service parts taut installation instructions...
TRANSCRIPT
1287539-2A-C 1
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTE:1. Inspect the supply pipes for damage and leakage. Replace and maintain as necessary2. Flush the water supply pipes thoroughly to remove any debris.3. If possible, install this faucet before installing sink.
HANDLE OPERATION Open the handle gently. Turn clockwise for cold water, turn counter-clockwise for hot water.
STANDARD APPLICABLESpecial model meets or exceeds the following at date of manufacture: TIS
INSTALLATION INSTRUCTIONS
74053T-4 Tube Spout Kitchen Faucet21368T-4 Tube Spout Kitchen Faucet21369T-4 Tube Spout Kitchen Faucet21370T-4 Tube Spout Kitchen Faucet
74053T-4 Tube Spout Kitchen Faucet21368T-4 Tube Spout Kitchen Faucet21369T-4 Tube Spout Kitchen Faucet21370T-4 Tube Spout Kitchen Faucet
TAUT
ROUGH-IN DIMENSIONS
182
323
232
Ø33~Ø36
22°
G1/2˝
40 M
ax
74053T-4
115
Ø45
58
138
70
560
1287539-2A-C 4
TAUTSERVICE PARTS
**Color code must be specified when ordering.NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
1068126
1209778**1209777
1292054
833438
3008523
833438
3008523
74053T-4/21369T-4:1287547**
21368T-4/21370T-4:1309847**
836549
1239358
1239354**
1080817
1239352
74053T-4/21368T-4:1243529**
1146748
1073951
1243532**
1031238
3002868
1228834
21369T-4/21370T-4:1239347**
1243532**
1031238
3002868
1287539-2A-C 2
1287539-2A-C 3
INSTALLATION
Install the mounting stud(1) into the faucet body base(2). Insert the washer (3) under the body assembly. Insert the flexible supply hoses(4) into the sink.
From underside of the sink, place the washers(5, rubber washer is on the top) and the nut(6) onto mounting stud. Position the faucet so that the handle is on the right side. Tighten the nut by tool(7) to secure the faucet.
Attach the hoses to water supplies. The hose with "COLD" label is for cold water.
INSTALLATION CHECKOUT
Ensure that all connections tightened and the handle is in the off position.
Open the drain. Turn on main water supply and check for leaks. Repair as required.
Remove the aerator(8). Turn the faucet handle on. Run hot and cold water through the spout for about one minute to remove any debris. Remove debris from the aerator. Shut off the faucet and reinstall the aerator.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953
8
5
6
4
132
7
21368T-4
21369T-4
21370T-4
87
58
5856
0
560
232
323
Ø33~Ø36
80246
322
Ø33~Ø36
182 72
G1/2˝
5856
0
G1/2˝
G1/2˝
87
40 M
ax40
Max
22°
70
246
322
17822°
17822°
72
40 M
ax