siemens corporate design powerpoint-templatesof nx cad, nx mold design and nx cam helped us realize...

Package DesignSmart Innovation for a Competitive Edge

Realize InnovationRestricted © Siemens AG 2016

If you could connect your whole packaging development process together what could you achieve?Ur

Restricted © Siemens AG 201607.26.2016 Siemens PLM Software

A connected processJyothy Laboratories

Reduced product development time by more than 50 percent

Achieved a 50 percent cost savings in design

Improved productivity by 35 percent

Improved quality and reduced errors by 75 percent

“There’s no question that the integrated solutions of NX CAD, NX Mold Design and NX CAM helped us realize faster time-to-market, gain a larger market share and produce better-quality products.”

G. Viswanathan Assistant Manager, CAD/CAM Jyothy Laboratories


“Idea to shelf” workflowLinking the entire process

Concept Development

Detail Design

Secondary Packaging Validation Tooling Process

ValidationVirtual Store

/ Shelf Design


Ideation


3D Concepts

Raster Import allows creation of base design data from artwork

Fully integrated suite of tools forprimary package development

No data conversion saves timeand improves quality


3D Concepts

Single suite of tools to enable rapid development of 3D Concepts from initial concept to detail package

No data translation = no rework and noloss of control


3D Concepts

Material Fill

Quickly understand fill levels and adapt shapes to meet package demands


Generate and visualize label regions

Die line generation

Visualize label & decals from artwork management solutions

Label Design, Integration & Validation


Share and reuse knowledge

Re-use standard geometry & components for closures

Capture and share standard configurations

Templates and standardization



Concept Development

Detail Design



/ Shelf Design


Secondary Packaging Design

Link secondary package to primary packages

• Associative flattening of card based secondary packages

• Complex plastic packaging

• Integrate Decaling and Rendering

Advanced Rendering


Managing Change

Change is inevitable

• Fully associate change throughout the whole process



Concept Development

Detail Design



/ Shelf Design


Integrating Tooling Development

Full associativity between product and mold models allows rapid response to primary package change

• Reuse tooling knowledge and best practice

• Complete suite of analysis tools to predictmanufacturing performance


Confidence in design

Reuse design data through product validation, reducing cost and risk by validating against product requirements

• Design Idealization

• Structural Analysis - Crush

• Computational Fluid Dynamics


Confidence in DesignIntegrated through to machine design

Operations

Motion Control

Drives & Actuators

Mechanical

Sensors



Concept Development

Detail Design



/ Shelf Design


NX from Packaging to Point of SaleKesslers International

Design changes per mold from 2.2 to 0.7 Sample parts delivered 30 minutes after design Substantial re-keying and related errors eliminated Substantially improved results in terms of time, cost and quality Repeat business; new customers

“We know it works because we measure success through order increases and complaint reductions. We have a very, very low level of complaints. We have a good level of customer satisfaction and our customers keep coming back. And we have important new customers. That is the best proof we can have.”

George Kessler CBEGroup Director

Kesslers International

siemens corporate design powerpoint-templatesof nx cad, nx mold design and nx cam helped us realize...

Documents