munciepower.com sh series - muncie power productssh series p o w e r t a k e - o f f created to fill...
TRANSCRIPT
KEY FEATURES• Integral air shift design: No exposed air cylinder
• High torque capacity: Meets demanding applications
• 14 input gear sets: Fits most popular transmissions
• 6- or 8-bolt cast iron housing: Easy to mount, high strength
• 5 speed ratios: Versatility
•11 output shaft options: Fits most popular pump types
SH SERIESP O W E R T A K E - O F F
Created to fill the gap between the TG and 82
Series, the SH Series is an air shift only power
take-off designed for high torque applications.
The SH Series is an easy to mount PTO with an
integral air shift design and high torque capacity.
DESIGNED FOR HIGH TORQUE APPLICATIONS
PTO TORQUE & HORSEPOWER RATINGS
SPEEDRATIO
INTERMITTENTHP @ 1,000 RPM
INTERMITTENTTORQUE LBS.FT.
CONTINUOUSTORQUE LBS.FT.
INTERMITTENT[KW] @ 1,000 RPM
INTERMITTENTTORQUE [NM]
CONTINUOUSTORQUE [NM]
05 76 400 280 [57] [542] [379]
07 76 400 280 [57] [542] [379]
09 71 375 263 [53] [508] [356]
12 62 325 228 [46] [441] [309]
13 62 325 228 [46] [441] [309]
Approximate Weight: 35 lbs. (15.9 Kg.)
SH6 DIMENSIONS
OUTPUT OPTIONS
SH8 DIMENSIONS
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” ⅝" SHAFTWITH 5⁄32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” ⅞"-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7" OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” ⅞ -13T SPLINED SHAFT “I” OUTPUT - DIN 5462
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” ⅝" SHAFTWITH 5⁄32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” ⅞"-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7" OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” ⅞ -13T SPLINED SHAFT “I” OUTPUT - DIN 5462
3.3685.3
3.1379.4
3.1379.4
1.2531.8
4.22107.3
8.54217.0
7.30185.5
4.33110.0
4.04102.7
4.57116.0
2.2657.5
6.92175.8
CL MOUNTING FLANGE
1.1729.7
3.3384.6
1.3634.7
3.3685.3
1.2531.8
3.0878.2
3.98101.2
2.5765.4
4.57116.0
6.92175.8
6.25158.8
7.58192.5
SAE 8-BOLT MOUNTING PAD
CL MOUNTING FLANGE
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
REV
CS8
S-XX
XXX-
X1BX
D00
3.3685.3
3.1379.4
3.1379.4
1.2531.8
4.22107.3
8.54217.0
7.30185.5
4.33110.0
4.04102.7
4.57116.0
2.2657.5
6.92175.8
CL MOUNTING FLANGE
OUTPUT OPTIONS (CONT)
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½ -13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
⅞" ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
⅜ -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” ⅞"-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
⅜ -16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3⁄16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” ⅞"-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” ⅝"-9TSPLINED SHAFT
5.750 146.1
½ -13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE “B” ⅞"-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
⅞" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE "A" 2/6-BOLT FLANGESAE “B” 7/8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” ⅞"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ⅝"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½ -13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
⅞" ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
⅜ -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” ⅞"-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
⅜ -16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3⁄16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” ⅞"-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” ⅝"-9TSPLINED SHAFT
5.750 146.1
½ -13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE “B” ⅞"-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
⅞" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE "A" 2/6-BOLT FLANGESAE “B” 7/8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” ⅞"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ⅝"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½ -13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
⅞" ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
⅜ -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” ⅞"-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
⅜ -16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3⁄16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” ⅞"-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” ⅝"-9TSPLINED SHAFT
5.750 146.1
½ -13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE “B” ⅞"-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
⅞" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE "A" 2/6-BOLT FLANGESAE “B” 7/8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” ⅞"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ⅝"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½ -13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
⅞" ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
⅜ -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” ⅞"-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
⅜ -16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3⁄16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” ⅞"-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” ⅝"-9TSPLINED SHAFT
5.750 146.1
½ -13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE “B” ⅞"-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
⅞" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE "A" 2/6-BOLT FLANGESAE “B” 7/8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” ⅞"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ⅝"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
4.188 106.4
⅜ -16 UNC-2B2 PLCS1.2 29
0.3 7
3.25 83
SAE “A” ¾"-11T SPLINED SHAFT
3.536 89.8
3.536 89.8
½ -13 UNC-2B4 PLCS2.0 51
2.8 71
0.5 13
SAE “C” 1¼"-14TSPLINED SHAFT
2.6 65
1½" - 10TSTRAIGHT SPLINE SHAFT
5.770 146.6
3.540 89.9
3.540 89.9
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.8 71
4.0 102
0.9 22
SAE “C” 1¼"-14TSPLINED SHAFT
“T” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ¾"-11T SPLINED SHAFT
“V” OUTPUT - FOR MUNCIE EXTENDED SHAFT
“X” OUTPUT - 1½"-10T SHAFTFOR COMP FLANGE
“Z” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “C” 1¼"-14T SHAFT
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” ⅝" SHAFTWITH 5⁄32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” ⅞"-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7" OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” ⅞ -13T SPLINED SHAFT “I” OUTPUT - DIN 5462“E” OUTPUT - SAE “C” 2/4-BOLT
¼
½
⅝
18143
127
“E” OUTPUT - SAE “C” 2/4-BOLT
¼
½
⅝
18143
127
Muncie Power Products, Inc., Member of Interpump Group201 East Jackson Street, Muncie, Indiana, USA 473051-800-367-7867
MODEL NUMBER CONSTRUCTION
Special Features X — None P — Pressure Lube R — Pulse Gen./No Pressure Lube S — Pulse Gen./Pressure Lube
SH-8S-U68-12 A-1 -B-X
MountingSAE 6-Bolt Std. Mount — 6SSAE 6-Bolt Std. - Metric — 6BSAE 6-Bolt Deep - Metric — 6CSAE 6-Bolt Deep Mount — 6DSAE 6-Bolt Non-Std Mtg w/Dowel Pins - Met Studs (F84) — 6FSAE 6-Bolt Deep - Less Stud Kit — 6KSAE 6-Bolt Std. - Less Stud Kit — 6LSAE 6-Bolt Non-Std. Mtg. (Jatco) — 6NSAE 8-Bolt Std. Mount — 8SSAE 8-Bolt Std. - Metric — 8BSAE 8-Bolt Deep - Metric — 8CSAE 8-Bolt Deep Mount — 8DSAE 8-Bolt Special - E80 — 8FSAE 8-Bolt Deep - Less Stud Kit — 8KSAE 8-Bolt Std. - Less Stud Kit — 8L
PTO Type
SH Series — SH
Transmission SH Gear DataEaton/Paccar 8.05P 20°PA 28.9RH — E80Fuller 10.1P 20°PA Spur — F10Fuller 10.1P 21.5°PA Spur — F11Fuller 6.1P 20.5° PA 29°LH — F61Fuller 6.35P 20° PA 22° LH — F63Fuller 6.65P 20° PA 21.5° LH — F66Fuller 7.0P 23°PA 26° LH — F70Mack 6.48P 17.5°PA Spur — M65Spicer 6P 17.5°PA 26.17° LH — S60Spicer 7P 17.5°PA 26.07° LH — S70Spicer 7P 17.5° PA 18°LH — S71Spicer 7P 22.5° PA 19°LH — S73Universal 6P or 6/8P 20°PA Spur — S68Universal 6P 20°PA Spur — U60Universal 6P or 6/8P 20°PA Spur — U68
Speed Ratio 05 — .47:1 12 — 1.15:1 07 — .70:1 13 — 1.33:1 09 — .87:1 (8-Bolt Only)
Shifter Type A — Manual Air E — Electric/Air (12 Volt) F — Electric/Air (24 Volt) M — Constant Mesh P — Manual Air (Less Installation Kit)
Assembly Arrangement1 or 3
Output Types B — 1¼ Round 5⁄16 KW C — 1410 Companion Flange E — SAE “C” 2 & 4 Bolt I — DIN 5462 K — SAE “B” 2- & 4-Bolt P — SAE “BB” 2- & 4-Bolt Q — SAE “A” 2-Bolt S — SAE “B” 2-Bolt T — ¾ 11 Spline Z — SAE “C” Shaft, SAE “B” Flange 2 — DIN Companion Flange
OUTPUT OPTIONS (CONT)
4.188 106.4
⅜ -16 UNC-2B2 PLCS1.2 29
0.3 7
3.25 83
SAE “A” ¾"-11T SPLINED SHAFT
3.536 89.8
3.536 89.8
½ -13 UNC-2B4 PLCS2.0 51
2.8 71
0.5 13
SAE “C” 1¼"-14TSPLINED SHAFT
2.6 65
1½" - 10TSTRAIGHT SPLINE SHAFT
5.770 146.6
3.540 89.9
3.540 89.9
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.8 71
4.0 102
0.9 22
SAE “C” 1¼"-14TSPLINED SHAFT
“T” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ¾"-11T SPLINED SHAFT
“V” OUTPUT - FOR MUNCIE EXTENDED SHAFT
“X” OUTPUT - 1½"-10T SHAFTFOR COMP FLANGE
“Z” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “C” 1¼"-14T SHAFT
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” ⅞"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” ⅝" SHAFTWITH 5⁄32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” ⅞"-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7" OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” ⅞ -13T SPLINED SHAFT “I” OUTPUT - DIN 5462
201 East Jackson Street • Muncie, Indiana 47305800-367-7867 • Fax 765-284-6991 • [email protected] • www.munciepower.com
Specifications are subject to change without notice. Visit www.munciepower.com for warranties and literature. All rights reserved. © Muncie Power Products, Inc. (2015)A Member of the Interpump Group
MP15-28 (Rev. 05-18)