skidgines pumper cats soft tracks. aftermarket equipment certification

24
SKIDGINES PUMPER CATS SOFT TRACKS

Upload: theresa-mckinney

Post on 17-Dec-2015

214 views

Category:

Documents


1 download

TRANSCRIPT

SKIDGINES

PUMPER CATS

SOFT TRACKS

AFTERMARKET EQUIPMENTCERTIFICATION

ADDITIONAL FORM

PUMP REQUIREMENTSThe pump may be an auxiliary powered pump or a power take-off pump.

All pumps must have a discharge pressure gauge.

If the pump is of the positive displacement type, a bypass or pressure relief valve shall be provided.

The pump, as mounted, shall be capable of drafting water from a source located 10 feet vertical distance below the pump head through the required 20 feet of suction hose.

The contractor may substitute a portable pump capable of filling the unit if the mounted pump cannot fill the tank.

TANK REQUIREMENTS

Tank shall be securely attached to the chassis in such a way to withstand pitch and roll of the load during off road operation of the unit without damaging the tank or other chassis components.

All hardware must be rated to handle the load it is securing.

No fiberglass or plastic tanks will be accepted unless surrounded by steel to prevent puncture damage.

Tanks shall be equipped with partitions that reduce the shifting of the water load.

MINIMUM STANDARDS FOR SKIDGINES TYPE 1 2 3 4

TANK CAPACITY (GAL)MINIMUM

MAXIMUM1200

NONE8001199

400799

200399

FLYWHEEL HORSEPOWER 176+ 75-175 100+ 60-99

PUMP MIN. FLOW (GPM) 50 50 30 30

@ RATED PRESS. (PSI) 100 100 70 70

PUMP & ROLL YES YES YES YES

FOAM PROP. SYSTEM OPT. OPT. OPT. OPT.

WINCH OR GRAPPLE NOT REQ. NOT REQ. OPT. OPT.1

HOSE REEL (FEET)1” - ¾” ID 150 150 150 150

1½” LINEN HOSE (FEET) 300 300 - -

1” LINEN HOSE (FEET) 300 300 200 200

DISCHARGE OUTLET 1½” NH 1½” NH 1” NPSH 1” NPSH

PERSONNEL REQUIRED 1 1 1 1

HARD LINE

PRESSUREGAUGE

DUMP VALVE

DISCHARGEOUTLET

BACKUP LIGHTS

DUMPVALV

E

Super Skidgines

MINIMUM STDS FOR PUMPER CATS

TYPE 1 2 3

TANK CAPACITY (GAL)MINIMUM

MAXIMUM500

NONE325499

200324

FLYWHEEL HORSEPOWER 200 100-199 60-99

PUMP MIN. FLOW (GPM) 30 30 30

@ RATED PRESS. (PSI) 70 70 70

HOSE REEL (FEET)1” - ¾” ID 150 150 150

1” LINEN HOSE (FEET) 200 200 200

DISCHARGE OUTLET 1” NPSH 1” NPSH 1” NPSH

PUMP & ROLL YES YES YES

FOAM PROP. SYSTEM OPTIONAL OPTIONAL OPTIONAL

WINCH OR GRAPPLE OPTIONAL OPTIONAL OPTIONAL

PERSONNEL REQUIRED 1 1 1

DUMP VALVE

DISCHARGE VALVE

PRESSUREGAUGE

HOSE REEL

MINIMUM STDS FOR SOFTTRACKS

TYPE 1

TANK CAPACITY (GAL)MINIMUM

MAXIMUM600

NONE

FLYWHEEL HORSEPOWER 170+

PUMP MIN. FLOW (GPM) 30

@ RATED PRESSURE (PSI) 70

HOSE REEL (FEET)1” - ¾” 150

1” LINEN HOSE (FEET) 200

DISCHARGE OUTLET 1” NPSH

PUMP & ROLL YES

FOAM PROP. SYSTEM OPTIONAL

WINCH OR GRAPPLE OPTIONAL

PERSONNEL REQUIRED 1

PERSONAL PROTECTIVE EQUIPMENT

Fire shelters

Nomex Shirt & Pants

Hardhat

Gloves

Boots

OTHER PERSONAL EQUIPMENTREQUIRED

Eye Protection

Hearing Protection

Headlamp