Device & Feature Guide

AT&T Velocity™

Power button

WPS buttonmicroSDHC™

Micro USB charging port

Touch screen

SIM card cover/reset button

Set Up Your Mobile HotspotInstall the battery Remove the back cover. Insert the battery. Replace the back cover.Installing a SIM cardYour new Mobile Hotspot SIM card is pre-installed. If you are an existing AT&T customer, replace it with your current SIM (see instructions below). Open the SIM card slot cover. Insert the SIM into the slot with the gold-colored

contacts facing up. Close the slot cover. If your SIM does not fit, call Customer Care at 800-331-0500. Enter your mobile number, select the option for Technical Support, and then follow the prompts to speak to a representative.Insert a microSDHC card (optional) Open the card slot cover. Insert the microSDHC card into

the slot. Close the cover.Charging the batteryThe battery is pre-charged. To recharge, attach the USB cable to the hotspot and connect to:• A wall socket, using the wall charger (fastest

option).• The USB port on your laptop.Note: Supports up to a 32 GB microSDHC card.

Home Screen

Signal strength

Network indicator

New message

Battery

Tap for WPS, Guest Wi-Fi, and other

options

Tap to view messages

Tap to change display, file sharing mode, and other settings

Wi-Fi® network name &

password

1) Activate Your Account Online or By Phone

Online • On a computer that is connected to the

Internet, go to att.com/goactivatedata in the device’s browser.

By Phone • Call 866-707-5550 to activate your account.

Your Account Password • Your mobile hotspot will be assigned a

wireless number.• The last four digits of your wireless number

will be your account password.• You will need this password to manage your

account.• For security, we recommend that you change

this to a secure password not related to the wireless number assigned to this device.

Note: To begin using service, please be sure to add sufficient money to cover the plan you selected. If you do not add money to your account within 26 days of activation, your account will be canceled.

2) Connect to the Internet Turn on your Mobile HotspotPress and hold the Power Button for 2 seconds.

On your laptop or other Wi-Fi devices Find your hotspot’s network name in your

laptop’s list of available wireless networks. Select the Wi-Fi network name

ATT-WIFI-2388, and then click Connect. Input the Wi-Fi network password. Launch your browser.

Notes:• The hotspot’s home screen displays the Wi-Fi

network name and password.• If needed, press the Power Button to wake the

hotspot, then tap and hold the unlock icon.

3) Manage Your AccountCheck your balance, buy a data package, add money, and more• Visit att.com/mygophone or dial 800-901-9878.Renew your plan• Your plan automatically renews on your rate

plan renewal date. To ensure continuous service, be sure to have enough money in your account to cover your rate plan charge.

• If you need more data before your rate plan renewal date, you can purchase a data package.

Add money to your account• Auto Refill is an easy option that keeps your

account active while keeping you in charge. You can use a credit or debit card and choose the amount you want to refill.

• Use a credit/debit card for a one-time refill.• To load funds from a GoPhone Refill Card, visit

att.com/mygophone or call 800-901-9878. Refill cards are available at retail locations nationwide.

Product meets FCC Radio Frequency Exposure Guidelines – FCC ID SRQ-MF923. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ZTE is a trademark of the ZTE Corporation. © 2016 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T.Printed in USA P/N 081704100540

Change Wi-Fi Network Name and Password On your connected Wi-Fi device, log in to

the web UI configuration page by visiting http://attwifimanager or http://192.168.1.1.

The default login is attadmin. Select Settings Wi-Fi in the left-side menu. In Main Wi-Fi Network or Guest Wi-Fi SSID

section, select each item you want to change. Type your new Wi-Fi network name and

password. Click Apply.

Note: If you change the network name or password, you may need to reconnect your other devices to Velocity.

Advanced Connection OptionsGuest Wi-FiProvide one-time access to your mobile hotspot with a second guest network and second password. From the home screen, tap Wi-Fi Guest

Wi-Fi Network. Tap Turn On. The current (default) guest

Wi-Fi network name and password appear.Users can now connect using the Guest Wi-Fi network name and password.

Note: A total of 10 devices can connect, split between Main and Guest Wi-Fi.

Connect WPS DevicesUse Wi-Fi Protected Setup (WPS) to connect WPS-enabled devices without entering the Wi-Fi password. Press and hold the WPS Button on the top

of your Velocity. Tap Pair with Main Wi-Fi. Press the WPS Button on the other device

which you want to connect to Velocity.

Note: Velocity and the other device will find each other and pair.

Advanced Connection Options (continued)

Block/Unblock DevicesTo prevent a device from connecting to the mobile hotspot, add it to the hotspot’s blocked list. You can unblock the device at any time.

Blocking devices From the home screen, tap Wi-Fi

Connected Devices. Select the device you want to block

(there could be more than one page of connected devices).

Tap Block to block the device.

Unblocking devices From the home screen, tap Wi-Fi

Connected Devices Block List. Select the device you want to unblock. Tap Unblock to unblock the device.

For More Information• On the web: att.com/DeviceHowTo• Give us a call: 800-901-9878. When

prompted, enter the 10-digit wireless number associated with your data service. The wireless number is found on the mobile hotspot in Settings About Your Device.

Network IndicatorsYour 4G LTE wireless device will display one of the following network indicators to let you know which of AT&T’s wireless networks you are connected to.

4G LTE: Connected to AT&T’s 4G LTE network. 4G: Connected to AT&T’s HSPA+ network.

Limited 4G LTE availability in select markets. 4G speeds delivered by LTE, or HSPA+ with enhanced backhaul, where available. Compatible data plan required. LTE is a trademark of ETSI. Learn more at att.com/network.A network indicator does not necessarily mean that you will experience any particular upload or download data speeds. Actual upload and download data speeds depend upon a variety of factors, including the device, network utilization, file characteristics, terrain, etc. Learn more at wireless.att.com/learn/articlesresources/wireless-terms.jsp. Your AT&T Wireless Customer Agreement, Section 3.2 Where and How Does AT&T Service Work?

Advanced SettingsChange advanced settings such as the Wi-Fi network name and password, the maximum number of devices, and more by logging in to the web UI configuration page. Connect a Wi-Fi device to your mobile hotspot. From the connected device, open the

web manager http://attwifimanager or http://192.168.1.1.

Login is attadmin.

MenuMain/Guest Wi-Fi

network information

Wi-Fi band

Max devices

File ShareAllows you to share the files on a microSDHC card via Wi-Fi or USB cable.

Access files via Wi-Fi sharing Launch the browser on the device

that is connected via Wi-Fi and enter http://attwifimanager or http://192.168.1.1.

Log in to the web manager (default login is attadmin).

Click File Sharing.

Set sharing via USB On device, tap File Sharing Settings. Tap Mode USB Only.