shiftworks products are made in the · pdf fileinstallation kit when swapping out a powerglide...
TRANSCRIPT
Shiftworks® products are made in the USA
2 www.shiftworks.com
NEW PRODUCTS
Neutral Safety & Back-up Switch Re-Location Conversion 3-speed and 4-speed Automatics1969-81 Pontiacs and 1973-81 Chevy’s
Does your shifter look like this? GM used a rod linkage from the transmission to operate the neutral safety and back-up switch located on the column for many of its center console equipped cars. Headers and OverDrives and many owners have in many cases lost or caused to be lost this valuable safety item. We know, we got the calls.
So finally here is a solution. You can now put it on the shifter where it belongs.
For all TH350 and TH400 Use Column switch for 1968 Firebird.#SW652 $49.50 Switch not included.
For all OverDrive applications using SHIFTWORKS® shifter conversion #SW653 $94.50 Switch IS included.
y
?
3www.shiftworks.com
Dust Boots for SHIFTWORKS® Trans-stormer Shifter.These boots will help keep dust and dirt away from the shifter and out of your car. Available for both the 67 Camaro style and the Universal shifter bodies.
Molded ABS Plastic. Universal on Left and 67 Camaro style on Right.#SW280-155 Universal Body $24.50#SW280-251 Camaro Body $24.50
4L60E, 4L65E, 4L70E & 4L80EOur 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup light switch located on the exterior of the transmission and for cable applications straighten out the cable alignment if the transmission has the long Range-Select lever.
4LE Rod Linkage fix-it $18.504LE-C Cable fix-it kit $18.50Use with the non-E overdrive conversion for your car.
4LE Rod Linkage fix-it 4LE-C Cable fix-it kit
www.shiftworks.com4
#S500#S502
#SC2031-CAs Installed
#SC2042-CAs Installed
1964-67 CHEVELLE
Powerglide Shifter Conversion KitThe purpose of this kit is to allow the use of the 1964-67 factory installed console shifter when the Powerglide
transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive
(TH700-R4, 4L60 or TH200-4R) transmission.
This kit eliminates the rod linkage and replaces it our cable #K100. Kit includes cable.
1964-65 CHEVELLE#SC2031-C TH350, TH400 $175.00#SC2041-C TH700-R4, TH200-4R, or 4L60 $175.00
1966-67 CHEVELLE#SC2032-C TH350, TH400 $175.00#SC2042-C TH700-R4, TH200-4R, or 4L60 $175.00
1964-67 CHEVELLE#S500* 1965-67 Backup and Safety Switch $52.50*Recommended for all conversions.
#S502 1966-67 Console Lens Bezel $75.00
#4160 Button $12.50#S501 Button Spring $4.50#S530 TH350 Kickdown Cable $44.50#S531 TH350 Kickdown Bracket (Small Block) $12.50
1964-67 POWERGLIDE PARTS#SW421 Rod Linkage $41.00#SW419 Trans. Select Lever $42.00
Powerglide ShifThe purpose of this kfactory installed cons
transmission is re(TH350
and replaces it our ca
5www.shiftworks.com
Powerglide Shifter Conversion KitThe purpose of this kit is to allow the use of the 1964 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable.
1964 IMPALA#SC2051-C TH350, TH400 $175.00#SC2061-C TH700-R4, TH200-4R, or 4L60 $175.00
#S500* Back-Up & Safety Switch $52.50*Recommended for all conversions.
#S530 TH350 Kickdown Cable $44.50#S531 Kickdown Bracket (Small Block) $12.50#4160 Button $12.50#S501 Button Spring $4.50
#S530 #S531
#SC2051-C
#SC2061-C
#S501
1964 IMPALA
#S500
#4160
6 www.shiftworks.com
Powerglide Shifter Conversion KitUse your factory-installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60) transmission. This kit retains the rod linkage.
Rod Linkage#SW423 65-67 Impala PG & TH350 $42.00#SW425 65-67 Impala TH400 $58.00#SW427 65-67 Nova $41.00#SW431 65-67 Nova (O.D.) $41.00#SW404 Swivel Kit $9.50
#S1042
#2441 #2592
#SW425 pictured
As Installed
1965-67 NOVA & IMPALA
#S1031 As Installed
1965-67 NOVA#S1031 TH350, TH400 $57.75#S1041 TH700-R4, TH200-4R, or 4L60 $57.75#4160 Shifter Release Button $12.50#S501 Release/Spring Button $4.50
1965 IMPALA#S103 TH350, TH400 $47.25#2441 3-Speed Lens $49.50#S1043 TH700-R4, TH200-4R, or 4L60 $57.75
1966-67 IMPALA#S103 TH350, TH400 $47.25#2592 3-Speed Lens $39.50#S1042 TH700-R4, TH200-4R, or 4L60 $57.75
1965-67 NEUTRAL SAFETY AND BACK-UP SWITCH#S500* $52.50*Recommended for all conversions.
7www.shiftworks.com
1967 CAMARO & FIREBIRD, 1968-72 NOVA
Shifter Conversion KitThe purpose of this kit is to allow the use of the factory installed automatic floor shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4 or TH200-4R) transmission. This kit retains the rod linkage.
#S105A TH350, TH400 $57.75#S105B TH200-4R, TH700-R4, 4L60 $57.75#SW429 67 Rod Linkage with swivel $41.00#SW404 Swivel Kit $9.50#S530 TH350 Kickdown Cable $22.50#S531 Kickdown Bracket (Small Block) $12.50#6724 Shifter Release Button $12.50#S501 Release Button Spring $4.50#S504 Plastic (Delrin) Bushings $12.75#S636 Flexi-Rod (inside handle) $68.50#S635 NSS & Back-up Light Lever $15.25#SW442 Bottom Spring $4.50#SW443 Bottom Spring (cotter pin style) $4.50#SW441 Main Shaft Washers $6.50#SW435 1968-72 Nova TH Rod Linkage $63.50#S519 Neutral Safety/Back-up Switch $38.50
#S105A
#S635 #S504
#S636
#S519#SW435
8 www.shiftworks.com
3-Speed InstallationsAll 1968-72 factory “Horseshoe” style shifters have a universal detent for both 2-speed and 3-speed automatic transmissions. They also use the same cable. However, these models do require a cable
installation kit when swapping out a Powerglide transmission for a TH350 or TH400, or when
installing a factory console shifter in car originally equipped as a column shift.
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO
#C351
#C401
#C3511
#S640
See Cables
#S#S646400
NEW!! 3-Speed DetentGood for replacing a worn or damaged unitand for Reverse Valve Bodies too.
#S640 3-Speed Detent $30.00#S150 68-69 Camaro RVB Lens $19.50#S151 68-70 Chevelle RVB Lens $19.50#S152 71-72 Chevelle RVB Lens $19.50
1968-72 CAMARO, CHEVELLE, IMPALA, & MONTE CARLOUniversal Kit (All Models)#C351 TH350, TH400 $35.00
1968 CHEVELLE,1968-69 CAMARO#C401 TH400 GM Factory Parts $45.00#C354 TH350 $42.00
1969-72 CHEVELLE, 1970-72 CAMARO, 1968-72 IMPALA#C3511 TH350, TH400 $40.00#C402 TH400 GM Factory Parts $45.00#4582 1968-70 3-speed Lens $15.75#4584 1971-72 3-speed Lens $15.75#S530 TH350 Kickdown Cable $22.50#S531 TH350 Kickdown Bracket $12.50 (Small Block)
9www.shiftworks.com
4-Speed Overdrive Kit
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO
#SC2244
#DT3 #DT4
#SC2243
#C100
#K100
68-69 70-72As Installed – Camaro
RVB Lens#S151
3-Speed Ratchet Shift DetentA new Thomson Performance product. This detent will enable positive shifts from low to drive.#DT3 Powerglide, TH350, TH400 $75.00#DT4* GM Overdrives $75.00DT4 MUST be used with a SHIFTWORKS® overdrive conversion kit series SC224X.
CABLES#C100 Shifter Cable
(GM #3956765) $100.00#K100 Shifter Cable $74.50
#S532 Retainer $4.50 (clips cable to shifter handle)
1968-69 CAMARO#SC2244 TH700-R4,
TH200-4R, 4L60 $89.25
1970-72 CAMARO#SC2245 TH700-R4,
TH200-4R, 4L60 $89.25
1968-72 IMPALA (No Lens)#SC2240 TH700-R4,
TH200-4R, 4L60 $78.75
1968 CHEVELLE#SC2241 TH700-R4,
TH200-4R, 4L60 $89.25
1969-70 CHEVELLE#SC2242 TH700-R4,
TH200-4R, 4L60 $89.25
1971-72 CHEVELLE#SC2243 TH700-R4,
TH200-4R, 4L60 $89.25
See our video on cables:www.shiftworks.com/video/cable.htm
10 www.shiftworks.com
1968-81 FIREBIRD, GTO, & LE MANS, 1973-81 CAMARO
4-Speed Overdrive KitThe purpose of this kit is to allow the use of the factory installed shifter when installing a newer overdrive transmission. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable.
3-Speed Installations The 1968-69 Firebird Powerglide (2-speed) shifter can be used with the TH350 or TH400 (3-speed) transmission without modification. The only difference in the factory shifter detent is an additional hard stop for 2nd gear, not present with the 2-speed detent. This stop is unnecessary.
#C352 1968-69 Firebird TH350 $36.75#C353 1968-69 Firebird TH400 $36.75#C101 Shifter Cable (GM #498467) $114.75#C101 Shifter Cable (GM #498467) $74.50#K100 Shifter Cable $74.50
#C352
As Installed
1968-1969 FIREBIRD & GTO
#SC2262
1973-78 CAMARO#SC2261 TH700-R4, TH200-4R, or 4L60 $89.25
1968 FIREBIRD#2262-8 TH700-R4, TH200-4R, or 4L60 $89.25
1979-81 CAMARO, 1969-81 FIREBIRD, 1968-75 GTO & LE MANS#SC2262 TH700-R4, TH200-4R, or 4L60 $89.25
#C101 Shifter Cable (GM #498467) $114.75#K100 Shifter Cable $74.50
As Installed73-78 Camaro
1968-81 FIREBIRD, GTO, & LE MANS,
11www.shiftworks.com
Shifter Conversion KitThe purpose of this kit is to allow the use of the factory installed automatic shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60, or TH200-4R) transmission. The kit retains the rod linkage.
#SC2405 1965-67 $84.50
A new laser cut, die stamped aluminum console insert with black anodized letters for the above kit.
#S141 Console Insert (TH350/400) $44.50#S142 Console Insert (Overdrive) $44.50
#SC2405#S141 #S142
Shifter Conversion KitThis kit enables the use of the factory installed shifter when installing a newer overdrive transmission, such as the TH200-4R, TH700-R4, and the 4L60. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original
cable. Also included is an overdrive console lens adapter.
#SC2401 1968-71 $94.50 #SC2402 1972-76 $94.50
#SC2403 1977-81 $94.50
GM Cables #C103 1968-76 $90.00 #C102 1977-81 $120.00
Lens Indicator AdaptersL to R: 68-71, 72-76, 77-81
1965-67 CORVETTE
1968-81 CORVETTE
12 www.shiftworks.com
#SC2152
1964-65 GTO & LE MANS
As Installed
#SC2101
This kit allows the use of the factory 2-speed shifter when converting to a fully functional
3-speed shifter with installation of a new TH350, TH400, TH200-4R, TH700-R4, or 4L60 transmission. Kits require use of our cable #K100. (sold separately).
#SC2101 TH350 $104.00
#SC2102 TH400 $104.00
#SC2121 TH700-R4, TH200-4R, or 4L60 $104.00
#K100 Shifter Cable $74.50
1966-67 GTO & LE MANS
This kit shifter w
3
#SC2101
#SC2102
1966-67 GTO1966 67 GTO
Use your factory-installed 2-speed shifter to retain the original appearance when replacing the Powerglide transmission with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the rod linkage and replaces it with a cable. Kits include new cable.
#SC2152 TH350 & TH400 $175.00#SC2162 TH700-R4, TH200-4R or 4L60 $175.00
tory-Use your factwhenappearance w350 3-speed (TH3tran4R, or 4L60) ith areplaces it w
13www.shiftworks.com
#C371
Use the original His & Hers Shifter with a new 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. Kits include all necessary hardware for installation.
1967-68 GTO#C362 TH400 $36.75#C363 TH350 $36.75#C361 TH700-R4, TH200-4R, or 4L60 $42.00#C101 Shifter Cable (GM #498467) $114.75#K100 Shifter Cable $74.50
1970-72 442#C371 TH700-R4, TH200-R4, or 4L60 $110.00 (includes cable) #C361
w
DUAL GATE SHIFTERS
442
The overdrive conversion puts overdrive in a neutral position. Low, second, and drive are normally located.
14 www.shiftworks.com
Shifter Conversion KitUse your factory-installed automatic floor shifter with a newer 3-speed (TH350 or TH400) or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission.
#SC2312
#SC2322
#SC2302
Shifter CoUse your factonewer 3-speed(TH700-R4, TH
Shifter Conversion KitThe purpose of this kit is to allow the use of the factory shifter and console when the
2-speed transmission is replaced with a TH350 or TH400 3-speed or
a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the Rod Linkage and replaces it with a cable .
1965-66 CUTLASS#SC2320 TH350 & TH400 $135.00#SC2322 TH700-R4, TH200-4R or 4L60 $135.00
Shifter ConverThe purpose of this of the factory shifte
1964-66 CUTLASS
1967-72 CUTLASS
1967-69 CUTLASS#SC2302 TH350 & TH400 $150.00
1967-72 CUTLASS#SC2312 TH700-R4, TH200-4R, or 4L60 $150.00
15www.shiftworks.com
#SC2322
4-Speed Overdrive KitUse your factory-installed automatic floor shifter with a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, console lens indicator (68-69 only), new cable, all necessary hardware, and instructions.
1968-72 BUICK#SC2072 TH700-R4, TH200-4R, or 4L60 $150.00
4-Speed Overdrive KitUse your factory-installed automatic floor shifter with a newer 3-speed (TH350, TH400) or 4-speed (TH700-R-4, TH200-4R or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, new cable, all necessary hardware, and instructions.#SC2082 TH350, TH400 $150.00#SC2092 TH200-4R, TH700-R4 or 4L60 $150.00
1968-72 BUICK
1964-66 BUICK1964 66 BUICK
#SC2082 #SC2092
#SC2072
As Installed(’68-’69)
Kittomatic floor shifter with aa aaaa
TH200-4R, or 4L60)n includes a new laser proper stops and gearansmission shift lever, ns indicator (68-69 only),
dware, and instructions.
60 $150.00
16 www.shiftworks.com
COLUMN SHIFT CONVERSIONS
#KK02
Transmission Shift Arm Connection KitFor column shifters TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L80.
The Kugel Komponents Kit connects the column or floor shifter to most GM transmissions. It also allows for gear pointer alignment. A splined adapter button allows the arm to be positioned at any angle. A slot positions to pivot joint for longer or shorter sweep and pointer alignment.
The rod assembly is 17” – 23 1/2” pivot to pivot.
#KK02 Column Shift Linkage $45.00
Do you have a: 4L60E, 4L70E, or 4L80E with the neutral safety switch on the outside?
Then you will need out 4LE Fix it kit. This allows you to connect the linkage and not have any conflicts with the switch.
#4LE Kit $18.50
#4LE KIT
17www.shiftworks.com
#S138 & S139
#S143 & S144
Column Lens Indicators 1962-65 NOVA, 1961-64 IMPALA,1964-65 CHEVELLE & GTO/TEMPEST#S138 Indicator (TH) $19.50#S139 Indicator (OD) $19.50
1967 NOVA & 1967-68 CAMARO#S143 Indicator (TH) $19.50#S144 Indicator (OD) $19.50
COLUMN SHIFT CONVERSIONS
#S154
#S153
#S153 AS INSTALLED
1970-1972 MALIBU SWEEP DASH#S157 Indicator OD $19.50
1968 & 1969 CHEVELLE
These cleverly designed adaptors fit over the existing raised letter indicators for a permanent and factory appearing solution at an affordable cost.
#S145 68 Chevelle TH 3-speed $19.50#S146 68 Chevelle OD 4-speed $19.50#S147 69 Chevelle TH 3-speed $19.50#S148 69 Chevelle OD 4-speed $19.50
#S146 AS INSTALLED
1968-74 NOVA#S155 Indicator TH $19.50#S156 Indicator OD $19.50
#S156
#S155
1966 NOVA#S153 Indicator TH $19.50#S154 Indicator OD $19.50
18 www.shiftworks.com
HIGH OIL PRESSURE?Midrange for the HOP series is 60 pounds, versus the normal 30 pounds oil pressure gauge. The upper scale of the HOP series oil pressure gauge is 100+ pounds.#S505-HOP $215.00#S505-VHOP $215.00#S507-HOP $215.00
1966-67 CHEVELLE & NOVA SS GAUGE CONVERSIONS
Super Sport Gauge ConversionThis new SHIFTWORKS® conversion kit will allow anyone with the standard Chevelle or Nova in-dash gauges to convert to the Super Sport style gauge package.
These gauges are designed to fit into the EXISTING openings in the back of the dash. They include the Temperature sensing device and the mechanical Oil Pressure line and fittings. An ammeter is standard, as was used by GM.
1966-67 CHEVELLE#S505 SS Gauges Kit with Ammeter $205.00#S505-V SS Gauges Kit with Voltmeter $205.00#S505-ADP Adaptors For Shiftworks® Gauges In Factory SS Dash $25.00
1966-67 NOVA#S507-V SS Gauges Kit with Voltmeter $205.00
#S507-V
#S505
Use the voltmeter with one-wire alternators and non-GM wiring.
19www.shiftworks.com
In-Dash TachometerSHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.
All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.
1964-65 CHEVELLE#S510-1 1964-65 Chevelle In-Dash Tachometer $139.50
1968 CHEVELLE#S512 1968 Chevelle In-Dash Tachometer $139.50
1968 CHEVELLE IN-DASH TACHOMETER AND GAUGES#S508-VT Gauges Conversion with Tachometer Replaces Idiot Lights $325.00
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
#S510-1 Installed
#S512 Installed
#S512
Before After
#S510-1
20 www.shiftworks.com
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
In-Dash TachometerSHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a
Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.
All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.
1969 CHEVELLE#S513 1969 Chevelle
In-Dash Tachometer $134.50
1970-72 CHEVELLE SS#S514-G 1970 Chevelle
In-Dash Tachometer $134.50#S514-W 1971-72 Chevelle In-Dash Tachometer $134.50
1970-72 CHEVELLE MALIBU#S518-G 1970 Malibu
In-Dash Tachometer $134.50#S518-W 1971-72 Malibu In-Dash Tachometer $134.50
#S513
#S518-G
#S514-W
#S518 Installed
#S513 Installed
#S514 Installed
21www.shiftworks.com
NOVA IN-DASH TACHOMETER CONVERSIONS
1963-65 NOVA#S515 1963-65 Nova In-Dash Tachometer $139.50
1968-72 NOVA#S517-G 1968-70 Nova In-Dash Tachometer $134.50#S517-W 1971-72 Nova In-Dash Tachometer $134.50
#S515
#S517
#S515 Installed
#S517 Installed
22 www.shiftworks.com
Trans-StormerThe Trans-stormer shifter is a universal design suitable for many applications and specific to none. It is available as either a rod linkage or cable shifter, with a full neutral safety/back-up light switch, and with several knob and handle options. Same shifter for all TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80.
1963-64 NOVA & 1963 IMPALASW230-R22 10 inch w/white knob $285.00SW230-R23 10 inch w/black knob $285.00
1964 & EARLIER CORVETTEComplete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit.Smoothie KnobSW230-R24 6 inch & 1/2 inch diameter w/white knob $285.00SW230-R23 6 inch & 1/2 inch diameter w/black knob $285.00
1965-67 CORVETTEComplete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit.Button Top Knob
New body coming to replicate Original PowerGlide Shifter $350.00SW280-R05 1965-67 6 inch $275.00
1965-67 CORVETTE CONSOLE INSERTSS141 TH- 3 speed $44.50S142 OD- 4 speed $44.50
TRANS-STORMER
Installed in early Nova/Impala console.
SW230-R23
SW280-R05
S141 S142
TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80
SW230-R22
23www.shiftworks.com
PowerGlide ShifterAll Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply add a P to the part number prefix. For example, the SW230-R22 becomes a SW230P-R22. Price is the same. However, some PowerGlide transmissions may require an additional Range Selector Shaft and Lever available seperately. Both cable and rod linkage versions available.
PG-R Rod Linkage conversion $95.00PG-C Cable Linkage conversion $125.00
Conversions include range select shaft and kickdown shaft that must be installed into the transmission. Cables sold seperately.
1967 CAMARO & FIREBIRD & 1968-72 NOVAShifter for PowerGlideComplete with rod linkage, optional off sets and Neutral safety/backup light switch. Uses pre-existing PG range select lever at transmission. Shiftworks will be offering parts to connect to any PowerGlide.
SW280P-RCT $325.00
PowerGlide Rod Linkage PowerGlide Cable Linkage
24 www.shiftworks.com
Shifter for all Turbohydramatics TH3650, TH400, TH200-4R, TH700-R4, 4L60, 4L80
1967 CAMARO & FIREBIRD, 1968-72 NOVAComplete with all linkage, optional off sets, mounting system, and Neutral safety/backup light switch.SW280-RCT $350.00
1964-67 CHEVELLE & IMPALA, 1965-67 NOVA
SW280-CT7 7 inch T-Handle Shifter w/cable $350.00
New Shifter is complete witih all cable linkage, shiftworks cable, neutral safety switch, and T-handle with Trim-Parts black button.
25www.shiftworks.com
Shifters are available as either Rod Linkage or Cable with choice of knob styles. The SW280 has a 5/8’’ diameter handle and is available in 6, 7 or 8 inch length. The SW230 has a 1/2” diameter handle and is available in 6 or 10 inch length.SW280-R Rod Linkage $275.00SW280-C Cable $275.00 *Cable purchased seperately
SW230-R Rod Linkage $285.00SW230-C Cable $285.00 *Cable purchased seperately
T-handle: Add $75.00 for Curved, and $20.00 for Straight.
Curved T-Handle
Rod Linkage Kit Cable Kit
Straight T-Handle Button Top Knob Smoothie Knob
26 www.shiftworks.com
CONSOLE HOUSING, CONSOLE MOUNT, INDICATOR & SLIDERMounts directly to shifter and can be used with or without the Shfitworks console housing. Great for custom applications.NOTE: These indicators are for STANDARD GATE. They will not line up for the short gate.
SW280-014A 3-speed indicator $44.50SW280-014B 4-speed OD indicator $44.50
CONSOLE HOUSINGHousing is vacuum molded and about 5 inches high x 16 inches long x 6 inches wide with a 1/2 inch deep recess. It can be cut down as required to fit.
SW280-CH $38.50
TRANS-STORMER
27www.shiftworks.com
Rod Linkage Shifter
Cable Linkage Shifter
Shiftworks
®
200 Air Park DriveSuite 10 Rochester, NY 14624Ph: (585) 436-0139Fax: (585) 436-0143
IN-DASH GAUGE CONVERSIONS