shop & field services coatings & linings · 2018-02-14 · shop & field services...
TRANSCRIPT
SHOP & FIELD SERVICES SURFACE PREPARATION COATINGS & LININGS
Protective Coatings provides coating and lining ser-vices either at your facility or ours. Our portable sur-face preparation, coating & lining equipment are easily moved. Some of the additional services we offer:
ASME Code Fabrication & Repairs
Tank & Pipe Rubber Lining
Rubber Removal
High Pressure Washing
Chemical Cleaning
Wet Abrasive Blasting
Epoxy & Urethane Coatings
Protective & High Performance Coatings
NACE Level III Inspections
Coatings Analysis & Recommendations
Rubber Inspection & Recommendation
Mitigation Information
100% Solids and Plural Component
Abrasion Resistant Rubber Linings
Corrosion Resistant Rubber Linings
We specialize in working with customers to protect their equipment and assets in the industrial market. We lead the way in being committed to utilizing the most ad-vanced technology to evaluate, safely prepare and ap-ply long term protective coatings. We apply coatings and linings in storage tanks, and piping for interior and/or exterior surfaces.
Chemical containment
Machine, wall, ceiling and maintenance painting
Potable water and food industry
Waste Water
Commercial Pool/Spa coating
100% solids and plural coatings
Intumescent coating and Fireproofing
Floor coatings Epoxy/urethane and repair
Inspection Services
Abrasive blasting
Chemical, power tool, hand tool and solvent cleaning
We are the only company in the area that employs a NACE Level III (National Assosciation of Corrosion Engineers) certified corrosion and coating inspector, which is unique in the industrial coatings business. A NACE certified coating inspector is on site for every project. Count on us to review, interpret, or assist in developing specifications for your project, including coating and material selection. We involve top coating
Products We Apply
(Partial List)
Field Work
On many occasions, it is either difficult or im-possible to remove an item from service and send it out for inspection, repair, relining or re-coating. In instances like this, our trained tech-nicians will travel to your facility and perform all of the necessary work.
Safety
On-Site Safety Inspection Checklist
Pre-Job Hazard Assessment
On-Site Toolbox Safety Meetings
Confined Space Entry Procedures
All receive OSHA 30 hour Safety Training
Ongoing Safety Training Program
Confined Space Entry
Full Body Harnesses & Life Lines
Tripods & Retrieval Winches
Air Quality Monitors
SCBA Respirators w/Escape Bottles
Air Movers & Blowers
Fall Protection Equipment
Full Body Harnesses
Shock Absorbing Fall Lanyards
Winches with Centrifugal Brakes
Blast Equipment
6 Cu Ft Blast Pots
0.5 Cu Ft Blast Pot
Portable Air Compressors
Air Dryers
Bristle Blasting Equipment
Wet Blast Equipment
Duct Collector
Grit Recovery System
Protective Coatings, Inc.
1602 Birchwood Ave.
Fort Wayne, IN 46803
PH: (260) 424-2900
FX: (260) 422-7147
Web: www.proco-fwi.com