sfp transceiver module

SFP Transceiver Module

Description

Fibercasa provides high performance SFP TransceiverModule. The optical transceiver is compliant with the SmallForm-factor Pluggable (SFP) Transceiver Multi SourceAgreement (MSA) and SFF-8472. It offers previouslyunavailable system cost, upgrade, and reliability benefitsby virtue of being hot-pluggable.Transceiver for CWDM, DWDM, PON, and BIDI devicesare all available here. Also, the Transceiver Module weoffer, has a great compatibility which ensure our can becompatible with all the major device provider like Cisco,HP, Juniper, Huawei, Nortel, Extreme, etc.

Feature

Compliant with SFP MSA and SFF-8472 with dual LCreceptacle or single LC receptacle(BIDI)

Hot-pluggable Metal enclosure for lower EMI +3.3V Single power supply Qualified to meet the intent of Bellcore reliability

practices LVPECL logic interface simplifies interface to external

circuitry LVTTL logic level RX LOS Links of 20km with 9/125 µm single mode fiber (SMF)

of typical interconnect distances 0~70°C Case Operate Temperature Range Complies with RoHS directive (2002/95/EC)

Application SDH/SONET SAN(Stroage Area Network) Fiber Channel CWDM System DWDM System FE(Fast Ethernet/100Base Ethernet), GE(1000Base

Ethernet), 10GE(10000Base Ethernet) PON(Passive Optical Network)

Dual Ports SFP Transceiver Module

The most common type of SFP Module, widely usedin SDH/SONET, 100Base Ethernet, 1000BaseEthernet and Fiber Channel.Fibercasa provides 300m~120km all range SFPmodule. To the different detection and transmissionrequirements, we offers VCSEL, FP, DFB, EML lasertransmitters as well PIN and APD receivers. And allthe transceivers Fibercasa offers are with a DDMI function.

Typical Duplex Ports SFP ModuleModel DescriptionFC-047-L155-85-M500-D-LC-C-Y-XX-001

155Mbps, 850nm/MMF SFP Module, 500m, dual LC ports, VCSELTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-L155-13-0020-D-LC-C-Y-XX-001

155Mbps, 1310nm/SMF SFP Module, 20km, dual LC ports, FPTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-L155-13-0040-D-LC-C-Y-XX-001

155Mbps, 1310nm/SMF SFP Module, 40km, dual LC ports, FPTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-L155-15-0080-D-LC-C-Y-XX-001

155Mbps, 1550nm/SMF SFP Module, 80km, dual LC ports, DFBTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-85-M500-D-LC-C-Y-XX-001

1Gbps, 850nm/MMF SFP Module, 500m, dual LC ports, VCSELTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-13-0020-D-LC-C-Y-XX-001

1.25Gbps, 1310nm/SMF SFP Module, 20km, dual LC ports, FPTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-13-0040-D-LC-C-Y-XX-001


FC-047-001-15-0080-D-LC-C-Y-XX-001

1.25Gbps, 1550nm/SMF SFP Module, 80km, dual LC ports, DFBTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-15-0120-D-LC-C-Y-XX-001

1.25Gbps, 1550nm/SMF SFP Module, 1200km, dual LC ports, DFBTransmitter, APD Receiver, 0~70℃ working temperature, with DDM

FC-047-002-85-M300-D-LC-C-Y-XX-001

2.5Gbps, 850nm/MMF SFP Module, 300m, dual LC ports, VCSELTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-002-13-0002-D-LC-C-Y-XX-001


FC-047-002-15-0015-D-LC-C-Y-XX-001


FC-047-002-15-0040-D-LC-C-Y-XX-001


FC-047-002-15-0080-D-LC-C-Y-XX-001

2.5Gbps, 1550nm/SMF SFP Module, 80km, dual LC ports, APDTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

Single Port BIDI SFP Transceiver Module

Single port BIDI SFP Module has the ability to couple Txand Rx signals in one fiber, so it only need one port. Butthis technique also requires the wavelengths of Tx and Rxused on the corresponding end is exactly reverse to it. Forexample, if we use Tx 1310nm/ Rx 1550nm on one side,we must use Tx 1550nm/ Rx 1310nm on the other side.So, as the features statemented above, we only offer the products as a pairwhich means the BIDI SFP is provided 2pcs as a pair to reduce the risk ofincompatible between two BIDI Module.Fibercasa provides 300m~120km all range SFP module. To the differentdetection and transmission requirements, we offers VCSEL, FP, DFB, EMLlaser transmitters as well PIN and APD receivers. And all the transceiversFibercasa offers are with a DDMI function.

Typical BIDI SFP Module No.1Model DescriptionFC-047-L155-13/15-0020-S-LC-C-Y-XX-001

155Mbps, 1310Tx/1550Rx BIDI SFP Module, 20km, single LC ports,FP Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-L155-15/13-0020-S-LC-C-Y-XX-001

155Mbps, 1550Tx/1310Rx SFP BIDI Module, 20km, single LC ports,FP Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

Typical BIDI SFP Module No.2Model DescriptionFC-047-L155-13/15-0040-S-LC-C-Y-XX-001

155Mbps, 1310Tx/1550Rx BIDI SFP Module, 40km, single LC ports, FPTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-L155-15/13-0040-S-LC-C-Y-XX-001

155Mbps, 1550Tx/1310Rx SFP BIDI Module, 40km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

Typical BIDI SFP Module No.3Model DescriptionFC-047-001-13/15-0020-S-LC-C-Y-XX-001

1.25Gbps, 1310Tx/1550Rx BIDI SFP Module, 20km, single LC ports,FP Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-15/13-0020-S-LC-C-Y-XX-001

1.25Gbps, 1550Tx/1310Rx SFP BIDI Module, 20km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM


1.25Gbps, 1310Tx/1550Rx BIDI SFP Module, 40km, single LC ports,FP Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-15/13-0040-S-LC-C-Y-XX-001



1.25Gbps, 1490Tx/1550Rx BIDI SFP Module, 80km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-047-001-15/14-0080-S-LC-C-Y-XX-001




FC-047-002-15/13-0020-S-LC-C-Y-XX-001




FC-047-002-15/14-0040-S-LC-C-Y-XX-001


CWDM SFP Transceiver Module

CWDM SFP Module is commonly used in a CoarseWavelength Division Multiplexing system. FibercasaOffers all 18 channels CWDM SFP Module which thecenter wavelength is from 1270 to 1610 with eachchannel spacing of 20nm.Consider the attenuation features of the earlyG.652 Fiber in 1270 to 1470 band, 1470 to 1610 CWDM SFP Modules aremore recommended(this problem is solved on newer G.652D and G.657fiber)Fibercasa provides 300m~120km all range SFP module. To the differentdetection and transmission requirements, we offers VCSEL, FP, DFB, EMLlaser transmitters as well PIN and APD receivers. And all the transceiversFibercasa offers are with a DDMI function.

Typical CWDM SFP ModuleModel DescriptionFC-047-002-CXX-0040-D-LC-C-Y-XX-001

2.5Gbps, CWDM SFP Module, 1470~1610nm with each spcing of20nm, 40km, dual LC ports, DFB Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

FC-047-002-CXX-0040-D-LC-C-Y-XX-001

2.5Gbps, CWDM SFP Module, 1470~1610nm with each spcing of20nm, 40km, dual LC ports, DFB Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

Note: CXX is the Channel Wavelength Mark. Here, CXX can be C47, C49, C51, C53, C55,C57, C59, C6

View: www.fibercasa.com for more information

http://www.fibercasa.com

sfp transceiver module

Science