7/21/2019 SG B7510

1/1

Unzip and extract the files that you have downloaded to a specific folder.Run Odin downloader.Put a check mark on Auto reboot and Protect OPS.Click on OPS to browse and select the OPS file. You need to go the destination folder where you have extracted Bennett_v1.0 ops file.

Put a check mark on One Package and browse and select the firmware file in the last box that is ONE PACKAGE. You will get the following message once firmware file is checked :Check MD5 FileNameMD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tarOpen File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tarCheck MD5 Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9EImage MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9ECheck MD5 ok

Press Power and Q button simultaneously to enter in Download mode.Once you are in the Download mode, connect it to USB data cable and wait for ODIN to detect the phone. Once detected, the COM PORT 1 MAPPING box will become yellow and the phones port will be detected. In the message section, you will get the following message:Check MD5 FileNameMD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar

Open File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tarCheck MD5 Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9EImage MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9ECheck MD5 ok Added!!! Detected!!!

Now click on start. Wait until the green bar in the first box reached to the end. It will reboot your Galaxy Pro twice or thrice.Once done, it will give a message as PASS in the COM PORT box as well as messagesection.Disconnect the phone from USB. Go to Settings > About Phone and check the Firmwa

re Version.Restore the phone back to factory settings to wife off the data. To do it Go toSettings > Privacy settings > Factory Data reset.Once it restarts, shut it down again and insert SD card and SIM card and now your Samsung Galaxy Pro is just like a brand new handset with android gingerbread.You can follow this article if you want to setup up phone for the first time.