sf-tp12-3-72 product specification (comprehensive)...1972/12/03 · mt-537 — plain end pipe,...
TRANSCRIPT
SF-TP12-3-72
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: November 3, 2020
Page of 1 22
Tower Pipe Frame, 12 ft face, includes pipe
OBSOLETEThis product was discontinued on: July 31, 2015
Product ClassificationProduct Type Tower pipe frame
General SpecificationsMounting Pipe, 63.5–203.2 mm (2-1/2 in to 8 in) OD
Pipe, quantity 3
Tower Taper Non-tapered
DimensionsHeight 1,828.8 mm | 72 in
Face Width 3.81 m | 12.5 ft
Width 3810 mm | 150 in
Length 254 mm | 10 in
Pipe Length 1,828.8 mm | 72 in
Mounting Diameter, maximum 203.2 mm | 8 in
Mounting Diameter, minimum 63.5 mm | 2.5 in
Pipe Outer Diameter 60.96 mm | 2.4 in
SF-TP12-3-72
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: November 3, 2020
Page of 2 22
Outline Drawing
Material SpecificationsMaterial Type Hot dip galvanized steel
Environmental SpecificationsEPA with 1/2 in (12 mm) radial ice 2.36 m² | 25.4 ft²
EPA without ice 1.812 m² | 19.5 ft²
Packaging and WeightsIncluded Antenna mounting pipes | Frame | Stiff arm
Packaging quantity 1
Weight, net 144.197 kg | 317.9 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
SF-TP12-3-72
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: November 3, 2020
Page of 3 22
Included ProductsCO-400 – Crossover Plate, joins 2 in to 5 in OD to 4 in to 9 in OD round
member
MT-537 – Plain End Pipe, 2-3/8 in OD x 126 in
MT-651 – Plain End Pipe, 2-3/8 in OD x 72 in
MT-651-150 – Plain End Pipe, 2-3/8 in OD x 150 in
SA-B – Stiff Arm Mount Bracket for 2-3/8 in OD pipe
XA-1919 – Crossover Angle, 1.9 in to 1.9 in OD
XA-1920 – Crossover Angle, 1.9 in to 2.38 in OD
XA-2020 – Crossover Angle, 2-3/8 in to 2-3/8 in OD
XA-2030 – Crossover Angle, 2.38 in to 2.88 in OD
XA-2035 – Crossover Angle, 2.38 in to 3.5 in OD
XA-3030 – Crossover Angle, 2.88 in to 2.88 in OD
* FootnotesEPA with 1/2 in (12 mm) radial ice EPA—Effective Projected Area
EPA without ice EPA—Effective Projected Area
CO-400
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 4 22
Crossover Plate, joins 2 in to 5 in OD to 4 in to 9 in OD round member
Product ClassificationProduct Type Clamp plate
General SpecificationsMounting Crossover plate
Tower Taper Non-tapered
DimensionsHeight 304.8 mm | 12 in
Width 304.8 mm | 12 in
Length 203.2 mm | 8 in
Mounting Diameter 2, maximum 228.6 mm | 9 in
Mounting Diameter 2, minimum 101.6 mm | 4 in
Mounting Diameter, maximum 127 mm | 5 in
Mounting Diameter, minimum 50.8 mm | 2 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Clamps | Plates
Packaging quantity 1
Weight, net 13.6 kg | 29.983 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
CO-400
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 5 22
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
MT-537
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 6 22
Plain End Pipe, 2-3/8 in OD x 126 in
Product ClassificationProduct Type Plain end pipe
General SpecificationsPipe, quantity 1
DimensionsHeight 60.96 mm | 2.4 in
Width 60.96 mm | 2.4 in
Length 3,200.4 mm | 126 in
Pipe Length 3,200.4 mm | 126 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Pipe
Packaging quantity 1
Weight, net 18 kg | 39.683 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
MT-537
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 7 22
ROHS Compliant
MT-651
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 8 22
Plain End Pipe, 2-3/8 in OD x 72 in
Product ClassificationProduct Type Plain end pipe
General SpecificationsPipe, quantity 1
DimensionsHeight 60.96 mm | 2.4 in
Width 60.96 mm | 2.4 in
Length 1,828.8 mm | 72 in
Pipe Length 1,828.8 mm | 72 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Pipe
Packaging quantity 1
Weight, net 9.5 kg | 20.944 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
MT-651
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 9 22
ROHS Compliant
MT-651-150
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 10 22
Plain End Pipe, 2-3/8 in OD x 150 in
Product ClassificationProduct Type Plain end pipe
General SpecificationsPipe, quantity 1
DimensionsHeight 60.96 mm | 2.4 in
Width 60.96 mm | 2.4 in
Length 3810 mm | 150 in
Pipe Length 3810 mm | 150 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Pipe
Packaging quantity 1
Weight, net 21 kg | 46.297 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
MT-651-150
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 11 22
ROHS Compliant
SA-B
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 12 22
Stiff Arm Mount Bracket for 2-3/8 in OD pipe
Product ClassificationProduct Type Stiff arm mount
General SpecificationsMounting Round and angle legs
Pipe, quantity 0
DimensionsHeight 152.4 mm | 6 in
Width 203.2 mm | 8 in
Length 203.2 mm | 8 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Attachment hardware
Packaging quantity 1
Weight, net 6.078 kg | 13.4 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
SA-B
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 13 22
XA-1919
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: September 18, 2020
Page of 14 22
Crossover Angle, 1.9 in to 1.9 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 48.26 mm | 1.9 in
Mounting Diameter, minimum 48.26 mm | 1.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-1920
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: September 18, 2020
Page of 15 22
Crossover Angle, 1.9 in to 2.38 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 60.96 mm | 2.4 in
Mounting Diameter, minimum 48.26 mm | 1.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-2020
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 16 22
Crossover Angle, 2-3/8 in to 2-3/8 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsMounting Pipe, 60.3 mm (2-3/8 in ) OD
Tower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 60.96 mm | 2.4 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
XA-2020
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 8, 2020
Page of 17 22
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
XA-2030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 4, 2020
Page of 18 22
Crossover Angle, 2.38 in to 2.88 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 73.66 mm | 2.9 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
XA-2030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: December 4, 2020
Page of 19 22
ROHS Compliant
XA-2035
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: September 18, 2020
Page of 20 22
Crossover Angle, 2.38 in to 3.5 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 88.9 mm | 3.5 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-3030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: September 18, 2020
Page of 21 22
Crossover Angle, 2.88 in to 2.88 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 73.66 mm | 2.9 in
Mounting Diameter, minimum 73.66 mm | 2.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-3030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: September 18, 2020
Page of 22 22