sl500 modular library system
DESCRIPTION
SL500 Modular Library System. Objectives. Locate needed information. Define the safety and ESD requirements. Identify and locate major components. Unpack , install & configure the library. De-install the Library. Configure switches, bridges and hubs. - PowerPoint PPT PresentationTRANSCRIPT
SL500 Modular Library System
Objectives
• Locate needed information.• Define the safety and ESD requirements. • Identify and locate major components.• Unpack , install & configure the library.• De-install the Library.• Configure switches, bridges and hubs.• Label and route cables drives to other
equipment.• Verify and /or install library firmware.
Objectives• Setup and operating performance.• Diagram and document the installation.• Update the site logs to reflect the customer’s
subsystem configuration.
Prerequisites• SL500 Principles of Operation• SAN Concepts and Connectivity.• L-Series Library course.• LTO Ultrium course.• SDLT course.
Personal Safety• Safety Precautions• Lifting Techniques• Shoulder, Elbow, Wrist, and Hand Safety• Fiber -optic Safety • Rack Safety
Product Precautions• Electrostatic Discharge (ESD) Damage
PreventionESD PrecautionsESD Protection Procedure
Prepare the work AreaAccess the EquipmentReplace componentsCleanup
• Fiber – optic Cable InstallationCable routingCable ManagementConnector protection
Planning the Installation• General Information
Prepare the Installation locationKnowledge in SCSI principlesKnowledge in Fibre channel principlesConfiguration Diagram
SL500 Tape Library Types• Library with LTO Cartridge Slots• Library with Mixed-Media Cartridge Slots
Library with LTO Cartridge Slots• The Base module contains
50 cartridge slotsOne or two tape drives5 – slot cartridge access port(CAP)
Library with LTO Cartridge Slots base module
LTO Slot Physical Configurations
• Slot Numbering scheme Four Integers
1. Library number 2. Library module number3. Library row number4. Library column number
Library with Mixed - Media Cartridge Slots
Library and Rack Dimensions
Library and Rack Dimensions
Library Components Weights
Library Environment Specifications
Power for Library Without Tape Drives
Power for Base Unit and Two LTO Tape Drives
Installing EZ Hardware Compatibility Issues
Installation Steps Unpacking Inspection Preparation of Rack Install Base Unit Install Robotics Unit Install Façade Install an Expansion Module Install the Drive Tray Assemblies Install the Power Cables Install the Library SCSI or Fiber Channel Cables Inserting Cartridges Locking the Front Door and Powering-on the Library
Base Module Accessory Kit
Expansion Module Accessory Kit
SCSI Cabling
Fiber Channel Cabling
Inserting Cartridges
Powering - on the Library
Recording the Configuration
Library Configuration Information
Recording the Configuration
Tape Drive Configuration Information
Security & Password
FRU and Spares Replacement Library FRU list Drive FRU list
Library FRU List Cards
MPU2 MPW RLB RLC RLE RLM
Fans Operator Panel Power Supply Robotics unit
Drive FRU list
Drive FRU List• RLD Card• Fan• Tape Drive Brick
Remote Access Tools• Stream Line Library Console• Service Delivery Platform(SDP)• Motive Insight• ACSLS