shigenobu kainuma
TRANSCRIPT
1
28/6/2021
Shigenobu KAINUMA
Department of Engineering, Kyushu University
Specialty
Corrosion, Fatigue, Steel Structure, Maintenance Engineering
Career
1994.04 Research Associate, Department of Civil Engineering, Nagoya University
2001.04 Associate Professor, Department of Civil Engineering, Gifu University
2003.04 Associate Professor, Information and Multimedia Center, Gifu University
2004.11 Associate Professor, Department of Civil Engineering, Kyushu University
- Additional position
2015.10-2021.03 Visiting Research Scholar, National Institute of Advanced Industrial Science and
Technology (AIST)
2016.06-2019.03 Visiting Professor, Department of Civil Engineering, Hohai University
Research Activity
Journal Papers /-1993
- S. Kainuma, I. Dote, K. Yamashita and Y. Kuwahara : Estimation of Corrosion Progress for
Spheroidal Graphite Cast Iron based on Corrosion Characteristic of Illumination Pole used for 24 years,
Rust Prevention & Control, 2021. (in Press)
- S. Kainuma, R. Higuchi and M. Yang : Fundamental Study on Corrosion Characteristics between
Each Steel Substrate of Adjacent Paint Coating Defects in Immersion and Wet-dry Cyclic
Environments, Zairyo-to-Kankyo, 2021. (in Press)
- I. Dote, Y. Kuwahara, K. Yamashita, N. Kai, S. Okada and S. Kainuma : Study on Corrosion
Progression of Spheroidal Graphite Cast Iron in Atmospheric Environment, Zairyo-to-Kankyo, 2021.
(in Press)
- M. Yang and S. Kainuma : Investigation of Steel Corrosion Near The Air-Liquid Interface in NaCl
Solution and Soil Environment, Corrosion Engineering Science and Technology, Vol.21, pp.987-1003,
2021.
- S. Kainuma, M. Yang, J. Xie and Y. S. Jeong : Time-dependent prediction on the localized corrosion
of steel using spatial statistical simulation, International Journal of Steel Structures, Vol.21, pp.987–
1003, 2021.
- S. Kainuma, M. Yang, Y. Gao and M. Hashimoto : Long-Term Deterioration Mechanism of Hot-Dip
Aluminum Coating Exposed to A Coastal-Atmospheric Environment, Construction and Building
2
Materials, Vol.280, pp.1-16, 2021.
- S. Kainuma, H. Yang, M. Yang, K. Muto and H. Miyata : Corrosion Resistance and Anti-Corrosion
Characteristics of Interface between Al-5mg Thermal Sprayed Coating and Heavy Duty Paint Coating
in Airborne Sea Salt Environment, Journal of JSCE, A1, Vol.77, No.1, pp.180-198, 2021.
- S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi and T. Asano : Characterizing Corrosion Properties
of Carbon Steel Affected by High-Power Laser Cleaning, Construction and Building Materials,
Vol.274, pp.1-11, 2021.
- S. Iio, S. Kainuma and S. Ishihara : Fundamental Study on Electrochemical Surface Treatment of
Severely Corroded Unpainted Weathering Steel Member, Journal of Constructional Steel, Vol.28,
pp.1-9, 2020.
- I. Dote, S. Kainuma, Y. Kuwahara and N. Kai : Evaluation of Rust on Spheroidal Graphite Cast Iron
in Atmospheric Corrosion Environment, Journal of Constructional Steel, Vol.28, pp.208-213, 2020.
- S. Ishihara, S. Kainuma, Y. Gao, D. Inoue and M. Hashimoto : Fundamental Study on Corrosivity of
Hot Dip Aluminum Coating Due to Contact With Dissimilar Materials, Journal of Constructional Steel,
Vol.28, pp.45-52, 2020.
- S. Zhuang, S. Kainuma, M. Zhao, H. Manabu and T. Asano : Mechanical Properties and Fracture
Mechanism of Laser-Treated Carbon Steel Under Monotonic Tensile Test, Journal of Constructional
Steel, Vol.28, pp.285-291, 2020.
- Q. Wang, S. Kainuma and M. Yang : Fundamental Study on The Relationship Between Rust
Characteristics and Corrosion Degree of Common Steel, Journal of Constructional Steel, Vol.28, pp.
267-273, 2020.
- H. Yang, S. Kainuma, K. Muto, H. Miyata and S. Ochi : Fundamental Study on Weather Resistance
of Overlapping Layers Between Al-5mg Alloy Thermal Spraying Coating and Heavy-Duty Paint
Coating, Journal of Constructional Steel, Vol.28, pp. 267-273, 2020.
- S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi, T. Asano : Investigation on the Peak Temperature
and Surface Defects on the Carbon Steel Treated by Rotating CW Laser, Optics & Laser Technology,
Vol.135, pp.1-9, 2020.
- S. Kainuma, K. Hasegawa and M. Yang : Fundamental Study on Electrochemical Properties of
Macrocell Corrosion between Adjacent Paint Coating Defects, Journal of JSCE, A1, Vol.76, No.3,
pp.467-480, 2020.
- S. Kainuma and A.R. Kim : Fundamental Investigation on Adhering Method for NaCl Particle by
Ultrasonic Spray and Its Characteristics, Rust Prevention & Control, Vol.64, No.6, pp.201-2011, 2020.
- I. Dote, Y. Kuwahara, N. Kai and S. Kainuma : Initial Corrosion Behavior of Ductile Cast Iron in
Atmospheric Environment, Zairyo-to-Kankyo, Vol.69, No.5, pp.140-147, 2020.
- T. Miyazaki, S. Kainuma and T. Takeda : Numerical Simulations for Corrosion Surface of Common
Carbon and Unpainted Weathering Steel Plates in Atmospheric Corrosive Environments Using Spatial
3
Statistical Techniques, Journal of Structural and Materials in Civil Engineering, No.35, pp.107-113,
2018.
- M. Yang, S. Kainuma, S. Ishihara, A. Kaneko and T. Yamauchi : Atmospheric corrosion protection
method for corroded steel members using sacrificial anode of Al-based alloy, Construction & Building
Materials, Vol.234, pp.1-12, 2019.
- M. Yang, S. Kainuma, S. Zhuang, S. Ishihara, A. Kaneko and T. Yamauchi : Cathodic Protection
System Applied to Steel Using Fiber Sheet and Al-based Alloy Anode in Atmospheric Environment,
International Journal of Electrochemical Science, Vol.14, pp.9858-9875, 2019.
- M. Kazuyoshi, S. Kainuma, J. Du, S. Liu, M. Yang and H. Miyata : Corrosion Resistance and Anti-
Corrosion Performance of Overlapping Layers Between Al-5mg Thermal Sprayed Coating and Heavy
Duty Paint Coating with a Cross-Cut Defect, Journal of JSCE, A1, Vol.75, No.3 pp.280-292, 2019.
- T. Miyazaki, S. Kainuma and K. Hasegawa : Fundamental Study on Electrochemical Mechanism
Between Adjacent Defects of Organic Zinc Paint Coating on Common Steel, Journal of Constructional
Steel, Vol.27, pp.353-358, 2019.
- K. Muto, S. Kainuma, S. Liu, M. Yang and H. Miyata : Fundamental Study on Improvement of
Corrosion Resistance of Interface Between Al-5mg Thermal Sprayed Coating and Heavy Duty Paint
Coating, Journal of Constructional Steel, Vol.27, pp.359-365, 2019.
- W. Xu, S. Kainuma, M. Yang and M. Yamauchi: Fundamental Study on Corroded Surface
Configuration of Root Part of Steel Finger Plate in Highway Bridge, Journal of Constructional Steel,
Vol.27, pp. 391-397, 2019.
- T. Takeda, S. Kainuma, Y. Nakano and K. Ogata: Corrosivity Evaluation of Urban Highway Bridges
in Various Atmospheric Environments, Journal of Constructional Steel, Vol.27, pp. 366-373, 2019.
- K. Amano, M. Moriyama, S. Kainuma, D. Inoue and S. Ishihara : Evaluation for Anti-Corrosive
Performance of Cement-Based Undercoat Mixed with Blast-Furnace Slag, Journal of Constructional
Steel, Vol.27, pp. 346-352, 2019.
- S. Kainuma, A. Kim, T. Ikeda and T. Kotera : Effect of Abrasive Material and Blasting Conditions
on Characteristics of Steel Surface and the Residual Degree, Rust Prevention & Control, Vol.63, No.8,
pp.285-300, 2019.
- S. Kainuma, M. Yang, S. Ishihara, A. Kaneko and T. Yamauchi : Corrosion Protection of Steel
Members Using An Al-Zn Base Sacrificial Anode and Fiber Sheet in An Atmospheric Environment,
Construction & Building Materials, Vol.224, pp.880-893, 2019.
- S. Kainuma, K. Yamashita, S. Ishihara, A. Kaneko and T. Yamauchi : Applicability of Anti-
corrosive Method with Sacrificial Anode using Al-3Zn Alloy Casting Plate and Cross-linked Acrylate
Fiber Sheet in Atmospheric Environment, Rust Prevention & Control, Vol.63, No.5, pp.161-176, 2019. - Z.Y.Zhou, B.Ji, Z.Fu, S.Kainuma and S.Tsukamoto : Fatigue Crack Retrofitting by Closing Crack
Surface, International Journal of Fatigue, Vol.119, 229-237, 2019.
4
- T. Takeda, S. Kainuma, K. Ogata and Y. Nakano : Corrosivity Evaluation of Urban Highway
Bridgesin Vaious Atmospheric Environment, Journal of Structural and Materials in Civil Engineering,
No.34, pp.97-104, 2018.
- Y. Gao, M. Yang, S. Kainuma, S. Ishihara and M. Hashimoto:Electrochemical Properties of Hot-
dip Aluminized Coating in Alkaline Environment, Journal of Structural and Materials in Civil
Engineering, No.34, pp.89-95, 2018.
- S. Liu, S. Kainuma, J. Du, K. Muto and H. Miyata : Fundamental Study on The Corrosion Resistance
for Overlapping Layers between Al-5Mg Thermal Sprayed Coating and Heavy Duty Paint Coating,
Journal of Structural and Materials in Civil Engineering, No.34, pp.36-57, 2018.
- S. Kainuma, G. Mashimoto, M. Yang and T. Sajima : Fundamental Study on Electrochemical
Mechanism between Adjacent Paint Coating Defects of Common Carbon Steel, Zairyo-to-Kankyo,
Vol. 67, No.11, pp. 467-473, 2018.
- K. Mutoh, S. Kainuma, S. Liu, J. Du and H. Miyata : Characteristics of Corrosion Resistance and
Anti-Corrosion for Overlapping Layers between Al-5Mg Thermal Splayed Coating and Heavy Duty
Paint Coating in Airborne Sea Salt Environment, Journal of Constructional Steel, Vol.26, pp.412-419,
2018.
- S. Kainuma, D. Inoue, K. Amano, M. Moriyama and S. Ishihara : Fundamental Investigation on
Application of Cement-based Paint to Anti-corrosive Undercoating at Corner of Steel Member, Journal
of Constructional Steel, Vol.26, pp.736-743, 2018.
-A.R. Kim, S. Kainuma, T. Ikeda and T. Kotera: Effect of Repeated Use of Abrasive Material on Steel
Surface Characteristics, Journal of Constructional Steel, Vol.26, pp.307-311, 2018.
- S. Kainuma, M. Yang and S. Ishihara : Corrosivity Evaluation for Steel Members near the
Atmosphere-liquid Interface using the Ground Corrosion Sensor, Zairyo-to-Kankyo, Vol. 67, No.10,
pp.404-415, 2018.
- L. Liu, C.N. Xu, A. Yoshida, D. Tu, N. Ueno and S. Kainuma : Scalable Elasticoluminescent Strain
Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis, Advanced Materials
Technology, 1800336, 2018.
- K. Amano, M. Moriyama, M. Ikeda, H. Makoto and S. Kainuma : Electrochemical study on Blast
Furnace Slag Mixed Cement-based Anticorrosive Paint, Zairyo-to-Kankyo, Vol. 67, No.8, pp.191-201,
2018.
- S. Kainuma, M. Yang, and Y.S. Jeong : Fatigue Behavior Investigation and Stress Analysis for Rib-
To-Deck Welded Joints in Orthotropic Steel Decks, International Journal of Steel Structures, Vol.18
pp.512-527, 2018.
- S. Kainuma, Y. Yamamoto, J.H. Ahn and Y.S. Jeong : Evaluation method for time-dependent
corrosion depth of uncoated weathering steel using thickness of corrosion product layer, Structural
Engineering and Mechanics, Vol. 65, No.2, pp.191-20, 2017.
5
- K. Yagi, S. Kainuma, M. Hirao : Fundamental Study on Corrosive Environment Monitoring for Steel
Structural Members Considering Thermal Conductivity, Journal of Constructional Steel, Vol.33,
pp.49-57, 2017.
- Y.S. Jeong, S. Kainuma and J.H. Ahn, W.H. Lee : Assessment of Fatigue Life of Out-Of-Plane Gusset
Welded Joints Using 3D Crack Propagation Analysis, Journal of the Korea Institute for Structural
Maintenance and Inspection, Vol.22, No.31, pp.129-136, 2017.
- M. Yang, S. Kainuma and Y.S. Jeong : Structural Behavior of Orthotropic Steel Decks with Artificial
Cracks in Longitudinal Ribs, Journal of Constructional Steel Research, Vo.141 pp.132-144, 2017.
- S. Kainuma, Y. Yamamoto, J.H. Ahn and Y.S. Jeong : Evaluation method for time-dependent
corrosion depth of uncoated weathering steel using thickness of corrosion product layer, Structural
Engineering and Mechanics, Vol. 65, No.2, pp.191-20, 2017.
- S. Kainuma, M. Yang and Y.S. Jeong : Fatigue Behavior Investigation and Stress Analysis for Rib-
To-Deck Welded Joints in Orthotropic Steel Decks, International Journal of Steel Structures, Vo.141
pp.132-144, 2017.
- D. Inoue, D. Uchida, K. Asano, S. Kainuma and G. Mashimoto : Configuration and Slip Coefficient
of Friction Surface for High Strength Bolted Connection With Weathering Steel, Journal of
Constructional Steel, Vol.25, pp.48-54, 2017.
- A.R. Kim, S. Kainuma, R. Watanabe, T. Ikeda and T. Kotera : Effect of Blasting Treatment Conditions
on Characteristics of Steel Surface and Residual Abrasive Material, Journal of Constructional Steel,
Vol.25, pp.737-742, 2017.
- K. Hirono, M. Fukuda, K. Muto, S. Kainuma and M. Sugimoto : Measurement of Surface Roughness
of The Blasted Steel Plate With A Laser Light Scattering, Journal of Constructional Steel, Vol.25,
pp.713-720, 2017.
- K. Tanigawa, S. Kainuma, S. Inokuchi, T. Sakamoto and S. Ishihara : Evaluation of Influence Factors
on Paint Coating Deterioration and Corrosion in Welded Joint, Journal of Constructional Steel, Vol.25,
pp.747-752, 2017.
- A. Ikeda, N. Kai, K. Shiimoto and S. Kainuma : Corrosion Behavior of Spheroidal Graphite Cast
Iron under Atmospheric Environment, Journal of Constructional Steel, Vol.25, pp. 679-683, 2017.
- S. Kainuma, J. Du, K. Muto, M.Yang and H. Miyata : Fundamental Study on Improving Method of
Corrosion Resistance for Overlapping Layer Between Al-5mg Thermal Sprayed Coating and Heavy
Duty Paint Coating, Journal of Constructional Steel, Vol.25, pp.673-678, 2017.
- K. Yagi, S. Kainuma, S. Kato and N. Ishida : Corrosivity Evaluation of Respective Structural Parts
in Steel River Gate, Journal of Constructional Steel, Vol.25, pp.721-728, 2017.
- H. Momota, S. Kainuma, A. Tabata, S. Inokuchi and S. Tsukamoto : Electrochemical Fundamental
Investigation on Galvanic Corrosion Characteristics Between Bridge Finger Plate and Drain Gutter
and The Anti-Corrosion Method, Journal of Constructional Steel, Vol.25, pp.684-687, 2017.
6
- K. Muto, S. Kainuma, J. Du, K. Yagi and H. Miyata : Characteristics of Corrosion Resistance and
Anti-Corrosion for Overlapping Layers Between Al-5mg Thermal Sprayed Coating and Heavy Duty
Paint Coating in an Atmospheric Environment, Journal of Constructional Steel, Vol.25, pp.708-712,
2017.
- S. Kainuma, K. Yagi, M. Hirao, Mi. Hashimto and A. Uto : Corrosion Resistance and Anti-Corrosion
of Hot-Dip Aluminum Plated Pier Exposed About 25-Yrs in a Coastal Environment, Rust Prevention
& Control, Vol.723, No.9, pp.329-340, 2017.
- S. Kainuma, H. Fujimoto, J. Du, M. Yang, K. Muto and H. Miyashita : Fundamental Study on
Corrosion Resistance and Anti-Corrosion of Interface Between Al-5mg Thermal Sprayed Coating and
Heavy Duty Paint Coating, Journal of JSCE, A1, Vol.73, No.2, pp.496-511, 2017.
- S. Kainuma, M. Yang, Y.S. Jeong, S. Inokuchi, A. Kawabata, D. Uchida : Analysis Investigation for
Fatigue Behavior of Rib-to-Deck Welded Joints With Different Structural Parameters in Orthotropic
Steel Decks, Engineering Failure Analysis, Vol.79 pp.520-537,2017.
- A. Yoshida, L. Liu, D. Tu, S. Kainuma, C.N. Xu : Mechanoluminescent Testing as an Efficient
Inspection Technique for the Management of Infrastructures, Journal of Disaster Research, Vol.12,
No.3, pp.506-514, 2017.
- S. Kainuma, Y. Tsuchihashi, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Study on
Atmospheric Corrosion Protection Method With Al-Zn Sacrificial Anode and Fiber Sheet for Steel
Members, Journal of JSCE, A1, Vol.73, No.2, pp.313-329, 2017.
- S. Inokuchi, D. Uchida, Y.S. Jeong And S. Kainuma : Experimental Study on Fatigue Strength of the
Remained Lifting Piece Welded to Orthotropic Steel Decks, Journal of Structural Engineering, Vol.24,
No.93, pp.73-81, 2017.
- S. Kainuma, X. Guo, J. Kobayashi, K. Utsunomiya and T. Sakamoto : Influence of Size And
Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel Plates, Journal of JSCE, ,
Vol.73, No.1, pp.84-97, 2017
- S. Kainuma, X. Guo, J. Kobayashi, K. Muto and H. Miyata : Fundamental Study on Anti-Corrosion
Characteristics of Al-5Mg Alloy Thermal Spraying Coatings in Highly Corrosive Environment With
NaCl, Journal of JSCE, A1, Vol.72, No.3, pp.440-452, 2016.
- D. Tabuchi, T. Sajima, S. Kainuma, N. Yagi and D. Uchida : Investigation On Groove Machining Of
Turnaround Weld Toes For Improvement Of Fatigue Strength Of Out-Of-Plane Gusset, Journal of
Constructional Steel Vol.24, pp.590-597, 2016.
- S. Kainuma, K. Yagi, X. Guo, J. Kobayashi and T. Sajima : Fundamental Study on Machining Method
for Cross-cut of Coating Test Specimen, Journal of Constructional Steel, Vol.24, pp.733-739, 2016.
- H. Momota, S. Kainuma, Y.S. Jeong, A. Tabata and S. Tsukamoto : Fundamental study on corroded
surface figuration of fatigue-cracked bridge finger joint, Journal of Constructional Steel, Vol.24,
pp.701-704, 2016.
7
- S. Kainuma and N. Hosomi : Fundamental Investigation on Time-dependent Corrosion Behavior for
Steel Member in Boundary With Concrete, Concrete Journal, Vol.54, No.9, pp.259-269, 2016.
- S. Kainuma, Y. S. Jeong, M. Yang and S. Inokuchi : Welding Residual Stress in Roots Between Deck
Plate and U-Rib in Orthotropic Steel Decks, Measurement, Vol.92, pp.475-482, 2016.
- S. Kainuma, M. Michino, Y. Yamamoto, Y. Fujioka, A. Warashina, I. Takaki and K. Naka : Estimation
of Corrosion Damage and Evaluation of Corrosivity for Unpainted Weathering Steel Deck Truss
Bridge (Part 3) , Rust Prevention & Control, Vol.60, No.9, pp.338-346, 2016.
- S. Kainuma, Y. Tsuchihashi, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study
on Anti-corrosive Method With Sacrificial Anode for Steel Members using Al-Zn Alloy Casting Plate
and Fiber Sheet in Atmospheric Environment, Corrosion Engineering, Vol.65, No.9 pp.309-318, 2016.
- S. Kainuma, M. Micino, Y. Yamamoto, Y. Fujioka, A. Warashina, I. Takaki and K. Naka : Estimation
of Corrosion Damage and Evaluation of Corrosivity for Unpainted Weathering Steel Deck Truss
Bridge (Part 2) -Evaluation of Corrosive Environment and Analysis of Corrosion Factor-, Rust
Prevention & Control, Vol.60, No.8, pp.298-305, 2016.
- J.H. Ahn, S. Kainuma, W.H. Lee, Y.S. Jeong, I.T. Kim : Relationships Between Imperfections and
Shear Buckling Resistance in Web Plate With Sectional Damage Caused by Corrosion, Advances in
Materials Science and Engineering, Vol.2016, Article ID 6467589, 12 pages, 2016.
- Y. Fujioka, A. Warashina, I. Takaki, K. Naka, S. Kainuma, M. Michino and Y. Yamamoto : Estimation
of Corrosion Damage and Evaluation of Corrosivity for Unpainted Weathering Steel Deck Truss
Bridge (Part 1) -Investigation of Corrosion Damage-, Rust Prevention & Control, Vol.60, No.5,
pp.165-172, 2016.
- T. Sakamoto, S. Kainuma : Investigation of Corrosivity Evaluation for Coated Steel Structures Using
Coated Steel Plate With Corrosion Damage, Rust Prevention & Control, Vol.60, No.5, pp.165-172,
2016.
- S. Kainuma, M. Yang, Y.S. Jeong, S. Inokuchi, A. Kawabata and D. Uchida : Experiment on Fatigue
Behavior of Rib-To-Deck Weld Root in Orthotropic Steel Decks, Journal of Constructional Steel
Research, Vo.119, pp.113-122, 2016.
- T. Sakamoto, S. Kainuma, J. Kobayashi : The Basic Research of the Coated Steel Plate about the
Relationship Between the Coating Durability and the Characteristics of Rust, Zairyo-to-Kankyo,
Rapid Communication, Vol.64, No.7, pp.307-310, 2015.
- R. Watanabe, S. Kainuma, Y. S. Jeong and S. Tsukamoto : Influence of Chemical Surface Preparation
on Uncoated Carbon Steel, Journal of Constructional Steel, Vol.23, pp.372-377, 2015.
- T. Kitagawa, S. Kainuma, J. Kobayashi and S. Kaku : Fundamental Study on the Durability of
Repainted Steel Plates With Water Based Paint Remover, Journal of Constructional Steel, Vol.23,
pp.489-492, 2015.
- S. Kainuma, Y. S. Jeong, J. H. Ahn, Y. Yamagami and S. Tsukamoto : Behavior and Stress of
8
Orthtropic Deck With Bulb Rib by Surface Corrosion, International Constructional Steel Research,
Vol.113, pp.135-145, 2015.
- S. Kainuma, J. H. Ahn, Y. S. Jeong, H. Sugiyama and M. Iwasaki : Evaluation of Structural Responses
on Artificial Fatigue Crack for Bulb Rib Orthotropic Deck, Advanced in Structural Engineering,
Vol.18, No.9, pp.1355-1369, 2015.
- S. Kainuma, Y. S. Jeong, J. H. Ahn : Stress Distribution on the Real Corrosion Surface of the
Orthotropic Steel Bridge Deck, Steel and Composite Structures, Vol. 18, No. 6, pp.1479-1492, 2015. - S. Kainuma : Corrosion Surface of Structural Steel under Atmospheric Environment and Its Time-
dependent Prediction, Journal of The Surface Science Society of Japan, Vol.36, No.1, pp.35-40, 2015.
- T. Imamura, Y. Yamashita, T. Matsuda, M. Iwasaki, J. Nagata and S. Kainuma : Countermeasure
Against Fatigue Cracks of Vertical Stiffener With the Floor Frame Support in the Non-Composite
Stiffening Trusses Suspension Bridge, Journal of Structural Engineering, Vol.61A, pp. 473-485, 2015.
- S. Ishihara, S. Kainuma, D. Uchida, A. Kaneko and T. Yamauchi
Atmospheric Corrosion Monitoring Sensor With High Durability Combined Porous Sintered Al-Zn
Plate and Water Retentive Fiber Sheet, Journal of Constructional Steel, Vol.22, pp.477-481, 2014.
- Y. Tsucihashi, S. Kainuma, T. Tomoda and K. Minami : Corrosion Protection Method With Sacrificial
Anode for Steel Members in Boundary With Ground using Swelling Rubber, Journal of Constructional
Steel, Vol.22, pp.924-930, 2014.
- M. Fujii and S. Kainuma : Influence of Processing Condition of Abrasive Blasting on Steel Surface
Roughness, Journal of Constructional Steel, Vol.22, pp.469-476, 2014.
- M. Michino, S. Kainuma, H. Hayashi, Y. S. Jeong and M. Itati : Effect of Heat Capacity on Corrosion
Behavior of Uncoated Steel Plate under Atmospheric Environment, Journal of Constructional Steel,
Vol.22, pp.938-942, 2014.
- S. Kainuma, J. Kobayashi and Y. Yamamoto : Corrosion-Retarding Effect for Unpainted Steel in
Airborne Salt Environment by Water Cleaning, Journal of Constructional Steel Vol.22, pp.917-923,
2014.
- Y. S. Jeong, S. Kainuma, N. Yagi and D. Uchida : Evaluation for fatigue growth prediction of
elliptical crack in gusset welded joint using FRANC3D, Journal of Constructional Steel Vol.22,
pp.789-794, 2014.
- T. Sakamoto, T. Ohta and S. Kainuma : Evaluation of Mass Change of The Coated Corroded-Steel
Plate by Accelerated Deterioration Test, Journal of Constructional Steel Vol.22, pp.504-509, 2014.
- N. Hosomi, T. Yamada and S. Kainuma : Contactless and Non-Destructive Inspection System of
Corrosion damage for Steel Members in Boundary With Ground, Journal of JCMA, Vol. 66, No.7,
pp.52-56, 2014.
- S. Ishihara, S. Kainuma, M. Kinoshita, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study
on Corrosion Protection Effect With Sacrificial Anode for Corroded Steel Members using Porous
9
Sintered Plate and Fiber Sheet in an Atmospheric Environment, Corrosion Engineering, Vol.63, No.12,
pp. 497-505, 2014.
- S. Kainuma : Current status and issues of Corrosion Damage in Steel Highway Bridges, Rust
Prevention & Control Japan, Vol.58, No.11, pp.432-439, 2014.
- S. Kainuma, J. H. Ahn and Y. S. Jeong : Investigation on The Stress Concentration Effect at The
Corroded Surface Achieved by Atmospheric Exposure Test, Materials Science & Engineering A,
Vol.602, No.25, pp.89-97, 2014.
- S. Kainuma, J. H. Ahn, Y. S. Jeong, T. Imamura and T. Matsuda : Applicability and Structural
Response Comparisons for Bearing System Replacement in Suspension Bridge Rehabilitation, Journal
of Constructional Steel Research, Vol.95, pp.172-190, 2014.
- S. Kainuma, Y. Yamamoto, H. Hayashi, Y. Itoh and W. Oshikawa : Practical Method for Estimating
Time-Dependent Corrosion Depth of Uncoated Carbon Steel Plate under Atmospheric Environment
using Fe/Ag Galvanic Couple ACM-Type Corrosion Sensor, Corrosion Engineering, Vol.63, No.2, pp.
44-53, 2014. - S. Kainuma, K. To, D. Uchida, N. Yagi and H. Kubo : Fatigue Behavior of Out-of-plane Gusset Joints With One Side Fillet Weld, Quarterly Journal of The Japan Welding Society, Vol.31, No.4, pp.238-245, 2013. - Y. Itoh and S. Kainuma : Fundamental Study on Output Characteristic of Fe/Ag Galvanic Couple
ACM-Type Corrosion Sensor under Environment of Carbon Dioxide Gas, Rust Prevention & Control,
No.11, pp.203-207, 2013.
- S. Ishihara, S. Kainuma, A. Kaneko and T. Yamauchi: Influence of Installation Method of Sacrificial
Anodes on Anticorrosive Effects for Steel Member in Atmospheric Environment, Journal of
Constructional Steel, Vol.21, pp.181-184, 2013.
- H. Hayashi S. Kainuma Y. Yamamoto Y. Itoh : Effect of Corrosion Product on Measuring Thickness
Accuracy of Rust Layer Formed on Steel Plate by Electro-Magnetic Thickness Tester, Journal of
Constructional Steel, Vol.21, pp.862-868, 2013.
- M. Kinoshita, S. Kainuma, T. Yamagami and S. Tsukamoto : Corrosion Behavior of Steel Member
in Boundary With Concrete-Based Materials, Journal of Constructional Steel, Vol.21, pp.185-192,
2013.
- J. H. Ahn, S. Kainuma, I. T. Kim : Shear Failure Behaviors of A Web Panel With Local Corrosion
Depending on Web Boundary Conditions, Thin-Walled Structures, Vol.73, pp.302-317, 2013.
- S. Kainuma, J. H. Ahn, I. T. Kim : Corrosion pattern for Critical Shear Buckling Load of A Web
Panel With Local Corrosion Damage, Applied Mechanics and Materials, Vol.421, pp.778-783, 2013.
- J. H. Ahn, S. Kainuma and T. Imamura : Repair Method and Residual Bearing Strength Evaluation
of A Locally Corroded Plate Girder at Support, Engineering Failure Analysis, Vol.33, pp.398-418,
2013.
- J. H. Ahn, I. T. Kim, S. Kainuma and M. J. Lee : Residual Shear Strength of Steel Plate Girder due
10
to Web Local Corrosion, Journal of Constructional Steel Research, Vol.89, pp.198-212, 2013.
- J. H. Ahn, S. Kainuma and I. T. Kim : Shear Buckling Strengths and Post Buckling Behaviors of
Steel Webs With Local Corrosion, Journal of JSCE, Vo.1, pp.251-261, 2013.
- I. T. Kim, M. J. Lee, J. H. Ahn and S. Kainuma : Experimental Evaluation of Shear Buckling
Behaviors and Strength of Locally Corroded Web, Journal of Constructional Steel Research, Vol.83,
pp.75-89, 2013.
- Y. S. Jeong, S. Kainuma and J. H. Ahn: Structural Response of Orthotropic Bridge Deck Depending
on the Corroded Deck Surface, Construction & Building Materials, No.43, pp.87-97, 2013.
- S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Influences of
Mixing and Porosity Ratios of Porous Sintered Al-Zn Plate and Material Property of Fiber Sheet on
Anticorrosive Effects of Sacrificial Anode for Carbon Steel in Atmospheric Environment, Corrosion
Engineering, Vol. 62, No.8, pp.205-218, 2013.
- M. Fujii, M. Yamauchi, D. Uchida, H. Hirai and S. Kainuma: A Numerical Analysis Study on Fatigue
Damage Effected by the Remained Part of Lifting Piece on the Orthotropic Deck, Journal of
Constructional Steel, Vol.20, pp.557-564, 2012.
- H. Hayashi, S. Kainuma, Y. Yamamoto, N. Imamura: Evaluation for Micro-corrosive Environment
of Structural Members in a Deck Truss Bridge Exposed to Airborne Sea Salt, Journal of Constructional
Steel, Vol.20, pp.297-302, 2012.
- S. Kainuma, Y. Yamamoto, Y. Itoh, H. Hayashi and W. Oshikawa: Evaluation Method for Corrosion
Depth of Uncoated Carbon Steel and Its Time-Dependence Using Thickness of Corrosion Product
Layer, Corrosion Engineering, Vol. 61, No. 7, pp. 203-212, 2012.
- S. Kainuma, Y. S. Jeong, K. Utsunomiya and J. H. Ahn: Numerical Simulations for Time-dependent
Corrosion Surfaces of Unpainted Carbon Steel Plates in Atmospheric Corrosive Environments Using
Spatial Statistical Techniques, Corrosion Engineering, Vol. 61, No. 7, pp. 203-212, 2012.
- S. Kainuma, J. H. Ahn, Y. S. Jeong and H. Takahashi: Evaluation on Estimation in Characteristics of
Fatigue Crack Using Micro-Encapsulated Dye Mixing Paint, Engineering Failure Analysis, Vol.25,
pp.1-12, 2012.
- S. Inokuchi, S. Kainuma, D. Uchida and D. Shiro: Influence of Press Reforming in Fabrication
Process on Stress Properties of Welded Joint Between Deck Plate and U-shaped Rib in Orthotropic
Steel Decks, Journal of Constructional Steel, Vol.19, No.73, pp.1-8, March, 2012.
- S.Kainuma, Y.Yamamoto, Y. Itoh and W. Oshikawa: Prediction Method for Mean Corrosion Depth
of Uncoated Carbon Steel Plate Subjected to Rainfall Effect using Fe/Ag Galvanic Couple ACM-Type
Corrosion Sensor, Corrosion Engineering, 2011, Vol. 60, No. 11, pp. 415-423, November, 2011.
- K. Utsunomiya, S. Kainuma and Y. S. Jeong: Study on Evaluation for Initiation of Rust Spots on
Painted Steel Members Using Spatial Point Process, Journal of Constructional Steel, Vol.19, pp.607-
612, November, 2011.
11
- M. Fujii, D. Uchida, M. Yamauchi, S. Inokuchi and S. Kainuma: Analytical Study on Mounting
Accuracy Influence of Lifting Pieces on Stress Characteristics of U Rib Welded Joint on Orthotropic
Steel Deck, Journal of Constructional Steel, Vol.19, pp.69-76, November, 2011.
- N. Hosomi, S. Kainuma and Y. Kato: Analytical Study on Stress Concentration of Corroded
Orthotropic Steel Deck Plates, Journal of Constructional Steel, Vol.19, pp.613-616, November, 2011.
- Y. Kato, S. Kainuma, T. Yamagami and S. Tsukamoto: Fundamental study on tensile adhesive
strength Between corroded steel member and ceramic mortar material, Journal of Constructional Steel,
Vol.19, pp.581-584, November, 2011.
- S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida and A. Kaneko: Fundamental Study on Corrosion
Protection of Steel Components With a Sacrificial Anode using a Porous Sintered Plate and Fiber Sheet
in an Atmospheric Environment, Corrosion Engineering, 2011, Vol. 60, No. 12, pp. 444-451,
December, 2011.
- N. Hosomi And S. Kainuma: Evaluation of Stress Concentration Factor for Corroded Structural Steel
Members in Boundary With Concrete, Journal of Japanese Society of Civil Engineers, Vol.66, No.4,
pp.613-630, October, 2010.
- Y. Yamamoto, S. Kainuma, Y. Mukaigawa and Y. Itoh: Fundamental Study on Evaluation Method
for Corrosion Depth of Unpainted Weathering Steel Members using Rust Thickness, Journal of
Constructional Steel, Vol.18, pp.567-570, November, 2010.
- Y. Mukaigawa and S. Kainuma: Fundamental Study on Evaluation Method for Corrosion Surface of
Painted Steel Members, Journal of Constructional Steel, Vol.18, pp.547-550, November, 2010.
- Y. Kato, S. Kainuma and Y. Mukaigawa: Fundamental Study on Influence of Corrosive Environment
on Corrosion Surface of Steel Member, Journal of Constructional Steel, Vol.18, pp.603-608,
November, 2010.
- K. Utsunomiya, S. Kainuma, S. Ishihara and D. Uchida: Fundamental Study on Corrosion Protection
Method by Sacrificial Anode Applying to Steel Members in Atmospheric Corrosion Environment,
Journal of Constructional Steel, Vol.18, pp.543-546, November, 2010.
- Y. Itoh, T. Yamashita, S. Kainuma and Y. Mukaigawa: Applicability on an atmospheric corrosion
monitor (ACM) in carbon dioxide atmosphere, Journal of Constructional Steel,Vol.18, pp.543-546,
November, 2010.
- S. Ishihara, S. Kainuma, K. Utsunomiya and D. Uchida: Fundamental Study on Corrosion Protection
Effect by Sacrificial Anode Applying to Steel Members using a Porous Sintered Al-Zn Plate and
Chemical Fiber Sheet, Journal of Constructional Steel, Vol.18, pp.543-546, November, 2010.
- S. Kainuma, N. Hosomi, J. Gotoh and Y. Itoh: Fundamental Study on Evaluation for Time-dependent
Corrosion Behavior of Long Steel Members in Marine Environment, Journal of Japanese Society of
Civil Engineers, Vol.65, No.2, pp.440-453, May, 2009.
- S. Kainuma and N. Hosomi : Fatigue Life Evaluation of Corroded Structural Steel Members in
12
Boundary With Concrete, International Journal of Fracture, Vol.158, No.1, pp149-158, July, 2009.
- S. Kainuma, H. Katsuki and H. Takahashi: A Study on the Estimation of Surface Fatigue Crack
Length using Coating Material Containing Dye Microcapsules, Journal of The Japanese Society for
Non-Destruction Inspection, Vol.57, No.12, December, 2008.
- S. Kainuma And T. Mori: A Study on the Fatigue Crack Initiation Point of Load-Carrying Fillet
Welded Joints, International Journal of Fatigue, Vol.30, pp.1669-1677, June, 2008.
- S. Kainuma, S. Onoue, K. Miura, Susumu Inokuchi, A. Kawabata And D. Uchida: Development of
an Experimental System for Fatigue-Cracking from Weld Roots Between Deck Plate and U-Rib in
Orthotropic Steel Decks, Journal of Japanese Society of Civil Engineers, Vol.64, No.2, pp.297-302,
April, 2008.
- S. Kainuma And N. Hosomi: Numerical Simulation of Time-Dependent Corroded Surface of
Structural Steel Members in Boundary With Concrete, Journal of Japanese Society of Civil Engineers,
Vol.64, No.2, pp.333-349, April, 2008.
- S. Kainuma, H. Katsuki, I. Iwai, M. Kumagai and H. Shinichi: Fatigue Behavior of Friction Stir Butt-
Welded Joints Inclined to Applied Stress, Quarterly Journal of The Japan Welding Society, Vol.25,
No.1, pp.203-207, March, 2007.
- S. Kainuma, H. Katsuki, H. Takahashi and S. Hino: A Study on Estimation of Through- thickness
Fatigue Crack Length Using Coating Material Containing Dye Microcapsules, Journal of The Japanese
Society for Non-Destructive Inspection, Vol.56, No.9, pp.479-484, September, 2007.
- S.Kainuma and T.Mori: A Fatigue Strength Evaluation Method for Load-carrying Fillet Welded
Cruciform Joints, International Journal of Fatigue, Vol.28, Issue 8, pp.864-872, August, 2006.
- S. Kainuma, N. Hosomi, I. T. Kim and Y. Itoh: Time-dependent Corrosion Behavior of Structural
Steel Members in Boundary With Concrete, Structural Eng./Earthquake Eng., JSCE, No.780, I-70,
pp.97-114, January, 2005.
- S. Kainuma and I. T. Kim: Fatigue Strength Evaluation of Load- Carrying Fillet Welded Cruciform
Joints With Different Plate Thickness, International Journal of Fatigue, Vol.27, Issue 7, pp.810-816,
July, 2005.
- S. Kainuma, N. Hosomi and I. T. Kim: Effect of Weld Penetration on Fatigue Behavior of Welded
Corner Joints of Steel Structural Members, Steel Construction Engineering, Vol.12, No.15, pp.101-
110, March, 2005.
- I. T. Kim and S. Kainuma: Fatigue Life Assessment of Load-Carrying Fillet Welded Cruciform Joints
Inclined to Uniaxial Cyclic Loadings, International Journal of Pressure Vessel and Piping, Vol.82,
Issue 11, pp.807-813, November, 2005.
- S. Kainuma, N. Hosomi and I. T. Kim: Influence of Weld Penetration Depth on Fatigue Behavior of
Beam-to-column Connections in Steel Piers, Steel Construction Engineering, Vol.11, No.44, pp.1-13,
2004.
13
- S. Kainuma, Y. Kusumoto and N. Hosomi: Fatigue Behavior of Load-Carrying Fillet Welded
Cruciform Joints With Plates of Different Thickness, Quarterly Journal of The Japan Welding Society,
Vol.22, No.4, pp. 557-564, 2004.
- Y. Itoh, I. T. Kim, S. Kainuma and Y. Kadota: Corrosion Deterioration of Painted Steels With
Different Surface Preparations of Steel Substrates, Structural Eng./Earthquake Eng., JSCE, No.766/I-
68, pp.291-307, 2004.
- Y. Itoh, B. Liu, K. Usami, R. Kusama and S. Kainuma: Study on Strain Rate Effect and Performance
Examination of Steel Bridges Guard Fences Subjected to Vehicle Collision, Structural
Eng./Earthquake Eng., JSCE, No.759/I-67, pp.337-353, 2004.
- S. Kainuma, R. Nakane and N. Hosomi: Weld Residual Stress and Fatigue Strength of Flanged Edge
Welded Joints in Ferritic Stainless Steel, Quarterly Journal of The Japan Welding Society, Vol.22, No.1,
pp.117-125, 2004.
- Y. Itoh, I. T. Kim, H. Ohta and S. Kainuma: Preliminary Accelerated Exposure Tests of Corrosion
Estimation for Steels, Journal of Structural Engineering, Vol.49A, pp.697-706, 2003.
- S. Kainuma, N. Hosomi, I. T. Kim, Y. Itoh and N.Kakinoki: Corrosion characteristic and Fatigue
behavior of out-of-plane gusset welded joints, Journal of Structural Engineering, Vol.49A, pp.707-715,
2003.
- S. Kainuma and Y. Yaginuma: Ultrasonic Measurements of Root Gap in Fillet Welded Cruciform
Joints by Surface Horizontally Polarized Shear Wave, Journal of The Japanese Society for Non-
Destructive Inspection, Vol.51, No.11, pp.733-739, 2002.
- Y. Itoh, A. Iwata and S. Kainuma: Accelerated Exposure Tests of Environmental Durability for Steels
and the Estimation of Accelerated Coefficient, Journal of Structural Engineering, Vol.48A, pp.1021-
1029, 2002.
- Y. Itoh, K. Usami, S. Kainuma and M. Sugie: Numerical Collision Analysis of Aluminum Alloy
Guard Fences, Journal of Structural Engineering, Vol.47A, pp.1707- 1717, 2001.
- I. T. Kim, K. Yamada and S. Kainuma: Fatigue Behavior of Butt Welded Joints Containing Inclined
Lack-of-Penetration, Structural Eng./Earthquake Eng., JSCE, No.675/I-55, pp.53-62, 2001.
- S. Kainuma, T. Mori and M. Chimiya: Evaluation Method for Fatigue Failure Modes in Load-
Carrying Fillet Welded Cruciform Joints, Structural Eng./Earthquake Eng., JSCE, No.668/I-54,
pp.313-318, 2001.
- S. Kainuma and D. Takamatsu: Fatigue Behavior of Fillet Welded Cruciform Joint under
Compressive Cyclic Stress, Journal of Constructional Steel, Vol.8, pp.723-730, November, 2000.
- S. Kainuma, Y. Kawamoto, D. Takamatsu and K. Yamada: Influence of Welding Position and Root
Gap on Fatigue Strength of Load-Carrying Fillet Welded Cruciform Joints, Structural Eng./Earthquake
Eng., JSCE, No.647/I-51, pp.435-445, 2000.
- K. Yamada, S. Kainuma, N. Kagawa, H. Ishii and T. Nishioka: Fatigue Tests of Web Gap Detail With
14
Semi-Circular Cut-Out in Plate Girder Bridge, Structural Eng./Earthquake Eng., JSCE, No.619/I-47,
pp.267-278, 1999.
- H. Ishii, Y. Horie, T. Niina, S. Kainuma and K. Yamada: Influence of Weld on Fatigue Strength of
Web Gap Detail, Journal of Structural Engineering, Vol.45A, pp.1183-1191, 1999.
- S. Kainuma, K. Yamada and N. Kagawa: Improving Fatigue Life of Web Gap Plate in Plate Girder
With Semi-Circular Cut-Out, Journal of Constructional Steel, Vol.8, pp.435-442, November, 2000.
- T. Ojio, K. Yamada, S. Kainuma, T. Obata, T. Furuichi: Estimation of Traffic Loads using Strain
Recording in Orthotropic Steel Deck, Journal of Structural Engineering, Vol.44A, pp.1141-1151, 1998.
- K. Yamada, S. Kainuma, M. Suzuki, A. Kondo: Fatigue of In-Plate Gusset With Static Load in Main
Plate, Journal of Structural Engineering, Vol.44A, pp.1073-1082, 1998.
- S. Kainuma, T. Mori and M. Ichimiya: Propagation Behavior of Fatigue Crack Originated from the
Weld Root of Fillet Welded Cruciform Joints, Steel Construction Engineering, Vol.4, No.14, pp.1-8,
1997.
- S. Kainuma, K. Yamada, T. Nishioka, I. Nakamura and H. Ishii: Improvement Method of Fatigue
Strength of Web Gap Plate by Semi-Circular Cut-Out, Journal of Structural Engineering, Vol.43A,
pp.1025-1032, 1997.
- S. Kainuma, K. Yamada, Y. Johsen, M. Iwasaki and T. Nishikawa: Test and Analysis of Influence of
Cracked Ribs on Orthotropic Steel Deck, Journal of Structural Engineering, Vol.42A, pp.927-936,
1996.
- S. Kainuma and T. Mori: Fatigue Strength Evaluation Method for Load-Carrying Fillet Welded
Cruciform Joints, Structural Eng./Earthquake Eng., JSCE, No.501/I-29, pp.95-102, 1994.
- S. Kainuma and T. Mori: Fatigue Strength Analysis of Load-Carrying Fillet Welded Cruciform Joints,
Journal of Structural Engineering, Vol.39A, pp.937-946, April, 1993.
Proceedings of International Conference/-1996
- S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi and T. Asano : Surface Observation of Laser-Treated
Carbon Steel and Application of Laser Cleaning for Corroded Steel Member, 2021 International Civil
Engineering and Architecture Conference, Singapore, 2021.
- Y. Gao, S. Kainuma, M. Yang, S. Ishihara, M. Hashimoto and D. Inoue : Corrosion Behavior of Hot-
Dip Al Coating Contact with Concrete During Hardening Process of Concrete, 2021 International Civil
Engineering and Architecture Conference, Singapore, 2021.
- H. Yang, S.Kainuma, M. Yang, K. Muto and T. Asano : Fundamental Study on Weather Resistance
of Overlapping Layers Between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating,
2021 International Civil Engineering and Architecture Conference, Singapore, 2021.
- S. Kainuma, S. Zhuang, M. Yang1, K. Toyosawa and T. Asano : Investigation of Corrosion Resistance
and Mechanical Properties of Laser-Treated Carbon Steel, 7th International Conference Integrity-
15
Reliability-Failure, Funchal, Portogal, 2020.
- S. Kainuma, M. Yang, H. Yang, K. Muto and H. Miyata : Deterioration and Anti-Corrosion Behaviors
of Overlapped Layer between Al-5mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating
in Highly Corrosive Atmospheric Environment, 17th International Conference on Fracture and
Damage Mechanics, Mallorca, Spain, 2020.
AIP Conference Proceedings, Vol.2309, 020048-1–020048-8, 2020.
- M. Dote, M. Yang, S. Kainuma, Y. Kuwahara, K. Yamashita and N. Kai : Initial Corrosion Behavior
of Spheroidal Graphite Cast Iron and Rust Evaluation in Atmospheric Environment, Corrosion &
Prevention 2020, Australia, Perth, 2020.
- M. Yang, S. Kainuma and H.X. Yang : Corrosion Resistance and Deterioration Behavior of
Overlapping Layer Between Thermal Spray Coating and Heavy-Duty Coating, Corrosion &
Prevention 2020, Australia, Perth, 2020.
- M. Yang, S. Kainuma, W. Xu : Experimental Study on The Fatigue Fracture Mechanism of Finger
Type Expansion Joint, Pacific Structural Steel Conference, Tokyo, Japan, 2019.
- A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Blasting Conditions on Characteristics of Steel
Surface and Residual Abrasive Material, Pacific Structural Steel Conference, Tokyo, Japan, 2019.
- M. Yang, S. Kainuma, X. Sun : Electrochemical Evaluation on Corrosion Rate of Common Steel
Near The Air-Liquid Interface Using An Immersion Sensor, East Asia & Pacific Area Conference &
Expo, Yokohama, Japan, 2019.
- S. Zhuang, S. Kainuma, M. Yang, K. Okuda, M. Fukuda : Evaluation of Electrochemical Properties
of Laser-Cleaned Carbon Steel Plate, East Asia & Pacific Area Conference & Expo, Yokohama, Japan,
2019.
- Y. Gao, M. Yang, S. Kainuma, S. Ishihara, M. Hshimoto : Electrochemical Properties of Hot-dip Al
and Al-45Zn Coating, East Asia & Pacific Area Conference & Expo, NACE, Yokohama, Japan, 2019. - A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Repeated Cyclic Using of Blast Abrasive Material
on The Steel Surface Characteristics, The 2019 World Congress on Advances in Structural Engineering
and Mechanics, Jeju, Korea, 2019.
- S. Kainuma, M. Yang, Y.S. Jeong : Stress Behaviors for Corroded Surface of Fatigue-Cracked
Orthotropic Steel Deck, 3rd International Conference on Structural Integrity and Durability,
Dubrovnik, Croatia, 2019.
- M. Yang, S. Kainuma, T. Tomoda, K. Minami : Study on Anti-Corrosive Method With Sacrificial
Anode for Embedded Steel Members using Water Swelling Rubber, 9th International Symposium
on Steel Structures, Jeju, Korea, 2017.
- S. Kainuma, J. Du, M. Yang, K. Muto, H. Miyata : Deterioration Behaviors of Overlapping Layers
Between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating, 16th International
Conference on Fracture and Damage Mechanics, Key Engineering Materials, Florence, Italy, 2017.
16
- S. Kainuma, Y. Yamamoto, Y.S. Jeong : Practical Method for Estimating Time-Dependent
Corrosion Depth of Uncoated Carbon Steel Plate Under Atmospheric Environment Using Fe/Ag
Galvanic Couple ACM-Type Corrosion Sensor, 15th International Conference on Fracture and
Damage Mechanics, Alicante, Spain, Key Engineering Materials, Vol.713, pp.187-191, Alicante,
Spain, 2016.
- M. Yang, S. Kainuma, Y.S. Jeong, S. Inokuchi, A. Kawabata, D. Uchida : Analytical Investigation
for Stress Response of Orthotropic Steel Deck With Through-Deck Cracks, 5th International
Symposium on Reliability Engineering and Risk Management, pp.445-448, Seoul, Korea, 2016.
- G. Mashimoto, S. Kainuma, Y. S. Jeong : Spatial Statistics Simulation of The Corrosion Behavior
of The Steel Members on Artificial Coating Defects, 5th International Symposium on Reliability
Engineering and Risk Management, pp.385-388, Seoul, Korea, 2016.
- J. Du, S. Kainuma, J. Kobayashi, Y.S. Jeong1, K. Muto, H. Miyata : Fundamental Study on Anti-
Corrosion Characteristics of Overlapping Layer Between Thermal Sprayed Al-5Mg Coating and
Heavy Duty Paint Coating, 5th International Symposium on Reliability Engineering and Risk
Management, pp.377-380, Seoul, Korea, 2016.
- R. Watanabe, S. Kainuma, Y. S. Jeong, J. Kobayashi, W. Oshikawa : Acceleration Coefficients of
Cyclic Corrosion Test With Respect to Atmospheric Exposure Test for Uncoated Steel Plates, 5th
International Symposium on Reliability Engineering and Risk Management, pp.381-384, Seoul, Korea,
2016.
- K. Yagi, S. Kainuma, M. Hirao : Effect of Heat Capacity on Corrosion Behaviors of Uncoated
Carbon Steel Under Various Atmospheric Environments Using Fe/Ag Galvanic Couple Corrosion
Monitoring Sensors, 5th International Symposium on Reliability Engineering and Risk Management,
pp.449-452, Seoul, Korea, 2016.
- M. Hirao, S. Kainuma1, Y.S. Jeong, J. Kobayashi, X.Guo, T. Shinohara: Influence of Commencing
Time of Exposure Test on Corrosion Behavior of Uncoated Common Steel and Weathering Steel,
5th International Symposium on Reliability Engineering and Risk Management, pp.457-460, Seoul,
Korea, 2016.
- S. Kainuma, Y. Tsuchihashi, Y.S. Jeong, S. Ishihara : Development of A Corrosion Monitoring
Sensor for Structural Steel Member in Boundary With The Ground, 17th International Conference
on Experimental Mechanics, CD-ROM, Rhodes, Greece, 2016.
- T. Sakamoto and S. Kainuma : Fundamental Research on Factors Affecting the Under-Film Corrosion
Behavior of Coated Steel Members, 18th International Conference on Chemistry and Chemical
Engineering, Amsterdam, Netherlands, 2016. (World Academy of Science, Engineering and
Technology, International Scholarly and Scientific Research & Innovation, Vol.10, No.2, pp.232-237,
2016.)
- M. Yang, S. Kainuma, Y.S. Jeong, A. Kawabata, S.Inokuchi and D.Uchida : Parametric FE Analysis
17
for Fatigue Behavior of Rib-to-Deck Welded Joints in Orthotropic Steel Decks, International
Association for Bridge and Structural Engineering Spring Conference, CD-ROM, Guangzhou, China ,
2016.
- S. Kainuma, Y. S. Jeong and J. Kobayashi : Influence of Size and Proximity of Paint Coating Defects
on Corrosion Behavior of Carbon Steel Plates, 14th International Conference on Fracture and Damage
Mechanics, CD-ROM, Budva, Montenegro, 2015.
- Y. S. Jeong, S. Kainuma and T. Imamura : Corrosivity Evaluation for Each Structural Part of Steel
Deck Truss Bridge Before and After Dam Construction, 2015 World Congress on Advances in
Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
- M. Michino, S. Kainuma, Y. Yamamoto, Y. S. Jeong, Y. Fujioka, A. Warashina, S. Takagi and M.
Uchino : Investigation for Corrosion Characteristic of Structural Members on Unpainted Weathering
Steel Bridge, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM,
Inchon, South Korea, 2015.
- J. Kobayashi, S. Kainuma and Y. S. Jeong : Investigation on Correlation and Acceleration
Coefficients of Accelerated Corrosion Tests to Atmospheric Exposure Tests, 2015 World Congress on
Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
- Y. Tsuchihashi, S.Kainuma, Y. S. Jeong, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi :
Corrosion Protection Effect With Scrificial Anode for Corroded Stel Members Using Al-Zn Alloy
Casting Materials and Fiber Sheet, 2015 World Congress on Advances in Structural Engineering and
Mechanics, CD-ROM, Inchon, South Korea, 2015.
- S. Kainuma, Y.S. Jeong and J. Kobayashi : Influence of Size and Proximity of Paint Coating Defects
on Corrosion Behavior of Carbon Steel Plates, 14th International Conference on Fracture and Damage
Mechanics, Budva, Montenegro, Key Engineering Materials, Vols. 577-578, pp.201-204, 2014.
- S. Ishihara, S. Kainuma, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Corrosion
Protection of Steel Members With a Porous Sintered Al-Zn Plate and Fiber Sheet under the
Atmospheric Environment, 19th International Corrosion Congress, CD-ROM, Jeju, Korea, 2014.
- Y. S. Jeong, S. Kainuma and S. Tsukamoto : Assessment on Deformable Behaviors of The
Orthotropic Steel Deck Stiffened by Bulb Rib Depending on Corrosion Damage, 7th International
Conference on Thin-Walled Structures, CD-ROM, Soul, Korea, 2014.
- S. Kainuma, Y. S. Jeong, N. Yagi and D. Uchida : Fatigue Behavior of Out-of-plane Gusset Welded
Joints With One Side Fillet Weld, Sixth International Conference on Engineering Failure Analysis,
CD-ROM, Lisbon, Portugal, 2014.
- S. Kainuma, Y. Yamamoto and Y. Itoh : Practical Method for Estimating Corrosion Depth of
Uncoated Carbon Steel Using Thickness of the Corrosion-product Layer, 12th International
Conference on Fracture and Damage Mechanics, Sardina, Italy, Key Engineering Materials, Vol.577-
578, pp.201-204, 2013.
18
- M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai : Influence of Remaining Lifting Piece on Fatigue
Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM,
Sakuramento, USA, 2013.
- J.H. Ahn, S. Kainum, I.T. Kim and Y.S. Jeong : Assessment of Shear Behaviors of a Web Panel With
Free lower boundary, 2013 AMEE Workshop on Civil Engineering and Materials Science, CD-ROM,
Hong Kong, China, Advanced Materials Research Vol.684, pp.116-119, 2013.
- Y.S. Jeong, S. Kainuma and J.H. Ahn : Investigation on Corroded Figuration of Weathering and
Carbon Steel Using Spatial Statistics, 2013 AMEE Workshop on Civil Engineering and Materials
Science, CD-ROM, Hong Kong, China, Advanced Materials Research Vol.684, pp 120-124, 2013.
- S. Kainuma, J.H. Ahn, Y.S. Jeong and H. Takahashi: Examination of fatigue crack detection using
micro-encapsulated dye mixing paint, 1st International Conference of Advances in Structural Health
Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
- Y.S. Jeong, S. Kainuma and J.H. Ahn: Stress Concentration Factor of Time-Dependent Corroded
Surfaces for uncoated Carbon Steel Plates, 1st International Conference of Advances in Structural
Health Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
- M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai: Influence of Remaining Lifting Piece on Fatigue
Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM,
USA, 2012.
- S. Kainuma, J. H. Ahn,Y.S. Jeong,H. Sugiyama, A. Tabata and M. Iwasaki: Structural Behaviors
of the Fatigue-Cracked Orthotropic Steel Bridge Deck With Bulb Ribs, Fifth International Conference
on Engineering Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
- Y.S. Jeong,S. Kainuma and J.H. Ahn: Numerical Evaluation of Time-Dependent Corroded Steel
Surface Under Various Atmospheric Environments, Fifth International Conference on Engineering
Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
- Y. Itoh and S. Kainuma: Evaluation of Atmospheric Environment and Time-Dependent Corrosion
Depth for Unpainted Carbon Steel Using Zn/Ag ACM Corrosion Sensor, Proceedings of 18th
International Corrosion Congress, CD-ROM, Perth, Australia, November, 2011.
- Y. Itoh and S.Kainuma : Applicability of an ACM type corrosion sensor to evaluations of corrosive
environments in gas piping, Proceedings of The European Corrosion Congress, EUROCORR 2011,
CD-ROM, Stockholm, Sweden, September, 2011.
- S. Kainuma and Y. S. Jeong: Spatial Statistical Analyses for Time-dependent Corroded Surfaces of
Uncoated Weathering Steel Plates in Various Corrosive Environments, Proceedings of 8th
International Conference on Fracture and Damage Mechanics, CD-ROM, Dubrovnik, Croatia,
September, 2011.
- S. Kainuma, Y. Mukaigawa, Y. Itoh, Y. Jeong and I. T. Kim: Spatial Statistical Simulation for Time-
dependent Corroded Surfaces of Carbon Steel Plates in Various Corrosive Environments, Proceedings
19
of 4th International Conference on Structural Engineering, Mechanics and Computation, CD-ROM,
Cape Town, South Africa, September, 2010.
- S. Kainuma, K. Sugitani, Y. Itoh And I. T. Kim: Evaluation Method for Time-Dependent Corrosion
Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th
International Conference on Fracture and Damage Mechanics, Advances in Fracture and Damage
Mechanics VIII,pp.417-420, Malta, September, 2009.
- H. Matsushita, S. Inokuchi, D. Uchida, A. Kawabata and S. Kainuma: Development of the
Experimental Method for Fatigue Cracks on Weld Roots Between Deck Plates and U-Shaped Ribs in
Orthotropic Steel Decks, Proceedings of 8th Japanese-German Bridge Symposium, CD-ROM,
Germany, August, 2009.
- S. Kainuma, K. Sugitani, Y. Itoh and I. T. Kim: Evaluation Method for Time-Dependent Corrosion
Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th
International Conference on Fracture and Damage Mechanics, May, 2009.
- S. Inokucchi, S. Kainuma, A. Kawabata and D. Uchida: Field Measurement and Development of an
Experimental System for Fatigue-Cracking from Weld Roots Between Deck Plate and U-rib in
Orthotropic Steel Decks, Proceedings of 2008 International Orthotropic Bridge Conference, August,
2008.
- I. T. Kim, S. Kainuma and N. Hosomi: Corrosion and fatigue behaviors of steel plates in boundary
With concrete, Proceedings of 4th Structural Engineering and Construction Conference, CD-ROM,
Melbourne, Australia, September, 2007.
- S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in
Boundary With Concrete, Proceedings of 6th International Conference on Fracture and Damage
Mechanics, July, 2007.
- S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in
Boundary With Concrete, Proceedings of 6th International Conference on Fracture and Damage
Mechanics, Advances in Fracture and Damage Mechanics VI, pp.245-258, Madeira, Portugal, July,
2007.
- S. Kainuma, N. Hosomi and S. Hino: Numerical Simulation of the Time-Dependent Corroded
Surface of Structural Steel Members in Boundary With Concrete, Proceedings of International
Conference on Structural Condition Monitoring and Damage Identification, CD-ROM, Perth,
Australia, December, 2005.
- I. T. Kim, Y. Itoh, Y. Kadota, S. Kainuma: Corrosion Characteristic of Painted Steels With Different
Surface Preparation, Proceedings of the 7rd Korea-Japan Joint Seminar Steel Bridge, pp.237-244,
August, 2003.
- S. Kainuma, N. Hoshomi, I. T. Kim and Itoh: Fatigue Behavior of Corroded Out-of-plane Gusset
Welded Joints, Proceedings of the Second International Conference on Advances in Structural
20
Engineering and Mechanics, CD-ROM, August, 2002.
- Y. Itoh, A. Yazawa, T. Kitagawa, S. Kainuma, Y. Yamamoto and Y. Kutsuna: Study on Environmental
Durability of Rubber Bearing for Bridges, Proceedings of IABSE Symposium Melbourne, pp.1-7,
January, 2002.
- Y. Itoh, A. Iwata, S. Kainuma, K. Kadota and T. Kitagawa: Accelerated Exposure Tests of Durability
for Steel Bridges, Proceedings of the Eighth East Asia-Pacific Conference on Structural Engineering
and Construction, CD-ROM, December, 2001.
- Y. Itoh, K. Usami, R. Kusama, and S. Kainuma: Numerical Analyses of Steel and Aluminum Alloy
Bridge Guard Fences, Proceedings of the Eighth East Asia-Pacific Conference on Structural
Engineering and Construction, CD-ROM, December, 2001.
- S. Kainuma, T. Mori and Y. Itoh, Numerical Analysis on Fatigue Failure Modes in Load- carrying
Fillet Welded Cruciform Joints, Proceedings of the First International Structural Engineering and
Construction Conference, pp.863-867 , January, 2001.
- S. Kainuma, K. Yamada, N. Kagawa, H. Ishii and T. Nishioka: Fatigue Tests of Web Gap Plate With
Semi-Circular Cut-Out in Plate Girder Bridge, Proceedings of the 5th Korea-Japan Joint Seminar on
Steel Bridge, pp. 445-455, October, 1999.
- I. T. Kim, K. Yamada, S. Kainuma and K. Itoh: Fatigue Test of Tensile Plates With Inclined Fillet
Welded Ribs, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp.313-320, October,
1999.
- T. Ojio, H. Shinkai, K. Yamada and S. Kainuma: Recent Development of Bridge Weigh-In- Motion
Systems, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp. 257-268, Octorber,
1999.
- S. Kainuma, Y. Kawamoto, D. Takamatsu and K. Yamada: Fatigue Tests of Load-Carrying Fillet
Welded Cruciform Joints With Root Gap, Proceedings of the Seventh East Asia-Pacific Conference
on Structural Engineering and Construction, pp. 213-218,August, 1999.
- T. Mori and S. Kainuma: A study on Fatigue Crack Initiation Points in Load- Carrying Type of
Cruciform Fillet Welded Joints, Proceedings of the Seventh East Asia-Pacific Conference on Structural
Engineering and Construction, pp. 219-224, August, 1999.
- K. Yamada, S. Kato, A. Okabe, S. Kainuma and T. Ojio: Fatigue Behavior of Tensile Plates With
Inclined Fillet Welded Ribs, Proceedings of the Seventh East Asia-Pacific Conference on Structural
Engineering and Construction, pp. 225-230, August, 1999.
- N. Kagawa, K. Yamada, S. Kainuma and T. Nakamura: Fatigue Behavior of Improved Welded Cover
Plate Detail, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and
Construction, pp. 171-176, August, 1999.
- S. Kainuma, K. Yamada, N. Kagawa, T. Nishioka and H. Ishii: Improving Method of Fatigue Life of
Web Gap Plate by Semi-Circular Cut-Out, Proceedings of the Sixth East Asia-Pacific Conference on
21
Structural Engineering and Construction, pp.1713-1718, January, 1998.
- K. Yamada, S. Kainuma, M. Suzuki and A. Kondo: Fatigue Tests of Gusset-Welded Specimens With
Side Static Load, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering
and Construction, pp.1719-1724, January, 1998.
- K. Yamada, N. Okado, Q. Cao and S. Kainuma: Fatigue Crack Growth Behavior of Structural Steel
after Periodic Overload and Variable Amplitude Block Loading, Proceedings of the Sixth East Asia-
Pacific Conference on Structural Engineering and Construction, pp. 1761-1766, January,1998.
- T. Ojio, K. Yamada, S. Kainuma and T. Obata: Measurement of Wheel Loads Using Orthotropic Steel
Deck, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and
Construction, pp. 411-416, January,1998.
- K. Yamada, T. Ojio, S. Kainuma and T. Obata: Stress Measurement and Repair of a Fatigue Cracked
Box Girder Bridge, Proceedings of IABSE Workshop Lausanne, pp.149-157, March, 1997.
- S. Kainuma, K. Amada, N. Kagawa, T. Nishioka and H. Ishii: Improving Effect on Fatigue Strength
of Web Gap Plate by Semi-circular Cut-out, Proceedings of Asian-Pacific Symposium on Bridge and
Fatigue, pp.71-78, December, 1996.
- K. Yamada, S. Kainuma and T. Ojio: Stress Measurements of Orthotropic Steel Deck of A Box Girder
Bridge, Proceedings of Asian-Pacific Symposium on Bridge and Fatigue, pp.55-60, December, 1996.
- K. Yamada, S. Kainuma and H. Tanaka: Some Practical Aspects of Fatigue Analysis Using Fracture
Mechanics, Proceedings of International Conference on Urban Engineering in Asian Cities in the 21st
Century, November, 1996.
- K. Yamada and S. Kainuma: Practical Aspects of Fracture Mechanics Applied to Fatigue,
Proceedings of the Fourth International Symposium on Structural Engineering for Young Experts,
Vol.1, pp.1-13, November, 1996.
- K. Yamada, A. Kondo, S. Kainuma, H. Tanaka and N. Okado: Fatigue Behavior of In-Plane Side
Gusset Subjected to Biaxial Loads, Proceedings of the 3rd Korea-Japan Joint Seminar Steel Bridge,
pp.217-219, October, 1994.
Awards
- Paper Award (Tanaka Award) from Japan Society of Civil Engineers for a study on “Fundamental
Study on Corrosion Resistance and Anti-Corrosion of Interface Between Al-5mg Thermal Sprayed
Coating and Heavy Duty Paint Coating”, 2019.6.
- Award for Technical Development from Japan Society of Civil Engineering for a technical
development on “Anti-corrosive Method with Sacrificial Anode for Steel Members using Al-Zn
Alloy Casting Plate and Fiber Sheet in Atmospheric Environment”, 2018.5.
- Paper Award (Tanaka Award) from Japan Society of Civil Engineers for a study on “Time-Dependent
Corrosion Behavior of Structural Steel Members in Boundary with Concrete”, 2006.5.
22
Membership
Japan Society for Civil Engineers (JSCE)
Japanese Society of Steel Construction (JSSC)
Japan Society of Corrosion Engineering (JSCE)
Japan Association of Corrosion Control (JACC)
The Surface Finishing Society of Japan (SFSJ)
Lecture Course
Structural Mechanics
Steel Structural Engineering
Durability Design for Steel Structure
Advanced of Steel Structures
Maintenance Engineering