sheet metal - danchuk.comcatalog... · 12 section sheet metal in this section: • floor sections...

12SECTION

Sheet Metal

IN THIS SECTION:

• Floor SectionS• Patch PanelS• BracketS• BraceS• Body SealS

Weather, salt, snow and old father time took a real toll on your new project’s body panels and floor. And then there is that hidden butcher job repair that some kid did 30 years ago to contend with. Good thing almost every steel sheet-metal part imaginable is now available.

In the sheet metal section Danchuk offers both “Made in the USA” sheetmetal by Experi-Metal and the import items by GoldenStar Automotive , so you can be sure that whatever you need for your restoration we have it. Complete hood assemblies, fenders, doors, trunk lids, door skins, complete inner rear quarter sections and com-plete quarters for sedans and hardtops, made just like GM did in 1955-57, that run from lead line to lead line to lead line.

Danchuk has every brace, every patch panel, brand new rocker assemblies, anything for the trunk, door hinges, A and B pillars, firewalls…heck we even have a new roof if you need one. Also, you will find the quality Danchuk fender anti-squeak kits, inner fender seals, all the floor and body plugs needed to plug those nasty holes along with our body mount kits and shims listed in these pages.

And if you just don’t feel like starting with a rusted hulk, we have complete bodies available too - Hardtop, Sedan and Convertible bodies by Woody’s HotRodz!

Not sure which parts you need? Our friendly Customer Service Department can help you figure it out!

438

Shee

t Meta

l

Sheet Metal

1955 Front end Sheet metal layoUt

oUter FenderS

oUter FenderS

hood #16128

inner FenderS w/ extenSionSFront SPlaSh Pan w/lower Fender aPronS

radiator core SUPPort and Filler PanelS

Shee

t m

eta

l

#16880 #16879

#12253

#16050 #16049

#16040-16041

1955 Front end Sheet metal comPonentS1955 Hood Assembly w/ Holes ................................................................................... #16128 .................................. $529.95/ea.1955 Front Filler Panels, 3-Piece ................................................................................ #12253 .................................. $174.95/set1955 Inner & Outer Fender Assemblies without Apron, Driver ................................ #16879 ...................................$899.95/pr.1955 Inner & Outer Fender Assemblies without Apron, Passenger ........................ #16880 ...................................$899.95/pr.1955 Radiator Core Support Side Filler Panels, Driver, Black ................................. #16049 .................................... $22.95/ea.1955 Radiator Core Support Side Filler Panels, Passenger, Black ......................... #16050 .................................... $22.95/ea.1955 Radiator Core Supports with Upper Bars, 6-Cylinder ..................................... #16040 .................................. $239.95/ea.1955 Radiator Core Supports with Upper Bars, V8 ................................................... #16041 .................................. $239.95/ea.

http://www.danchuk.com/ItemForm.aspx?Item=16128








Phone : (800) 854-6911 • www.danchuk.com 439

Sheet Metal

Front SPlaSh Panlower core SUPPort SPlaSh Pan FillerS

inner Fender BaFFleS

hood #16129

inner FenderSinner FenderS

radiator core SUPPort w/ Filler PanelS

oUter FenderS

oUter FenderS

Sheet m

etal

#17233#17233

#1360/1358

#16052

#1357/1359

#17893 #17892

#16047-16046

#16051

#16136 #16135

#1342#16088 #16087

1957 Front end Sheet metal comPonentS1957 Hood Assembly ................................................................................................... #16129 .................................. $649.95/ea.1957 Full Fender, Driver, Bel Air & 210 ....................................................................... #1357 .................................... $419.95/ea.1957 Full Fender, Passenger, Bel Air & 210 ............................................................... #1358 .................................... $419.95/ea.1957 Full Fender, Driver, 150, No Holes ...................................................................... #1359 .................................... $419.95/ea.1957 Full Fender, Passenger, 150, No Holes .............................................................. #1360 .................................... $419.95/ea.1957 Fender Support to Cowl Brackets ..................................................................... #17233 .....................................$25.95/pr.1957 Front Filler Panel ................................................................................................. #1342 .................................... $209.95/ea. 1957 Side Filler Panels, Driver. ................................................................................... #17892 .....................................$21.95/ea.1957 Side Filler Panels, Passenger ............................................................................ #17893 .....................................$21.95/ea.1957 Front, Inner Fenders, Driver ............................................................................... #16135 .................................. $269.95/ea.1957 Front, Inner Fenders, Passenger ....................................................................... #16136 .................................. $269.95/ea.1957 Splash Shields, Front, Driver, 13” x 12” ............................................................. #16087 .....................................$87.95/ea.1957 Splash Shields, Front, Passenger, 13” x 12”...................................................... #16088 .....................................$87.95/ea.1956-57 Lower Front Radiator Splash Shields, Driver, Black ................................... #16051 .................................... $89.95/ea.1956-57 Lower Front Radiator Splash Shields, Passenger, Black ........................... #16052 .................................... $89.95/ea.

1957 Front end Sheet metal layoUt
















440

Shee

t Meta

l

Sheet Metal1957 hood aSSemBly made in the USa1957 w/ Holes ............................................................................................................... #14637 .................................. $799.95/ea.

1955 hood aSSemBly made in the USa1955 w/ Holes ............................................................................................................... #12401 .................................. $599.95/ea.

ho

od

aSS

emBli

eS




Sheet Metal

1957 hood aSSemBly1957 ............................................................................................................................... #16129 .................................. $649.95/ea.

1955 hood aSSemBly1955 w/ Holes ............................................................................................................... #16128 .................................. $529.95/ea.

ho

od

aSSem

BlieS



442

Shee

t Meta

l

Sheet Metal

ho

od

S

chevy center hood BaFFle BraceThis brace is to support the center hood baffle. Danchuk #16214 will work on any model 1955 classic Chevy.1955 ............................................................................................................................... #16214 .................................... $78.95/ea.

1955 Smoothie Style hood aSSemBly1955 ............................................................................................................................... #17908 .................................. $539.95/ea.




Sheet Metal

hea

dliG

ht

Front Fender headliGhtinner Patch PanelS This is the preferred replacement panel for 1956 models when rust appears below the headlight. The dimensions are 11"H x 2"D. Made in the USA.1956 Driver ....... #1367 ........$48.95/ea.1956 Passenger . #1368 ........$48.95/ea.

Front Fender headliGht Patch PanelSRust is an insidious enemy that knows no boundaries, attacking and eating away the metal anywhere and everywhere it can. Here is a great way to start fresh! 7"H x 5"D. Made in the USA.1956 Driver ..................................................................#1365 .................. $65.95/ea.1956 Passenger ...........................................................#1366 .................. $65.95/ea.

#1365#1366

headliGhtmoUntinG BracketFits left or right. Welds inside part #10013 and #10014 to support the headlight bucket.1955 .................... #12409 ......$54.95/ea.

headliGht Patch PanelS, Show QUalityDimensions are 8"H x 8"D.1955 Driver ..................................................................#10013 ................. $99.95/ea.1955 Passenger ...........................................................#10014 ................. $99.95/ea.

Front SPlaSh Pan SealSThis seal helps protect your engine com-partment from water and dirt. Engine heat and the passing of time will eventually wear rubber parts, so if you haven’t yet replaced that old seal, do it before your work is compounded. Made in the USA.1957 .................... #288 ........... $11.95/pr.

#2881957 SPlaSh Pan SealSThese rubber dust seals were installed at the outer edges the splash pan on both sides. The "C" edge slips up over the edge of the splash pan with the flap facing up and forward. It was originally stapled in four places on each side. It will be necessary to poke a hole in the outer edge so the outer splash pan to fender bolt may be installed.

Front Fender headliGht Patch PanelS 1956 Driver ..................................................................#17203 .............. $239.95/ea.1956 Passenger ...........................................................#17204 .............. $239.95/ea.











444

Shee

t Meta

l

Sheet Metal

ra

dia

tor

#16041#16043 #16047radiator core SUPPortS with UPPer BarSFinally available! These 6-cylinder position core supports, with the upper bar, are just what you need for that big block transplant as well as an original restoration running a 6-cylinder engine or a small block with a long water pump. 1955 6-Cylinder ............................................................................................................ #16040 .................................. $239.95/ea.1956 6-Cylinder ............................................................................................................ #16043 .................................. $239.95/ea.1957 6-Cylinder ............................................................................................................ #16046 .................................. $239.95/ea.

Over the years a core support can really take a beating. Replace yours with this brand new unit, complete with upper bar, and spruce up that engine compartment.1955 V8 .......................................................................................................................... #15214 .................................. $489.95/ea.1955 V8 .......................................................................................................................... #16041 .................................. $239.95/ea.1957 V8 .......................................................................................................................... #15596 .................................. $489.95/ea.1956 V8 .......................................................................................................................... #16044 .................................. $239.95/ea.1957 V8 .......................................................................................................................... #16047 .................................. $239.95/ea.1955-57 V8 without Bar ................................................................................................ #10015 .................................. $524.95/ea.

#10015 #15214

radiator core UPPer SUPPort BarSYour front sheet metal won’t line up properly if you don’t have a straight core support.1955 ............................................................................................................................... #11946..................................... $89.95/ea.1955 Black .................................................................................................................... #16042 .................................... $89.95/ea.1956 Black .................................................................................................................... #16045 .................................... $89.95/ea.1957 ............................................................................................................................... #2034 ...................................... $85.95/ea.1957 Black .................................................................................................................... #16048 .................................... $89.95/ea.

#16145

#16148

#2034
















Sheet Metal

#16049

#16050

#12180a

#12179

#12210

radiator core SUPPort Side Filler PanelSFilling in between the radiator and the inner fender wall, these top-quality filler panelsare a great way to help keep dirt and grime out of the engine compartment. 1955 Sheet Metal Repro .............................................#2093 ................... $58.95/pr.1957 Driver, Sheet Metal Repro..................................#1880 .................. $54.95/ea.1957 Passenger, Sheet Metal Repro ..........................#1881 .................. $54.95/ea.1955 Plain, Aluminum, Custom Repro. ......................#12179 ............... $135.95/pr.1956 Plain, Aluminum, Custom Repro. ......................#12179A ............. $139.95/pr.1957 Plain, Aluminum, Custom Repro. ......................#12179B ............. $139.95/pr.1955 Plain, Steel, Custom Repro ...............................#12180 ............... $134.95/pr.1956 Plain, Steel, Custom Repro ...............................#12180B ............. $134.95/pr.1957 Plain, Steel, Custom Repro ...............................#12180C ............. $134.95/pr.1955 Plain, Powder Coat, Custom Repro ..................#12180A ............. $159.95/pr.1956 Plain, Powder Coat, Custom Repro ..................#12180D ............. $159.95/pr.1957 Plain, Powder Coat, Custom Repro ..................#12180E ............. $159.95/pr.1955-56 Polished Aluminum, Custom Repro. ...........#10049 ............... $374.95/pr.1957 Polished Aluminum, Custom Repro .................#10050 ............... $374.95/pr.1955 Driver, Black .......................................................#16049 ................ $22.95/ea.1955 Passenger, Black ...............................................#16050 ................ $22.95/ea.1956 Driver ..................................................................#17890 .................$21.95/ea.1956 Passenger ...........................................................#17891 .................$21.95/ea.1957 Driver. ..................................................................#17892 .................$21.95/ea.1957 Passenger ...........................................................#17893 .................$21.95/ea.

#10050

See ShiPPinG inFormation on PaGeS 611-612 For

exPlanationS on trUck FreiGht

and overSiZed ShiPPinG.

Filler Pa

nelS

chrome v8radiator SUPPort kitS1955 .................... #17610 .....$474.95/kit1956 .................... #17611 .....$474.95/kit1957 .................... #17612 .....$474.95/kit





http://www.danchuk.com/ItemForm.aspx?Item=12179A

http://www.danchuk.com/ItemForm.aspx?Item=12179B



http://www.danchuk.com/ItemForm.aspx?Item=12180C


http://www.danchuk.com/ItemForm.aspx?Item=12180D

http://www.danchuk.com/ItemForm.aspx?Item=12180E












446

Shee

t Meta

l

Sheet Metal

SPla

Sh S

hie

ldS

SPlaSh ShieldSRear shields are the rear portion of the inner front fender, while the front splash shields fill the gap between the front edge of the inner fender, the front filler panel and outer fender just behind the grille. 1955 Rear, Driver .........................................................#10017 ................. $59.95/ea.1955 Rear, Passenger .................................................#10018 ................. $59.95/ea.1955 Rear, Driver .........................................................#16085 ................ $69.95/ea.1955 Rear, Passenger .................................................#16086 ................ $69.95/ea.1957 Front, Driver, 13" x 12" ........................................#1131 ................... $99.95/ea.1957 Front, Passenger, 13" x 12" ................................#1132 ................... $99.95/ea. 1957 Front, Driver, 13" x 12" ........................................#16087 ................. $87.95/ea.1957 Front, Passenger, 13" x 12" ................................#16088 ................. $87.95/ea.

#16087 #16088

#16086

#1131 & #1132

#10017 & #10018

lower Front radiator SPlaSh ShieldSAttaches to the bottom edge of the inner fender behind the core support and fills the gap between the core support and the cross member.1956-57 Driver ... #2108 ........$99.95/ea.1956-57 Passenger

........................ #2109 ........$99.95/ea.1956-57 Driver, Black

........................ #16051 ......$89.95/ea.1956-57 Passenger, Black

........................ #16052 ......$89.95/ea.

#16051

#16052

#2109

#2108




#16085














Sheet Metal

radiator core SUPPort center Filler PanelThis was only used on V8 applications.1955-57 V8 ...................................................................#1895 ...................$21.95/ea.

radiator StraP aSSemBly1955-57 V8 ......... #10016 ....$164.95/ea.

Front Filler PanelS1955 3-Piece ................................................................................................................. #12253 .................................. $174.95/set1956 .............................................................................................................................. #1340 .................................... $199.95/ea.1957 ............................................................................................................................... #1342 .................................... $209.95/ea.

radiator SPlaSh Pan center SUPPort BracketRiveted to the splash pan for extra strength, the radiator splash pan center support bracket prevents the pan from sagging, keeping dirt and grime out of the engine compartment. Bolts or screws may be used as an alternative to rivets. This bracket also holds up the hood latch support. 1955 .............................................................................#2074 ...................$21.95/ea.

Front SPlaSh Pan toFender retainerS1957 ................... #2252 .......... $8.95/pr.

#12253

#1340

#1342

Filler Pa

nelS








448

Shee

t Meta

l

Sheet Metal

Fen

der

S

FUll FenderSSee page 450 for inner fenders. 1955 Driver, Made in the USA. ..................................................................................... #15413 .................................. $998.95/ea.1955 Passenger, Made in the USA. ............................................................................. #15414 .................................. $998.95/ea.1957 Driver, Bel Air & 210 ............................................................................................ #1357 .................................... $419.95/ea.1957 Passenger, Bel Air & 210 .................................................................................... #1358 .................................... $419.95/ea.1957 Driver, 150, No Holes .......................................................................................... #1359 .................................... $419.95/ea.1957 Passenger, 150, No Holes ................................................................................... #1360 .................................... $419.95/ea.

#15413

15414

#1357

#15414








Sheet Metal

Fend

erS

inner Fender SUPPort to cowl BracketSThese brackets attach to the lower cowl forward leg and secure the inner fender to the cowl leg. Made in the USA.1957 ................... #2072 ........ $18.95/pr.

Fender SUPPortto cowl BracketSMade in the USA. 1955-56 .............. #12823 ...... $18.95/pr.

Front Fenderto UPPer cowl BracketMade in the USA.1955 Either Side #15217 ......$34.95/ea.

cowl to FendermoUnt BracketSMade in the USA. 1955 Driver ........ #15310 ......$32.95/ea.1955 Passenger . #15311 ......$32.95/ea.

lower Fender extenSionS1956 Inner Front, Driver ..............................................#15765 ................ $78.95/ea.1956 Inner Front, Passenger ......................................#15766 ............... $78.95/ea.

inner & oUter Fender aSSemBlieS withoUt aPron This part includes the inner and outer fender assembly.1955 Driver ................................................................................................................... #16879 ...................................$899.95/pr.1955 Passenger ............................................................................................................ #16880 ...................................$899.95/pr.

#16879

#16880

Fender SUPPort to cowl BracketS1957 .................... #17233 ...... $25.95/pr.

Fender toinner Fender BraceThis often overlooked item mounts be-tween the front inner wheelhouse and fender at the inside fender lip and keeps the fender from shaking. 2 needed per car. Fits both sides.1957 .................... #17688 ......$16.95/ea.












450

Shee

t Meta

l

Sheet Metal

Fen

der

S

#16135

#16136

Front, inner FenderS1955 Driver ..................................................................#12372 ...............$164.95/ea.1955 Passenger ...........................................................#12373 ...............$164.95/ea. 1956 Driver. ..................................................................#17776 .............. $239.95/ea.1956 Passenger ...........................................................#17777 .............. $239.95/ea.1957 Driver ..................................................................#10184 ............... $359.95/ea.1957 Passenger ...........................................................#10185 ............... $359.95/ea.1957 Driver ..................................................................#16135 .............. $269.95/ea.1957 Passenger ...........................................................#16136 .............. $269.95/ea.

Front Fender, lower rear Patch PanelS Of all the panels on a car, the lower rear portion of the front fender usually rusts out first. Replace it while the rust is still isolated to this area. Dimensions for #2772 and #2773 are 18" x 15"; #1361 and #1362 are 18" x 16"; and #2774 and #2775 are 19" x 15-1/2".Made in the USA.1955 Driver ..................................................................#2772 .................. $98.95/ea.1955 Passenger ...........................................................#2773 .................. $98.95/ea.1956 Driver ..................................................................#1361 .................. $84.95/ea.1956 Passenger ...........................................................#1362 .................. $84.95/ea.1957 Driver ..................................................................#2774 .................. $69.95/ea.1957 Passenger ...........................................................#2775 .................. $69.95/ea.

Fender BracketS,on Front FenderSLocated at the rear of the fender at the door. Made in the USA.1955 Driver ........ #2994 ........$89.95/ea.1955 Passenger . #2995 ........$89.95/ea.1957 Driver ........ #2996 ........$98.95/ea.1957 Passenger . #2997 ........$98.95/ea.

inner Fenderwire harneSS cliPSMade in the USA.1955-57 .............. #1006 ...... $38.95/set

Grille Bar to Fender Brace SUPPortThese are side support braces for the grille bar. The brace connects and supports the grille bar by attaching to the inside corner of the front fenders. Made in the USA.1957 Driver ........ #15597 ...... $27.95/ea. 1957 Passenger . #15598 ..... $27.95/ea.

Fender reinForcement1957 Driver, Front

........................ #2998 ........$13.95/ea.

#10184
























Sheet Metal

Fend

er

Fender SkirtS with BracketS Seals available below.1955 (Shown)..... #385 ........ $157.95/pr.1956 (Shown)..... #389 ........ $154.95/pr.1957 .................... #380A ..... $154.95/pr.

inner Fender SealSOur fender seals are manufactured with rubber formulas that far outlast the original parts. These inner fender seals are an absolute must when replacing or repairing front fenders or inner fender wells. Made in the USA.1949-56 ............. #558 .......... $19.95/pr.1957 .................... #559 .......... $19.95/pr.

rear acceSSoryFender-to-FenderSkirt SealS All accessory fender skirts should be wrapped with these seals before instal-lation to protect the paint finish on the fenders. Sold as a pair. Made in the USA.1955-57 .............. #554 .......... $15.95/pr.

Fender anti-SQUeak GaSket kitSThese kits contain an assortment of specialized parts, each one die cut or extruded to exact specifications. Whether you are doing a front clip removal for an engine detail, or a complete frame-off restoration, this is the only way to totally eliminate front end body panel squeaks. Made in the USA.1955 ..............................................................................#294 ......................$17.95/kit1956 ..............................................................................#390 ......................$17.95/kit1957 ..............................................................................#295 ......................$17.95/kit

Front cornerFender reinForcementS 1957 Driver ....... #10001 ......$14.95/ea.1957 Passenger . #10002 ......$14.95/ea.

Front Fender SUPPort BracketSThis brace rivets to the fender lip in the wheel opening. Helps to secure fender lip to inner fender.1955 Driver ........ #1893 ........$58.95/ea.1955 Passenger . #1894 ........$58.95/ea.

StainleSSFender Skirt ScUFF PadS 1955 .................... #1032 .........$21.95/pr.1956 (Shown)..... #1039 .........$21.95/pr.1957 .................... #1043 .........$21.95/pr.

hood anti-SQUeakGaSket kitSWhen those original hood gaskets de-teriorate, the metal panels contact each other and create a noise that must be silenced! The installation of this kit will eliminate those unwanted squeaks. Made in the USA. 1955-56 ............. #857 ............ $8.95/kit1957 .................... #391 .......... $13.95/kit

Fender Skirt BracketSDon’t forget to replace the brackets when repainting and resealing those old fender skirts. Fits all Foxcraft fender skirts. Set of 4. Made in the USA.1955-64 .............. #236 ........... $5.95/set

#390

#295

#294

#857























452

Shee

t Meta

l

Sheet Metal

Firew

all

FirewallSWhat a work of art these sought after parts are. These firewalls are all there top to bottom with the toe boards and stamped in one piece just like GM did it! The firewall to frame braces are in place and the kick panel retainers are attached, including all captive nuts.1955-56 ........................................................................#16089 ............. $589.95/ea.1957 ..............................................................................#16090 .............. $589.95/ea.

#16089 toP view

#16090

Firewall coverSSmooth your firewall with these panels for a clean look. Welding required.Made in the USA.1955-56 .............. #12181 ....$248.95/ea.1957 .................... #12182 ....$248.95/ea.

Smoothie Factory FirewallReproduction of the original firewall with all the small holes inboard of the hood hinges are removed. Great for customs and right hand drive conversions. The holes removed are: heater box, heater valve, wiper motor, gas pedal, steering column, clutch rod, and master cylinder holes have been eliminated. Includes firewall and main cowl braces with forward body mount point.1955-56 ........................................................................#17961 .............. $549.95/ea.1957 ..............................................................................#16888 .............. $475.95/ea.

comPlete Firewall with windShield Frame1957 Convertible .........................................................#17392 ............$3,195.95/ea.

rePlacement SmoothFirewall PanelSee page 226 for photo. 1957 will require trimming.1955-57 w/ 4" Setback............................ #15468 .... $441.95/ea.










Sheet Metal

#16055 #16056

UPPer cowl PanelThis beautiful part covers the entire bottom of the windshield! It goes from the top of the firewall to the front of the dash panel. Included is the lower glass drains, cutouts for the defroster ducts and cutouts for the wipers.1957 Inner ..................................................................................................................... #16057 .................................. $469.95/ea.

cowl Side PanelS1955-56 Outer, Driver ..................................................#12658 ................ $84.95/ea.1955-56 Outer, Passenger ..........................................#12659 ................ $84.95/ea.1955-56 Outer, Driver ..................................................#16055 ................ $79.95/ea.1955-56 Outer, Passenger ..........................................#16056 ................ $79.95/ea.

#12658 #12659

lower center cowl Panel1955-56 ......................................................................................................................... #16651 .................................. $369.95/ea.




cow

l Pan

elS

toP cowl Panel with winShield FlanGe1955-56 ......................................................................................................................... #17433 .................................. $469.95/ea.








454

Shee

t Meta

l

Sheet Metal

Factory Style rockerSwith Fender BracketSThese factory style outer rockers set themselves apart from the others by including the front fender bracket already installed, saving you time.1955 Driver. ..................................... #16881 ......... $119.95/ea.1955 Passenger .............................. #16882 ......... $119.95/ea.1956 Driver. ..................................... #16883 ......... $119.95/ea.1956 Passenger .............................. #16884 ......... $119.95/ea.1957 Driver ..................................... #16885 ......... $119.95/ea.1957 Passenger .............................. #16886 ......... $119.95/ea.

cowl Side extenSion hinGemoUntSLocated in front cowl area where the door hinge attaches. Made in the USA.1957 Driver ..................................... #12140 ..........$78.95/ea.1957 Passenger .............................. #12141 ..........$78.95/ea.

cowl Side PanelSThese are very nice and complete pieces including the threaded inserts.1957 w/ A-Pillar Section, Driver ... #16058 ...........$79.95/ea.1957 w/ A-Pillar Section, Passenger......................................................... #16059 ...........$79.95/ea.

#16058

#16059

oUter cowl SideSThis piece replaces cowl side panels in front of door hinge area. 1957 Driver ........ #12136 .....$98.95/ea.1957 Passenger . #12137 .....$98.95/ea.

See ShiPPinG inFormation on PaGeS 611-612 For exPlanationS on trUck FreiGht


ro

cker

Pa

nel

S

#16881

#16882

#16883

#16884

#16885

#16886

Factory Style, 4-door oUter rocker PanelS1956 Sed/Wgn, Driver .................... #17384 .........$149.95/ea.1956 Sed/Wgn, Passenger ............ #17385 .........$149.95/ea.1956 Hardtop, Driver ...................... #17387 .........$149.95/ea.1956 Hardtop, Passenger .............. #17386 .........$149.95/ea.1957 Sed/Wgn, Driver .................... #17380 .........$149.95/ea.1957 Sed/Wgn, Passenger ............ #17381 .........$149.95/ea.1957 Hardtop, Driver ...................... #17382 .........$149.95/ea.1957 Hardtop, Passenger .............. #17383 .........$149.95/ea.

#17384

#17385

#17386

#17387






















Sheet Metal

inner rocker Panel BraceS1955-57 Driver .............................................................................................................. #1151....................................... $54.95/ea.1955-57 Passenger ...................................................................................................... #1152....................................... $54.95/ea.1955-57 Driver .............................................................................................................. #16176 .................................... $59.95/ea.1955-57 Passenger ...................................................................................................... #16177 .................................... $59.95/ea.

1955 Driver (Shown) .................................................................................................... #1831 ...................................... $99.95/ea.1955 Passenger (Shown) ............................................................................................ #1832 ...................................... $99.95/ea.1956-57 Driver .............................................................................................................. #1833 ...................................... $94.95/ea.1956-57 Passenger ...................................................................................................... #1834 ...................................... $94.95/ea.1957 Rear Driver Dog Leg, 4-Door .............................................................................. #2968 ...................................... $48.95/ea.1957 Rear Driver Dog Leg, 4-Door .............................................................................. #2969 ...................................... $48.95/ea.1955 Driver, Replacement, 2-Door .............................................................................. #2970 ...................................... $48.95/ea.1955 Passenger, Replacement, 2-Door ...................................................................... #2971 ...................................... $48.95/ea.1955 Driver, Replacement, 4-Door .............................................................................. #2972 ...................................... $44.95/ea.1955 Passenger, Replacement, 4-Door ...................................................................... #2973 ...................................... $44.95/ea.1956-57 Driver, Replacement, 2-Door (Shown) .......................................................... #2974 ...................................... $48.95/ea.1956-57 Passenger, Replacement, 2-Door ................................................................. #2975 ...................................... $48.95/ea.1956-57 Driver, Replacement, 4-Door ......................................................................... #2976 ...................................... $44.95/ea.1956-57 Passenger, Replacement, 4-Door ................................................................. #2977 ...................................... $44.95/ea.1956-57 Outer, Driver, 4-Door Sedan & Wagon ......................................................... #10124 ................................... $144.95/ea.1956-57 Outer, Passenger, 4-Door Sedan & Wagon .................................................. #10125 ................................... $144.95/ea.

#10125

#2974

#1831-1832

rocker PanelS Our rocker panels are factory reproductions, (with the ex-ception of part #2970-2977) featuring the same structural backside flanging found on the original parts. Body work is no place to settle for a cosmetic cover-up, and with these parts, you’re doing the job right. Dimensions for #1831-1834 are 46" x 4" x 3-1/2". Fits 2-Door hardtop and wagons, sedan, convertible, and Nomads. Parts #2970-2977 are replacement patch panels only. Be sure to order rocker panel brackets #15033 - #15035 to complete the job. Made in the USA.

#16176

#16177

#2975

#10124

#1151&

#1152

ro

cker

Pan

elS

oUter rocker PanelSThese factory style rockers feature the inner braces and front fender bracket to ease installation.1955 4-Door Sedan/Wagon, Driver ............................................................................. #17782 .................................. $139.95/ea.1955 4-Door Sed/Wagon, Passenger .......................................................................... #17783 .................................. $139.95/ea.























456

Shee

t Meta

l

Sheet Metal

rocker Panel PlUGS All rubber plugs should be inspected and replaced if necessary. Made in the USA.1955-57 .............. #826 .............$7.95/pr.

oUter Frontrocker Panel inSertSOuter rocker panel front insert welds to the inside of the outer rocker panel. Made in the USA.1957 Driver ....... #2966 ........$43.95/ea.1957 Passenger . #2967 ........$43.95/ea.

lower rear Fender torocker Panel Bracket SetS4-piece set that includes the rocker panel end caps. Made in the USA.1955 (Shown)..... #15033 ......$98.95/ea.1956 ................... #15034 ......$98.95/ea.1957 ................... #15035 ......$99.95/ea.

“a” Pillar PanelS1955-56 Driver, Partial (Shown) .................................#12266 ...............$115.95/ea.1955-56 Passenger, Partial (Shown) ..........................#12267 ...............$115.95/ea.1957 Driver, Partial ......................................................#12268 ...............$115.95/ea.1957 Passenger, Partial ..............................................#12269 ...............$115.95/ea.

“B” Pillar FUll PanelSFits 2-door hardtop and convertibles. See below for convertible “B” pillar braces.1955-57 Driver ............................................................#10116 ................$165.95/ea.1955-57 Passenger .....................................................#10117 ................$165.95/ea.

“B” Pillar BraceS1955-57 Driver, Convertible ........................................#1139 ..................$159.95/ea.1955-57 Passenger, Convertible ................................#1140 ..................$159.95/ea.

“B” Pillar BracketS1955-57 Driver, Convertible

........................ #1141 ........$28.95/ea.1955-57 Passenger, Convertible

........................ #1142 ........$28.95/ea.

#1140

#1141

#1139

#1142

Pill

ar P

an

elS

“a” Pillar reinForcementS1955-56 Sedan, HT, 1957 Conv., Left Hand ................#17566 ................ $44.95/ea.1955-56 Sedan, HT, 1957 Conv., Right Hand .............#17567 ................ $44.95/ea.1957 Sedan, HT, Left Hand .........................................#17568 ................ $44.95/ea.1957 Sedan, HT, Right Hand ......................................#17569 ................ $44.95/ea.

“a” PillarreinForcementSWelds to lower inner cowl area below door hinge to reinforce the doorhinge pillar. Made in the USA.1955-57 Driver ... #12134 .....$38.95/ea.1955-57 Psngr ... #12135 .....$38.95/ea.
























Sheet Metal

SeatS

Seat Back BraceA beautiful piece! This large brace mounts behind the rear seat back between the rear wheel wells and the floor to the deck filler panel. 1955-57 2-Door Hardtop, Rear ...................................#16178 .............. $239.95/ea.

Seat Back Brace Panel1955-57 Rear, Convertible ..........................................#16652 .............. $249.95/ea.

rear Seat Floor PocketS These install into the rear floor under-seat pan to retain the seat bottom.1955-57 Sedan, 56-57 4-Door Hardtop

........................ #16893 ...... $29.95/pr.

convertiBle rear SeatFloor BracketThese seat brackets weld to the rear under-seat floor pan on convertibles. Requires 2.1955-57 .............. #16887 ......$19.95/ea.

rear Seat Floor moUntS1955-57 4-Door Wgn, Driver

........................ #17390 ......$52.95/ea.1955-57 4-Door Wgn, Passenger

........................ #17391 ......$52.95/ea.

“a” Pillar PanelS with cowlThis repair panel covers the A-pillar to the outer cowl side and also the outer wind-shield post. 1955-56 Hardtop, Driver ..............................................#17899 .............. $449.95/ea.1955-56 Hardtop, Passenger ......................................#17900 .............. $449.95/ea.1955-56 Convertible, Driver ........................................#17901............... $449.95/ea.1955-56 Convertible, Passenger ................................#17902 .............. $449.95/ea.1955-56 Sedan, Driver. ................................................#17903 .............. $449.95/ea.1955-56 Sedan, Passenger .........................................#17904 .............. $449.95/ea.1957 Sedan, Driver ......................................................#17905 .............. $449.95/ea.1957 Sedan, Passenger ..............................................#17906 .............. $449.95/ea.1957 Convertible Driver, Side .....................................#16516 .............. $479.95/ea. 1957 Convertible Passenger, Side .............................#16517 .............. $479.95/ea.

















458

Shee

t Meta

l

Sheet Metal

do

orS

#16066PaSSenGer Side

#16065driver Side

comPlete doorS1955 & 57 Driver, 2-Door Hardtop ............................................................................... #12113 ................................... $849.95/ea.1955 & 57 Passenger, 2-Door Hardtop ....................................................................... #12114 ................................... $849.95/ea.1955 & 57 Driver, Convertible ...................................................................................... #12115 ................................... $849.95/ea.1955 & 57 Passenger, Convertible .............................................................................. #12116 ................................... $849.95/ea.1956 Driver, 2-Door Hardtop........................................................................................ #12117 ................................... $899.95/ea.1956 Passenger, 2-Door Hardtop ................................................................................ #12118 ................................... $899.95/ea.1956 Driver, Convertible .............................................................................................. #12119 ................................... $899.95/ea.1956 Passenger, Convertible ...................................................................................... #12120 .................................. $899.95/ea. 1955-57 Driver, 2-Door Sedan & Wagon, Sedan Delivery (Shown) ......................... #16065 .................................. $689.95/ea.1955-57 Passenger, 2-Door Sedan & Wagon, Sedan Delivery (Shown) .................. #16066 .................................. $689.95/ea.1955 & 57 Driver, 2-Door Hardtop ............................................................................... #16067 .................................. $689.95/ea.1955 & 57 Passenger, 2-Door Hardtop ....................................................................... #16068 .................................. $689.95/ea.1955 & 57 Driver, Convertible ...................................................................................... #16069 .................................. $689.95/ea.1955 & 57 Passenger, Convertible .............................................................................. #16070 .................................. $689.95/ea.
















Sheet Metal

do

orS

FUll door SkinS 1955-57 Driver, 2-Door Hardtop & Conv. (exc. ‘56), Show Quality ............................ #2329 .................................... $229.95/ea.1955-57 Passenger, 2-Door Hardtop & Conv. (exc. ‘56), Show Quality .................... #2330 .................................... $229.95/ea.1955-57 Driver, 2-Door Sedan, Show Quality ............................................................. #2960 .................................... $239.95/ea.1955-57 Passenger, 2-Door Sedan, Show Quality ..................................................... #2961 .................................... $239.95/ea.1956 Driver, 2-Door Hardtop & Convertible, Show Quality ....................................... #2331 .................................... $249.95/ea.1956 Passenger, 2-Door Hardtop & Convertible, Show Quality ............................... #2332 .................................... $249.95/ea.

Inside top rail must be re-used from original door.1955-57 Driver, 2-Door Hardtop & Conv. (exc. ‘56), Driver Quality ........................... #2956 .................................... $199.95/ea.1955-57 Passenger, 2-Door Hardtop & Conv. (exc. ‘56), Driver Quality ................... #2957 .................................... $199.95/ea.1956 Driver, 2-Door Hardtop & Convertible, Driver Quality ...................................... #2958 .................................... $229.95/ea.1956 Passenger, 2-Door Hardtop & Convertible, Driver Quality .............................. #2959 .................................... $229.95/ea.

1955-57 Driver, 2-Door Hardtop, Convertible, except 1956 ....................................... #16079 .................................. $232.95/ea.1955-57 Passenger, 2-Door Hardtop, Convertible, except 1956 ............................... #16080 .................................. $232.95/ea.1955-57 Driver, 2-Door Sedan & Wagon, Sedan Delivery ........................................ #16081 .................................. $299.95/ea.1955-57 Passenger, 2-Door Sedan & Wagon, Sedan Delivery ................................. #16082 .................................. $299.95/ea.

#16079 oUtSide view

#16081 oUtSide view

#16068

#16070

#16067

#16069















460

Shee

t Meta

l

Sheet Metal

do

or r

ela

ted

door adjUStmentS Check clearance around all doors. Clear-ance at top and sides should be 1/16" to 3/16". Clearance at bottom should be 1/8" to 1/4". If the door fit is not within these limits, proceed as follows:

when makinGadjUStmentS, alwayS:• Scribe and remove striker plates and shims to permit door to hang free.

• Support the door when adjusting Hinges.

• Make adjustments at one or both hinges as indicated by the door fit.

• Reseal all hinges and hinge plates as recommended.

• After fitting doors, install and adjust striker plates.

For more information on door alignment and adjustments turn to page 547 to order part #13292 - Body and Convert-ible Top Adjustments Guide, for more detailed instructions.

inSide door handle reinForcementSSpot welds on the inside door skin and provides support for the outside door handle. 1955-57 ........................................................................#11332 .................. $49.95/pr.

door Pillar lower Patch PanelSFits 2-Door hardtops and convertibles.1955-57 Driver .............................................................#1235 .................. $99.95/ea.1955-57 Passenger .....................................................#1236 .................. $99.95/ea.

inner Sheet metal door BottomS Will fit sedan and wagons with minor modifications. Made in the USA.1955-57 2-Door Hardtop & Convertible, Driver .........#2338 .................$149.95/ea.1955-57 2-Door Hardtop & Convertible, Passenger .#2339 .................$149.95/ea.

#2338

door SkinS, lower halF oF door 1955-57 Driver, All 2-Door (Shown) ...........................#2962 .................. $60.95/ea.1955-57 Passenger, All 2-Door ...................................#2963 .................. $60.95/ea.

rear Seat door PanelretainerSThese retainers mount/weld to the inner quarter structure and provide a mounting point for the rear armrests.1955-57 2-Door Hardtop & Convertible

........................ #16104 ...... $13.95/pr.

inSide oF doG leG Patch PanelSThis patch panel repairs the inner quarter jamb area behind the rear door on 4-Door sedan and wagon models. Measures 19" high and will work on all models of 1955-1957 classic Chevy 4-Door sedan and wagons.1955-57 4-Door Sedans and Wagons, Driver Side ...#16261 ................ $32.95/ea.1955-57 4-Door Sedans and Wagons, Psngr Side....#16262 ................ $32.95/ea.












Sheet Metal

#16078 #16077#16075

#16076

do

or r

elated

door jamB reinForcementSCan be used on 2-Door sedans with minor modifications.1955-57 Driver, 2-Door Hardtops,

Convertible .... #10199 ....$159.95/ea.1955-57 Passenger, 2-Door Hardtops,

Convertible ... #10200 ....$159.95/ea.

wire harneSS door Sill coverS 1955-57 2-Door Models ..............................................#10133 .................. $44.95/pr.1955-57 2-Door Sedan Rear .......................................#17607 ................. $31.95/pr.1955-57 4-Door Sedan/Wagon, 4-Piece .....................#17605 ................ $94.95/set1956-57 4-Door Hardtop, 4-Piece ...............................#17606 ................ $94.95/set

door hinGeS1955-57 Driver, Upper or Lower .................................#16075 ................ $84.95/ea.1955-57 Passenger, Upper or Lower .........................#16076 ................ $84.95/ea.

1955-1957 Chevy

1367-Driver1368-Pass 56

1357-Driver1358-Pass

57



55

56


55


56


57

2329-Driver2330-Pass�2960-Driver2961-Pass



55-57 2Dr HT Conv (Full)

55-57 2Dr Sedan (Full)

56 2Dr HT Conv (Full)

55-57 All 2Dr(Lower Half)

55

(Full Quarters)







55 2Dr HT Conv

56 2Dr HT Conv

57 2Dr HT Conv

56

57


2989-Driver2990-Pass 57

(1/2 Quarters)





Sedan-Nomad Wagon

55 2Dr

55-56 2Dr

56-57 4Dr Sedan/Wgn

2338-Driver2339-Pass HT/Conv




253-Driver254-Pass

Conv

2Dr Sedan

4Dr Sedan

2Dr HardTop





55

56

57

Side view




UPPer PillarreinForcementS1955-57 Driver, Sedan, Wagon, Sedan

Delivery .......... #16077 ....$199.95/ea.1955-57 Passenger, Sedan, Wagon,

Sedan Delivery ........................ #16078 ....$199.95/ea.

rear door jamB BraceS1955-57 Driver, 2-Door HT

........................ #17038 ....$149.95/ea.1955-57 Passenger, 2-Door HT

........................ #17039 ....$149.95/ea.

rear door jamBdoG leG rePair PanelSRepairs rust in the lower rear door jamb/quarter area. 14-1/2" tall. Sold in pairs. 1956-57 4-Door Hardtop

........................ #16892 .... $149.95/pr.














462

Shee

t Meta

l

Sheet Metal

12

3

45

6

7

8

9

1011 12

13

14

15

16

17

18

19

20

22

22

232425

26

27

2829

30

See PaGeS 464 and 465For comPlete FloorS, PartS

1. Trunk Splash Panels ...................................................................................318, 318C ..............................................................4772. Trunk Splash Panel Brace ............................................................................. 318A, 12131 ............................................................ 4773. Spare Tire Well ................................................................................................ 317 .......................................................................... 4894. Pass. Side Rear Wheel Well Extensions ....................................................... 2949, 2951,10191 .................................................... 4925. Rear, Rear Wheel Well, Passenger Side ........................................................ 2943, 1709, 1713 ..................................................... 4936. Front, Rear Wheel Well, Passenger Side ...................................................... 2945, 2947, 1706,1710 ....................................................4937. Inner Rocker Panel Brace, Passenger Side ................................................. 1152......................................................................... 4558. Long Center Floor Brace ............................................................................... 1392 ........................................................................ 4719. Original Style Rocker Panel, Passenger Side .............................................. 1832, 1834,10125 .................................................... 45510. Hardtop/Convertible Short Rear Floor Brace, Passenger Side .................. 1385 ........................................................................ 47011. Long Front Floor Brace ................................................................................. 1381, 1382 .............................................................. 47112. Short Floor Brace........................................................................................... 1383 ........................................................................ 47013. Full Half Floor Pan, Passenger Side ............................................................. 1720 ........................................................................ 46614. Front Floor at Cowl Brace, Passenger Side ................................................. 1380 ........................................................................ 47015. Front Floor at Cowl Brace, Driver Side ......................................................... 1379 ........................................................................ 47016. Full Half Floor Pan, Driver Side ..................................................................... 1719 ........................................................................ 46617. Inner Rocker Panel Brace, Driver Side ......................................................... 1151......................................................................... 45518. Short Floor Brace........................................................................................... 1383 ........................................................................ 47019. Original Style Rocker Panel, Driver Side ...................................................... 1831, 1833, 10124 ................................................... 45520. End Section of Long Front Floor Brace, Passenger ................................... 2921 ........................................................................ 470 Driver ........................................... 2920 ....................................................................... 47021. Hardtop/Convertible Rear Floor Brace, Driver Side .................................... 1384 ........................................................................ 47022. End Sections of Long Center Floor Brace ................................................... 2312 (Pass) ........................................................... 470 ........................................................ 2311 (Driver) ........................................................... 47023. Front Rear Wheel Well, Driver Side ............................................................... 2944, 2946, 1706, 1711 ...................................................49324. Rear, Rear Wheel Well, Driver Side ............................................................... 2942, 1708, 1712 ..................................................... 49325. Rear Wheel Well Extensions, Driver Side ..................................................... 2948, 2950, 10190 ................................................... 49226. Full Trunk Floor .............................................................................................. 10490 ...................................................................... 46727. Under Seat Front Floor Pan, Passenger Side .............................................. 2923 ........................................................................ 47228. Front Floor Pan, Driver Side .......................................................................... 237A ....................................................................... 47329. Rear Floor Pan, Driver Side ........................................................................... 238A ....................................................................... 47330. Under Seat Rear Floor Pan, Driver Side ....................................................... 2926 ........................................................................ 472

comPlete Sheet metal aSSemBly

deScriPtion Part# PaGe#

dia

Gra

mS


Sheet Metal

dia

Gra

mS

& 4-Door HT)

464

Shee

t Meta

l

Sheet Metal

#16093

comPlete welded FloorS with BraceS For convertiBle1955-57 ......................................................................................................................... #16092 ..................................$995.00/ea.1955-57 ......................................................................................................................... #12138A ............................. $1,299.95/ea.

#16092

comPlete welded Floor and trUnk with BraceSTo say that these big pieces are impressive is an understatement. These babies cover from the factory seam at the toe boards all the way to the tailpan trunk panel. They include, to name a few, the gas tank mounts and straps, the jack retainer, the spare tire bracket and wire harness retainer clips, the lower trunk latch mount bracket and the spare tire well is installed. Also, the rocker panel braces are welded in and ready go!1955-57 Sedan .............................................................................................................. #16120 ............................... $2,195.00/ea.1955-57 Convertible ..................................................................................................... #16093 ...............................$2,095.00/ea.1955-57 2-Door Hardtop .............................................................................................. #16349 ...............................$2,095.00/ea.

Flo

orS

welded Floor Pan aSSemBlieS with inner rockerSThis hardtop floor pan comes all galvanized and phosphate treated for corrosion resistance and comes with the inner rocker braces. Made in the USA.1955-57 Hardtop ........................................................................................................... #15948 ............................... $1,299.95/ea.1955-57 Convertible ..................................................................................................... #15949 ............................... $1,299.95/ea.1955-57 Sedan .............................................................................................................. #15950 ............................... $1,299.95/ea.










Sheet Metal

Floo

rS

comPlete welded Floor For hardtoPS1955-57 2-Door with Braces .......... #16113 ..........$995.95/ea.1956-57 4-Door with Braces .......... #17306 ......$1,099.95/ea.

comPlete Floor For SedanS and waGonS1955-57 Fully Welded with Braces #16119 ......... $995.00/ea.

comPlete Floor For 2-door hardtoPS1955-57 Fully Welded with Braces #12138B ....$1,299.95/ea.

comPlete Floor For SedanS and waGonS1955-57 Fully Welded with Braces #12138 ......$1,299.95/ea.






466

Shee

t Meta

l

Sheet Metal

FUll lenGth Floor PanS 1955-57 Driver, Hardtop, Convertible ......................................................................... #1719 .................................... $228.95/ea.1955-57 Driver, Hardtop & Convertible ....................................................................... #16097 .................................. $249.95/ea.1955-57 Passenger, Hardtop, Convertible .................................................................. #1720 .................................... $228.95/ea.1955-57 Passenger, Hardtop & Convertible ............................................................... #16098 .................................. $249.95/ea.1955-57 Driver, Sedan/Wagon ..................................................................................... #14251 .................................. $228.95/ea. 1955-57 Driver, Sedan/Wagon ..................................................................................... #16121 .................................. $249.95/ea.1955-57 Passenger, Sedan/Wagon ............................................................................. #14252 .................................. $228.95/ea. 1955-57 Passenger, Sedan/Wagon ............................................................................. #16122 .................................. $249.95/ea.

16121

#16122

#1719

Flo

orS










Sheet Metal

FUll trUnk FloorSHigh quality original gauge full trunk floors. Parts 16188-16190 include tank straps.1955-57 ....................................#10490 .......$379.95/ea.

1955-57 Fully Welded Complete with Spare Tire Well& Braces ................................#12139 .......$698.95/ea.

1955-57 Hardtop & Sedan, Complete with Braces ................................................#16188 .......$729.95/ea.

1955-57 Hardtop & Sedan, with Braces,without Wheel Tub .................#16189 .......$729.95/ea.

1955-57 Convertible, Complete with Braces ................................................#16190 .......$729.95/ea.

1955-57 Full .............................#16191 .......$424.95/ea.

#16188

#16189

#16190

#16191

#10490

Floo

rS







468

Shee

t Meta

l

Sheet Metal

Flo

orS

narrowed trUnk Floor with BraceS with wider wheel tUBS kitThis kit includes the factory style mini-tubs #17018 saving you even more money. Trunk floor has already been modified and flanged to accept mini-tubs saving you again time and money. Spare tire well is deleted. Fits Non-Wagon bodystyles including convertible. Allows use of 13” wide tires when used with leaf spring pocket kit.1955-57 ......................................................................................................................... #17278 ................................$1,079.95/kit

trUnk Floor with BraceS For wider wheel tUBSFor use with factory style mini-tubs #17018. Trunk floor has already been modified and flanged to accept mini-tubs. Spare tire well is deleted. Fits Non-Wagon bodystyles including convertible. Allows use of 13" wide tires when used with leaf spring pocket kit.1955-57 Floor Only....................................................................................................... #17277 .................................. $729.95/ea.




Sheet Metal

Floo

r Pa

nS

FUll FloorS with BraceS & SPare tire delete trUnk Floor1955-57 Hardtop ........................................................................................................... #17435 ............................... $2,099.95/ea.1955-57 Sedan .............................................................................................................. #17436 ............................... $2,099.95/ea.



470

Shee

t Meta

l

Sheet Metal

Flo

or B

ra

ceS

Floor to cowl BraceSThis complete lower inner foot braces the inner dash kick panel area down to the front corners of the front floor pans. Made in the USA.1955-57 Driver, ‘55 All, ‘56-’57 Conv.

........................ #2918 ........$98.95/ea.1955-57 Psngr, ‘55 All, ‘56-’57 Conv.

........................ #2919 ........$98.95/ea.

#2920-2921BraceSMade in the USA.1955-57 Floor, Short Front, Driver (End for #1381 & #1382) (Shown)......................................................................................#2920 .................. $68.95/ea.1955-57 Floor, Short Front, Passenger (End for #1381 & #1382)......................................................................................#2921 .................. $68.95/ea.

oUter center Floor BraceSThese are the end sections of part #1392, shown on next page. Made in the USA.1955-57 Driver ... #2311 ........$69.95/ea.1955-57 Passenger

........................ #2312 ........$69.95/ea.

Short rear Floor BraceS1955-57 Driver, Hardtop & Convertible ......................#1384 .................. $34.95/ea.1955-57 Passenger, Hardtop & Convertible ..............#1385 .................. $34.95/ea.1955-57 Driver, Hardtop & Convertible ......................#16099 ................ $29.95/ea.1955-57 Passenger, Hardtop & Convertible ..............#16100 ................ $29.95/ea.

#16099

#16100 #1384 & #1385

Front Floor at cowl BraceS1955-57 Driver .............................................................#1379 .................. $62.95/ea.1955-57 Passenger .....................................................#1380 .................. $62.95/ea.1955-57 Driver .............................................................#16095 ................ $59.95/ea.1955-57 Passenger .....................................................#16096 ................ $59.95/ea.

#16095

#16096#1379 & #1380

Short Floor BraceSEither side, 2 required. 1955-57 .............. #1383 ........$34.95/ea.1955-57 .............. #16102 ......$35.95/ea. Seat riSer to “B” Pillar SUPPort BraceS

This is the support brace that reinforces the connection between the “B” pillar support brace and the seat riser. 1955-57 Driver .............................................................#16481 .................$19.95/ea. 1955-57 Passenger .....................................................#16482 .................$19.95/ea.























Sheet Metal

Floo

r Br

aceS

Floor Under Seat BraceS1955-57 Driver .............................................................................................................. #1377 ...................................... $34.95/ea.1955-57 Passenger ...................................................................................................... #1378 ...................................... $34.95/ea.1955-57 Driver .............................................................................................................. #16117 ..................................... $39.95/ea.1955-57 Passenger ...................................................................................................... #16118 ..................................... $39.95/ea.

FUll Floor BraceMounts at rear shock mounts 47"L x 5.5"W x 2"H Made in the USA.1955-57 Wagon, Rear ................................................................................................... #15520 .................................. $178.95/ea.

#16116

#16103

#16094

#16117

#16118

#1381

lonG Front Floor BraceS1955-57 All Models exc. Convertible and 4-Door Hardtop ........................................ #1381 .................................... $139.95/ea.1955-57 All Models exc. Convertible and 4-Door Hardtop ........................................ #16116 ................................... $159.95/ea.1955-57 Convertible ..................................................................................................... #1382 .................................... $198.95/ea.1955-57 Convertible ..................................................................................................... #16103 .................................. $189.95/ea.

#1392

lonG center Floor BraceS1955-57 ......................................................................................................................... #1392 .................................... $139.95/ea.1955-57 ......................................................................................................................... #16094 .................................. $159.95/ea.

#1378

#1377

main Floor center Brace This is the main center brace that mounts where the center door pillar and is often rust damaged.1956-57 4-Door Hardtop .............................................................................................. #16876 .................................. $299.95/ea.













472

Shee

t Meta

l

Sheet Metal

Flo

or r

ela

ted

Under Seat rear Floor PanS 1955-57 Driver ............................... #2926 .............$78.95/ea.1955-57 Passenger ........................ #2927 .............$78.95/ea.

Under Seat Front Floor PanS1955-57 Driver .............................................................................................................. #2922 ...................................... $64.95/ea.1955-57 Passenger ...................................................................................................... #2923 ...................................... $64.95/ea.

rear Floor Seat SUPPortSThe rear floor seat supports are located just behind the rear floor pans. These important structural members should not be neglected when removing rusted steel. Dimensions of part #1787 and #1787A are 25-5/8" x 3-3/8" x 3”. Dimensions of parts #1788 and #1789 are 24" x 3-3/8" x 3".1955-57 Driver, exc. Convertible ... #1787 .............$59.95/ea.1955-57 Passenger, exc. Convertible......................................................... #1787A...........$59.95/ea.1955-57 Driver, Conv. ..................... #1788 .............$64.95/ea.1955-57 Passenger, Conv. ............. #1789 .............$64.95/ea.1955-57 Driver Side, Hardtop ........ #16114 ............$59.95/ea.1955-57 Passenger Side, Hardtop #16115 ............$59.95/ea.1955-57 Driver, Convertible ........... #16105 ...........$62.95/ea.1955-57 Passenger, Convertible ... #16106 ...........$62.95/ea.

rear Floor reinForcementSAfter replacing the rear floor sections, these panels are welded into position for added strength at the body-to-frame mount po-sition. Adding these structural parts is an important step in the floor replacement operation. Dimensions are 10-3/8" x 18" x 7/8". 1955-57 Driver ................................ #1785 .............$48.95/ea.1955-57 Passenger ........................ #1786 .............$54.95/ea.1955-57 Driver, Hardtop & Conv. .. #16107 ...........$52.95/ea.1955-57 Psngr, Hardtop & Conv. ... #16108 ...........$52.95/ea.

#16108

#1785

#16114

#16115

#16105

#16106#1788-1789

kick Panel retainerThese are welded to the toe boards next to the kick panel area and holds the lower edge of the kick panel. For both driver and passenger sides. Made in the USA. 1955-57 On Floor ........................... #2954 .............$19.95/ea.

tranSmiSSion center PanelFits all models. If you’re restoring your car to sport the original transmission or just want to make your floor as safe as pos-sible, this is the ideal panel. Dimensions are 20" x 36". Made in the USA.1955-57 ........................................... #185 ...............$99.95/ea.




















Sheet Metal

Front Floor PanSWhen the rust has taken over this is the only solution! Sold separately or in pairs. They fit all models, although some may require minor modification. Dimensions are 24" x 19". Made in the USA.1955-57 Driver & Passenger ......................................#237 ................... $108.95/pr.1955-57 Driver .............................................................#237A .................. $62.95/ea.1955-57 Passenger .....................................................#237B .................. $62.95/ea.

rear Floor PanSUnfortunately, rust does not restrict itself to the front floor pans. These rear pans are easily welded in. Some may require minor modification. Dimensions are 28" x 22". 1955-57 Driver & Passenger, exc. Convertible ..........#238 ................... $143.95/pr.1955-57 Driver, except Convertible ............................#238A ...................$81.95/ea.1955-57 Passenger, except Convertible ....................#238B ...................$81.95/ea.

Floo

r r

elated

convertiBle rear Floor PanSMade in the USA.1955-57 Driver (Shown) ..............................................#2924 .................$104.95/ea.1955-57 Passenger .....................................................#2925 .................$104.95/ea.

rear BodymoUnt acceSS PlUGSFor those doing frame-off restorations or just checking the condition of the body mount grommets, those original access plugs often won’t survive the operation! Replace them with these quality rubber plugs.1955-57 .............. #812 ............ $8.95/pr.

Floor Pan PlUGFor those replacing their floor pans or just replacing those old rubber parts, this plug is a necessity. Molded in tough rubber to last for years. 4 per car.1955-57 .............. #813 ............$2.50/ea.




inner Side rePair PanelSThese panels meet with the bottom of the floor below the quarter windows. Fits 2-door hardtop only. Made in the USA.1955-57 Driver .............................................................#2938 .................. $59.95/ea.1955-57 Passenger .....................................................#2939 .................. $59.95/ea.

dimmer Switch moUnt Plate1957 .................... #12133 .....$32.95/ea.














474

Shee

t Meta

l

Sheet Metal

trU

nk

rel

ate

d

14

1. Side 10" Trunk Floor Section, Driver Side ...................................................2770 .................................................................... 475

2. Trunk, Rear Section, Splash Panel & Brace ................................................318A, 318B, 318 ...........................................475, 477

3. Trunk Floor Center Section ............................................................................ 1234 ........................................................................475

4. Trunk Floor Plate ............................................................................................. 2940 ........................................................................475

5. Spare Tire Well ................................................................................................. 317 ..........................................................................489

6. Side 10" Trunk Floor Section, Passenger Side.............................................. 2771 ..............................................................................475

7. Body Mount Reinforcement, Passenger Side ............................................... 1791 ........................................................................474

8. Lower Trunk Lid Hinge Support Braces ........................................................ 1700 ........................................................................479

9. Rear Backrest Support Panel ......................................................................... 2574 ........................................................................494

10. Convertible Top Motor Cover .......................................................................... 319 ..........................................................................494

11. Convertible Top Motor Support Panel ............................................................ 10008 ......................................................................495

12. Rear Window to Trunk Panel ........................................................................... 1716 ........................................................................488

13. Inner Wheel Well .............................................................................................. 2759 ........................................................................492

14. Rear Inner Quarter Panel, Driver .................................................................... 1717 ........................................................................483

15. Upper Quarter Panel ........................................................................................ 11328-29 .................................................................481

16. Tailpan to Quarter Panel (Partial) ................................................................... 1704, 1705, 10019 ...................................................477

trUnk area diaGram(Convertible Trunk Shown)

16

1

2

13

4

3

12

1110

5

6

7

9 815

deScriPtion Part# PaGe#

toe Board Floor PanS1955-57 Driver ................................ #2952 .............$72.95/ea.1955-57 Passenger ........................ #2953 .............$72.95/ea.

Body moUnt reinForcementSSimilar to the rear floor reinforcement, the body mount reinforce-ments are located at the rear of the body and are the structural points for mounting the body to the frame. Eliminate years of rust by replacing these supports.1955-57 Driver, Convertible ........... #1790 .............$44.95/ea.1955-57 Passenger, Convertible ... #1791 .............$44.95/ea.1955-57 Driver, Rear ....................... #15665 ..........$49.95/ea.1955-57 Passenger, Rear ............... #15666 ...........$49.95/ea. 1955-57 Driver ................................ #16109 ...........$49.95/ea.1955-57 Passenger ........................ #16110 ............$49.95/ea.

#16109#1790 & 1791










Sheet Metal

trU

nk

rela

ted

rear window to trUnk Panel BraceSFor convertiBleSSupports the rear window to trunk panel.1955-57 Driver ................................ #1714 ........... $114.95/ea.1955-57 Passenger ........................ #1715 ........... $114.95/ea.

trUnk Floor PlateTwo required per car.1955-57 ........................................... #2940 .............$28.95/ea.

UPPer trUnk Floor Shock SUPPortSIf this vulnerable section of your trunk floor rusts out you could be in for a surprise. Installing these shock supports will return the strength to your trunk floor so that it can bear the load it was designed to. Dimensions are 13" x 11". See part #950 in the Steering and Suspension section for steel frame shock supports. Fits hardtops and sedans. Made in the USA.1955-57 Driver ................................ #1441 .............$78.95/ea.1955-57 Passenger ........................ #1442 ............. $67.95/ea.

lower trUnk Floor Shock SUPPortSParts #2761 & #2762 should be used in conjunction with parts #1441 & #1442. Parts #1441 & #1442 are what you see when you are looking inside the trunk, while parts #2761 & #2762 are seen when looking up from the underside of the car. Parts #10186 and #10187 fit Nomads, wagons and sedan delivery models. Made in the USA.1955-57 Driver, exc. Wagon & Nomad......................................................... #2761 .............$64.95/ea.1955-57 Passenger, exc. Wagon & Nomad......................................................... #2762 .............$64.95/ea.1955-57 Driver ................................ #10186............$74.95/ea.1955-57 Passenger ........................ #10187............$74.95/ea.

trUnk Floor center SectionThis high-quality stamping is identical to the original in dimen-sion and contour. Drops into the trunk in place of the corroded or rusted original. Dimensions are 34" x 35". Fits all models except wagons. Made in the USA.1955-57 ........................................... #1234 ........... $114.95/ea.

Side 10-inch trUnk Floor SectionS1955-57 Driver ............................... #2770 .............$79.95/ea.1955-57 Passenger ........................ #2771 .............$79.95/ea.

trUnk Floor rear SectionThis is the rear portion of the trunk, approximately 10" x 54" in size. Fits all models except wagons. Made in the USA.1955-57 ........................................... #318B.............$99.95/ea.














476

Shee

t Meta

l

Sheet Metal

#16173

#16174

trUnk Floor center reinForcementSAttaches to the underside of the rear floor in front of the shock mounts.1955-57 Hardtop, Convertible ..................................................................................... #2941 .......................................$57.95/ea.1955-57 Hardtop/Convertible ...................................................................................... #16112 ..................................... $52.95/ea.

#2941

#16112

#2935

#2930 & #2931

#2937

#11330

#2928

#2933

trUnk Patch PanelS1955 Outer Trunk to Quarter Panel, Partial, Driver, exc. Nomad & Wagon .............. #2928 ...................................... $89.95/ea.1955 Outer Trunk to Quarter Panel, Partial, Passenger, exc. Nomad & Wagon ....... #2929 ...................................... $89.95/ea.1955 Outer Trunk to Quarter Panel, Full, Driver, exc. Nomad & Wagon ................... #11330................................... $189.95/ea.1955 Outer Trunk to Quarter Panel, Full, Passenger, exc. Nomad & Wagon ........... #11331................................... $189.95/ea.1955 Full Trunk to Quarter Panels, Driver .................................................................. #16168 .................................. $179.95/ea.1955 Full Trunk to Quarter Panels, Passenger .......................................................... #16169 .................................. $179.95/ea.1956 Quarter Panel to Undertail Panel Patches, Driver ........................................... #16170 .................................... $99.95/ea.1956 Quarter Panel to Undertail Panel Patches, Passenger .................................... #16171 .................................... $99.95/ea.1956 Quarter Panel to Undertail Panel Patches, Driver & Passenger ..................... #16172 ...................................$189.95/pr.1957 Outer Trunk to Quarter Panel, Driver (For Partial See Part #1704) .................. #2930 .................................... $159.95/ea.1957 Outer Trunk to Quarter Panel, Driver ................................................................. #16173 .................................. $166.95/ea.1957 Outer Trunk to Quarter Panel, Passenger (For Partial See Part #1705) .......... #2931 .................................... $159.95/ea.1957 Outer Trunk to Quarter Panel, Passenger ......................................................... #16174 ................................... $166.95/ea.1957 Outer Trunk to Quarter Panel, Driver & Passenger .......................................... #16175 ...................................$299.95/pr.1955-57 Trunk Wall Corner, Inner, Driver (Behind Taillight Area in Trunk) ............... #2932 ...................................... $34.95/ea.1955-57 Trunk Wall Corner, Inner, Passenger (Behind Taillight Area in Trunk) ....... #2933 ...................................... $34.95/ea.1955-57 Wheelhouse, Inner, Driver, Hardtop & Conv. (Lower Rear Corner Section)....................................................................................................................................... #2934 ...................................... $44.95/ea.1955-57 Wheelhouse, Inner, Passenger, Hardtop & Conv. (Lower Rear Corner Section)....................................................................................................................................... #2935 ...................................... $44.95/ea.1955-57 Wheelhouse, Inner, Driver, Convertible (Lower Half of Inner Trunk Wall) .. #2936 ...................................... $54.95/ea.1955-57 Wheelhouse, Inner, Psngr, Convertible (Lower Half of Inner Trunk Wall) .. #2937 ...................................... $54.95/ea.

trU

nk

rel

ate

d

#16168
























Sheet Metal

trUnk SPlaSh PanelSTrunk splash panel dimensions for the hardtop and sedan are 45-3/4" x 5-1/2"; Nomad and wagon dimensions are 46-3/8" x 7-1/2". Made in the USA.1955-57 Hardtop, Sedan, Convertible ......................................................................... #318 ........................................ $89.95/ea.1955-57 Nomad, Wagon, Sedan Delivery ................................................................... #318C .................................... $109.95/ea.

Trunk splash panel dimensions for the hardtop and sedan are 45-3/4" x 5-1/2".1955-57 Hardtop, Sedan, & Convertible ..................................................................... #16186 .................................... $74.95/ea.

trUnk SPlaSh Panel BraceSThis rear body support is the structure behind the trunk splash panels (#318 & #318C above). Made in the USA.1955-57 exc. Wagon ..................................................................................................... #318A .....................................$115.95/ea.

This rear body support is the structure behind the trunk splash panels.1955-57 exc. Wagon ..................................................................................................... #16187 .................................. $129.95/ea.

318a

16187

trU

nk

rela

ted

tailPan to QUarter PanelS, Partial Sheet metal Fits all models except wagon and Nomad. Made in the USA.1957 Driver ..................................................................#1704 .................$118.95/ea.1957 Passenger ...........................................................#1705 .................$118.95/ea.1956 Driver ..................................................................#10019 ................$154.95/ea.1956 Passenger ...........................................................#10020 ...............$154.95/ea.


http://www.danchuk.com/ItemForm.aspx?Item=318C








478

Shee

t Meta

l

Sheet Metal

#16196

#16197

comPlete trUnk lid aSSemBlieSParts #14206 and #14152 fit all passenger models and their components are die formed on electro-galvanized steel and phosphate treated, so they’re ready to paint right out of the box. 1955-56 ......................................................................................................................... #14206 .................................. $849.95/ea.1955-56 w/out Holes .................................................................................................... #16196 .................................. $589.95/ea.1957 ............................................................................................................................... #14152 .................................. $849.95/ea.1957 w/out Holes ......................................................................................................... #16197 .................................. $589.95/ea.

#14152

trU

nk

rel

ate

d






Sheet Metal

oUter trUnk lidSOne too many dents and/or the ravages of rust can spoil the external beauty of your trunk. Give it a facelift with new skin. Welds to the existing trunk lid framework. Inner framework is not available. See complete trunk lid assemblies at left.1955-56 w/ Holes .......................................................................................................... #2769 .................................... $378.95/ea.1957 w/ Holes ............................................................................................................... #2980 .................................... $378.95/ea.1955-57 Replacement, No Holes ................................................................................. #2768 .................................... $339.95/ea.

trUnk inner lid Panel1955-57 ......................................................................................................................... #2573 .................................... $139.95/ea.

convertiBle lower trUnk lidhinGe SUPPort BraceS1955-57 Driver ................................ #1700 .............$58.95/ea.1955-57 Passenger ........................ #1701 .............$58.95/ea.

lower trUnk latch moUnt BracketS1955-57 ........................................... #12132 ...........$54.95/ea.1955-57 ........................................... #16195 ...........$32.95/ea.

trU

nk

rela

ted

rear endSnUBBer BracketRubber bumper included, this bracket welds to the underside of the floor right above the differential, if you need it we’ve got it.1955-57 w/Rubber..................#16101 ....... $28.95/ea.










480

Shee

t Meta

l

Sheet Metal

QU

arte

r P

an

elS

#16154

#16155

#16157

#2575

#2577


Sheet Metal

QUarter PanelSStamped in heavy gauge steel by an experienced automotive stamper, with a fit and finish restorers can be proud of. The panels labeled with the “GS” logo are a factory style panel that includes the door jamb and continues to the trunk area which means less parts to buy. The American flag labeled panels are more of a skin/large patch panel. Due to the size of these parts, all must be shipped by truck freight. Photos on page 480.1955 2-Door Hardtop & Convertible, Driver, w/Holes ................................................ #2575 .................................... $698.95/ea.1955 2-Door Hardtop & Convertible, Passenger, w/Holes ........................................ #2576 .................................... $698.95/ea.1955 2-Door Hardtop & Convertible, Driver, w/out Holes ......................................... #2981 .................................... $698.95/ea.1955 2-Door Hardtop & Convertible, Passenger, w/out Holes ................................. #2982 .................................... $698.95/ea.1955 Nomad, Driver ..................................................................................................... #11335................................... $849.95/ea.1955 Nomad, Passenger ............................................................................................. #11336................................... $849.95/ea.1956 2-Door Hardtop & Convertible, Driver, w/out Holes ......................................... #2983 .................................... $698.95/ea.1956 2-Door Hardtop & Convertible, Passenger, w/out Holes ................................. #2984 .................................... $698.95/ea.1956 2-Door Hardtop & Convertible, Driver, w/ Holes ............................................... #2579 .................................... $739.95/ea.1956 2-Door Hardtop & Convertible, Passenger, w/ Holes ....................................... #2580 .................................... $739.95/ea.1957 2-Door Hardtop & Convertible, Driver ............................................................... #2577 .................................... $699.95/ea.1957 2-Door Hardtop & Convertible, Passenger ....................................................... #2578 .................................... $699.95/ea.1957 2-Door Hardtop & Convertible, Driver, w/out Holes ......................................... #2985 .................................... $695.95/ea.1957 2-Door Hardtop & Convertible, Passenger. w/out Holes ................................. #2986 .................................... $695.95/ea.1957 2-Door Hardtop, Driver, w/ Holes ....................................................................... #16154* ................................. $779.95/ea.1957 2-Door Hardtop, Passenger, w/ Holes ............................................................... #16155* ................................. $779.95/ea.1957 Convertible, Driver, w/ Holes .............................................................................. #16156* ................................. $829.95/ea.1957 Convertible, Passenger, w/ Holes ...................................................................... #16157* ................................. $829.95/ea.1955 2-Door Sedan, Driver, w/ Window Frame ........................................................... #16152* ................................. $799.95/ea.1955 2-Door Sedan, Passenger, w/ Window Frame ................................................... #16153* ................................. $799.95/ea.1957 2-Door Sedan, Driver, w/ Window Frame ........................................................... #16158* ................................. $829.95/ea.1957 2-Door Sedan, Passenger, w/ Window Frame ................................................... #16159* ................................. $829.95/ea.1955 2-Door Hardtop, Driver without Trim Holes ....................................................... #16956* ................................. $839.95/ea.1955 2-Door Hardtop, Passenger without Trim Holes ............................................... #16957* ................................. $839.95/ea.1955 Convertible, Driver without Trim Holes ............................................................. #16958* ................................. $839.95/ea.1955 Convertible, Passenger without Trim Holes ..................................................... #16959* ................................. $839.95/ea.*Note: These are a full factory style quarter panel from factory weld to factory weld which includes the door jamb, outer part of the trunk channel and they wrap around the rear taillight area.

QU

arter

Pan

elS

convertiBle UPPer QUarter PanelS1955 Driver ..................................................................#15212 .............. $259.95/ea. 1955 Passenger ...........................................................#15213 .............. $259.95/ea.1957 Driver (Shown) ...................................................#11328 ............... $249.95/ea.1957 Passenger ...........................................................#11329 ............... $249.95/ea.

lower SectionQUarter PanelS1955 Factory Type, Driver

........................ #2987 ......$459.95/ea.1955 Factory Type, Passenger

(Shown) ......... #2988 ......$459.95/ea.

#2989#2990

rear FUll QUarter SectionS1957 4-Door Sedan, Driver ......................................................................................... #2989 .................................... $149.95/ea.1957 4-Door Sedan, Passenger ................................................................................. #2990 .................................... $149.95/ea.





































482

Shee

t Meta

l

Sheet Metal

comPlete inner QUarter PanelSThese gorgeous parts cover from the rear of the door all the way back to the trunk opening. These parts include the complete inner wheelhouse, complete outer wheelhouse and extension plus the outer wheel well to quarter support. 1955-57 Sedan, Driver .................................................................................................. #16162 .................................. $695.95/ea.1955-57 Sedan, Passenger .......................................................................................... #16163 .................................. $695.95/ea.1955-57 Hardtop, Driver, w/ Wheelhouse Ext ............................................................. #16164 .................................. $695.95/ea.1955-57 Hardtop, Passenger, w/ Wheelhouse Ext ..................................................... #16165 .................................. $695.95/ea.1955-57 Convertible, Driver, w/ Wheelhouse Ext ....................................................... #16166 .................................. $695.95/ea.1955-57 Convertible, Passenger, w/ Wheelhouse Ext ............................................... #16167 .................................. $695.95/ea.

#16165oUtSide

#16165inSide

QU

arte

r P

an

elS

Show QUality lower Front QUarter PanelSThese USA made patch panels are made from new tooling assuring clean accurate lines making your repair job go that much faster and easier.1955 Driver, 2-Door .....................................................#17692 ...............$149.95/ea.1955 Passenger, 2-Door ............................................#17693 ...............$149.95/ea.










Sheet Metal

QU

arter

Pan

elS

convertiBle inner QUarter PanelSBattling the outside elements can really take a toll on your convertible. We have exact duplicates of the original rear inner quarter panels available. Made of high-quality heavy gauge steel. Consists of the section next to the rear seat area to over the top of the inner rear wheel well housing (with a cutout for the window access cover). Use with the rear inner wheel housings parts #2759 and #2760 shown on page 492, and you will have restored two-thirds of your convertible’s inner quarter. Made in the USA.1955-57 Driver, Front .................................................................................................... #2637 .................................... $299.95/ea.1955-57 Passenger, Front ............................................................................................ #2638 .................................... $299.95/ea.1955-57 Driver, Rear .................................................................................................... #1717 .................................... $249.95/ea.1955-57 Passenger, Rear ............................................................................................. #1718 .................................... $249.95/ea.

#2638#2637

Factory Style QUarter PanelSThese 4-door hardtop full quarters have not been available until now, and they are just like they came from the factory...they cover from lead line to lead line to lead line. Will work on 1957 Chevy 4-door hardtops. Truck freight shipping is required. 1957 4-Door Hardtop, Driver Side w-Holes ............................................................... #17016 .................................. $779.95/ea.1957 4-Door Hardtop, Passenger w-Holes ................................................................ #17017 .................................. $779.95/ea.

metal rear armreSt aSSemBly1955-57 2-Door Hardtop ................ #10439 ......... $284.95/pr.








484

Shee

t Meta

l

Sheet Metal




QU

arte

r P

an

elS

rear QUarter, lower Front Patch PanelSDimensions are as follows: the 1955 is 45" x 19", the 1956 is 45" x 19", and the 1957 is 38" x 18". Show quality pieces require less work to install and feature cleaner detail. Made in the USA.1955 Driver, exc. Nomad & 4-Door .............................................................................. #1373 ...................................... $79.95/ea.1955 Passenger, exc. Nomad & 4-Door ...................................................................... #1374 ...................................... $79.95/ea.1955 Driver, 2-Door, Show Quality .............................................................................. #17692 .................................. $149.95/ea.1955 Passenger, 2-Door, Show Quality ..................................................................... #17693 .................................. $149.95/ea.1956 Driver, exc. 4-Door, Show Quality ...................................................................... #1375 .................................... $149.95/ea.1956 Passenger, exc. 4-Door, Show Quality .............................................................. #1376 .................................... $149.95/ea.1957 Driver, exc. 4-Door............................................................................................... #1390 ...................................... $79.95/ea.1957 Passenger, exc. 4-Door ....................................................................................... #1391 ...................................... $79.95/ea.1957 Driver, 2-Door, Show Quality .............................................................................. #1390A .................................. $149.95/ea.1957 Passenger, 2-Door, Show Quality ...................................................................... #1391A .................................. $149.95/ea.

#1374#1373

#1390a#1391a

rear QUarter Paneldoor jamB Patch PanelSThis is door jamb fits the 4-door hardtops only and covers from the stricker plate mount down to the rocker panel. This patch panel repairs the quarter panel/door jamb area. Will work on 1956-1957 Chevy 4-door hardtop.1956-57 Driver ................................ #16985 .........$139.95/ea.1956-57 Passenger ........................ #16986 .........$139.95/ea.

GaSSer Bodywheel well oPeninG Patch Panel kit 1955 ................................................. #17989 ......... $164.95/kit















Sheet Metal

tailPan toQUarter Filler PanelSWelds to the bottom of the quarter panel.Made in the USA.1955 .................... #11327 ...... $44.95/pr.

rear QUarter, lower rear Patch PanelSThe lower rear portion of the rear fender is one of the most rust-prone parts of the car body. Cut that cancer out and transplant in new life with these patch panels! The dimensions are as follows: the 1955 is 45" x 19", the 1956 is 61" x 19", and the 1957 is 59" x 16". Made in the USA.1955 Driver exc. Nomad ..............................................#1369 .................. $75.95/ea.1955 Passenger exc. Nomad ......................................#1370 .................. $75.95/ea.1956 Driver ..................................................................#1371 ...................$74.95/ea.1956 Passenger ...........................................................#1372 ...................$74.95/ea.1957 Driver ..................................................................#1388 .................. $79.95/ea.1957 Passenger ...........................................................#1389 .................. $79.95/ea.

1369

#1370

1371

#1372

#1388

#1389

QUarter Panel and rear BUmPer reinForcementSWelds to inside of quarter panel where the bumper end bracket bolt goes. Made in the USA.1955 .................... #11333 ...... $44.95/pr.

#1369

#1371

QU

arter

Pan

elS

Fender, rear QUarter to rear BUmPer BraceSThese small braces attach to the lower rear quarter panel and to the rear quarter bum-per brackets. They keep the long fender panels in place. This is a very important part to have on your car and it is missing a lot of the time. Every 56 Chevy needs a set, all models. Part #15030 Made in the USA.1956 Best ........... #15030 ......$49.95/ea.1956 Good, w/Screws............................ #17689 ......$29.95/ea.

#17689

#15030











486

Shee

t Meta

l

Sheet Metal

carG

o F

loo

r

carGo FloorMade in the USA. 1955-57 Nomad, Wagon, Sedan Delivery......................................................... #10182..........$158.95/ea.

carGo Floor extenSion2 required. Made in the USA.1955-57 Nomad, Wagon, Sedan Delivery......................................................... #10183............$38.95/ea.

carGo Floor trim ScrewS1955-57 Nomad, Wagon 156-Piece #15427 ......... $16.95/set

carGo Floor1955-57 Nomad, Wagon, Sedan Delivery......................................................... #17294 .........$154.95/ea.

carGo FloorextenSionS1955-57 Left Hand, Nomad,Wagon ..#17292 .... $39.95/ea.1955-57 Right Hand, Nomad,Wagon ..#17293 .... $39.95/ea.

carGo Floor with BraceS & extenSion1955-57 without Spare Tire Well .... #17291 .........$679.95/ea.

carGo FloorShock SUPPortS1955-57 Lower, Driver..............#17296 .... $58.95/ea.1955-57 Lower, Passenger..............#17297 .... $58.95/ea.

carGo Floor comPlete1955-57 with Braces, with Extensions & Spare Tire Well......................................................... #17207 ......$1,159.95/ea.












Sheet Metal

ro

oFhardtoP rooF Panel

Yes, you’re seeing what you think you’re seeing. This large panel covers from the top of the windshield all the way back to the top of the back glass.1955-57 ........................................... #16179 .........$599.95/ea.

hardtoP rooF Panel Frame with BraceS1955-57 ........................................... #16961 .........$699.95/ea.

Sedan rooF Panel1955-57 ........................................... #17289 .........$569.95/ea.

#16179

#17289

#16084

#16083

driP railSAlso referred to as rain gutters, these pieces are what you need if your originals have seen too much water over the years.1955-57 Hardtop, Driver ............................................................................................... #16083 .................................... $74.95/ea.1955-57 Hardtop, Passenger ....................................................................................... #16084 .................................... $74.95/ea.1955-57 Sedan, Driver. ................................................................................................. #17388 .................................... $82.95/ea.1955-57 Sedan, Passenger. ......................................................................................... #17389 .................................... $82.95/ea.

oUter wheel hoUSe with extenSion1956-57 Hardtop, Driver......................................................... #17909 ......... $141.95/ea.1956-57 Hardtop, Passenger......................................................... #17910 ......... $141.95/ea.

Sedan rooF Brace kit1955-57 5-Pieces ............................ #17897 ......... $379.95/kit

rooF BraceSThis is a complete 3-piece brace set. It comes with thecenter dome light bracket, the inner and outer braces frontand rear all welded in and ready to go.1955-57 Hardtop ............................. #16180 ........ $449.95/set












488

Shee

t Meta

l

Sheet Metal

#16062 toP view

window reinForcement Brace1955-57 ......................................................................................................................... #12229 .................................... $58.95/ea.

rear window GaSket channelThe bottom of your rear window seal sits here and is definitely required if you replace the rear deck pillar.1955-57 Bottom ............................................................................................................ #16064 .................................... $59.95/ea.

#16060

#16061

rear window to trUnk PanelS1955-57 Convertible ....................... #1716 ...........$158.95/ea.1955-57 2-Door Hardtop ................ #12228 .........$149.95/ea.

This comprehensive part includes the trunk to window panel along with the package tray which runs from the window to the seat back. Comes with the brace attached. 1955-57 Hardtop, w/ Package Tray #16060 .........$259.95/ea.

This is the panel that runs from the trunk area to under the rear window. 1955-57 Convertible ....................... #16061 .........$109.95/ea.

This great part covers from the trunk to the seat back and comes with the brace attached.1955-57 Sedan ................................ #16063 .........$259.95/ea.

#1716

#16063

PackaGe ShelF Panel with Back GlaSS FlanGe1955-57 Sedan .............................................................................................................. #17434 .................................. $299.95/ea.

convertiBle rear window Brace aSSemBlyOnly available as 2 sections before now, make life a little easier with this one-piece rear window brace assembly. 1955-57 ........................................... #16062 .........$259.95/ea.

rea

r w

ind

ow











Sheet Metal

SPare tire well UPPer Patch1955-57 Nomad/Wagon ................. #17206 .........$129.95/ea.

SPare tire well extenSion kit1955-57 Nomad, Wagon ................. #17290 ........... $89.95/kit

lower SPare tire well1955-57 Nomad, Wagon, Sedan Delivery......................................................... #17295 .........$199.95/ea.

comPlete SPare tire well1955-57 Nomad/Wagon ................. #17205 .........$419.95/ea.

lower SPare tire well 1955-57 Nomad, Wagon, Sedan Delivery......................................................... #10181..........$204.95/ea.

SPare tire well coverIf you are looking to remove your spare tire well to make more room, we’ve got just the part. Welds in.1955-57 ........................................... #12189 .......... $81.95/ea.

SPare tire wellSFits all models except wagons and sedan delivery. Easily welded into place of your old tire well. Dimensions are 10-1/2" x 29-1/4". Made in the USA.1955-57 ........................................... #317 ...............$99.95/ea.1955-57 ........................................... #16192 ........... $87.95/ea.

#317

#16192

#10181

SPare tir

e









490

Shee

t Meta

l

Sheet Metal

tailGate SkinSLook no more. Nomad tailgate skins are now available for you restoration needs. Stop trying to repair or patch together damage original sheetmetal and save time doing it with a new skin.1955-57 Nomad . #14941 ....$329.95/ea.1955-57 Nomad . #17779 ....$299.95/ea.1955-57 Wagon .. #14649 ...$229.95/ea.1955-57 Wagon .. #17280 ....$169.95/ea.

nomad tailGate aSSemBly1955-57 .............. #17960 ....$899.95/ea.

waGon/nomadtailGate hinGe trimFinishes the raw edge of the tailgate skin at the lower hinges. Snaps in as original.1955-57 .............. #16889 ...... $59.95/pr.

tail

Ga

te

waGon tailGate aSSemBly 1955-57 Exc. Nomad............................ #17279 ....$649.95/ea.

#17279

#14649

#17779









Sheet Metal

waGon tailPan to QUarter Panel Patch PanelSThese patch panels cover from top of the fin pinch weld down to the tailpan and over to the tailgate opening. Comes in paint-thru primer1957 Driver ..................................................................#17697 .............. $289.95/ea.1957 Passenger ...........................................................#17698 .............. $289.95/ea.

nomad/waGon tail Panel BraceOften damaged in an accident this piece gets mounted directly to the tail panel giving it structural integrity1955-57 ......................................................................................................................... #17696 .................................. $159.95/ea.

tailPan BraceAttaches to the underside of the splash panel to provide rear body support. Made in the USA.1955-57 Nomad & Wagon ............................................................................................ #12131 ................................. $339.95/ea.

tailPan SUPPortThese tailpan supports will add support and stability to your tailpan brace. These only fit the Nomad and wagon models. Two are required for a complete job. Made in the USA.1955-57 Nomad/Wagon............................ #15599 .....$38.95/ea.

tailPa

n






492

Shee

t Meta

l

Sheet Metal

wh

eel

ho

USi

nG

S

rear wheel well extenSionS1955 Driver Exc. Wagon & Sedan Delivery ...............#2948 .................. $42.95/ea.1955 Passenger Exc. Wagon & Sed. Del. (Shown) ...#2949 .................. $42.95/ea.1955 Driver, exc. Wgn ..................................................#16648 ................ $48.95/ea. 1955 Passenger, exc. Wgn ..........................................#16649 ............... $48.95/ea.1956-57 Driver Exc. Wagon & Sedan Delivery ..........#2950 .................. $44.95/ea.1956-57 Passenger Exc. Wagon & Sedan Delivery ...#2951 .................. $44.95/ea.1956-57 Driver, Nomad, Wagon, & Sed. Del. ..............#10190 ................. $59.95/ea.1956-57 Psngr., Nomad, Wagon, & Sed. Del. (Shown) #10191 ................. $59.95/ea.1956-57 Driver, Exc. Wagon ........................................#16492 ................ $48.95/ea. 1956-57 Psgnr, Exc. Wagon ........................................#16493 ................ $48.95/ea.

inner wheel hoUSinGS1955-57 Driver, 2-Door Sedan

........................ #2270 ......$178.95/ea.1955-57 Passenger 2-Door Sedan

........................ #2271 ......$178.95/ea.1955-57 Rear, Driver, 4-Door Sedan

........................ #10192 ....$198.95/ea.1955-57 Rear, Passenger, 4-Door Sedan

........................ #10193 ....$198.95/ea.1955-57 Rear, Driver, 2-Door Hardtop

........................ #253 ........$198.95/ea.1955-57 Rear, Passenger, 2-Door

Hardtop .......... #254 ........$198.95/ea.

rear wheel hoUSinG SealSWhen replacing the rear quarter panel, the rear wheel housing seal, which seals the quarter panel to the inner fender well, should be replaced also. Made in the USA.1955-57 .............. #851 ......... $22.95/set

rear inner wheel hoUSinGSWe have the answer to your rust problem in the inner quarter panel area of your 1955-57 convertible. These left and right side inner wheel house panels are Made in the USA of heavy gauge sheet metal just as the original pieces were. To com-plete the resto, use with the inner quarter panels part #2637 and #2638.1955-57 Driver, Convertible

........................ #2759 ......$199.95/ea.1955-57 Passenger, Convertible

........................ #2760 ......$199.95/ea.

mini tUB kitThis tub kit is steel construction weld-in designed made specifically to fit the shape of stock inner wheel well. Standard size is flush with frame rails, adding 3" of tire width potential if leaf spring pocket kit or alternative coil over shock rear suspension is utlilized. Requires minor rear seat frame modifications. Made in the USA.1955-57 ........................................................................ #12183 ............. $328.95/ea.

#2949#10191

Factory Style mini tUBSSo you want the wider wheels and tires but you don’t want the normal tubbed look in your trunk? Then these are the answer. These mini tubs appear to be normal wheel wells from Chevrolet but they are a full 2-5/8" wider to accomodate those larger meats. Sold as a pair.1955-57 2-5/8" Wider, Sedan, Hardtop .......................#17018 ................ $369.95/pr.























Sheet Metal

wh

eel ho

USin

GS

oUter wheel hoUSinGS1955 Complete, 3-Pieces Welded, Sedan, Driver ....................................................... #16198 .................................. $109.95/ea.1955 Complete, 3-Pieces Welded, Sedan, Passenger ............................................... #16199 .................................. $109.95/ea.1955 Rocker to Mid Wheel, Driver, 2-Door Sedan ...................................................... #1706 ...................................... $98.95/ea.1955 Rocker to Mid Wheel, Passenger, 2-Door Sedan ............................................. #1707 ...................................... $98.95/ea.1955 Mid to Rear Wheel, Driver, 2-Door Sedan ......................................................... #1708 ...................................... $79.95/ea.1955 Mid to Rear Wheel, Passenger, 2-Door Sedan ................................................. #1709 ...................................... $79.95/ea.1956-57 Rocker to Mid Wheel, Driver, 2-Dr Sedan .................................................... #1710 .................................... $104.95/ea.1956-57 Rocker to Mid Wheel, Passenger, 2-Dr Sedan ............................................. #1711..................................... $104.95/ea.1956-57 Mid to Rear Wheel, Driver, 2-Door Sedan ..................................................... #1712 ...................................... $98.95/ea.1956-57 Mid to Rear Wheel, Passenger, 2-Door Sedan ............................................. #1713 ...................................... $98.95/ea.

rear wheel wellS1955-57 Rear Section, Driver, Hardtop & Convertible (Shown)......................................................................................#2942 .................. $69.95/ea.1955-57 Rear Section, Passenger, Hardtop & Convertible (Shown)......................................................................................#2943 .................. $69.95/ea.1955-57 Front Section, Driver, Hardtop .....................#2944 ...................$81.95/ea.1955-57 Front Section, Passenger, Hardtop .............#2945 .................. $79.95/ea.1955-57 Front Section, Driver, Convertible ...............#2946 .................. $88.95/ea.1955-57 Front Section, Passenger, Convertible .......#2947 .................. $88.95/ea.1956-57 Outer, Driver, Nomad, Wagon & Sedan Delivery .....................................................................................#10188 ................. $89.95/ea.1956-57 Outer, Passenger, Nomad, Wagon & Sedan Delivery......................................................................................#10189 ................. $89.95/ea.

#1706-1707#1712

#1713

inner wheel wellSCan be trimmed to fit Nomad models.1955-57 Driver, 2 & 4-Door Wagon

........................ #15875 ....$279.95/ea. 1955-57 Passenger, 2 & 4-Door Wagon

........................ #15876 ....$279.95/ea.

#16198#16199
























494

Shee

t Meta

l

Sheet Metal

con

ver

tiBle

convertiBletoP motor cover This sheet metal part should be primed and painted black before you install it. 1955-59 .............. #319 ........$104.95/ea.

convertiBle drain channelSDrain channels are located behind the rear seat area, just below the rear pinchweld. Made in the USA.1955-57 Driver ... #10004 ......$98.95/ea.1955-57 Psngr. ... #10005 ......$98.95/ea.1955-57 Center .. #10006 ....$159.95/ea.

convertiBle "x" Frame aSSemBly1955-57 ........................................................................#10440 .............. $859.95/ea.

convertiBle BackreSt SUPPort Replace that worn out area behind the rear seat. Made of heavy gauge sheet metal. 1955-57 ........................................................................#2574 .................$158.95/ea.

convertiBle Front header Bow1955-57 ........................................................................#10003 .............. $698.95/ea.

convertiBle UPPer windShield Frame 1955-57 ........................................................................ .#10246 ............. $799.95/ea.

convertiBle BackreStSUPPort BracketSAttaches the backrest support to the rear inner wheel tubs. Made in the USA.1955-57 Driver ... #10011 ......$34.95/ea.1955-57 Psngr. ... #10012 ......$34.95/ea.

lower convertiBle toPcylinder BraceS1955-57 .............. #10009 ...... $29.95/pr.













Sheet Metal

con

ver

tiBle

convertiBle drainchannel reinForcementSThese drain channels and reinforcements are designed to “channel” away the water around, down and out of your convertible top before it can do damage. Made of high quality sheet metal. Made in the USA.1955-57 Driver ... #2591 ........$24.95/ea.1955-57 Passenger

........................ #2592 ........$24.95/ea.

convertiBle toPmoUnt aSSemBlieSMade in the USA.1955-57 Driver ... #10126 ....$399.95/ea.1955-57 Psngr. ... #10127 ....$399.95/ea.

convertiBle armreSt and PiSton cover aSSemBlieSChevy made their piston cover assemblies out of steel, not fiberglass. The adherence to Chevy’s design makes these piston cover assemblies true reproductions, with a fit and finish that can only be attained in steel. These ready-to-upholster piston cov-ers include ashtray cutouts and are sold in pairs. Please see page 95 for ashtrays. Made in the USA.1955 (Shown)..... #2204 ...... $329.95/pr.1956-57 .............. #2205 ...... $329.95/pr.

convertiBle toP motor SUPPort Panel1955-57 ........................................................................#10008 ................ $89.95/ea.

convertiBle Frame rail Skid PlateSMade in the USA.1955-57 Driver .............................................................#10437 ...............$124.95/ea.1955-57 Passenger .....................................................#10438 ...............$124.95/ea.

convertiBle windShield center Pillar This is the top center windshield pillar/frame that is subject to the elements and sometimes gets damaged by rust. 1955-57 ........................................................................#16483 ...............$139.95/ea.

convertiBle innerQUarter to UPPer SUPPort Panel BracketSWelded to the top inner wheel hub in the trunk just outboard of the trunk hinge. 1955-57 Driver ... #10021 ......$79.95/ea.1955-57 Psngr. ... #10022 ......$79.95/ea.

oUter wheel well to QUarter Panel SUPPortSWelds to the top of the other wheel well and supports the quarter panel.1955-57 Driver, Convertible ........................................#1702 .................. $69.95/ea.1955-57 Passenger, Convertible ................................#1703 .................. $69.95/ea.















496

Shee

t Meta

l

Sheet Metal

new

Gm

lic

enSe

d S

teel

Bo

die

S

woody’S hot rodZ new 1955 and 1957 Gm licenSed Steel BodieS

1957 Body comPlete1957 Hardtop Body ............................... #17665 ..............$19,700.00/ea.1957 Sedan Body .................................. #17666 ..............$19,700.00/ea.1957 Convertible Body ......................... #17667 ..............$19,700.00/ea.

1957 Body Shell1957 Hardtop Body ............................... #17671 ..............$13,900.00/ea.1957 Sedan Body .................................. #17672 ..............$14,900.00/ea.1957 Convertible Body ......................... #17673 ..............$13,900.00/ea.

1955 Body comPlete1955 Hardtop Body ............................... #17662 .............$19,700.00/ea.1955 Sedan Body .................................. #17663 .............$19,700.00/ea.1955 Convertible Body ......................... #17664 .............$19,700.00/ea.

1955 Body Shell1955 Hardtop Body ............................... #17668 .............$13,900.00/ea.1955 Sedan Body .................................. #17669 .............$13,900.00/ea.1955 Convertible Body ......................... #17670 .............$13,900.00/ea.

After years of dreaming, an-ticipating, they are here, new GM licensed steel reproduc-tion bodies, fully assembled and welded, with more high-strength spot welds than the originals. Careful attention is paid to every detail of fit and finish. Built on a stationary jig to eliminate panel shifting for superior body assembly & panel gaps. Features corrosion resistant high strength steel with a white PPG epoxy coating throughout, and is ready for final bodywork and paint.

Complete Bodies include: floor, firewall, dash, trunk floor, tail pan, rear window to trunk panel, trunk walls, wheel housings, outer quarter panels, outer quarter to trunk panels, trunk hinges, inner & outer rockers, roof structure, top skin with drip rail (not convertible), doors, hinges & latches, trunk lid, trunk torsion bars, & a front fenders, inner fenders, hood, splash pad & core support (6 or 8-cylinder). Body Shells include: floor, firewall, dash, trunk floor, tail pan, rear window to trunk panel, trunk walls, wheel housings, outer quarter panels, outer quarter to trunk panels, trunk hinges, inner & outer rockers, roof structure & top skin with drip rail (not convertible).














Sheet Metal

new

Gm

licenSed

Steel Bod

ieS

what iS an mSo (mco)? An MSO or MCO is short for a manufacturer’s statement (or certificate) of origin. We are not a vehicle manufacturer, thus we do not issue an MSO or MCO. We do, however, issue a body number and invoice (by selling dealer) that will take the place of the MSO when registering your vehicle in your state. how do i title and reGiSter a car BUilt USinG a new Body? If you do not have a new or original chassis with a title or MSO, you will need to register the car built with a NEW body as a “Newly Assembled” vehicle with your state. While we do not issue an MSO, you will be issued a Bill Of Sale (your purchase invoice). This invoice will be considered as an MSO by your state DMV (check your local laws and regulations). what iF i have an exiStinG title and vin? We DO NOT suggest using the VIN plate from an original car transferred onto a NEW body. Particularly if you are a shop building the car for a customer. This practice can get you into a lot of trouble. However, if you hold clear title to an original frame to be used under your NEW body, have the state inspect the frame and verify the VIN before assembly. For 1955-57 Chevrolet passenger car frames, the VIN is stamped in two places on top of the driver’s side frame rail. In most cases, your state will issue you a readable VIN plate/tag that matches your frame and title that may be displayed on the body.

- 50% dePoSit on total amoUnt oF order dUe within 7 dayS oF PlacinG order via money order, caShier’S check, wire tranSFer etc. PerSonal check will Be taken, however order For Body will not Be Placed Until check haS cleared. a $500 credit card dePoSit may Be made via Phone at the time the order iS taken to reServe the Body/chaSSiS.

- all BodieS and FrameS have a minimUm 90 day lead time.

- convertiBleS do not come with toP BowS.

- all BodieS and FrameS will Be aSSiGned a SaleS nUmBer BaSed on the date oF the Sale, ShiP-mentS will Be made FirSt in/FirSt oUt.

- dePoSitS are non-reFUndaBle once order For Body or Frame haS Been Placed.

498

Shee

t Meta

l

Sheet Metal

Ga

SSer

Bo

dy

an

d c

ha

SSiS

woody’S hot rodZ 1955 and 1957 GaSSer rollerSIt’s a steel body and chassis. Complete new steel body (less front end), complete Woody’s Gasser Chassis with ladder bars, radiused rear wheel wells, factory seams filled and sprayed in white epoxy coating. Wheels and tires not included in price.1955 ................................................. #17310 ......................................$29,999.00/ea.1957 ................................................. #17661 ......................................$29,999.00/ea.

woody’S hot rodZ GaSSer roller chaSSiS - $8,995• Gasser straight front axle.

• Semi-elliptical springs, spindles, kingpins, steering arms, tie rod kit, hardware kit.

• 5 x 4-3/4" bolt pattern with standard brake or Wilwood brake kit.

• Standard brake kits use new rotors and GM Metric style calipers.

• Shocks not included, but shock mounts are included.

• Ford 9" with 31 spline axles, wheel studs installed 5 on 4-¾ pattern.

• Inboard rear leaf springs.

• Tig welded stock like perimeter frame with all body mounts in place with a

welded in rear shock bar.

• Installs without body mounts or floor pan modification.

• Set up to accept center block motor mounts and transmission cross member.

• Accepts a stock gas tank.

woody’S hot rodZ crUiSer roller chaSSiS - $10,995• Features Heidts tubular steel control arms, 11" disc brakes ,manual rack and pinion.

• Set up to accept side motor mounts and transmission cross member.


• Ford 9" housing mounted with 31 spline axles, wheels studs installed 5 on 4-3/4 pattern.

• Installs without body mount or floor pan modification.

• Set up to accept first generation Camaro long tube or short tube headers for both small

and big block Chevy, will also accept manual transmission z-bar.

• Tig welded stock like perimeter frame with all body mounts in place and tig welded,

includes welded in shock-mount bar.

• Accepts stock gas tank.

woody’S hot rodZ claSSic roller chaSSiS - $11,995• Features Stamped Steel control arms, 1st Gen Camaro Style Front-end

• 11" disc brakes.

• Set up to accept side motor mounts and transmission cross member


• Ford 9" housing mounted with 31 spline axles, wheels studs installed 5 on 4-3/4 pattern.

• Installs without body mount or floor pan modification.

• Set up to accept first generation Camaro long tube or short tube headers for both small

and big block Chevy, will also accept manual transmission z-bar.

• Tig welded stock like perimeter frame with all body mounts in place and tig welded,

includes welded in shock-mount bar.

• Accepts stock gas tank.




Sheet Metal

convertiBle BodieS withoUt FenderSThe 1955 and 57 Chevy’s are 2 of the most recognizable cars on the face of the earth. For millions of hobbyists and restorers they are and always have been a favorite. As time continues to fly by, more and more of the best cars are being completed and taken out of circulation for the restorer that wants to do it himself. As we all know, the most difficult and valuable cars have always been the convertibles, with their low production numbers and their high demand, many avid restorers have not been able to see their true desires realized. These sheet metal bodies are completely correct and Made in the United States of America. They are manufactured using today’s technology such as original gauge galvanized steel panels and resistance welds. Do not mistake these bodies for run of the mill kit cars. Each includes a complete core body mounted to a skid and ready to ship. They DO NOT include the chassis, steering column, steering wheel, convertible top bow assembly, hood hinges etc. Bodies are special order only and require a $10,000 certified funds, non-refundable deposit. The balance of the order is due upon receipt of body.1955 ................................................. #15243 ... $34,000.00/ea.1957 ................................................. #15244 ... $34,500.00/ea.

Whether you have some of the essentials or nothing at all we’ve got you covered. To get an idea check just a few of the compliments we carry to make this dream come true.

Morrison Chassis page 366 – You’re building a brand-new car, why not make it ride and handle like one. Morrison builds the best chassis in the business and has been for years.

Engines pages 394-98 – We carry a fantastic line of engines by Edelbrock and General Motors. With proven performance and reliability, crate engines offer you just the right amount of horsepower and torque in either a small block or big block.

Heating and Cooling pages 297-322 – This section has ev-erything from all the little trick hoses and fittings to high-end cross-flow radiators.

These are just a few of the compliments. We have everything from electrical and wiring, interior section, glass, rims and just about anything else you can think of to build your new project from the ground up.

con

ver

tiBle Bod

ieS



500

Shee

t Meta

l

Sheet Metal

rear BodymoUnt acceSS PlUGSFor those doing frame-off restorations or just checking the condition of the body mount grommets, those original access plugs often won’t survive the operation! Replace them with these quality rubber plugs.1955-57 .............. #812 ............ $8.95/pr.

Floor Pan PlUGFor those replacing their floor pans or just replacing those old rubber parts, this plug is a necessity. Molded in tough rubber to last for years. 4 per car.1955-57 .............. #813 ............$2.50/ea.

trUnkarea inner acceSS PlUGSLocated high on the trunk side walls, these plugs are often found to be cracked or missing upon inspection. 1955-57 .............. #810 ......... $12.95/set

SPare tire well PlUGHeat and time are the enemies for all rubber parts. Inspect your spare tire well, you may find these plugs missing entirely! Two needed per car. Plug can also be used for the end of the rocker panel plug.1955-57 .............. #825 ...........$2.50/ea.

inner Fender SealSOur fender seals are manufactured with rubber formulas that far outlast the original parts. These inner fender seals are an absolute must when replacing or repairing front fenders or inner fender wells. Made in the USA.1949-56 .............. #558 .......... $19.95/pr.1957 .................... #559 .......... $19.95/pr.

rear acceSSoryFender-to-FenderSkirt SealS All accessory fender skirts should be wrapped with these seals before instal-lation to protect the paint finish on the fenders. Sold as a pair. Made in the USA.1955-57 .............. #554 .......... $15.95/pr.

rocker Panel PlUGS All rubber plugs should be inspected and replaced if necessary. Made in the USA.1955-57 .............. #826 .............$7.95/pr.

rear wheel hoUSinG SealSComplete the job. When replacing the rear quarter panel, the rear wheel housing seal, which seals the quarter panel to the inner fender well, should be replaced also. Made in the USA.1955-57 .............. #851 ......... $22.95/set

Front SPlaSh Pan SealSThis seal helps protect your engine com-partment from water and dirt. Engine heat and the passing of time will eventually wear rubber parts, so if you haven’t yet replaced that old seal, do it before your work is compounded. Made in the USA.1957 .................... #288 ........... $11.95/pr.

Ga

Sket

S, S

ealS

, mo

Un

tS

Front endSheet metal Screw SetSContaining over 250 pieces, this is the most complete kit available. Included are body bolts and washers, fender shims, speed nuts, cage nuts, countersunk and self-tapping sheet metal screws, rivets, and SAE washers. Most pieces are cadmium plated or painted, except for the radiator support bolts, which have a black oxide finish.1955 (Shown)..... #791 ......... $64.95/set1956 .................... #792 ......... $64.95/set1957 .................... #793 ......... $64.95/set

StainleSS Front end Sheet metal FaStenerSUses button head bolts, clip nuts supplied are not stainless.1955 .................... #14038 ......$62.95/ea.1956 .................... #14039 ......$65.95/ea.1957 .................... #14040 ......$72.95/ea.


















Sheet Metal

SinGle rectanGUlar Body moUntS1955-57 .............. #15790 ........$4.95/ea.1955-57 .............. #15791 ........ $7.95/ea.1955-57 .............. #15794 ........$9.95/ea.

SinGle SQUare Body moUnt1955-57 ............. #15789 ........$2.95/ea.

Body moUnt Bolt and waSher kitSIt takes more than gravity to hold your car body on those beautiful new mounts! Secure this massive assembly together with hardware you can really trust. Graded five by the Society of American Engineers, these bolts are sturdy, long-lasting and an industry standard.1955-57 Hardtop (Shown)

........................ #496 ........... $17.95/kit1955-57 Sedan, Nomad, Wagon

........................ #497 ........... $17.95/kit1955-57 Convertible

........................ #498 ........... $17.95/kit

Body moUnt SetSStart your frame-off restora-tion with our superior body mount sets. If you can’t do a complete frame-off, just replace them one by one. Top-quality rubber is molded to cad plated steel. We’ve upgraded this set to include a set of body mount shims. Made in the United States of America. 1955-57 Hardtop ..........................................................#532 .................... $99.95/set1955-57 Sedan, Nomad, Wagon .................................#532A .................. $84.95/set1955-57 Convertible ....................................................#532B .................. $56.95/set1955-57 Rear Body Mount Access Plugs ..................#812 ....................... $8.95/pr.

BlackUrethane Body moUntS1955-57 Hardtop #981 ......... $84.95/set1955-57 Conv. .... #982 ......... $84.95/set1955-57 Sedan ... #983 ......... $84.95/set

PoliShedalUminUmBody moUnt retainerS1955-57 w/ Bolt .. #10058 ......$24.95/ea.1955-57 w/ Bolts #10059 ... $232.95/set

Body moUnt ShimS When mounting sheet metal to the body, be sure to use Danchuk body mount shims. These shims help you to properly shim the body to the frame. They are zinc plated for corrosion resistance with tabs at each corner to prevent shifting. Made in the USA.1955-57 .............. #2094 ....... $14.95/set

#15789 #15790 #15791

#15794

#15792

#15793 #15795

SinGle roUnd, larGe Body moUntS1955-57 .............. #15792 ........$2.75/ea.1955-57 .............. #15793 ........$4.50/ea. 1955-57 w/ Shoulder & Washer

........................ #15795 ........$6.95/ea.

NOTE: See photos to view shapes and configurations of mounts.

Ga

SketS, Sea

lS, mo

Un

tS

Body moUntBUShinG coverS1955-57 Hardtop, Convertible

........................ #17208 ... $249.95/set

Small Frame Bracket1955-57 Hardtop/Convertible............................ #17959 ......$49.95/ea.























502

Shee

t Meta

l

Sheet Metal

an

ti-S

QU

eak

Fender anti-SQUeak GaSket kitSThese kits contain an assortment of specialized parts, each one die cut or extruded to exact specifications. Whether you are doing a front clip removal for an engine detail, or a complete frame-off restoration, this is the only way to totally eliminate front end body panel squeaks. Made in the USA.1955 ..............................................................................#294 ......................$17.95/kit1956 ..............................................................................#390 ......................$17.95/kit1957 ..............................................................................#295 ......................$17.95/kit

hood anti-SQUeakGaSket kitSWhen those original hood gaskets de-teriorate, the metal panels contact each other and create a noise that must be silenced! The installation of this kit will eliminate those unwanted squeaks. Made in the USA. 1955-56 ............. #857 ............ $8.95/kit1957 .................... #391 .......... $13.95/kit

#390

#294

#295






sheet metal - danchuk.comcatalog... · 12 section sheet metal in this section: • floor sections...

Documents