sfh 4545 - osram · sfh 4545 1 version 1.5 | 2018-08-10 produktdatenblatt | version 1.1 sfh 4545...
TRANSCRIPT
SFH 4545
1 Version 1.5 | 2018-08-10
Produktdatenblatt | Version 1.1 www.osram-os.com
SFH 4545
Radial T1 3/4 High Power Infrared Emitter (940 nm)
Applications — Electronic Equipment — Industrial Automation (Machine Controls, Light Barriers, Vision Controls)
— Safety and Security, CCTV — Smoke Detectors
Features: — Package: black epoxy
— ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
— High Power Infrared LED — Short switching times
Ordering Information
Type Radiant intensity 1) Radiant intensity 1) Ordering Codetyp.
IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 msIe Ie
SFH 4545 250 ... 1250 mW/sr 550 mW/sr Q65110A8095
SFH 4545-DWEW 400 ... 1250 mW/sr 550 mW/sr Q65111A3701
SFH 4545
2 Version 1.5 | 2018-08-10
Maximum RatingsTA = 25 °C
Parameter Symbol Values
Operating temperature Top min. max.
-40 °C 100 °C
Storage temperature Tstg min. max.
-40 °C 100 °C
Forward current IF max. 100 mA
Surge current tp ≤ 100 µs; D = 0
IFSM max. 1 A
Reverse voltage 2) VR max. 12 V
Power consumption Ptot max. 180 mW
ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD max. 2 kV
SFH 4545
3 Version 1.5 | 2018-08-10
CharacteristicsIF = 100 mA; tp = 20 ms; TA = 25 °C
Parameter Symbol Values
Peak wavelength λpeak typ. 950 nm
Centroid wavelength 3) λcentroid min. typ. max.
920 nm 940 nm 960 nm
Spectral bandwidth at 50% Irel,max ∆λ typ. 42 nm
Half angle φ typ. 5 °
Dimensions of active chip area L x W typ. 0.3 x 0.3 mm x mm
Rise time (10% / 90%) IF = 100 mA; RL = 50 Ω
tr typ. 12 ns
Fall time (10% / 90%) IF = 100 mA; RL = 50 Ω
tf typ. 12 ns
Forward voltage VF typ. max.
1.5 V 1.8 V
Forward voltage IF = 1 A; tp = 100 µs
VF typ. max.
2.3 V 3 V
Reverse current 2) VR = 5 V
IR max. typ.
10 µA 0.01 µA
Radiant intensity 1) IF = 1 A; tp = 25 µs
Ie typ. 4200 mW/sr
Total radiant flux 4) Φe typ. 55 mW
Temperature coefficient of voltage TCV typ. -1.3 mV / K
Temperature coefficient of brightness TCI typ. -0.5 % / K
Temperature coefficient of wavelength TCλ typ. 0.3 nm / K
Thermal resistance junction ambient real 5) RthJA max. 450 K / W
SFH 4545
4 Version 1.5 | 2018-08-10
Brightness Groups TA = 25 °C
Group Radiant intensity Radiant intensity IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 msmin. max.Ie Ie
CW 250 mW/sr 500 mW/sr
DW 400 mW/sr 800 mW/sr
EW 630 mW/sr 1250 mW/sr Only one group in one packing unit (variation lower 2:1).
8000
nm
%
OHF04134
20
40
60
80
100
Irel
λ850 900 950 1025
Relative Spectral Emission 6), 7) Irel = f (λ); IF = 100 mA; tp = 20 ms
SFH 4545
5 Version 1.5 | 2018-08-10
OHF03594
0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚0.40.60.81.0100˚
90˚
80˚
70˚
60˚
50˚
0˚10˚20˚30˚40˚
0
0.2
0.4
0.6
0.8
ϕ
Radiation Characteristics 6), 7) Irel = f (φ)
OHF03821
10-3
mA
101
010
5
5
10-1
-2
5
10
e
e
II
IF
010 110 210 3105 5
(100 mA)
Radiant Intensity 6), 7)
Ie/Ie(100mA) = f (IF); single pulse; tp = 25 µs
OHF03822
FI
10-4
V
100
A
0
FV
-110
5
5
10-2
-3
5
10
0.5 1 1.5 2 2.5
Forward current 6), 7)
IF = f (VF); single pulse; tp = 100 µs
SFH 4545
6 Version 1.5 | 2018-08-10
0.05
210-1-2-3-4-5 1010 1010 10tp
10 10s100
0.1
0.005
0.020.01
D =
TtAIF D = IP
T
F
PtOHF05438
0.20.51
0.033
0.2
0.4
0.6
0.8
1.0
1.2
Permissible Pulse Handling CapabilityIF = f (tp); duty cycle D = parameter; TA = 25°C
T
OHR00880
0
FΙ
0 20 40 60 80 100˚C
mA
25
50
75
100
125
Max. Permissible Forward CurrentIF,max = f (TA); RthJA = 450 K / W
210-1-2-3-4-5 1010 1010 10tp
10 10s100
TtA
IF D = IP
T
F
PtOHF05587
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
10.5
0.01
0.050.10.2
0.02
0.005D =
Permissible Pulse Handling CapabilityIF = f (tp); duty cycle D = parameter; TA = 85°C
SFH 4545
7 Version 1.5 | 2018-08-10
Dimensional Drawing 8)
Approximate Weight: 298.0 mg
Package marking: Cathode
SFH 4545
8 Version 1.5 | 2018-08-10
Pad 1: cathode
Recommended Solder Pad 8)
SFH 4545
9 Version 1.5 | 2018-08-10
TTW SolderingIEC-61760-1 TTW
00
s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚CFirst wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T∆
100 ˚C120 ˚C130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical processDotted line: process limits
< 150 K
SFH 4545
10 Version 1.5 | 2018-08-10
NotesThe evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-tion, annoyance, visual impairment, and even accidents, depending on the situation.
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There-fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810.
Packing information is available on the internet (online product catalog).
For further application related informations please visit www.osram-os.com/appnotes
SFH 4545
11 Version 1.5 | 2018-08-10
Disclaimer
DisclaimerLanguage english will prevail in case of any discrepancies or deviations between the two language word-ings.
Attention please!The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version in the OSRAM OS Webside.
PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Product safety devices/applications or medical devices/applicationsOSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices.In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi-nate the customer-specific request between OSRAM OS and Buyer and/or Customer.
SFH 4545
12 Version 1.5 | 2018-08-10
Glossary1) Radiant intensity: Measured at a solid angle of Ω = 0.001 sr2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse opera-
tion is not allowed.3) Dimensions of active chip area: The active chip area consists of 10 single chips with 1 x 1 mm each.4) Total radiant flux: Measured with integrating sphere.5) Thermal resistance: junction ‐ ambient, mounted on PC‐board (FR4), padsize 16 mm² each6) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif-fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
7) Testing temperature: TA = 25°C8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
SFH 4545
13 Version 1.5 | 2018-08-10
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.