411-34 55413-34 300
Free-swinging - - 55414-34 300
3703
3704
Installation in millimeters is required. (Fractional inch equivalents as noted)
-
Inset
Drilling distance (DD)
Dooroverlaymax.
9
NNootteeReveal dimensions were determined with an edgeradius (of the door) of 1mm.
Hinge dimensions and calculation of reveal withfactory setting.
IMPORTANT
To determine the correct application Grassstrongly recommends a trial mounting for allhinges and base plates.
Full overlay Half overlay Inset
Minimum gaps
Drilling pattern for screw-on Drilling pattern for Multi Lock Drilling pattern for dowelled Cup dimensions
Reveal
The minimum gap isthe gap betweenthe closed door andthe front of thecabinet.
min
. 12.
8
437
37
57
All dimensions in millimeters.
3 4 5 6 7
11 1.3
10 1.3
9 1.3 4.3
8 1.3 4.3
7 4.3
6 4.3
5 4.3
4 9.3
Base plate height (BPH)
Drilling distance (DD)Door thicknes (DT)
Drilling distance (DD)
Door thicknes (DT)
3 4 5 6 7
16 0.9 0.9 0.9 0.9 0.9
18 1.5 1.4 1.4 1.3 1.3
19 1.7 1.7 1.7 1.6 1.6
20 2.1 2.0 1.9 1.9 1.8
22 3.4 2.8 2.7 2.6 2.5
24 6.2 5.2 4.2 3.5 3.3
Reveal min. (R)
3 4 5 6 7
16 0.5 0.5 0.5 0.5 0.9
18 0.5 0.5 0.5 0.7 1.6
19 0.5 0.5 0.5 1.0 2.0
20 0.5 0.5 0.5 1.4 2.3
22 0.5 0.5 1.1 2.0 3.0
24 0.5 0.9 1.8 2.7 3.7
Minimum gap
Drilling distance (DD)
Door overlay max.
3 4 5 6 7
20 1.3
19 1.3
18 1.3
17 1.3 4.3
16 1.3 4.3
15 4.3
14 4.3
13 4.3
12 9.3
Base plate height (BPH)
Drawing with base plate, height 1.3 Drawing with base plate, height 1.3
Drilling distance (DD)
Reveal min. (R)
3 4 5 6
0 12.3
1 12.3
2 12.3
3 12.3
Base plate height (BPH)
Drawing with half-overlay hinge (cranking 08)and base plate, height 12.3
Subject to technical modifications without notice.
BPH BPHBPH
-
10 www.grassusa.com
Snap On 3803 /3804120° hinge for standard doors
• Opening angle 120°• Up to 22mm door thickness
• Integrated 3-dimensional adjustment in hinge arm
• 42mm boring pattern
PU = packaging unit
Full overlay Cranking 00 Multi Lock (VSM) Screw-on (VS) Dowelled (VS8)
Half overlay Cranking 08 Screw-on (VS) Dowelled (VS8)
Hinge cup: steelHinge arm: Zinc, nickel-plated
Cover cap for cranking 00
Item No. Item No. Item No. PU
Self-closing 28992-34 79840-34 70042-34 300
Item No. Item No. Item No. PU
Self-closing - 12634-34 12638-34 300
3803
3804
Installation in millimeters is required. (Fractional inch equivalents as noted)
Hinge cup: steelHinge arm: Zinc, nickel-plated
Nickel plastic Black plastic
Imprinting available upon special request
Item No. PU
12351-41 50
12350-41 50
Cover cap for cranking 08
Black plastic
Imprinting available upon special request
Item No. PU
55409-41 50
-
11
Drilling distance (DD)
Door overlay max.
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
Full overlay Half overlay
Minimum gaps Reveal
Drilling distance (DD)
Door overlay max.
Drilling distance (DD)
Door thicknes (DT)
The minimum gap is the gap betweenthe closed door and the front of thecabinet.
Drilling distance (DD)
Door thicknes (DT)
All dimensions in millimeters.
3 4 5
18 1.3
17 1.3
16 1.3
15 4.3
14 4.3 14
13 4.3
12 9.3
10 9.3
Base plate height (BPH)
3 4 5
9 1.3
8 1.3
7 4.3
6 4.3
5 4.3
Base plate height (BPH)
3 4 5
16 0.5 0.5 0.6
18 0.5 0.7 1.6
19 0.5 1.2 2.1
20 0.9 1.7 2.6
22 1.9 2.7 3.6
24 2.9 3.7 4.6
Minimum gap
3 4 5
16 0.9 0.9 0.9
18 1.5 1.4 1.4
19 1.9 1.7 1.6
20 3.6 2.6 2.0
22 7.1 6.1 5.1
24 10.5 9.5 8.5
Reveal min. (R)
Drilling pattern for screw-on Drilling pattern for Multi Lock Drilling pattern for dowelled Cup dimensions
Drawing with base plate, height 1.3 Drawing with base plate, height 1.3
min
. 12.
8
437
37
57
Subject to technical modifications without notice.
BPHBPH
-
12 www.grassusa.com
Snap On 3903 / 3904165° wide-angle hinge
• Opening angle 165°
• Up to 22mm door thickness
• Zero protrusion when door opened 90°using full overlay hinge
• Min. reveal 0 mm up to 22mm door thickness • Self-closing or Free-swinging hinges available• Integrated 3-dimensional adjustment in hinge arm
PU = packaging unit
Full overlay Cranking 00 Screw-on (VZ) Dowelled (VZ8)
Hinge cup: Zinc, nickel-plated
Hinge arm: Zinc, nickel-plated
Half overlay Cranking 08 Screw-on (VZ) Dowelled (VZ8)
Hinge cup: Zinc, nickel-plated
Hinge arm: Zinc, nickel-plated
3903
3904
Installation in millimeters is required. (Fractional inch equivalents as noted)
Item No. Item No. PU
Self-closing 90110-33 09897-33 150
Free-swinging - 11154-33 150
Item No. Item No. PU
Self-Closing 18503-33 18504-33 150
Cover cap for cranking 00 and 08
Black plastic
Imprinting available upon special request
Item No. PU
89271-41 50
Opening angle reduction to 135°
For 165°wide-angle hinges.
Prevents doors from colliding with fronts
or walls in corner installations.
Black plastic
➀ Height Adjustment .......+/-2mm➁ Side Adjustment ....+/-2mm➂ Depth Adjustment .. +/-2mmNote: Use a #2 POZIdrive screwdriverfor hinge adjustment.Fastening Screws #6 x 5/8" FHPItem No. PU
11590-42 100
Opening angle reduction clip for 135° Adjustments
135∞
Door
Side
2
1
3
1
3
2
VST-3903
-
13
Drilling distance (DD)
Door overlay max.
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
Full overlay Half overlay Inset
Minimum gaps Reveal
Drilling distance (DD)
Door overlay max.
Drilling distance (DD)
Door thicknes (DT)
The minimum gap is the gap betweenthe closed door and the front of thecabinet.
Drilling distance (DD)
Door thicknes (DT)
All dimensions in millimeters.
Use a half-overlay hinge (cranking 08), a drillingdistance of 3mm and a base plate height 12.3for an inset application.
3 4 5 6 7 8 9 10
23 1.3
22 1.3
21 1.3
20 1.3 4.3
19 1.3 143 4.3
18 1.3 4.3
17 1.3 4.3
16 1.3 4.3
15 4.3 9.3
14 4.3 9.3
13 4.3 Base plate height (BPH)
3 4 5 6 7 8 9 10
13 1.3
12 1.3 4.3
11 1.3 4.3
10 1.3 4.3
9 1.3 4.3
8 1.3 4.3
7 4.3 9.3
6 4.3 9.3
5 4.3 9.3
Base plate height (BPH)
3 4 5 6 8 10
16 0.5 0.5 0.5 0.5 0.5 0.5
18 0.5 0.5 0.5 0.5 0.5 0.5
19 0.5 0.5 0.5 0.5 0.5 0.5
20 0.5 0.5 0.5 0.5 0.5 0.5
22 0.5 0.5 0.5 0.5 0.5 0.5
23 0.5 0.5 0.5 0.5 0.5 0.5
24 0.5 0.5 0.5 0.5 0.5 0.5
Minimum gap
3 4 5 6 7 8 9 10
16 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
18 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
19 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
20 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
22 0.3 0.3 1.1 2.8 2.6 2.0 1.3 0.8
24 8.6 7.7 6.7 5.7 4.7 3.9 3.2 2.6
Reveal min. (R)
Drilling pattern for screw-on Drilling pattern for dowelled Cup dimensions
min
. 12.
8
437
37
57
Subject to technical modifications without notice.
BPHBPHBPH
-
14 www.grassusa.com
Snap On 3606 / 360895° profiled door hinge for doors up to 35 mm thick
• Opening angle 95°
• Door thickness max. 35mm (with a door edge radius of 1 mm)
• For door thickness over 25mm (1”) door must be beveled
• Integrated 3-dimensional adjustment in hinge arm
PU = packaging unit
Full overlay Cranking 00 Screw-on (VZ) Dowelled (VZ8)
Hinge cup: Zinc, nickel-platedHinge arm: Zinc, nickel-plated
Inset Cranking 18.5 Screw-on (VZ) Dowelled (VZ8)
Hinge cup: Zinc, nickel-platedHinge arm: Zinc, nickel-plated
3606
3608
Installation in millimeters is required. (Fractional inch equivalents as noted)
Item No. Item No. PU
Self-closing 18481-34 18482-34 300
Item No. Item No. PU
Self-closing 18483-34 18484-34 300
Black plastic
Imprinting available upon special request
Cover cap for cranking 08 Item No. PU
55409-41 50
Black plastic
Imprinting available upon special request
Cover cap for cranking 18.5 Item No. PU
12353-41 50
-
15
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
Full overlay
Minimum gaps Reveal
Inset
Drilling distance (DD)
Reveal (R)
Drilling Distance (DD)
Door thicknes (DT)
The minimum gap is the gap betweenthe closed door and the front of thecabinet.
Drilling Distance (DD)
Door thicknes (DT)
All dimensions in millimeters.
Drilling distance (DD)
Door overlay max.
3 4 5
15 1.3
14 1.3
13 1.3
12 4.3
11 4.3
10 4.3
9
8
7 9.3
6 9.3
5 9.3 Base plate height (BPH)
3 4 5
1
1.5 1.3
2
2.5 1.3
3 4.3
Base plate height (BPH)
3 4 4.5
16 - 25 0.0 0.0 0.0
26 - 27 0.1 0.1 0.1
28 0.7 0.2 0.2
29 1.8 0.8 0.4
30 2.9 1.9 1.4
31 4.0 3.0 2.5
32 5.0 4.0 3.5
33 6.1 5.1 4.6
34 7.2 6.2 5.7
35 8.3 7.3 6.8
Reveal min. (R)
Drilling distance (DD)
Door overlay max.
3 4 5
7 9.3
6 9.3
5 9.3
4 12.3
3 12.3
2 12.3 Base plate height (BPH)
Drilling pattern for screw-on Drilling pattern for dowelled Cup dimensions
42 42
Door profiles
Use an overlay hinge (cranking 00), a drilling distance of3mm and a base plate height 9.3 for a half-overlayapplication.
25∞
25 35
Drawing withbase plate,height 1.3
Drawing with base plate, height 9.3
Drawing with base plate, height 1.3
Half overlay
min
. 12.
8
437
37
57
3 4 4.5
16 1.6 2.6 3.1
18 1.8 2.7 3.2
19 1.8 2.8 3.3
20 1.9 2.9 3.4
22 2.1 3.1 3.6
24 2.3 3.3 3.8
26 2.4 3.4 3.9
28 2.6 3.6 4.1
30 2.8 3.8 4.3
32 3.0 4.0 4.5
34 3.1 4.1 4.6
35 3.2 4.2 4.7 Minimum gap
Subject to technical modifications without notice.
BPHBPHBPH
-
Hinge cup: Zinc, nickel-platedHinge arm: Zinc, nickel-plated
3403 / 45°
Diagonal Corner Screw-on (VZ) Dowelled (VZ8)
Item No. Item No. PU
Self-closing 16380-33 16382-33 150
Nickel plastic Black plastic
Imprinting available upon special request
Cover cap for cranking 00 Item No. PU
12351-41 50
12350-41 50
16 www.grassusa.com
Snap On 3403/45°+45° diagonal corner cabinet hinge, half overlay
• For 45° angle corner cabinets• Opening angle 95°• Door thickness max. 22mm• Integrated 3-dimensional adjustment in hinge arm
PU = packaging unit
Installation in millimeters is required. (Fractional inch equivalents as noted)
-
17
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
RevealDrilling distance (DD)
Door thickness (DT)
3 4 5 5.5
16 0.4 0.3 0.2 0.2
18 0.6 0.5 0.3 0.3
19 0.7 0.6 0.4 0.4
20 0.9 0.7 0.6 0.5
22 3.3 2.5 1.8 1.4
24 7.3 6.6 5.9 5.5
Reveal min. (R)
All dimensions in millimeters.
Drilling pattern for screw-on Drilling pattern for dowelled Cup dimensions
45° Corner Application
min
. 12.
8
437
37
57
Minimum gaps
The minimum gap is the gap betweenthe closed door and the front of thecabinet.
Drilling distance (DD)
Door thickness (DT)
3 4 5 5.5
16 0.0 0.0 0.0 0.0
18 0.0 0.0 0.0 0.0
19 0.0 0.0 0.0 0.0
20 0.0 0.0 0.0 0.0
22 0.0 0.0 0.0 0.0
23 0.5 0.5 0.4 0.4
24 1.3 1.2 1.2 1.2
Minimum gap
Subject to technical modifications without notice.
BPH
Drawing with base plate, height 4.3
-
Hinge cup: Zinc, nickel-platedHinge arm: Zinc, nickel-plated
3203 / -45°
-45° Diagonal Corner Screw-on (VZ) Dowelled (VZ8)
Item No. Item No. PU
24182-34 24181-34 300
Nickel plastic Black plastic
Imprinting available upon special request
Cover cap for cranking 00 Item No. PU
12351-41 50
12350-41 50
PU = packaging unit
Snap On 3203-45° angle corner cabinet hinge
• For -45° angle corner cabinets• Opening angle 120°• Door thickness max. 22mm• Integrated 3-dimensional adjustment in hinge arm
18 www.grassusa.comInstallation in millimeters is required. (Fractional inch equivalents as noted)
-
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
Reveal Drilling distance (DD)
Door thicknes (DT)
3 4 5
16 0.7 0.7 0.6
18 1.1 1.1 1.0
19 2.3 1.3 1.3
20 4.0 3.0 2.0
22 7.5 6.5 5.5
Reveal min. (R)
All dimensions in millimeters.
Drilling pattern for screw-on Drilling pattern for dowelled Cup dimensions
Minimum gaps
The minimum gap is the gap betweenthe closed door and the front of thecabinet.
Drilling distance (DD)
Door thicknes (DT)
3 4 5
16 0.0 0.6 1.5
18 0.7 1.6 2.5
19 1.2 2.1 3.0
20 1.7 2.6 3.5
22 2.7 3.6 4.5
Minimum gap
Overlay
19
Inset
min
. 12.
8
437
37
57
Subject to technical modifications without notice.
Drawing with base plate, height 1.3 For an inset application use a drilling distance of 3.5mm and baseplate, height 4.3.
BPH BPH
-
Description Item No. PU
3303/4.3/6.8/14 55677-41 50
Hinge cup: Zinc, nickel-platedHinge arm: Zinc, nickel-plated
3303
Inset Screw-on (VZ) Dowelled (VZ8)
Item No. Item No. PU
Self-closing 11511-33 11606-33 150
Nickel plastic Black plastic
Imprinting available upon special request
Cover cap for cranking 00 Item No. PU
12351-41 50
12350-41 50
20 www.grassusa.com
Snap On 3303 95° blind corner hinge
• For flush mounting on blind corner applications• Opening angle 95°• Door thickness max. 22mm• Integrated 3-dimensional adjustment in hinge arm
PU = packaging unit
Base plate for blind corner hinge Screw on
• Zinc, nickel-plated
• For wood screws
• 14mm setback distance
• Line boring 32mm
Description Item No. PU
3303/4.3/5.2/14 11704-41 50
Base plate for blind corner hinge For Euro screws
• Zinc, nickel-plated
• For Euro screws
• 14mm setback distance
• Line boring 32mm
14
323.5
14
326
Installation in millimeters is required. (Fractional inch equivalents as noted)
-
RevealDrilling distance (DD)
Door thicknes (DT)
3 4 5 5.5
16 0.5 0.5 0.5 0.5
18 0.5 0.5 0.5 0.5
19 0.5 0.5 0.5 0.5
20 0.9 0.8 0.8 0.7
22 2.3 2.0 1.7 1.6
Reveal min. (R)
21
All dimensions in millimeters.
Adjustments
Drilling pattern for screw-on Drilling pattern for dowelled Cup dimensions
GRAS
S
All adjustment options are independent of one another.
Use a #2 POZI drive screwdriver for hinge adjustment.
Height adjustment
±2 mm
Side adjustment
±2 mm
Depth adjustment
±2 mm
min
. 12.
8
437
37
57
Subject to technical modifications without notice.
NoteReveal dimensions were determinedwith an edge radius (of the door) of1mm.
Hinge dimensions and calculation ofreveal with factory setting.
IMPORTANT
To determine the correctapplication Grass stronglyrecommends a trial mounting forall hinges and base plates.
Baseplate
BP
H
Inset
-
Hinge cup: Black, plasticHinge arm: Zinc, nickel-plated
3503
Full overlay Cranking 00
Item No. PU
Self-closing 50110-34 300
Nickel plastic Black plastic
Imprinting available upon special request
Cover cap for cranking 00 Item No. PU
12351-41 50
12350-41 50
Hinge cup: Black, plasticHinge arm: Zinc, nickel-plated
3505
Inset Cranking 18.5
Item No. PU
Self-closing 50111-34 300
Black plastic
Imprinting available upon special request
Cover cap for cranking 18.5 Item No. PU
12353-41 50
Snap On 3503 / 3505 100° glass door hinge
• Glass door hinge, 30mm cup• For glass thicknesses of 4 to 7 mm• Opening angle 100°• Integrated 3-dimensional adjustment in hinge arm• Decorative cover plate available• Not suitable for stained glass
Material ABS, bright finish.
22 www.grassusa.com
Decorative cover plate
Color Item No. PU
nickel 83585-41 50
Screws (2 per cover plate) 708.310.31.9711 250
PU = packaging unit
Installation in millimeters is required. (Fractional inch equivalents as noted)
-
Drawing with base plate, height 1.3 Drawing with with full overlay hinge (cranking 00) andbase plate, height 9.3
Drawing with base plate, height 1.3
Full overlay Half overlay
Dimensions
Inset
All dimensions in millimeters.
Attaching the hinge cup:
use screws Ø 2.9 x 11mm
(Order screws separately)
Drilling distance (DD)
Reveal (R)
Drilling distance (DD)
Door overlay max.
6
17 1.3
14 4.3
9 9.3
6 12.3
Base plate height (BPH)
6
2 1.3
5 4.3
Base plate height (BPH)
Drilling distance (DD)
Door overlay max.
6
9 9.3
6 12.3
Base plate height (BPH)
23
Hinge dimensions and calculation of reveal with factory setting.
IMPORTANT
To determine the correct application Grassstrongly recommends a trial mounting for allhinges and base plates.
Not suitable for stained glass
Subject to technical modifications without notice.
Note: For tempered glass, drilling distance mustbe 1 1/2 times the glass thickness. Therefore, maximum thickness for tempereddoors is 4mm (5/32”)
BPH BPH BPH
-
24 www.grassusa.com
Snap On 3000 Base plates
Wing Base plate For wood screws
• G3/RZ x/5.2/37
• Zinc die cast
• For use with wood screws
• 37mm setback distance
• Line boring 32mm
• Attach with # 6x5/8” FHP
• G3/RZ x/6.8/37
• Zinc die cast
• For use with Euro screws
• 37mm setback distance
• Line boring 32mm
• Attach with 13mm Euro screws
Wing Base plate For Euro screws
32
37
32
17
3.5
All adjustments are independent of one another.
Use a #2 POZI drive screwdriver for hinge adjustment.
Attach base plates using all available screw holes.
Height adjustment
±2 mm
Side adjustment
±2 mm
Depth adjustment
±2 mm
Wing Base plate With pre-mounted Euro screws
• G3/RZ x/ES/37
• Zinc die cast
• For use with pre-mounted
Euro screws
• 37mm setback distance
• Line boring 32mm
32
37
32
17
Straight Base plate For wood screws
• G3/AZ x/5.2
• Zinc die cast
• For use with wood screws
• Attach with # 6x5/8” FHP 17
5.2
32
Height (x) Item No. PU Item No. PU
1.3 - - 10761-21 1000
4.3 10765-41 50 10765-21 1000
9.3 10769-41 50 10769-17 500
12.3 - - 30533-52 300
20.0 - - 30535-52 300
GRASS
32
37
326
17
Height (x) Item No. PU Item No. Bulk PU
1.3 10759-41 50 10759-21 1000
4.3 10763-41 50 10763-53 500
9.3 10767-41 50 10767-17 500
12.3 - - 30532-52 300
20.0 - - 30534-52 300
Height (x) Item No. PU Item No. PU
1.3 10717-41 50 10717-54 1000
4.3 60174-41 50 60174-54 1000
9.3 12355-41 50 12355-53 500
Height (x) Item No. PU Item No. PU
1.3 12643-41 50 12643-21 1000
4.3 10191-53 500 10191-21 1000
9.3 17672-41 50 17672-17 500
Installation in millimeters is required. (Fractional inch equivalents as noted)
PU = packaging unit
-
25
All adjustment options are independent of one another.
Use a #2 POZI drive screwdriver for hinge adjustment.
Attach baseplates using all available screw holes.
Height adjustment
±2 mm
Side adjustment
±2 mm
Depth adjustment
±2 mm
Straight Base plate With pre-mounted dowels
• G3/DZK x/17
• Zinc, nickel-plated
• With pre-mounted dowels
for automatic insertion
12 32
17
ø 10
GRASS
Height (x) Item No. PU
1.3 10721-21 1000
9.3 11519-53 500
Face Frame Adapter For wood screws
• Face Frame Adapter FFA
• 4.3 and 7.3 mm heights
• Zinc, nickel-plated
• Attach with 2 x #6 x 5/8” FHP
Height (x) Item No. PU Item No. PU
4.3 69238-41 50 69238-52 300
7.3 13160-41 50 13160-52 300
Height (x) Item No. PU
1.3 39183-48 300
9.3 39184-48 300
Face Frame Adapter with lip For wood screws
• G3/FFAL 2.6 mm
• Zinc, nickel-plated
• For maximum holding
strength baseplate must be
attached with 4 x #6 x 5/8” FHP screws
Height (x) Item No. PU Item No. PU
2.6 13158-41 50 13158-52 300
Face Frame Adapter for inset For wood screws
• G3/FFA/Inset x mm• Zinc, nickel-plated• Attach with 2 x #6 x 3/4” FHPscrews. A third hole is availablethat will accept a#6 x 3/4” RHP screw.
Subject to technical modifications without notice.
Snap On 3000 Base plates
x
• 1.3 height FFA Inset to be used with a half overlay (cranking 08) hinge
• 9.3 height FFA Inset to be used with an overlay (cranking 00) hinge
PU = packaging unit
-
26 www.grassusa.com
7.5° Spacer wedge
AccessoriesFor Snap On 3000 hinges
Spacer for wing base plates, 3mm
Item No. PU
13462-41 50
Item No. PU
38314-41 50
3.0
Installation in millimeters is required. (Fractional inch equivalents as noted)
Overlay Application Solution 97.5°
With 1 Spacer Wedge
Overlay Application Solution 105°
With 2 Spacer Wedges
Inset Application Solution 97.5°
With 1 Spacer Wedge
Inset Application Solution 105°
With 2 Spacer Wedges
PU = packaging unit
-
27
Opening angle reduction to 95°
For 110°standard door hinges.
Prevents doors from colliding with fronts
or walls in corner installations.
Black plastic
Opening angle reduction to 135°
For 165°wide-angle hinges.
Prevents doors from colliding with fronts
or walls in corner installations.
Black plastic
Item No. PU
80149-41 50
Item No. PU
11590-42 100
Opening angle reduction clip for 95°
Opening angle reduction clip for 135°
95∞
135∞
Description Item No. PU
13mm Euro Screw (1/2”) 81015-43 500
18mm Euro Screw (11/16”) 83000-43 500
7.5mm Euro Screw (5/16”) 83001-43 500
13mm Pan head Euro Screw 13398-43 500
Euro screw, nickel-plated
Screws
Ø 6
.3
Length Ø 7.1
Description Item No. PU
#6 x 1/2” FHP, NI 81014-43 500
#6 x 7/16” FHP, NI 81016-43 500
#6 x 5/8” FHP, NI 81001-43 500
#6 x 3/4” FHP, NI 81003-43 500
#6 x 1” FHP, NI 81004-43 500
Wood screw, nickel-plated
Ø 3
.5
Length Ø 7
Subject to technical modifications without notice.
Dowels
Description Item No.10mm dowel for baseplate 84902-438mm dowel for VZ hinge cup 04885-438mm dowel for VS hinge cup 00102-43
Pozidrive screwdriver for hinges Description Item# PU
Pozidrive screwdriver 98000-08 50
Pozidrive screwdriver
PU = packaging unit
-
Description Item No. PU
H-950 clear, door stop 00068-43 500
Door Stops
Description Item No. PU
Self-adhesive bumper, clear 12.5 mm x 2.5 mm [1/2” x 3/32”] 630.000.02.1250 5000
Self-adhesive bumper, clear 10 mm x 3 mm [3/8” x 1/8”] 630.000.03.1050 1000
Self-adhesive bumper, clear 7 mm x 1.5 mm [1/2” x 1/16”] 630.000.03.0750 1000
Door Bumpers
Dowels
Description Item No. PU
AirSoft Bumper Pad, clear 12 mm x 5 mm [15/32” x 3/16”] 63481-43 500
AirSoft Bumper Pad, clear 12 mm x 5 mm [15/32” x 3/16”] 63483-30 5000
Description Item No. PU
AirSoft Bumper Pad, clear 9.5 mm x 2.5 mm [3/8” x 1/8”] 63480-99 480
AirSoft Bumper Pad, clear 9.5 mm x 2.5 mm [3/8” x 1/8”] 63482-30 5000
Description Item No. PU
Bumper Pad, clear 11 mm x 3 mm [7/16” x 1/8”] 31002-43 500
Bumper Pad, clear 11 mm x 1.6 mm [7/16” x 1/16”] 31004-43 500
D
H
12 mm(15/32”)
5 mm(3/16”)
11 mm(7/16”)
3 mm(1/8”)
9.5 mm(3/8”)
2.5 mm(1/8”)
11 mm(7/16”)
1.6 mm(1/16”)
12 mm(15/32”)
5 mm(3/16”)
11 mm(7/16”)
3 mm(1/8”)
9.5 mm(3/8”)
2.5 mm(1/8”)
11 mm(7/16”)
1.6 mm(1/16”)
Description Item No. PU
10 mm dowel for baseplate 05404-43 500
8 mm dowel for VZ hinge cup 04885-43 500
8 mm dowel for VS hinge cup 00102-43 500
5 mm dowel without screws 522.000.18.1350 500
12 mm(15/32”)
5 mm(3/16”)
11 mm(7/16”)
3 mm(1/8”)
9.5 mm(3/8”)
2.5 mm(1/8”)
11 mm(7/16”)
1.6 mm(1/16”)
AccessoriesFor Snap On 3000 hinges
28 www.grassusa.comInstallation in millimeters is required. (Fractional inch equivalents as noted)
PU = packaging unit
-
Shelf Supports
35mm Cover Cap
Description Item No. PU
Plastic, clear, steel pin 499.582.50.0050 5000
Description Item No. PU
Metal spoon, nickel plated 499.582.50.2050 2000
Description Item No. PU
Diecast, nickel plated 517.206.64.1015 2500
Description Item No. PU
Nickel plated 517.206.61.0015 2500
Description Item No. PU
H-802 plastic, clear, square 00036-43 500
54.5
8
54.5
8
9 10
5
7
54.5
8
54.5
8
9 10
5
7
54.5
8
54.5
8
9 10
5
7
Description Item No. PU
35 mm cover cap, white 22227-42 100
35 mm cover cap, almond 22228-42 100
35 mm cover cap, brown 22229-42 100
Ø 35 mm
54.5
8
54.5
8
9 10
5
7
54.5
8
54.5
8
9 10
5
7
29Subject to technical modifications without notice.
PU = packaging unit
-
EcopressDrilling and insertion machine for 42 mm boring pattern
• Bore depth automatically adjusts to material thickness• Functional design• Accurate fence is easily adjusted• Chip removal by air on pneumatic machines• Easy, fast and efficient operation• Easy maintenance• 42 mm boring pattern
Pneumatic controlPneumatic feed and pneumatic
hold-down device.
Hold-down blockOptimum fixing on the Ecopress
Pneumatic with the pneumatic
hold-down device.
Scale barGraduated scale for exact
measurement on the machine.
30 www.grassusa.com Dimensions in millimeters, fractional inch equivalents as noted.
-
Subject to technical modifications without notice. 31
Carbide drill bits for Ecopress
Diameter Direction Item no. PU
35 mm RH 00077-01 1
8 mm LH 00160-01 1
Bit set for hinge drilling Item no. PU
1 x 35 mm/RH, 2 x 8 mm/LH 00213-01 1
Extension bars and line boring guide for use with Ecopress
Type From/ Up to Item no. PU
Type 1 360 mm - 1360 mm 37535-01 1
Type 2 1360 mm - 2350 mm 37536-01 1
Line boring guide 13967-01 1
Additional stops for Ecopress
Type Item no. PU
Left 89610-01 1
Right 89510-01 1
Raised panel stop 00292-01 1
Insertion dies for Ecopress
Insertion die for 110/125 hinges Item no. PU
3703/3803 Insertion die 90282-01 1
Insertion die for 165 hinges Item no. PU
3903 Insertion die 37552-01 1
PU = packaging unit
-
01874-01S3B-11/12-MAP
-3M
Grass America Inc.1202 NC Highway 66 SouthKernersville, NC 27284
Phone 1-800-334-3512 Fax 1-800-525-8406
Internet: www.grassusa.com E-Mail: [email protected]
Grass Canada Inc.475 Finchdene Square, Unit 9Toronto, ON M1X 1B7
Phone 1-800-461-4975Fax 1-416-335-5907
Internet: www.grasscanada.com E-Mail: [email protected]