Sheetmetal Machinery Australia Pty Ltd

sales@powercocrimping.comwww.powercocrimping.com

Powerco Crimping Australasia Pty Ltd 45/756 Burwood Highway, Ferntree Gully Victoria 3156Ph: +61 3 9758 9013 Fax: +61 3 9752 3305

P20CS and P32CS-12V (Ideal choices for Service Vehicles)This model can utilise the DC electrical power source of a mobile service vehicle or an industrial machine. The Crimping Diameter is set by stepless adjustment of the 10-turn Vernier Scale Dial, to accuracy of +- 0.1 mm. Features include; easy Push Button controls, with automatic stop when the preset Crimp Diameter is reached.

Low pressure, to multi-spiral high pressure hydraulic hose assemblies can be crimped with the P20CS or P32CS. Hoses can be fed horizontally from both front and rear of the machine. Rapid Retraction of the dies is assisted by two gas springs units. Hose Couplings from 1/4” up to maximum hose size 1 1/4” can be crimped with the P20CS or up to 2” with the P32CS. Both models are also available in 24V version

Please note: The Crimping head is supplied on the left of the motor as Standard.

P16HP-1” Portable Hydraulic Hand Pumpis a truly portable crimper; lightweight and compact in dimensions, but robust in construction. It is operated by a hydraulic hand pump.

The P16HP is ideally suited for manufacture of hose assemblies in mobile service vehicles and areas where electrical power is not available. It can be carried onto the job site using the built in handle. The built in drawer in the base frame (5 compartments) holds the Die Sets.The Crimping Die Sets clip into Master Dies, and are released with a twist. Hose couplings from 1/4” up to a maximum hose size 1” can be crimped.

To operate the machine the hose is fed horizontally only into the front of the machine. The dies are retracted by springs. The Crimp Diameter is easliy set by the accurate Vernier scale. When the preset Crimp Diameter is reached, an indicator lamp is lit, and operation of the pump must be manually stopped.

The Maximum Input Pressure for the P16HP is 620 bar (9,000 psi)

Finn-Power 32MS and 32UC has the same fabulous crimping features as the 20 series ofcrimping machines. They are mid-range in terms of power, but compact from the point of view ofspace requirements. 32 machines provide 2000 kN crimping force in a highly compact, ergonomical design. They are ideally suited for single piece production in machine shops,repair workshops etc. All table-top machines can be mounted on a Quick Change Tool Base. Up to 16 die sets can be stored in a base for operator convenience.

CRIMPING MACHINES - 32MS - 2”• Precision, durability, force and ease of use.• Ergonomic design.• Available with MS or UC Controller.• Single phase or Three phase• High-quality crimping power for years and years• User friendly Quick Change Tool system.• Options available:

• Special die sets• Mechanical back stop• Quick change tool base• Die Set rack for dies• Foot pedal

Reliable qualityTrusted by Professionals

Service & Spare PartsPowerco Crimping is an authorised FINN•POWER service provider in Australia. We are the only company that supports their crimping machinery sales with spare parts and a dedicated service and calibration department.

We provide full back up for customers to ensure that all machinery purchased continues to give quick and accurate crimping year after year. This is also supported by providing a comprehensive range of genuine parts and consumable stock.

To request a service and calibration to be carried out, or for any enquiries regarding parts and consumables please call us on +613 9758 9013

+613 9758 9013

Skiving of hydraulic hoses (external and internal) from dimensions 3/16” to 2”.

• Controlled by a foot pedal.• Easily adjustable with one screw• Additional waste bin• Separate tool rack• Sided bladeholder

Weight approx. 34 kg. Hose capacity - external inch 3/16”– 2”Hose capacity - internal inch 1/2”–2”Electric motor - 0.75 kWSpeed of tool rotation r/min100

SKIVING Hydraulic Hoses (external and internal)

BAR CODE READERThe Bar Code Readers benefits include:• Speeding up the retrieval of crimping

parameters• Reducing the possibility of human error• Supports Quality control

For more information contact us +613 9758 9013

Finn-Power P51 and P60 models are the strongest table top machines in the Finn-Power general machine line. Their wide opening makes it possible to crimp industrial hoses up to 4”.

As there is no axial movement of the dies during the crimping, positioning is easy and accurate. Further, the control unit can beturned within 100 degrees to suit operator’s preferences.

Finn-Power UC control extends these models’ targets of use by giving the possibility to make a crimp according to a diameter and/or pressure.

FINN-POWER 120 SERIAL PRODUCTIONFinn-Power 120 is unbeaten in terms of speed, precision, durability and quality.Hydraulic and crimping units are separated for allowing optimal use of space. Finn-Power 120’s operating unit with free placing and all-round use possibility enables the machine to be used from front, back and side.

The Finn-Power 120 model has 3 die racks, side table to the right and a mirror as a standard.

Options available: • Auto greasing• Foot pedal• Side table• Die set racks• Connection kit• Oil cooler• Speed adjustment• Pinning support mandrel• UC1, UC2, UC3

sales@powercocrimping.comwww.powercocrimping.com

Powerco Crimping Australasia Pty Ltd 45/756 Burwood Highway, Ferntree Gully Victoria 3156Ph: +61 3 9758 9013 Fax: +61 3 9752 3305

Finn-Power controls are well-known for their ease of use and wide range of features.

The Finn-Power UC control is a modern user interface based on icons, a selector and clear, visual display of all crimping parameters.UC control has exact and logical navigation. All most commonly used functions are easily accessible. Tool Change Wizard tells when the die set has to be changed and guides the operator during the die change.

The stand-by function saves energy. Machine runs only when crimping is started and turns to the powersave mode after a set time. Other features are the connectivity via ethernet and USB ports and expandability. Various different options enable pressurecrimping, step crimping and onlinequality control.

P51 and P60 ModelsStrongest table top machines

UC CONTROL

HOSE CUTTERFinn-Power CM30 and CM35 cutting machines are manually operated and designed for service use, in workshops and service vans. They can be used for cutting up to 2” braided hoses efficiently, fast and safely.

Both models are equipped with fume exhaust connections. Available in 12V, single phase or 3 phase