_____________________________________________________________smoke programs and options north...

1

_____________________________________________________________SMOKE Programs and Options

North Carolina Supercomputing Center__________________________Environmental ProgramsMCNC

SMOKE Programs and Options

Smkinven Rawbio Grdmat Spcmat Cntlmat Premobl Emisfac

Elevpoint Temporal Tmpbio Laypoint Smkmerge Grwinven Mrggrid

2



Smkinven (1)

Imports area, mobile, or point source inventories Inputs

– Inventory file(s) ARINV | MBINV | PTINV– Day-specific file(s) PTDAY– Hour-specific file(s) PTHOUR– Gridded inventory file AG– VMT Mix file for EMS-95 intputs VMTMIX– Time zones COSTCY– Mobile codes MCODES– Replacement stack parameters PSTK– Valid activities ACTVNAMS – Valid pollutants SIPOLS

4



Smkinven (3)

Major settings– SMK_SOURCE: [A | M | P] sets source category– DAY_SPECIFIC_YN: Y = import day-specific data– HOUR_SPECIFIC_YN: Y = import hour-specific data– IMPORT_AVEINV_YN: Y = import inventory– RAW_DUP_CHECK: Y = error for duplicate records– VELOC_RECALC: Y = recalculate stack velocity from

flow– WEST_HSPHERE: N = do not convert coordinates– WKDAY_NORMALIZE: Y = use weekday to normalize weekly

profile

5



Rawbio

Imports county or gridded land use data Inputs

– County land use data BCUSE– Gridded land use data BGUSE– BEIS2 emission factors BFAC– Gridding surrogates BGPRO– Grid description file G_GRIDPATH

Outputs– Gridded, normalized emissions BGRD

Major settings– Environment variables for the gridding surrogate to use for each

major landuse type (e.g., PINE_SURG, DECD_SURG)

6



Grdmat (1)

Creates area, mobile, or point source gridding matrix and mobile ungridding matrix

Inputs– SMOKE I/O API inventory file AREA | MOBL | PNTS– SMOKE ASCII inventory file ASRC | MSRC | PSRC– Gridding cross-reference AGREF | MGREF– Gridding surrogates AGPRO | MGPRO– Grid description file G_GRIDPATH– Mobile codes MCODES

7



Grdmat (2)

Outputs– Gridding matrix AGMAT | MGMAT | PGMAT– Ungridding matrix

MUMAT– Supplemental information AGSUP | MGSUP |

PGSUP

Major settings– REPORT_DEFAULTS: N = does not report when default

surrogates are used– SMK_SOURCE: [A | M | P] sets source category– SMK_DEFAULT_SRGID: Number sets fallback surrogate

for case of zero emissions because of

surrogate setting

8



Spcmat (1)

Creates area, mobile, or point source speciation matrix for mass-based and/or mole-based factors

Inputs– SMOKE I/O API inventory file AREA | MOBL | PNTS– SMOKE ASCII inventory file ASRC | MSRC | PSRC– Speciation profiles

GSPRO– Speciation cross-reference

GSREF– Pollutant conversion file GSCNV– Mobile codes MCODES– Mobile emission processes MEPROC

9



Spcmat (2)

Outputs– Mole speciation matrix ASMAT_L | MSMAT_L | PSMAT_L– Mass speciation matrix ASMAT_S | MSMAT_S | PSMAT_S– Speciation supplemental [A | M | P] SSUP

Major settings– SMK_SOURCE: [A | M | P] sets source category– POLLUTANT_CONVERSION: Y = use GSCNV file– REPORT_DEFAULTS: N = does not report when default

profile is used– SMK_GSREF_FIXED: Y = use fixed-format speciation

cross-reference file

10



Cntlmat (1)

Creates area, mobile, or point source projection, multiplicative control, additive control, or reactivity control matrices

Inputs– SMOKE I/O API inventory file AREA | MOBL | PNTS– SMOKE ASCII inventory file ASRC | MSRC | PSRC– Control packets file GCNTL– Speciation profiles

GSPRO

12



Cntlmat (3)

Major settings– SMK_SOURCE: [ A | M | P ] sets source category– REACTIVITY_POL: [ VOC ] sets pollutant name for

reactivity controls– REPORT_DEFAULTS: N = does not report when default

profile is used

13



Premobl (1)

Determines minimum/maximum temperatures per day for mobile sources and emission factors

Inputs– SMOKE I/O API inventory file MOBL– SMOKE ASCII inventory file MSRC– Emission factor cross-reference MPLIST– Ungridding matrix

MUMAT– Temperature data MET_CRO_2D |

MET_CRO_3D– Mobile codes MCODES– Country/state/county (daylight time exemptions) COSTCY

14



Premobl (2)

Outputs– Min/max temperature per PSI MEFTEMP– Min/max temperature per source and day MINMAXT

Major settings– SMK_SOURCE: [ A | M | P ] sets source category– SMK_MAXT_MAX: max allowed max daily

temperature– SMK_MAXT_MIN: min allowed max daily temperature– SMK_MINT_MAX: max allowed min daily temperature– SMK_MINT_MIN: min allowed min daily temperature– TVARNAME: name of the temperature variable

15



Emisfac (1)

Creates the mobile emission factors by running MOBILE5b for the scenario of interest

Inputs– Emission factor cross-reference MPLIST– Emission factor model inputs MPREF– Min/max temperature per PSI MEFTEMP– PSI list to force update MEFUPD– Mobile codes MCODES– Input diurnal emission factors MEFSD_IN– Input non-diurnal emission factors

MEFSND_IN

16



Emisfac (2)

Outputs– Diurnal emission factors table MEFSD– Non-diurnal emission factors table

MEFSND

Major settings– EF_FORCE_UPDATE: Y = use MEFUPD file– EF_YEAR: year for computing emission

factors– MB_HC_TYPE: hydrocarbon type to output from

MOBILE5b– REUSE_DIURNAL: Input MEFSD_IN file for updating– REUSE_NONDIURNAL: Input MEFSND_IN file for

updating

17



Elevpoint (1)

Identifies elevated point sources for special processing

Inputs– SMOKE I/O API inventory file PNTS– SMOKE ASCII inventory file PSRC– Grid description file G_GRIDPATH– Stack split group file PGROUP– Stack splits file PSPLIT

Outputs– Elevated point source identification file PELV– PinG CMAQ/MAQSIP stack parameters file

STACK_GROUPS

18



Elevpoint (2)

Major settings– SMK_CUTOFF_HT: cutoff height for UAM-style

processing– SMK_ENG2METRIC_YN: Y = convert units in PGROUP file from

English to metric units– SMK_PING_YN: Y = creates STACK_GROUPS

file– SMK_SPECELEV_YN: Y = use the major/minor

indicator in the PSPLIT file

– WEST_HSPHERE: N = do not convert coordinates

19



Temporal (1)

Temporally allocates area, mobile, or point source emissions, or compute hourly mobile emissions.

Inputs– SMOKE I/O API inventory file AREA | MOBL | PNTS– SMOKE ASCII inventory file ASRC | MSRC | PSRC– SMOKE day-specific file PDAY– SMOKE hour-specific file PHOUR – Temporal profiles [A|M|P]TPRO– Temporal cross-reference [A|M|

P]TREF– Diurnal emission factors table MEFSD– Non-diurnal emission factors table MEFSND – Temperature data MET_CRO_2D | MET_CRO_3D

20



Temporal (2)

Inputs (continued)– Min/max temperature per source and day MINMAXT – Emission factor cross-reference MPLIST– Ungridding matrix

MUMAT– Mobile codes MCODES– Mobile emission processes MEPROC – Country/state/county (daylight time exemptions) COSTCY– Holiday reassignment HOLIDAYS

Outputs– Hourly emissions file [A|M|P]TMP

21



Temporal (3)

Major settings– SMK_SOURCE: [A | M | P] sets source category– G_STDATE: Julian start date (YYYYDDD)– G_STTIME: start time output time zone

(HHMMSS)– G_RUNLEN: episode duration (HHMMSS)– OUTZONE: output time zone– DAY_SPECIFIC_YN: Y = import day-specific data– HOUR_SPECIFIC_YN: Y = import hour-specific data– RENORM_TPROF: N = do not renormalize temporal

profiles– REPORT_DEFAULTS: N = does not report when default

profile is used

22



Temporal (4)

Major settings (continued)– SMK_O3SEASON_YN: Y = use ozone season emissions

instead of annual average– ZONE4WM: N = do not use time zone for

applying weekly and monthly profiles

23



Tmpbio (1)

Computes the hourly, gridded, speciated biogenic emissions for a given speciation mechanism based on BEIS2 computations

Inputs– Gridded, normalized emissions BGRD– Speciation profiles

GSPRO– 2-d grid information file GRID_CRO_2D– Temperature and solar radiation data MET_FILE1– Solar radiation file (if not MET_FILE1) MET_FILE2

24



Tmpbio (2)

Outputs– Gridded, speciated, hourly molar emissions

BGTS_L– Gridded, speciated, hourly mass emissions

BGTS_S

Major settings– BG_CLOUD_TYPE: specifies method for computing

photosynthetically active radiation (PAR)– TMPR_VAR: name of the temperature variable– BIOMET_SAME: Y = take temperature and solar radiation

data from the same file– RAD_VAR: name of radiation or cloud data variable– BIOG_SPRO: speciation profile number to use– OUTZONE: output time zone

25



Laypoint (1)

Computes the plume rise fractions for point sources

Inputs– SMOKE I/O API inventory file PNTS– SMOKE ASCII inventory file PSRC– Elevated point source identification file PELV– 2-d cross-point grid information GRID_CRO_2D– 2-d cross-point meteorology data MET_CRO_2D – 3-d cross-point meteorology data

MET_CRO_3D– 3-d dot-point meteorology data (winds) MET_DOT_3D

26



Laypoint (2)

Outputs– Layer fractions file

PLAY

Major settings– REP_LAYER_MAX: layer number for reporting high

plumes– SMK_EMLAYS: number of emission layers– SMK_SPECELEV_YN: Y = use PELV file to determine

which sources get plume rise

27



Smkmerge (1)

Merges SMOKE files in many combinations to produce gridded emission files and state/county emission total reports

Inputs– SMOKE I/O API inventory file AREA , MOBL , PNTS– SMOKE ASCII inventory file ASRC , MSRC , PSRC– Hourly emissions file [A,M,P]TMP– Hourly, gridded, speciated, biogenic BGTS_L | BGTS_S– Gridding matrix [A,M,P]GMAT– Speciation matrix [A,M,P]SMAT– Layer fractions file PLAY– Grid description file G_GRIDPATH

28



Smkmerge (2)

Inputs (continued)– Multiplicative control matrix [A,M,P]XMAT– Additive control matrix [A,M,P]AMAT– Reactivity control matrix [A,M,P]RMAT– Country, state, and county names

COSTCY– Valid activities ACTVNAMS – Valid pollutants SIPOLS– Elevated point source identification file PELV– Area gridding surrogate file AGPRO

29



Smkmerge (3)

Outputs– Gridded emissions data [A|M|P|E] [G] [T] [S] [3D] [ _S| _L]– Plume-in-grid emissions PINGT [S_S|S_L]– State/county report REP[A|B|M|P|E] [G] [T] [S_S|

S_L]

Major settings– MRG_SOURCE: [A] [B] [M] [P] indicates which source

categories to include in merge– MRG_SPCMAT_YN: Y = merge speciation matrices– MRG_TEMPORAL_YN: Y = use hourly emissions– MRG_LAYERS_YN: Y = merge with layer fractions and

output 3-d file– SMK_O3SEASON_YN: Y = use ozone season emissions

instead of annual average

30



Smkmerge (4)

Major settings (continued)– MRG_GRDOUT_YN: Y = output gridded file– MRG_REPSTA_YN: Y = output state reports– MRG_REPCNY_YN: Y = output county reports– MRG_GRDOUT_UNIT: units for gridded output– MRG_TOTOUT_UNIT: units for report emission totals– AREA_SURROGATE_NUM: surrogate code for area

surrogate– SMK_ELEVPT_YN: Y = create UAM-style elevated

point source file– SMK_PING_YN: Y = creates PinG output file– MRG_METCHK_YN: Y = compare meteorology

scenario name across all input files

31



Smkmerge (5)

Major settings (continued)– MRG_CTLMAT_ADD: [A] [M] [P] merge additive

controls– MRG_CTLMAT_MULT: [A] [P] merge mult. controls– MRG_CTLMAT_REAC: [A] [M] [P] merge reactivity

controls– SMK_REPORT_TIME: daily simulation time for

output of daily total emissions

(HHMMSS)

33



Mrggrid

Merges gridded emission files together Inputs

– List of logical names of 2-d files NLST2D– 3-d inputs emissions file LGTS

Outputs– 3-d output emissions file EMIS3D

34



SMOKE Scripts

Script structure Main scripts

– Area– Biogenic– Mobile– Point– All merge script

35



Script Structure

Define Assigns file name Settings for which source categories to process Program on/off switches Program-specific settings Multiple-program settings Invoke Assigns file Redefine environment variables from default Call “smk_run.scr” script

36



Main Scripts(See Attached)

Smkinven (SMOKE inventory A, B, P) Monthly (SMOKE inventtory M, and

temporalizeation A) Daily (SMOKE temporalization B, M, P and

merging A, B, M, P, and all) SMOKE run (smk_run_scr)

_____________________________________________________________smoke programs and options north...

Documents