services, equipment and systems for topsides & floating units€¦ · • the “spar” platform...

November 2013WWW.INTSOK.COM

Services, equipment and systems for

Topsides & Floating Units

Norwegian based companies in the oil and gas sector have a well established reputation and a significant market share as providers of services, equipment and systems to topsides and substructures for fixed and floating production platforms and drilling rigs. In this catalogue we present the cluster of INTSOK part-ners that provide products and services towards topsides in general, as well as for the various types of floating support structures. This catalogue is relevant for: • Oil companies • Engineering and EPC Contractors• Major shipyards• Rig/ship owners

TOPSIDESGenerally topsides comprises of production systems, supporting systems and accommodation for personnel. Its content is derived from the services it delivers in exploit-ing an oil and/or gas field. E.g. separate oil, gas and water, deliver power and other utilities or house personnel.

Its support structure; i.e. Jacket, GBS, SEMI, TLP, SPARs or a floating (monohull) vessels, is designed to support the topsides in the marine environment and in some cases provide storage of the produced liquids. In the early years of offshore developments, jackets were nor-mally used to support the topsides – and in Norway the GBS (Gravity Based concrete Structure) was invented and extensively used. However for water depths exceed-ing 150-200 meters, floating solutions are superior to fixed installations.

FLOATING SUPPORT STRUCTURESFloating support structures have been deployed in a number of specific offshore services to find, develop and produce oil & gas, examples are mobile drilling rigs, service vessels and oil production platforms. While the FPSO has been the preferred floating production solution in most of the world, other solutions have been applied in the US GoM, particularly SEMIs , Tension Leg Platforms (TLPs) and SPAR.

THE SEMI-SUBMERSIBLE. • The SEMI is a specialized vessel with good stability

and sea keeping characteristics. It is commonly used in a number of specific offshore roles such as for off-shore drilling rigs, oil production platforms and heavy lift cranes. It can be dynamically positioned or spread moored. The semi-submersible obtains its buoyancy from pontoons located below sea level. Structural columns connect the pontoons and operating deck, which can be located high above the sea level and waves due to the good stability of the concept.

THE TENSION-LEG PLATFORM. • The TLP is a vertically moored floating structure

used for oil & gas production in water depths

normally greater than 300 meters. The platform is permanently moored by means of groups of tethers (i.e. tension legs) at each of the structure’s corners. The tension leg design eliminates vertical motion of the platform, allowing the platform to have dry X-mas trees on deck, connected directly to the subsea wells by rigid risers. This allows a simpler well completion and easier access for well intervention.

• The “SPAR” platform is a deep-draft floating caisson, which is a hollow cylindrical structure similar to a very large buoy. The spar relies on a traditional spread mooring system, to maintain its position. The SPAR design is now being used for drilling and production. The distinguishing feature of a spar is its deep-draft hull, which produces very favorable motion charac-teristics compared to other floating concepts. Low motions and a protected centre-well also provide an excellent configuration for deepwater operations.

THE FLOATING PRODUCTION, STORAGE AND OFFLOADING UNIT. The FPSO is the dominant type of FPU and constituted around 70% of the FPU market in 2010. The FPSO is a floating vessel designed to receive hydrocarbons pro-duced from nearby platforms or subsea templates, sepa-rate the oil and gas and water, and store the oil until it can be offloaded onto a tanker. The FPSOs are particularly effective in remote or deepwater locations where subsea pipelines are not cost effective. In harsh environments the risers are connected to the vessel, through a turret, which allows the vessel to weather-wane. Alternatively, in benign environments like West Africa the FPSO can be spread moored and risers connected to the vessel at the side. FPSOs have historically been constructed by con-verting tanker vessels for oil production purposes, but in recent years there has been a shift towards purpose built FPSOs designed for given field parameters.

FPSO’S FOR LIQUEFACTION OF NATURAL GAS. These are called FLNG and there are currently several FLNG projects in execution. To mention a few: Malaysia has the PETRONAS’ Kanowit FLNG project and Australia has Shell’s Prelude FLNG project. Shell has entered into a frame agreement with the Technip/Samsung consortium to develop up to 10 FLNG units over a 15 year period and now several FLNG units are planned for the Browse field.

The selection of the floating support structure depends on the following criteria:• Dry or wet trees• Storage requirement• Available pipeline infrastructure• Operator familiarity• Field life • Cost• Area/field development plan (hub, tie-backs etc)

Introduction

2

http://en.wikipedia.org/wiki/Oil_platformhttp://en.wikipedia.org/wiki/Subseahttp://en.wikipedia.org/wiki/Tanker_(ship)

FPU Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ABB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

AGILITY GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

AIBEL AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

AKER SOLUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

ALFSEN OG GUNDERSON AS. . . . . . . . . . . . . . . . . . . . . . . . .12

AUTRONICA FIRE & SECURITY . . . . . . . . . . . . . . . . . . . . . . .13

AXESS AS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CAMERON SENSE AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

CMA CONTIKI AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

ComputIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

DELTA-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DNV GL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

DRESSER-RAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ENERGY PIPING AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

EUREKA PUMPS AS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

FMC TECHNOLOGIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Force Technology Norway as . . . . . . . . . . . . . . . . . . . . . . . . 24

FRANK MOHN AS OIL & GAS . . . . . . . . . . . . . . . . . . . . . . . . . 25

Freudenberg Oil & Gas Technologies . . . . . . . . . . . . . . 26

GEXCON AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Glamox Global Marine & Offshore. . . . . . . . . . . . . . . . . . 28

GMC HVAC AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

HARDING SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

HERNIS SCAN SYSTEMS AS . . . . . . . . . . . . . . . . . . . . . . . . . .31

IKM Laboratorium AS EI&P Division . . . . . . . . . . . . . . . . 32

IKM TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

IMENCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

INOCEAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Jotun Performance Coatings . . . . . . . . . . . . . . . . . . . . . . . . 36

K. LUND OFFSHORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

KONGSBERG MARITIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Lloyd’s Register Consulting . . . . . . . . . . . . . . . . . . . . . . . . . 39

LMG Marin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

MARINE ALUMINIUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

MARINE CYBERNETICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

MULTI PHASE METERS (MPM) . . . . . . . . . . . . . . . . . . . . . . . 43

NLI SOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

NORSAFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

NOVENCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

OneSubsea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

OGLAEND SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

PALFINGER DREGGEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

PETRELL AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

PETROLINK AS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

PG Group – Ing Per Gjerdrum AS . . . . . . . . . . . . . . . . . . . . 52

PON POWER AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

ProSep Norway AS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Rapp Bomek. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

ROLLS ROYCE MARINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

ROXAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

SCANA INDUSTRIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

SEVAN MARINE ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

SHARECAT SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

SIEMENS OIL & GAS SOLUTIONS . . . . . . . . . . . . . . . . . . . .61

Simtronics / Water Mist Engineering . . . . . . . . . . . . . . 62

Solberg Andersen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

TEAMTRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

THERMTECH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Wilhelmsen Technical Solutions . . . . . . . . . . . . . . . . . . . . 66

WÄRTSILÄ OIL & GAS SYSTEMS . . . . . . . . . . . . . . . . . . . . 67

Contents

3

Engineering & Technical Services Equipment & systems suppliers Drilling

Tops

ides

eng

inee

ring

Mar

ine

engi

neer

ing

&

moo

ring

desi

gn

Tech

nica

l & p

rodu

c-tio

n se

rvic

es

Adm

inis

trat

ion

& IT

se

rvic

es

Elec

tric

/ aut

omat

ion/

te

leco

m

Cran

es, li

ftin

g &

m

oorin

gs

Proc

ess e

quip

men

t

Rota

ting

equi

pmen

t

Safe

ty e

quip

men

t

Oth

er m

echa

nica

l eq

uipm

ent

Dril

ling

syst

ems

ABB www.abb.no

Agility Group www.agilitygroup.no

Aibel www.aibel.com/en

Aker Solutions www.akersolutions.com

Alfsen og Gunderson www.ag.no

Autronica Fire & Security www.autronicafire.com

Axess www.axess.no

Cameron Sense www.c-a-m.com

CMA Contiki www.cmacontiki.no

Computit www.computit.no

Delta-P www.delta-p.no

DNV GL www.dnv.com

Dresser-Rand www.dresser-rand.com

Energy Piping www.energypiping.no

Eureka Pumps www.eureka.no

FMC Technologies www.fmctechnologies.com

FORCE-Technology www.forcetechnology.no

Frank Mohn AS Oil & Gas www.framo.no

Freudenberg Oil & Gas Technologies www.vectortg.com

Gexcon www.gexcon.com

Glamox www.glamox.com

GMC HVAC www.gmc.no

Harding Safety www.schat-harding.com

Hernis Scan Systems www.hernis.com

IKM Laboratorium (E.I&P Division) www.ikm.no

IKM Testing www.ikm.no

IMENCO www.imenco.no

Inocean www.inocean.no

Jotun Performance Coatings www.jotun.com

K. Lund Offshore www.kl-offshore.no

Kongsberg Maritime www.kongsberg.com

Lloyds Register Consulting www.lr.org

Capability Matrix

4

Engineering & Technical Services Equipment & systems suppliers Drilling

Tops

ides

eng

inee

ring

Mar

ine

engi

neer

ing

&

moo

ring

desi

gn

Tech

nica

l & p

rodu

c-tio

n se

rvic

es

Adm

inis

trat

ion

& IT

se

rvic

es

Elec

tric

/ aut

omat

ion/

te

leco

m

Cran

es, li

ftin

g &

m

oorin

gs

Proc

ess e

quip

men

t

Rota

ting

equi

pmen

t

Safe

ty e

quip

men

t

Oth

er m

echa

nica

l eq

uipm

ent

Dril

ling

syst

ems

LMG Marin www.lmgmarin.no

Marine Aluminium www.m-a.no

Marine Cybernetics www.marinecybernetics.com

Multi Phase Meters (MPM) www.mpm-no.com

NLI Solutions www.nli.no

Norsafe www.norsafe.no

Novenco www.novencogroup.com

OneSubsea www.onesubsea.com

Oglaend System www.oglaend-system.com

Palfinger Dreggen AS www.palfinger.com

Petrell www.petrell.no

Petrolink www.petrolink.no

PG Pump Solutions www.pg-marinegroup.com

Pon Power www.pon-cat.com

ProSep www.prosep.com

Rapp Bomek www.rappmarine.com

Rolls Royce Marine www.rolls-royce.com

Roxar an Emerson company www.roxar.com

Scana Industrier www.scana.no

Sevan Marine www.sevanmarine.com

Sharecat Solutions www.sharecat.com

Siemens www.siemens.no

Simtronics www.simtronics.eu

Solberg Andersen www.saas.no

Teamtrade www.teamtrade.no

Thermtech www.thermtech.no

Wilhelmsen Technical Solutions www.wilhelmsen.com

Wärtsilä / Hamworthy www.wartsila.com

5

DRILLINGDRILLING SYSTEMS

EQUIPMENT & SYSTEMS SUPPLIERSELECTRIC/AUTOMATION/TELECOMCRANES, LIFTING & MOORINGSPROCESS EQUIPMENTROTATING EQUIPMENTSAFETY EQUIPMENTOTHER MECHANICAL EQUIPMENT

ENGINEERING & TECHNICAL SERVICESTOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGNTECHNICAL & PRODUCTION SERVICESADMINISTRATION & IT SERVICES

ABB

ABB is a global leader in power and automation technologies that enable our customers to improve their performances while lowering environmental impact.

Innovation through experience and proven ability to handle large projects in automation, telecommunication and electrification including e-house distinguish ABB as a highly competent supplier to the offshore industry. Combined with the traditional range of products, systems and solutions, ABB delivers turn-key plants and modules to the Oil & Gas industry.

PRODUCTS ABB combines innovative automation, electric, telecom-munication solutions and EPC know-how, for the off-shore Oil and Gas industry including fixed, floating and subsea facilities. The Portfolio specific to market are:

FULL ELECTRICAL-CONTROL-INSTRUMENT-TELECOM (ECIT) INCLUDING:• e-House modules• Electrification• Power and Energy Management• Power-from-shore (HVDC LIGHT)• AC/DC Drilling Drives• A complete range of AC electric propulsion and

thruster systems• Azipod® Propulsion• Integrated Operations• Remote Operations• Safety and Automation System• Historian & Information Management• Instrumentation• Asset Management

TURN-KEY EPC DELIVERY OF TOPSIDE MOD-ULES INCLUDING:• Flare Systems• Water Injection• Fuel Gas• Process separation and PW treatment• Compression and Gas Treatment (TEG)• Close/Open Drain Systems• Power Gen Modules• On-skid Fire & Gas and Safety systems• Pipe-racks with integrated process piping and cable trays

SERVICESABB can participate and contribute in all phases of a project from feasibility study to operation as Main Instrument/Automation Contractor, Main Electrification Contractor, Main Telecommunication

Contractor or as combination of the above. The actives include:• Project Management• Studies• Engineering Design• Procurement• Configuration/Integration• Start-up• Commissioning• Training• Full service• WW After Market Services

REFERENCES ABB has delivered to more than 60 FPSO and have references in the complete LNG value change

Year Name Owner Location2013 Dana Western Isles FPSO Dana UK2013 Heidrun FSU Statoil Norway2013 Ichthsy Turret Inpex Australia2013 Bouri-Gaza FSO MOG Libya2013 Ichthsy FPSO Inpex Australia2013 Ichthys CPF Inpex Australia2013 Aasta Hansteen Statoil Norway2012 Kikeh FPSO SMB Offshore Malaysia Malaysia2012 Greater Stella FPU Petrofac UK2012 Balnaves FPSO (FPSO Armada Claire) Bumi Armada/APACHE Australia2011 ONGC D1 Bumi Armada/ONGC India2011 OSX 3 Modec Brazil2011 Knarr Teekay/BG Norway2010 P-62 Quip/Petrobras Brazil2010 P-58 Quip/Petrobras Brazil2010 P-63 Quip/Petrobras Brazil2010 Goliat ENI Norway2010 Aseng SBM Equatorial Guinea2010 Guara MODEC Brazil2010 Tupi NE SBM Brazil

Contact person: Stein GuldbrandsøyTitle: V.P: Global FPU Business ManagerE-mail address: [email protected] website: www.abb.com

66

mailto:[email protected]




Agility Group is a complete supplier of engineering, procurement, construction, installation and completion (EPCIC) solutions to the offshore oil and gas market.

Agility Group undertakes projects within design and engineering of new drill ships and semisubmersibles, as well as modification and conversions of older semi-submersibles, FSOs & FPSOs, shuttle tankers and other offshore and marine floaters.

Agility Group has extensive experience with delivering engineering services and solutions related to FPSOs, FSOs, mobile drilling and well intervention units. For engineering and modification projects on semi-submersible vessels, Agility Group have more than 30 years of experience.

PRODUCTSEngineering services and multidiscipline EPCIC projects:• Greenfield developments• FSOs/FPSOs/Shuttle tankers• Semisubmersible design• Marine systems• Process and drilling modules• Naval architecture• Minox ® Deoxygenation Technology• PetroFlame ® burner booms

REFERENCES A selection only, please contact Agility Group for a full list of references.

Project Client TechnologyGina Krog FSO Teekay Shipping Norway ConversionAll units Dolphin Drilling Class and modification projectsGG5000, AG5000 COSL Basic design semi newbuildsKMZ Topside BW Offshore Process Topside EPCClov DSME Minox® DeoxygenationPetroflame® Seadrill, Odfjell Drilling, others Burner booms

AGILITY GROUPContact person: Odd MohusTitle: EVP SolutionsE-mail address: [email protected] website: www.agilitygroup.no

77




Aibel is a provider of products and services to the upstream oil and gas industry.

Aibel has 8 locations in Norway and 4 intenational loca-tions. Our international project management and engi-neering locations include UK, Denmark, Singapore and Thailand. We have two major fabrication and assembly yards in Haugesund in Norway and Laem Chabang in Thailand.

Aibel has a total of about 6500 permanent employees and a work force of close to 10.000 including our subsidiaries.

PRODUCTSTopside decks, FPSO topsides/modules, process systems, onshore terminals.

SERVICESThe core competence includes concept and FEED stud-ies, Engineering, Procurement and Construction (EPC) contracts for complete platform and FPSO topsides, process systems, onshore terminals, maintenance, modification and operation.

REFERENCES A selection only, please contact Aibel for a full list of references.

Project Client TechnologyAlvheim FPSO Marathon FPSO EPCICVolve FPU/MOPU Mærsk/Statoil MOPU EPCICVincent FPSO Mærsk/Woodside FPSO EPCEttrick FPSO Bluewater/Nexen FPSO EPCGolfinio II FPSO Saipem/Petrobras FPSO EPCCinguetti FPSO BWO / Woodside FPSO EPCTroll C FPU Hydro FPU EPCVisund FPU Hydro FPU EPC

P-74 Topside EBR /Petrobras FPSO FCOSX-3 Topside Modec / OGX FPSO FCGuara Topside Modec / Petrobras FPSO FCTupi Topside Modec / Petrobras FPSO FCSao De Matteus Modules Prosafe / Petrobras FPSO FCSmart 1 Modules Aker / Reliance FPSO FC

Contact person: Øyvind VigelandTitle: Business DevelopmentE-mail address: [email protected] website: www.aibel.com AIBEL AS

8




Aker Solutions provides oilfield products, systems and services for customers in the oil and gas industry world-wide. Our knowledge and technologies span from reservoir to production and through the life of a field.

Aker Solutions brings together engineering and technologies for oil and gas drilling, field development and production. The company employs approximately 28 000 people in more than 30 countries, who apply the knowledge and create and use technologies that deliver our customers’ solutions.

BROAD PORTFOLIO AND EXPERIENCEOur portfolio of oilfield products, systems and services, stretches all the way from the reservoir to the well stream processing systems generating marketable and valuable hydrocarbon products. Our target is to deliver the best. Each product, system and service competes on a standalone basis in the market. But, with our broad portfolio and experience, we understand the challenge and apply the knowledge to create optimal solutions.

Aker Solutions ASA is the parent company in the group, which consists of a number of separate legal entities. Aker Solutions is used as the common brand and trade-mark for most of these entities. In 2012 Aker Solutions had aggregated annual revenues of approximately NOK 44, 9 billion. The company is listed on the Oslo Stock Exchange.

OUR VISION AND VALUESOur vision sets the overall goal for our business. Our values and the importance we give them must be reflected throughout our organisation and in every aspect of how we do business, every day.

Our vision is to be the preferred partner for solutions in the oil and gas industry through living our values.

All Aker Solutions employees share a common set of values – the compass that guides our policies, our operations and ultimately, our behaviour.

OUR VALUES ARE• Customer drive• HSE mindset• People and teams• Open and direct dialogue• Hands-on management• Delivering quality results

PRODUCTS AND SERVICESEach product, system and service competes on a standalone basis in the market. However, with our broad portfolio and experience, we understand the challenge and apply the knowledge to create optimal solutions.

Our products and services are structured into nine different business areas, which together can offer all technologies and services needed for the life of a field.

FRONT END SPECTRUMAker Solutions’ spectrum of in-house capability is unique in the oil and gas industry. It comprises our extensive experience, throughout the entire life cycle of a field, from the geological evaluation of prospects through project development, operations, modifica-tions and maintenance to decommissioning. Now we are utilising this by setting up a global organisation covering the entire spectrum of competencies needed in early phase work. Front End Spectrum – Feasibility and concept engineering by Aker Solutions.Front End Spectrum removes the traditional discipline barriers and executes projects in integrated teams producing early phase studies with a holistic scope. All with one overall goal: to increase the value of the field.

Front End Spectrum is a response to market demand. As the oil and gas industry is moving towards ever more complex, challenging and marginal fields, the need for a holistic approach in early phase work is increasing. During the last few years Aker Solutions has conducted several studies following the Front End Spectrum methodology providing the customer with:

• Consistent concepts from reservoir to facilities• Realistic field development schedule• Safer operations• Operational predictability• Reliable cost estimates on all alternatives

As the market leader for the North Sea maintenance and modification markets, we have a unique insight into the production phase of a field. As-built information and performance data from production are continuously fed into our databases, which form an important basis for further improvement of future development projects. Through four decades, we have been supporting clients with a better decision process in early phase work.

DRILLING TECHNOLOGIESAker Solutions delivers drilling equipment, systems and lifecycle services for application on onshore and offshore drilling units. We have delivered complete drilling rig packages and individual high performance equipment to several hundred drilling units over many decades. We offer complete drilling equipment packages, including project management, engineering, procurement and on-site commissioning.

Contact person: Tel +47 67 51 30 00Or see the contact page at www.akersolutions.com to find the right contact person for a location, product or service.Company website: www.akersolutions.com AKER SOLUTIONS

9




AKER SOLUTIONSContact person: Tel +47 67 51 30 00Or see the contact page at www.akersolutions.com to find the right contact person for a location, product or service.Company website: www.akersolutions.com

We provide worldwide customer support through our global drilling lifecycle services organisation. Services include spare parts, technical support, overhaul/modifi-cations and professional rig crew training. Our state-of-the-art drilling equipment simulators are operating in Norway, Singapore, South Korea, Houston and Brazil.

MOORING AND LOADING SYSTEMSAker Solutions provides Pusnes deck machinery and mooring and loading systems for marine and offshore applications. Close co-operation with classification societies and maritime authorities, combined with innovative design, quality products and worldwide lifecycle services, ensure the high quality of the Pusnes products. Our portfolio of products also includes steer-ing gear and loading arms.

PROCESS SYSTEMSAker Solutions supplies process equipment for the treatment of oil, gas, produced water and solids for the upstream oil and gas industry, offshore as well as onshore.

Our product range covers all relevant process stages. Products and services include crude and heavy oil treatment, gas conditioning, hydrate inhibition (MEG reclamation and regeneration), sulphate removal, VOC recovery and sand management systems.

Lifecycle services and support for Aker Solutions processing systems technologies include installations, service support, spare parts supply and studies/performance evaluations. We assist in the development, installation and operation of oil and gas fields onshore and offshore.

Subsea processing facilities range from simple two phase separation, to three phase separation with oil boosting, re-injection of produced water, and compression.

PRESSURE VESSELSAker Solutions delivers pressure vessels utilising a variety of steel from Midsund, on the west coast of Norway. We supply all kind of pressure vessels up to a total weight of 600 tons in all the common types of materials. Products include separators, scrubbers, slug catchers, coalescers, degassers, KO drums, hydrophores, dehydrators and many more. We have comprehensive experience using high-tensile carbon steel (e.g. P500) and stainless qualities (e.g. duplex), and performing internal cladding of complete vessels and nozzles in-house (e.g. Inconel 625).

Aker Solutions produces pressure vessels such as sulphur absorber, vent wash columns, vent scrubbers, reactors for polystyrene, amine absorbers, test scrub-bers, demisting scrubbers and boilers.

TOPSIDES ENGINEERINGAker Solutions has been designing, engineering, fabri-cating, completing and delivering platforms for more than 40 years. We have been one of the major contribu-tors to the offshore technology development. During this period we have designed and delivered close to 40 production platforms, whereof 6 with topsides weight of more than 30 000 tons.

We have executed major projects world-wide, and have developed oil and gas installations ranging from large complex installations in the deep, hostile North Sea and arctic climate, to facilities for small and marginal fields in shallow waters. Our multi-discipline organisation covers all the technical and administrative functions needed to execute engineering tasks for complex topsides.

For detail engineering, Aker Solutions works out of Oslo, London, Mumbai and Kuala Lumpur to secure cost-effective project execution for our customers.

FLOATERSAker Solutions designed and delivered the first floating drilling rigs in the late 1960’s. Today we offer a full range of floaters, covering semisubmersible drilling- and pro-duction rigs, Tension leg platforms, Spars and FPSO’s.

Semisubmersible drilling rigsAker Solutions has been responsible for the design and construction of a large number of the semi-submersible drilling rigs delivered for worldwide operations. A total of 39 units of Aker H-3, H-4 and H-6 design have been built. 20 delivered from own yards, the remaining built by other yards on license. Recently, the success of the Aker H-3/H-4 has been followed up with the Aker H-6e, likely the world’s most advanced semisubmersible drilling rigs. They are specially designed to meet high environmental standards and can operate in ultra-deep waters, harsh environments, and extreme temperatures and at long distances from supply infrastructure. The latest concept is the H-6x, tailored for harsh environ-ment and mid-water operations (1500 meters water depth). The hull is identical to the well proven H-6e design. Operational experience from the two H-6e units Transocean Spitsbergen and Transocean Barents and new industry demands are embedded in the design. The H-6x features large deck areas, storage and pay load capacities, and is prepared for full winterisation.

10




AKER SOLUTIONSContact person: Tel +47 67 51 30 00Or see the contact page at www.akersolutions.com to find the right contact person for a location, product or service.Company website: www.akersolutions.com

Tension leg platformsAker Solutions has a long experience on Tension leg platforms (TLP) design and has developed several new TLP concepts for a series of water depths, produc-tion capacities and environmental conditions, and is dedicated to make TLP an attractive solution for even deeper waters.The group also has got long experience in scaled model tests of TLP for all phases and components for a TLP, from installation tests to in-place tests for hull and tethers. In the last few years, Aker Solutions has assisted operating companies in TLP evaluations for West of Shetland, Australia, Malaysia as well as Norway.

SparA Spar is a type of floating oil platform used in ultra-deep waters. The concept consists of a large vertical cylinder supporting a two-side deck. After being responsible for the delivery of the world’s first Spar platforms for Neptune, Genesis and Hoover/Diana developments in Gulf of Mexico, Aker Solutions is back in the Spar-market. And of course with further develop-ment of the concept. We have been designing a Spar hull alternative for the world’s largest Spar for the Aasta Hansteen-field for Statoil. This is the world’s first Spar with in-hull

condensate storage and direct off-loading capabilities for condensate to shuttle tankers. The concept is qualified for the harsh environment off the coast of the northern part of the North Sea. With this as a reference, the design has been adapted to Gulf of Mexico function-ality and environment.

FPSOWith a comprehensive product portfolio ranging from our well known Tentech™ FPSO design to generic designs; Aker Solutions is a frontrunner in the develop-ment of purpose-built floating production, storage and offloading (FPSO) facilities for oil and gas. Aker Solutions has designed eight of the FPSOs currently operating in the North Sea and the Norwegian Sea, representing more than 50% of all purpose-built ship shaped FPSOs.We design vessels that have proven its capability of producing oil under harsh, semi-arctic conditions. As exploration and development of new field’s move towards deeper and more remote waters, Aker Solutions’ FPSOs is a relevant option for a significant number of new projects globally, the latest has been the FEED for Ichthys, off Australia.

REFERENCES Aker Solutions’ products and services, spans from reservoir to production and through the life of a field. Our global organisation offers expertise and product lifecycle services in all regions. The list below shows only a few examples of products and designs delivered for floating installations. For a more comprehensive list please contact us, or see www.akersolutions.com.

Project Client TechnologyHeidelberg Anadarko Mooring SystemP58/P62 FPSOs Petrobras Mooring and Offloading SystemsGoliat FPSO ENI Mooring SystemHalfdan B Maersk Oil & Gas/Smoe Inlet separatorGudrun Topside Separation Statoil/Aibel Separator and scrubber packagesHai Yang Shi You 981 China International Offshore Oil

CorporationAnchoring, and drilling- and mud packages for ultra deepwater drilling semi-submersible unit

Platinum Explorer DSME Shipbuilding and Offshore Drilling- and mud packages for ultra deepwater drill ship

Gjøa Statoil Semisubmersible production platform

Aker H-6e Aker Solutions Semisubmersible drilling dual ram rigs

Skarv FPSO BP Floating production storage and production vessel

Ekofisk 2/4 Z Conoco Phillips Topside for well head platformBlind Faith Chevron Deep draft Semisubmersible hull

11




Alfsen og Gunderson supplies a large scale of equipment for transport and treatment of water and process fluids offshore. Our scope of supply includes Chemical injection systems, centrifugal pump packages, high pressure pumps, filters, mixers and equipment for disinfection of water based on dosing of chlorine or UV-radiation. The equipment can be supplied in many different materials according to the customer requirements.

A thorough knowledge of customers’ processes and requirements is vital if we are to give the best possible service. Close, long-term cooperation is essential to develop and perfect our systems. With efficient systems, thorough working methods and punctual deliv-eries, we aim to create added value for our customersAlfsen og Gunderson is accredited in Achilles.

PRODUCTSDescribe relevant products based on your entry in the matrix• Chemical- and methanol injection pump packages• Mixing Cabinets and tank systems including agitators

and control equipment• Miscelleaneous pump packages• Basket Strainers, Cartridge Filters and Bag Filters

• Automatic Backwash Filters• Kenics Static Mixers• Agitators for Drilling Fluids • UV-sterilizers – Atex approved and certified by FHI• Dehumidifier solutions

SERVICESDescribe relevant services based on your entry in the matrix• Package supplier for potable water treatment• Design• Project Management• Equipment delivery• Commissioning• After Sales

REFERENCES A selection only. A complete reference list is available upon request.

Project Client TechnologyFPSO:Goliat Hyundai/ENI CIP, Mixing cabinet, Bilge pumps, Mixing/

tote tanksNorne Aibel/Statoil Mixing cabinet, tank and pump systemsKollsnes Aker Solutions/Statoil Pump package consisting of 40 pump

skid units

Platforms:Gudrun Aibel/Statoil Potable water filtration and

UV-disinfectionTambar Aker/BP Seawater FiltrationStatfjord B and C Aker/Statoil Potable water UV-disinfection

Contact person: Gard ChristensenTitle: Department ManagerE-mail address: gard.christensen@email Company website: www.ag.no

ALFSEN OG GUNDERSON AS

12




Autronica Fire and Security AS is a leading innovator, producer and international supplier of advanced sensors and system for Fire & Gas Detection developed for the global petrochemical- oil and gas industry.

Since Autronica was founded more than fifty years ago, the company has paved the way for Fire & Gas System development. Many of Autronica’s new developments have later become a global standard like the Analogue Addressable Fire Detection System, which was intro-duced to the market more than thirty years ago.

PRODUCTS The product range includes:• AutroSafe fire detection• AutroSafe IFG (Integrated Fire & Gas Detection)

with SelfVerify; the word’s only IEC 61508 Safety Integrity Level 2 (SIL 2) certified integrated Fire & Gas Detection System.

• AutroSafe IFG provides high-resolution diagnostic and full diagnostic and full detection chamber

self-testing and calibration every 24 hours. This reduces the maintenance cost significantly.

Autronica offers a full range of flame and gas detectors:• High Sensitive Smoke Detection (HSSD)• Alarm displays• AutroMaster colour-graphic presentation• Alarm management and control system

SERVICES Service offered includes:• System design• Project management• Installation and commissioning supervision• After sales service• Training

REFERENCESAutronica Oil & Gas Division has a comprehensive global reference list. Sample of references are:

FPSO: Drilling Vessel: Semi Submersible: Refineries:Petrobras P51 Transocean P5903 NORBE VI EstacaoPetrobras P52 Tanker Pacific H1809 Noble Dave Beard Tout Lui Raut RefineryPetrobras P56 Saipem H1867 Sevan Driller MongstadCascade Chinook Pride 1 H1786 Sedco 711 Ras LaffanEspirito Santos Schahin H1870 Seadrill 13 Zuetina

Contact person: Bjørn Willy KjaerTitle: Sales & Marketing DirectorE-mail address: [email protected] website: www.autronicafire.com

AUTRONICA FIRE & SECURITY

13




Axess is a high competence partner to our customers in achieving long term benefits, helping them reach their goals of maximum production and zero harm. We deliver this through being a leading provider of world-class integrity solutions. We assist in all phases from design to decommissioning, all over the world.

Axess has long term contracts with international companies from the rig-, oil/gas-, offshore- and energy industries. Our head office is in Molde, and we are also situated in Bergen, Trondheim, Kristiansund, Orkanger, Houston, Rio de Janeiro, St John’s and Singapore. Axess has 300 employees.

In 2012 Axess performed work for more than 150 off-shore units in all parts of the world.

SERVICESLifecycle – phase: FEED/detailed engineering: • Crane and lifting technology• Material handling and layout• Maintenance engineering• Integrity engineering

• Specialist services in compliance with Norwegian and Brazilian regulations

Construction/mechanical completion, commissioning:• Crane and lifting technology• Material handling• QC services• Specialist services in compliance with Norwegian and

Brazilian regulations

Operation:• Crane and lifting technology• Safe lifting operations• Maintenance management• Integrity management and inspection services• Specialist services in compliance with Norwegian and

Brazilian regulations

REFERENCES A selection only, please contact Axess AS for a full list of references.

FPU Client Technology (Services)Peregrino BW Offshore • Integrity management and inspection services

• Specialist services in compliance with Brazilian regulationsFluminence MODEC • Crane and lifting technologyCidade de Itajai Teekay Petrojarl • Specialist services in compliance with Brazilian regulationsNorne Statoil • Crane and lifting technology

• Safe lifting operations• Integrity management and inspection services• Specialist services in compliance with Norwegian regulations

Hummingbird Spirit Teekay Petrojarl (Former Sevan Marine)

• Integrity management and inspection services

Knarr Teekay Petrojarl • Crane and lifting technology• Material handling and layout• Specialist services in compliance with Norwegian regulations

P-63 Papa Terra BW Offshore • Specialist services in compliance with Brazilian regulationsKnock Allan Fred Olsen Production • Integrity management and inspection servicesGoliat Eni • Crane and lifting technology

Contact person: Thomas VekveTitle: Ph.D. Business Development Director O&GE-mail address: [email protected] Company website: www.axess.noAXESS AS

14



Cameron Sense delivers the following to the international energy industry:

• Complete drilling packages for offshore applications• High performance drilling equipment• World class control systems

Competence, drive and experience make us a strong partner, providing unique solutions and advanced technologies. Our advanced products demonstrate our commitment to develop next-generation solutions. Our automated drilling equipment allows the entire opera-tion to be remote controlled from the drilling control room. This makes our products safer, more reliable and easier to use.

PRODUCTS &SERVICES• Offshore Drilling Packages• Drilling Control Systems• Hoisting & Rotation Equipment• Pipe Handling Equipment• Drill Floor Tools• BOP Handling Equipment• Mud Systems• Services

REFERENCES Drilling Packages

Client: PPL Design: BMC-400Owner: Oro NegroName: TBA Scope of supply 6x Drilling packages;- Top Drive Equipment- Drawwork Equipment- Mud Pumps - Drillfloor tools Equipment- BOP incl. BOP handling Equipment- Integrated Control System PackageYear sold: 2013

Client: SWS Design: JU 2000EOwner: PODName: TBAScope of supply Complete drilling package;- Derrick with Equipment- Drilling Equipment- Pipe Deck Equipment- BOP incl. handling BOP equipment- Mud Systems- Integrated Control System PackageYear sold: 2013

Client: YZJ Design: LeTourneau Super E116Owner: Mena DrillingName: TBA Scope of supply Complete drilling package;- Drilling Equipment- Drillfloor Equipment- Pipehandling Equipment- BOP- Mud pumps- Integrated Control System PackageYear sold: 2013

Contact person: Vibeke B. B. HåverstadTitle: Marketing ManagerE-mail address: [email protected] website: www.c-a-m.com

CAMERON SENSE AS


15




Founded in 1989, CMA Contiki is a software company that specializes in Contract Management and Sourcing solutions for oil and gas exploration companies and contractor industries. CONTIKI™ is suited for both large multinational operators and contractors, but also small business units with only a handful of contracting personnel.

Contiki manages all kinds of commercial contracts, such as strategic procurements, joint venture, partnering, sales and project contracts. CONTIKI is proven through 22 years and was in 2013 rated by Gartner as “best-in-class” within post execution contract management capabilities.

PRODUCTS On-premises software solution offerings:• CONTIKI ECM – Contract manager’s workbench• CONTIKI CCS – Collaboration portal for contributors,

approvers and stakeholders• CONTIKI Sourcing – Integrated tendering portal for

suppliers• CONTIKI eContracting- Integrated contract work-

space with your counterparts• CONTIKI Achilles Interface – transfer of bidder lists to

CONTIKI• CONTIKI ERP Interface – Framework for integrating

with SAP and other.

SERVICESProfessional services offerings to clients globally:• Implementation services• System integration• 24x7 Technical support • On-site Classroom training • Best Practices workshops

REFERENCES A selection only, please contact CMA Contiki for a full list of references.• Total E&P• Statoil• Gassco• Centrica• Gdf Suez• Wintershall• RWE-Dea• Halliburton• Fabricom• Aker Solutions

Contact person: Christian Hjorth-JohansenTitle: VP SalesE-mail address: [email protected] Company website: www.cmacontiki.com CMA CONTIKI AS

16




ComputIT is a specialist company working world wide with environmental and reactive flows. Our focus is on CFD-based turbulent flow and combustion using our software KAMELEON FIREEX KFX® for both analysis and design.

Our aim is to improve safety in the petroleum industry, to reduce negative impacts on the environment from oil and gas activity, and to contribute to cost savings through use of advanced and accurate methods for design.

PRODUCTSKAMELEON FIREEX KFX® is probably the most advanced industrialized CFD software for fire, gas dispersion and flare simulation and is gradually becom-ing an industry standard. Many oil and gas companies, engineering companies, risk management companies, as well as universities, are KFX™ users. KFX™ is com-mercialized by ComputIT.

SERVICESComputIT offers consultancy services in the area of fire safety, combustion, environment and flares for all kinds

of oil and gas platforms, FPSO/FLNGs, and onshore process plants: Fire and smoke studies• Fire safety design• LNG dispersion and fires• Structural fire response analysis and optimum design

of passive fire protection for facility integrity• Analysis of active fire protection systems for fire

mitigation by deluge, mist, monitors etc• Combustion technology (burners/flare tips) for

optimum and environmentally friendly design• Aerodynamics and marine hydrodynamics

REFERENCESStatoil, Total, Eni, ConocoPhillips, Gassco, BP, Aker Solutions, MMI, DNV, Lloyds Register, Safetec/ABS, Lilleaker, GdF Suez, Aibel, KBR, ERM, Marex, Technip, Genesis, Sinopec, Hyundai, Samsung ++

Contact person: Trond EvangerTitle: Managing Director / CEOE-mail address: [email protected] website: www.computit.no

COMPUTATIONALINDUSTRY TECHNOLOGIES AS

ComputIT

17




Delta-p AS is a Norwegian OEM supplier of all kinds of pumps and pump packages for the oil and gas industry.

Our main features is to deliver customized rotating equipment fully tested according to customers’ specifications.

PRODUCTS• Miscellaneous Pump Packages• Crude oil and Condensate Pumps• Wellhead and Topside High pressure injection Pump

Packages (MEG/Methanol) • High Pressure MUD Injection Pumps• Sampling Systems for oil export metering.

• SW Booster and Water Injection Pumps• Process pumps for all type of applications.

SERVICESAftermarket department that will support spare parts and service / overhaul of equipment

Service technicians with offshore certificate and per-sonnel with OLF certificates. We can also offer support for installation activities on platforms.

REFERENCES Ekofisk LQ Conoco Phillips Hypochlorite injection skids w tank

in TitaniumDifferent Fields IRAQ, Statoil Crude Oil samplingBWO Athena BWO Produced water booster pumpGudrun Statoil Misc Pump package Ekofisk 2/4Z Conoco Phillips HP MUD Injection pump and KO Flare

pumpEkofisk 2/4L Conoco Phillips Utility pumps for LQ platformOrmen Lange Shell Norge Condensate pumpsÅsgard A/Statfjord C Statoil Cooling medium skid (Titanium)Troll A Statoil| Seawater PumpsEdvard Grieg Lundin Misc pump packageEdvard Grieg Lundin SRU pumps Alve/ Norne Statoil High Pressure MEG injection pump

packageKollsnes Statoil MEG Export injection pump packageSMART 1 FPSO Hot Oil Circulation pumpSMART 1 FPSO Chemical injection skidSMART 1 FPSO High pressure Methanol Injection

skidCidade Santos Petrobras FPSO SRU PumpsGhana FPSO SRU PumpsAngola Total Angola Diaphragm pump skid

And other references list can be provided

Contact person: Inger Lise SandbeckTitle: Business/Sales ManagerE-mail address: [email protected] Company website: www.delta-p.no

DELTA-PPUMPE OG KOMPRESSORSYSTEMER AS

18




DNV GL is an independent foundation with the purpose of safeguarding life, property, and the environment. Our core competence is identifying, assessing, and advising on how to manage risk. Whether we classify an FPSO, certify an automotive company’s management system, or advise on how to best maintain an aging oil platform, our focus is to safely and responsibly improve business performance.

MANAGING RISK As a leading international provider of services for man-aging risk, the point of managing risk is not necessarily to eliminate risk, but to have an overview of the most critical risks and manage them professionally. DNV GL’s technology understanding blended with competency within risk management has been used to assess, evaluate and manage the risks involved in numerous high-profile projects around the world.

AN INTERNATIONAL PARTNERHeadquartered in Oslo, Norway, DNV GL has worked internationally since 1867 and has established approxi-mately 300 offices in 100 countries. As a knowledge-based company, our prime assets are the creativity, knowledge, and expertise of our 9,000 employees from more then 85 different nations. While many of our services, such as management system certification and corporate responsibility, can be applied successfully in any industry, our main focus industries are: • Maritime• Oil, gas and energy

PRODUCTS • Classification• Risk and reliability/vulnerability analysis• Evacuation and emergency preparedness• Working environment services• Technical Analysis• Shelf state regulatory compliance services• Quality system certification• Marine warranty services

REFERENCES• Classification of around 35% of the world’s FPSOs• Verification services• Structural & Hydrodynamics• Stability• Subsea installations• Risk analysis• Enterprise risk management•

Contact person: Kenneth VareideTitle: Director of OperationsE-mail address: [email protected] website: www.dnv.no DNV GL

19




Dresser-Rand is among the largest global suppliers of custom-engineered rotating equipment solutions for long-life, critical applications in the oil, gas, chemical, petrochemical, process, power, military, and other industries worldwide, including the environmental market space within energy infrastructure.

These products—centrifugal and reciprocating gas compressors, gas and steam turbines, gas expanders, gas and diesel engines, and associated control panels—are used in oil and gas production, high-pressure field injection and oil recovery, gas liquefaction, gas trans-mission, refinery processes, natural gas processing, petrochemical production, general industry (including paper, steel, sugar, distributed power), and U.S. Navy applications.

Our custom-engineered products are also used in other advanced applications in the environmental markets we serve and use renewable energy sources, reduce carbon footprint and recover and/or increase energy efficiency. Dresser-Rand’s worldwide client base consists of oil and gas producers and distributors, state-owned oil and gas companies, and chemical and industrial companies. The company operates manufacturing facilities in the United States, France, United Kingdom, Spain, Germany, Norway, and India, and maintains a network of 49 service and support centres, including six engineering and R&D centres, covering more than 150 countries. Dresser-Rand has principal offices in Paris and Houston.

We design, manufacture and market highly engineered rotating equipment and provide services to the world-wide oil, gas, petrochemical, power generation, environ-mental solutions and industrial process industries. We have two reportable segments based on the demand for energy infrastructure and the associated products and

services required. New units are predominately highly engineered solutions to new requests from clients. New units also include standardized equipment such as engines and single stage steam turbines. The segment includes engineering, manufacturing, packaging, testing, sales and administrative support.

PRODUCTS• DATUM® centrifugal compressors • Diesel & gas engines• Synchrony® magnetic bearings• Gas Turbines• Steam Turbines• HydroAir™ OWC power plants• Reciprocating Compressors• Expanders• Control systems

SERVICESAftermarket parts and services supports solutions for the existing population of installed equipment and the operation and maintenance of several types of energy plants. The segment includes engineering, manufactur-ing, installation, commissioning, start-up and other field services, repairs, overhauls, refurbishment, sales and administrative support. From our office in Kongsberg we can support and monitor your plant from our remote monitoring control room.

REFERENCES Please contact Dresser-Rand for references.

Contact person: Kjetil GundersenTitle: Project Development ManagerE-mail address: [email protected] Company website: www.dresser-rand.com DRESSER-RAND

20




Energy Piping AS is one of the market leaders in the piping business in Norway. Our core market is oil & gas and our stock of over 6000 finished products and materials provides a comprehensive assortment of pipe, fittings and flanges.

Energy Piping AS has extensive experience in supplying to international customers world-wide. Continuous focus on customer satisfaction through knowledge, technical competence and a comprehensive stock is the basis for our business.

PRODUCTSGenerics in stock:• Pipe, fittings and flanges from 1/2”-24”• Mechanical joints• Compact flanges• Special Items

Material qualities in stock:• 22Cr Duplex (UNS S31803/S32205)• 25Cr Duplex (UNS S32750/S32760)• 6Mo (UNS S31254/N08926)• 316/316L Stainless steel• Titanium Gr. 2• Carbon steel – ASTM A106 Gr.B/A234 WPB/A105 – ASTM A333 Gr.6/A420 WPL6/A350 LF2 – ISO3183 L360(API 5L Gr. X52)/ASTM• A860 WPHY52/

Selection of subsea products:• Seamless pipe by hot extrusion• ID Pipe from forging• Spool pieces• Barred Tees• 3D/5D Bends• Fabricated Manifolds and HP Flow lines• Special Connectors and Flanges• Pig launchers and Receivers• Clad pipe, fittings and flanges

Selection of special products/items:• Techlok Clamp Connectors

• Pipe support systems• GRE & GRP items• Strainers• Filtration units• Flame arresters• Flexible hoses• Hose assemblies and couplings• 3D/5D Bends• Hose reels• Flexible joints/Bellows• Prefabricated spools• Manifolds• Non-standard flanges & fittings, and products

which require special engineering, testing and documentation.

SERVICESEnergy Piping AS holds one of Northern Europe’s largest stocks in ASTM piping products including pipe, fittings, flanges, compact flanges and mechanical joints. Our stock range from 1/2” an up to 24” in all common material grades used for the oil & gas industry. We have semi-finished compact flanges and mechanical joints which can be machined locally to customer specification for minimum delivery time.

Our technical department qualify steel mills of pipe, fitting and flange manufacturers to Norsok M-650. The stock material are manufactured and certified to Energy Piping AS’ own specification EP-3000 which complies with Norsok M-630 and Statoil TR2000. Our Technical Managers are members of, and participate actively in the Norsok M-650 and M-630 committees.

Energy Piping AS, with its considerable product competence and experience also support customers with calculations and finding the best technical and cost effective solutions for each application.

REFERENCESEdvard Grieg Kværner Pipes, fittings & flanges 6MO &

TitaniumQuad 204 FPSO Hyunday Heavy Industries Super duplex welded pipesValemon Samsung H.I. Pipes & fittings, Duplex, Super

Duplex, 6MO & TitaniumKristin LPP Aker Solutions 22Cr & 25Cr Duplex, 6MO, Super

AustinittEldfisk 2/7S Kværner All material gradesEkofisk Zulu Platform Aker Solutions TitaniumEkofisk Hotel Accomodation SMOE - Singapore All material gradesÅsgard A - Swivel Grenland Group DuplexGullfaks Water Injection Grenland Group DuplexMongstad DCR M/W Kellogg Carbon Steel material

Contact person: Steinar LeaTitle: Director Sales & MarketingE-mail address: [email protected] website: www.energypiping.no

ENERGY PIPING AS

21




Eureka Pumps AS is a pump supplier with more than 35 years of experience in the oil and gas industry, offering a range of pumps and generator sets that covers a majority of applications. Eureka Pumps supplies to new builds and operates advanced maintenance and after market. The company also offers services for upgrading, modification, equipment testing, and installation.

Eureka Pumps is a market leader among companies operating on the Norwegian Continental shelf, and it is also present in the international markets with selected applications, based on own technology.

Eureka Pumps main office is in Oslo (Lysaker), Norway, and has branch offices at strategic locations along the Norwegian coast. Eureka Pumps also has offices in Houston and Perth.

PRODUCTS Main applications:• Fire Water Pump Systems• Crude Oil Export Pumps• Generator sets• Process & Utlility Pumps• Seawater Lift Pumps• Produced Water Pumps • Cargo Pump Systems• Water Injection Pumps

REFERENCES • Skarv Idun

4 off Fire Water Pump Packages with each dedicated 2.8 MW generator set. Client:: Samsung Heavy Industries. Operator: BP Norway.

• Valhall Re-development 3 off Line Shaft SWL Pumps. Client: Mustang Engineering. Operator: BP Norway.

• Ekofisk 2/4L 2 off Fire Water Pump Packages with each dedicated 2.8 MW generator set. 2 off Sea Water Pumps with 325 kW electric submers-ible motors.

• Clair Ridge 3 off Fire Water Pump Packages with each dedicated 1,6 MW lineshaft with diesel driver. Client: Amec. Operator: BP.

• Hebron 4 off Fire Water Pump Packages with each dedicated 2,2 MW generator sets. 3 off Sea Water Lift Pumps with 1 MW electric sub-mersible motors. 7 off Cargo Pumps with 780 kW electric motor. 2 off Sea Water Essential Pumps with 300 kW electric submersible motors. Client: Worley Parsons. Operator: Exxon Mobile.

• Edvard Grieg 4 off Fire Water Pump Packages with each dedicated 2,2 MW generator set. 2 off Sea Water Lift Pumps with 1,5 MW electric submersible motors. 1 off Sea Water Lift Pump with 200 kW electric submersible motors. Client: Kværner Stord. Operator: Lundin Norge AS.

• Eldfisk 3 off Lineshaft Fire Water Pump packages with each dedicated 2,1 MW diesel driver. 2 off Sea Water Lift Pumps with 1,5 MW electric submersible motors.

Contact person: Tom GustavsenTitle: Director Sales & MarketingE-mail address: [email protected] website: www.eureka.no EUREKA PUMPS AS

22



ENGINEERING & TECHNICAL SERVICES TOPSIDES ENGINEERINGMARINE ENGINEERING & MOORING DESIGNTECHNICAL & PRODUCTION SERVICESADMINISTRATION & IT SERVICES

FMC Technologies Measurement Solutions is the market leader in the design, manufacture and supply of measurement products for the worldwide oil and gas industries.

FMC engineers have developed solutions that overcome the oil and gas industry’s most difficult measurement obstacles. Through a deep understanding of the indus-try, unmatched product and system knowledge and the highest standards for performance, FMC Technologies Measurement Solutions puts the most daunting measurement challenges within reach. With over 2,000 installed projects in over 100 countries worldwide, FMC Technologies has unparalleled expertise in designing and constructing diverse liquid and gas systems that meet the needs of its customers.Our engineers and project management staff are experts, many with decades of experience in the mea-surement industry, and offer complete support at every phase of the project’s development. Whether a project necessitates language translations, compliance with non-standard regional practices or project commission-ing in remote locations, FMC’s project teams have the know-how to solve any measurement system challenge.

PRODUCTSFMC provides total Measurement solutions, including:• Inline LNG flow measurement• Gas export and gas re-injection • On line Gas analysis

• Fuel gas• Flare gas• Metering Control Systems• Continuous and batch liquid metering. Export

(Custody transfer) metering on liquid (Crude, condensate)

SERVICESAs the global leader in custody transfer flow measure-ment, FMC Technologies now offers our consolidated Measurement CARE program: a comprehensive service that can be tailored to fit our customer’s exact needs. Measurement CARE helps to ensure the accuracy, reli-ability and regulatory compliance of all measurement systems, regardless of manufacturer, throughout the equipments’ life cycle.

REFERENCESFMC Technologies Measurement Solutions has supplied more than 2,000 Measurement Systems installed in over 140 Countries and designed to all International & Domestic Measurement Requirements.

Please contact us if you would like more information about these projects.

Contact person: Flemming SørensenTitle: Europe Sales ManagerE-mail address: [email protected] website: www.fmctechnologies.com/measurementSolutions

FMC TECHNOLOGIES

23




FORCE Technology is among the leading technological consulting and service companies in Scandinavia and internationally. We provides our technology and services globally.

FORCE Technology is organized as a neutral self-owning foundation where our profit must be reinvested in research and technology development. Since our origin as The Danish Welding institute in 1939, FORCE has developed into one of northern Europe’s leading research and technology hubs.FORCE is present in Norway, Denmark, Sweden, USA, Singapore, China and Russia and employees more than 1300 skilled people.

FORCE Technology’s operations within Oil & Gas contain several specialized technologies that focus primarily on servicing the offshore industry.

FORCE Technology’s mission is to safeguard lives and assets in a sustainable manner and protect values that create values.

PRODUCTS• Advanced Sensor Technology.• Fatigue Monitoring Systems.• Online Riser & Pipeline Monitoring Systems• CP-Modeling Systems.• Advanced Inspection and Verification Products &

Systems.• In-house and customized SW analysis systems.• Maritime Simulator Systems

SERVICESFORCE Technology can participate and provide technol-ogy and services from the very early feasibility study phase and all the way to the end of life of your offshore installation.Our highly skilled management, engineers and service teams provides the following applicable disciplines:

• Structural design, verification, analysis, modeling and

calculation services• Material and corrosion management• Cathodic protection design, verification, manage-

ment & services• Inspection, onshore, offshore and world class subsea

inspection and verification. • Historical and predictive modeling of fatigue pro-

cesses/analyzing-intelligence services. • Maintenance management• Pipeline integrity management and services.• Consulting services within asset integrity.• Hydro- and aerodynamic optimization of ships’

performance• Simulator systems (SimFlex)• Onboard systems (itinerary planning, fuel optimiza-

tion etc.)• Harbor layout• Human factors (HF)• Wind loads and dynamics of buildings and bridges.• Air pollution and emission reduction• CO2 statements and reduction studies.• Verification and calibration of equipment and refer-

ences within volume, density, flow, temperature, force, pressure and torque

• Polymers – consultancy, analysis and characterization• Customs analyses• Surface characterization and analyses• Metals analyses• Trace elements analyses• Destructive testing & root cause failure analyses• Training and certification

REFERENCES FORCE Technology has decades of proven track record of global supplies of both products and services to all major operators. Please contact us for further and detailed information of your particular interest.

Contact person: Bjarne T. JensenTitle: Sales and Marketing ManagerE-mail address: [email protected] website: www.force.no

Force Technology Norway as

24




FRANK MOHN ASOIL & GAS

Contact person: Frode HjelmelandTitle: Sales ManagerE-mail address: [email protected] Company website: www

Frank Mohn Flatøy AS is the production facility for the oil & gas and environmental activities within the Frank Mohn Group of companies.

In the international oil and gas industry we are recog-nized as a leading designer, manufacturer and supplier of complete pumping systems for both onshore and offshore applications, and for production of offshore oil recovery systems.

All our products are factory tested and delivered to our customers ready for operation in the field.

Frank Mohn Oil & Gas is dedicated to providing our customers with world class reliable pumping systems engineered to meet their needs, both offshore and onshore. When your business needs a lift, talk to Frank Mohn Oil & Gas.

PRODUCTSOffshore and onshore pumping systems: • Electric submersible pumps, for sea water lift, ballast,

fire water service, crude cavern etc.• Fire Water Pumps, hydraulic and electrical driven• Booster integrated Water Injection Pumps

SERVICES• Aftermarket services• Engineering support

REFERENCES On Floating production systems• 178 Fire water pump systems• 160 Electric submersible pumps• 43 Water injection pumps

25




Freudenberg Oil & Gas Technologies (FO&GT) is a global solutions provider of innovative seal solu-tions and differentiated seal products to the global oil and gas industry. The company is focused on the exploration and production (upstream) segment, and acquired Vector Technology Group in January 2013. Our 620 associates serve a wide range of customers including oil and gas producing companies, original equipment manufacturers (OEMs) and engineering and service companies that provide technologies, equipment and services for producing oil and gas from land based and offshore platforms throughout the world.

The Vector products and sealing technology are used in some of the most demanding applications in oil and gas, including: offshore oil & gas platforms, FPSOs, refineries, riser and swivel applications, flowlines and subsea installations, and chemical and petrochemical plants. Featured products are the SPO Compact Flange, the TECHLOK Clamp Connector and the ROV-operated OPTIMA Subsea Connector. Freudenberg Oil & Gas Technologies has locations in Australia, Brazil, Canada, Malaysia, Norway, Singapore, the UK, the United Arab Emirates, and the US.

A BROAD INDUSTRY KNOWLEDGEFreudenberg Oil & Gas Technologies’ high level of technical expertise, broad industry knowledge and problem solving capabilities have earned industry wide recognition, helping to build close working relationships with customers whilst delivering high quality products and customised solutions on-time.In-house capabilities include; raw material stock, manufacturing facilities, coating, NDT and metrology equipment, pressure and hydro testing as well as com-plete pressure, bending and torsion testing facilities. In combination with an efficient supply chain FO&GT is able to deliver both flexible and fast track deliveries in addition to executing larger projects. Its products cover pressure classes up to 15,000 psi and have a proven track record within High Pressure / High Temperature and harsh environment applications where fatigue, high bending and stress loads are of primary importance.

COMMITMENT TO CONTINUOUS IMPROVEMENTFreudenberg Oil & Gas Technologies is committed to designing and manufacturing the safest and most efficient sealing and pressure containment technology in the market. Setting HSEQ as the highest priority throughout a project, core focus is on product quality and development, the recruitment and retention of highly trained and competent personnel, continuous improvement and product installation support. In addi-tion to its commitment to safety, reliability and techno-logical development, FO&GT continuously aims to excel in order to meet or surpass its client’s expectations.

PRODUCT SUPPORTGood quality products need proper support. Accordingly we offer the following services :• Training courses including : Introduction, Handling &• Protection, Assembly/Disassembly, Bolting and

Damage assessment• Dimensional Inspection at customer’s locations or at

FO&GT premises.• Leak Investigation: FO&GT can help by giving an

assessment of leaks, and solving the leak issues.• Damage assessment & repair management• Leak Reduction Initiative : Supervising during

Fabrication, Construction and Commissioning with respect to leak reduction. Reducing leaks and creat-ing significant time saving, due to the reduction of repairs and modifications.

Freudenberg Oil & Gas Technologies

Contact person: Tony Andre HåvelsrudTitle: Managing Director, Vector ASE-mail address: [email protected] website: www.vectortg.com

26

Contact person: Erik AadlandTitle: Marketing FLAX SoftwareE-mail address: [email protected] website: www.gexcon.com




GEXCON AS

GexCon AS is a world-leading company in the field of safety and risk management and advanced dispersion, explosion and fire modelling. GexCon’s software FLACS has become an industry stan-dard, and is now the world #1 explosion simulator.

PRODUCTS:• FLACS - Dispersion, Explosion and Fire simulator

FLACS is one of the best validated tools for modeling flammable and toxic releases in the technical safety context. FLACS is a comprehensive, yet easy to use, software tool for safety modelling consequences in full 3D. It is used extensively in the Oil and Gas and Process industries.

SERVICES:• Safety consultancy• Safety training• Laboratories

Our Consultancy teams will help you identify all your hazards, understand your risks and contribute to improving your company’s safety performance. Process/Technical Safety and Risk Management• Dispersion Modelling• Explosion Modelling• Fire Modelling• Gas and Dust Explosion Safety Regulatory

Compliance• Occupational Health and Safety• Incident Investigation, litigation• Courses and training

At GexCon, all explosion tests and equipment testing, together with our experimental research is performed at the Laboratories Department in Bergen, Norway. Our test facilities include a well-equipped test laboratory and a large-scale test site.• Certification of Equipment Intended for Use in

Explosive Atmospheres – ATEX• Tests Related to Certification and Classification• Gas Explosion Mitigation Systems Testing, Design and

Certification and Dust Explosion Properties

• Specialised Testing and Research

REFERENCES:FLACS users: Statoil, BP, Total Petrochemical, ExxonMobil, GDF Suez, Petrobras, CNCP, Sinopec, PDVSA, FERC, HSL, Sandia, IRSN, EDF, DNV, Safetec, Lloyds Register, ABS, Baker Risk, ERM, WorleyParsons, Atkins, BMT, MMI, Saipem, CB&I, HQC, Technip

LNG references from GexCon Consulting:Explosion risk, Vessel layout and optimum safety design, safety gaps, risk calculation, gas detection optimiza-tion, spill consequence etc• • Snøhvit LNG, Masala FLNG, Petronas FLNG2, ,

#1 Generic FLNG (Shell FLNG), #2 Generic FLNG (Shell FLNG), #3 Generic FLNG (US oil company), #4 Generic FLNG (US oil company), #5 Generic FLNG (Japanese engineering company), Livorno LNG FRSU, Facility siting studies (18 of a present total 21 US terminals)

Offshore vessels, safety studiesMany 100s of studies, using FLACS doing simulations and risk calculation. Also an increasing number of Onshore safety studies.

Incident investigation, litigation: Piper Alpha, Buncefield, TW800 Plane crash, Danvers Explosion, West – Texas Explosion, and 100s of more.

Experimental work/Laboratory testing:More than 30 years of experience, 100s of projects – both research/FLACS validation, but also contract work related to Explosion vent panels, Explosion drag load on PFP, explosion barriers, equipment testing and certifica-tion etc. Customers: Total, Statoil, engineering compa-nies and manufacturer of explosion proof equipment.

27

mailto:[email protected]




Glamox Global Marine & Offshore (GMO) is the world leading suppliers of light and lighting solu-tions to the global marine and offshore markets. The company is involved in large installation projects, offshore maintenance and modifications.

The company’s business area is represented globally through its agents and distributors, and it has own sales units in Norway, Germany, Finland, Singapore, China, USA, Korea and Canada. The Group owns a range of quality lighting brands including Glamox, Aqua Signal, Luxo, Høvik Lys and Norselight. Glamox GMO head office is located in Oslo, Norway.

PRODUCTSExterior lighting (topside & hull part)• Explosion proof and safe zone• Floodlight and fluorescent type• Standard & Emergency light

Interior & accommodation• Control rooms & technical rooms • Accommodation & Galley/Mess & Public

rooms • Explosion proof and safe zone

Designated areas• Searchlights• Navigation Lights• Helideck lights• Signal lights

SERVICES Complete package supplier for lighting and related equipment for Marine & OffshoreLight calculation programme in Optiwin 3D (three dimensional system)World wide network for after sales & servicesLocal agents and/or distributors world wide.

TECHNOLOGYGlamox has over recent years invested heavily in the development of LED lighting. We see the small LED as a new light source that may change the world of lighting. The LED technology is in rapid development and LED has many applications. Because of the robustness of the diodes, LED is fast becoming the preferred light source for demanding use on board ships, rigs and moving machinery. LED benefits among others;• - Long Lifetime• - Energy savings• - Maintenance friendly• - Installation friendly• - Efficient in cold temperatures

Contact person: Ola WiikTitle: Vice President Oil & GasE-mail address: [email protected] Company website: www.glamox.com/gmo

Glamox Global Marine & Offshore

28




GMC HVAC has been a major HVAC supplier to the Norwegian Oil & Gas market since 1988. The company is involved in large installation projects, offshore maintenance and modifications, and the supply of ductwork and equipment.

GMC HVAC is currently employing a total of 87 skilled people with 16 experienced HVAC engineers, 60 techni-cians/ operators whereas 23 have offshore certificates and experience. Our document control centre currently engages 5 persons.

Our goal is to be the preferred supplier of HVAC ser-vices for new and existing installations on the offshore market.

The culture of the company is characterized by continual work for improvement, achieved through coordination of expectations and requirements from customers, employees, authorities and owners.

GMC HVAC is part of the GMC Group consisting of 9 companies offering services and products to the oil and gas-, and shipping industry. The group are currently employing approximately 275 persons.

When in need of a partner or supplier with the highest level of experience in providing HVAC solutions to the oil and gas industry, GMC HVAC is an excellent choice.

Our Quality System is certified according to NS-EN ISO 9001:2008 manufacturing /supplying the following products/ services: Engineering and Design, Equipment delivery, Installation, Mechanical Completion, and Commissioning of HVAC systems.

Our HSE / Quality policy shall be carried out by having focus on safety, quality and communication with

customer and the ability to deliver. Achilles registration no. 950093617 Id. 15391

GMC HVAC delivers a full range of HVAC, Cooling and Refrigeration equipment, and is an expert on bespoke products for harsh environments, i.e. our own in-house developed air conditioning systems, Simvent, delivered to drilling rigs worldwide. We have our own Refrigerant Department currently consisting of two engineers and four technicians.

In our workshop, we have specialized in stainless steel, and manufacture welded ductwork and plate construc-tions according to our customers’ specifications.Our duct system, Simduct® is manufactured in accor-dance to NORSOK - ISO15138, and can many times be an excellent alternative, saving both weight (approx.. 70% ) and installation time (approx..35 %) compared to conventional, welded ductwork. Life Cycle Cost (LCC) is zero compared to conventional duct systems.

GMC offers a full range of HVAC related services; our scope of delivery can include engineering, design, pro-curement, equipment delivery and installation of new HVAC systems, or maintenance and troubleshooting, repairs and modifications on existing HVAC installa-tions, cooling and refrigeration plants.

An important aspect of our contracts

services, equipment and systems for topsides & floating units€¦ · • the “spar” platform...

Documents