sguig operation manual

8
1450 Birchmount Road, Toronto, Ontario, Canada M1P 2E3 tel 416 759 5665 fax 416 759 5723 1 800 724 5665 www.keilhauer.com [email protected] Sguig ®

Upload: jeffrey-meltzer

Post on 16-Oct-2014

856 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Sguig Operation Manual

1450 Birchmount Road, Toronto, Ontario, Canada M1P 2E3

tel 416 759 5665 fax 416 759 5723 1 800 724 5665

www.keilhauer.com [email protected]

Sguig®

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 2: Sguig Operation Manual

Sit down. Please. The only way to know if you are adjusting your chair to provide you with maximum comfort,is to make these adjustments while you are seated.

1. Seat Height Adjustment

Use this (to raise or lower seat)

Use the paddle shaped lever on the right side underneath the seat

To raise lift your weight off the seat while lifting the front of the lever

To lower sit on the seat while lifting the front of the lever

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 3: Sguig Operation Manual

2. Tension Adjustment

Use this (to increase or decreasethe tilt tension)

Use the big round knob underneath the centre of the seat

To increase tension turn the knob clockwise

To decrease tension turn the knob counter-clockwise

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 4: Sguig Operation Manual

3. Tilt Lock

Use the paddle shaped lever on the left side underneath the seat

To unlock tilt pull the front of the lever up and tilt back slightly

To lock tilt recline to your desired position and push the front ofthe lever down

Use this (to lock or unlock tilt)

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 5: Sguig Operation Manual

4. Arm Height Adjustment/Sliding Seat Pan

Use this area (to adjust arm height)

Use the buttons on the outside of the arm rests

To raise or lower push the button in and raise or lower the arm restand release button to lock

Use the lever located underneath the seat on the right hand sideof the chair, above the seat height adjustment paddle

Pull the lever out to activate the sliding seat pan and slide yourseat forwards, release the lever to lock the seat into the desireddepth. Pull the lever again and slide backwards to return to thestart position

Use this area(to adjust seat pan)

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 6: Sguig Operation Manual

5. Arm Adjustment

Grasp the front of the arm rest firmly and pivot the arminwards or outwards

To rotate the arms up to 180˚ press the buttons under thefront of the arm rests

Use these (to adjust arms)

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 7: Sguig Operation Manual

6. Back Height Adjustment

Use the sides of the back just above the seat and grab with both hands

To raise lift the back up – you will hear a click for each height increment

To lower lift the back to the highest setting and it will disengageallowing it to drop down to the starting (lowest) height: the back must return to the starting position to reengage theheight adjustment mechanism

Use this area(to raise or lower back)

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2

Page 8: Sguig Operation Manual

© C

OP

YR

IGH

T K

EIL

HA

UE

R 2

00

7

Pelvic Balance Point®

T1-L5 Free Shoulders®

Sguig Syncro HANGTAG-APR2009-NEW IMAGE:Morley HANGTAG 5/2