sharing the future - deutsche messe...

Preferred product catalogue

S H A R I N G T H E F U T U R E

Contents

Introduction

PumpsHigh pressure axial piston pumpsMedium pressure axial piston pumps

MotorsRadial piston motorsAxial piston motors

Mobile ValvesMultiple control valvesPilot valves

Industrial ValvesDirectional valvesCheck valvesPressure valvesFlow valvesSandwich valvesLogic elements

Introduction

With over 80 years’ experience, Kawasaki is a world leader in the design and manufacture ofhydraulic equipment. Renowned for efficiency, quality and controllability, its range of productscontinually provide reliable, fluid power for mobile, industrial, marine and other engineeringapplications. From concept through to application, supply and support, Kawasaki successfullydelivers the complete hydraulic solution.

Preferred Product Catalogue

The Preferred Product Catalogue has been designed to provide the technical specifications ofsome of our most commonly used products. Please contact our sales team with any queries ororders you may have.

How to contact us:Tel: +44 (0) 1752 364 394Fax: +44 (0) 1752 364 816 E-Mail: [email protected] site: http://www.kpm-uk.co.uk

Worldwide Cover

Kawasaki’s hydraulic components and systems are continually expanding on a global scale with aworldwide distribution network, and production sites in Japan (Nishi-Kobe Works) and England(Kawasaki Precision Machinery (UK) Ltd) together with the sales & service bases in Japan, Englandand USA.

Plymouth, England

Grand Rapids, USA

Nishi-Kobe, Japan

Pumps

High pressure mobile axial piston pumpK3VS

FeaturesHigh efficiency

High power density

Large self priming capability

Long life

Low noise

Wide range of control options.

High reliability

High performance

DescriptionK3V pumps are high pressureopen loop axial piston pumpsdesigned specifically for theearth moving and constructionindustries where in excess of700,000 units have beensupplied.

The vast number of controloptions provide the facility fora variety of horsepowercontrols along with negativeand positive flow, load sensing,pressure cut off and electricalcontrol. All of the above areavailable individually or asvirtually any combination toproduce a totallycomprehensive control package.

FeaturesHigh reliability

High performance

Wide range of controls

High self priming capability

Mid section power take offoption (DTP)

Integral centrifugal pump onlarger units (DTH)

Model K3VS 63 112 140 180 280

Capacity (cc/rev) 63 112 140 180 280

Rated pressure (bar) 350 350 350 350 350

Peak pressure (bar) 400 400 400 400 400

Max self prime

speed (r/min) 2600 2350 2150 1950 1600

Maximum boosted

speed (r/min) 3250 2700 2500 2300 2000

Rated torque (Nm) 343 588 1120 1120 1950

Mass (kg) 48 68 86 86 140

Model K3VDT 63DT 112DT 140DT 180DT 280DT

Capacity (cc/rev) 2x63 2x112 2x140 2x180 2x280


Peak pressure (bar) 400 400 400 400 400

Max self prime

speed (r/min) 2600 2350 2150 1950 1600

Maximum boosted

speed (r/min) 3250 2700 2500 2300 2000

Rated torque (Nm) 343 588 1120 1120 1950

Mass (kg) 81 125 160 160 270

Tandem pumpsK3VDT

High pressure industrial axial piston pumpK3VG

DescriptionK3VG pumps are high pressure,open loop, axial piston pumpsdesigned specifically forindustrial applications.

K3VG pumps are offered with awide variety of control optionsand their combinations forpressure, power and pumpdisplacement regulation, in both hydro-mechanical and electrohydraulic forms.

K3VG units are used oncontinuous casting equipment,rolling & hot strip mills, forgingpresses, extrusion machines,hydraulic deck machinery andin many other demanding, highpressure applications.

The inherent use of hydrostaticbearing techniques, togetherwith specially selected bearings,provides for an inherentlystrong and reliable pumpingsystem.

A modular design concept hasenabled the pump series to becontinuously adapted to thechanging and discerning needsof our customers. The conceptalso allows product availabilityand service to be matched tocustomer requirements.

FeaturesReliable, high pressure, long lifemodular design

Low noise and high efficiency

Auxiliary gear pump option

High continuous power rating

High power density

High performance


Full corner power capability


Model K3VG 63 112 180 280

Displacement (cm3/rev) 63 112 180 280

Rated Pressure (bar) 350 350 350 350

Peak Pressure (bar) 400 400 400 400

Rated Power (kW) 70 125 200 255

Rated Speeds at suction pressures ≥ -0.1 (bar rpm) 1800 1800 1800 1500

Maximum operating Speeds suction pressures ≥ +1 (bar rpm) 3250 2700 2300 2000

Mass (kg) 48 68 86 160

Model K3VGDT 180DT 280DT

Displacement (cm3/rev) 360 560

Rated Pressure (bar) 350 350

Peak Pressure (bar) 400 400

Rated Power (kW) 405 510

Rated Speeds at suctionpressures ≥ -0.1 (bar rpm) 1800 1,500

Maximum operating Speeds suction pressures ≥ +1 (bar rpm) 2300 2000

Mass (kg) 160 300

Medium pressure industrial & mobile axial piston pumpK3VL

FeaturesHigh power density

High performance

High reliability


Low noise


Rigid compact structure

Spherical valve plate

Self compensating pistonreturn mechanism

Standard ISO and SAEmounting and porting

Through drive options

Torque limit, pressurecompensator load sensing andpressure control options

DescriptionK3VL pumps are mediumpressure, open loop, axial pistonpumps designed for bothindustrial and mobile use.

Integrated controls provideoptions for torque limit,pressure compensation andload sensing in a very compactinstallation.

Based on the proven K3Vdesign, the K3VL providesexceptional performance andreliability.

Model 45 80 112 140

Capacity (cc/rev) 45 80 112 140

Rated pressure (bar) 320 320 320 320

Peak pressure (bar) 350 350 350 350

Max self prime

speed (r/min) 2700 2400 2200 2200

Max boosted

speed (r/min) 3250 3000 2700 2500

Rated torque (Nm) 225 400 981 981

Mass (kg) 25 34 60 60

Fixed displacement radial piston motorStaffa, series HMB

DescriptionThe Staffa HMB high torque,low speed, fixed displacement,radial piston motor is designedfor rigorous industrialapplications.

Staffa motors provideconsistent, controlledacceleration of loads, ensuringsmooth, steady, low speedoperation.

The only fully hydrostatically balanced design in the industry.

Modular design conceptenables the motor to becontinuously adapted tochanging customer needs. Thisconcept also allows productavailability and service to be matched to market requirements.

Model 100 125 150 200 270

Capacity (cc/rev) 1639 2050 2470 3080 4310

Rated torque (Nm) 6075 7665 9238 11517 15947

Rated speed (r/min) 250 220 220 175 125

Rated power (kW) 110 100 115 130 140


Model 325 400 700

Capacity (cc/rev) 5310 6800 11600

Rated torque (Nm) 19850 25250 36057

Rated speed (r/min) 100 120 100

Rated power (kW) 140 190 240

Rated pressure (bar) 250 250 210

FeaturesHigh performance

High reliability

Good cavitation tolerance

Alternative fluid capability

‘Energised’ piston seal

Large variety of porting options

Double lip shaft seal

Speed and positioning controloptions

High starting and running torque

Wide range of displacementsavailable

Motors

Model 10 30 45 60 80

Capacity (cc/rev) 188 442 740 983 1344

Rated torque (Nm) 577 1357 2737 3625 4975

Rated speed (r/min) 500 450 400 300 300

Rated power (kW) 25 42 60 80 100


Dual displacement radial piston motorstaffa, series HMC

FeaturesDual displacement

Constant horsepower controloption

Hydro-mechanical electro-hydraulic & positionalcontrol options

High starting & running torque

High mechanical efficiency

Consistent, controlledacceleration of loads

Smooth, steady, low speedoperation.

High performance

High reliability

Good cavitation tolerance

Alternative fluid capability

‘Energised’ piston seal

Large variety of porting options

Double lip shaft seal

Speed and positioning controloptions

Wide range of displacementsavailable

DescriptionThe Staffa HMC high torque,low speed, dual displacementmotor is designed for rigorousindustrial applications.

Various control options include:continuously variable &constant power, integral shuttlevalve, directional valve andelectronic positional/speed control systems.

The only fully hydrostatically balanced design in the industry.

Modular design conceptenables the motor to becontinuously adapted tochanging customer needs. Thisconcept also allows productavailability and service to be matched to market requirements.

Model 30 45 80 125

Capacity (cc/rev) high 492 737 1475 2048

Rated torque (Nm) high 1420 2662 5505 7474

Rated speed (r/min) high 450 450 300 190

Rated power (kW) high 60 80 112 104

Rated pressure (bar) high 207 250 250 250

Capacity (cc/rev) low 246 246 410 983

Rated torque (Nm) low 662 800 1327 3200

Rated speed (r/min) low 600 600 600 390

Rated power (kW) low 35 24 42 62

Rated pressure (bar) low 207 250 250 250

Model 200 270 325

Capacity (cc/rev) high 3080 4588 5326

Rated torque (Nm) high 11650 17350 20100

Rated speed (r/min) high 125/175 120 100

Rated power (kW) high 134 140 140

Rated pressure (bar) high 250 250 250

Capacity (cc/rev) low 980 1310 1311

Rated torque (Nm) low 3200 4275 4275

Rated speed (r/min) low 390 350 350

Rated power (kW) low 62 54 54

Rated pressure (bar) low 250 250 250

Fixed displacement axial piston motorM3X

FeaturesCompact

High performance

High reliability

Male and female shaft options

Optional thrust bearingpackage

Built in parking brake

Advanced low speedcharacteristics

Smooth starting characteristics

High speed operation

Wide capacity range

Fixed displacement axial piston motorMX

DescriptionThese multi purpose motors areavailable in a wide range offixed displacements.Mechanical brake units are alsoavailable.

A spherical balanced valve plateprovides excellent cylindersupport, significantly increasingefficiency. Lowered flowvelocity through the cylinderports enables a large self-priming capability.

A swash plate with half logtype tilting mechanism enablessimple construction andreduced maintenance. Extendedworking life is achieved by apiston return mechanism whichself compensates for shoeabrasion.

The later M3X design offers asmaller installation envelopewith higher torque and speedcapabilities.

The MX series motors haveproved extremely reliable innumerous applicationsincluding Industrial vehicles,construction equipment,marine and industrialmachinery.

Model 150 250 500 750

Capacity (cc/rev) 149 252 485 737


Max pressure (bar) 350 350 350 350

Max speed (r/min) 1600 1200 900 830

Rated torque (Nm) 579 981 1893 2873

Model 125 200 280 400 530 800 1000

Capacity (cc/rev) 125 195 270 384 533 800 1027

Rated pressure (bar) 300 300 300 300 300 300 300

Max pressure (bar) 350 350 350 350 350 350 350

Max speed (r/min) 2200 1900 1700 1500 1400 1200 1100

Rated torque (Nm) 588 910 1280 1800 2490 3750 4810

FeaturesCompact

High performance

High reliability

Male and female shaft options

Optional thrust bearing package

Built in parking brake option

DescriptionThese multi-purpose motorsare available in a range of dualdisplacements.

The MB series have a range ofdisplacement control options toinclude:

a) Directional Control ValveShifts displacement small orlarge by remote control signal.

b) Sequence ControlRegulatorAutomatically shiftsdisplacement small or largedepending on the load.

c) Constant HorsepowerControl RegulatorMaintains constant horsepowerregardless of the load.

d) Speed & CHP ControlRegulatorControls displacement anyposition by pilot pressure. Thepilot pressure can be controlledby a solenoid-operateddirectional control valve or apressure-reducing valve.

The later M3B design offers asmaller installation envelopewith higher torque and speedcapabilities.

The MB series motors haveproved extremely reliable innumerous applicationsincluding Industrial vehicles,construction equipment,marine and industrialmachinery.

Dual displacement axial piston motorMB

FeaturesDual displacement

High performance

High reliability

Optional bolt on relief valves

Optional bolt on anti cavitationvalves

Compact

Model 500 750

Capacity (cc/rev) 485 242 737 369

Rated pressure (bar) 250 250

Max pressure (bar) 350 350

Max speed (r/min) 960 1200 830 1050

Rated torque (Nm) 1920 955 2900 1465

Dual displacement axial piston motorM3B

FeaturesAdvanced low-speed characteristics

Smooth starting characteristics.

The range of displacement is100% - 33%

High speed operation

Electric displacement control

Dual displacement (2:1 or 3:1)

High performance

High reliability

Optional bolt on relief valves

Compact

Model 530 800

Capacity (cc/rev) 533 267 178 800 400 267

Rated pressure (bar) 300 300


Max speed (r/min) 1400 1700 1700 1200 1500 1500

Rated torque (Nm) 2490 1245 830 3750 1825 1250

Fixed displacement axial piston motorM2X/M5X

DescriptionThe M2X/M5X fixeddisplacement axial pistonmotor is specifically designedfor excavator swing operation.

This design provides for anextraordinarily compact motorwhereby the motors rotatinggroup, integral mechanicalbrake element and theattached valve options areneatly packaged together.Assembling the mechanicalbrake around the rotatinggroup means that there is noconfiguration difference inmotor installation which allowsfor the simple provision of thebrake option.

Fixed displacement axial piston motor K3X

DescriptionThe K3X fixed displacementaxial piston motor is a small,compact motor designed forhigh speed applications.

The K3X is based on the provenK3V design and provides asmall, robust, high speedsolution.

Model 63 80 90 112

Capacity (cc/rev) 64 82 89 111


Max pressure (bar) 350 350 350 350

Max speed (r/min) 2400 2200 2200 2200

Rated torque (Nm) 250 / 320* 320 / 410* 348 / 446* 432 / 554*

*Heavy duty variant

FeaturesConstructed specifically forexcavator swing operation

Integrated valving

Direct connection to reductiongear

High performance & reliability

Built in shockless relief valves

Built in anti cavitation valves

Built in parking brake

Optional time delay valve

Optional anti reaction valve

FeaturesSpherical valve plate

Simple construction

High efficiency

Low noise

High reliability

High performance

High speed capability

Heavy duty versions available

Model M2X 22 45 63 210

Model M5X 130 180

Capacity (cc/rev) 22 45 64 129 180 210

Rated pressure (bar) 210 210 300 330 330 300

Max pressure (bar) 250 250 330 400 400 330

Max speed (r/min) 2500 2000 2200 1850 1680 1400

Rated torque (Nm) 72 148 300 670 930 980

Mobile valves

Control valveKMX

DescriptionKMX series multiple controlvalves are high pressure semi-monobloc type valves,specifically designed to controlexcavator actuators.

Main and pilot circuits areincorporated in the semi-monobloc housing providingcustomer specific functions.

Straight line travel, swingpriority, and delicate inchingoperations are all achievablewithin this highly flexible,compact energy efficient valveblock.

Control valveMW

DescriptionThe MW series high pressure,multiple valves are of asectional type.

They include integral reliefvalves, load check and servicerelief valves. They are reputedas high quality control valvesfor mobile equipment and areoften used in craneapplications.

These multiple valves havethree kinds of sections ofparallel, series and tandemcircuits. Accordingly, they areapplicable to many hydrauliccircuits. When necessary, aflow control of one valvesection independent of othersections is possible by insertinga pressure compensation valve.

Model 13 15 32

Rated flow (L/min) 130 240 360

Max pressure (bar) 350 350 350

Mass (kgf) 95 130 300

Model 25 28

Rated flow (L/min) 240 350


Mass (kgf) 75 4 sections126 4 sections

FeaturesConventional open centrebypass

Diversified multiple functions

Excellent controllability: adelicate inching operation ispossible

Compactness

High pressure boost andconfluence functions

Operational mode: manual andhydraulic pilot operations.

Increased efficiency: acombination of a remotecontrol valve and a variabledisplacement pump attains anenergy saving circuit.

FeaturesNegative control system

Diversified multiple functions

Excellent controllability

Compact

Swing priority function

Straight travel function

High pressure boost andconfluence functions

FeaturesHigh responsiveness

Low hysteresis

Optimum dampingcharacteristics

Compact alloy body

Variety of controlcharacteristics

Ability to tailor handle loadingrequirements

Wide range of handle options

Proven reliability

Control valvePV48

BenefitsThe PV48 series are pressurereducing type pilot valves. Aunique differential area spooldesign provides optimumoperator feel, control andrepeatability.

Various operating curves,detents and handle loadings areavailable to meet specificapplication needs.

Low operating forces andintegral damping enableextremely fine, precise control.

Model 48K 48M

Rated flow (L/min) 20 15

Max inlet pressure (bar) 70 70

Control pressure range (bar) 5 - 44 5 - 44

Lever angle (degrees) +/- 19 +/- 19

Control valvePV6P

DescriptionThe PV6P is a pressure reducingpilot valve. The ‘banked’ designenables the option of selectingup to 6 ‘two spool’ controls.

Control valveRCV

FeaturesUnique integral dampingmechanism (option)

Multiple options

Unique damping mechanism

Resilient dust proof boot

Large return and control flowgalleries

Integral check valve (option)

Variety of controlcharacteristics

Robust monobloc construction

Foot pedal or lever type

FeaturesThe operational torque can betailored to the customer’srequirement.

Optional detents available.

The banked design enables amaximum of six directionalcontrol valves to be assembledin one unit.

Reduced pressure drop withquick response.

Stable performance over a widerange of operating temperature.

DescriptionThe RCV series are monoblocreducing pilot valves specificallydesigned for foot operation.

Four, two and single spoolvariants are available. Anintegral damping mechanismand internal check valves arealso available.

The robust monoblocconstruction provides a reliablefoot operated valve with superbdamping and controlcharacteristics.

Specifications

Max Inlet pressure (bar) 100

Output pressure (bar) 0~30

Max Back pressure (bar) 3

Rated flow (L/min) 10

Operating torque (max angle) N•m 1~4.1

Specifications

Rated flow (L/rev) 10

Max Inlet pressure (bar) 100

Control pressure range (bar) 5-44

Lever angle (degrees) +/-12.5

Directional spool valveDE6

DescriptionType DE6 series 20 DirectionalSpool Valves are solenoidoperated directional spoolvalves that are used to control(start, stop and direction) fluidflow.

Directional control valveDE10

DescriptionType DE10 series 20 DirectionalSpool Valves are solenoidoperated directional spoolvalves that are used to control(start, stop and direction) fluidflow.

Description Nominal size Qmax (L/min) Pmax (bar)

Electrically operated, DC & AC voltages, 6 60 315wet pin, subplate mounting



FeaturesHigh durability

Oil immersed wet pin AC & DCsolenoid with removable coil

Manual override as standard

Various voltage solenoidavailable

Large variety of spoolconfigurations available

P port throttle option available

Various fluid capabilities

FeaturesHigh durability

Oil immersed wet pin AC & DCsolenoid with removable coil


Various voltage solenoidavailable

Large variety of spoolconfigurations available.

P port throttle option available


Industrial valves

Directional spool - pilot operated valveDEH16

FeaturesOptimised casing and spoolprofile to increase flowcapability.

Spring centred and offsetversions

Wet pin AC and DC solenoidsavailable


Numerous spool configurations

Stroke adjuster option


DescriptionType DEH16 valves are 3/ 4way directional spool valveswith a spring centring controlspool. These valves areelectro-hydraulic directionalspool valves that are used tocontrol (start, stop, anddirection) fluid flow.



Check valveC

DescriptionType C series 10 check valves aredirect acting valves that allowfree flow in one direction andblock any reverse direction flow.

Check valveCH

DescriptionType CH series 10 Check valvesare pilot operated valves thatmay be hydraulic operated topermit reverse flow. Valves maybe supplied with or withoutdrain ports.

These valves are used to isolatea hydraulic circuit underpressure.


Threaded connections only 6 15 315


Subplate & threaded connections 10 50 315





Subplate mounting only 52 700 315




















FeaturesIn-line threaded connection orangled sub plate versions

High durability

6 cracking pressure options

Leak free enclosure in onedirection


FeaturesSub-plate mounting andthreaded connections

Shock-free directional control

Internal or external drain port


FeaturesHigh Response

Cartridge type available

Easily built into manifold

Compact

Seat type minimises internalleakage compared to balancedtype relief valve


DescriptionType RD Series 10 Pressurerelief valves are direct operated,seat type, relief valves, used toprevent sudden pressureincreases and to support theload within a hydraulic system.

The valves primarily comprise abody, spring, poppet withdamping spool (pressure stages25 to 400 bar), (or ball pressurestage 630 bar – size 10 only)and an adjustment elementthat facilitates setting systempressures.

DescriptionType RB and RBE series 10Pressure relief valves arebalance piston, seat type, reliefvalves that are used:

To control the maximumpressure within a hydrauliccircuit, preventing overload.

To control by loading/unloadinghydraulic circuit pressure.

Pilot relief valveRB/RBE


Subplate mounted 10 200 315




Cartridge valve & threaded connections 6 50 400


Subplate mounting, cartridge valve & threaded connections 10 120 630





FeaturesAccurate movement

Quick response

High stability

Relatively small pressureoverride

Smooth unload function

3 adjustment methods

2 pressure ratings

Low internal pressure


Suitable for installation inmanifolds

Solenoid operating unloadingvia a built on directional spoolvalve.

RBE pictured

Direct acting pressure relief valveRD

Direct acting pressure reducing valvePRD

DescriptionType PRD6P Pressure ReducingValve is a direct operated valveof the 3 way design ie withpressure relief function on thereduced pressure side. The valveis used to reduce the pressureon a section of a circuit.

Pilot reducing valvePRB

DescriptionType PRB series 10 pressurereducing valves are balancedpiston, pilot operatedreducing valves that areused to reduce pressure in ahydraulic circuit. Type PRBseries 10 pressure reducingvalves will maintain thespecified secondary sidepressure even when theprimary side pressuresfluctuate.

FeaturesHigh response

Cartridge type available

Easily built into manifold

Compact

Seat type minimises internalleakage compared to balancedtype relief valve


4 pressure ranges


With or without free-flowcheck

Stable pressure control

Suitable for manifold mounting

FeaturesCompact construction

Large flow capability

2 pressure range settings



Stable pressure control

Suitable for manifold mounting








Brake valveB

DescriptionType B series 10 brake valvesprimarily comprise housing,direct acting relief valve, checkvalve and throttle valve.

Counterbalance valveCBD

DescriptionType CBD Counterbalancevalves primarily comprisehousing, direct acting reliefvalve and check valve.


Subplate mounted only 6 45 315












FeaturesCompact construction

Quick response

Chatter resistant mechanism

Seat type relief minimises internal leakage


FeaturesQuick response

Minimal internal leakage

Chatter resistant mechanism

Stable operation

4 circuit configurations

Counterbalance valveKDZ

DescriptionType KDZ counterbalance valvesprimarily comprise housing,spool, piston, springs, adjustingscrew and check valve.






FeaturesMinimal internal leakage

Stable breaking action

3 braking pressure ratings

2 braking flow ratings

Unloading function

Throttle & throttle check valveT/TC

DescriptionType T series 10 throttle valvesand type TC throttle checkvalves are pressure andviscosity dependent throttlecheck valves. The valves throttlethe flow in one direction andallows free flow in the reversedirection.


Pipe fitting connection 6 15 315







FeaturesSuitable for direct in-linemounting

Pressure & viscosity dependant

Threaded connection for easyinstallation

Scale provided for accurate andrepeatable settings

High precision control notchincorporated for precisesettings


FeaturesThin "blade" type orificeprovides superior temperatureand viscosity compensation

Integral check option

Numerous flow ranges available


Stroke limiter can be mountedto stop jumping at start up(optional)

Large selection of maximumflow rates to enable optimumcontrol.

Rotary knob with scale

Rotary adjusting knob has alock to stop accidentaladjustment

Two way compensated valveFJC

DescriptionType FJC series 10 Flow ControlValves are used to maintain aconstant flow independent ofpressure and temperature.These valves do not have theoptions of external closing andcheck valves.


Subplate mounting 5 15 210



FeaturesDirect operated check design

7 different isolating functionsavailable

leak-free closure ports

Used in vertical stackingassemblies


DescriptionType S-C6 and S-C10 series 10check valves are directlycontrolled valves of sandwichplate design. The valves provideleak free closure in onedirection and free flow in theopposite direction.

Sandwich check valveSC


Sandwich type 6 40 315


Sandwich pilot check valveS-CH

DescriptionSandwich Type S-CH 10 series10 Check Valves are pilotcontrolled valves of sandwichplate design. The valves provideleakage free closure in onedirection for one or twoactuator ports and free flow inthe other direction. Thesevalves can be used forprolonged standstill periods.




FeaturesPilot operated check design


Leak-free closure of one or twoactuator ports


Pressure reducing valveS-PRD

DescriptionType S- PRD series 10 pressurereducing valves are directacting valves of sandwich platedesign, that provide pressurereduction with a pressure relieffunction on the secondary side.







FeaturesDirect acting pressure reducerdesign


4 pressure ranges

Optional check valve



Sandwich relief valveS(2)RB

DescriptionType Sandwich S-2RB series 10Pressure Relief Valves are pilotcontrolled valves of sandwichplate design. The valves providepressure limitation within ahydraulic system.

FeaturesPilot operated relief design


2 pressure ranges

5 or more circuit configurations

Single or dual relief cartridgescan be incorporated


FeaturesDual Throttle design


Meter-in and meter-outcircuitry available

Used to control and limit theactuators main and pilot flows


Double throttle check valveS-2TC




DescriptionType Sandwich S-2TC series 10valves are double throttle/check valves of sandwich platedesign. The valves providepressure limitation to the mainor pilot flow of one or twoactuators. The valves limit theflow in one direction and allowfree flow in the other.

Logic Elements

FeaturesInstallation to DIN 244342

Porting patterns to DIN244342

Poppet with and withoutdamping

Two area ratios

5 different springs available

Control capsLU

A range of mountablecontrol caps are available forthe logic elements.

Logic elementsKLD


Cartridge Type 16 180 420








DescriptionLogic KLD type valves provide areliable and cost effectivemethod of controlling highpressures and flows.

The complimentary LU range ofcontrol covers provide variouscontrol options which can beintegrated into the cover orprovide the ability to mountadditional secondary valves.

S H A R I N G T H E F U T U R E

The right to modification for technical

improvement is reserved.

Printed in England

ISO 9001

Certification

No. 891150

Kawasaki Precision Machinery (UK) Ltd,Ernesettle, Plymouth, Devon PL5 2SA, UK.

Tel: +44 1752 364 394 • Fax: +44 1752 364 816E-mail: [email protected]

www.kpm-uk.co.uk

Kawasaki Motors Corp., U.S.APrecision Machinery Division

5080, 36th St. S.E.Grand Rapids, MI 49512, U.S.A.

Tel: +1 616 975-3105Fax: +1 616 975-3103

www.kawasakipmd.com

KHI TokyoPrecision Machinery DivisionWorld Trade Centre Building4-1 Hamamatsu -cho 2-chomeMinato-Ku, Tokyo, JapanTel: +81 3 3435 6862Fax: +81 3 3435 2023www.khi.co.jp

Des

igne

d &

pro

duce

d by

Cle

ar C

omm

unic

atio

ns

+44

175

2 66

4262

sharing the future - deutsche messe...

Documents