sliding door fittings - hafele · 6.3 sliding door fittings for wooden doors ªset cat. no. for 2...
TRANSCRIPT
Sliding Door Fittings For wooden doors
6.2
2.5
Infront EKU clipo 10 S-IF For door weight up to 10 kg
The single top running track can be installed byScrew fixing into groove orClamping into groove with swivel lugs
Running gear installation
Door height : max. 1,200 mm Door width : max. 800 mmDoor thickness : 16 - 19 mmMaterial : Plastic running gear and guideRunning gear : Top running, 1 rollerRunning gearguided by : Friction bearing mounted plastic roller, steel axleDoor stop : Stopper, with retainer for sliding into
single top running trackInstallation : Running gear without tools (quick fixing system),
not suitable for hardwood,guide for press fitting into drill hole
6.3
Sliding Door Fittings For wooden doors
Set
Cat. No .
For 2 doors, with installation instructions 405.82.202
For 2 doors Material Colour Packing pieces Cat. No.
Running gear, quick fi xing by inserting with clip 4 Plastic Black 1, 100 405.83.901
Door stopper, with retaining spring, for top running tracks 2 Plastic Grey 405.83.132
Guide, for press fitting 2 Plastic Anthracite 405.83.104
Length Cabinet top thickness mm
Mater ial Finish/colour Packing Ca t. No .m m
Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 2.5 mm
2.5 min. 25 Aluminium Bright 2.5 405.87.002
3.5 3.5 405.87.003
Single top running track, for clamping into groove with swivel lugs not suitable for hardwood
2.5 min. 19 Aluminium Bright 2.5 405.86.002
3.5 3.5 405.86.003
Single bottom guide track, ribbed, for press fitting andglue fixing into 7 mm groove
2.5 Plastic Anthracite 2.5 405.98.517
3.5 3.5 405.98.527
1, 100
1, 50
min. 25 A Brigh
Order referencePlease order guide and running track separately
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors
6.4
Infront EKU Clipo 15 SH-IF For door weights up to 15 kg, for straight or curved doors
Running gear installation
Installation of single running track with curved doors
With radiuses of min. 1,600 mm: Press-fit single running track in pre-milledgroove.
Door : max. 1,400 mm Door width : max. 1,000 mmDoor thickness : 16 - 19 mmHeight adjustment : 1.5 mm on running gear
using adjusting wheelMaterial : Plastic housing, running gear and guideRunning gear : Top running, 1 rollerRunning gear guided by : Friction bearing mounted plastic roller,
steel axleDoor stop : Top stopper, with retainer for sliding into
single top running trackInstallation : Housing for screw fixing, running gear
without tools (quick fixing system),guide for press fitting into drill hole
The single top running track can be installed byScrew fixing into groove orClamping into groove with swivel lugs
6.5
Sliding Door Fittings For wooden doors
Set
Cat. No.
For 2 doors, with installation instructions 405.82.215
For 2 doors Materia l Colo ur Packing Cat. No.pieces
Housing, for screw fixing 4 Plast ic Anth racite 1, 100 405.83.801
Running gear, quick fixing by inserting with clip
4 Plast ic Anth racite 1, 100 405.83.909
Track sup port 4 Plast ic G rey
Door stopper, with retaining spring, for top running tracks 4 Plast ic G rey 1, 100 405.83.132
Guide, for press fitting 2 Plast ic Anth racite 1, 50 405.83.104
Leng th Cabinet top thickness
Material Finish/colour Packing Cat. No.m mm m
2.5 min. 25 Aluminium Brigh t 2.5 405.87.002
3.5 3.5 405.87.003Single top running track , for screw fixing into groove with chipboard screws with countersunk head Ø 2.5 mm
Order referencePlease order guide and running track separately
.
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors
6.6
2.5
Infront EKU Clipo 15 V-IF For door weights up to 15 kg for serving hatches and narrow wooden frame doors
Running gear installation
Installation of single running track with curved doors
With radiuses of min. 1,600 mm: Press-fit single running track in pre-milledgroove.
Door height : max. 1,400 mmDoor width : max. 1,000 mmDoor thickness : 16 - 19 mmHeight adjustment : 1 mm at running gear using screwMaterial : Zinc alloy housing, plastic running gear and guideRunning gear : Top running, 1 rollerRunning gear guided by : Friction bearing mounted plastic roller, steel axleDoor stop : Top stopper, with retainer for sliding into
single top running trackInstallation : Housing for screw fixing into groove,
running gear for screw fixing,guide for press fitting into drill hole
The single top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
6.7
Sliding Door Fittings For wooden doors
Set
Cat. No
For 2 doors, with installation instructions 405.82.233
For 2 doors Material Finish/colour Packing pieces Cat. No.
Material Finish/colour Packing m Cat. No.
Housing, for groove mounting 4 Zinc alloy
Aluminium
1, 100 405.83.828
Running gear, for inserting 4 Plastic Anthracite 1, 100 405.83.918
Track support 4 Plastic Light grey
Door stopper, with retaining spring, for top running tracks
4 Plastic Grey 1, 100 405.83.132
Guide, for press fitting 2 Plastic Anthracite
Aluminium
Bright
Bright
Anthracite
1, 50 405.83.104
Length m Cabinet topthickness mm
Single top running track, for screw fixing into groove with chipboard screwswith countersunk head Ø 2.5 mm
,
, ,
2.5 min. 25 2.5 405.87.002
3.5 3.5 405.87.003
Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood
2.5 min. 19 2.5 405.86.002
3.5 3.5 405.86.003
Single bottom guide track, ribbed, for press fitting and glue fixing into 7 mm groove
2.5 Plastic 2.5 405.98.517
3.5 3.5 405.98.527
Order referencePlease order guide and running track separately
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors - gentle closing
6.8
Sliding Door FittingsFor wooden doors - gentle closing
Running gear installation
Door overlap
Soft closing mechanism installation
Door thickness 16 mm Door thickness 19 mm
Infront EKU Clipo 16 IF For wooden weights up to 16 kg
Door height : max. 1,400 mmDoor width : max. 1,000 mmDoor thickness : 16 - 19 mmHeight adjustment : +2/-1 mm on running gear using adjusting wheelMaterial : Housing, running gear and guide: PlasticRunning gear : Top running, 2 rollersRunning gear guided by : Friction bearing mounted roller: Plastic,
axle: SteelDoor stop : Top stopper, with retainer for sliding into single top
running trackInstallation : Housing for screw fixing, running gear without
tools (quick fixing system), guide for press fittinginto drill hole
The single top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
6.9
Sliding Door Fittings For wooden doors - gentle closing
Set
Order referenceOrder one soft closing mechanism each for door widths of 480 mm and above.
Cat. No.
For 2 doors, with installation instructions 405.82.216
For 2 doors, with soft closing mechanism (2 pieces), with installation instructions 405.82.218
For 2 doors Material Finish/colour
Running gear 4 Plastic Black
Housing 4 Plastic Black
Door follower 1 Plastic Grey
Stopper 2 Plastic Grey
Guide 2 Plastic Black
Cabinet top thickness mm
Material Finish/colour Packing Length m Cat. No.
Single running track, for glue fixing
min. 19 Aluminium Bright 1 2.5 405.87.042
3.5 405.87.043
Single running track, pre-drilled, for screw fixing
min. 30 Aluminium Bright 1 2.5 405.87.082
3.5 405.87.083
6.0 405.87.086
Single running track, with swivel lugs(not suitable for hardwood/MDF)
min. 19 Aluminium Bright 1 2.5 405.87.092
3.5 405.87.093
6.0 405.87.096
Track end piece, with swivel lugs (not suitable for hardwood/MDF)
Plastic Grey 2 405.83.180
Track end piece, for screw fixing
Plastic Grey 2 405.83.181
Double running track, pre-drilled, for screw fixing
min. 19 Aluminium Bright 1 2.5 405.90.032
3.5 405.90.033
6.0 405.90.036
Double running track, pre-drilled, for screw fixing
min. 19 Aluminium Anodized 1 2.5 405.90.942
3.5 405.90.943
6.0 405.90.946
Single bottom guide track, ribbed, for press fitting and glue fixing into 7 mm groove
Plastic Anthracite 1 2.5 405.98.517
3.5 405.98.527
6.0 405.98.561
Soft closing mechansim for retrofitting or for soft closing on both sides, with installation instructions
Plastic Grey 1 405.10.070
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors - gentle closing
6.10
Infront EKU Clipo 25 S-IF For door weights up to 25 kg,for sliding doors with guide with zero clearance
Housing installation
Installation
Housing and running gear Adjustment 2 mm
Guide with sprung roller Guide with zero clearance
Door height : max. 2,200 mm Door width : max. 1,000 mmDoor thickness : 19 - 25 mmHeight adjustment : 2 mm on running gear using eccentric screwMaterial : Plastic housing, zinc alloy running gear, plastic guideRunning gear : Top running, 2 rollersRunning gearguided by : Friction bearing mounted, plastic rollersDoor stop : Top stopper, with retainer for sliding into
single top running trackInstallation : Housing for screw fixing, running gear without tools
(quick fixing system), guide for press fitting into drill hole
The single top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
Length of single top running tracks = internal cabinet width - 50 mmBefore installing single top running track: Insert top door stoppers
6.11
Sliding Door Fittings For wooden doors - gentle closing
Set
Cat. No .
For 2 doors, with installation instructions 405.04.001
For 2 doors Materia l Finish/colour Packing pieces Cat. No .
Housing, for screw fixing 4 Plastic 1, 100 405.00.030
Running gear with height adjustment 2 mm, 2 rollers with friction bearings
4 Zinc alloy Anthr acite 1, 100 405.00.010
Door stopper, with retaining spring, for top running tracks
4 Plastic Br ight 1, 100 4
Track end piece, for inserting or removingrunning geres, for single top running track
4 Plastic Grey 1, 100 405.00.070
05.00.050
Guide, for press fitting, with sprung roller 2 Plastic Grey 1, 50 405.04.040
Lengthm
Cabinet top thickness mm
Mater ial Finish Packing m Cat. No .
Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 3.0 mm
2.5 min. 30 Aluminium Bright 2.5 405.00.202
3.5 3.5 405.00.203
Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood
2.5 min. 25 Aluminium Bright 2.5 405.01.002
3.5 3.5 405.01.003
Single bottom guide track, for press fitting and gluing into groove
2.5 Aluminium Bright 2.5 405.04.251
3.5 3.5 405.04.351
Order referencePlease order guide and running track separately
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors - gentle closing
6.12
Infront EKU Clipo 35 S-IF For door weights up to 35 kg,for sliding doors with guide with zero clearance
Housing installation
Installation
Housing and running gear Adjustment 2 mm
Guide with sprung roller Guide with zero clearance
Door height : max. 2,200 mmDoor width : max. 1,000 mmDoor thickness : 19 - 25 mmHeight adjustment : 2 mm on running gear using eccentric
screw or screwMaterial : Plastic housing, zinc alloy running gear, plastic
guideRunning gear : Top running, 4 rollersRunning gear guided by : Friction bearing mounted, plastic rollersDoor stop : Top stopper, with retainer for sliding into
single top running trackInstallation : Housing for screw fixing, running gear
without tools (quick fixing system),guide for press fitting into drill hole
The single top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
Length of single top running tracks = internal cabinet width - 50 mmBefore installing single top running track: Insert top door stoppers
6.13
Sliding Door Fittings For wooden doors - gentle closing
Set
Cat. No .
For 2 doors, with installation instructions 405.06.001
For 2 d oors Material Finish/colour Packing pieces Cat. No.
Housing, for screw fixing 4 Plastic Anthr acite 1, 100 405.00.030
Running gear with height adjustment 2 mm, 4 rollers with friction bearings
4 Zinc alloy Br ight 1, 100 405.02.010
Suspension fitting, for clipping on, with support screw
4 Zinc alloy Br ight 1, 100 405.02.020
Door stopper, with retaining spring, for top running tracks
4 Plastic G rey 1, 100 405.00.050
Track end piece, for inserting or removing running gears, for single top running track
4 Plastic G rey 1, 100 405.00.070
Guide, for press fitting, with sprung roller 2 Plastic G rey 1, 50 405.04.040
Length m Cabinet top thickness mm
Material Finish Packing m Ca t. No .
Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 3.0 mm
2.5 min. 30 Aluminium Bright 2.5 405.00.202
3.5 3.5 405.00.203
Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood
2.5 min. 25 Aluminium Bright 2.5 405.01.002
3.5 3.5 405.01.003
Single bottom guide track,for press fitting and gluing into groove
2.5 Aluminium Bright 2.5 405.04.251
3.5 3.5 405.04.351
Order referencePlease order guide and running track separately
Packing : 1 set
Set components(Individual parts)
Tracks
Sliding Door Fittings For wooden doors
6.14
2.5
Vorfront EKU Regal A 25 H VF For door weights up to 25 kg, for shelving 1 door.
Door height : max. 2,400 mm Door width : max. 1,200 mmDoor thickness : 19 - 25 mmHeight adjustment : 2 mm on running gear using eccentric screwMaterial : Steel running gear and guideRunning gear : Top running, 1 rollerRunning gear Ball bearing mounted, plastic coated rollerguided by :Door stop : Top and bottom stopper, with top retainer for
sliding into single top running trackInstallation : Running gear and guide for screw fixing, fitting
and removing of door without tools
Drilling pattern for running gear and guide
Mounting sliding door to cabinet
Top running gear Bottom guide
Hook running gear into single top running trackSwing door into position, push guide upwards into single guide track and screwon.
6.15
Sliding Door Fittings For wooden doors
Set
Cat. No.
For 1 door, with installation instructions 405.55.011
For 1 door Material Finish/colour
Running gear 2 Steel Yellow chromatized
Top door stopper 1 Plastic Grey
Guide 2 Steel Yellow chromatized
Bottom door stopper 2 Plastic Grey
Length Material Finish/colour Packing Cat. No.m
Single top running track, for screw fixing with Pan head chipboard screws Ø 3.5 mm
2.5 Aluminium Bright 2.5 m 405.56.002
3.5 3.5 m 405.56.003
Single bottom guide track, for sc rew fixing with chipboardscrews with count ersunk head Ø 2.5 mm or for glue fixing (with 19 mm thick base panels)
2.5 Aluminium Bright 2.5 m 405.30.026
3.5 405.30.036
Centre door stopper, for cabinets with front running, centre door for engaging in centre position
Plastic Grey 405.33.0301, 5
Packing : 1 set
Set components(Individual parts)
Tracks
Order referencePlease order guide and running track separately
Order referenceThe single top running track and the single bottom guide track are also available in fixed lengths with appropriate purchase quantities.
Packing : 1 pc
Sliding Door Fittings For wooden doors
6.16
Vorfront EKU Regal B 25 H VF For door weights up to 25 kg for individually positioned door
Door height : max. 2,000 mmDoor width : max. 1,200 mmDoor thickness : 16 - 30 mmHeight adjustment : 3 mm on running gear using eccentric screwMaterial : Steel running gear and guideRunning gear : Top and bottom running, 1 rollerRunning gear guided by : Plastic coated rollerDoor stop : Top and bottom stopper, with retainer for
sliding into single running trackInstallation : Connecting spacer plate, running gear and guide
for screw fixing
Single running and guide track installation
Drilling pattern for running gear and guide
Installation dimensions
With fixing clips
Running gear, bottom running Running gear, top running
Bottom runningTop running
With connecting bolt and Minifix connector housing
6.17
Sliding Door Fittings For wooden doors
Set
Cat. No.
For 1 door, with installation instructions 405.55.212
For 1 door Material Finish/colour
Running gear with friction bearing 2 Steel Yellow chromatized
Top door stopper, with retaining spring,for single running track
4 Plastic G rey
Guide 2 Steel Yellow chromatized
Conne cting spacer plate, for running gear and guide 4 Zinc alloy Br ight
Fixing clip 22 Plastic G rey
Safety clip 4 Zinc alloy Br ight
End cap 4 Plastic G rey
Mounting jig 1 Plastic Black
Length m Materia l Finish/colour Packing Ca t. No .
Single running track, for clipping onto fixing clips or push fitting with connecting bolts
2.5 Aluminium Silver coloured anodized
2.5 m 405.69.902
3.5 3.5 m 405.69.903
Single guide track, for clipping onto fixing clips or push fitting with conn ecting bolts
2.5 Aluminium Silver colouredanodized
2.5 m 405.61.902
3.5 3.5 m 405.61.903
Conne cting bolts, for fixing running and guide tracks Zinc a lloy Bright 1, 100 405.45.000
Centre door stopper for cabinets with front running,centre door for engaging in centre position
Plastic Grey 1, 5 405.67.070
Packing : 1 set
Packing : 1 pc
Set components(Individual parts)
Tracks and individual components
Order referencePlease order guide and running track separately
Order referenceThe single running and guide tracks are also available in fixed lengths with appropriate purchase quantities.Please order Minifix connector housing for tightening the connecting bolt.
Sliding Door Fittings For wooden doors
6.18
Vorfront Sliding Fitting ‘ELITE’For door weight up to 80kg
Applications range : Built-in wardrobe, Dress room. etc.Max. door thickness : 30 mmHeight adjustment : 5 mmAnti-drilling systemAvailable in the heavy doors.Smooth movement.
Upper roller, lower guide and tracks drilling patterns
6.19
Sliding Door Fittings For wooden doors
Track and individual components
2 Doors components 3 Doors components
Set
From the floor Door Cat.No.
17mm, with installation manual For 2 doors 402.34.000
For 3 doors 402.34.001
33mm, with installation manual For 2 doors 402.34.002
For 3 doors 402.34.003
Packing : 1 set
Upper track 3.6
4.0
4.2
3.6 m
4.0 m
4.2 m
401.96.936
401.96.940
401.96.942
Cat.No.Packing Length mm Material Finish
Lower track 3.6
4.0
4.2
3.6 m
4.0 m
4.2 m
401.98.936
401.98.940
401.98.942
Upper runningrail damper
50 kg
30 kg
ABS
ABS
Aluminium Powder coating
Powder coatingAluminium
Light Grey
Dark Grey
1
1
402.34.400
402.34.402
Lower guiderail damper
- ABS Grey 1 402.34.401
Dust protectionprofile
- Aluminium 1.0 402.34.410
Handle securitysystem
- DC01sp. 2,5 mm
Nickel Plated
Silver
1 402.34.415
Sliding Door Fittings For wooden doors
6.20
Upper and lower damper installation
Upper damper Lower damper
6.21
Sliding Door Fittings For wooden doors
Upper guide, Bottom running gear drilling pattern
Upper and bottom track drilling pattern
Infront SDR-2 sliding door fittings For door weight up to 15kg
Door thickness : Min.18mmMaterial : Track: Aluminum, Upper guide, Bottom running gear :
PlasticUpper stopper : Plastic
Smooth & easy sliding
Upper guide
Bottom running gear
Packing Cat. No.
Upper & Bottom track, Aluminum Cut to size(meter) 405.92.799
Upper guide, Plastic 1 405.92.999
Bottom running gear, Plastic 1 405.92.798
Upper stopper, Plastic 1 405.92.300
Pivot Sliding Door Fittings
6.22
Runner length Dimension B Cat. No.mm mm mm
350 186 max. 244 408.07.350
400 236 max. 294 408.07.403
450 286 max. 344 408.07.458
500 336 max. 394 408.07.501
550 386 max. 444 408.07.556
600 436 max. 494 408.07.609
For 1 door
Guide 1 pair
Mounting bracket 4 pieces
Installation instructions 1 piece
Colour Packingpieces
Cat. No.
White 1 or 100 or 1,000 340.41.702
Brown 1 or 100 340.41.104
Push-in depth
Infront Pivot sliding For door weight up to 5.5 kg (max. 25 kg in combination with Parallelo synchro control)
Installation with mounting brackets on cabinet top or base
Mount cruciform mounting plates to runner.
Application and planning dimensionsWooden strut for connecting top and bottom guides must be supplied by customerLength = Internal cabinet height - 70 mm
Installation with mounting brackets to cabinet top and base
Concealed hinges and cruciform mounting plates installationUse concealed hinges with opening angle 95 and door offset max. 8 mm formounting the door.
Door height : 700 mm ( 1,800 mm in combination with Parallelo synchro control)
Door thickness : 16 - 20 mm Material : SteelFinish : GalvanizedInstallation : Runners for screw fixing to cabinet top and base or to
intermediate panel with mounting brackets
Fittings to intermediate panel
Set
Individual components for 35 mm drill hole
Packing : 1 pair
Order referenceConcealed hinges with opening angle of 95 , cruciform mounting plates andcover caps for covering the cup drillings are not included in the set. Please orderseparately.To ensure that the door runs parallel, order Accuride 1316 Paralello synchrocontrol.
Material : PlasticInstallation : Press fitting
6.23
Pivot Sliding Door Fittings
Order referenceProfile rods with fixed lengths of up to 6,000 mm are available from an orderquantity of 100 pieces.Provide catalogue number and exact length when ordering a fixed length.
Suitable for Cat. No.
Runner length 350 mm 408.05.356
Runner length 400 mm 408.05.409
Runner length 450 mm 408.05.454
Runner length 500 mm 408.05.507
Runner length 550 mm 408.05.552
Runner length 600 mm 408.05.605
For 1 door
1 PairToothed rail
Pinion with srew mount 2 Pieces
Fixing screws M4 x 25 for screw mount 4 Pieces
1 PieceProfile rod guide
Installation instructions 1 Piece
Lengthmm
Cat. No.
2000 226.67.205
Parallelo Synchro control system
Profile rod length = internal cabinet height - 63mm
Concealed hinges and cruciform mounting plates installation
Area of application : Ensures that the door runs parallel when using theAccuride 1319 pivot sliding door fitting
Door weight : max. 25 kgDoor height : max. 1,800 mmDoor thickness : 16 - 20 mmMaterial : Toothed rail : Steel and plastic
pinion and profile rod guide : PlasticInstallation : For screw fixing
Set
Set components
Profile rod
Packing : 1 set
Packing : 1 set
Order referenceThe profile rod is not included in the set. Please order separately.
Mount cruciform mounting plates to wooden strut. A distance of atleast 122 mm must be maintained for fitting the concealed hinges.
Material : SteelFinish : Nickel platedDiameter : 8mm
Sliding Door Fittings Accessories
6.24
Straightening fitting For sliding door fitting for wooden doors
Area of application : Prevents doors warping in either directionor straightens doors which have become warped.
Door height : Max.2,200 or 2,600 mmDoor thickness : Over 18mmMaterial : Steel, Plastic, Zinc alloyFinish : Black colour powder coatingColour : Black
Length mm Door height mm Cat. No. 1,700 2,000 2,200 405.92.4401,990 2,200 2,600 405.92.441
Packing : 1 set
Case B
Case B
Plate holder
Plate holderConnecting plate
Connecting plate
Case A
Case A
Adjustment nut
10H spanner use
Adjustment
Ø3.5mmcountersuk
head screwwith tap
Depth
Depth
DepthDepth
Depth
6.25
Sliding Door Fittings for Wooden Doors
HAWA Junior 80/Z for Door weights up to 80 kg
Area of application : For 1- and 2-leaf sliding doorsFeatures : Two way suspension
Height and side adjustable door leavesTrack buffer with adjustable retainerLow wear and tearQuiet running actionLGA tested to 100,000 cycles (EN1527).
Max. door weight : 80 kg per door leafMin. door thickness : 26 mmAdjustable vertically : 4 mmMaterial : Running gear with plastic rollers
Floor guide free of play : Plastic
The two-way suspension allows the assembly and removal of the doorleaves by two different methods:
End installation : The assembly and removalof a door leaf is possible without removing anexisting cover panel or pelmet.
Front installation : The front cover panel orpelmet must be removable.
Optional fixing methodSide-fix angle profile Max. door thickness 42 mm
Sliding Door Fittings for Wooden Doors
6.26
Cat. No.
For 1-Leaf Sliding Door 940.80.001
For 1-leaf sliding door
Cat. No.
Running gear 2-wheel, M10 940.80.012
Two way suspension with suspension bolt M10 and mounting screws 940.80.022
Track buffer with retainer 940.80.041
Rubber wall buffer 940.40.051
Floor guide free of play 940.40.031
Height adjusting pin
2 Pieces
2 Pieces
1 Piece
1 Piece
1 Piece
1 Piece 940.40.091
Material Finish Length mm Cat. No. Running track Aluminium Clear anodised 6000 940.80.600.1
Guide channel Plastic Black 1300 940.41.130
Cover cap for running track Rubber Grey _ 940.80.060
HAWA Junior 80/Z Set
Set Components
Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings.
Running Tracks and accessories
Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity.
6.27
Sliding Door Fittings for Wooden Doors
HAWA Symmetric 80/Z for Door weights up to 80 kg
Area of application : For 2-leaf sliding doorsFeatures : Simultaneous opening of 2 door leaves
Two way suspensionHeight and side adjustable door leavesLow wear and tearQuiet running action
Door width : 500 - 1200 mmDoor thickness : 32 - 47 mmMax. door weight : 80 kg per door leafMin. door thickness : 26 mmAdjustable vertically : 4 mmMaterial : Running gear with plastic rollers
Floor guide free of play : Plastic
The two-way suspension allows the assembly and removal of the doorleaves by two different methods:
End installation : The assembly and removalof a door leaf is possible without removing anexisting cover panel or pelmet.
Front installation : The front cover panel orpelmet must be removable.
Sliding Door Fittings for Wooden doors
6.28
For 1-leaf sliding door
Cat. No.
Guide roller 2 pieces 940.80.086
Serrated belt lock for manual systems 1 piece 947.00.055
Driver, laterally adjustable for manual systems 1 piece 947.00.056
Serrate d belt, 10 m 1 piece 947.00.037
Running gear 2-wheel, M10 4 pieces 940.80.012
Two way suspension with suspension bolt M10 and mounting sc rews 4 pieces 940.80.022
Track bu ffer with adjustable retainer 1 piece 940.80.041
Floor guide f ree of play 2 pieces 940.40.031
Rubber wall bu ffer 1 piece 940.40.051
Height adjusting pin 1 piece 940.40.090
Cat. No.
For 2-Leaf Sliding Doors 940.81.009
Material Finish Cat. No.
Running track Aluminium Clear anodised 6000 940.80.600.1
Guide channel Plastic Black 1300 940.41.130
Cover cap for running track Rubber G rey _ 940.80.060
Length mm
HAWA Symmetric 80/Z Fitting Set
Set Components
Note : Running and guide tracks are not included, please order separately.
Running Tracks and accessories
Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity.The length of the serrated belt is calculated for a maximum door leaf width of 1200 mm. The serrated belts can be connected in the clamping piece.
6.29
Sliding Door Fittings for Wooden doors
HAWA Telescopic 80/2 for Door weights up to 80 kg
Area of application : For 2-leaf sliding doorsFeatures : Parallel simultaneous opening of 2
door leavesTwo way suspensionHeight and side adjustable door leavesLow wear and tearQuiet running action
Max. door weight : 80 kg per door leafWidth of leaf : 500 - 1200 mmDoor thickness : 32 - 47 mmAdjustable vertically : 4 mmMaterial : Side adjustable floor guide, free of play:
Plastic
The two-way suspension allows the assembly and removal of the doorleaves by two different methods:
End installation : The assembly and removalof a door leaf is possible without removing anexisting cover panel or pelmet.
Basic elements required2 Sets of HAWA Junior 80/Z and 2 running tracks in addition to Telescopic 80/2 fittingset
Front installation : The front cover panel orpelmet must be removable.
Without guide channel
STB = Sliding door widthP = Panel overlapLMB = Opening width
With guide channel
Sliding Door Fittings for Wooden Doors
6.30
Cat. No.
For 2-Leaf Sliding Doors 940.81.007
For 2-leaf sliding doors
Cat. No.
Wide follower 947.00.050
Guide roller, Ø 36 mm, with long mounting plate 947.00.048
Guide roller, Ø 36 mm, with short mounting plate 947.00.049
Wall or ceiling bracket for serrated belt 947.00.053
Serrated belt, 2700 mm 947.00.054
Receiving plate for follower 947.00.051
Floor guide Confort 120, 1 panel
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece 940.40.070
Material Finish Length mm Cat. No.
Running track Aluminium Clear anodised 6000 940.80.600.1
Guide channel Plastic Black 1300 940.41.130
Cat. No.
HAWA Junior 80/Z Fitting set 940.80.001
HAWA Telescopic 80/2 Fitting Set
Set Components
Note : Running and guide tracks are not included, please order separately.
Running Tracks and accessories
Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity.Please order additionally 2 sets of HAWA Junior 80/Z
6.31
Sliding Door Fittings for Wood Doors
HAWA Telescopic 80/3 for Door weights up to 80 kg
Area of application : For simultaneous opening of 3 sliding doorsto the left or right
Features : Two way suspensionHeight and side adjustable door leavesLow wear and tearQuiet running action
Max. door weight : 80 kg per door leafWidth of leaf : 500 - 1200 mmDoor thickness : 40 - 47 mmMaterial : Side adjustable floor guide, free of play :
Plastic
Basic elements required3 Sets of HAWA Junior 80/Z and 3 running tracks in addition to Telescopic 80/3 fitting set
Without guide channel
S (Door thickness) = 40 - 47 mmN = S - 26 mm
With guide channel
STB = Sliding door widthP = Panel overlapLMB = Opening width
Sliding Door Fittings for Wood Doors
6.32
HAWA Telescopic 80/3 Fitting Set
Set Components
Note : Running and guide tracks are not included, please order separately.
Set Components
Cat. No.
For 3-Leaf Sliding Doors 940.81.008
For 3-leaf sliding doors
Cat. No.
Follower, narrow 947.00.052
Follower, wide 947.00.050
Guide roller, Ø 36 mm with long mounting plate 947.00.048
Guide roller, Ø 36 mm with short mounting plate 947.00.049
Wall and ceiling bracket for serrated belt 947.00.053
Serrated belt, 2700 mm 947.00.054
Receiving plate for wide follower 947.00.051
Bottom guide Confort 120, 1 panel
1
2 Pieces
2 Pieces
2 Pieces
1 Piece
2 Pieces
1 Piece
1 Piece 940.40.070
Guide Plate, with guide piece with zero clearance 14mm 1 Piece 943.04.030
Cat. No.
HAWA Junior 80/Z Fitting set 940.80.001
Material Finish Length mm
Cat. No.
Running track Aluminium Clear anodised 6000 940.80.600.1
Guide channel Plastic Black 1300 940.41.130
Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity.Please order additionally 3 sets of HAWA Junior 80/Z
Running Tracks and accessories
6.33
Sliding Door Fittings for Wood Doors
HAWA Telescopic 40/4 for Door weights up to 40 kg
Area of application : For 4-leaf sliding doorsFeatures : Simultaneous opening of 4 door leaves
Two way suspensionHeight and side adjustable door leavesLow wear and tearQuiet running action
Max. door weight : 40 kg per door leafWidth of leaf : 500 - 800 mmDoor thickness : 40 - 47 mmAdjustable vertically : 4 mmMaterial : Pulley guide : Plastic
Side adjustable floor guide, free of play :Plastic
Basic elements required4 Sets of HAWA Junior 80/Z and 2 running tracks in addition to Telescopic 40/4 fitting set
S (Door thickness) = 40 - 47N = S - 26 mm
STB = Sliding door widthP = Panel overlapLMB = Opening width
The two-way suspension allows the assembly and removal of the doorleaves by two different methods:
End installation : The assembly and removalof a door leaf is possible without removing anexisting cover panel or pelmet.
Front installation : The front cover panel orpelmet must be removable.
Sliding Door Fittings for Wood Doors
6.34
Cat. No.
For 4-Leaf Sliding Doors 940.41.002
For 4-leaf sliding doors
Cat. No.
Follower with fixing screws 947.00.050
Guide roller, Ø 36 mm, with long mounting plate 947.00.048
Guide roller, Ø 36 mm, with short mounting plate 947.00.049
Wall or ceiling bracket for serrated belt 947.00.053
Serrated belt, 2700 mm 947.00.054
Serrated belt, 10 m 947.00.037
Receiving plate for follower 947.00.051
Floor guide Confort 120, 1 panel 940.40.070
Guide roller for Junior 80 track 940.80.086
Serrated belt lock for manual systems 947.00.055
Driver, laterally adjustable for manual systems
2 Pieces
2 Pieces
2 Pieces
2 Pieces
2 Pieces
1 Piece
2 Pieces
2 Pieces
2 Pieces
1 Piece
1 Piece 947.00.056
Cat. No.
HAW A Junior 80/Z Fitting set 940.80.001
Material Finish Length mm Cat. No.
Running track Aluminium Clear anodised 6000 mm 940.80.600.1
Guide channel Plastic Black 1300 940.41.130
HAWA Telescopic 40/4 Fitting Set
Set Components
Note : Running and guide tracks are not included, please order separately.
Running Tracks and accessories
Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity.Please order additionally 4 sets of HAWA Junior 80/Z
Cat. No.
Smuso AD soft close for HAWA Junior 80 systems 940.80.043
6.35
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
Smuso AD Soft Close for HAWA Junior 80 For Door Weights up to 80 kg
NoteWhen using the double-leaf soft close together with the Junior 80 sets please note the following: The stopper supplied with the Junior 80 set is not required in this case. Werecommend ordering individual components instead of the complete set for cost reasons.
Area of application : For 1-leaf and 2-leaf sliding doorsSuitable for wood doors: HAWA Junior 80/Z, 80/BSuitable for glass doors: HAWA Junior 80/GL, 80/GP, 80/GV
Max. door weight : 80 kg per door leafInstallation : For connection to running gear
Smuso AD Soft close, single leaf
Smuso AD Soft close, double leaf bi-parting
Häele Smuso AD soft closeHäele stopper with catchHAWA track buffer
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
6.36
Area of application : For 1 - leaf and 2 - leaf sliding doorsSuitable for wood doors: Hawa Junior 80/Z, 80/BSuitable for glass doors; Hawa Junior 80/GP, 80/G, 80/GV, 80/GL, 80/GS
Mechanism : High-class hydraulic metal damper with a diameter of 14 mmguarantees high quality and a long life-cycleContinuous gentle deceleration and closing with no door spring-back
Max. door weight : 80 kg per door leafInstallation : For connection to running gear, Invisibly integrated in the top track
One-sided damping 690 mm
Two-sided damping 1030 mm
Cat.No.
HAWA-Junior 80 SoftMove 940.80.046
HAWA-Junior 80 SoftMove
6.37
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
HAWA Junior Side Fix Angle Profile For HAWA Junior 40, 80 and 120 Running Tracks
HAWA Angle Bracket For Wood Sliding Door Applications
HAWA Junior 40
HAWA Junior 80
HAWA Junior 120
Easy and fast installation of angle profile and running track
Features : For wall mounted sliding door applicationsElegant design with concealed mountingContinuous profile for simple levelingEasy and fast to installNo drilling of running track and angle profileNo additional support structure requiredCan be used for wood or glass sliding doors
Max. weigh t: 40 kg, 80 kg or 120 kg per door leafMaterial : Angle profile: Aluminium clear anodised
Cover caps: Plastic grey
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
6.38
1 Set
1 Set
1 Set
For HAWA Junior 40 Running Tracks
Note : Running tracks and fittings sets have to be ordered separately
For HAWA Junior 120 Running Tracks
For HAWA Junior 80 Running Tracks
6.39
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
Bottom Guides and Channels
Packing Cat. No.
General purpose guide plate,steel galvanised with plastic slider13 mm, play-free
943.04.030
Guide with plastic slider 13 mm and suspension block, play-free.For use with multi purpose suspension and retainer profile
946.12.060
Multi-purpose suspension and retainer profilepredrilled, aluminium clear anodisedFor use with plastic slider 13 mm
6000 mm 946.08.651cut to size 946.14.990
Bottom guide channel, predrilled 20 x 20 x 3 mm Aluminium clear anodised
6000 mm 407.80.901
Bottom guide channel, predrilled 20 x 28 x 3 mmBrassFor use with plastic slider 13 mm
6000 mm 942.50.600cut to size 942.50.999
Bottom guide channel, undrilled 24 x 24 mmAluminium clear anodisedFor use with plastic slider 13 mm
6000 mm 940.81.600Cut to size 940.81.999
Stop bumper for 940.81.600 and 940.81.999
1 Piece
Piece
M
Piece
Piece
Piece
1
1 940.80.051
Sliding Door Fittings accessories for HAWA Sliding Door Fittings
6.40
Bottom Guides and Channels
Packing Cat. No.
Guide plate steel galvanised with plastic slider 9 mm.For use with bottom guide channel 13 x 14 mm
943.04.030
Bottom guide channel, brass, predrilled13 x 14 x 1.5 mmFor use with plastic slider 9 mm
6000 mm 407.69.860
cut to size
1
407.69.899
6.41
Sliding Door Fittings For Wooden Doors
EKU Porta 45/H for door weights up to 45 kg Ceiling installation and wall mounting
Bottom Guide
Standard floor guide
Section Trolley, track buffer and floor guide
Wall mounting floor guide
Side-adjustable floor guide
Area of Application : For 1 - leaf and 2 - leaf sliding doorsAdjustable vertically : 3 mmMax. door weight : 45 kgMax. door heigh t: 2200 mmMax. door width : 1000 mmDoor thickness : 30 - 40 mm
Sliding Door Fittings For Wooden Doors
Note : For 2 - leaf sliding doors, please order 2 sets of 1 - leaf sliding door fittings
Note : Fixing element is supplied
Note : Install the wall fixing element at intervals of 500 mm.
Cat. No. Finish
Running track blank 940.54.000
1 Fitting Set without Running Track
1 Fitting Set with 2000 mm Running track For 1 - leaf sliding door
G 940.54.001
Running Gear,4-wheel 940.54.012
940.54.021
940.54.022
940.54.020
940.54.042
940.60.051
940.60.070
Cat. No.
Running Track Aluminium Blank 1700 940.54.917
2000 940.54.920
2500 940.54.925
6000 940.54.960
Cut to size 940.54.999
Wall mounting bracket with fixing element, forrunning track with bolts and nuts
Steel Zinc plated 45 940.54.060
Steel Zinc plated 81,5 941.00.034
For 1 - leaf sliding door
Cat. No. For 1-leaf sliding door
2
2
2
2
1
9
Suspension screw, galvanized
Suspension, galvanized
Stop with retentionstopper
Wall Buffer, 18 x 10 mm, Rubber, Black
Floor Guide, adjustable, plastic
Hexagon ribbed nut, M8
Length mm
Finish Material
Wall mounting floor guide
6.42
EKU Porta 45/H Set
Set Components
Running Tracks and accessories
6.43
Sliding Door Fittings For Wooden Doors
EKU Porta 60/100 H for door weights up to 60 kg, 100 kg
Continuously adjustable hold-open force Side-adjustable floor guide
Section Trolley,track buffer and floor guide
Wall mounting floor guide
Ceiling installation and wall mounting
Bottom Guide
Standard floor guide Wall mounting floor guide
Area of Application : For 1 - leaf and 2 - leaf sliding doorsAdjustable vertically : 3 mmMax. door weight : 60 kg or 100 kg per leafMax. door height : 2700 mmMax. door width : 1600 mmDoor thickness : 30 - 40 mmOption : Damping system available
Sliding Door Fittings For Wooden Doors
6.44
Note : For 2 - leaf sliding doors, please order 2 sets of 1 - leaf sliding door fittings
Note : Install the wall fixing element at intervals of 500mm.
Cat. No. Door weight Finish
1 Set without running track For 1 - leaf sliding door 60 940.60.111
100 941.00.111
Running gear, 4-wheel with suspension screw, Hexagon ribbed nut
Suspension, galvanized
Stop with retention stopper,
Fixing Element
Floor Guide, adjustable, plastic
1 Piece
2 Pieces
2 Pieces
2 Pieces
1 Piece
Material Cat. No
Running Track, predrilled Aluminum Blank 1500 941.00.150
1700 941.00.170
2000 941.00.200
2500 941.00.250
6000 941.00.602.02
Silver anodized 2000 941.00.205
2500 941.00.255
6000 941.00.605
Combi-running track, predrilled, for wall and ceiling mounting, 39 x 41 mm (W x H)
Aluminum Blank 2000 941.00.203
2500 941.00.253
3500 941.00.353
6000 941.00.603
Clip-on fascia for running track, 60 mm (H) Aluminum Silver anodized 2500 941.12.425
3500 941.12.435
6000 941.12.460
Clip component for timber and aluminum fascia, predrilled Aluminum Blank 97 940.60.065
Wall mounting bracket with fixing element, for running track with bolts and nuts
Steel Zinc plated 45 940.54.060
Track-connector - U32 x 35 x (120) x 2.5 mm Steel Zinc plated 120 941.00.990
Wall mounting floor guide Steel Zinc plated 81,5 941.00.036
Finish Length
For 1 - leaf door
EKU Porta 60/100 H Set
Set Components
Running Tracks and accessories
6.45
Sliding Door Fittings For Wooden Doors
EKU Porta 60/100 HC for door weights up to 60 kg, 100 kg
Continuously adjustable hold-open force
Wall mounting floor guide
Side-adjustable floor guide
For aluminum, side cover is aluminum
For wood
Clip component
Section Trolley, track buffer and floor guide
Standard floor guide
Bottom Guide
Wall mounting
Wall mounting floor guide
For aluminum, side cover in plastic
Area of Application : For 1-leaf and 2-leaf sliding doorsAdjustable vertically : 3 mmMax. door weight : 60 kg or 100 kg per leafMax. door height : 2700 mmMax. door width : 1600 mmDoor thickness : 30 - 40 mmOption : Damping System available
Sliding Door Fittings For Wooden Doors
6.46
Soft closing damping device for Porta 60/100H and Divido 100/H
Note : For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings
Cat. No. Door Weight kg
Version Finish
1 Set without running track
For 1 - leaf sliding door Version C 60 940.60.111
Version D 100 941.00.111
Running gear,4-wheel with suspension screw, hexagon ribbed nut
For 1-leaf
Suspension, galvanized
Stop with retention stopper
Floor guide, adjustable, plastic
Fixing element 1
Pieces
Pieces
Pieces
Piece
Set
EKU Porta 60/100 HC Set
Set Components
6.47
Sliding Door Fittings For Wooden Doors
Material Cat. No.Length mm
Finish
Running Track, pre-drilled 47.5 x 31 mm (W x H) Aluminum Silver anodized 2500 940.60.825
3500 940.60.835
6000 940.60.860
Clip-on fascia for running track, 60 mm (H) Aluminum Silver anodized 2500 941.12.425
3500 941.12.435
6000 941.12.460
Clip component for wood and aluminum fascia, predrilled Aluminum Blank 97 940.60.065
Limiter for wooden panel Steel Zinc plated 940.60.093
Panel end component set, aluminium anodized, incl.limiter, for aluminium panel
Aluminum Silver anodized 940.60.066
End cap set, plastic anthracite, incl. limiter, for aluminium panel
Plastic Black 940.60.067
Wall mounting floor guide Steel Zinc plated 81,5 941.00.036
Running Tracks and accessories
60/100H -
45/60/100H -
60/100HC -
Sliding Door Fittings For Wooden Doors
6.48
Alu 80/a and Softmaster V2 Alu 80/a For door weight up to 80 kg
By Softmaster Alu 80/a it is really important to keep 20 mm distance between fromwall and door for optimum operation.
Area of application : For 1-leaf and 2-leaf sliding doorsVersion : Secure, non-captive guidance by angled running
surfaces, self-cleaning running trackAdjustment facility : Door height adjustableInstallation : Suspension fitting with screwed-on support flangeDoor weight : 80 kg per doorQuiet running action
NoteSoftmaster V2: When the sliding door runs into pocket, just a slight tip in the edgewill make the door come out a little bit so access to flush handle is possible.
Installation
Running gear and bottom Guide
6.49
Sliding Door Fittings For Wooden Doors
Alu 80/a Softmaster V2 Alu 80/a
For 1 Sliding door, without running track
Note : For 2 sliding doors order 2 sets.
Order Reference : Catalogue numbers refer to 1 piece. Please specify required quantity when ordering individual components.
940.84.001 940.84.003
Cat. No. Suitable for For 1 Door
Running gear with 4-plastic rollers Alu 80/a 940.84.013
Softmaster V2 Alu 80/a
Suspension, screw- fixing Alu 80/a 940.40.020
Softmaster V2 Alu 80/a
Suspension, height adjustable, with M8 bolt Softmaster V2 Alu 80/a 940.46.020
Softmaster V2 Alu 80/a 940.84.040
Running track stopper with rubber buffer
Damping device Softmaster
Softmaster V2 Alu 80/a 940.84.043
Running track stopper with holding force Alu 80/a 940.84.041
Wall buffer Alu 80/a 940.46.051
Alu 80/a 940.40.030
Softmaster V2 Alu 80/a
Material Cat. No.Length mm
Finish
Running track, predrilled Aluminum Blank 1650 940.84.165
2000 940.84.200
2500 940.84.250
3500 940.84.350
6000 940.84.600
nach Ma 940.84.999
Wall fixing bracket 27.5 mm Steel Chrome plated 940.84.071
Wall fixing bracket 40 mm Steel Chrome plated 940.84.072
Bottom guide
Pieces
Pieces
Piece
Piece
Piece
Piece
Pieces
Piece
Piece
Alu 80/a Set
Set comonents
Tracks and accessories
Sliding Door Fittings For Wooden Doors
6.50
Cat. No.
941.35.050
Trolley to fix to door
Closing mechanism
Trolley to fix to running track
Fixing component for expanding Kevlar in the running track
Fixing component with breaking system in the running track
Expanding special cable
Stopper, concealed mounting
Fixing component for expanding Kevlar onto door
For 1-door
Piece
Piece
Piece
Piece
Piece
Piece
Piece
Linear back - running deviceFor door weight up to 50 kg
Area of application : For 1-sliding doorDoor weight : 50 kgUseable with : Alu 80/a
NoteFor a later revision work of the backward-movement after mounting the fittings,you necessarily need a chamber to open, because the expander-cable is anexpendable part which has to check and adjust in constant intervals.The assembly instruction describes the installation of the backward-movement for aright closing door.For a left closing door you have to mount the return-parts inversely.The backward-movement can only be used with the sliding door fitting Alu/80.
Linear closing device in tension
Wall fixing Ceiling fixing
Installation
Set comonents
6.51
Flush Pull Handles for Sliding Doors For wood doors
Packing : 1 pc
Flush pull handle
Version Dim. A mm Dim. B mm Dim. C mm
Withoutaper ture
50 40 12 151.38.011
60 50 12 151.38.012
80 62 14 151.38.013
Version Stainless steel (quality 1.4305), matt brushed
Without aperture 152.51.001
Version Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
Dim. Emm
Without aperture
102 50 90 39 10 152.51.002
175 60 154 39 17 152.51.003
Stainless steel (quality 1.4305), matt brushed
Stainless steel, quality 1.4301, matt brushed
Closed-type Open-type
Material Finish Cat. No.
Stainless Steel Matt Closed - type 902.00.366
Open - type 902.00.740
Function
Flush Pull Handles for Sliding Doors For wood doors
6.52
Flush pull handle
Dim A mm
Dim B mm
Dim C mm
Dim D mm
Dim E mm
Cat. No.
185 70 154 39 17 152.52.002
Dim A mm
Dim B mm
Dim C mm
Dim D mm
Dim E mm
Cat. No.
140 45 95 30 10 152.52.001
Dim A mm
Dim B mm
Dim C mm
Cat. No.
59 40 12 152.50.001
69 50 12 152.50.002
Material : Stainless Steel, quality 1.4305Finish : Matt brushedDelivery : Fixing screws are included
Packing : 1 or 10 pcs
Packing : 1 or 10 pcs
Packing : 1 or 10 pcs
Material : Stainless Steel, quality 1.4305Finish : Matt brushedDelivery : Fixing screws are included
Material : Stainless Steel, quality 1.4305Finish : Matt brushedDelivery : Fixing screws are included
6.53
Flush Pull Handles for Sliding Doors For wooden doors
Flush pull handle
902.00.382
902.00.720
902.00.386
902.00.730
Closed-type Open-type
Closed-type Open-type
Closed-type Open-typeMaterial Finish Cat. No.
Stainless Steel Matt Closed - type
Open - type
Function
Material Finish Cat. No.
Stainless Steel Matt Closed - type
Open - type
Function
902.00.370
902.00.750
Material Finish Cat. No.
Stainless Steel Matt Closed - type
Open - type
Function
Packing : 1 pc
Packing : 1 pc
Packing : 1 pc
Flush Pull Handles for Sliding Doors For wooden doors
6.54
Flush pull handle
Material Cat. No.
Zinc alloy
Finish
Chrome plated matt 151.35.208
Material Cat. No.
Handle : Zinc alloy Back : Steel
Finish
Nickel matt Black matt
151.09.600
Material Cat. No. Brass
Finish Chrome polished
Nickel matt
151.98.200
151.98.600
Finish/colour Cat. No.
Handle: Stainless steel colour ed Inset: Dark brown
151.96.030
Packing : 20 pcs
Packing : 25 pcs
Packing: 1 or 25 pcs
Packing : 1 or 50 pcs
Installation : Fixing without screw, glue fixing
Material : Handle: Zinc alloy, Inset: Leather
6.55
Flush Pull Handles for Sliding Doors For wood doors
Flush pull handle
Bore dimensions
Bore dimensions
Packing: 1, 12 pcs
Material Finish Version Function Cat. No.
Zinc alloy Satin Nickel Without spring Hold in open 161.07.720
With spring Hold in close 161.07.620
Packing: 1, 12 pcs
Material Finish Version Function Cat. No.
Zinc alloy Satin Nickel Without spring Hold in open 161.07.730
With spring Hold in close 161.07.630
Sliding Door Fittings For all - glass doors
6.56
2.5
Infront EKU Clipo 15 GC and GCGFor door weights up to 15 kg for straight or curved doors
Door height : max. 1,200 mm Door width : max. 800 mmFor glass door 6 mmthickness :Material : Plastic running gear, guide and cover capRunning gear : Top running, 1 rollerRunning gear gui - Friction bearing mounted plastic roller, steel axleded by :Door stop : Top stopper, with retainer for sliding into single or
double top running trackInstallation : Running gear for press fitting into drill hole, front plate
for clipping on, without tools (quick fixing system),guide for press fitting into drill hole
Running gear installation
Installation of single running track with curved doors
Bottom guide installation
With radiuses of min. 1,600 mm: Press-fit single running track in pre-milled groove.
Single top running track Double top running track
The single or double top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
6.57
Sliding Door Fittings For all - glass doors
Set
Cat. No .
Model GC, for 2 doors, with installation instructions 405.82.241
Model GCG, for 2 doors, with installation instructions 405.82.248
Suitable for For 2 doors Material Finish/colour
Running gearfor press fitting
4 Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Anthracite
Cover cap with clip
Cover cap with clip
GC 4 Chrome plated matt
GCG 4 Gold colouredpolished
Track sup port 4 Light grey
Light grey
Door stopper with retaining sprino,for top running tracks
GC and GCG
GC and GCG
GC and GCG
4 Grey
Guide, for uide for press fitting
Guide, for press fitting
GC 2
GCG 2 Brown
Length m Cainet topthickness mm
Material Finish Packing m Cat. No.
Single top running track, for screw fixing into groove, with chipboard screwswith countersunk head Ø 2.5 mm
2.5 min. 25 Aluminium Bright
Aluminium Bright
Aluminium Bright
Aluminium Bright
2.5 405.87.002
405.87.003
405.86.002
405.86.003
405.90.002
405.90.003
405.89.002
405.89.003
3.5 3.5
Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
2.5 min. 19 2.5
3.5 3.5
Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm
2.5 min. 25 2.5
3.5 3.5
Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
2.5 min. 19 2.5
3.5 3.5
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order guide and running track separately
Order referenceFollowing fixed curve radiuses (R) for top single running track are available on request:
Sliding Door Fittings For all - glass doors
6.58
2.5
Infront EKU Clipo 15 GKFor door weights up to 15 kg, for sliding doors without drillholes in glass doors
Top running gear and glass fixing profile Installation
Bottom guide installation
Single top running track
Glass fixing profile length = glass door width - 6mm
Double top running track
Door height : max. 1,200 mmDoor width : max. 800 mmFor glass door thickness : 6 mmHeight adjustment : 1 mm at running gear using screwMaterial : Plastic running gear and guide, steel axleRunning gear : Top running, 1 rollerRunning gear guided by : Friction bearing mounted, plastic rollerDoor stop : Top stopper, with retainer for sliding
into single or double top running trackInstallation : Running gear for inserting and screw fixing,
guide for press fitting into drill holeTop glass fixing profile
The single or double top running track can be installed byscrew fixing into groove orclamping into groove with swivel lugs
6.59
Sliding Door Fittings For all - glass doors
Set
Cat. No .
405.82.272
For 2 doors Material Colour Packing pieces Cat. No.
Cat. No.
Running gear, for inserting and screwfixing in top glass fixing profile, height adjustable 1 mm
4 Plastic 1, 100 405.83.936
Track sup port 4 Plastic Light grey
Light grey
Door stopper, with retaining spring,for top running tracks
4 Plastic Grey 1, 100 405.83.132
Guide, for press fitting 2 Plastic 1, 50 405.83.122
2.5 min. 25
min. 25
min. 19
min. 19
2.5 405.87.002
3.5 3.5 405.87.003
2.5 2.5 405.86.002
3.5 3.5 405.86.003
2.5 2.5 405.90.002
3.5 3.5 405.90.003
2.5 2.5 405.89.002
3.5 3.5 405.89.003
Top glass fixing profile, for glue fixing 2.5 Silvercolouredanodized
2.5 405.78.902
3.5 3.5 405.78.903
For 2 doors, with installation instructions
Anthracite
Bright
Length m Cabinet topthickness mm
Material Finish Packing m
Aluminium
BrightAluminium
BrightAluminium
BrightAluminium
Aluminium
Single top running track, for screw fixing into groove, with chipboard screwswith countersunk head Ø 2.5 mm
Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm
Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order glass fixing profile and running track separately
Order referenceOrder UHU Plus endfest 300 epoxy resin adhesive for gluing the glass fixing profile to glass door
Sliding Door Fittings For all - glass doors
6.60
2.5
Infront EKU Clipo 15 GKSFor door weights up to 15 kg, for sliding doors without drillholes in glass doors
Top running gear and glass fixing profile Installation
Installation of bottom glass fixing profile with brush seal
Glass fixing profile length = glass door width - 6mm
Door height : max. 1,200 mmDoor width : max. 800 mmFor glass door thickness: 5 - 6 mmHeight adjustment : 1 mm at running gear using screwMaterial : Plastic running gear and guideDoor stop : Top stopper, with retainer for sliding
into single top running trackInstallation : Running gear for inserting and screw fixing,
guide for press fitting into drill holeTop and bottom glass fixing profile
6.61
Sliding Door Fittings For all - glass doors
Set
Cat. No .
405.82.281
4 Plastic Anthracite
4 Plastic Light grey
Top door stopper, with retaining spring 4 Plastic G rey
2 Plastic Anthracite
End cap, for bottom glass fixing profilewith fixing screw
4 Plastic G rey
2.5 min. 19 Aluminium 2.5 405.81.002
3.5 3.5 405.81.003
2.5 min. 25 Aluminium Bright 2.5 405.87.002
3.5 3.5 405.87.003
2.5 min. 19 Aluminium Bright 2.5 405.86.002
3.5 3.5 405.86.003
2.5 min. 25 Aluminium Bright 2.5 405.90.002
3.5 3.5 405.90.003
2.5 min. 19 Aluminium Bright 2.5 405.89.002
3.5 3.5 405.89.003
2.5 Aluminium 2.5 405.78.902
3.5 3.5 405.78.903
2.5 Aluminium Silver colouredanodized
Silver colouredanodized
Silver colouredanodized
2.5 405.80.002
3.5 3.5 405.80.003
10.0 Artificial hair Grey 10.0 405.80.500
Running gear, for inserting and screw fixing in top glass fixing profile, height adjustable 1 mm
Track sup port
Guide, for press fitting
Top glass fixing profile, for glue fixing
Bottom glass fixing profile, for glue fixing
Brush seal, for sliding into bottom glass fixing profile
Single top running track, for screw fixing beneath cabinet top with chipboard screwswith countersunk head Ø 2.5 mm
Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm
Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood
Single top running track, for screw fixing into groove, with chipboard screwswith countersunk head Ø 2.5 mm
For 2 doors, with installation instructions
For 2 doors Material Colour
Length m
Cabinet topthickness mm
Material Finish Packing m Cat. No.
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order top running track, glass fixing profile and brush seal separately.
Sliding Door Fittings For all - glass doors
6.62
2.5
Infront EKU Clipo 15 GKKFor door weights up to 15 kg,For sliding doors without drill holes in glass doors
Top running gear and glass fixing profile Installation
Top running track installation
Bottom glass fixing profile installation
Door height : max. 1,200 mmDoor width : max. 800 mmFor glass door thickness : 5 - 6 mmHeight adjustment : 1 mm at running gear using screwMaterial : Plastic running gear and guideRunning gear : Top running, 1 rollerRunning gear guided by: Friction bearing mounted plastic roller, steel axleDoor stop : Top stopper, with retainer for sliding
into double top running trackInstallation : Running gear for screw fixing,
guide for press fitting into drill holeTop and bottom glass fixing profile
Glass fixing profile length = glass door width - 6mm
Double top running track,for groove mounting
The top running tracks can be installed by screw fixing beneath cabinet top or into groove clamping into groove with swivel lugs
2 Single top running tracks, forscrew fixing beneath cabinet top
6.63
Sliding Door Fittings For all - glass doors
Set
Cat. No .
405.82.282
Packing pieces Cat. No.
4 Plastic Anthracite 1, 100 405.83.936
4 Plastic Light grey
Door stopper, with retaining spring, for top running tracks 4 Plastic Grey 1, 100 405.83.132
2 Plastic Anthracite 1, 50 405.83.104
Bottom cover for glass fixing profile, with fixing screw 4 Plastic Anthracite 1, 100 405.78.990
Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm
2.5 Aluminium Bright 2.5 405.90.002
3.5 3.5 405.90.003
Double top running track, for clamping into groove with swivel lugs, not suitable for hardwood
2.5 Aluminium Bright 2.5 405.89.002
3.5 3.5 405.89.003
Single top running track, for screw fixing beneath cabinet top with chipboard screws with countersunk head Ø 2.5 mm
2.5 min. 19 Aluminium Silver colouredanodized
2.5 405.81.002
3.5 3.5 405.81.003
Top and bottom glass fixing profile, for glue fixing 2.5 Aluminium Silver colouredanodized
2.5 405.78.902
3.5 3.5 405.78.903
Running gear, for inserting and screw fixing in top glass fixing profile, height adjustable 1 mm
Track sup port
Guide, for press fitting
For 2 doors, with installation instructions
For 2 doors Material Colour
Length m
Cabinet topthickness mm
Material Finish Packing m Cat. No.
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order top running track, glass fixing profile and brush seal separately.
Order referenceOrder UHU Plus endfest 300 epoxy resin adhesive for gluing the glass fixing profile to glass door
Sliding Door Fittings For all - glass doors
6.64
Vorfront EKU Regal B 25 G VFFor door weights up to 25 kg, without drill hole in glass door
Single running and guide track installation
Installation dimensions
Running gear and guide bonding position
Door height : max. 1,800 mmDoor width : max. 1,200 mmfor glass door thickness : 4 - 6 mmHeight adjustment : 2 mm on running gear using eccentricMaterial : Steel running gear and guideRunning gear : Top and bottom running, 1 rollerRunning gear guided by : Plastic coated roller, steel axleDoor stop : Top and bottom stopper, with retainer for sliding
into single running track and guide trackInstallation : Connecting spacer plate for glue fixing, running
gear and guide for screw fixing
With fixing clips With connecting bolt andMinifix connector housing
Running gear, top running Running gear, bottom running
6.65
Sliding Door Fittings For all - glass doors
Set
Cat. No.
405.55.412
For 1 door Material Finish/colour
2 Steel Nickel plated
4 Zinc alloy Chrome plated
4 Plastic Grey
Guide 2 Steel Nickel plated
Fixing 22 Plastic Grey
Safety clip 4 Zinc alloy Bright
4 Plastic Grey
Mounting jig 1 Plastic Black
Finish/colour Packing Cat. No.
2.5 Aluminium Silver colouredanodized
2.5 m 405.69.902
3.5 3.5 m 405.69.903
2.5 Aluminium Silver colouredanodized
2.5 m 405.61.902
3.5 3.5 m 405.61.903
Zinc alloy Bright 1 or 100 pieces 405.45.000
Centre door stopper for cabinets with front running,centre door for engaging in centre position
Plastic Grey 1 or 5 pieces 405.67.070
Door stopper, with retaining spring, for top running tracks
Running gear, with friction bearing height adjustable 3 mm
End cap, for single running and guide track
For 1door, with installation instructions
Single running track, for clipping onto fixing clipsor push fitting with connecting bolts
Single running track, for clipping onto fixing clipsor push fitting with connecting bolts
Connecting bolts, for fixing running and guide tracks
Length m
Material
Connecting spacer plate, for gluing to door
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order guide and running track separately.Order gluing template and UHU Plus endfest 300 epoxy resin adhesive for gluing the connecting spacer plate to the glass door.
Order referenceThe tracks are also available in fixed lengths with appropriate purchase quantities.
Sliding Door Fittings For all - glass doors
6.66
Vorfront EKU Regal B 25 GA VFFor door weights up to 25 kg
Single running and guide track installation
Running gear and guide bonding position
Installation dimensions
Door height : max. 1,800 mmDoor width : max. 1,200 mmFor glass door thickness : 6 mmHeight adjustment : 2 mm on running gear using eccentricMaterial : Steel running gear and guideRunning gear : Top or bottom running, 1 rollerRunning gear guided by : Plastic coated roller, steel axleDoor stop : Top and bottom stopper, with retainer for
sliding into single running track and guide trackInstallation : Front plate for gluing and press fitting into drill
hole, running gear and guide for screw fixing
With fixing clips With connecting bolt andMinifix connector housing
Running gear, top running Running gear, bottom running
6.67
Sliding Door Fittings For all - glass doors
Set
Cat. No.
405.55.312
For 1 door Material Finish/colour
2 Steel Nickel plated
Front plate, for glue fixing,for glass doors wite drill hole
4 Zinc alloy Chrome plated matt
4 Plastic Grey
2 Steel Nickel plated
22 Plastic Grey
4 Zinc alloy Bright
4 Plastic Grey
1 Plastic Black
Lengthm
Mater ial Finish Pac king Cat. No.
2.5 Aluminium Silver colouredanodized
2.5 m 405.69.902
3.5 3.5 m 405.69.903
2.5 Silver colouredanodized
2.5 m 405.61.902
3.5 3.5 m 405.61.903
Zinc alloy Bright 1, 100 405.45.000
Plastic G rey 1, 5 405.67.070
Guide
Fixing clip
Safety clip
Mounting jig
Centre door stopper for cabinets with front running,centre door for engaging in centre position
Door stopper, with retaining spring
Running gear, with friction bearing height adjustable 3 mm
End cap, for single running and guide track
For 1door, with installation instructions
Single running track, for clipping onto fixing clipsor push fitting with connecting bolts
Single running track, for clipping onto fixing clipsor push fitting with connecting bolts
Connecting bolts, for fixing running and guide tracks
Aluminium
Packing : 1 set
Set components(Individual parts)
Tracks and individual components
Order referencePlease order guide and running track separately.Order gluing template and UHU Plus endfest 300 epoxy resin adhesive for gluing the connecting spacer plate to the glass door.
Order referenceThe tracks are also available in fixed lengths with appropriate purchase quantities.
Sliding Door Fittings Accessories - gentle closing
6.68
NoteSoft closing mechanism suitable for sliding doors
EKU Regal BClipo 15, front doorClipo 15, rear door
Installation
Door weight kg Cat. No.
Smuso SD 15 soft closing mechanism 405.12.015
Smuso SD 25 soft closing mechanism 405.12.025
0 - 15
16 - 25
Colour Cat. No.
Cover cap for Smuso 15/SD 25soft closing mechanism
Grey 405.12.250
Silver coloured 405.12.290
Follower bracket, pre-mounted1 = Soft closing mechanism2 = Follower bracket3 = Sliding door4 = Sliding door fitting5 = Cabinet side panel
Cat. No.
Follower bracket for EKU Regal B 405.12.302
Smuso SD 15 / SD 25 Soft closing mechanismFor sliding door fittings, with self closing mechanism
Cover cap For Smuso SD 15 / SD 25 soft closing mechanism
Follower bracket For EKU Regal B
Area of application : For light-weight and medium-weightsliding doors, 0 - 15 kg or 16 - 25 kg
Material : PlasticColour : Light greyInstallation : For recess mounting or screw fixing to cabinet base
Material : PlasticInstallation : For clipping onto soft closing mechanismSuitable for : Left and right
Area of application : For cabinets with 1-leaf sliding doors withEKU Regal B sliding door fitting
Material : SteelFinish : Galvanized
Packing: 1 or 20 pieces
Packing: 1 piece Packing: 1 or 20 pieces
6.69
Sliding Door Fittings Accessories - gentle closing
Installation Installation
Follower bracket, pre-mounted1 = Soft closing mechanism2 = Follower bracket3 = Sliding door4 = Sliding door fitting5 = Cabinet side panel
Follower bracket installation
Cat. No.
Follower bracket for Clipo 15, front door 405.12.301
Follower bracket, pre-mounted1 = Soft closing mechanism2 = Follower bracket3 = Sliding door4 = Sliding door fitting5 = Cabinet side panel
Follower bracket installation
Cat. No.
Follower bracket for Clipo 15, rear door 405.12.300
Area of application : For front sliding door on cabinets withClipo 15 sliding door fitting
Material : SteelFinish : Galvanized
Area of application : For rear sliding door on cabinets withClipo 15 sliding door fitting
Material : SteelFinish : Galvanized
Follower bracket For Clipo 15, front door
Follower bracket For Clipo 15, rear door
Packing: 1 piece Packing: 1 piece
Sliding Door Fittings Accessories - gentle closing
6.70
NoteSoft closing mechanism suitable for sliding doors
Vorfront Silent-VF 40Mixfront Rotula 40/75Vorfront Rotula 50
Area of application Cat. No.
For door weights up to 25 kg 405.11.106
For door weights up to 50 kg 405.11.107
Cat. No.
Spacer plate 405.11.194
Smuso CD 25/CD 50 Soft closing mechanismFor sliding door fittings, with self closing mechanism
Spacer plate
Area of application : For sliding door weights up to 50 kgMaterial : PlasticColour : Light greyInstallation : For screw fixing beneath or to the cabinet topMounting : For DIN left hand and DIN right hand use
Material : PlasticColour : GreyInstallation : For screw fixing beneath cabinet topMounting : For DIN left hand and DIN right hand use
Packing: 1 or 20 pieces
Packing: 1 or 250 pieces
6.71
Slido Sliding Door Fittings - For glass doors
HAWA Junior 80/GL for Door weights up to 80 kg
Features: For 1- and 2-leaf sliding doorsFor unobtrusive, straight-running sliding glassdoorsEfficient, cost-effective and highly reliableRattle-proof bottom guides ensure quiet runningand keep doors steady in the presence of draftsEasy to install hardware and absolutelydependableAluminium cover plates for the slim glassretention profile fit easily, using rubber clips.Track stop with adjustable retainerVertical adjustment without removing the glassdoorCan be combined with HAWA Toplock and walljoint profile, and HAWA Junior angle profile forwall fixingPositive-fitting glass fixing for maximum safetyand reliability
Max. door weight : 80 kg per door leafAdjustment : 3 mm verticallyGlass thickness : 8 and 10 mmProfile height : 65 mmMaterial : Running gear with nylon rollers
Floor guide free of play: Aluminium with plasticinsert
GH = Glass heightSTH = Panel height
Glass door preparation GB = Glass widthGH = Glass heightSTB = Panel width
Slido Sliding Door Fittings - For glass doors
6.72
For 1-leaf sliding door Cat. No.
Running gear 2-wheel, M10 940.80.012
Suspension plate with hanger bolt M10 940.80.017
Track buffer with retainer 940.80.041
Glass retainer profile 240 mm 943.31.020
Cover caps for glass retainer profile (1 horizontal profile) 940.40.064
Fixing set for 2 glass retainer profiles (1 horizontal profile) 940.40.098
Allen key 940.40.097
2
2
2
2
1
1
1
Cat. No.
For 1- Leaf Sliding Door 940.81.005
Material Finish Length mm Cat. No.
2 cover profiles for 1 horizontalprofile, including clip-on rubber
Aluminium Mill 1200 940.41.402
Clear anodised 1200 940.41.405
Brushed stainless steel effect
1200 940.41.408
For glass retainer profile For 8 mm glass 940.41.050
For 10 mm glass 940.41.052
Fitting instruction for planning and installation
732.29.092
Material Finish Length mm Cat. No.
Running track, drilled HAWA-Junior 80
Aluminium Clear anodised 6000 940.80.600.1
HAWA Junior 80/GL Fitting Set
Set Components
Accessories
Running Tracks
Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings.
6.73
Slido Sliding Door Fittings - For glass doors
HAWA Junior 80/GP for Door weights up to 80 kg
Area of application : For 1- and 2-leaf sliding doorsFeatures : Low installation height
Height adjustable door leavesPatch fixing with glass patch retainerSuspension with suspension boltLow wear and tearQuiet running actionLGA tested to 100,000 cycles (EN1527).
Max. door weight : 80 kg per door leafGlass thickness : 8, 10 and 12 mmAdjustable vertically : 3 mmMateria l: Running gear with nylon rollers
Floor guide free of play: Aluminium withplastic insert
Glass door preparation
Slido Sliding Door Fittings - For glass doors
6.74
For 1-leaf sliding door Cat. No.
Running gear 2-wheel, M10 940.80.012
Suspension bolt M10 and mounting screws 940.80.023
Glass patch retainer 940.40.038
Track buffer with retainer 940.80.041
One-way drilling jig 940.40.089
Rubber wall buffer 940.40.051
Height adjusting pin 940.40.090
Cat. No. For 1-Leaf Sliding Door 940.81.006
Material Finish Length mm Cat. No.
Running track, drilled HAWA-Junior 80
Aluminium Clear anodised 6000 940.80.600.1
2 Pieces
2 Pieces
2 Pieces
2 Pieces
1 Piece
1 Piece
1 Piece
HAWA Junior 80/GP Fitting Set
Set Components
Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittingsThe floor guide and cover caps need to be ordered separately.
Note : Catalogue numbers refer to 1 piece. When ordering individual components, please specify the required quantity.
Running Tracks
6.75
Slido Sliding Door Fittings - For glass doors
Cat. No.
Version 1Floor Guide, rattle proof,for 8,10,12 (12.7) mm glass
Version 4Patch suspension with glass holder insert(VSG/ESG)
940.40.038
Version 2
Bottom guide channel,20 x 20 x 3 mm, predrilled
Aluminum Silver anodized 6000 407.80.901
Self-adhesive sliders for 8 mm glass,20 x 20 x 3 mm
940.40.033
Self-adhesive sliders 10 mm glass,20 x 20 x 3 mm
940.40.034
Material Finish Length mm
Version 3Patch suspension with glass holder insert(VSG/ESG)
940.40.038
Steel Chrome matt 940.40.032
Guide slider, rattle proof, with mounting screws, suitable for patch suspension
940.40.035
Bottom guide channel, 24 x 24 mm, undrilled Aluminium Silver anodized 6000 940.81.600
Order-made 940.81.999
Stop bumper, 24 x 24 mm Aluminium Silver anodized 940.80.051
940.40.039
Aluminium Silver anodized 2500 940.41.725
3500
6000 940.41.760
Set of fixing parts for single bottom guide(2 pcs per meter)
Spring bottom guide for point fixing, incl.mounting screws
Single bottom guide track
Plastic Black 404.97.990
Cover Caps for HAWA Junior 40, 80, 120 and 160/GP
Material Finish Packing Cat. No.
Cover cap square (2 pieces required for each glass patch retainer)
Plastic Chrome satin (4 ) 940.41.028
Stainless steel colour 1 (4 ) 940.41.027
Raw 1 940.41.024
Cover cap round (2 pieces required for each glass patch retainer)
Plastic Chrome satin 1 (4 ) 940.40.027
Brass polished 1 (4 ) 940.40.028
Stainless steel colour 1 (4 ) 940.40.023
Chrome polished 1 (4 ) 940.41.029
Raw 1 940.41.023
Slido Sliding Door Fittings - For glass doors
6.76
HAWA Side-Fix Angle ProfileFor HAWA Junior 40, 80 and 120 Running Tracks
~50 ~220
®™ 4 - 5
Features : Elegant design with concealed fixingContinuous profile for simple levelingEasy and quick to installNo drilling of running track or angle profilerequiredNo additional support structure requiredFor use with Junior 40, 80 and 120 glasssliding fittings
Max. door weight : 40 kg, 80 kg or 120 kg per door leaf
HAWA Junior 40
HAWA Junior 80
HAWA Junior 120
Easy and quick installation of angle profile and running track
6.77
Sliding & Folding Door Fittings
For Wall Mounted Sliding Door Applications With HAWA Junior 40 Running Tracks
Material Finish Length mm Cat. No.
Clear anodised 2000 940.40.201
4000 940.40.401
6000 940.40.601
Cut to size 940.40.991
Aluminium
sufficient 2000 mm track length)Set of 10 pieces 940.40.099
Cover caps, for angle p rofileand running track
Plastic Grey 1 pair 940.40.061
Anthracite 1 pair 940.40.065
Material Finish Length mm Cat. No.
Aluminum Clear anodised 2500 940.80.2514000 940.80.401
6000 940.80.601
Cut to size 940.80.991Track fixing parts (10 pieces
Track fixing parts (20 pieces
Set of 10 pieces 940.40.099
Cover caps, for angle p rofileand running track
Plastic Anthracite 1 pair 940.80.065
Material Finish Length mm Cat. No.
Angle profile, pre-drilled
Angle profile, pre-drilled
Angle profile, pre-drilled
Track fixing parts (10 pieces
Angle profile, pre-drilled
Aluminum Clear anodised 4000 941.20.4036000 941.20.603
Cut to size 941.20.992
sufficient for 6000 mm track length)Set of 20 pieces 941.20.099
Cover caps, for angle p rofileand running track
Plasti c Anthracite 1 pair 941.20.065
sufficient 2500 mm track length)
With HAWA Junior 80 Running Tracks
With HAWA Junior 120 Running Tracks
Note : Running tracks and fitting sets have to be ordered separately
Flush Pull Handles For glass doors
6.78
For glass thickness mm Brass chromeplated matt
8 981.10.040 981.10.047
10 981.10.041 981.10.048
For glass thickness mm Stainless steel Brassmatt
chromeplated matt
8 981.10.050 981.10.057
10 981.10.051 981.10.058
For glass thickness mm Silver coloured Stainless steelcoloured
904.00.451 904.00.452
901.01.224 901.01.226
Stainless steelmatt
For glass thickness mm Stainless steelcoloured
Silver coloured
Flush pull handle, closed type
Flush pull handle, open type
Flush pull handle
Flush pull handle
Area of application : For glass thickness 8 or 10 mmDrill hole Ø : 55 mmInstallation : For clamp fixing
Area of application : For glass thickness 8 or 10 mmDrill hole Ø : 55 mmInstallation : For clamp fixing
Area of application : For glass thickness 8 - 10 mmMaterial : AluminiumDrill hole Ø : 11 mmInstallation : For screw fixing to one side, screws visible
Area of application : For glass thickness 8 - 10 mmMaterial : BrassInstallation : For screw fixing to one side, screws visible
Opening size
6.79
Wooden folding sliding Doors
Vorfront FT 2 VF 35For door weights up to 17.5 kg (35 kg per pair of doors)
Door width : max. 450 mmDoor thickness : 19 - 27 mmHeight adjustment : 2 mm on running gearRunning gear : Top running, 2 rollers,Running gear guided by : Friction bearingVersion : Free movingInstallation : Running gear for clip fixing into running track
without toolsFitted door leaves can be combined to door leaf pairs usingdetachable panel to panel hinges with removable pin
Door width calculation
Running and guide track dimensions
Running track
A = Only when using door deflector
max. door thickness
LK = internal cabinet widthSL = track lengthFB = door widthA = door overlayF = gap width
FB = LK + (2 x A) - (number of gaps x F mm)number of door leaves
Guide track
Installation
Wooden folding sliding Doors
6.80
Cat. No.
410.26.049
Set consists of:For 1 pair of doors
Material Finish/colour Cat. No.
1 piece Steel Galvanized 410.26.107
1 piece Steel Galvanized 410.26.106
Guide, left, with stopper, bottom running,4 rollers, friction bearing mounted
Guide, right, with stopper, bottom running,4 rollers, friction bearing mounted
1 piece Steel Galvanized 410.26.205
1 piece Steel Galvanized 410.26.204
Panel to panel hinge, can be detached,with removable steel pin
3 pieces Zinc alloy Nickel plated 410.25.402
Door deflector, installation in pairs 2 pieces Plastic Glass clear 410.25.403
End stop follower for running and guidetrack, suitable for right hand andleftt hand use, including screw andconnecting sleeve
4 pieces Rubber Black 410.26.302
For 1 pair of doors, with installation instructions
Running gear, left, with 2 stoppers, toprunning, 2 rollers, friction bearing mounted
Running gear, right, with 2 stoppers, toprunning, 2 rollers, friction bearing mounted
Set
Set components(Individual parts)
Packing : 1 set
Packing : 1 or 20 pieces
Order referenceThe fixing material, running tracks and guide tracks are not included in the set. Please order separately.
6.81
Wooden folding sliding Doors
Tracks and individual components
Length Material Finish/colour Cat. No.mm
Running track, not drilled 2500 Aluminium Bright 410.26.612
5000 410.26.605
Guide track, not drilled 2500 Aluminium Bright 410.26.622
5000 410.26.805
Steel Galvanized 410.26.105
Steel Galvanized 410.26.104
Steel Galvanized 410.26.201
Steel Galvanized 410.26.200
Stoppe, for running gear and guide,suitable for lefe hand and right hand use
Plast ic Black 410.26.301
Steel 410.26.400
Guide, left, with stopper, bottom running,4 rollers, friction bearing mounted
Guide, right, with stopper, bottom running,4 rollers, friction bearing mounted
Running gear, left, without stopper, toprunning, 2 rollers, friction bearing mounted
Running gear, right, without stopper, toprunning, 2 rollers, friction bearing mounted
Connecting sleeve, for connecting do orleaf pairs
Packing : 1 or 20 pieces
FT 2 VF 35
Wooden folding sliding Doors
6.82
Vorfront FT 2A VF 25For door weights up to 12.5 kg, (25 kg per pair of doors), attached at the side
Door width : max. 500 mmDoor thickness : 19 - 27 mmHeight adjustment : 2 mm on running gearRunning gear : Top running, 1 roller,Running gear guided by : Friction bearingVersion : Attached at the sideInstallation : Running gear for clip fixing into running track
without toolsFitted door leaves can be combined to door leaf pairs using detachable panel topanel hinges with removable pinGuide, bottom running, 4 plastic rollers, with 1 concealed hinge
Version with panel to panel hinge offset by 6 mm
Version with inset guide track
max. door thickness
Running and guide track dimensions
Running track
A = Only when using door deflector
Example with 110 hinge, panel to panel hinge off centre = 6 mm
Guide track
Installation
6.83
Wooden folding sliding Doors
Cat. No.
410.26.050
1 piece Steel
Steel
Steel
Steel
Galvanized 410.26.103
1 piece Galvanized 410.26.102
1 piece Galvanized 410.26.203
1 piece Galvanized 410.26.202
6 1 pieces Zinc alloy 410.25.402
2 1 pieces 410.25.403
Guide, left, with stopper, bottom running,4 rollers, friction bearing mounted
Guide, right, with stopper, bottom running,4 rollers, friction bearing mounted
Panel to panel hinge, can be detached,with removable steel pin
Door deflector, installation in pairs
Running gear, left, with stoppers, toprunning, 1 rollers, friction bearing mounted
Running gear, right, with stoppers, toprunning, 2 rollers, friction bearing mounted
Set consists of:For 2 pairs of doors
Material Finish/colour Cat. No.
Nickel plated
Plastic Glass clear
For 2 pairs of doors (left/right) with installation instructions
Set
Set components(Individual parts)
Packing : 1 set
Packing : 1 or 20 pieces
Order referenceThe fixing material, running tracks and guide tracks are not included in the set. Please order separately.
FT 2A VF 25
Wooden folding sliding Doors
6.84
Running track, not drilled
Guide track, not drilled
Stoppe, for running gear and guide,suitable for lefe hand and right hand use
Guide, left, with stopper, bottom running, 4 rollers, friction bearing mounted
Guide, right, with stopper, bottom running, 4 rollers, friction bearing mounted
Running gear, left, without stopper, top running, 1 rollers, friction bearing mounted
Running gear, right, without stopper, top running, 1 rollers, friction bearing mounted
Length Material Finish/colour Cat. No.mm
2500 Bright 410.26.612
5000 410.26.605
2500 Bright 410.26.622
5000 410.26.805
Steel
Steel
Steel
Steel
Galvanized 410.26.101
Galvanized 410.26.100
Galvanized 410.26.201
S Galvanized 410.26.200
Plastic Black 410.26.301
Aluminium
Aluminium
Tracks and individual components
Packing : 1 or 20 pieces
6.85
Wooden folding sliding Doors
Adjustment
FDO-3 Bifold FittingsMax. weights for 2 doors up to 30 kg
Door thickness : Min.16 mmHeight adjustment : 3 mm at running gear using screwMaterial : Upper track : Aluminum, Upper running roller : steel,
plasticCenter hinge, concealed hinge : Steel, nickel platedCenter fixing fittings : Plastic
Smooth & easy sliding
( )
,
2 mm2 mm
4 mm
, ,
.( 3 mm)
.
.
2 mm2 mm
4 mm
2 mm2 mm
4 mm
Cat. No.
409.55.799
+ 409.55.400
409.55.410
( 1 set) 409.55.420
6.87
Folding Door Fittings for Wood Doors
Running gear, with nylon wheels
Suspension plate, M10 bolt and mounting screws
Upper pivot, M10
Lower pivot, M8
Butt hinge*
Height adjusting pin
Stop bracket, with rubber buffer
For 2-leaf
2 Pieces
2 Pieces
1 Piece
1 Piece
3 Pieces
1 Piece
1 Piece
For 2 -Leaf Folding Doors
Without Running Track, Without Guide Channels 407.58.003
Material Finish Length mm Cat. No. Running track, pre-drilled Aluminium Clear anodised 6000 940.80.600.1
Bottom guide channel,
pre-drilled, 20 x 20 x 3 mm
Aluminium Clear anodised 6000 407.80.901
Butt hinge Steel Galvanised 407.78.989
Fitting instructions for planning and installation
732.24.014
HAWA Bifold 40 Fitting Set
Set Components
Running Tracks and accessories
* Butt hinges included in fitting set are for a maximum door height of 2200 mm Please order additional hinges based on the chart below:
Door height Hinges requiredUp to 2700 mm = 4Up to 3200 mm = 5
6.88
Application matrix
The following table shows an overview of the weight per square metre [kg/m2]in accordance with the material that is used:
Material Weight percubic metrekg/m3
3.00
3.20
4.00
5.00
6.00
8.00
10.0
0
13.0
0
16.0
0
19.0
0
22.0
0
25.0
0
28.0
0
30.0
0
38.0
0
Chipboard 4.50 6.00 7.50 9.75 12.00 14.25 16.50 18.75 21.00 28.50
Chipboard, coated 4.80 6.40 8.00 10.40 12.80 15.20 17.60 20.00 22.40 30.40
Hard fibreboard,untreated
1.12 1.40 1.75 2.10
MDF board, untreated 900
650 -- 750500 -- 800
230 -- 350
520 -- 550500 -- 800
9.00 11.70 14.40 17.10 19.80 22.50 27.00
Blockboard, untreated 7.15 8.80 10.50 12.10 13.75 16.50
Veneer board 3.20 4.00 4.80 6.40 8.00
Glass 2500 7.50 10.00 12.50 12.50 20.00 25.00
Solid wood, spruce approx. 450 7.20 8.55
Solid wood, beech approx. 700 11.20 13.30
Solid wood, oak approx. 680 10.88 12.92
Solid wood, teak approx. 620 9.92 11.80
Solid wood, pine approx. 550 8.80 10.50