shaping tools and power tool accessories1 · 1876 - circular saw blades introduced, using a...
TRANSCRIPT
1
Shaping Tools andPower Tool Accessories
2 3
THE SIMONDS STORY
The year was 1832, only 56 years since America’s independence. It was in that year
that Abel Simonds set up a small workshop in Fitchburg, Massachusetts to provide
scythe blades for sawmills, cotton mills, and some of the very first paper mills.
More than 180 years have passed since those early beginnings and Simonds is now
the oldest cutting tool manufacturer in North America. Today, Simonds offers one
of the broadest and most trusted lines of cutting tools and power tool accessories
found anywhere in the world. Craftsmen and tradesmen from many industries have
grown to depend on the quality and innovation of Simonds products and services.
For all those years, skilled masters in many wood and metal fabricating industries
have turned to Simonds for products and services to improve their position in the
marketplace. Simonds provided The Professionals’ Edge then, and carries on that
tradition today.
Simonds has a rich history, having experienced many important milestones over its
lengthy history:
1832 - Simonds founded by Abel Simonds, producing skythe blades and knives.
1876 - Circular saw blades introduced, using a patented tempering system.
1878 - Wide bandsaw blades introduced, becoming the core product range.
1879 - Cross-cut hand saw introduced with patented grinding process.
1905 - Fitchburg File Works purchased, producing files & hacksaws since 1864.
1910 - Electric-powered steel mill built to fill Simonds growing demand.
1927 - The Abrasive Co. purchased, with a reputation as an innovator in abrasives.
1955- Heller Brothers purchased, the oldest manufacturer of files, since 1836.
1962 - The Atrax Co. purchased, the largest manufacturer of carbide drills & burrs.
1968 - Simonds introduced world’s first bimetal band saw blades.
1991 - Ralston File purchased, the U.K.’s largest file manufacturer, since 1913.
1999 - The hole saw division of Anderson Products is purchased, adding PTA.
2001 - The Nicholson bandsaw division of Cooper Tools is purchased.
2007 - Simonds celebrates its 175th year anniversary.
TABLE OF CONTENTS
3 MACHINIST FILES
Flat, Hand, Mill, Half Round, Round, Square, and Three Square files
18CIRCULAR SAW BLADES
Carbide tipped circular saw blades and steel brush cutter blades
22DIAMOND WHEELS
Turbo diamond wheel blades
23ABRASIVE WHEELS
Cut-off wheels, Grinding wheels, flap discs
25HACKSAW BLADES
HSS and bimetal hacksaw blades
26RECIP BLADES
Bimetal reciprocating saw blades
27HOLE SAWS
Annular cutters, Bimetal hole saws, diamond grit hole saws
30DRILL BITS
Carbide-tipped and high speed steel drill bits
14ROTARY BURS
Solid tungsten carbide rotary burs
10 SAW FILES
Triangular taper, feather edge, and chainsaw files
4 5
MACHINIST FILES
File Terminology
• Work to be accomplished, roughing or finishing will determine type of teeth and coarseness for each application• Most American pattern files are available with 3 grades of cut: bastard-cut, second-cut and smooth-cut• The degree of coarseness is greater in longer files, but differences between bastard, second and smooth are proportionate
Bastard cut Second cut Smooth cut
• Length is measured exclusive of tang, from point to heel, unless otherwise specified• Desired stroke length, type of material and size will determine length required
Coarseness Length
Shape
• Area to be filed will determine specific cross-section (round, square, flat, etc.) to be used
Tang Heel Belly Point
Length
Kinds of Teeth
Single-cut
Double-cut Multi-Kut®
Nucut® Wavy Tooth
Vixen® Curved Tooth
• Single set of parallel, diagonal rows of teeth• Single-cut files are often used with light pressure to produce a smooth surface finish or to put a keen edge on knives, shears or saws
• 2 sets of diagonal rows of teeth• Second set of teeth cut in opposite diagonal direction and on top of the first set• First set of teeth is known as the overcut, second is known as upcut• Upcut is finer than overcut• Double-cut file is used with heavier pressure than the single-cut and removes material faster from the workpiece
• Teeth arranged in curved contours across the file face• Curved-cut files are normally used in automotive body shops for smoothing body panels
• Removes material faster while creating a smooth finish • The combination of coarse teeth and a “chip breaker” groove cut into the file allows this product to do the work of a flat file and a mill file
• Coarse to fine to extra fine tooth spacing enables material to be removed faster and smoother without “chatter”• File lasts longer due to reduced stress on the file teeth
Boxed Packaging
Mac
hini
st F
iles
• Used by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal• Rectangular in cross section and taper slightly towards point in width
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73227000 179109 73227500 179116 73228000 179123 12 1,200
6” 150mm 73229500 135846 73230000 179130 73230500 179147 12 360
8” 200mm 73232000* 135853 73232500 179154 73233000 179161 12 144
10” 250mm 73234000* 179178 73234500 179185 73235000 135860 6 90
12” 300mm 73236000* 135877 73236500 179192 73237000 179208 6 48
14” 350mm 73238000* 135884 73238500 179215 73239000 179222 6 36
Half Round Files - Boxed
Flat Files - Boxed
• Double-cut on sides, single-cut on edges• Available in bastard, second and smooth-cut • Boxed
• Used on concave, convex and flat surfaces• Rounded on 1 side, flat on opposite• Backs of all half-round bastard files are double-cut• Backs of all half-round second cut files longer than 6” are double-cut
• Backs of all 4” and 6” files are single-cut• Backs of all half-round smooth files are single-cut • Flat sides of all half-round files are double-cut• Pipeliner file is single-cut on back and flat sides• Boxed
MACHINIST FILES
* Nucut® Wavy Tooth pattern featured on 8” to 14” flat bastard-cut files
Machinist Files
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73315000 135921 73315500 179239 73316000 135938 12 840
6” 150mm 73317000 135945 73317500 179246 73318000 179253 12 480
8” 200mm 73319000 179260 73319500 179277 73320000 135952 12 192
10” 250mm 73321000 179284 73321500 179291 73322000 179307 6 90
12” 300mm 73323000 135969 73323500 179314 73324000 179321 6 48
14” 350mm 73325000 135976 73325500 179338 73326000 179345 6 36
14” 350mm 73327000 135983 Pipeliner - - 6 36
6 7
MACHINIST FILES
• Rectangular shape• Double-cut
Hand Files - Boxed
• 1 safe edge• Same coarseness as flat files with corresponding lengths • Boxed
• Used for sharpening mill or circular saws• Also for draw-filing and finishing metals• Rectangular shape• Single-cut on sides and edges
Mill Files - Boxed
• 2 square edges• All sizes taper slightly in width • Boxed
Mac
hini
st F
iles
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73615000 179444 73615500 179451 73616000 179468 12 840
6” 150mm 73617000 179475 73617500 179482 73618000 179499 12 360
8” 200mm 73619000 179505 73619500 179512 73620000 179529 12 144
10” 250mm 73621000 179536 73621500 179543 73622000 179550 6 90
12” 300mm 73623000 179567 73623500 179574 73624000 179581 6 48
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73140500 001509 73141000 001516 73141500 001523 12 1,080
6” 150mm 73143000 001530 73143500 001547 73144000 001554 12 480
8” 200mm 73145500 001561 73146000 001578 73146500 001585 12 192
10” 250mm 73147500 001592 73148000 001608 73148500 001615 12 96
12” 300mm 73149500 001622 73150000 001639 73150500 001646 6 72
14” 350mm 73151500 001653 - - 73152500 001660 6 48
• Primarily used to file circular openings or concave surfaces• Round shape• All 4, 5, 6, 10, 12” files are single-cut• 14” bastard file is double-cut
Square Files - Boxed
Round Files - Boxed
• Tapered slightly towards point• Safe point on round files• Boxed
• Used on slots, keyways and general surface filing• Square shape• Double-cut
• Tapered slightly towards point• Larger sizes frequently preferred to corresponding flat files because of heavier section and 4 filing surfaces• Boxed
MACHINIST FILESM
achinist Files
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73393000 179338 73393500 179345 73394000 179352 12 1,200
6” 150mm 73396000 135983 73396500 179369 73397000 135990 12 432
8” 200mm 73398500 179376 73399000 179383 73399500 179390 12 336
10” 250mm 73400500 136003 73401000 179406 73401500 179413 12 120
12” 300mm 73402500 136010 73403000 179420 73403500 179437 6 48
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73425000 001066 73425500 001073 73426000 001080 12 1,200
6” 150mm 73428000 001097 73428500 001103 73428500 001110 12 480
8” 200mm 73430000 001127 73430500 001134 73431000 001141 12 300
10” 250mm 73432000 001158 73432500 001165 73433000 001172 12 96
12” 300mm 73434000 001189 73434500 001196 73435000 001202 6 48
8 9
MACHINIST FILES
• For general use by machinists for filing internal angles more acute than right angles, cleaning out square corners and filing taps and gutters• Triangular shape
Three Square Files - Boxed
• Double-cut• Sharp corners are slightly set and cut • Cut to the point
Knife Files - Boxed
• Double-cut on sides, single-cut on sharp edges• Knife files are supplied with safe backs • Boxed
• Used primarily by tool and die makers with work having acute angles • Triangular shape
Mac
hini
st F
iles
Warding Files - Boxed
• Double-cut on sides, single-cut on edges• Also suited for use in narrow spaces where other files will not fit• Boxed
• Used primarily by locksmiths in repairing and filing ward notches in keys • Triangular shape
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
6” 150mm 73516500 179628 73517000 179635 73517500 179642 12 336
8” 200mm 73518000 179659 73518500 179666 73519000 179673 12 144
10” 250mm 73519500 179680 73520000 179697 73520500 179703 12 60
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73498500 000595 73499000 000601 73499500 000618 12 1,200
6” 150mm 73500000 000625 73500500 000632 73501000 000649 12 480
8” 200mm 73501500 000656 73502000 000663 73502500 000670 12 192
10” 250mm 73502500 000687 73503000 000694 73503500 000700 12 96
Bastard Cut Second Cut Smooth CutCat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton
Inch mm No. 726606 No. 726606 No. 726606 Pack Pack
4” 100mm 73479000 179734 73479500 179741 73480000 179758 12 1,200
6” 150mm 73481000 179765 73481500 179772 73482000 179789 12 480
8” 200mm 73482500 179796 73483000 179802 73483500 179819 12 360
10” 250mm 73484000 179826 73484500 179833 - - 12 180
• Simonds exclusive Multi-Kut® design features a diamond pattern “double chip-breaker” allowing for fast stock removal while leaving a smooth finish. • Obtain almost any required finish simply by changing the feed pressure
Multi-Kut® Flat Files - Boxed
• Single-cut on sides & edges• Combines the performance of flat and mill files• Boxed
MACHINIST FILES
Multi-Kut® Half Round Files - Boxed
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
6” 150mm Boxed 73327500 72660600075 12 480
8” 200mm Boxed 73328000 72660600076 12 192
10” 250mm Boxed 73328500 72660600077 6 90
• Used on concave, convex and flat surfaces• Rounded on 1 side, flat on opposite• Both sides are double cut with second cut coarseness
Machinist Files
• Simonds exclusive Multi-Kut® design features a diamond pattern “double chip-breaker” allowing for fast stock removal while leaving a smooth finish. • Obtain almost any required finish simply by changing the feed pressure
Multi-Kut® Hand Files - Boxed
• Double-cut, 1 safe edge• Combines the performance of flat and mill files• Boxed
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
6” 150mm Boxed 73617100 726606179734 12 360
8” 200mm Boxed 73619100 726606179741 12 144
10” 250mm Boxed 73621100 726606179758 6 90
12” 300mm Boxed 73623100 726606179765 6 48
• Simonds exclusive Multi-Kut® design features a diamond pattern “double chip-breaker” allowing for fast stock removal while leaving a smooth finish. • Obtain almost any required finish simply by changing the feed pressure
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
8” 200mm Boxed 73243000 726606000717 12 144
10” 250mm Boxed 73243500 726606000724 6 90
12” 300mm Boxed 73244000 726606000731 6 48
14” 350mm Boxed 73244500 726606000748 6 36
10 11
TAPER SAW FILES
Taper (Triangular) Saw FilesNumber of Saw Points Files Recommended
4 7” Heavy or 8” Regular Taper
5 7” Regular Taper or 10” Slim
5½ 7” Regular Taper or 10” Slim
6 5” or 6” Regular Taper
7” or 8” Slim
7 6” or 7” Slim
8 4” Regular Taper
6” Slim, 7” X Slim, 8” XX Slim
9 5” Slim, 6” X Slim, 7” XX Slim
10 3½” Regular Taper or
5” Slim, 5” X Slim, 6” XX Slim
11 3” Regular Taper or
4” Slim, 5” X Slim, 6” XX Slim
12 3” Regular Taper or 5” X Slim
13,14 4” X Slim or 5” XX Slim
15,16 4” XX Slim
• Made for filing saws with 60° angle teeth• Triangular shape• Single-cut• Edges set and cut for filing gullets between saw teeth• In filing handsaws, it is important to select the right file• In general, the table lists suggested size and type of file that will give best results
Taper Files - Regular - Boxed
• Tapers slightly towards the point• Triangular shape• Boxed• Edges set and cut for filing gullets between saw teeth
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
3” 75mm Boxed 73530100 726606180136 12 840
3½” 90mm Boxed 73530200 726606180143 12 840
4” 100mm Boxed 73530300 726606179611 12 840
5” 125mm Boxed 73530400 726606180150 12 504
6” 150mm Boxed 73530500 726606179628 12 336
Taper Files - Heavy - Boxed
• Tapers slightly towards the point• Triangular shape• Boxed• Edges set and cut for filing gullets between saw teeth
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
7” 175mm Boxed 73521000 726606180129 12 144
Tap
er S
aw F
iles
TAPER SAW FILES
Taper Files - Slim - Boxed
• Tapers slightly towards the point• Triangular shape• Boxed• Edges set and cut for filing gullets between saw teeth
Taper Files - Extra Slim - Boxed
• Tapers slightly towards the point• Triangular shape• Boxed• Edges set and cut for filing gullets between saw teeth
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
4” 100mm Boxed 73535500 726606179635 12 1,200
5” 125mm Boxed 73536500 726606179642 12 1,080
6” 150mm Boxed 73537000 726606179659 12 480
7” 175mm Boxed 73537500 726606179666 12 360
8” 200mm Boxed 73538000 726606136096 12 192
10” 250mm Boxed 73538500 726606179673 12 96
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
4” 100mm Boxed 73547500 72660617968 12 1,200
5” 125mm Boxed 73548500 72660613610 12 1,080
6” 150mm Boxed 73549500 72660617969 12 480
Taper Files - Double Extra Slim - Boxed
• Tapers slightly towards the point• Triangular shape• Boxed• Edges set and cut for filing gullets between saw teeth
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
4” 100mm Boxed 73535500 726606179635 12 1,200
5” 125mm Boxed 73536500 726606179642 12 1,080
6” 150mm Boxed 73537000 726606179659 12 480
Taper S
aw Files
12 13
SPECIALTY FILES
• For sharpening round-hooded chain saw teeth• Safe point
Length Diameter Cat. UPC Shelf CartonInch mm Inch mm Packed No. No. Pack Pack
8” 200mm 1/8” 3.2mm 6pcs/Box 73740110 726606180228 60 600
8” 200mm 5/32” 4.0mm 6pcs/Box 73740210 726606180235 60 600
8” 200mm 3/16” 4.8mm 6pcs/Box 73740310 726606180242 60 600
8” 200mm 13/64” 5.2mm 6pcs/Box 73740810 726606180259 60 600
8” 200mm 7/32” 5.6mm 6pcs/Box 73740610 726606180266 60 600
Chain Saw Files - Round - Boxed
• Double-cut• Round shape• Boxed
Feather Edge Saw Files - Boxed
• Single-cut on sides and edges• Boxed
• Used for filing saws with tooth angle less than 60° • Diamond shape
Length Cat. UPC Shelf CartonInch mm Packed No. No. Pack Pack
3” 75mm Boxed 73541000 726606179840 12 432
4” 100mm Boxed 73541500 726606179857 12 432
5” 125mm Boxed 73541500 726606179864 12 360
6” 150mm Boxed 73541500 726606179871 12 240
Vixen® Curved Tooth Files
• Curved-cut milled teeth• Ptich and rake designed to avoid pinning and to provide smoothest finish
• Ideal for smooth, rapid work on cast iron, bronze, lead, babbit, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel• Rectangular shaped
Length No. of Teeth Cat. UPC Shelf CartonInch mm Per Inch/Cut Packed No. No. Pack Pack
14” 350mm 9/Standard Boxed 81115000 726606002292 6 48
Sp
ecia
lty
File
sHANDLED FILES
Cat. UPC Shelf CartonDescription No. No. Pack Pack
6" / 150mm Flat Bastard 78229601 726660600763 12 72
6" / 150mm Flat Smooth 78230701 726660600764 12 72
8" / 200mm Flat Bastard 78232101 726660600765 12 72
8" / 200mm Flat Smooth 78233101 726660600766 12 72
10" / 250mm Flat Bastard 78234101 726660600767 6 72
10" / 250mm Flat Smooth 78235101 726660600768 6 72
12" / 300mm Flat Bastard 78236101 726660600769 6 72
12" / 300mm Flat Smooth 78237101 726660600770 6 72
10" / 250mm Mill Bastard 78147601 726660600771 12 72
12" / 300mm Mill Bastard 78149601 726660600772 6 72
4" / 100mm Half Round Bastard 78315001 726660600773 12 72
4" / 100mm Half Round Smooth 78316001 726660600774 12 72
6" / 150mm Half Round Bastard 78317101 726660600775 12 72
6" / 150mm Half Round Smooth 78318101 726660600776 12 72
8" / 200mm Half Round Bastard 78319101 726660600777 12 72
8" / 200mm Half Round Smooth 78320101 726660600778 12 72
10" / 250mm Half Round Bastard 78321101 726660600779 6 72
10" / 250mm Half Round Smooth 78322101 726660600780 6 72
12" / 300mm Half Round Bastard 78233101 726660600781 6 72
12" / 300mm Half Round Smooth 78322401 726660600782 6 72
4" / 100mm Round Bastard 78393001 726660600783 12 72
4" / 100mm Round Smooth 78394001 726660600784 12 72
6" / 150mm Round Bastard 78396100 726660600785 12 72
6" / 150mm Round Smooth 78397101 726660600786 12 72
8" / 200mm Round Bastard 78398601 726660600787 12 72
8" / 200mm Round Smooth 78399601 726660600788 12 72
10" / 250mm Round Bastard 78400601 726660600789 12 72
10" / 250mm Round Smooth 78401501 726660600790 12 72
12" / 300mm Round Bastard 78402601 726660600791 6 72
12" / 300mm Round Smooth 78403501 726660600792 6 72
4" / 100mm XX Slim Taper 78560501 726660600801 12 72
4" / 100mm X Slim Taper 78547501 726660600802 12 72
4" / 100mm Slim Taper 78535501 726660600803 12 72
5" / 125mm Slim Taper 78536501 726660600804 12 72
6" / 150mm Slim Taper 78537001 726660600805 12 72
7" / 175mm Slim Taper 78537501 726660600806 12 72
8" / 200mm Slim Taper 78538001 726660600807 12 72
10" / 250mm Slim Taper 78538501 726660600808 12 72
8" / 200mm x 5/32" / 4.0mm Chainsaw 78740211 726660600809 12 72
8" / 200mm x 3/16" / 4.8mm Chainsaw 78740311 726660600810 12 72
8" / 200mm x 7/32" / 5.6mm Chainsaw 78740611 726660600811 12 72
Handled Files Hand
led Files
14 15
CARBIDE BURSC
arb
ide
Bur
s Tungsten Carbide Burs
Double-cut
Dimensions
Diam
eter
Overall Length
Packaging
Length
Shan
nk
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
A-13M 4.0mm 13.0mm 6.0mm 50.0mm 96007 97007
A-1M 6.0mm 16.0mm 6.0mm 55.0mm 96008 97008
A-2M 8.0mm 20.0mm 6.0mm 60.0mm 96009 97009
A-3M 10.0mm 20.0mm 6.0mm 60.0mm 96010 97010
A-4M 11.0mm 25.0mm 6.0mm 65.0mm 96124 97124
A-5M 12.0mm 25.0mm 6.0mm 65.0mm 96011 97011
A-6M 16.0mm 25.0mm 6.0mm 65.0mm 96012 97012
A-7M 19.0mm 25.0mm 6.0mm 65.0mm 96125 97125
Shape B - 6mm Shank
Shape C - 6mm Shank
Shape A - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
B-13M 4.0mm 13.0mm 6.0mm 50.0mm 96020 97020
B-1M 6.0mm 16.0mm 6.0mm 55.0mm 96021 97021
B-2M 8.0mm 20.0mm 6.0mm 60.0mm 96022 97022
B-3M 10.0mm 20.0mm 6.0mm 60.0mm 96023 97023
B-4M 11.0mm 25.0mm 6.0mm 65.0mm 96126 97126
B-5M 12.0mm 25.0mm 6.0mm 65.0mm 96024 97024
B-6M 16.0mm 25.0mm 6.0mm 65.0mm 96025 97025
B-9M 25.0mm 25.0mm 6.0mm 65.0mm 96127 97127
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
C-13M 4.0mm 16.0mm 6.0mm 50.0mm 96031 97031
C-1M 6.0mm 16.0mm 6.0mm 55.0mm 96032 97032
C-1M/L1 6.0mm 25.0mm 6.0mm 50.0mm 96128 97128
C-2M 8.0mm 20.0mm 6.0mm 60.0mm 96033 97033
C-3M 10.0mm 20.0mm 6.0mm 60.0mm 96034 97034
C-4M 11.0mm 25.0mm 6.0mm 65.0mm 96129 97129
C-5M 12.0mm 25.0mm 6.0mm 65.0mm 96035 97035
C-6M 16.0mm 25.0mm 6.0mm 65.0mm 96036 97036
Flute Styles
Aluminum Cut
Solid carbide burs are designed for machining materialsof virtually any hardness. They can be used for deburring,milling, chamfering, trimming, and cutting holes. Availablein both double-cut and aluminum cut versions, and in twelve shapes, they are able to handle a variety of applications.
Recommendations• Always operate the bur within the recommended RPM.• Select the appropriate shape, diameter and cut style for the application.• Use a smooth cutting action with constant movement in both directions.• Use light pressure, letting the bur do the work.
CARBIDE BURSC
arbid
e Burs
Shape D - 6mm Shank
Shape E - 6mm Shank
Shape F - 6mm Shank
Shape G - 6mm Shank
Shape H - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
D-13M 4.0mm 3.6mm 6.0mm 50.0mm 96042 97042
D-1M 6.0mm 5.4mm 6.0mm 45.0mm 96043 97043
D-2M 8.0mm 7.2mm 6.0mm 47.0mm 96044 97044
D-3M 10.0mm 9.0mm 6.0mm 49.0mm 96045 97045
D-4M 11.0mm 9.5mm 6.0mm 51.0mm 96130 97130
D-5M 12.0mm 10.8mm 6.0mm 51.0mm 96046 97046
D-6M 16.0mm 14.4mm 6.0mm 54.0mm 96047 97047
D-7M 19.0mm 16.0mm 6.0mm 60.0mm 96131 97131
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
E-1M 6.0mm 10.0mm 6.0mm 50.0mm 96051 97051
E-2M 8.0mm 13.0mm 6.0mm 53.0mm 96052 97052
E-3M 10.0mm 16.0mm 6.0mm 55.0mm 96053 97053
E-5M 12.0mm 20.0mm 6.0mm 60.0mm 96054 97054
E-6M 16.0mm 25.0mm 6.0mm 65.0mm 96055 97055
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
F-1M 6.0mm 18.0mm 6.0mm 58.0mm 96060 97060
F-2M 8.0mm 20.0mm 6.0mm 60.0mm 96061 97061
F-3M 10.0mm 20.0mm 6.0mm 60.0mm 96062 97062
F-4M 11.0mm 25.0mm 6.0mm 65.0mm 96134 97134
F-5M 12.0mm 25.0mm 6.0mm 65.0mm 96063 97063
F-6M 16.0mm 25.0mm 6.0mm 65.0mm 96064 97064
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
G-1M 6.0mm 18.0mm 6.0mm 58.0mm 96070 97070
G-2M 8.0mm 18.0mm 6.0mm 60.0mm 96071 97071
G-3M 10.0mm 20.0mm 6.0mm 60.0mm 96072 97072
G-5M 12.0mm 25.0mm 6.0mm 65.0mm 96073 97073
G-6M 16.0mm 25.0mm 6.0mm 65.0mm 96074 97074
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
H-1M 6.0mm 18.0mm 6.0mm 65.0mm 96077 97077
H-2M 8.0mm 20.0mm 6.0mm 65.0mm 96078 97078
H-3M 10.0mm 25.0mm 6.0mm 65.0mm 96079 97079
H-5M 12.0mm 32.0mm 6.0mm 65.0mm 96080 97080
H-6M 16.0mm 36.0mm 6.0mm 65.0mm 96081 97081
16 17
CARBIDE BURSC
arb
ide
Bur
s
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
J-1M 6.0mm 5.2mm 6.0mm 50.0mm 96082 97082
J-2M 8.0mm 7.0mm 6.0mm 52.0mm 96083 97083
J-3M 10.0mm 8.7mm 6.0mm 53.0mm 96084 97084
J-5M 12.0mm 10.4mm 6.0mm 55.0mm 96085 97085
J-6M 16.0mm 13.8mm 6.0mm 56.0mm 96086 97086
Shape J - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
K-1M 6.0mm 3.0mm 6.0mm 50.0mm 96087 97087
K-2M 8.0mm 4.0mm 6.0mm 50.0mm 96088 97088
K-3M 10.0mm 5.0mm 6.0mm 50.0mm 96089 97089
K-5M 12.0mm 6.0mm 6.0mm 51.0mm 96090 97090
K-6M 16.0mm 8.0mm 6.0mm 53.0mm 96091 97091
K-7M 19.0mm 17.5mm 6.0mm 65.0mm 96135 97135
Shape K - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
L-1M 6.0mm 16.0mm 6.0mm 56.0mm 96095 97095
L-2M 8.0mm 22.0mm 6.0mm 62.0mm 96096 97096
L-3M 10.0mm 25.0mm 6.0mm 65.0mm 96097 97097
L-4M 12.0mm 28.0mm 6.0mm 68.0mm 96098 97098
L-5M 16.0mm 33.0mm 6.0mm 73.0mm 96099 97099
Shape L - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
M-1M 6.0mm 12.7mm 6.0mm 50.0mm 96138 97138
M-2M 6.0mm 18.0mm 6.0mm 58.0mm 96105 97105
M-3M 8.0mm 17.0mm 6.0mm 57.0mm 96106 97106
M-4M 10.0mm 20.0mm 6.0mm 60.0mm 96107 97107
M-5M 12.0mm 25.0mm 6.0mm 65.0mm 96108 97108
M-6M 16.0mm 25.0mm 6.0mm 65.0mm 96109 97109
Shape M - 6mm Shank
Model Cutter Cutter Shank Overall UPC No. 726606No. Diameter Length Diameter Length Double Cut Alum. Cut
N-1M 6.0mm 8.0mm 6.0mm 50.0mm 96114 97114
N-2M 10.0mm 10.0mm 6.0mm 53.0mm 96115 97115
N-4M 12.0mm 12.0mm 6.0mm 57.0mm 96116 97116
N-6M 16.0mm 19.0mm 6.0mm 63.0mm 96117 97117
Shape N - 6mm ShankImage
Item No. 96016 96028 96039 96005 96017 96029 96040 96049 96058 96068 96076 96094 96103 96112
Model No. B52 C52 D52 A53 B53 C53 D53 E53 F53 G53 H53 L53 M53 N53
Cutter Diameter 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Cutter Length 12.7 12.7 3.8 12.7 12.7 12.7 4.7 7.1 12.7 12.7 9.5 12.7 12.7 6.3
Overall Length 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0
Image
Item No. 96137 96102 96110 96111 96006 96018 96019 96030 96041 96050 96059 96069 96104 96113 96004
Model No. M42L3 M43 N41 N42 A51 B51 B51EC C51 D51 E51 F51 G51 M51 N51 A52
Cutter Diameter 3.0 3.0 2.5 3.0 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 4.0
Cutter Length 11.0 16.0 3.0 4.0 12.7 4.7 12.7 12.7 5.0 9.5 12.7 12.7 12.7 6.0 12.7
Overall Length 75.0 38.0 38.0 38.0 50.0 43.0 50.0 50.0 44.0 47.0 50.0 50.0 54.0 44.0 38.0
Image
Item No. 96038 96048 96056 96057 96132 96133 96065 96066 96067 96075 96092 96093 96100 96101 96136
Model No. D42 E41 F41 F42 F42L2 F42L3 G41 G43 G44 H41 L41 L42 M41 M42 M42L2
Cutter Diameter 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
Cutter Length 3.0 5.5 6.0 12.0 12.7 12.7 6.0 10.0 12.0 6.0 5.5 12.0 8.7 11.0 11.0
Overall Length 38.0 38.0 38.0 38.0 50.0 75.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 38.0 50.0
CARBIDE BURSC
arbid
e BursImage
Item No. 96001 96002 96122 96003 96123 96013 96014 96015 96118 96119 96026 96027 96120 96121 96037
Model No. A41 A42 A42L2 A43 A43L3 B41 B42 B43 B43L2 B43L3 C41 C42 C42L2 C42L3 D41
Cutter Diameter 1.5 2.5 2.5 3.0 3.0 1.5 2.5 3.0 3.0 3.0 2.5 3.0 3.0 3.0 2.5
Cutter Length 6.0 11.0 11.0 14.0 14.0 6.0 11.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 2.5
Overall Length 38.0 38.0 50.0 38.0 75.0 38.0 38.0 38.0 50.0 75.0 38.0 38.0 50.0 75.0 38.0
Tungsten Carbide Burs - 3mm Shank
18 19
CIRCULAR SAW BLADES
Circular Saw Blades - For Wood• For use in circular saws• Carbide tips resists wear under extreme conditions• Blade made of the finist alloy steel• Expansion slots prevents blade wobble• Precision finished to exacting standards• Alternate tip bevel (ATB) grind for fast cutting• Fits all popular saws with 25.4mm or 30mm arbors• Sold in box packaging
Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf CartonInch mm Teeth Width Width Grind mm mm No. No. Pack Pack
4” 110mm 20T 1.2mm 2.2mm ATB 20mm 16mm 91108 726606911082 1 100
4” 110mm 24T 1.2mm 2.2mm ATB 20mm 16mm 91109 726606911099 1 100
4” 110mm 30T 1.2mm 2.2mm ATB 20mm 16mm 91110 726606911105 1 100
5” 125mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm 91125 726606911259 1 100
6” 150mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm 91149 726606911495 1 50
6” 150mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm 91150 726606911501 1 50
6” 150mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm 91151 726606911518 1 50
6½” 160mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm 91160 726606911600 1 50
6½” 160mm 50T 1.4mm 2.4mm ATB 25.4mm 20mm 91161 726606911617 1 50
7” 180mm 16T 1.4mm 2.4mm ATB 25.4mm 20mm 91178 726606911785 1 50
7” 180mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm 91179 726606911792 1 50
7” 180mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm 91180 726606911808 1 50
7” 180mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm 91181 726606911815 1 50
7¼” 184mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm 91184 726606911846 1 50
7¼” 184mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm 91185 726606911853 1 50
7½” 190mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm 91190 726606911907 1 50
7½” 190mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm 91191 726606911914 1 50
8” 200mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm 91197 726606911976 1 50
8” 200mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm 91198 726606911983 1 50
8” 200mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm 91199 726606911990 1 50
8” 200mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm 91200 726606912003 1 50
8” 200mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm 91201 726606912010 1 50
8” 200mm 80T 1.4mm 2.4mm ATB 25.4mm 20mm 91202 726606912027 1 50
Cir
cula
r S
aws
CIRCULAR SAW BLADES
Circular Saw Blades - For Wood
Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf CartonInch mm Teeth Width Width Grind mm mm No. No. Pack Pack
9” 230mm 20T 1.8mm 2.8mm ATB 25.4mm 20mm 91227 726606912270 1 25
9” 230mm 24T 1.8mm 2.8mm ATB 25.4mm 20mm 91228 726606912287 1 25
9” 230mm 30T 1.8mm 2.8mm ATB 25.4mm 20mm 91229 726606912294 1 25
9” 230mm 40T 1.8mm 2.8mm ATB 25.4mm 20mm 91230 726606912300 1 25
9” 230mm 60T 1.8mm 2.8mm ATB 25.4mm 20mm 91231 726606912317 1 25
9” 230mm 80T 1.8mm 2.8mm ATB 25.4mm 20mm 91232 726606912324 1 25
10” 254mm 16T 1.8mm 2.8mm ATB 25.4mm 20mm 91250 726606912508 1 25
10” 254mm 20T 1.8mm 2.8mm ATB 25.4mm 20mm 91251 726606912515 1 25
10” 254mm 24T 1.8mm 2.8mm ATB 25.4mm 20mm 91252 726606912522 1 25
10” 254mm 30T 1.8mm 2.8mm ATB 25.4mm 20mm 91253 726606912539 1 25
10” 254mm 40T 1.8mm 2.8mm ATB 25.4mm 20mm 91254 726606912546 1 25
10” 254mm 60T 1.8mm 2.8mm ATB 25.4mm 20mm 91255 726606912553 1 20
10” 254mm 80T 1.8mm 2.8mm ATB 25.4mm 20mm 91256 726606912560 1 20
10” 254mm 100T 1.8mm 2.8mm ATB 25.4mm 20mm 91257 726606912577 1 20
12” 305mm 16T 2.0mm 3.0mm ATB 25.4mm 20mm 91301 726606913017 1 20
12” 305mm 20T 2.0mm 3.0mm ATB 25.4mm 20mm 91302 726606913024 1 20
12” 305mm 24T 2.0mm 3.0mm ATB 25.4mm 20mm 91303 726606913031 1 20
12” 305mm 30T 2.0mm 3.0mm ATB 25.4mm 20mm 91304 726606913048 1 20
12” 305mm 40T 2.0mm 3.0mm ATB 25.4mm 20mm 91305 726606913055 1 20
12” 305mm 60T 2.0mm 3.0mm ATB 25.4mm 20mm 91306 726606913062 1 20
12” 305mm 80T 2.0mm 3.0mm ATB 25.4mm 20mm 91307 726606913079 1 20
12” 305mm 100T 2.0mm 3.0mm ATB 25.4mm 20mm 91308 726606913086 1 20
14” 355mm 20T 2.2mm 3.2mm ATB 30mm 25.4mm 91352 726606913529 1 10
14” 355mm 24T 2.2mm 3.2mm ATB 30mm 25.4mm 91353 726606913536 1 10
14” 355mm 30T 2.2mm 3.2mm ATB 30mm 25.4mm 91354 726606913543 1 10
14” 355mm 40T 2.2mm 3.2mm ATB 30mm 25.4mm 91355 726606913550 1 10
14” 355mm 60T 2.2mm 3.2mm ATB 30mm 25.4mm 91356 726606913567 1 10
14” 355mm 80T 2.2mm 3.2mm ATB 30mm 25.4mm 91357 726606913574 1 10
14” 355mm 100T 2.2mm 3.2mm ATB 30mm 25.4mm 91358 726606913581 1 10
16” 405mm 20T 2.5mm 3.5mm ATB 30mm 25.4mm 91361 726606913604 1 5
16” 405mm 24T 2.5mm 3.5mm ATB 30mm 25.4mm 91362 726606913611 1 5
16” 405mm 30T 2.5mm 3.5mm ATB 30mm 25.4mm 91363 726606913628 1 5
16” 405mm 40T 2.5mm 3.5mm ATB 30mm 25.4mm 91364 726606913635 1 5
20” 510mm 20T 3.0mm 4.0mm ATB 30mm 25.4mm 91370 726606913703 1 5
20” 510mm 24T 3.0mm 4.0mm ATB 30mm 25.4mm 91371 726606913710 1 5
20” 510mm 30T 3.0mm 4.0mm ATB 30mm 25.4mm 91372 726606913727 1 5
20” 510mm 40T 3.0mm 4.0mm ATB 30mm 25.4mm 91373 726606913734 1 5
24” 610mm 20T 3.0mm 4.0mm ATB 30mm 25.4mm 91374 726606913741 1 5
24” 610mm 24T 3.0mm 4.0mm ATB 30mm 25.4mm 91375 726606913758 1 5
24” 610mm 30T 3.0mm 4.0mm ATB 30mm 25.4mm 91376 726606913765 1 5
24” 610mm 40T 3.0mm 4.0mm ATB 30mm 25.4mm 91377 726606913772 1 5
Circular S
aws
20 21
CIRCULAR SAW BLADES
Circular Saw Blades - For Aluminum• For cutting non-ferrous metals such as aluminum• Carbide tips resists wear under extreme conditions• Blade made of the finist alloy steel• Expansion slots prevents blade wobble• Precision finished to exacting standards• Triple Chip Grind (TCG) grind for smooth cutting• Fits all popular saws with 25.4mm or 30mm arbors• Sold in box packaging
Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf CartonInch mm Teeth Width Width Grind mm mm No. No. Pack Pack
4” 110mm 28T 1.2mm 2.2mm TCG 20mm 16mm 92110 726606921104 1 100
7¼” 184mm 60T 1.4mm 2.4mm TCG 25.4mm 20mm 92184 726606921845 1 50
10” 254mm 80T 1.8mm 2.8mm TCG 25.4mm 20mm 92254 726606922545 1 20
10” 254mm 100T 1.8mm 2.8mm TCG 25.4mm 20mm 92255 726606922552 1 20
10” 254mm 120T 1.8mm 2.8mm TCG 25.4mm 20mm 92256 726606922569 1 20
12” 305mm 80T 2.0mm 3.0mm TCG 25.4mm 20mm 92305 726606923054 1 20
12” 305mm 100T 2.0mm 3.0mm TCG 25.4mm 20mm 92306 726606923061 1 20
12” 305mm 120T 2.0mm 3.0mm TCG 25.4mm 20mm 92307 726606923078 1 20
14” 355mm 80T 2.2mm 3.2mm TCG 30mm 25.4mm 93355 726606933559 1 10
14” 355mm 100T 2.2mm 3.2mm TCG 30mm 25.4mm 93356 726606933566 1 10
14” 355mm 120T 2.2mm 3.2mm TCG 30mm 25.4mm 93357 726606933573 1 10
Cir
cula
r S
aws
CIRCULAR SAW BLADES
Brushcutter Blades - For Brush• For use in brush cutters• Blade coated with black oxide to resist rust• Blade made of the finist alloy steel• Teeth can be reset and sharpened• Precision finished to exacting standards• Fits brush cutters with 25.4mm arbors• Sold in clamshell packaging
Diameter Blade Tip Tooth Arbor Bushing Cat. UPC Shelf CartonInch mm Teeth Thickness Kerf Pattern mm mm No. No. Pack Pack
10” 254mm 80T 1.6mm 2.0mm Offset 25.4mm None 92254 726606922545 1 20
Brushcutters
22 23
ABRASIVE WHEELS
Diamond Wheels - For Masonry• For cutting masonry materials such as tile & brick• Cuts 70 times longer than abrasive wheels• Turbo continuous rim design for wet & dry cutting• Expansion hole pattern prevents blade wobble• Hard diamond grit welded to cutting edge• Fits all popular saws with 20mm or 25.4mm arbors• Sold in clamshell packaging
• For cutting masonry materials • Segmented for wet & dry cutting• Turbo for wet & dry cutting• Continuous for wet cutting• Hot pressed for longer durability• Sold in clamshell packaging• Also available in 7” (180mm)
Diameter Rim Blade Rim Arbor Bushing Cat. UPC Shelf CartonInch mm Type Width Height mm mm No. No. Pack Pack
4” 105mm Turbo 1.2mm 5.0mm 20mm 16mm 89105 726606891056 1 100
4” 105mm Turbo 2.0mm 5.0mm 20mm 16mm 89108 726606891087 1 100
5” 125mm Turbo 1.2mm 7.0mm 22mm 20mm 89106 726606891063 1 50
5” 125mm Turbo 2.0mm 7.0mm 22mm 20mm 89109 726606891094 1 50
6” 150mm Turbo 2.2mm 7.0mm 22mm 20mm 89110 726606891100 1 50
7” 180mm Turbo 2.6mm 7.0mm 22mm 20mm 89111 726606891117 1 50
8” 200mm Turbo 2.6mm 7.0mm 22mm 20mm 89112 726606891124 1 25
9” 230mm Turbo 3.1mm 7.0mm 22mm 20mm 89113 726606891131 1 25
10” 250mm Turbo 3.1mm 7.0mm 22mm 20mm 89114 726606891148 1 25
12” 300mm Turbo 3.2mm 7.0mm 22mm 20mm 89115 726606891155 1 10
14” 350mm Turbo 3.4mm 7.0mm 25.4mm 20mm 89116 726606891162 1 10
Diameter Rim Blade Rim Arbor Bushing Cat. UPC Shelf CartonInch mm Type Width Height mm mm No. No. Pack Pack
4” 105mm Segmented 1.8mm 7.0mm 20mm 16mm 40043 72660618275 1 50
4” 105mm Turbo 1.2mm 7.0mm 20mm 16mm 40044 72660618276 1 50
4” 105mm Continuous 1.8mm 7.0mm 20mm 16mm 40044 72660618277 1 50
Ab
rasi
ve W
heel
s Ab
rasive Wheels
Cut-Off Wheels - For Steel
Grinding Wheels - For Steel
• For use in angle grinders and chop saws• Cuts hard metal materials including stainless steel• Thin-kerf design for faster, more efficient cutting• White aluminum oxide grit (WA46) for extreme cutting • Reinforced with double-weave fiberglasss mesh• Specially treated grain combination for aggressive cutting• Packed in attractive cardboard boxes
• For use in angle grinders• Cuts hard metal materials including stainless steel• White aluminum oxide grit (WA46) for extreme cutting • Reinforced with double-weave fiberglasss mesh• Specially treated grain combination for aggressive grinding
Diameter Thickness Arbor Max. UPC No. 726606 Shelf CartonInch mm Inch mm Inch mm RPM Stainless Metal Pack Pack
4” 100mm 0.25” 6.0mm 5/8" 16.0mm 15,250 90300 90305 10 200
5” 125mm 0.25” 6.0mm 7/8" 22.0mm 12,200 90301 90306 10 100
6” 150mm 0.25” 6.0mm 7/8" 22.0mm 10,200 90302 90307 10 100
7” 180mm 0.25” 6.0mm 7/8" 22.0mm 8,500 90303 90308 10 50
9” 230mm 0.25” 6.0mm 7/8" 22.0mm 6,700 90304 90309 10 20
CIRCULAR SAW BLADES
Diameter Thickness Arbor Max. UPC No. 726606 Shelf CartonInch mm Inch mm Inch mm RPM Stainless Metal Pack Pack
4” 105mm 0.040'' 1.0mm 5/8" 16.0mm 15,250 90100 90200 25 400
4” 105mm 0.079'' 2.0mm 5/8" 16.0mm 15,250 90101 90201 25 400
5” 125mm 0.047'' 1.2mm 5/8" 16.0mm 12,200 90102 90202 25 400
6” 150mm 0.047'' 1.2mm 7/8" 22.0mm 10,200 90103 90203 25 300
6” 150mm 0.079'' 2.0mm 7/8" 22.0mm 10,200 90104 90204 25 300
7” 180mm 0.063'' 1.6mm 7/8" 22.0mm 8,500 90105 90205 25 200
7” 180mm 0.098'' 2.5mm 7/8" 22.0mm 8,500 90106 90206 25 200
12” 300mm 0.118'' 3.0mm 1" 25.4mm 6,300 90107 90207 1 25
14” 350mm 0.118'' 3.0mm 1" 25.4mm 5,400 90108 90208 1 25
16” 400mm 0.118'' 3.0mm 1" 25.4mm 4,400 90109 90209 1 25
24 25
HACKSAW BLADES
• For cutting various metals including alloys and stainless steels• Made of fully hardened high speed steel for durability• Lasts up to 10 times longer than carbon steel blades• Cutting edges are vacuum heat treated to Rc 65-67• Packed in 100pc plastic boxes for adequate protection
Model Tooth Cat. Length Teeth Width Gauge UPC Shelf CartonNo. Set No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack
SA1214 Wavy 31512140 12” 300mm 14 TPI 1/2” 12.7mm .025” 0.65mm 726606052334 100 1,000
SA1218 Wavy 31512180 12” 300mm 18 TPI 1/2” 12.7mm .025” 0.65mm 726606052341 100 1,000
SA1224 Wavy 31512240 12” 300mm 24 TPI 1/2” 12.7mm .025” 0.65mm 726606052358 100 1,000
SA1232 Wavy 31512320 12” 300mm 32 TPI 1/2” 12.7mm .025” 0.65mm 726606052365 100 1,000
Hand Hacksaw Blades - All-Hard HSS
• For cutting various metals including alloys and stainless steels• Made of flexible spring steel back welded to HSS tooth line• Lasts up to 10 times longer than carbon steel blades• Cutting edges are vacuum heat treated to Rc 65-67• Packed in 100pc plastic boxes for adequate protection
Hand Hacksaw Blades - Bi-Metal
Hand Hacksaw Blades - Care and ServicingGeneral Tooth Recommendations14 Tooth: For cutting stock 1”/25.4mm or over in cross section. For soft materials where maximum chip clearance is needed.18 Tooth: For general shop use, when blade is used on several jobs.24 Tooth: For cross section 1/16” (1.58mm) - 1/4” (6.35mm) such as pipe, angles, small drill rod.
32 Tooth: To cut stock up to 1/16” (1.58mm) such as light tubing, sheet metal
Choose the Right Number of Teeth Per InchThe coarseness of the teeth affects blade efficiency. Speed varies according to the material being cut and the saw blade coarseness.
Starting the CutIf possible, avoid starting cuts on sharp corners. When unavoidable, begin with light pressure and use a steady forward stroke. As many teeth as possible should be in contact with the cutting area and at least three teeth must be engaged.
Rounded Teeth - Premature Wear1. Blade not cutting. Use slower stroke and apply heavier feed. 2. Dragging on return stroke. Lift saw.3. Material too hard. Select proper blade.
Tooth Breakage1. Teeth too coarse. Keep three teeth in the work.2. Too much feed, teeth loading. Ease feed pressure.3. Teeth too fine, clogging. Change to coarser tooth.4. Starting cut on sharp corner. Reposition work.
Blade Breakage1. Lack of tension. Tighten until taught.2. Too much tension. Loosen slightly.3. Cutting in awkward position. Use flexible type blades.4. Jamming in cut. Hold work securely - stock should fall free after cut. In soft material teeth may be binding because they are too fine.
Hacksaw
Blad
esModel Tooth Cat. Length Teeth Width Gauge UPC Shelf CartonNo. Set No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack
SB1214 Wavy 32512140 12” 300mm 14 TPI 1/2” 12.7mm .025” 0.65mm 726606052297 100 1,000
SB1218 Wavy 32512180 12” 300mm 18 TPI 1/2” 12.7mm .025” 0.65mm 726606052303 100 1,000
SB1224 Wavy 32512240 12” 300mm 24 TPI 1/2” 12.7mm .025” 0.65mm 726606052310 100 1,000
SB1232 Wavy 32512320 12” 300mm 32 TPI 1/2” 12.7mm .025” 0.65mm 726606052317 100 1,000
ABRASIVE WHEELS
Flap Discs - For Steel• For use in angle grinders to quickly remove material• Much faster than traditional grinding wheels• Aluminum Oxide (black) abrasive for all-purpose use • Zirconia Alumina (blue) abrasive for maximum durability• Durable fiberglass backing plate absorbs vibration• Available in either flat (Type 27) or angled (Type 29) shape• Meets European and U.S. standards for coated abrasives• Packed in attractive cardboard boxes
Diameter Blade Arbor Max. Aluminum Oxide (SG-A) Zirconia Alumina (SG-Z) Shelf CartonInch mm Grit Inch mm RPM Type 27 Type 29 Type 27 Type 29 Pack Pack
4” 105mm 40 5/8" 16.0mm 15,300 90400 90500 90600 90700 10 100
4” 105mm 60 5/8" 16.0mm 15,300 90401 90501 90601 90701 10 100
4” 105mm 80 5/8" 16.0mm 15,300 90402 90502 90602 90702 10 100
4” 105mm 120 5/8" 16.0mm 15,300 90403 90503 90603 90703 10 100
4-1/2” 115mm 40 7/8" 22.0mm 13,300 90404 90504 90604 90704 10 100
4-1/2” 115mm 60 7/8" 22.0mm 13,300 90405 90505 90605 90705 10 100
4-1/2” 115mm 80 7/8" 22.0mm 13,300 90406 90506 90606 90706 10 100
4-1/2” 115mm 120 7/8" 22.0mm 13,300 90407 90507 90607 90707 10 100
5” 125mm 40 7/8" 22.0mm 12,200 90408 90508 90608 90708 10 100
5” 125mm 60 7/8" 22.0mm 12,200 90409 90509 90609 90709 10 100
5” 125mm 80 7/8" 22.0mm 12,200 90410 90510 90610 90710 10 100
5” 125mm 120 7/8" 22.0mm 12,200 90411 90511 90611 90711 10 100
6” 150mm 40 7/8" 22.0mm 10,200 90412 90512 90612 90712 10 50
6” 150mm 60 7/8" 22.0mm 10,200 90413 90513 90613 90713 10 50
6” 150mm 80 7/8" 22.0mm 10,200 90414 90514 90614 90714 10 50
6” 150mm 120 7/8" 22.0mm 10,200 90415 90515 90615 90715 10 50
7” 175mm 40 7/8" 22.0mm 8,600 90416 90516 90616 90716 10 50
7” 175mm 60 7/8" 22.0mm 8,600 90417 90517 90617 90717 10 50
7” 175mm 80 7/8" 22.0mm 8,600 90418 90518 90618 90718 10 50
7” 175mm 120 7/8" 22.0mm 8,600 90419 90519 90619 90719 10 50
Ab
rasi
ve W
heel
s
26 27
RECIPROCATING SAW BLADES
• For use in electric or cordless reciprocating saws to cut metal• Made of flexible spring steel back welded to HSS tooth line• Lasts up to 10 times longer than carbon steel blades• Cutting edges are vacuum heat treated to Rc 65-67• Packed in 5pc clamshell boxes for adequate protection
Model Set Cat. Length Teeth Width Gauge UPC Shelf CartonNo. Type No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack
610 Wavy 38610TS0 6” 150mm 10 TPI 3/4” 19mm 0.035” 0.9mm 726606081402 5 500
614 Wavy 38614TS0 6” 150mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081419 5 500
618 Wavy 38618TS0 6” 150mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081426 5 500
624 Wavy 38624TS0 6” 150mm 18 TPI 3/4” 19mm 0.035” 0.9mm 726606081433 5 500
810 Wavy 38810TS1 8” 200mm 10 TPI 3/4” 19mm 0.035” 0.9mm 726606081440 5 500
814 Wavy 38814TS1 8” 200mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081457 5 500
818 Wavy 38818TS1 8” 200mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081464 5 500
824 Wavy 38824TS1 8” 200mm 18 TPI 3/4” 19mm 0.035” 0.9mm 726606081471 5 500
910 Wavy 38910TS0 9” 230mm 10 TPI 3/4” 19mm 0.035” 0.9mm 726606081488 5 500
914 Wavy 38914TS0 9” 230mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081495 5 500
918 Wavy 38918TS0 9” 230mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081501 5 500
924 Wavy 38924TS0 9” 230mm 18 TPI 3/4” 19mm 0.035” 0.9mm 726606081518 5 500
Reciprocating Saw Blades - Bi-Metal
• For use in pneumatic reciprocating saws to cut metal• Made of flexible spring steel back welded to HSS tooth line• Lasts up to 10 times longer than carbon steel blades• Cutting edges are vacuum heat treated to Rc 65-67• Packed in 5pc clamshell boxes for adequate protection
Air Saw Blades - Bi-MetalRec
ip B
lad
es
Model Set Cat. Length Teeth Width Gauge UPC Shelf CartonNo. Type No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack
A14 Wavy 38A11010 3” 75mm 14 TPI 3/4” 19mm 0.035” 0.9mm 726606081525 5 500
A18 Wavy 38A18010 3” 75mm 18TPI 3/4” 19mm 0.035” 0.9mm 726606081532 5 500
A24 Wavy 38A24010 3” 75mm 24 TPI 3/4” 19mm 0.035” 0.9mm 726606081549 5 500
A32 Wavy 38A32010 3” 75mm 32 TPI 3/4” 19mm 0.035” 0.9mm 726606081556 5 500
• For use on magnetic drills• Universal shank• Most efficient method of cutting holes in metals• Also available in 35mm cutting depth• Also available in full High Speed Steel body• Guide pins available in 2 sizes• Packed in individual boxes for protection
Model Cat. Diameter Cutting Depth Overall Length Shank UPC Shelf CartonNo. No. Inch mm Inch mm Inch mm mm type No. Pack Pack
98150 AC1250C 12 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698130 1 50
98151 AC1350C 13 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698131 1 50
98152 AC1450C 9/16” 14 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698132 1 50
98153 AC1550C 15 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698133 1 50
98154 AC1650C 5/8” 16 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698134 1 50
98155 AC1750C 11/16” 17 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698135 1 50
98156 AC1850C 18 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698136 1 50
98157 AC1950C 3/4” 19 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698137 1 50
98158 AC2050C 20 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698138 1 50
98159 AC2150C 13/16” 21 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698139 1 50
98160 AC2250C 7/8” 22 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698140 1 50
98161 AC2350C 23 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698141 1 50
98162 AC2450C 15/16” 24 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698142 1 50
98163 AC2550C 1” 25 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698143 1 20
98164 AC2650C 26 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698144 1 20
98165 AC2750C 1-1/16” 27 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698145 1 20
98166 AC2850C 28 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698146 1 20
98167 AC2950C 1-1/8” 29 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698147 1 20
98168 AC3050C 1-3/16” 30 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698148 1 20
98169 AC3150C 31 mm 2" 50 mm 3-3/4” 95 mm 19 mm Universal 72660698149 1 20
98170 AC3250C 1-1/4” 32 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698150 1 20
98171 AC3350C 1-5/16” 33 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698151 1 20
98172 AC3450C 34 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698152 1 20
98173 AC3550C 1-3/8” 35 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698153 1 20
98174 AC3650C 36 mm 2" 50 mm 3-3/4” 95 mm 19 mm Universal 72660698154 1 20
98175 AC3750C 1-7/16” 37 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698155 1 20
98176 AC3850C 1-1/2” 38 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698156 1 20
98177 AC3950C 39 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698157 1 20
98178 AC4050C 1-9/16” 40 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698158 1 20
98179 AC4150C 1-5/8” 41 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698159 1 20
98180 AC4250C 42 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698160 1 20
98181 AC4350C 1-11/16” 43 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698161 1 20
98182 AC4450C 1-3/4” 44 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698162 1 20
98183 AC4550C 45 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698163 1 20
98184 AC4650C 1-13/16” 46 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698164 1 20
98185 AC4750C 47 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698165 1 20
98186 AC4850C 1-7/8” 48 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698166 1 20
98187 AC4950C 49 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698167 1 20
98188 AC5050C 50 mm 2” 50 mm 3-3/4” 95 mm 19 mm Universal 72660698168 1 20
Annular cutters - Carbide tipped
HOLE SAWSA
nnular Cutters
28 29
HOLE SAWS
Model Cat. Diameter Pipe Tap Pipe Entrance Arbor UPC Shelf CartonNo. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack
92BHS 36005800 3-5/8" 92mm 5/8" 16.0mm 726606182468 1 30
95BHS 36006000 3-3/4" 95mm 3" 76mm 5/8" 16.0mm 726606182475 1 30
98BHS 36006200 3-7/8" 98mm 3-1/2" 89mm 5/8" 16.0mm 726606182482 1 30
102BHS 36006400 4" 102mm 5/8" 16.0mm 726606182499 1 30
105BHS 36006600 4-1/8" 105mm 3-1/2" 89mm 5/8" 16.0mm 726606182505 1 30
108BHS 36006800 4-1/4" 108mm 4" 102mm 5/8" 16.0mm 726606182512 1 30
111BHS 36007000 4-3/8" 111mm 5/8" 16.0mm 726606182529 1 30
114BHS 36007200 4-1/2" 114mm 5/8" 16.0mm 726606182536 1 30
121BHS 36007600 4-3/4" 121mm 4-1/2" 114mm 4" 102mm 5/8" 16.0mm 726606182543 1 20
127BHS 36008000 5" 127mm 5/8" 16.0mm 726606182550 1 20
133BHS 36008400 5-1/4" 133mm 5/8" 16.0mm 726606182567 1 20
140BHS 36008800 5-1/2" 140mm 5/8" 16.0mm 726606182574 1 20
146BHS 36009200 5-3/4" 146mm 5/8" 16.0mm 726606182581 1 20
152BHS 36009600 6" 152mm 5/8" 16.0mm 726606182598 1 20
Hole Saws - Bi-Metal
Model Cat. Diameter Pipe Tap Pipe Entrance Shangk UPC Shelf CartonNo. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack
5DHS 36035005 13/64" 5mm 1/4" 6.35mm 726606182000 10 60
6DHS 36035006 1/4" 6mm 3" 76mm 1/4" 6.35mm 726606182017 10 60
7DHS 36035007 9/32" 7mm 3-1/2" 89mm 1/4" 6.35mm 726606182024 10 60
8DHS 36035008 5/16" 8mm 1/4" 6.35mm 726606182031 10 60
10DHS 36035010 13/32" 10mm 1/4" 6.35mm 726606182048 10 60
12DHS 36035012 1/2" 12mm 1/4" 6.35mm 726606182055 10 60
15DHS 36035015 19/32" 15mm 1/4" 6.35mm 726606182062 10 60
20DHS 36035020 13/16" 20mm 1/4" 6.35mm 726606182079 10 60
Hole Saws - Diamond Grit• For cutting holes in ceramic tile• Threads on head surface deliver cleaner cuts• Patented vacuum brazed diamond grit for durability• Lasts 20 times longer than normal diamond grit hole saws• Quick change universal shank for easy discharging• Packed in reusable tubes for easy storage
Ho
le Saw
sHOLE SAWS
• For cutting holes in metal and wood• Bi-metal construction with cobalt tooth tip• Improved tooth geometry for 20% faster cutting• Simonds vari-gullet design cleans chip faster• Rugged 3/16” back plaste for increased stability• 4/6 variable pitch tooth reduces vibration• Packed in individual blister packs for protection
• Also available;• FLEEM GROUND teeth geometry• Cuts up to 50% faster, and upto 25% longer life• Bi-metal construction with 8% cobalt tooth tip• Wide slots on side walls for increased visibility during cutting• Rugged 3/16” back plaste for increased stability• 4/6 variable pitch tooth reduces vibration• Packed in individual blister packs for protection
Model Cat. Diameter Pipe Tap Pipe Entrance Arbor UPC Shelf CartonNo. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack
14BHS 36000900 9/16" 14mm 1/2" 25.4mm 726606182086 1 200
16BHS 36001000 5/8" 16mm 1/2" 25.4mm 726606182093 1 200
17BHS 36001100 11/16" 17mm 1/2" 25.4mm 726606182109 1 200
19BHS 36001200 3/4" 19mm 1/2" 13mm 3/8" 10mm 1/2" 25.4mm 726606182116 1 200
21BHS 36001300 13/16" 21mm 1/2" 25.4mm 726606182123 1 200
22BHS 36001400 7/8" 22mm 3/4" 19mm 1/2" 13mm 1/2" 25.4mm 726606182130 1 200
24BHS 36001500 15/16" 24mm 1/2" 25.4mm 726606182147 1 200
25BHS 36001600 1" 25mm 1/2" 25.4mm 726606182154 1 200
27BHS 36001700 1-1/16" 27mm 1/2" 25.4mm 726606182161 1 200
29BHS 36001800 1-1/8" 29mm 1" 25mm 3/4" 19mm 1/2" 25.4mm 726606182178 1 200
30BHS 36001900 1-3/16" 30mm 1/2" 25.4mm 726606182185 1 200
32BHS 36002000 1-1/4" 32mm 5/8" 16.0mm 726606182192 1 200
33BHS 36002100 1-5/16" 33mm 5/8" 16.0mm 726606182208 1 200
35BHS 36002200 1-3/8" 35mm 1" 25mm 5/8" 16.0mm 726606182215 1 200
37BHS 36002300 1-7/16" 37mm 5/8" 16.0mm 726606182222 1 100
38BHS 36002400 1-1/2" 38mm 1-1/4" 32mm 5/8" 16.0mm 726606182239 1 100
40BHS 36002500 1-9/16" 40mm 5/8" 16.0mm 726606182246 1 100
41BHS 36002600 1-5/8" 41mm 5/8" 16.0mm 726606182253 1 100
43BHS 36002700 1-11/16" 43mm 5/8" 16.0mm 726606182260 1 100
44BHS 36002800 1-3/4" 44mm 1-1/2" 38mm 1-1/4" 32mm 5/8" 16.0mm 726606182277 1 100
46BHS 36002900 1-13/16" 46mm 5/8" 16.0mm 726606182284 1 100
48BHS 36003000 1-7/8" 48mm 5/8" 16.0mm 726606182291 1 100
51BHS 36003200 2" 51mm 1-1/2" 38mm 5/8" 16.0mm 726606182307 1 100
54BHS 36003400 2-1/8" 54mm 5/8" 16.0mm 726606182321 1 100
57BHS 36003600 2-1/4" 57mm 2" 51mm 5/8" 16.0mm 726606182338 1 100
59BHS 36003700 2-5/16" 59mm 5/8" 16.0mm 726606182345 1 100
60BHS 36003800 2-3/8" 60mm 5/8" 16.0mm 726606182352 1 100
63BHS 36004000 2-1/2" 63mm 2" 51mm 5/8" 16.0mm 726606182369 1 100
65BHS 36004100 2-9/16" 65mm 5/8" 16.0mm 726606182376 1 50
67BHS 36004200 2-5/8" 67mm 2-1/2" 63mm 5/8" 16.0mm 726606182383 1 50
70BHS 36004400 2-3/4" 70mm 5/8" 16.0mm 726606182390 1 50
76BHS 36004800 3" 76mm 2-1/2" 63mm 5/8" 16.0mm 726606182413 1 50
79BHS 36005000 3-1/8" 79mm 5/8" 16.0mm 726606182420 1 50
83BHS 36005200 3-1/4" 83mm 3" 76mm 5/8" 16.0mm 726606182437 1 50
86BHS 36005400 3-3/8” 86mm 5/8" 16.0mm 726606182444 1 50
89BHS 36005600 3-1/2” 89mm 5/8" 16.0mm 726606182451 1 50
Hole Saws - Bi-Metal
Ho
le S
aws
30 31
MASONRY DRILLS
Masonry Drill Bits
• For drilling hard masonry materials• Unique diamond ground carbide tip for faster holes• Extra hard, thicker, and more robust cardide tip
• Ground flutes helps remove material faster • Professional surface treatment finish resists corrosion• Packed in reusable tubes for easy storage
* Additional sizes available upon request
Mas
onr
y D
rills
Diameter Working Overall Item Shelf Cartonmm Inch Length Length Shank No. UPC No. Packaging Pack Pack
3.0mm 1/8” 40mm 70mm CYL 51213450 726606180280 Plastic Tube 10 200
3.5mm 45mm 75mm CYL 51213451 726606180297 Plastic Tube 10 200
4.0mm 45mm 80mm CYL 51213452 726606180303 Plastic Tube 10 200
4.5mm 45mm 85mm CYL 51213453 726606180310 Plastic Tube 10 200
5.0mm 3/16” 50mm 90mm CYL 51213454 726606180327 Plastic Tube 10 200
5.5mm 55mm 95mm CYL 51213455 726606180334 Plastic Tube 10 200
6.0mm 60mm 100mm CYL 51213456 726606180341 Plastic Tube 10 200
6.5mm 1/4” 60mm 105mm CYL 51213457 726606180358 Plastic Tube 10 200
6.5mm 1/4” 115mm 165mm CYL 51213458 726606180365 Plastic Tube 10 200
7.0mm 65mm 110mm CYL 51213459 726606180372 Plastic Tube 10 200
7.5mm 70mm 115mm CYL 51213460 726606180389 Plastic Tube 10 200
8.0mm 5/16” 70mm 120mm CYL 51213461 726606180396 Plastic Tube 10 200
8.0mm 5/16” 110mm 160mm CYL 51213462 726606180402 Plastic Tube 10 200
8.5mm 75mm 120mm CYL 51213463 726606180419 Plastic Tube 10 200
9.0mm 80mm 130mm CYL 51213464 726606180426 Plastic Tube 10 200
9.5mm 3/8” 85mm 135mm CYL 51213465 726606180433 Plastic Tube 10 200
9.5mm 3/8” 110mm 160mm CYL 51213466 726606180440 Plastic Tube 10 200
10.0mm 90mm 140mm CYL 51213467 726606180457 Plastic Tube 10 200
11.0mm 7/16” 105mm 160mm CYL 51213468 726606180464 Plastic Tube 10 100
12.0mm 105mm 160mm CYL 51213469 726606180471 Plastic Tube 10 100
13.0mm 1/2” 100mm 160mm CYL 51213470 726606180488 Plastic Tube 10 100
14.0mm 9/16” 100mm 160mm CYL 51213471 726606180495 Plastic Tube 10 100
15.0mm 100mm 160mm CYL 51213472 726606180501 Plastic Tube 5 50
16.0mm 5/8” 85mm 160mm CYL 51213473 726606180518 Plastic Tube 5 50
17.0mm 11/16” 80mm 160mm CYL 51213474 726606180525 Plastic Tube 5 50
18.0mm 80mm 160mm CYL 51213475 726606180549 Plastic Tube 5 50
19.0mm 3/4” 80mm 160mm CYL 51213476 726606180556 Plastic Tube 5 50
20.0mm 13/16” 80mm 160mm CYL 51213477 726606180563 Plastic Tube 5 50
22.0mm 7/8” 80mm 160mm CYL 51213478 726606180570 Plastic Tube 5 50
24.0mm 15/16” 80mm 160mmm CYL 51213479 726606180587 Plastic Tube 1 25
25.0mm 1” 80mm 160mm CYL 51213480 726606180594 Plastic Tube 1 25
HAMMER DRILLS
Hammer Drill Bits
• For use in rotary hammer drills to drill concrete• Unique diamond ground carbide tip for faster holes• Extra hard, thicker, and more robust cardide tip
• Ground flutes helps remove material faster • Professional surface treatment finish resists corrosion• Packed in reusable tubes for easy storage
Ham
mer D
rills
Diameter Working Overall Item Shelf Cartonmm Inch Length Length Shank No. UPC No. Packaging Pack Pack
3.0mm 1/8” 25mm 85mm SDS+ 54150320 726606180679 Plastic Tube 10 200
3.5mm 50mm 110mm SDS+ 54150321 726606180686 Plastic Tube 10 200
4.0mm 50mm 110mm SDS+ 54150322 726606180693 Plastic Tube 10 200
5.0mm 3/16” 50mm 110mm SDS+ 54150323 726606180709 Plastic Tube 10 200
5.0mm 3/16” 100mm 160mm SDS+ 54150324 726606180716 Plastic Tube 10 200
5.5mm 50mm 110mm SDS+ 54150325 726606180723 Plastic Tube 10 200
5.5mm 100mm 160mm SDS+ 54150326 726606180730 Plastic Tube 10 200
6.0mm 50mm 110mm SDS+ 54150327 726606180747 Plastic Tube 10 200
6.0mm 100mm 160mm SDS+ 54150328 726606180754 Plastic Tube 10 200
6.0mm 150mm 210mm SDS+ 54150329 726606180761 Plastic Tube 10 100
6.0mm 200mm 260mm SDS+ 54150330 726606180778 Plastic Tube 10 100
6.5mm 1/4” 50mm 110mm SDS+ 54150331 726606180785 Plastic Tube 10 200
6.5mm 1/4” 100mm 160mm SDS+ 54150332 726606180792 Plastic Tube 10 200
6.5mm 1/4” 150mm 210mm SDS+ 54150333 726606180808 Plastic Tube 10 200
6.5mm 1/4” 200mm 260mm SDS+ 54150334 726606180815 Plastic Tube 10 100
7.0mm 50mm 110mm SDS+ 54150335 726606180822 Plastic Tube 10 200
7.0mm 100mm 160mm SDS+ 54150336 726606180839 Plastic Tube 10 200
8.0mm 5/16” 50mm 110mm SDS+ 54150337 726606180846 Plastic Tube 10 200
8.0mm 5/16” 100mm 160mm SDS+ 54150338 726606180853 Plastic Tube 10 200
8.0mm 5/16” 150mm 210mm SDS+ 54150339 726606180860 Plastic Tube 10 100
8.0mm 5/16” 240mm 300mm SDS+ 54150341 726606180884 Plastic Tube 5 100
8.0mm 5/16” 290mm 350mm SDS+ 54150342 726606180891 Plastic Tube 10 100
9.0mm 100mm 160mm SDS+ 54150343 726606180907 Plastic Tube 10 200
9.0mm 150mm 210mm SDS+ 54150344 726606180914 Plastic Tube 10 100
9.5mm 3/8” 100mm 160mm SDS+ 54150345 726606180921 Plastic Tube 10 200
9.5mm 3/8” 150mm 210mm SDS+ 54150346 726606180938 Plastic Tube 10 100
9.5mm 3/8” 290mm 350mm SDS+ 54150347 726606180945 Plastic Tube 10 100
9.5mm 3/8” 400mm 460mm SDS+ 54150348 726606180952 Plastic Tube 10 50
10.0mm 50mm 110mm SDS+ 54150349 726606180969 Plastic Tube 10 200
10.0mm 100mm 160mm SDS+ 54150350 726606180976 Plastic Tube 10 200
10.0mm 80mm 160mm SDS+ 54150351 726606180983 Plastic Tube 10 100
10.0mm 240mm 300mm SDS+ 54150353 726606181003 Plastic Tube 10 100
10.0mm 290mm 350mm SDS+ 54150354 726606181010 Plastic Tube 10 100
10.0mm 400mm 460mm SDS+ 54150355 726606181027 Plastic Tube 10 100
32 33
HAMMER DRILLSH
amm
er D
rills
Hammer Drill BitsDiameter Working Overall Item Shelf Carton
mm Inch Length Length Shank No. UPC No. Packaging Pack Pack
11.0mm 7/16” 100mm 160mm SDS+ 54150358 726606181058 Plastic Tube 10 100
11.0mm 7/16” 240mm 300mm SDS+ 54150359 726606181065 Plastic Tube 10 100
12.0mm 100mm 160mm SDS+ 54150360 726606181072 Plastic Tube 10 100
12.0mm 150mm 210mm SDS+ 54150361 726606181089 Plastic Tube 10 100
12.0mm 240mm 300mm SDS+ 54150362 726606181096 Plastic Tube 10 50
12.0mm 290mm 350mm SDS+ 54150363 726606181102 Plastic Tube 10 50
12.0mm 400mm 460mm SDS+ 54150364 726606181119 Plastic Tube 5 50
13.0mm 1/2” 100mm 160mm SDS+ 54150371 726606181188 Plastic Tube 10 100
13.0mm 1/2” 150mm 210mm SDS+ 54150372 726606181195 Plastic Tube 10 50
13.0mm 1/2” 200mm 260mm SDS+ 54150373 726606181201 Plastic Tube 10 50
13.0mm 1/2” 240mm 300mm SDS+ 54150374 726606181218 Plastic Tube 10 50
13.0mm 1/2” 290mm 350mm SDS+ 54150375 726606181225 Plastic Tube 10 50
14.0mm 9/16” 100mm 160mm SDS+ 54150379 726606181262 Plastic Tube 10 100
14.0mm 9/16” 150mm 210mm SDS+ 54150380 726606181270 Plastic Tube 10 50
14.0mm 9/16” 200mm 260mm SDS+ 54150381 726606181287 Plastic Tube 10 50
14.0mm 9/16” 240mm 300mm SDS+ 54150382 726606181294 Plastic Tube 10 50
14.0mm 9/16” 290mm 350mm SDS+ 54150383 726606181300 Plastic Tube 10 50
14.0mm 9/16” 400mm 460mm SDS+ 54150384 726606181317 Plastic Tube 10 20
14.0mm 9/16” 540mm 600mm SDS+ 54150385 726606181324 Plastic Tube 5 20
14.0mm 9/16” 940mm 1000mm SDS+ 54150386 726606181331 Plastic Tube 1 5
15.0mm 100mm 160mm SDS+ 54150387 726606181348 Plastic Tube 10 100
15.0mm 240mm 300mm SDS+ 54150388 726606181355 Plastic Tube 10 50
16.0mm 5/8” 100mm 160mm SDS+ 54150389 726606181362 Plastic Tube 5 50
16.0mm 5/8” 150mm 210mm SDS+ 54150390 726606181379 Plastic Tube 5 20
16.0mm 5/8” 240mm 300mm SDS+ 54150391 726606181386 Plastic Tube 10 50
16.0mm 5/8” 290mm 350mm SDS+ 54150392 726606181393 Plastic Tube 5 40
16.0mm 5/8” 400mm 460mm SDS+ 54150393 726606181409 Plastic Tube 5 20
16.0mm 5/8” 940mm 1000mm SDS+ 54150394 726606181416 Plastic Tube 1 10
18.0mm 11/16” 150mm 210mm SDS+ 54150400 726606181478 Plastic Tube 5 20
18.0mm 11/16” 200mm 260mm SDS+ 54150401 726606181485 Plastic Tube 5 20
18.0mm 11/16” 240mm 300mm SDS+ 54150402 726606181492 Plastic Tube 1 5
18.0mm 11/16” 290mm 350mm SDS+ 54150403 726606181508 Plastic Tube 5 20
18.0mm 11/16” 350mm 410mm SDS+ 54150404 726606181515 Plastic Tube 5 20
18.0mm 11/16” 400mm 460mm SDS+ 54150405 726606181522 Plastic Tube 5 20
18.0mm 11/16” 540mm 600mm SDS+ 54150406 726606181539 Plastic Tube 5 20
19.0mm 3/4” 140mm 200mm SDS+ 54150409 726606181560 Plastic Tube 5 50
19.0mm 3/4” 240mm 300mm SDS+ 54150410 726606181577 Plastic Tube 5 40
19.0mm 3/4” 400mm 460mm SDS+ 54150411 726606181584 Plastic Tube 5 20
20.0mm 13/16” 150mm 210mm SDS+ 54150412 726606181591 Plastic Tube 5 25
20.0mm 13/16” 200mm 260mm SDS+ 54150413 726606181607 Plastic Tube 5 40
20.0mm 13/16” 250mm 310mm SDS+ 54150414 726606181614 Plastic Tube 5 40
20.0mm 13/16” 290mm 350mm SDS+ 54150415 726606181621 Plastic Tube 5 20
20.0mm 13/16” 350mm 410mm SDS+ 54150416 726606181638 Plastic Tube 5 20
20.0mm 13/16” 400mm 460mm SDS+ 54150417 726606181645 Plastic Tube 5 20
20.0mm 13/16” 540mm 600mm SDS+ 54150418 726606181652 Plastic Tube 2 10
20.0mm 13/16” 740mm 800mm SDS+ 54150419 726606181669 Plastic Tube 2 10
HAMMER DRILLSH
amm
er Drills
Hammer Drill Bits* Additional sizes available upon request
Diameter Working Overall Item Shelf Cartonmm Inch Length Length Shank No. UPC No. Packaging Pack Pack
20.0mm 13/16” 940mm 1000mm SDS+ 54150420 726606181676 Plastic Tube 1 10
22.0mm 7/8” 150mm 210mm SDS+ 54150421 726606181683 Plastic Tube 5 25
22.0mm 7/8” 200mm 260mm SDS+ 54150422 726606181690 Plastic Tube 5 25
22.0mm 7/8” 250mm 310mm SDS+ 54150423 726606181706 Plastic Tube 5 40
22.0mm 7/8” 290mm 350mm SDS+ 54150424 726606181713 Plastic Tube 5 25
22.0mm 7/8” 350mm 410mm SDS+ 54150425 726606181720 Plastic Tube 1 10
22.0mm 7/8” 400mm 460mm SDS+ 54150426 726606181737 Plastic Tube 5 25
22.0mm 7/8” 540mm 600mm SDS+ 54150427 726606181744 Plastic Tube 2 10
22.0mm 7/8” 740mm 800mm SDS+ 54150428 726606181751 Plastic Tube 2 10
22.0mm 7/8” 940mm 1000mm SDS+ 54150429 726606181768 Plastic Tube 1 10
24.0mm 15/16” 150mm 210mm SDS+ 54150430 726606181775 Plastic Tube 5 25
24.0mm 15/16” 200mm 260mm SDS+ 54150431 726606181782 Plastic Tube 1 10
24.0mm 15/16” 250mm 310mm SDS+ 54150432 726606181799 Plastic Tube 1 20
24.0mm 15/16” 290mm 350mm SDS+ 54150433 726606181805 Plastic Tube 1 10
24.0mm 15/16” 350mm 410mm SDS+ 54150434 726606181812 Plastic Tube 1 10
24.0mm 15/16” 400mm 460mm SDS+ 54150435 726606181829 Plastic Tube 1 10
24.0mm 15/16” 540mm 600mm SDS+ 54150436 726606181836 Plastic Tube 1 10
24.0mm 15/16” 740mm 800mm SDS+ 54150437 726606181843 Plastic Tube 1 10
24.0mm 15/16” 940mm 1000mm SDS+ 54150438 726606181850 Plastic Tube 1 10
25.0mm 1” 150mm 210mm SDS+ 54150439 726606181867 Plastic Tube 5 25
25.0mm 1” 200mm 260mm SDS+ 54150440 726606181874 Plastic Tube 1 20
25.0mm 1” 250mm 310mm SDS+ 54150441 726606181881 Plastic Tube 1 20
25.0mm 1” 290mm 350mm SDS+ 54150442 726606181898 Plastic Tube 1 20
25.0mm 1” 350mm 410mm SDS+ 54150443 726606181904 Plastic Tube 1 20
25.0mm 1” 400mm 460mm SDS+ 54150444 726606181911 Plastic Tube 1 10
25.0mm 1” 540mm 600mm SDS+ 54150445 726606181928 Plastic Tube 1 10
25.0mm 1” 740mm 800mm SDS+ 54150446 726606181935 Plastic Tube 1 10
25.0mm 1” 940mm 1000mm SDS+ 54150447 726606181942 Plastic Tube 1 10
Demolition Chisels
• For use in SDS+ & SDS Max tools with percussion• Treated high tensile body for better durability
Diameter Shape Width Length Shank Item No. UPC No. Packaging Pack Pack
14mm Pointed 250mm SDS+ 54150501 726606188195 Hang tag 1 50
14mm Flat 20mm 250mm SDS+ 54150502 726606188196 Hang tag 1 50
17mm Pointed 280mm Hex17 54150503 726606188197 Hang tag 1 25
18mm Pointed 280mm SDS Max 54150504 726606188198 Hang tag 1 25
18mm Flat 25mm 280mm SDS Max 54150505 726606188199 Hang tag 1 25
* Additional sizes available upon request
34 35
JOBBER DRILLS
TiN Coated Jobber Drills - Fractional
Job
ber
Dri
lls
Cat. UPC Shelf CartonDescription No. No. Pack Pack
1/64" 98000 72660698000 10 500
1/32" 98001 72660698001 10 500
3/64" 98002 72660698002 10 500
1/16" 98003 72660698003 10 500
5/64" 98004 72660698004 10 500
3/32" 98005 72660698005 10 500
7/64" 98006 72660698006 10 500
1/8" 98007 72660698007 10 500
9/64" 98008 72660698008 10 500
5/32" 98009 72660698009 10 500
11/64" 98010 72660698010 10 500
3/16" 98011 72660698011 10 500
13/64" 98012 72660698012 10 500
7/32" 98013 72660698013 10 500
15/64" 98014 72660698014 10 500
1/4" 98015 72660698015 10 500
17/64" 98016 72660698016 10 500
9/32" 98017 72660698017 10 500
19/64" 98018 72660698018 10 500
5/16" 98019 72660698019 10 500
21/64" 98020 72660698020 10 500
11/32" 98021 72660698021 10 500
23/64" 98022 72660698022 10 500
3/8" 98023 72660698023 10 500
7/16" 98024 72660698024 5 250
1/2" 98025 72660698025 5 250
17/32" 98026 72660698026 5 250
9/16" 98027 72660698027 5 250
5/8" 98028 72660698028 5 250
11/16" 98029 72660698029 5 250
13pc set 1/16''-1/4'' 98113 72660698113 1 20
21pc set 1/16''-3/8' 98121 72660698121 1 20
29pc set 1/16''-1/2' 98129 72660698129 1 20
• 135° split point begins drilling immediately minimizing bit “walk”• Titanium nitride coating. This gold colored coating lasts up to six times longer than standard high speed steel drill bits• Reduces friction, very wear resistant
• Coating is very hard, approximately 80 Rockwell C • Ideal for production work or repetitive drilling• Packed in reusable plastic tubes for easy storage
* Additional sizes available upon request
JOBBER DRILLS
TiN Coated Jobber Drills - Metric
* Additional sizes available upon request
Job
ber D
rills
Cat. UPC Shelf CartonDescription No. No. Pack Pack
1.0mm 98050 72660698050 10 500
1.5mm 98051 72660698051 10 500
2.0mm 98052 72660698052 10 500
2.5mm 98053 72660698053 10 500
3.0mm 98054 72660698054 10 500
3.5mm 98055 72660698055 10 500
4.0mm 98056 72660698056 10 500
4.5mm 98057 72660698057 10 500
5.0mm 98058 72660698058 10 500
5.5mm 98059 72660698059 10 500
6.0mm 98060 72660698060 10 500
6.5mm 98061 72660698061 10 500
7.0mm 98062 72660698062 10 500
7.5mm 98063 72660698063 10 500
8.0mm 98064 72660698064 10 500
8.5mm 98065 72660698065 10 500
9.0mm 98066 72660698066 10 500
9.5mm 98067 72660698067 10 500
10.0mm 98068 72660698068 10 500
10.5mm 98069 72660698069 10 500
11.0mm 98070 72660698070 5 250
11.5mm 98071 72660698071 5 250
12.0mm 98072 72660698072 5 250
12.5mm 98073 72660698073 5 250
13.0mm 98074 72660698074 5 250
14.0mm 98075 72660698075 5 250
15.0mm 98076 72660698076 5 250
19pc set 1.0mm-10.0mm 98119 72660698119 1 20
25pc set 1.0mm-13.0mm 98125 72660698125 1 20
Cat. UPC Shelf CartonDescription No. No. Pack Pack
14.0mm 98090 72660698090 5 200
15.0mm 98091 72660698091 5 200
18.0mm 98092 72660698092 5 200
20.0mm 98093 72660698093 5 200
22.0mm 98094 72660698094 5 200
24.0mm 98095 72660698095 5 200
TiN Coated Jobber Drills - 16mm Reduced Shank
* Additional sizes available upon request
36
Simonds International
Asia Headquarters
2F, #71, Lane 145 Tun Hua N. Rd.
Taipei, Taiwan 10549
Tel: 886-2-2718-3060
Fax: 886-2-2514-9866
Simonds International
APAC / EMEA Sales
772, Bedok Reservoir Road, #01-15,
Waterfront Key, Singapore 479251
Tel: 65-8322-5595
Fax: 65-6404-3695
Simonds International
World Headquarters
135 Intervale Parkway
Fitchburg, MA 01420 - U.S.A.
Tel: 978-424-0100
Fax: 800-541-6224
135 Intervale ParkwayFitchburg, MA 01420 - U.S.A.
www.simondsinternational.com
CFC17-06100/PP-89109/24M/Printed 06/17/USA Simonds No. T231600 ©2017, Simonds International Corp.Specifications subject to change without notice.