shanghai, 26 – 29 september 2018 - mdna.com · registration fee is payable for each co-exhibitor....

Shanghai, 26 – 29 September 2018China I www.tubechina.net

Supported by

The 8th All China - InternationalTube & Pipe Industry Trade Fair

Application

closing date

4 June 2018

Shanghai, China26 – 29 Sept 2018

The 8th All China – International Tube & Pipe Industry Trade Fair

Messe Düsseldorf GmbHG2-GP9 / Marcus MüllersPostfach 10 10 0640001 DüsseldorfGermany

Registration deadline / Start of hall planning:

4 June 2018

Phone: +49(0)211/4560 - 579Fax: +49(0)211/4560 - 87 579E-mail: [email protected]: www.tubechina.net

For use by Messe Düsseldorf only: 1.0

Kunden-Nummer

Auftragsnummer

Online-Anmeldung ID

Page 1 of 2

1 Legal name and address of the exhibitor* (contract partner/service recipient* of Messe Düsseldorf GmbH)

Our media partner will contact you regarding your catalogue/website presentation in good time.

Company **

Street **

Post Code ** City **

P.O. Box ** Post Code **

Country **

Company phone **

Our parent company is located (country)

Website **

Company E-Mail **

I herewith confirm that the company (= exhibitor) is an entrepreneur and that all future services of Messe Düsseldorf GmbH will exclusively be purchased for our business.in addition only for companies within EU: I herewith confirm that all future services of Messe Düsseldorf GmbH will be purchased under the explicit use of the VAT-ID No. above mentioned.

Our contact person – first name/surname Phone

E-Mail Fax

Our Managing Director – first name/surname

Our order number

VAT ID

** The basic entry in the catalogue and on the Internet includes company name, address, and contact information, as well as the main area of presentation mentioned. You will receive additional catalogue and portal entry options from the respective publisher after notification of admission.

* after notification of admission by Messe Düsseldorf GmbH

!

Company fax **

Legal (corporate) structure

GB

A Application

3.1

3 Application for stand spaceThe following details under 3.1 and 3.2 can only be taken into accountwhere feasible and cannot be regarded as a condition of participation.

Registration fee per co-exhibitor: 780.- EUR

Minimum size: 12 m2

Area in m2 Width in meters Depth in meters

min. max. min. max.

3.2 Stand type and prices Space only Standard stand please tick min 18 m2 construction in addition to stand 305.– EUR/m2 Details for furnishing and design (form D)

Row stand – 1 side open

Corner stand – 2 sides open upon request and subject to availability

End of block – 3 sides open upon request and subject to availability

Island side – 4 sides open upon request and subject to availability

In open air area on request

3.3 We exhibited at the last show

We request a customised stand construction proposal instead of standard construction

In the absence of any statutory ruling to the contrary, all prices are to be understood as subject to German turnover tax at the statutory rate.

2 Product categories (Form B)

Please note that product codes are not automatically listed in the catalogue!

Main area of presentation** (list one only):

Stand No.

Details of main exhibit:

Height in meters Width in meters Length in meters Weight in kg

Type

D1 335.– EUR/m2

D1 335.– EUR/m2

Data protection regulations see www.wirechina.net

D1 335.– EUR/m2

D1 335.– EUR/m2



Please re-enter details

Company

City

Phone: +49(0)211/4560-579

Fax: +49(0)211/4560-87 579

E-mail: [email protected]

Website: www.tubechina.net


4 June 2018Page 2 of 2

Post Code

4 No. of proposed co-exhibitors:

Data protection regulations see www.tubechina.net

7 Invoicing (choose only one)

8 Comments

Company

Street

Country

Post Code City

Invoicing by mail:We prefer receiving the invoice by mail. For VAT regulatory reasons invoices will always be issued to the exhibitor listed under item 1.

to the address of the exhibitor listed under item 1

to the following billing address

By signing this application we accept as binding the Conditions of Participation as issued by Messe Düsseldorf GmbH, Düsseldorf.The place of performance and jurisdiction for all mutual obligations is Düsseldorf or, at the request of Messe Düsseldorf, the jurisdiction of the exhibitor‘s place of business. This also applies to actions under the Bills of Exchange/Cheques Act.

Legally binding signature and company stamp of the exhibitor listed under 1

6 Third party authorised signatory for all legally binding actions for the exhibitor – after being approved as an exhibitor (incl. authority to accept legal documents)Third party authorized signatory cannot however be considered as the exhibitor.

To be completed only if different from company address above.

Company

Name – first name/surname

Street

Post Code City

Country

E-Mail

Phone Fax

Place, Date

Electronic invoicing: (pursuant to clause 3 of the General Terms of Participation)Would you email us the Messe Düsseldorf invoice, with the PDF file attached. For VAT regulatory reasons invoices will always be issued to the exhibitor listed under item 1.The exhibitor guarantees proper invoice processing by the recipient.Please send the electronic invoice to us at the following e-mail address:

via e-mail to

or

The registration of co-exhibiting companies (form E) must also obligatorily be submitted for each co-exhibitor. The exhibitor will receive in due time via email further information about the online invitation/registration. Please note: the registration fee is payable for each co-exhibitor.

GB

A Application

Raw materials, tubes and accessories Tube manufacturing machinery

Rebuilt and Reconditioned Machinery Process technology tools and auxiliaries

Measuring and control technology Testing

Specialist areas Trading, stockists of tubes

Pipeline and OCTG Technology Profiles and machinery

PT – Plastic Tube

5 We exhibit

n Registered/incorporated company yes no5.1

City

No. since

n International target markets:5.2

Africa Asia Europe India Indonesia Iran Russia South America USA None of the above

n Target groups from the following segments:5.3

Please specify your main target group (group number)

Tube industry Iron,steel and non-ferrous metals industry (2) (manufacturers and users) (1)

Non-metal tube industry (3) Automotive industry incl. supply industry (4)

Oil, gas and chemicals industry (5) Electrical industry (6)

Construction industry and trade (7) Technical specialist retailers (8)

Skilled trades (9) Energy and water supply (10)

Associations (11)



GB

B Product categories Tube China 2018Page 1 of 5

£01.06.07 Anodized tubes£01.06.08 Coated tubes£01.06.09 Surface-treated tubes£01.06.10 Formed tubes£01.06.11 Tubes (rolled, insulated, plastic-coated)£01.06.12 Rectified and chromium plated bars and tubes£01.06.13 Bored and grinted mirror finish tubes for hydraulic application£01.06.14 Extruded tubes£01.06.15 Pilger tubes£01.06.16 Hydro-formed tubes£01.06.17 Tailored Tubes

£01.07 Conduits£01.07.01 Drainage£01.07.02 Discharge systems£01.07.03 Line construction (water, oil, gas, vapour)£01.07.04 Solids transportation (coal, cement, lime, other dust)£01.07.05 Nuclear power stations£01.07.06 Heat exchange and transfer£01.07.07 Drilling technology (water, oil, mineral wells)£01.07.08 Measuring technology£01.07.09 Mechanical engineering (hydraulics, pneumatics)£01.07.10 Blow tubes (steel production, oxygen tubes)

£01.08 Construction tubes£01.08.01 Steel construction£01.08.02 Plant construction£01.08.03 General construction (scaffolding, stands, towers)£01.08.04 Masts (tubular masts, lighting, conductors)£01.08.05 Vehicles (bicycles and motorcycles, trailers, cars)£01.08.06 Shipbuilding and aircraft construction£01.08.07 Furniture, musical instruments etc.£01.08.08 Chemicals (including acidproof tubes)£01.08.09 Other (rocket, restrictor, telescopic tubes etc.)

£01.09 Tube accessories£01.09.01 Flanges£01.09.02 Seals (screw, hermetic, snug fit)£01.09.03 Connecting pieces (straight and elbows)£01.09.04 Mountings (brackets)£01.09.05 Fittings£01.09.06 Packing, seals£01.09.07 Vibration damping elements£01.09.08 Pipe Couplings£01.09.09 Tube repair elements£01.09.10 Tube and pipe manipulation£01.09.11 Pipe protection caps£01.09.12 Flange protection caps£01.09.13 Thread protectors

01 Raw materials, tubes and accessories

£01.01 Tubes, ferrous and alloys£01.01.01 Carbon content (low)£01.01.02 Carbon content (high)£01.01.03 Other alloyed steel tubes£01.01.03.01 Duplex and nickel base alloy pipes and tubes£01.01.04 Bimetallic tubes

£01.02 Stainless steel (rustproof)£01.02.01 Austenitic£01.02.02 Ferritic£01.02.03 Martensitic

£ 01.03 Tubes, non-ferrous metal and alloys£01.03.01 Aluminium£01.03.02 Brass/bronze£01.03.03 Copper£01.03.04 Nickel£01.03.05 Zinc£01.03.06 Titanium£01.03.07 Other

£01.04 Tubes, plastic and composite£01.04.01 Acrylonitrile Butadiene Styrene (ABS)£01.04.02 Cross-linked polyethylene (XLPE, PE-X)£01.04.03 Glass Fiber Reinforced Epoxy£01.04.04 Glass Reinforced Polymer (GRP)£01.04.05 Polyethylene (PE) HDPE, MDPE, LDPE£01.04.06 Carbon fibre reinforced£01.04.07 Hybrid tubes£01.04.08 Multi-layer composites£01.04.09 Nylon£01.04.10 PTFE£01.04.11 Polybutylene£01.04.12 Polypropylene (PP)£01.04.13 Polyvinyl chloride (PVC)£01.04.14 Other Tubes based on plastic and composite

£01.05 Tubes, mineral raw materials£01.05.01 Concrete tubes, non-reinforced£01.05.02 Concrete tubes, reinforced£01.05.03 Concrete tubes with protective coating£01.05.04 Stoneware tubes (all types and applications)£01.05.05 Ceramic tubes (measuring technology, hightemperature range)£01.05.06 Fibrated concrete tubes

£01.06 Tubes made from various manufacturing and processing methods (welded, cold and hot drawn, pressed)£01.06.01 Welded steel tubes (also water boiler tubes)£01.06.02 Seamless steel tubes£01.06.03 Sintered tubes£01.06.04 Precision tubes£01.06.05 Threaded tubes (seamless, welded, mediumweight, heavy)£01.06.06 Galvanized and clad tubes (Zn, Cu, Sn etc.)



GB


£02.05 Tube processing equipment£02.05.01 Forming, bending, twisting, fabricating, hydrofor- ming£02.05.02 Straightening£02.05.03 Sawing, separating, laser cutting£02.05.04 Expanding, deburring, peeling, folding£02.05.05 Upsetting, beading, compressing£02.05.06 Drilling, turning, chamfering, pointing£02.05.07 Attaching ribs, grooving, thread cutting£02.05.08 Scoring, slotting£02.05.09 Hardening, annealing, tempering£02.05.10 Spark erosion£02.05.11 Pickling, burnishing, phosphating£02.05.12 Enamelling£02.05.13 Galvanizing, cladding (with zinc, tin, copper, bronze etc.)£02.05.14 Anodizing£02.05.15 Blanking, profiling, stamping, punching, piercing£02.05.16 Grinding, polishing, lapping, honing£02.05.17 Insulating£02.05.18 Coating (with plastic, insulating material etc.)£02.05.19 Marking£02.05.20 Cleaning£02.05.21 Horizontal strip accumulators£02.05.22 Bull-blocks£02.05.23 Laser cutting equipment£02.05.24 Flying Shears, High-Speed£02.05.25 Water jet cutting systems£02.05.26 Surface pre-treaters for adhesion of printing ink, lacquer and glue (for polymer plastics, metal, glass, etc.)£02.05.27 edge milling machines

£02.06 Duct Winding Machines£02.06.01 for flexible ducts£02.06.02 for rigid ducts

03 Rebuilt and Reconditioned Machinery

£03.01 Casting and forging

£03.02 Drawing, extruding, rolling

£03.03 Welding

£03.04 Surface- and heat treatment equipment

£03.05 Tube processing and finishing equipment

£03.06 Materials handling

£03.07 Measuring and control technology

02 Tube manufacturing machinery

£02.01 Casting£02.01.01 Continuous casting£02.01.02 Spin casting£02.01.03 Powder metallurgy installations£02.01.04 Forging

£02.02 Rolling, drawing, extruding£02.02.01 Cold rolling mills£02.02.02 Hot rolling mills£02.02.03 Punches£02.02.04 Plug mills£02.02.05 Stretch rolling mills£02.02.06 Push and drawing benches£02.02.07 Pilger mills£02.02.08 Tube rolling mills£02.02.09 Rotary piercing mills£02.02.10 Diescher mills£02.02.11 Sizing mills£02.02.12 Smoothing and polishing mills£02.02.13 Extruding presses (direct and indirect)£02.02.14 Ultrasonic drawing machines

£02.03 Welding, soldering£02.03.01 Tube forming equipment£02.03.02 Tube welding equipment£02.03.03 High-frequency welding equipment£02.03.04 Induction welding equipment£02.03.05 Resistance welding equipment£02.03.06 Inert gas welding equipment (TIG, ERW, MIG)£02.03.07 Simple welding equipment£02.03.08 Soldering equipment£02.03.09 Fixing devices to centre pipes for welding£02.03.10 Forming gas chamber system for localised flooding with forming gas when welding pipes of stainless steel£02.03.11 Inside and outside scarfing systems for longitudinally welded tubes£02.03.12 Strip shaving equipment for aluminised or galvanised skelp£02.03.13 Coil and welding equipment£02.03.14 Spiral pipe welding machines

£02.04 Heat treatment£02.04.01 Drying and heating furnaces£02.04.02 Pre- and re-heating systems£02.04.03 Tempering furnaces and systems£02.04.04 Annealing furnaces (batches and continuous furnaces)£02.04.05 Melting furnaces£02.04.06 Partial heating systems (including weld seams, edges)£02.04.07 Induction annealing furnaces£02.04.08 Sintering plants£02.04.09 Baking plants (for stoneware tubes etc.)£02.04.10 Thermo-mechanical processing plants£02.04.11 Heat treatment/Process and equipment



GB


£06.02.09 Optical testing£06.02.10 Thermographic test

£06.03 Destructive testing of finished products£06.03.01 Fracture and hardness tests£06.03.02 Notched bar impact test£06.03.03 Tests under tensile, compressive and torsional loads£06.03.04 Creep, fatigue and vibration tests£06.03.05 Corrosion tests£06.03.06 Other tests

07 Specialist areas

£07.01 Plant engineering and construction

£07.02 Logistics£07.02.01 Packaging£07.02.01.01 Machinery and constructions£07.02.01.02 Materials£07.02.01.03 Counting, weighing and sorting£07.02.02 Stock automation£07.02.02.01 Control and monitoring installations£07.02.02.02 Racking systems£07.02.02.03 Storing (automatic, mechanical)£07.02.03 Handling and transporting - automation£07.02.03.01 Auxiliaries (guides, feed devices, brakes etc.)£07.02.03.02 Small lifting devices£07.02.03.03 Conveying systems£07.02.03.04 Coiling and uncoiling (reels etc.)£07.02.03.05 Transportation

£07.03 Safety technology

£07.04 Environmental protection£07.04.01 Recycling

£07.05 Restoration and reparation£07.05.01 Tubes and pipes£07.05.02 Welding seams in the construction of bulk storage tanks£07.05.03 Special machines and fittings£07.05.04 Inside and outside cleaning

£07.06 Sawblade grinding machines

£07.07 HF-Electron Tubes£07.07.01 For capacitive and inductive applications£07.07.02 Rebuilt, for HF Induction Welders

£07.08 Data technology/Production control£07.08.01 Roll design software£07.08.02 Software for bending£07.08.03 Other

£07.09 Consulting and services£07.09.01 Management consulting

04 Process technology tools and auxiliaries

£04.01 Continuous casting

£04.02 Pressing, extruding (dies, extrusion dies, arbors)

£04.03 Drawing (dies)

£04.04 Dies

£04.05 Rolling

£04.06 Welding, soldering (electrodes, solders)

£04.07 Cutting, deburring (saw blades, polishing wheels etc.)£04.07.01 Technical brushes

£04.08 Auxiliary and operating materials£04.08.01 Lubricants£04.08.02 Drawing and rolling aids£04.08.03 Auxiliary chemicals£04.08.04 Gases (fuel and protective gases)

£04.09 Reconditioning

£04.10 Other

£04.11 Minimum lubrication for tube extrusion

05 Measuring and control technology

£05.01 Gauges

£05.02 Measuring systems£05.02.01 Roll inspection machines£05.02.02 Length and Speed Measurement

£05.03 Sensors and controllers (temperature, moisture, flow rate)

£05.04 Automatic control equipment

06 Testing

£06.01 Testing of raw materials

£06.02 Non-destructive testing of finished products£06.02.01 Radiographic testing£06.02.02 Laser beam testing£06.02.03 Eddy current test and magnetic particle examination£06.02.04 Sonic and ultrasonic testing£06.02.05 Leakage testing£06.02.06 Other tests£06.02.07 Endoscopes£06.02.08 Hydrostatic tube testing



GB


£09.05.02 Coating services

£09.06 Pipe laying systems£09.06.01 Alignment and measurement systems

£09.07 Welding equipment ERW, Spiral, Seam, MIG TIG

£09.08 Fittings

£09.09 Construction

£09.10 Planning, design, service

10 Profiles and machinery

£10.01 Profiles£10.01.01 Steel profiles£10.01.02 Stainless steel profiles£10.01.03 Non-ferrous profiles£10.01.04 Alloys Profiles

£10.02 Machinery£10.02.01 Profile Machinery£10.02.02 Profile bending machines£10.02.03 Profile roll forming machines£10.02.04 Profile working machines£10.02.05 Profile cutting machines£10.02.06 Profile end forming machines

11 Plastic Tube

£11.01 Competence area waste disposal £11.01.01 Sewer ducts and pipes£11.01.01.01 Solid-wall pipe systems£11.01.01.02 Multi-layer systems£11.01.01.03 Pipe systems with shaped walls£11.01.01.04 Waste-water pressure pipes£11.01.02 Plastic chambers£11.01.02.01 Accessible£11.01.02.02 Inaccessible£11.01.03 Fastener technology£11.01.03.01 Socket£11.01.03.02 Pipe couplings£11.01.03.03 Flange

£11.02 Competence area utility supply£11.02.01 Drinking water£11.02.01.01 Pipes and pipe systems£11.02.01.02 Fittings£11.02.01.03 Valves£11.02.02 Gas£11.02.02.01 pipes and pipe systems £11.02.02.02 fittings

£07.09.02 Construction of tubes and pipes£07.09.03 Services for tube and pipe pickling,electropolishing, annealing£07.09.04 Services for tube and pipe bending (induction or cold), cutting, fabricating£07.09.05 Coating services

£07.10 Research and training

£07.11 Trade literature, publications

£07.12 Associations

£07.13 Grinding machines£07.13.01 Ball valves grinding machine

08 Trading, stockists of tubes of

£08.01 Ferrous metal£08.01.01 Welded£08.01.02 Seamless

£08.02 Non-ferrous metal and alloys£08.02.01 Welded£08.02.02 Seamless

£08.03 Plastic and composite materials

£08.04 Fiber glass

£08.05 Glass

£08.06 Ceramic

£08.07 Concrete

£08.08 Fibre-cement

£08.09 Other

09 Pipeline and OCTG Technology

£09.01 Pipeline construction£09.01.01 Machinery and equipment£09.01.02 Pipeline materials

£09.02 Maintenance£09.02.01 Equipment condition monitoring, pigging etc.£09.02.02 Leak searching systems

£09.03 Surface coating

£09.04 Corrosion prevention systems

£09.05 Reconditioning of plant and equipment£09.05.01 Analysis software



GB


£11.03 Competence area building technology£11.03.01 Radiator connections with plastic pipe systems £11.03.02 Underfloor heating£11.03.03 Wall heating£11.03.04 Air conditioning of buildings£11.03.05 Sprinkler systems

£11.04 Competence area industrial tubes and pipes £11.04.01 Chemical and petrochemical industry£11.04.02 Disinfection and cleaning£11.04.03 Waste gas treatment£11.04.04 Energy production£11.04.05 Clean room£11.04.06 Paper production£11.04.07 Food and drinks industry£11.04.08 Mining industry£11.04.09 Swimming pool technology£11.04.10 Textile industry£11.04.11 Automotive industry£11.04.12 Electrical industry£11.04.13 Agriculture

£11.05 raw material



CGB

Conditions of Participation

1 Title of event

2 Organizer

3 Venue

4 Dates

5 Deadline for Registration

6 Catalogue Entry

7 Participation fees

8 Application

9 Admission

10 Terms of Payment

11 Withdrawal or Non-Participation

12 Operation of exhibition stands

13 Co-Exhibitors and group stands

14 Exhibits

15 Technical Guidelines

16 Fair Insurance and Exclusion of Liability

17 Circulars

18 Reservations

19 Final Provisions

20 Salvatorian clause

Tube China 2018The 8th All China – International Tube & Pipe Industry Trade FairShanghai, China26 – 29 Sept 2018

1 Title of eventTube CHINA 2018 The 8th All China - International Tube & Pipe Industry Trade Fair

2 OrganizerMesse Düsseldorf GmbHPostfach 10 10 06, 40001 DüsseldorfMesseplatz, 40474 DüsseldorfGermanyPhone: +49(0)211/45 60-01 Fax: +49(0)211/45 60-668www.messe-duesseldorf.de in co-operation withMesse Düsseldorf (Shanghai) Co., Ltd.Units 307 - 308, Tower 1, German Centrefor Industry and Trade Shanghai88 Keyuan Road, Zhangjiang Hi-Tech Park,Pudong, Shanghai 201203CHINAPhone: +86-21-616983-00Fax: +86-21-616983-01

3 VenueShanghai New International Expo Centre

4 Dates Construction: for international exhibitors: 23 (afternoon) – 25 September, 2018 for domestic exhibitors: 24 – 25 September, 2018 Duration: 26 – 29 September, 2018 Dismantling: 29 September, 2018 4.00 p.m. – 12.00 p.m.

The exhibition will be opened on Monday, September 26, 2018.Opening times: 26 – 28 September 2018 9:00 a.m. – 4.30 p.m. 29 September 2018 9:00 a.m. – 4.00 p.m.

5 Deadline for Registration4 June 2018

6 Catalogue Entry6.1 Catalogue EntryThe exhibitor is forwarded separate forms in due course for catalogue entries in addition to the 6.1 entry. These provisions (6.1 and 6.2) also apply to co-exhibitors.

6.1.1 The catalogue is issued by Messe Düsseldorf. Exhibitors will receive in due time either from Messe Düsseldorf or an appointed third party full details on catalogue entries and placing of advertisements. No claims can be entertained for incorrect, incomplete or omitted entries.

7 Participation feesThe costs of participation to be paid are as set forth in the participation options described under 7.1–7.5 below.

7.1 Stand space inside exhibition hall7.1.1 Package price: 335.– EUR/sqm

(Minimum Stand space: 12 sqm, with surface price)Deluxe equipment for shell scheme model Stand construction and dismantling, incl. all ancillary costs, comprising:• Covering the entire floor area of the booth with grey neddle

punch carpet• Stand partition walls to the neighbouring boothes,

250 cm high, Octanorm system, white• 1 fascia at the aisle, held by aluminium modular system

from top edge of booth, 33 cm high, white, with inscription (20 letters latin + in black without Logo)

EquipmentArea items in sqm 12–14 15–17 18–20 21–23 24–26 27–29 30–32Chairs 3 4 5 6 7 8 9Lockable cupboards 1 1 1 1 2 2 2

Square tables 1 1 1 1 2 2 2Wastepaper basket 1 1 1 1 2 2 2Spots 4 5 6 7 8 9 1013 Amp/220 V Power Point (5A fuse)1 1 1 1 2 2 2

7.1.2 Price for space only 305.– EUR/sqm Minimum stand space 18 sqm 7.2 The Registration fee per co-exhibitor is 780.– EUR

7.3 Stand construction approval/procedure

The fees for the stand construction approval/procedure by the fairground owners/organisers can be found in the technical guidelines (see also point 14)

7.4 General services and facilities

– Provision of net fair space (stand area) during the official opening hours

– Pro rata charge for collectively used area (difference between gross and net area)

– Stand number

– Cleaning of aisles and passages in halls (exhibitors are responsible for cleaning stands)

– General security (no individual surveillance)

– Fire protection service during assembly, event and dismantling

– Carpet in the aisles

– General illumination

– Design of open-air space and halls (flags, inscriptions)

– Equipping and operating a MD service centre (telephone and telefax exchange, technical facilities office and organiser‘s office)

– Comprehensive visitor canvassing

– Mandatory liability insurance by local organisers

Any waiver of individual company-specific or general services shall constitute no claim to reduction of the participation fee.

All fees are net, without value added tax, which may have to be paid separately. Any additional technical services required, e.g. power, security elements, water, local labour etc., are provided exclusively by Messe Düsseldorf at an extra charge and can be ordered using special order forms.

Fees for additional stand assembly services supplementary to those included in the participation fee, and any orders for services shall be agreed on or charged according to Messe Düsseldorf ‘s price lists valid at the time of the event.

Exhibitors shall pay additional rental fees for use of such areas outside official opening hours.

The fees published by Messe Düsseldorf are fixed prices and are binding on both parties once the exhibitor has been admitted. In the event of any change in the initial conditions agreed between local contractual partners and Messe Düsseldorf or any amendment to legal provisions and fees after admission, Messe Düsseldorf shall be entitled to charge these to the exhibitor at the current rate.

7.5 Taxation

The participation fees, in accordance with article 7 of the contract, are to be understood as net prices, plus any value added tax and/ or usage, or rather, service provision tax required by law. If such taxes are triggered by the services, then they are due in addition to the agreed price.

The customer will effect all payments due hereunder without withholding of, deduction for or on account of any present or future taxes, duties, assessments or governmental charges of whatever nature imposed or levied by any governmental authority in connection with this Agreement. If the customer becomes obligated by law to make such withholding or deduction at source, the customer will pay to the Messe Düsseldorf GmbH such additional amounts as may be necessary to enable the Messe Düsseldorf GmbH to receive on the due date a net amount equal to the full amount which it would have received the payment had not been subject to the Taxes. The customer shall promptly pay all of the Taxes, deductions and withholdings and shall not later than eight Business Days after receiving the same, furnish the Messe Düsseldorf GmbH with such certificates, receipts or other documents confirming receipt by the competent authority of such payments. 7.5.1 invoice revision

We charge a fee of EUR 50.– for each invoice revision requested by you.

8 ApplicationApplications must be submitted using the enclosed form, ack now ledg ing these Conditions of Participation. The completed application form bearing a legally binding signature should be mailed to:Messe Düsseldorf GmbH G2 – GP9 P.O. Box 10 10 06 40001 Düsseldorf GermanyNo account shall be taken of conditions or provisos contained in applications. Requests for specific sites do not constitute a condition of participation.The application shall be binding irrespective of admission by Messe Düsseldorf. Only upon receipt by Messe Düsseldorf shall the application be deemed to have been submitted; it shall be binding pending final admission or non-admission. Particulars given shall be stored for automatic data processing and shall be made available to third parties upon implementation of the contract. Applications shall be processed in the order received. Any applications received after the registration deadline can only be considered if sufficient space is available. Any services offered by companies having exclusive rights in the fair grounds must be ordered through Messe Düsseldorf.

9 AdmissionIn principle, only those exhibitors are admitted whose product range is covered by the title and remit of the event. There is no legal right to admission.Messe Düsseldorf decides on the admission of exhibitors and exhibits. Any firm which has failed to meet its financial obligations as against Messe Düsseldorf (from previous fair participations and/or under the terms of these Conditions of Participation, Item 10) may be rejected.Exhibitors will be informed of admission in writing and admission shall apply only to the exhibitor stated therein. Exhibitors will receive written confirmation surface mail or electronically that they have been admitted with their products.Notification of admission, whether by surface mail or electronically, constitutes the conclusion of the contract between Messe Düsseldorf GmbH and the exhibitor. The electronic transmission has been made, as soon as the confirmation of admission has become accessible to the exhibitor. The exhibitor must ensure that its inbox is checked at regular intervals and that the technical requirements for the receipt of e-mails are available. If the exhibitor’s relevant e-mail address changes, then Messe Düsseldorf must be notified immediately. If Messe Düsseldorf suffers loss or damage due to faulty or missing technical requirements and/or due to the exhibitor’s failure to notify Messe Düsseldorf of a new email address, then the exhibitor shall be liable to Messe Düsseldorf for compensation.The exhibitor will be given a floor plan showing the position of its stand. If appropriate, a site map of the exhibition centre or a hall plan will be sent via e-mail additionally.Messe Düsseldorf reserves the right to cancel a stand booking approved on the basis of misleading or false information or if the requirements for participation are no longer met or the booking is no longer in accordance with the admission regulations.Should Messe Düsseldorf be compelled to relocate or change individual stands, entrances, exits or aisles at a later point in time, this shall not give rise to any claims. If through no fault on the part of Messe Düsseldorf the space allocated is no longer available, the exhibitor shall be entitled to a refund of the participation fee. No claims for damages may be submitted.Following admission by Messe Düsseldorf (conclusion of the contract), the obligation to pay the participation fee shall remain legally binding even if, for example, the authorities in the exhibiting country do not approve, in whole or in part, the exhibitor’s import requirements, or if exhibits fail to arrive in time or to arrive at all (e.g. owing to loss, delays in transit or customs), or if the exhibitor or his agent is delayed or even unable to attend.Should the exhibitor or his agent fail to take over the allocated stand area two days prior to the beginning of the event, such area may be otherwise disposed of. This shall not release the exhibitor from his contractual obligations or entitle him to a demand refund or lodge any other claims.

10 Terms of Payment

10.1 Participation costs set forth in Item 7 shall become due upon approval of the admission. The exhibitor shall be billed for this account.

10.2 Bills for other, separately ordered services or deliveries shall be payable at the time of performance or on the date of the bill at the latest.

10.3 From 1 January 2006, a European Payments Council resolution requires all European banks to process all cross-border euro payments, received within the European Union and the European Economic Area (EEA), with mandatory BIC (Bank Identifier Code - colloquially known as the SWIFT code) and IBAN (International Bank Account Number) information. Remittances quoting the name of the event, customer’s and bill numbers, are payable into any of the following accounts of Messe Düsseldorf, Düsseldorf:

Deutsche Bank AG Düsseldorf BLZ: 300 700 10 Konto-No: 1641 414 00 Swift-Code: DEUTDEDD IBAN: DE66 30070010 0164141400 BIC-Code: DEUTDEDDXXXCommerzbank AG Düsseldorf BLZ: 300 800 00 Konto-No: 211 279 600 Swift-Code: DRESDEFF300 IBAN: DE05 30080000 0211279600 BIC-Code: DRESDEFF300Stadt-Sparkasse Düsseldorf BLZ: 300 501 10 Konto-No: 10 117 950 Swift-Code: DUSSDEDD IBAN: DE94 30050110 0010117950 BIC-Code: DUSSDEDDXXX

10.4 For all outstanding liabilities Messe Düsseldorf may retain the stand equipment and products of the relevant exhibitor as security.Sec. 562a, sent. 2 of Germany’s Civil Code (BGB) shall not apply. Messe Düsseldorf shall not be liable for damage to and/or loss of goods to which a lien attaches.

10.5 If invoices are sent to a third party on the exhibitor’s instructions, the latter shall still remain debtor.10.6 In case of default, interest shall be charged at a rate 8% above the current base rate according to Sec. 247 of Germany’s Civil Code (BGB). Where payment dates are not met, Messe Düsseldorf shall be entitled to rescind the contract or otherwise dispose of the stand area. Item 11 of the Conditions of Participation shall apply.

11 Withdrawal or Non-ParticipationThe exhibitor is entitled to withdraw his application prior to admission. Should an exhibitor withdraw his application after the date of deadline for registration but prior to admission, he shall forfeit any advance payment made.Following admission, the exhibitor is no longer entitled to withdraw his application or reduce the exhibition space. Both the participation fee and any other costs actually incurred must be paid. Where the exhibitor fails to occupy the stand area allocated to him and where such area can be otherwise rented by Messe Düsseldorf (except by way of ex change), the exhibitor shall pay 40% of the participation fee as well as any other costs actually incurred. The exhibitor reserves the right to furnish evidence that the costs demanded of him are excessive.Withdrawal by the exhibitor or any waiver of the allocated stand area shall only become effective upon receipt by Messe Düsseldorf of a written declaration to that effect.Messe Düsseldorf is entitled to rescind the contract in the event of an application for insolvency proceedings in respect of the exhibitor’s assets or where such an application is rejected on the grounds of insufficient assets. The exhibitor shall inform Messe Düsseldorf thereof at once.

12 Operation of exhibition standsDuring the exhibition opening hours the stand must be manned by a sufficient number of staff and should be accessible to visitors. Exhibitors have no right of access to other stands outside the official opening hours, unless permission has been obtained from the stand exhibitors. Exhibition stands must be operated in accordance with the legal conditions and administrative guidelines.

13 Co-exhibitors and group standsWithout the prior consent of Messe Düsseldorf, exhibitors are not permitted to give their allotted stand either fully or in part to a third party, whether for payment or free of charge. Products or companies other than those specified on the admission slip cannot be advertised on the stand.Permission to accept co-exhibitors will be given only upon application in writing by the exhibitor to Messe Düsseldorf. The co-exhibitor is liable to the same conditions as the main exhibitor. The co-exhibitor is required to pay the registration fee to Messe Düsseldorf. The main exhibitor will, however, always be liable for the payment of the co-exhibitor’s fee/Registration fee. If a co-exhibitor is admitted without the consent of Messe Düsseldorf, Messe Düsseldorf will have the right to cancel the contract with the main exhibitor without further notice and to clear the stand at the exhibitor’s cost. The exhibitor waives the rights of unwarranted interference. The exhibitor will have no right to claim damages.Co-exhibitors are all exhibitors who are represented on a stand with their own staff and own exhibits alongside the main exhibitor. Companies with close economic or organisational ties are also classified as co-exhibitors. Company representatives will not be admitted as co-exhibitors. Additionally represented companies are classified as those whose exhibits are shown by the exhibitor.Manufacturers of such equipment, machinery or other products which are necessary for the demonstration of an exhibitor’s products are not regarded as co-exhibitors or as additionally represented companies. In accordance with the admissions regulations co-exhibitors can be entered into the catalogue with their full address provided all fees have been paid and the necessary documents have been received by the specified deadline. Messe Düsseldorf can authorise group stands provided they are in keeping with the overall pattern of the event. Exhibitors on group stands are subject to all regulations. If a stand is allocated to two or more companies, each company will be jointly and severally liable to Messe Düsseldorf. Companies on a joint stand should nominate a common representative on the application form.

14 ExhibitsAll exhibits must be listed individually on the application form giving an exact description. Any display of inflammable or pungent exhibits or exhibits whose demonstration entails noise requires the prior written consent of Messe Düsseldorf.Exhibits may not be removed during the course of the event. The operation and demonstration of exhibits is only admissible within the scope of legal requirements and accepted standards. Messe Düsseldorf is neither in charge of nor responsible for questions of legal requirements and licenses, quotas or transfers of sales proceeds.

15 Technical GuidelinesThe Technical Guidelines are a constituent part of these Conditions of Participation and must be adhered to. The Technical Guidelines shall be handed over to the exhibitor at the latest with the order form for services.

16 Fair Insurance and Exclusion of LiabilityMesse Düsseldorf has concluded a general exhibiton insurance contract covering the usual insurable risks such as fire, burglary, theft, breakage, leakage and water damage, including the risks of transportation to and from the fairgrounds. On application each exhibitor can have his participation risk covered at his own expense under this general insurance contract. On request a corresponding form will be sent to the exhibitor under separate cover together with the service package offer. Exhibitors who do not avail themselves of the insurance cover offered by this general insurance contract or do not do so in time acknowledge in respect of the exhibiton company that they waive all right to asserting any claims for damages which would have been covered, had they taken out the insurance protection offered. All damages incurred must be reported in writing to the police and to the insurance broker (also by telex or telefax). Incidences of fire, theft and burglary must be reported to the trade fair management and the police within 24 hours. Messe Düsseldorf is liable for financial losses and damage to property or assets only in the case of wilful intent or gross negligence. Messe Düssedorf accepts no duty to excercise proper care with respect to exhibits and/or stand fittings. This exclusion is in no way limited by the security measures provided or decoration services undertaken in individual cases.

The exhibitor is liable for all damages caused to third parties as a result of his exhibiton participation, including damage to buildings on the fairgrounds and to the exhibition halls and/or their furniture and fittings, save where such damages are covered by a local third-party indemnity insurance.

17 CircularsOnce the stand areas have been allocated, the exhibitors receive circulars giving information on preparations for and the staging of the fair. Any consequences arising from disregarding these circulars shall be borne by the exhibitor.

18 ReservationsAny rules and regulations of the host country or of the local contractual partner differing from these Conditions of Participation or imposing additional restrictions shall have precedence at all times. Messe Düsseldorf shall not be liable for any resulting losses or other disadvantages for the exhibitor.Messe Düsseldorf shall be entitled to postpone, curtail, extend or cancel the event and to close individual or all sections of the fair either temporarily or permanently where unforeseen circumstances so dictate. Should it become necessary to postpone, curtail, extend or cancel the event, the exhibitor shall not be entitled to withdraw from the contract or to claim compensation; should he nevertheless waive his right to the stand area allocated to him, Item 11 of these Conditions of Participation shall apply. Messe Düsseldorf shall not be liable for any losses sustained or disadvantages suffered by the exhibitor as a result of a cancellation. Rather, the exhibitor shall in such case be required to bear a reasonable share of the costs incurred by Messe Düsseldorf in preparing for the event.Where the exhibitor has placed orders with Messe Düsseldorf for services supplementary to those covered by the participation fee (Item 7), he shall be billed for the contributions incurred until this point in time.

19 Final ProvisionsAll agreements, individual approvals and special regulations require written confirmation by the trade fair company. Whereever admission documents contain the reference that they haven been drawn up by Messe Düsseldorf GmbH by computer, even if they contain no signature, they are legally binding. If the exhibitor is already registered with Messe Düsseldorf for the relevant event and if he/she has his/her own signature, orders/offers are also valid if they are received by Messe Düsseldorf electronically using this procedure.All claims by exhibitors against Messe Düsseldorf – with the exception of liability with intent – must be made within 6 months. Claims made thereafter are invalid. The period of limitation starts at the end of the month in which the event finished.The place of performance and jurisdiction for all mutual obligations is Düsseldorf or, at the request of Messe Düsseldorf, the jurisdiction of the exhibitor’s place of business. This also applies to complaints arising from cheques or drafts. If the exhibitor loses the case, he/ she bears the costs of the legal proceedings as well as the costs of any legal representation.If the ineffectiveness of any provision is due to the extent of service or period (deadline or date), stated therein, it shall be replaced by the legally permitted scope which comes closest to the provision.

20 Salvatorian clauseIn the event of any provision of this contract being or becoming wholly or partially ineffective, or should a loophole transpire in this contract, such circumstances shall not affect the validity of the remaining contract. Instead of the ineffective provision and in order to close the loopholes, an appropriate provision shall apply, which in as far as legally possible, most closely approximates the objective which was, or would have been intended by the parties to the contract according to the sense and purpose of the contract, based on their consideration of the provision.If the ineffectiveness of any provision is due to the extent of service or period (deadline or date), stated therein, it shall be replaced by the legally permitted scope which comes closest to the provision. The law of the Federal Republic of Germany is applicable.The German text is binding. Messe Düsseldorf GmbH October 2017




Kundennummer

nachgescannt

Online-Anmeldung ID

Messe Düsseldorf GmbHU1 – IFMPostfach 10 10 0640001 DüsseldorfGermany

Phone: +49(0)211/4560 – 77 08Fax: +49(0)211/4560 – 87 77 08E-mail: [email protected]: www.tubechina.net


4 June 2018

GB

D Standard Stand Construction

Page 1 of 2

1 Legal name and address of the exhibitor* (contract partner/service recipient* of Messe Düsseldorf GmbH)

Company

Contact person – first name/surname

Phone



The samples pictured here are available in either row or corner stand options.

Services included in the package price

Stand assembly and dismantling including all ancillary expenses

Covering the entire floor area of the booth with carpet

Stand partition walls to the neighbouring booths

One fascia with company name (2000 x 350 mm)

Any waiver of individual company-specific or general services shall constitute no claim to reduction of the participation fee.

Equipment for stalls of Area items in sqm 12 – 14 15 – 17 18 – 20 21 – 23 24 – 26 27 – 29 30 – 32Chairs 3 4 5 6 7 8 9Lockable sideboard 1 1 1 1 2 2 2Square tables 1 1 1 1 2 2 2Wastepaper basket 1 1 1 1 2 2 2Spots 4 5 6 7 8 9 10Power Point* 1 1 1 1 2 2 2* 13 Amp/220 V (5 A fuse)

D1335.– EUR/m2

incl. stand area

2000 x 350 mm


4 June 2018

Please re-enter details of co-exhibitor

Company

Post Code City



GB

D Standard Stand Construction

Page 2 of 2

Legally binding signature and company stamp of the exhibitor listed under 1


Place, Date

Text for fascia board:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Phone: +49(0)211/4560-77 08Fax: +49(0)211/4560-87 77 08E-mail: [email protected]: www.tubechina.net

Kunden-Nummer

Auftragsnummer

Online-Anmeldung ID

ZUAU (KDNr/Auftr.Nr)



4 June 2018Shanghai, China26 – 29 Sept 2018



GB

E Application as co-exhibitor

Page 1 of 2

4 We aware that we are responsible for the following fees.

n Registration fee per co-exhibitor: 780.- EUR


2 Company and address of the main exhibitor: The main exhibitor takes care of passing on this registration to Messe Düsseldorf GmbH

Company

Street

Country

Post Code City

Place, Date

Legally binding signature and company stamp of the main exhibitor




1 Legal name and address of the co-exhibitor* (contract partner/service recipient* of Messe Düsseldorf GmbH)

Our media partner will contact you regarding your catalogue/website presentation in good time

Company **

Street **



Country **

Company phone **


Website **

Company E-Mail **

I herewith confirm that the company (= co-exhibitor) is an entrepreneur and that all future services of Messe Düsseldorf GmbH will exclusively be purchased for our business.in addition only for companies within EU: I herewith confirm that all future services of Messe Düsseldorf GmbH will be purchased under the explicit use of the VAT-ID No. above mentioned.


E-Mail Fax


Our order number

VAT ID



!

Company fax **



The main exhibitor takes care of passing on the registration to Messe Düsseldorfwww.tubechina.net


4 June 2018


Company

Post Code City



GB

E Application as co-exhibitor

Page 2 of 2

5 We exhibited at the last show(Please provide stand number if known)

Stand number:



Place, Date Legally binding signature and company stamp of the co-exhibitor listed under 1

7 Invoicing (choose only one)

8 Comments

Company

Street

Country

Post Code City

Invoicing by mail:We prefer receiving the invoice by mail. For VAT regulatory reasons invoices will always be issued to the exhibitor listed under item 1.




via e-mail to

or

The main exhibitor takes care of passing on the registration to Messe Düsseldorfwww.tubechina.net






PT – Plastic Tube

6 We exhibit


City

No. since










Associations (11)

Kunden-Nummer

Auftragsnummer

Online-Anmeldung ID







GB

F Application form for participants on group stands

AAb

F =

AAb

Page 1 of 2


5 Registration fee per co-exhibitor

will be invoiced to the official sponsor/organiser 780.- EUR


2 Group stand organiser:

Company

Post Code City

Stand No.in Hall No.

Stand number:






1 Legal name and address of the group stand participant* (contract partner/service recipient* of Messe Düsseldorf GmbH)


Company **

Street **



Country **

Company phone **


Website **

Company E-Mail **

I herewith confirm that the company (= participant) is an entrepreneur and that all future services of Messe Düsseldorf GmbH will exclusively be purchased for our business.in addition only for companies within EU: I herewith confirm that all future services of Messe Düsseldorf GmbH will be purchased under the explicit use of the VAT-ID No. above mentioned.


E-Mail Fax


Our order number

VAT ID



!

Company fax **



Official sponsor/organiser takes care of passing on the registration to Messe Düsseldorfwww.tubechina.net


4 June 2018


Company

Post Code City



GB


AAb

F =

AAb

Page 2 of 2

Place, Date Legally binding signature and company stamp of the participant listed under 1

7 Invoicing if applicable

8 Comments

Company

Street

Country

Post Code City

Invoicing by mail:We prefer receiving the invoice by mail. For VAT regulatory reasons invoices will always be issued to the exhibitor listed under item 1




via e-mail to

or









PT – Plastic Tube

6 We exhibit


City

No. since










Associations (11)

Kunden-Nummer

Auftragsnummer

Online-Anmeldung ID







GB


AO-AAa

F =

AO/A

Aa

Page 1 of 2

1 Legal name and address of the group stand participant* (contract partner/service recipient* of Messe Düsseldorf GmbH)


Company **

Street **



Country **

Company phone **


Website **

Company E-Mail **

I herewith confirm that the company (= participant) is an entrepreneur and that all future services of Messe Düsseldorf GmbH will exclusively be purchased for our business.in addition only for companies within EU: I herewith confirm that all future services of Messe Düsseldorf GmbH will be purchased under the explicit use of the VAT-ID No. above mentioned.


E-Mail Fax


Our order number

VAT ID



!

Company fax **



5 Registration fee per co-exhibitor

will be invoiced to the official sponsor/organiser 780.- EUR


2 Group stand organiser:

Company

Post Code City

Stand No.in Hall No.


Stand number:








4 June 2018


Company

Post Code City



GB


AO-AAa

F =

AO/A

Aa


7 Comments

Page 2 of 2

Place, Date Legally binding signature and company stamp of the participant listed under 1

Post Code









PT – Plastic Tube

6 We exhibit


City

No. since










Associations (11)

shanghai, 26 – 29 september 2018 - mdna.com · registration fee is payable for each co-exhibitor....

Documents