sinamics v90 & simotics s-1fl6 sales slides...unrestricted / © siemens ag 2013. all rights...
TRANSCRIPT
-
Unrestricted / © Siemens AG 2013. All Rights Reserved. siemens.com/answers
SINAMICS V90 &
SIMOTICS S-1FL6 Sales Slides
The performance-optimized and easy to use servo system
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 47
• Applications 39
• Customer benefits 32
• Product 9
• Introduction 2
SINAMICS V90 & SIMOTICS S-1FL6
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Introduction
Introduction
General Description of the Product Family
Overview about the Portfolio
Positioning within the Portfolio
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS,
the optimum drive for every destination
Whether it‟s a matter of efficient
pumping, ventilating and compressing,
or precise movement, processing, or
machining, the number of application
areas for frequency converters is
almost endless. So it‟s good that there
is one family of drives for all of these
areas that perfectly fulfills every
requirement: SINAMICS. Our portfolio
represents uniform engineering,
extremely high efficiency and
convenient operation.
Pumping,
Ventilating
Compressing Moving
Machining Processing
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SIMOTICS,
the optimum motor for each and every application
With SIMOTICS, Siemens provides the
most comprehensive portfolio of electric
motors worldwide.
The following are included in this
portfolio:
Energy-efficient low-voltage motors
Servo and torque motors with high
dynamic performance
Well-proven DC motors
Powerful high-voltage motors
Innovative drive technology for all
sectors, applications and performance
classes.
Outstanding performance, quality,
efficiency and compactness.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS Family of Drives
Overview of the Portfolio
V-Serie G-Serie S-Serie
General Servo General Servo
Application Example
Requirements Basic Performance plug 'n play
Ruggedness
General Performance Application-optimized variance
High Usability
High Performance
Highest Functionality
Innovation Driver
Closed-loop Control
Performance
(TIA) Totally Integrated
Automation integration -
Energy Recovery
Topology -
Integrated Safety
Functions -
Standard Mid-range High-end
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V
V20
0.12 – 15 kW
Basic, cost-effective, easy-to-
operate compact drive (1/3
AC).
SINAMICS Family of Drives
Overview of the Portfolio
SINAMICS G – Family of Drives
G120C G120 G120P G110D/G120D
0.55 – 18.5 kW 0.37 – 250 kW 0.37 – 90 kW 0.75 – 7.5 kW
The compact drive
system
The modular
application-specific drive system
The pump, fan and
compressor drive
(IP20/55)
The distributed
conveyor technology
specialists (IP65)
SINAMICS S - Family of Drives
S110 S120
Single-axis (AC/AC) Single-axis (AC/AC) Multi-axis (DC/AC)
0.1 – 90 kW 0.12 – 250 kW 0.12 – 1200 kW
The basic single-axis positioning
drive
The specialist for high dynamic performance and complex
drive applications
V90 & S-1FL6
Single-axis (AC/AC)
0.4 – 7kW
The performance-optimized
and easy to use servo system
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 47
• Applications 39
• Customer benefits 32
• Product 8
• Introduction 3
SINAMICS V90 & SIMOTICS S-1FL6
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Product
Overview Description of the Product
SINAMICS V90 & SIMOTICS S-1FL6
Designed for motion control
applications to meet general purpose
servo application, considering the
cost and time-to-market challenges
for machine builders and system
integrators.
The SINAMICS V90 drive works only
together with the SINAMICS S-1FL6
motor. Therefore this both units are
working perfectly together to ensure
plug-and-play commissioning,
optimized servo performance, quickly
integration with SIMATIC PLC and
more reliability.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6, for single axis
servo control with dynamic performance
Moving
Verarbeiten
Auxiliary drives
Machine building
Handling
Recycling Machining
Processing
Drilling
Sawing
Milling Rack feeder Tool changers
Packaging
machine
Winding &
unwinding
Printing
machine
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6. The
performance-optimized and easy to use servo system
SINAMICS V90 & SIMOTICS S-1FL6
Benefits for the customers Specific product features
All in one: Positioning with pulse train set-point, internal
positioning, Speed- and Torque control mode
Comprehensive range of applications
with only one converter type
Advanced auto tuning Achieving quickly and conveniently
optimal drive operation
Easy setup software PC-tool: Graphic aid to
configuration, commission and diagnose
The PC-tool “SINAMICS V-ASSISTANT” make the
configuration and diagnostics quick and easy
Built-in braking resistor to dissipate the regenerative
power for fast ramp down No need additional braking resistor for most application
Safety Integrated: Safe Torque Off (STO) that prevent
unexpected re-start
Time and cost savings because of integrated safety
function
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
• Overview Description of the Product
• For which Applications
• Highlights (Top 5)
• Technical Data / Functionality
• Communication
• Options
• Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SIN
AM
ICS
V90
Cab
le/
Co
nn
ecto
r
SIM
OT
ICS
S-1
FL
6
• SINAMICS V90 in the power range of 0.4kW
to 7kW (3AC 380V~480V)
• Control modes: Position, speed, torque,
internal positioning (EPos)
• Works only together with SIMOTICS S-1FL6
• Siemens fabricated 50pin set-point cable
(V90 to PLC)
• Siemens fabricated power cable
• Siemens fabricated encoder cable
• Siemens fabricated holding brake cable
• Connectors (assembling by customer)
• SIMOTICS S-1FL6
(0,4 to 7kW / 1.27-33.4Nm)
• Plan shaft end/ Half key balanced shaft end,
with or without holding brake
• Incremental encoder TTL 2500ppr
• Absolute encoder 20bits, 12bits multi-turn
SINAMICS V90 & SIMOTICS S-1FL6
Component Overview
+ +
SIMOTICS S-1FL6
Cables/ Konnektors
SINAMICS V90
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90
Technical overview
Hardware
USB interface (to connect with V90 PC-
Commissioning-Tool)
Slot for SD memory card
Digital I/Os
Analog I/Os
Safety Integrated
Safe Torque Off (STO)
With activated STO no torque is produced
by the motor and a start of the motor is
prevented.
Control interface
Pulse train input (PTI)
Encoder emulation
Digital and Analog I/Os
Motor control procedures
Position control via PTI, with torque
and speed limitation
Position control via internal traversing
blocks, 8 internal position values
selectable via DI‟s
Speed control (S), via analog input or
fixed internal speed set-point, with torque
limitation
Torque control (T), via analog input or
fixed internal torque set-point, with speed
and torque limitation
Control change mode: e.g. change from
Position control to speed control on-the-
fly
JOG, control via OP buttons
Operator panel
Build-in
6-digit / 7-Segment display
5 buttons
2 status LED„s
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90
Technical data
Power and Control
Operating voltage Main voltage: 3AC 380V … 480V, (-15% / +10%)
Control voltage: DC 24 V (-15%/+20%)
Input frequency 50/60Hz, (-10% / +10%)
Supply network TN, TT, IT, TT earthed line
Power range 0.4 ... 7kW (3AC 380 - 480V +/-10%)
Overload without initial load: 300% rated output current for 2s of every 10s
with initial load: 300% rated output current for 0.3s of every 10s
Control methods • Pulse train input position control (PTI), with torque and speed limit
• Internal position control (IPos), set-points selection via combination of
digital input (traversing blocks)
• Speed control (S), via analog input or fixed internal speed set-point, with
torque limit
• Torque control (T), via analog input or fixed torque internal set-point, with
speed and torque limit
• Control change mode: e.g. change from Position control to speed control
on-the-fly via digital input
• JOG, jog via BOP
Breaking Resistor Built-in (an optional external resistor can be connected to the V90 if shorter
ramp down times are needed)
SD card SD card for parameter cloning and FW update
Signal inputs and outputs
USB Mini USB
Pulse train input 2 channel, one exclusively for 5V differential signal, one for 24V single end
signal
Pulse train encoder
output
5V differential signal, A,B,Z phase
Digital inputs/Outputs 10 inputs, NPN/PNP; 6 outputs, NPN
Analog outputs 2 Analog outputs, output voltage range +/-10V, 10bits
Ambient conditions, limitations
Degree of
protection
IP20
Environmental
Class / Chemical
pollutants
Class 3S2
Cooling ≤ 1kW Natural cooling
> 1kW Fan cooling
Temperature 0 °C to 45 °C, without power derating
45 °C to 55 °C: The power derated up to 20% at 55 °C
Installation
altitude
≤ 1000 m (without power derating);
> 1000 m and up to 5000 m (with power derating)
Standards
Standard
conformity CE
Safety Integrated Safe Torque Off STO
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90
Dimensions
Frame size AA
Frame size B
Frame size A
Frame size C
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SIMOTICS S-1FL6, the suitable motor
Technical overview
Easy maintenance
Split type design absolute encoder
enable exchanging encoder on site easily
High robustness
IP65 protect to complete motor
Metal connecter enhance the reliability
Shaft with sleeve to increase oil seal life
time
Easy installing :
Quick lock/release connection for
encoder and brake connectors
Rotatable power connector
Optimized performance
High-performance magnets and low
cogging ensures motor running more
stable
Braking at Non-drive end eliminates axial
movement, and increase the accuracy
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SIMOTICS S-1FL6
Technical data
neue motors
Motor specification
Order number 1FL6 042− 1AF 044− 1AF 061− 1AC 062− 1AC 064− 1AC 066− 1AC 067− 1AC 090− 1AC 092− 1AC 094− 1AC 096− AC
Rated power [kW] 0.4 0.75 0.75 1 1.5 1.75 2 2.5 3.5 5 7
Rated torque [N∙m] 1.27 2.39 3.58 4.78 7.16 8.36 9.55 11.9 16.7 23.9 33.4
Rated speed [r/min] 3000 2000 2000
Moment of inertia [10−4kg∙m2]
( ) with brake
2.8
(3.4)
5.3
(5.9)
8.2
(9.4)
15.7
(16.9)
15.7
(16.9)
23.2
(24.4)
30.7
(31.9)
50.2
(56.5)
73
(79.2)
96.4
(102.6)
145.6
(151.8)
Thermal class B
Degree of protection IP65
Recommended load to
motor inertia ratio 10 times maximum 5 times maximum 5 times maximum
Type of construction IM B5, IM V1 and IM V3
Standards CE
Operating temperature 0~40 °C (without any restrictions)
Operating humidity 90% RH maximum (non condensing at 30°C)
Vibration severity grade
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SIMOTICS S-1FL6
Dimensions
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
MOTION CONNECT 300
Design for harsh environment
High robustness
Metal connector
IP65 protection at motor side
Operating temperature cover from -25℃ to 80℃
Max. no. of bends up to 1 million
Different variants
High quality power cable, encoder cable
and brake cable offered
Different length: 3m, 5m, 10m and 20m
Full options of connectors
Siemens offer the connectors for
customer to made the cable by
themselves
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 Communication to PLC
via common pulse train or analog interface
Pulse 100kHz
Analog Encoder
Emulation
(feedback)
S7-1200 or 3rd party PLC
Pulse Line Driver
750kHz
Pulse Line Driver
750kHz
Pulse Line Driver
750kHz
Pulse Line Driver
750kHz
SIMOTION C or 3rd party motion controller
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6
Options and accessories
Cables and connectors Memory Card
• Optionally, the V90 can be operated with
the memory card.
• Parameter transfer in case of drive
replacement
• For series commissioning of several
identical drives
Braking resistor
The SINAMICS V90 already includes an
internal breaking resistor. The optional
external braking resistor can be
connected to the V90 if shorter ramp
down times are needed to absorb excess
regenerative energy in the DC link when
the capacity of the internal braking
resistor is insufficient.
Line filter
Protect the network from interference voltages
with Siemens recommended line filter
(Category C3)
• Siemens fabricated 50pin set-point cable with terminal box (V90 to PLC)
• Siemens fabricated power cable
• Siemens fabricated encoder cable
• Siemens fabricated holding brake cable
• Connectors (assembling by customer)
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6
Options and accessories
Motor options: encoder, shaft, break Replacement fan
• For SINAMICS V90 with
framesizes FSB, FSC • Incremental encoder TTL 2500ppr
• Absolute encoder 20bits, 12bits multi-turn
• Plan shaft end, with/ without holding break
• Half key balanced , with/ without holding brake
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Product
Product
Overview Description of the Product
For which Applications
Highlights (Top 5)
Technical Data / Functionality
Communication
Options
Tools
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V-ASSISTANT
The engineering tool for SINAMICS V90 drives
Commissioning and diagnostics
• Intuitive and easy-to-use graphical interface to adapt
the drive functions to the application.
• No installation, executable file with about 80MB
• Most simple approach with point-to-point
communication only, no project structure, only single
data files
• Online and offline parameterization, trace functionality,
Control Panel
• Convenient data handing for mass production and
archive for machine variants
• Advanced diagnostic and troubleshooting tool for end
customer, OEM, distributor engineers and Siemens
service engineers
http://www.siemens.com/sinamics-v90
Note: SINAMICS V-Drives are not integrated into the TIA-
Portal
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 47
• Applications 39
• Customer benefits 31
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6
customer benefits
Robustness
Opitmiced Performance
Easy to integrate
Easy to use and maintain
Safety
Integrated
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Customer benefits in detail...
Easy to use and maintain
Customer benefits Easy to use and maintain
V90: Parameter settings can be easily transferred from
one unit to another using SD-card
Less technical support required, Shorten
commissioning time for mass production
S-1FL6: Rotatable connector Free choice for customer cable outlet direction
V90 PC-tool: Graphic mask guide to set application-
specific parameters; Intuitive drive and motor status
check; Trace and measuring; Less than 50M footprint Faster setup and easy to use
V90: Pluggable connector and error proof design. All
connectors/interfaces are put in front of drive Fast commissioning, easy to operate
S-1FL6: Quick release of cable Save mounting time
S-1FL6: Real absolute encoder (without battery) Easy maintenance
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Customer benefits in detail...
Optimiced Performance
Customer benefits Optimized performance
V90: Advanced Real-time auto tuning (Optimize control
loop parameters like gains and integral time
automatically )
Enable the machine to achieve a high dynamic
performance and smooth operation in wide range of
application.
V90: Simple built-in point-to-point positioning (8 internal
fixed position set-point)
External positioning controller is not required for simple
positioning, save system cost (e.g for the PLC)
V90: 1MHz pulse train set-point and 20bits encoder
resolution feedback
Make the machine to reach high positioning accuracy
and low speed ripple.
V90: Resonance Suppression, advanced filter adaption
Suppress machine resonance frequency (result by
coupling, ball screw) automatically without measuring
the machine frequency characteristics.
This ensure dynamic response without rising machine
vibration.
Optimized system performance: 3 times overload
capacity of drive and motor, low motor torque ripple,
perfecttly fitting drive and motor
Fast acceleration/deceleration and smoothly runing
system to ensure a high machine productivity
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Customer benefits in detail...
Easy to integrate
Customer benefits Easy to integrate
V90: Simple connection to controller. 2 pulse train input
channel, one for 24V level and another exclusively for
high speed differential 5V RS485 level
Standard interface make drive easy to integrate with
PLCs and motion controller.
V90: Provide wide range of motion solutions together
with S7-PLCs and panels
One stock solution to customer to reduce supplier effort
and manpower
V90: Position/speed/torque/internal positioning/control
change mode available Suitable for various control structure
V90: Compact drive size Save cabinet space
V90: Built-in braking resistor for all drive version
Save cabinet space, fast ramp down performance
without external braking module (to dissipate the
regenerative power) necessary for all frame size
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Customer benefits in detail...
Robustness
Customer benefits Robustness
V90: Wider voltage range Reliable operation for line voltages: –3AC 380 V … 480
V (-15 % , +10 %)
V90: Better cooling design and coated PCB Operation up to an ambient temperature of 55 °C
S-1FL6: Robust mechanical design including housing
(Quality-brand bearing, Full metal housing connectors) High tolerance against bad environmental conditions
S-1FL6: Real IP65 degrees of protection (IP65 include
connector) Increase environmental resistance
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Detailed overview about the customer benefits...
Safety Integrated
Benefits for the customer Safety Integrated
Integrated safety function STO (Safe
Torque Off):
Built-in Safe torque off function via
terminals, in accordance with standard
IEC SIL 2. The STO function prevents
energy from being supplied to the motor,
which can generate a torque.
An unwanted start of the motor will be
prevented.
The certified safety functions help to
ensure to realize a practicable protection
of personnel and machinery
Less system costs because of less
additional devices needed
Higher degree of productivity because of
less downtime of the machines
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 47
• Applications 38
• Customer benefits 32
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Applications
Applications
• Feed film and cross cutting
• Soap Cutting Machine
• Spining Machine
• Battery Machine
• Amorphous Steel Coiling Machine
• Servo straightener feeder Machine
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Application horizontal packaging
Feed film and cross cutting
Application Solution
Horizotal packaging V90 + 1FL6
Requirement Customer benefit
• One motor to control the feed of film
• One motor to control the cutting knife, this axis
need to be synchronized with feed film axis to
guarantee the distance of film.
• Preconfigured position control with pulse train, only
mechanical parameters need to be adjust
• Auto-tuning function enable the increasing of fast ramp up
and ramp down to increase productivity.
• Simple solution together with AS S7-PLCs, total solution
reduce integration effort.
Feed film Cross Cutting
△L △L
Feed film Cross Cutting
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
PTI Position Control
Soap Cutting Machine
Application Solution
The soap cutting machine will cut the soap bar made
by the machine before into pieces of soap with curtain
length and weight.
Requirement Customer benefit
• The asynchronous motor drives the conveyor belt
to transfer the soap bar, a encoder is used to detect
the soap bar speed and give the feedback to PLC.
The servo motor drives the cutter by a gear box to
cut the soap bar at the right speed and position.
• All position switches are connected to the PLC. The
PLC coordinate all actions
• Save a transformer in the application.
• Efficiency is 20% higher than the customer‟s requirement.
• The accuracy reaches ± 0.5g.
V90
2kW
V20
0.75kW
Cutter
Conveyor
SMART
HMI 7‟
USS
Mechanical cam
1FL6 R-Gear
Encoder
S7-200
SMART
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
PTI Position Control
Spining Machine
Application Solution
Spining machine, which is also called edge rolling
machine, is mainly used to machine the dished head
of oil tank, cement tank, pressure vessel etc.
Requirement Customer benefit
• This machine controls two servo motors via one
PLC. One motor drives the spinning axis and
another motor drives the swing axis. The workpiece
is machined continuously by the coordinated
movement of the two axes.
• User can operate the machine by the buttons and
switches on the operation panel
• 1.Connect with 3rd party PLC simply.
• 2.Reduce the cost of transformer for customers.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
PTI Position Control
Battery Machine
Application Solution
The Battery machine, is mainly used to produce the
membrane. This machine will press two membrane to
one.
Requirement Customer benefit
• This machine controls two servo motor via one
PLC. PLC control the pulse frequency to control the
motor speed according to the angle sensor. Angle
is big, then rotating speed is big. The speed of the
combination point of the two axis should be the
same.
• User can operate the machine by the buttons and
switches on the operation panel and HMI.
• 1.Connect with 3rd party PLC simply.
• 2.Reduce the cost of transformer for customers.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
PTI Position Control
Amorphous Steel Coiling Machine
Application Solution
Amorphous steel coiling machine, is mainly used to
produce the iron core of the motor, inductance and so
on, with the rough material is amorphous steel.
Requirement Customer benefit
• This machine controls one servo motor via one
PLC. The motor drive the rotating axis to rotate and
stop at the exact degree. User can set the rotating
speed and stop degree through the HMI.
• User can operate the machine by the buttons and
switches on the operation panel and HMI
• 1.Connect with 3rd party PLC simply.
• 2.Reduce the cost of transformer for customers.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
PTI Position Control
Servo straightener feeder Machine
Application Solution
This machine is designed to straighten the most
delicate, highly polished and fine materials.
Requirement Customer benefit
• This machine controls one servo motor via one
PLC. The motor drive the rotating axis to rotate and
stop at the exact degree.
• User can operate the machine by the buttons.
• Reduce the cost of transformer for customers.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 46
• Applications 39
• Customer benefits 32
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Added Value Topics
Added Value Topics Safety Integrated
Standard applications
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Safety Integrated
Siemens is worldwide No. 1 in machine safety*
Wherever rotating units such as saws, rollers and spindles are used or handling axes and machine slides are moved linearly, there is a higher risk of injury for personnel and machine
Safety Integrated means
Certified safety functions to realize a secure shutdown and the safe
monitoring of movement and positioning are integrated direct into
the drive.
The actuation of the safety functions can be realized by the
terminals of the drive themselves.
Detailed informations for Safety Integrated
SINAMICS Safety Integrated Sales Slides:
My Presentation Manager (Intranet)
Go to the Siemens safety internet page to find more detailed
informations: www.siemens.com/safety
*( ARC Study 2012)
https://intranet.industry.siemens.com/infohub/apps/Index/IntranetIndex.aspx?mid=8201&lang=enhttp://www.siemens.com/safety
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Standardapplikationen
Standard applications comprise the following contents Benefits for the customer
Ready to run example of an application including:
Wiring diagram, guided commissioning via script file,
parameter description
Sample configuration for the connection of
SINAMICS to SIMATIC: Presentation of hardware
and software, wiring example, installation
instructions for the S7 project supplied, drive
parameterization,
HMI sample project
Getting quickly to the project in
progress
The Commissioning Guide need not
be read
Getting quickly to the rotating motor
Basis for customer-specific
configuration
Optimum use of the TIA benefits
Can be downloaded at no cost from
the Online Support Portal
SIMATIC S7-3x
SIMATIC HMI
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Standard applications, how can I quickly get to the
suitable application?
Enhanced selection of the existing applications
Intelligent “Multiset“ filter acc. to product, plant or customer-specific specifications
Situated between SINAMICS product sites and Online Support
Enhanced product assignment for application examples
Fast overview of the contents of the GMC applications
SIOS - Siemens Industry Online Support Product Page - e.g. SINAMICS G120P
Product-function Matrix
Customer
http://support.automation.siemens.com/WW/view/de/20229807/136000&cspltfrm=30&cssw=0&csbinh=8http://support.automation.siemens.com/WW/view/de/20229807/136000&cspltfrm=30&cssw=0&csbinh=8http://support.automation.siemens.com/WW/view/de/20229807/136000&cspltfrm=30&cssw=0&csbinh=8http://support.automation.siemens.com/WW/view/de/20229807/136000&cspltfrm=30&cssw=0&csbinh=8https://intranet.automation.siemens.com/mcms/standard-drives/de/niederspannungsumrichter/sinamics-g120p/Seiten/sinamics-g120p.aspxhttps://intranet.automation.siemens.com/mcms/standard-drives/de/niederspannungsumrichter/sinamics-g120p/Seiten/sinamics-g120p.aspxhttps://intranet.automation.siemens.com/mcms/standard-drives/de/niederspannungsumrichter/sinamics-g120p/Seiten/sinamics-g120p.aspxhttps://intranet.automation.siemens.com/mcms/standard-drives/de/niederspannungsumrichter/sinamics-g120p/Seiten/sinamics-g120p.aspxhttps://www.automation.siemens.com/mc-app/sinamics-application-examples/Home/Index?language=enhttps://www.automation.siemens.com/mc-app/sinamics-application-examples/Home/Index?language=enhttps://www.automation.siemens.com/mc-app/sinamics-application-examples/Home/Index?language=en
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Product-function matrix
Application filtering
Getting quickly to the appropriate application: Selection of the appropriate application according to product,
plant / system and customer-specific specifications
Selection of the
SINAMICS drive
Selection of
the function
Selection of the
S7 controller
Selection of the
configuring software
(TIA Portal)
Selection of the
communication
(DB, PN,…)
Safety, DCC,
FFB,….
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation 55
• Marketing Promotion 52
• Added Value Topics 47
• Applications 39
• Customer benefits 32
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6
Catalogs, product brochures, Internet presentation
Promotion Catalog
Promotion catalog stating
the highlights and technical
data of SINAMICS V90 &
SIMOTICS S-1FL6
Internet presentation
Major facts regarding
SINAMICS V90 & SIMOTICS
S-1FL6, links to the
documentation and
brochures, as well as
technical data and support
for the user are provided on
the Internet. http://www.siemens.com/sinamics-v90
Video
Video about the wiring,
commissioning, diagnosis
and use of the SINAMICS
V90 & SIMOTICS S-1FL6
Servosystem
http://www.siemens.com/sinamics-v90http://www.siemens.com/sinamics-v90http://www.siemens.com/sinamics-v90
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 61
• Service/Support/Documentation
54
• Marketing Promotion 53
• Added Value Topics 47
• Applications 39
• Customer benefits 32
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Chapter Overview
Service / Support / Documentation
Service / Support /
Documentation
• Service and Support
• User Documentation
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Service and Support – The Siemens Network:
Close to the customer and worldwide
Online Support
... Always the first step
Technical Consulting
... Competent answers to all your questions
Technical Support
... We optimize planning and concept execution.
Engineering incl. Software Engineering
… The top competence of our employees ensures
utmost quality when commissioning your plant / system.
Field Service
... Our specialists are always in your vicinity.
Repair and Spare Parts
... Our comprehensive repair and spare parts service
offers the highest degree of operational safety
Improvement and retrofit
... We thus secure your machines and your plant invest
in the long run.
Worldwide, 24 h/365 days available
Online-Support
Technischer Support
Technical Consulting
Engineering incl. Software Engineering
Field Service
Repair and Spare Parts
Improvement and Retrofit
Planning &
Design
Engineering &
Developement
Installation &
Commissioning
Operation &
Service
Retrofit
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Service and Support – The Siemens Network:
Close to the customer and worldwide
Experts answer technical inquiries fast and competently.
+49 911 895 7222 for Germany
+1 423 262 2960 for America
+86 10 6475 7575 for Asia/Pacific
regional contact persons see below
Optimal system solutions with automation components from Siemens
The fast, competent solution
You can directly access current expert knowledge in numerous languages on the Internet. http://www.siemens.com/automation/service&support
Online
Support
Technical
Support
Technical
Consulting *)
Engineering
incl. Software
Engineering *)
*) Specific region-specific matters are handled by our contact persons, Contact Partner Database:
http://www.automation.siemens.com/partner/index.asp?regid=ww&lang=en&comptcid=v
http://www.siemens.com/automation/service&supporthttp://www.automation.siemens.com/partner/index.asp?regid=ww&lang=en&comptcid=v
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Service and Support – The Siemens Network:
Close to the customer and worldwide
By storekeeping spare parts and worldwide logistics, we can ensure fast delivery.
We repair fast, reliably and with high quality
+49 (0)180 5050 448 for Germany
regional contact persons see below
Through improvement and retrofit measures, we offer an alternative to new investments.
Our specialists are always in your vicinity – they quickly get on site –worldwide
+49 (0)180 5050 444 for Germany,
regional contact persons see below
Field Service
Spare Parts*)
Repairs*)
Improvement
and Retrofit*)
*) Specific region-specific matters are handled by our contact persons, Contact Partner Database:
http://www.automation.siemens.com/partner/index.asp?regid=ww&lang=en&comptcid=v
http://www.automation.siemens.com/partner/index.asp?regid=ww&lang=en&comptcid=v
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
SINAMICS V90 & SIMOTICS S-1FL6
User Documentation
User Documentation
• Entry to the V90 & S-1FL6 product support
site https://support.automation.siemens.com/
• Operating Instructions
• Getting Startet
https://support.automation.siemens.com/https://support.automation.siemens.com/
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
• Logistic 60
• Service/Support/Documentation 55
• Marketing Promotion 53
• Added Value Topics 47
• Applications 39
• Customer benefits 32
• Product 9
• Introduction 3
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Logistik
For more detailed information about logistics
and delivery times, please contact your local
Siemens contact person.
-
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Thank you for your attention!
Axel Haendler
DoubleGMC! Project
I IA DT MC RMC P
E-Mail: [email protected]
siemens.com/answers