shark rotator powered lift-away brush belt replacement · lift up the top cover now that all of the...
TRANSCRIPT
![Page 1: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/1.jpg)
Shark Rotator Powered Lift-Away Brush BeltReplacement
This guide will help you replace the belt that connects the motor to the brush.
Written By: Cameron Ngai
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8
![Page 2: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/2.jpg)
INTRODUCTION
If the brush does not spin and the motor still works, then the brush belt may be worn down ordamaged.
This guide will aid in replacing that belt.
TOOLS:64 Bit Driver Kit (1)
you will need the Phillips, Flathead, and Torxdrivers for the disassembly.
Metal Spudger (1)Phillips #1 Screwdriver (1)T10 Torx Screwdriver (1)
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8
![Page 3: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/3.jpg)
Step 1 — Shark Rotator Powered Lift-Away Head Nozzle Disassembly
Push lift away button and pull the handle up to separate the body from the wand section.
Step 2
Push lift away button on the wandthen lift up on the top section toseparate.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8
![Page 4: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/4.jpg)
Step 3
Tilt the wand shaft backwards for convenient.
Step 4
Lay the head nozzle piece upside down.
Locate and rotate the three gray taps to the unlock position.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8
![Page 5: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/5.jpg)
Step 5
With your fingers, pry and pull thebrush cage open.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8
![Page 6: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/6.jpg)
Step 6
Remove the 13 screws (circled in yellow) using a phillips screwdriver.
Be sure to keep track of which screws go into which hole.
Remove the one screw (circled in red) that has a Torx head.
The Torx screw is hidden under a rubber gasket. Carefully, lift up the gasket without damaging it toaccess this screw.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8
![Page 7: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/7.jpg)
Step 7
Lift up the top cover now that all ofthe screws have been removed.
Step 8 — Brush Belt
Pry tab out with a flat headscrewdriver or any wedge-like tool.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8
![Page 8: Shark Rotator Powered Lift-Away Brush Belt Replacement · Lift up the top cover now that all of the screws have been removed. Step 8 — Brush Belt Pry tab out with a flat head screwdriver](https://reader035.vdocuments.us/reader035/viewer/2022063018/5fdbc41a344c0928a1536448/html5/thumbnails/8.jpg)
To reassemble your device, follow these instructions in reverse order.
Step 9
Gently press in on brush to detach.
Pull brush down and out.
Step 10
Slide the belt off of the gear.
Shark Rotator Powered Lift-Away Brush B… Draft: 2018-01-04Guide ID: 98553 -
This document was generated on 2020-11-28 06:05:13 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8