1

R1 User Manual

Login Steps.....................................................................................................3

Functions........................................................................................................4

Network Settings............................................................................................5

Displaying Setting..........................................................................................7

Other Settings................................................................................................8

Upgrade.........................................................................................................9

The manual is applied only to R1 client

2

Models in one series may set up different.

www.sharevdi.com

Attention

Please set up the remote desktop system in the host server first, R1 is only

offered as the remote desktop client.

Statements： The pictures included in manual is for reference only;

No unauthorized quote the manual content;

The function mentioned in the manual may be different for various

models or firmware;

The manual is used as a guide only,all description and proposal makes

no express or implied warranties.

3

Working environment： Temperature：0~45℃

Humidness：10%~90%

Atmospheric Pressure：86Kpa~106Kpa

Power Specification：Input：100~240V，50~60Hz;Output：5V,3A,ripple is less than 50mV

【NOTICE】： Use only the power supply provided with the product.

Do not use the product in high or low temperature

environment,keep the working environment ventilation and heat

dispersion,moistureproof waterproof.

Do not pull out the adapter in the state of power-on.

Do not supply electricity by USB port.

4

Basic Operation

Connection: As is shown,to connect thin client and host PC by switch(by LAN or WLAN)

Power on：Connect with the power supply and press the power button.

Power off or restart: By the power button of thin client.

Display: VGA or HDMI option,please choose one according to the corresponding monitor.

Terminal Management: All setup mentioned in the manual can be done by terminal

management software in the server.

5

Login Steps

Two steps for zero client to login server:

Step1: Search server automatically(the server can be searched by system

automatically). Or enter server IP address by user.

Step2: Login server

Method 1: Select IP address, enter user name and password, click login.

Method 2: Login server through R1 management software.(create desktop by one

key press and login. )

Note: Here introduce necessary operation steps for login server. Other functions are

introduced one by one starting from next page.

6

Functions

Click setting button on the bottom right corner, come into control panel(no

initial password)

4 parts are shown on control panel:

Network Setting

Display Setting

Other Setting

7

Upgrade

Note:The box ahead of save password, auto login and switch linux OS can

be ticked.

Network Settings

Click “Network Setting”to start: Cable network setting is with two modes: dynamic IP”&“Static IP”

Network parameter can not be changed in dynamic IP. All parameter was obtained from HDCP server.

In Static IP status, make IP address, subnet mask, default gateway and etc the same as current IP network.

The purpose of network test is to check whether it’s connected between zero clients and server.

8

Wireless network setting:

Click “Search”, near WIFI hotspot will be searched out. Click and enter password

to connect WIFI.

Password format: NONE, WEP and WPA-JGKA-DAF

Click “Connect”, connecting progress bar will show. WIFI will disconnect when

click “Disconnect”.

9

Displaying Setting

“Displaying Setting”includes followings:

“Displaying Setting”includes modes, vertrefresh and depth. Multiple modes can be used.

Default vertrefresh is 60HZ. Depth is the same as remote desktop’s. Support 16pp and 32bpp.

10

Other Settings

Click “Other Setting”for following setting:

Language Setting: Setting language for interface and keyboard.

Functions:Device redirection,connecting automatically when disconnected,

customize logo, appear local server name, delay automatic connecting.

Safety Setting: Setting or modify password.

11

Upgrade

Click “Upgrade”for following setting:

“System info”show zero client specification and version info.

“Upgrade”includes local update and restore defaults.

Local Update:Copy“R1 update.ta”to USB disk(pls don’t use U disk

which has been use for boot disk), Click local upgrade and it will upgrade

automatically.

Restore Defaults:Restore system to default settings.

12

Note: Pls keep power on and wait patiently during upgrade. And don’t

move zero client or plug USB disk out.