sim test dynamics llp v1.1
TRANSCRIPT
Company Information
SimTest Dynamics LLP:
Line of Business : Test Rig / Test Bench Design, Development &
Supply , Data Acquisition(RLDA), Test
Analysis, Simulation & Automation
Director : R. Srinivasan, P.K.Paul, Ambuj Sharma
Works/Operation : A 5 E, Sector 80, Noida Phase 2, Gautam
Budh Nagar (UP)
INDIA - 201301
Registered Office : 36-B, Pocket-B SFS Flats New Kondli, Mayur
Vihar Phase-3
Delhi 110 096. INDIA
Website: http://www.simtestdynamics.in
MSME No.: 090102209117
http://www.simtestdynamics.in
Company InformationVision
MissionOur Vision
TO be able to bring Technology
Breakthrough in areas of Test &
Measurement , Simulation and
Physical Development of Test
system with High end software
for Real Time control application
with latest tools and Techniques.
Our Mission
TO be recognized as preferred partner in their product development &
evaluation processes by consistently meeting & exceeding expectations with
respect to Time, Cost & Technology.
Accurate
Versatile
Reliable
http://www.simtestdynamics.in
Company Information
Partners / Associates / Alliance
Alliance member
www.india.ni.com
Partner for
“ Analysis & Simulation”
www.hinode.in
MOU for “Test & Measurement”
www.icat.in
http://www.simtestdynamics.in
Our Products
SimTest Dynamics LLP
Provides
both services and own Products
http://www.simtestdynamics.in
Our Services
Consultancy on setting up/ upgrading
test facilities
Design, supply of customized Test Rigs.
Testing, Measurement & Data Analysis
( we have sensors, data loggers etc. )
Process Automation (Developed 3 axis
robot for pick & place)
Ruggidisation as per MIL standard
Control S/w using Lab View & Vx Works
Fusion sensor (MEMS based) – GPS,
Accelerometer, IMU
Gear shift sensor
Clutch / brake pedal sensor
Steering wheel sensor etc.
Chase Machine – for measurement of friction
for friction material
Pressure Pulsating Rig – Brake hose testing
Water Spray – Automotive Lamp testing
Scale Test Rig – Friction Material
Compressibility Test Rig – Friction Material
Hydraulic Actuator
Transmission Test Rig
Products
Test Rig
Custom Build Sensor
Software
T
C
S
http://www.simtestdynamics.in
Coefficient of friction measuring
machine (Chase Machine)
http://www.simtestdynamics.in
Dynamic Motion Measurements V1.1
Services Over View
Engineering
Services
TEST SETUP / TEST BENCH / TEST RIG DESIGN & DEVELOPMENT
TEST & MEASUREMENT
SIMULATION & AUTOMATION
http://www.simtestdynamics.in
Services Over View
Engineering
Services
http://www.simtestdynamics.in
TEST SETUP / TEST BENCH
/ TEST RIG
DESIGN & DEVELOPMENT
Concept Design
3D Modeling
Design
Cal.
Manuf.
Drawing
Bill of
Material
BOP Sourcing
Machining
Fabrication
Assembly
Test
&
Trials
Installation
Services Over View
TEST
&
MEASUREMENT
RLDA
Strain
Disp. / Velocity/
Acceleration.
Noise
Motion Tracking
High Speed Video
Wireless
/
Remote
Fatigue Life
Controller
Development
Customized
Sensor
Software
Development
Engineering
Services
http://www.simtestdynamics.in
Services Over View
SIMULATION
&
AUTOMATION
Control S/w Development
Vision Based System
Missing Part Detection
Defective Part
Detection
Part Position Verification
Engineering
Services
http://www.simtestdynamics.in
Test Setup Design & Development
Case
Study
http://www.simtestdynamics.in
Gear Test Rig System
Pressure Pulsation System
Water Sprinkler Test Bench
PCU Rework Station
G
P
W
E
Test Setup Design & Development
System Specification for the given test Sample range
Layout Drawing
Concept Design for Setup
3D Model
Manufacturing Drawings
BOM
BOP - Sourcing
Machining
Fabrication
Assembly
Test & trials
Installation & Commissioning
Warranty
Technical Manual
Objective :
CASE Study
To develop a Gear Test Rig System.
Scope of Work:
http://www.simtestdynamics.in
Test Setup Design & Development
System Specification for the given test Sample range
Layout Drawing
Concept Design for Setup
3D Model
Manufacturing Drawings
BOM
BOP - Sourcing
Machining
Fabrication
Assembly
Test & trials
Installation & Commissioning
Warranty
Technical Manual
Objective :
CASE Study
To develop a Pressure Pulsation System as per
TST/TS/WI Reference standard
Scope of Work:
http://www.simtestdynamics.in
Test Setup Design & Development
System Specification for the given test Sample range
Layout Drawing
Concept Design for Setup
3D Model
Manufacturing Drawings
BOM
BOP - Sourcing
Machining
Fabrication
Assembly
Test & trials
Installation & Commissioning
Warranty
Technical Manual
Objective :
CASE Study
To develop a Water Spray & Water Sprinkler Test
bench as per JIS D0203 Reference Standard.
Scope of Work:
http://www.simtestdynamics.in
Test Setup Design & Development
System Specification for the given test Sample range
Layout Drawing
Concept Design for Setup
3D Model
Manufacturing Drawings
BOM
BOP - Sourcing
Machining
Fabrication
Assembly
Test & trials
Installation & Commissioning
Warranty
Technical Manual
Objective :
CASE Study
To develop a ECU Assembly Rework Station.
Scope of Work:
Test & Measurement
To Plot The Trajectory Motion of The Payload Leaving Out From Cargo Bay of the Cargo Aircraft at Designed Height and Speed
To Measure The Stresses in Half Shaft in Unladen, Rated GVM, Over Loaded Vehicle
To Measure The Bending in Suspension in Unladen, Rated GVM, Over Loaded Vehicle
To Measure The Load on Suspension in Unladen, Rated GVM, Over Loaded Vehicle
To Measure The Stress and Failure in Gear Box Housing
To develop a NI Based Controller for the Aerostat Operational Control
To Measure The Stresses in Chassis of Vehicle
http://www.simtestdynamics.in
Case
Study
Test & Measurement
Load Cell, Strain Gauging ,Data logger
Accelerometer , GPS, IMUSensor
Camera
Objective :
CASE Study
To plot the trajectory motion of the payload leaving
out from cargo bay of the cargo aircraft at designed
height and speed
Measurement:
Data Analysis:
The raw data was analyzed to repot results like trajectory, drop velocity, impact forces etc.
http://www.simtestdynamics.in
Test & Measurement
GPS , Telemetry
Strain Gauging , Data logger
Camera
Objective :
CASE Study
To Measure the stress in half shaft in unladen ,
rated gvw , overloaded vehicle
Measurement:
Data Analysis:
The raw data was analyzed to repot results like stresses, failure etc.
http://www.simtestdynamics.in
Test & Measurement
GPS ,Data logger , LVDT
Strain Gauging
Camera
Objective :
CASE Study
To Measure the bending in suspension in unladen ,
rated gvw , overloaded vehicle
Measurement:
Data Analysis:
The raw data was analyzed to repot results like bending ,displacement in damper.
http://www.simtestdynamics.in
Test & Measurement
GPS , Data logger , LVDT
Strain Gauging
Camera
Objective :
CASE Study
To Measure the Load on suspension in Unladen ,
rated gvw , overloaded vehicle
Measurement:
Data Analysis:
The raw data was analyzed to repot results like maximum load on suspension (spring/damper) and suspension failure.
http://www.simtestdynamics.in
Test & Measurement
Data logger
Strain Gauging,GPS
Camera
Objective :
CASE Study
To measure the stress and failure in gear box housing.
Measurement:
Data Analysis:
The raw data was analyzed to repot results like stresses, failure etc.
http://www.simtestdynamics.in
Test & Measurement
Data logger , LVDT , GPS
Accelerometer , Strain Gauging , Encoder
Camera
Objective :
CASE Study
To measure the stress in vehicle chassis , wheel rpm,
suspension behavior , vibrations in axle in dynamic
condition.
Measurement:
Data Analysis:
The raw data was analyzed to repot results like stresses , vibration , rpm , displacement , failure etc.
http://www.simtestdynamics.in
Test & Measurement
Data Logger
Strain Gauging
Objective :
CASE Study
To Measure the stresses in PCB during Component
Assembly
Measurement:
Data Analysis:
The raw data was analyzed to repot results like stresses, failure etc.
http://www.simtestdynamics.in
Simulation & Automation
Industrial Automation
Automotive
Equipment manufacturing
Process industry
I
A
E
P
http://www.simtestdynamics.in
Case
Study
Simulation & Automation
Hardware Selection – NI Cards etc.
Control of Actuator , Hydraulic Valves, Power Pack.
Control of Winch , Stow Drum , Pneumatic System.
Control of Load Cell and Camera etc.
Operator Console Design and Development.
Logic and Software Development.
Wired and Remote System Development.
Objective :
CASE Study
To develop a NI based controller for the Aerostat operational control.
Scope of Work:
http://www.simtestdynamics.in
Simulation & Automation
Design
Development – Mechanical , Sensor , Control.
Software Development
Proving out on the assembly line
Objective :
CASE Study
To develop a Poka - Yoka system for bearing fitment and inspection during assembly process.
Scope of Work:
http://www.simtestdynamics.in
http://www.simtestdynamics.in
YouThank
Contact
Ambuj SharmaDirector
P K PaulDirector
R SrinivasanDirector
Email : [email protected]
Mobile : +91-98-1131-8706
Skype : ambujs
Email : [email protected]
Mobile : +91-98-1100-8014
Skype : pk2305
Email : [email protected]
Mobile : +91-98-4104-4084
Skype : sriniit
SimTest Dynamics LLP
A 5 E, Sector 80, Noida Phase 2
Gautam Budh Nagar (UP) – 201301
INDIA
Accurate Versatile and Reliable
www.simtestdynamics.in
http://www.simtestdynamics.in