sika car park capabilities sika solutions from … / s6 s2 / s5 s1 / s4 parking structures are of...

6
ECONOMIC AND DURABLE WATERPROOFING PROTECTION REFURBISHMENT SIKA SOLUTIONS FOR PARKING DECKS

Upload: lamduong

Post on 17-May-2018

216 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

Sika Car Park CaPabilitieS

ANCHORINGSika AnchorFix®

Sikadur®

SikaGrout®

CORROSION MITIGATION

Sika® Galvashield®

Sika® FerroGard®

Sika® Ebonex®

STEEL PRIMERS & BONDING AGENTSSikaTop® Armatec

Sikadur®

Sikagard®

SHALOW DEPTH REPAIR AND LEVELLING MORTARSSikaTop®

Sika® MonoTop®

SikaQuick®

Sikafloor®

Sika® Pronto®

Sikafloor® Level

PREBAGGED CONCRETE AND

DEEP/FULL DEPTH REPAIRS

Sikacrete®

Sika® Viscocrete®

CRACK INJECTION RESINSSikadur®

SikaFix®

MOISTURE MITIGATION SYSTEMS

Sikagard® EpoCemCA

Sikafloor® EpoCemCA

Sika® Primer

WATERPROOFINGSikaProof®

Sika® Greenstreak®

Sikalastic®

Sikalastic® Duodeck

SikaSwell®

Sikagard®

STRUCTURAL STRENGTHENING

Sika® CarboDur®

Sika® CarboShear

SikaWrap®

EXPANSION AND CONTROL JOINTSSikaflex®

Sikasil®

Sika® Duoflex®

Sikadur® Combiflex®

When it comes to construction, maintenance and refurbishment of parking structures, Sika can help you at virtually every stage of the process with a fully integrated and warranteed range of systems. These include: concrete admixtures, corrosion inhibitors, galvanic anodes and other forms of corrosion management; full-depth, patch or shallow repair mortars; anchoring adhesives and injection resins; joint sealants; penetrating sealers and protective/decorative coatings; right through to line marking materials for the deck membranes themselves. Sika has your car park covered!

The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelf life. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Product Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed in the Internet under www.sika.ca.

Sika Canada inC.Head Office601, avenue DelmarPointe-Claire, Quebec H9R 4A9

Other locationsTorontoEdmontonVancouver

An ISO 9001 certified companyPointe-Claire: ISO 14001 certified EMS

© S

ika

Cana

da In

c./S

ika

Solu

tion

s fo

r Par

king

Dec

ks/1

1.201

3/ar

SIKA SOLUTIONS FROM ROOF TO FOUNDATIONS

Also Available:

Joint Sealing

Sikaflex®Sikasil® Sikadur® Combiflex

Grouting and anchoring

SikaGrout®Sikadur®Sika anchorFix®

roofing Systems

Sarnafil®Sikaplan®Sikalastic®

Concrete Production

Sika® ViscoCrete®Sika® retarder® Sika® aerCa

Waterproofing Systems

SikaProof®, SikaFuko®Sika® Greenstreak®SikaSwell®, SikaFix®

Floor & Wall Systems

Sikafloor® Sikagard® Sikagard® duroplast

Concrete repair & Protection

Sika® Monotop®Sikatop®, Sikarepair® Sikagard®

Structural Strengthening

Sikadur®, Sika® Carbodur®SikaWrap®Sika® CarboShear

Sika Canada Inc., a member of the Sika Group, is a leader in the field of speciality chemicals, for construction and manufacturing industries. Our product lines feature high quality roofing systems, concrete admixtures, mortars and resins, sealants and adhesives, structural strengthening components, industrial and decorative flooring, as well as protective coatings and waterproofing systems. Our expertise is borne out of a global presence and served by strong, local support. Sika has earned the trust of our industries for over 100 years, by delivering the highest standards of commitment and partnership.

ECONOMIC AND DURABLE WATERPROOFING PROTECTION

REFURBISHMENTSIKA SOLUTIONS FOR PARKING DECKS

PROTECTIVE SEALERS

Sikagard®

Sikafloor®

Sika® Florseal

Sikalastic® Duocel

PROTECTIVE AND DECORATIVE COATINGSSikagard®

Sikagard® Duroplast

1-800-933-Sikaw w w . s i k a . c a

Page 2: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

S3 / S6

S2 / S5

S1 / S4

Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only serve to provide a valuable facility for public and private concerns, but are often a source of revenue for owners and operators.

From an asset management perspective, it is crucial then that, during construction, maintenance or renovation, these structures are properly waterproofed and protected. This will directly and positively impact upon achieving the optimum service life and maximizing the value of investment.

Sika’s history has, at its core, a century of expertise in controlling the passage of water and the protection of concrete. This experience makes the global group a world leader in the field of integral and surface-applied waterproofing technologies, including Sikalastic® systems for trafficked decks.

Sika’s project-oriented approach, combined with high quality, proven systems has resulted in the best-suited, most durable and cost-effective solutions successfully protecting new or existing parking structures around the world, including here in Canada.

Sikalastic® & Sikalastic® Duodeck PARKING DECK SYSTEMS

Sikalastic® Parking Deck Systems Single component, fully bonded and seamless elastomeric polyurethane systems. Easily applied, repaired and renewed, with options for exterior top coats to provide improved wear and UV resistance, with custom colours.

Sikalastic® Duodeck Parking Deck Systems Two-component, fast cure, low odour and VOC compliant polyurethane systems. Unique option for LEED aligned system incorporating renewable resources and recycled content. Manufactured in Canada, specifically for Canadian conditions.

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Grey Charcoal Tan

Wear Course Colours* Custom colours for exposed areas available on request

FeatureS beneFitS

Zero VOC Content and odourless Non toxic and protective of health

Rapidly renewable and recycled raw materials (SA Grades) Contributor to LEED® Canada ratings

Conforms to standard CSA S413-07 Selection underwritten by 3rd party

Class A fire rating to CAN/ULC S102.2 Health and safety catered for

Low temperature crack bridging Continued protection across ~1.5 mm (1/16 in) wide crack at -26°C (15°F)

Potential for self--priming 2 coat system Easy to install /increased productivity

Resistance to chemicals and solutions Barrier to road salts and auto fluids

Similar friction properties to asphalt Excellent anti-skid qualities

Seamless waterproofing and protection Prolonged service life of structures

Two-component, hybrid wearing courses Excellent abrasion and wear resistance

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

MembraneSikalastic® 715 Wear Course i

Sikalastic® 715 Wear Course ii

Parking stalls and pedestrian areas S1 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S2 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S3 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

eXPOSed areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

Membrane

Sikalastic® 735 al or 736 al lo-VOC

Wear Course i

Sikalastic® 735 al or 736 al lo-VOC

Wear Course ii

Parking stalls and pedestrian areas S4 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S5 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S6 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

• Sika® MT Primer must be used with this system, standardly applied as one coat at 8 – 10 mils, including for concrete moisture contents of up to 6%. • Sikalastic® Duochem 8200 may be used as required for ramps and ticket booths. Contact your Sika Canada Representative for advice. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

RAL 7015 Slate Grey

RAL 9017 Traffic Black

RAL 7046 Telegrey 2

RAL 7012 Basalt Grey

Wear Course Colours* Custom colours available on request

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 391Wear Course i

Sikalastic® duochem 391

Wear Course iiParking areas and pedestrian walkways SD1 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD2 8 - 10 mils 20 - 25 mils 25 mils - Driving lanes with ramps, turns and entrances SD3 8 - 10 mils 20 - 25 mils 18 mils 18 mils

eXPOSed areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 394Wear Course i

Sikalastic® duochem 394Wear Course ii

Parking areas and pedestrian walkways SD4 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD5 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD6 8 - 10 mils 20 - 25 mils 18 mils 18 mils

HeaVy duty

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 8200Wear Course i

Sikalastic® duochem 8200Wear Course ii

Parking areas and pedestrian walkways SD7 8 - 10 mils 20 - 25 mils 18 mils -Driving lanes SD8 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD9 8 - 10 mils 20 - 25 mils 18 mils 18 mils

(1) Sika® MT Primer is provided as an option to increase adhesion in certain conditions and is recommended when moisture is present in the concrete. For standard applications or concrete moisture content of up to 6%, apply one coat at 8 - 10 mils. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

SySteM build-uPS

Raw materials derived from rapidly renewable resources.

Recycled rubber synthetic aggregates (SA grades).

FeatureS beneFitS

Single component systems Ease of application with unlimited pot life restrictions

Seamless and fully bondedEliminates lateral water migration undermining durability

Elastomeric across temperature range

Excellent crack bridging even at low temperatures

Abrasion and chemical resistantHandles vehicle traffic and fluids as well as de-icing salts

Embedded aggregateIncreased mechanical properties and slip resistance

Surface applied and maintainable

Easily repaired and sustained

Options for wear courses in exposed areas

Enhanced wear and UV resistance, with broader colour choice

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Sd 3 / Sd 6 / Sd 9

Sd 1 / Sd 4 / Sd 7

SySteM build-uP

391 / 394 / 8200 Wear Course II

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Sd 2 / Sd 5/ Sd 8

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Page 3: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

S3 / S6

S2 / S5

S1 / S4

Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only serve to provide a valuable facility for public and private concerns, but are often a source of revenue for owners and operators.

From an asset management perspective, it is crucial then that, during construction, maintenance or renovation, these structures are properly waterproofed and protected. This will directly and positively impact upon achieving the optimum service life and maximizing the value of investment.

Sika’s history has, at its core, a century of expertise in controlling the passage of water and the protection of concrete. This experience makes the global group a world leader in the field of integral and surface-applied waterproofing technologies, including Sikalastic® systems for trafficked decks.

Sika’s project-oriented approach, combined with high quality, proven systems has resulted in the best-suited, most durable and cost-effective solutions successfully protecting new or existing parking structures around the world, including here in Canada.

Sikalastic® & Sikalastic® Duodeck PARKING DECK SYSTEMS

Sikalastic® Parking Deck Systems Single component, fully bonded and seamless elastomeric polyurethane systems. Easily applied, repaired and renewed, with options for exterior top coats to provide improved wear and UV resistance, with custom colours.

Sikalastic® Duodeck Parking Deck Systems Two-component, fast cure, low odour and VOC compliant polyurethane systems. Unique option for LEED aligned system incorporating renewable resources and recycled content. Manufactured in Canada, specifically for Canadian conditions.

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Grey Charcoal Tan

Wear Course Colours* Custom colours for exposed areas available on request

FeatureS beneFitS

Zero VOC Content and odourless Non toxic and protective of health

Rapidly renewable and recycled raw materials (SA Grades) Contributor to LEED® Canada ratings

Conforms to standard CSA S413-07 Selection underwritten by 3rd party

Class A fire rating to CAN/ULC S102.2 Health and safety catered for

Low temperature crack bridging Continued protection across ~1.5 mm (1/16 in) wide crack at -26°C (15°F)

Potential for self--priming 2 coat system Easy to install /increased productivity

Resistance to chemicals and solutions Barrier to road salts and auto fluids

Similar friction properties to asphalt Excellent anti-skid qualities

Seamless waterproofing and protection Prolonged service life of structures

Two-component, hybrid wearing courses Excellent abrasion and wear resistance

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

MembraneSikalastic® 715 Wear Course i

Sikalastic® 715 Wear Course ii

Parking stalls and pedestrian areas S1 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S2 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S3 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

eXPOSed areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

Membrane

Sikalastic® 735 al or 736 al lo-VOC

Wear Course i

Sikalastic® 735 al or 736 al lo-VOC

Wear Course ii

Parking stalls and pedestrian areas S4 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S5 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S6 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

• Sika® MT Primer must be used with this system, standardly applied as one coat at 8 – 10 mils, including for concrete moisture contents of up to 6%. • Sikalastic® Duochem 8200 may be used as required for ramps and ticket booths. Contact your Sika Canada Representative for advice. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

RAL 7015 Slate Grey

RAL 9017 Traffic Black

RAL 7046 Telegrey 2

RAL 7012 Basalt Grey

Wear Course Colours* Custom colours available on request

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 391Wear Course i

Sikalastic® duochem 391

Wear Course iiParking areas and pedestrian walkways SD1 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD2 8 - 10 mils 20 - 25 mils 25 mils - Driving lanes with ramps, turns and entrances SD3 8 - 10 mils 20 - 25 mils 18 mils 18 mils

eXPOSed areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 394Wear Course i

Sikalastic® duochem 394Wear Course ii

Parking areas and pedestrian walkways SD4 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD5 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD6 8 - 10 mils 20 - 25 mils 18 mils 18 mils

HeaVy duty

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 8200Wear Course i

Sikalastic® duochem 8200Wear Course ii

Parking areas and pedestrian walkways SD7 8 - 10 mils 20 - 25 mils 18 mils -Driving lanes SD8 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD9 8 - 10 mils 20 - 25 mils 18 mils 18 mils

(1) Sika® MT Primer is provided as an option to increase adhesion in certain conditions and is recommended when moisture is present in the concrete. For standard applications or concrete moisture content of up to 6%, apply one coat at 8 - 10 mils. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

SySteM build-uPS

Raw materials derived from rapidly renewable resources.

Recycled rubber synthetic aggregates (SA grades).

FeatureS beneFitS

Single component systems Ease of application with unlimited pot life restrictions

Seamless and fully bondedEliminates lateral water migration undermining durability

Elastomeric across temperature range

Excellent crack bridging even at low temperatures

Abrasion and chemical resistantHandles vehicle traffic and fluids as well as de-icing salts

Embedded aggregateIncreased mechanical properties and slip resistance

Surface applied and maintainable

Easily repaired and sustained

Options for wear courses in exposed areas

Enhanced wear and UV resistance, with broader colour choice

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Sd 3 / Sd 6 / Sd 9

Sd 1 / Sd 4 / Sd 7

SySteM build-uP

391 / 394 / 8200 Wear Course II

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Sd 2 / Sd 5/ Sd 8

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Page 4: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

S3 / S6

S2 / S5

S1 / S4

Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only serve to provide a valuable facility for public and private concerns, but are often a source of revenue for owners and operators.

From an asset management perspective, it is crucial then that, during construction, maintenance or renovation, these structures are properly waterproofed and protected. This will directly and positively impact upon achieving the optimum service life and maximizing the value of investment.

Sika’s history has, at its core, a century of expertise in controlling the passage of water and the protection of concrete. This experience makes the global group a world leader in the field of integral and surface-applied waterproofing technologies, including Sikalastic® systems for trafficked decks.

Sika’s project-oriented approach, combined with high quality, proven systems has resulted in the best-suited, most durable and cost-effective solutions successfully protecting new or existing parking structures around the world, including here in Canada.

Sikalastic® & Sikalastic® Duodeck PARKING DECK SYSTEMS

Sikalastic® Parking Deck Systems Single component, fully bonded and seamless elastomeric polyurethane systems. Easily applied, repaired and renewed, with options for exterior top coats to provide improved wear and UV resistance, with custom colours.

Sikalastic® Duodeck Parking Deck Systems Two-component, fast cure, low odour and VOC compliant polyurethane systems. Unique option for LEED aligned system incorporating renewable resources and recycled content. Manufactured in Canada, specifically for Canadian conditions.

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Grey Charcoal Tan

Wear Course Colours* Custom colours for exposed areas available on request

FeatureS beneFitS

Zero VOC Content and odourless Non toxic and protective of health

Rapidly renewable and recycled raw materials (SA Grades) Contributor to LEED® Canada ratings

Conforms to standard CSA S413-07 Selection underwritten by 3rd party

Class A fire rating to CAN/ULC S102.2 Health and safety catered for

Low temperature crack bridging Continued protection across ~1.5 mm (1/16 in) wide crack at -26°C (15°F)

Potential for self--priming 2 coat system Easy to install /increased productivity

Resistance to chemicals and solutions Barrier to road salts and auto fluids

Similar friction properties to asphalt Excellent anti-skid qualities

Seamless waterproofing and protection Prolonged service life of structures

Two-component, hybrid wearing courses Excellent abrasion and wear resistance

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

715 / 735 AL / 736 AL Lo-VOC Wear Course II

715 / 735 AL / 736 AL Lo-VOC Wear Course I

710 Membrane

Sika® MT Primer

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

MembraneSikalastic® 715 Wear Course i

Sikalastic® 715 Wear Course ii

Parking stalls and pedestrian areas S1 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S2 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S3 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

eXPOSed areaS

Zones System build-up Sika® Mt Primer Sikalastic® 710

Membrane

Sikalastic® 735 al or 736 al lo-VOC

Wear Course i

Sikalastic® 735 al or 736 al lo-VOC

Wear Course ii

Parking stalls and pedestrian areas S4 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

14 mils (w.f.t.)10 mils (d.f.t.)

-

Traffic aisles S5 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

11 mils (w.f.t.)8 mils (d.f.t.)

16 mils (w.f.t.)12 mils (d.f.t.)

Heavy traffic areas such as turn aisles and ramps

S6 8-10 mils32 mils (w.f.t.)23 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

20 mils (w.f.t.)15 mils (d.f.t.)

• Sika® MT Primer must be used with this system, standardly applied as one coat at 8 – 10 mils, including for concrete moisture contents of up to 6%. • Sikalastic® Duochem 8200 may be used as required for ramps and ticket booths. Contact your Sika Canada Representative for advice. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

RAL 7015 Slate Grey

RAL 9017 Traffic Black

RAL 7046 Telegrey 2

RAL 7012 Basalt Grey

Wear Course Colours* Custom colours available on request

SySteMS Unless indicated otherwise, mils thicknesses equate to both w.f.t. and d.f.t., being 100% solids materials.

COVered areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 391Wear Course i

Sikalastic® duochem 391

Wear Course iiParking areas and pedestrian walkways SD1 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD2 8 - 10 mils 20 - 25 mils 25 mils - Driving lanes with ramps, turns and entrances SD3 8 - 10 mils 20 - 25 mils 18 mils 18 mils

eXPOSed areaS

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 394Wear Course i

Sikalastic® duochem 394Wear Course ii

Parking areas and pedestrian walkways SD4 8 - 10 mils 20 - 25 mils 18 mils -

Driving lanes SD5 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD6 8 - 10 mils 20 - 25 mils 18 mils 18 mils

HeaVy duty

Zones System build-up Sika® Mt Primer (1)

Sikalastic® duochem 390

Membrane

Sikalastic® duochem 8200Wear Course i

Sikalastic® duochem 8200Wear Course ii

Parking areas and pedestrian walkways SD7 8 - 10 mils 20 - 25 mils 18 mils -Driving lanes SD8 8 - 10 mils 20 - 25 mils 25 mils -Driving lanes with ramps, turns and entrances SD9 8 - 10 mils 20 - 25 mils 18 mils 18 mils

(1) Sika® MT Primer is provided as an option to increase adhesion in certain conditions and is recommended when moisture is present in the concrete. For standard applications or concrete moisture content of up to 6%, apply one coat at 8 - 10 mils. • Thicknesses above are minimums recommended for guideline purposes, if greater thicknesses are required please contact Sika Canada. • Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

SySteM build-uPS

Raw materials derived from rapidly renewable resources.

Recycled rubber synthetic aggregates (SA grades).

FeatureS beneFitS

Single component systems Ease of application with unlimited pot life restrictions

Seamless and fully bondedEliminates lateral water migration undermining durability

Elastomeric across temperature range

Excellent crack bridging even at low temperatures

Abrasion and chemical resistantHandles vehicle traffic and fluids as well as de-icing salts

Embedded aggregateIncreased mechanical properties and slip resistance

Surface applied and maintainable

Easily repaired and sustained

Options for wear courses in exposed areas

Enhanced wear and UV resistance, with broader colour choice

*Disclaimer: All colours shown are as accurate as printing methods and display screens permit. Results may differ due to variances in application technique and gloss levels may vary depending upon product used. Final colour selections should be made based upon actual samples. Please consult a Sika Technical Sales Representative for detailed advice.

Sd 3 / Sd 6 / Sd 9

Sd 1 / Sd 4 / Sd 7

SySteM build-uP

391 / 394 / 8200 Wear Course II

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Sd 2 / Sd 5/ Sd 8

391 / 394 / 8200 Wear Course I

390 Membrane

MT Primer

Page 5: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

Sika Car Park CaPabilitieS

ANCHORINGSika AnchorFix®

Sikadur®

SikaGrout®

CORROSION MITIGATION

Sika® Galvashield®

Sika® FerroGard®

Sika® Ebonex®

STEEL PRIMERS & BONDING AGENTSSikaTop® Armatec

Sikadur®

Sikagard®

SHALOW DEPTH REPAIR AND LEVELLING MORTARSSikaTop®

Sika® MonoTop®

SikaQuick®

Sikafloor®

Sika® Pronto®

Sikafloor® Level

PREBAGGED CONCRETE AND

DEEP/FULL DEPTH REPAIRS

Sikacrete®

Sika® Viscocrete®

CRACK INJECTION RESINSSikadur®

SikaFix®

MOISTURE MITIGATION SYSTEMS

Sikagard® EpoCemCA

Sikafloor® EpoCemCA

Sika® Primer

WATERPROOFINGSikaProof®

Sika® Greenstreak®

Sikalastic®

Sikalastic® Duodeck

SikaSwell®

Sikagard®

STRUCTURAL STRENGTHENING

Sika® CarboDur®

Sika® CarboShear

SikaWrap®

EXPANSION AND CONTROL JOINTSSikaflex®

Sikasil®

Sika® Duoflex®

Sikadur® Combiflex®

When it comes to construction, maintenance and refurbishment of parking structures, Sika can help you at virtually every stage of the process with a fully integrated and warranteed range of systems. These include: concrete admixtures, corrosion inhibitors, galvanic anodes and other forms of corrosion management; full-depth, patch or shallow repair mortars; anchoring adhesives and injection resins; joint sealants; penetrating sealers and protective/decorative coatings; right through to line marking materials for the deck membranes themselves. Sika has your car park covered!

The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelf life. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Product Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed in the Internet under www.sika.ca.

Sika Canada inC.Head Office601, avenue DelmarPointe-Claire, Quebec H9R 4A9

Other locationsTorontoEdmontonVancouver

An ISO 9001 certified companyPointe-Claire: ISO 14001 certified EMS

© S

ika

Cana

da In

c./S

ika

Solu

tion

s fo

r Par

king

Dec

ks/1

1.201

3/ar

SIKA SOLUTIONS FROM ROOF TO FOUNDATIONS

Also Available:

Joint Sealing

Sikaflex®Sikasil® Sikadur® Combiflex

Grouting and anchoring

SikaGrout®Sikadur®Sika anchorFix®

roofing Systems

Sarnafil®Sikaplan®Sikalastic®

Concrete Production

Sika® ViscoCrete®Sika® retarder® Sika® aerCa

Waterproofing Systems

SikaProof®, SikaFuko®Sika® Greenstreak®SikaSwell®, SikaFix®

Floor & Wall Systems

Sikafloor® Sikagard® Sikagard® duroplast

Concrete repair & Protection

Sika® Monotop®Sikatop®, Sikarepair® Sikagard®

Structural Strengthening

Sikadur®, Sika® Carbodur®SikaWrap®Sika® CarboShear

Sika Canada Inc., a member of the Sika Group, is a leader in the field of speciality chemicals, for construction and manufacturing industries. Our product lines feature high quality roofing systems, concrete admixtures, mortars and resins, sealants and adhesives, structural strengthening components, industrial and decorative flooring, as well as protective coatings and waterproofing systems. Our expertise is borne out of a global presence and served by strong, local support. Sika has earned the trust of our industries for over 100 years, by delivering the highest standards of commitment and partnership.

ECONOMIC AND DURABLE WATERPROOFING PROTECTION

REFURBISHMENTSIKA SOLUTIONS FOR PARKING DECKS

PROTECTIVE SEALERS

Sikagard®

Sikafloor®

Sika® Florseal

Sikalastic® Duocel

PROTECTIVE AND DECORATIVE COATINGSSikagard®

Sikagard® Duroplast

1-800-933-Sikaw w w . s i k a . c a

Page 6: Sika Car Park CaPabilitieS SIKA SOLUTIONS FROM … / S6 S2 / S5 S1 / S4 Parking structures are of critical importance in an era of ever increasing car ownership and use. They not only

Sika Car Park CaPabilitieS

ANCHORINGSika AnchorFix®

Sikadur®

SikaGrout®

CORROSION MITIGATION

Sika® Galvashield®

Sika® FerroGard®

Sika® Ebonex®

STEEL PRIMERS & BONDING AGENTSSikaTop® Armatec

Sikadur®

Sikagard®

SHALOW DEPTH REPAIR AND LEVELLING MORTARSSikaTop®

Sika® MonoTop®

SikaQuick®

Sikafloor®

Sika® Pronto®

Sikafloor® Level

PREBAGGED CONCRETE AND

DEEP/FULL DEPTH REPAIRS

Sikacrete®

Sika® Viscocrete®

CRACK INJECTION RESINSSikadur®

SikaFix®

MOISTURE MITIGATION SYSTEMS

Sikagard® EpoCemCA

Sikafloor® EpoCemCA

Sika® Primer

WATERPROOFINGSikaProof®

Sika® Greenstreak®

Sikalastic®

Sikalastic® Duodeck

SikaSwell®

Sikagard®

STRUCTURAL STRENGTHENING

Sika® CarboDur®

Sika® CarboShear

SikaWrap®

EXPANSION AND CONTROL JOINTSSikaflex®

Sikasil®

Sika® Duoflex®

Sikadur® Combiflex®

When it comes to construction, maintenance and refurbishment of parking structures, Sika can help you at virtually every stage of the process with a fully integrated and warranteed range of systems. These include: concrete admixtures, corrosion inhibitors, galvanic anodes and other forms of corrosion management; full-depth, patch or shallow repair mortars; anchoring adhesives and injection resins; joint sealants; penetrating sealers and protective/decorative coatings; right through to line marking materials for the deck membranes themselves. Sika has your car park covered!

The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelf life. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Product Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed in the Internet under www.sika.ca.

Sika Canada inC.Head Office601, avenue DelmarPointe-Claire, Quebec H9R 4A9

Other locationsTorontoEdmontonVancouver

An ISO 9001 certified companyPointe-Claire: ISO 14001 certified EMS

© S

ika

Cana

da In

c./S

ika

Solu

tion

s fo

r Par

king

Dec

ks/1

1.201

3/ar

SIKA SOLUTIONS FROM ROOF TO FOUNDATIONS

Also Available:

Joint Sealing

Sikaflex®Sikasil® Sikadur® Combiflex

Grouting and anchoring

SikaGrout®Sikadur®Sika anchorFix®

roofing Systems

Sarnafil®Sikaplan®Sikalastic®

Concrete Production

Sika® ViscoCrete®Sika® retarder® Sika® aerCa

Waterproofing Systems

SikaProof®, SikaFuko®Sika® Greenstreak®SikaSwell®, SikaFix®

Floor & Wall Systems

Sikafloor® Sikagard® Sikagard® duroplast

Concrete repair & Protection

Sika® Monotop®Sikatop®, Sikarepair® Sikagard®

Structural Strengthening

Sikadur®, Sika® Carbodur®SikaWrap®Sika® CarboShear

Sika Canada Inc., a member of the Sika Group, is a leader in the field of speciality chemicals, for construction and manufacturing industries. Our product lines feature high quality roofing systems, concrete admixtures, mortars and resins, sealants and adhesives, structural strengthening components, industrial and decorative flooring, as well as protective coatings and waterproofing systems. Our expertise is borne out of a global presence and served by strong, local support. Sika has earned the trust of our industries for over 100 years, by delivering the highest standards of commitment and partnership.

ECONOMIC AND DURABLE WATERPROOFING PROTECTION

REFURBISHMENTSIKA SOLUTIONS FOR PARKING DECKS

PROTECTIVE SEALERS

Sikagard®

Sikafloor®

Sika® Florseal

Sikalastic® Duocel

PROTECTIVE AND DECORATIVE COATINGSSikagard®

Sikagard® Duroplast

1-800-933-Sikaw w w . s i k a . c a