service bodies5) truck... · 14 gauge two-sided a40 galvanneal steel. compartment top and back are...

Service Bodies

Vendor Name: Bert's Truck Equipment, Inc.Contact Person: Jim McLaughlinStreet Address: 3804 Highway 75 NorthP.O. Box: 336City, State, Zip Moorhead, MN 56561-0336Phone #: 218-233-8681Toll Free #: 800-232-3787Fax #: 218-233-9548Email Address: [email protected]: www.bertsonline.com

Version of Excel used: 2013

2.0 UTILITY /SERVICE BODYMake

WarrantyDate & I.D. of Price List

Discount to be applied to Price List* (see note below) 0.00%Installation of Utility/Service Body as per MnDOT spec 1.0 See Attached Price Schedule

Price of FMVSS 108 lighting package See Attached Price SchedulePrice of ICC bumper under ride protection See Attached Price Schedule

Installation of ICC bumper under the protection See Attached Price Schedule

Delivery

Delivery Starting Point AddressPrice per loaded mile for delivery $2.25

Delivery Time Frame in calendar days ARO 120 +/-

Shop Rate per HourShop Rate for Mechanical work per hour 110.00$

Body Shop Rate per hour 110.00$

*Note: The "Discount to be Applied to Price List" must be a

Moorhead, MN 56560 SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED

Knapheide (various models)6 Year Limited Warranty10/17/2018

STATE OF MINNESOTAPRICING 10-17-18

Bert's Truck Equipment of Moorhead

1.0 Knapheide Utility/Service Bodies to fit 56”, 60”, 84” & 108” CA Chassis'Standard Features:Body Shell14 gauge two-sided A40 galvanneal steel. Compartment top and back are onepiece seamless design. All doors, door openings, drip rails, and other exposedsteel edges to be hemmed for strength, safety and resistance to corrosion.Floor12 gauge treadplate with 1 3/8” return flange on each side. Side compartment back panel overlaps and interlocks with floor flange, providing support for weight of side compartment.Understructure50,000 yield 11 gauge high strength steel cross sillsTailgate14 gauge two-sided A40 galvanneal steel double panel construction. Slam lockable styleDoors20 gauge two-sided A40 galvanneal steel double panel doors with hat section reinforcements.HingesCorrosion resistant all stainless steel continuous hinges provide full length support for the doors and pry-proof security with a built-in weather shield. Hinge to be spot welded to the door frame supported with a six year warranty.Rotary LatchesAutomotive rotary latches rivet-less design Rotary latch is slam-latchableLatching cam to be elongated to allow the latch to move vertically relative to the lockstrike to prevent torsional damage.Door StrikersAdjustable striker affixed to door frame with screws. (Door SealsAutomotive “bulb type” neoprene door seals to be installed by the manufacturer of the body on all door frames.Door RetainerDouble spring over center door retainers on all vertical doors, retains doors in positive open or closed position. Shelving18 gauge bright spangled galvanized shelves with hemmed dividers on 4” centers. Minimum 250 lbs. capacity rated.

Exterior Prime PaintBody is completely immersed in electrodeposition gray epoxy prime paint featuring a zinc phosphate pre-coat and seal for additional corrosion protection. Prime paint is oven cured to provide a hard durable finish.Interior Paint Interior painted mid-gloss, mar resistant, light gray finish.Interior painted mid-gloss, mar resistant, light gray finish.UndercoatingBody is completely undercoated by the manufacturer of the body using minimum five (5) mils of water base acrylic.

WarrantyThe following items to be covered by minimum six (6) year limited warranty to first owner/user of record.No Rust-Thru GuaranNo Rust-Thru GuaranteeContinuous Door Hinge – Guaranteed not to fail to operate or come off product.Latches and Lock Cylinders – Guarantee against failure.Shelves – Guaranteed not to fail in bending under maximum 250lb. rated load.

Base Price includes, Standard Body as provided by Knapheide with Standard Shelving Package. All prices are FOB Moorhead and are Load Out, Prime paintedNote: Chassis Specific Mounting Kit not included in base price!

96” Bodies to fit Single Wheel 56” CA Chassis1.0-1 Knapheide, 596, 696, 796, Standard Models 3,810.00$

(78” wide, 97 ¼” long, 40” high, 49” cargo area)1.0-2 Low profile model (LPJ) 37.5” 3,810.00$

1.0-3 Knapheide 596F, 696F, 796F (Flip top models) 4,571.00$ (78” wide, 971/4” long, 37.5” high, 49” cargo area)

1.0-4 Full Height model (F40J) 4,667.00$

108” Bodies to fit 60” CA Single Wheel Chassis1.0-5 Knapheide, 5108, 6108, 7108, Standard Models 4,422.00$

(78” wide, 109 ¼” long, 40” high, 49” cargo area)1.0-6 Low profile model (LPJ) 37.5” -$

1.0-7 Knapheide 5108F, 6108F, 7108F (Flip top models) 5,233.00$ (78” wide, 1091/4” long, 37.5” high, 49” cargo area)

108” Bodies to fit 60” CA Dual Wheel Chassis1.0-8 Knapheide, 5108D, 6108D, 7108D, Standard Models 4,717.00$

(89” wide, 109 ¼” long, 40” high, 54” cargo area)

1.0-9 Knapheide, 5108D54, 6108D54, 7108D54, Standard Models 4,935.00$ (94” wide, 109 ¼” long, 40” high, 54” cargo area)

1.0-10 Low profile model (LPJ) 37.5” 4,935.00$

1.0-11 Knapheide 5108D54FJ, 6108D54FJ, 7108D54FJ (Flip top models) 5,778.00$ (94” wide, 1091/4” long, 37.5” high, 54” cargo area)

132” Bodies to fit 84” CA Dual Wheel Chassis1.0-12 Knapheide, 5132D54J, 6132D54J, 7132D54J, Standard Models 6,705.00$

(94” wide, 133 ¼” long, 40” high, 54” cargo area)Low profile model (LPJ) 37.5”

1.0-13 Knapheide 5132D54F, 6132D54F, 7132D54F (Flip top models) 7,666.00$ (94” wide, 133 ¼” long, 37.5” high, 54” cargo area)

1.0-14 157” Bodies to fit 108” CA Dual Wheel ChassisKnapheide, 6157D54, Standard Models 11,036.00$

(94” wide, 158 ¼” long, 40” high, 54” cargo area)

1.0-15 Chassis Specific Mounting Kit (includes light adaptors for current Model Years) 210.00$

Light Kits , Fuel Fill, and Bumper Options1.20 LED Surface Mount lights (new style) S/T/T and B/U light kit with strobe feature 210.00$ 1.21 LED S/M lights (new style) S/T/T & B/U light kit with strobe (+80" wide Body) 290.00$ 1.22 Light harness adaptors other than Ford and LED Flashers refer to Knap OF Non Contact Item1.23 Strobe light hook up kit wired to OEM upfitter switch 125.00$ 123A Ecco Front Strobe Kit With wiring kit, Installed 350.00$ 1.24 Aluminum Fuel Fill Cup and pre punched hole, for fuel or DEF Location 88.00$ 1.25 GM Fuel Fill Kit required for GM Chassis 56” CA with box removal 335.00$ 1.26 GM Fuel Fill Kit required for GM Chassis 60-84” CA 110.00$ 1.27 Ford Fuel Fill Kit 40/56" CA DRW Chassis 90.00$ 1.28 TFI Ford Fuel Fill Kit for Ford 56" CA Chassis 350.00$ 128A Fill neck KIT and fuel Cap (required on chassis that do not have Fuel Cap) 275.00$ 1.29 78” Standard Treadplate or Galvi-grip Step Bumper 285.00$ 1.30 78” Standard Treadplate or Galvi-grip with PHR 285.00$ 1.31 78” Standard Treadplate or Galvi-grip with BMR 354.00$ 1.32 94” Standard Treadplate or Galvi-grip Step Bumper 339.00$ 1.33 94” Standard Treadplate or Galvi-grip with PHR 354.00$ 1.34 94” Standard Treadplate or Galvi-grip with BMR 426.00$ 1.35 94” Standard Grip Strut Bumper with PHR 695.00$

Paint options for Knapheide Standard Service Bodies1.36 Knapheide "blended" White OEM Paint J-Series 96" Bodies 815.00$ 1.37 Knapheide "blended" White OEM Paint FJ-Series 96" Bodies 815.00$ 1.38 Knapheide "blended" White OEM Paint J-Series 108" Bodies 935.00$ 1.39 Knapheide "blended" White OEM Paint FJ-Series 108" Bodies 935.00$ 1.40 Knapheide "blended" White OEM Paint J-Series 132" Bodies 1,075.00$ 1.41 Knapheide "blended" White OEM Paint FJ-Series 132" Bodies 1,075.00$ 1.42 Knapheide "blended" White OEM Paint J-Series 157" Bodies 1,400.00$ 1.43 Knap Liner or paint Bumper add 175.00$

1.43A Knapheide 1848 package (in addition to factory paint charge) includes power locks, LED Compartment lights, Sortimo box package in Left Horizontal, Aluminum Rock Guards, and Aluminum tailgate trim

696 series Add 2,390.00$ 6108 Series Add 2,550.00$ 6132 Series Add 2,595.00$

1.43B Knapheide Pioneer Package (In addition to Factory paint Charge) includesMasterlock, Aluminum Trim package, Aluminum Rock guards

696 Series Add 1,130.00$ 6108 Series Add 1,410.00$

Berts painting1.44 Paint One Standard Color White X96J service bodies 1,210.00$ 1.45 Paint One Standard Color White X108J Service Bodies 1,210.00$

1.46 Paint One Standard Color White X132D54J Service Bodies 1,475.00$ 1.47 Paint One Standard color White 6157D54 Service Bodies 1,630.00$ 1.48 Adder for color other than white 325.00$ 1.49 Adder for BC/CC 700.00$ 1.50 Paint Cargo Area Black 395.00$

Line-x cargo Liner (includes bumper) in Cargo Area1.51 96" Bodies 775.00$ 1.52 108" Bodies 795.00$ 1.53 132" Bodies 875.00$ 1.54 157" Bodies 1,025.00$

1.55 Basic Installation of all Knapheide Service Bodies:(Includes installation of body, light kit, bumper and fuel fill) 805.00$

1.55-1 Installation of Knapheide Option fit items shipped loose from factory $ 110.00 P/hr(See Section 11.1 for Knapheide Option fit pricing)

1.55-2 Installation of OEM Supplied Backup Camera 110.00$ 1.55-3 Provided and install Standard Rostra OEM Compatable Camera 260.00$ 1.55-4 Provide and install HD Rostra OEM Compatable Camera 325.00$

Common Options For Knapheide utility bodies (some options may be required)1.56 Full Height Aluminum Rock Guards on front of body 155.00$ 1.57 Corner mounted Crane reinforcement up to #4000 cap crane 1,087.00$ 1.58 Torsion Box Floor 96" & 108" Bodies (includes Mounting Kit) 815.00$ 1.59 Torsion Box Floor 132" Bodies (Includes Mounting Kit) 1,124.00$ 1.60 Torsion Box Floor 157" Bodies (IncLudes Mounting Kit) 1,377.00$ 1.61 Double Overlapped Front Vertical Doors ILO standard 135.00$ 1.62 Double Overlapped Door on Horizontal ILO Standard 120.00$ 1.63 Tread Bright Aluminum Trim Package (Compartment Tops) 96” Series Bodies 525.00$ 1.64 Tread Bright Aluminum Trim Package (Compartment Tops) 108” Series Bodies 695.00$ 1.65 Tread Bright Aluminum Trim Package (Compartment Tops) 132” Series Bodies 795.00$ 1.66 Tread Bright Aluminum Trim Package (Compartment Tops) 157” Series Bodies 995.00$ 1.67 Standard Bottle gas retainer, installed 385.00$ 1.68 Drop well bottle gas retainer, installed 399.00$ 1.69 LED Compartment Lights (1-strip) per Compartment 100.00$ 1.70 Transverse Compartment open to Curbside Front Vertical Compartment 900.00$ 1.71 Transverse Compartment open to Both Front Verticals Compartments 975.00$ 1.72 Interior Rope lights per compartment (Continuious) 135.00$ 1.73 LED Gromet mounted Strobe Lights in Rear of Body 320.00$ 1.74 Mechanics Vice Bracket (standard) 150.00$ 1.75 Removable Mechanics Vice Bracket 225.00$ 175A Wilton Truck Vise, Installed 275.00$ 1.76 97 db back/up alarm installed 85.00$ 1.77 Variable db Back up Alarm, installed 135.00$ 1.78 White Noise back up alarm, installed 180.00$ 1.79A Hella LED Mini-Light bar, Installed on Pedistal 485.00$ 1.80 Samlex SSW-200012A Inverter 575.00$ 1.80A Samlex PST-200012 HD Inverter 930.00$ 180.B Remote kit for HD Samlex Inverter 85.00$ 1.81 400 amp fuse, cabling and installation of Inverter 625.00$

1.82 New Take off Pick-up box trade allowance (600.00)$ 1.83 Rear Window/cab Guard 525.00$ 1.84 Relocate OEM Backup camera 525.00$ 1.84A Golight 3004 LED spot light with wirekless control, Installed 675.00$ 1.84B Buyers LED Worklight installed, wired to upfitter switch 170.00$

Hitch Options1.85 Class IV Receiver Hitch 325.00$ 1.86 Buyers Class V Reciever Hitch Rated at 16000LB 2 " Reciver Tube 340.00$ 1.87 Buyers Class V Reciever Hitch Rated at 16000LB 2 1/2" Reciver Tube 350.00$ 1.88 Reese Titan Class 5 14000 LB 2 1/2" Reciever Hitch 675.00$ 1.89 Reese Class V Ball Mount with Pin 45.00$ 1.90 Reese Class V Pintle Mount with pull pin 140.00$ 1.91 Combination Pinlte/Ball (specify ball size) 90.00$ 1.92 PH20 Pintle hook 90.00$ 1.93 Deluxe TEK Prodigy Electric brake Control, Installed 310.00$ 1.94 6-way or 7-way trailer plug, installed 65.00$ 1.95 Swift Hitch Wireless Cameras Model SHO1 (qty 1-9) each 240.00$ 1.96 Swift Hitch Wireless Cameras Model SHO1 (qty 10-20) each 230.00$ 1.97 Swift Hitch Wireless Cameras Model SHO1 (qty 21+) each 220.00$ 1.98 Swift Hitch Wireless Cameras Model SHO2 (qty 1-9) each 295.00$ 1.99 Swift Hitch Wireless Cameras Model SHO2 (qty 10-19) each 275.00$ 1.100 Swift Hitch Wireless Cameras Model SHO2 (qty 20+) each 265.00$

Canopy Roofs (straight) For 96” to 132” Service Bodies, ALSO SEE Knapheide CC-KUV Bodies Section for bodies with tapered canopy's

1.101 55" Standard Canopy Roof for SRW 56" CA Body 3,230.00$ 1.102 55" Standard Canopy Roof for DRW 56" CA Body 3,460.00$ 1.103 65" Standard Canopy Roof for DRW 56" CA Body 4,115.00$ 1.104 73” Standard Canopy Roof for 108” Body installed at Factory 4,455.00$ 1.105 72” Standard Canopy Roof for 132” Body installed at Factory 5,460.00$ 1.106 Additional paint charge for Canopy Roofs 950.00$ 1.107 Finish paint inside of Cargo Area/canopy ILO of light gray finish 1,325.00$

Telescopic Sliding Roofs1.108 TSR to fit 96” SW Body 1,375.00$ 1.109 TSR to fit 96” DW Body 1,495.00$ 1.110 TSR to fit 108” SW Body 1,445.00$ 1.111 TSR to fit 108” DW Body 1,575.00$ 1.112 TSR to fit 132” DW Body 2,475.00$ 1.113 Painting Adder for TSR 96” & 108 575.00$ 1.114 Painting Adder for TSR132” 625.00$

Cost per mile for pick-up or Delivery to or from Moorhead, MN 2.25$ (Maximum charge per unit for pick-up/delivery one way $ 425.00)

Buyer's Guide for pricing Service Body: Chassis CA_____” SW____ DW____Make and Model of Chassis: __________________________________________

Base Body $ Light kit $Bumper $

Painting $Installation $BASIC PACKAGE TOBASIC PACKAGE TOTAL $Additional Options: $

$$$$

Delivery (max $ 425.00 one way) $Total Package $

Body and Equipment By:Bert’s Truck Equipment Inc.Jim McLaughlin, Commercial Fleet Sales3804 Hwy 75 NorthMoorhead, MN 56560800-232-3787, 218-233-8681Fax 218-233-9548Email: [email protected]

Web Site: www.bertsonline.com

mailto:[email protected]



1.0 Knapheide Cab Chassis KUV Utility/Service Bodies to fit 56”, 60”, 84”& 108” CA Chassis’sStandard Features:Body Shell14 gauge two-sided A40 galvanneal steel. Compartment top and back are onepiece seamless design. All doors, door openings, drip rails, and other exposedsteel edges to be hemmed for strength, safety and resistance to corrosion.Floor12 gauge treadplate with 1 3/8” return flange on each side. Side compartment back panel overlaps and interlocks with floor flange, providing support for weightof side compartment.Understructure 50,000 yield 11 gauge high strength steel cross sills.

Doors20 gauge two-sided A40 galvanneal steel double panel doors with hat section reinforcements.HingesCorrosion resistant all stainless steel continuous hinges provide full length support for the doors and pry-proof security with a built-in weather shield. Hinge to be spot welded to the door frame supported with a five year warranty.Rotary LatchesAutomotive rotary latches riveted to door with non-corrosive aluminum rivets incorporation stainless mandrels. Rotary latch is slam-latchable. Latching cam to be elongated to allow the latch to move vertically relative to the lockstrike to prevent torsional damage.Door StrikersAdjustable striker affixed to door frame with screws. (Door SealsAutomotive “bulb type” neoprene door seals to be installed by the manufacturer of the body on all door frames.Door RetainerDouble spring over center door retainers on all vertical doors, retains doors in positive open or closed position. Shelving18 gauge bright spangled galvanized shelves with hemmed dividers on 4” centers. Minimum 250 lbs. capacity rated.Exterior Prime PaintBody is completely immersed in electrodeposition gray epoxy prime paint featuring a zinc phosphate pre-coat and seal for additional corrosion protection. Prime paint is oven cured to provide a hard durable finish.Interior PaintInterior painted mid-gloss, mar resistant, light gray finish.UndercoatingBody is completely undercoated by the manufacturer of the body using minimum five (5) mils of water base acrylic.

WarrantyThe following items to be covered by minimum six (6) year limited warranty to first owner/user of record.No Rust-Thru Guarantee

Continuous Door Hinge – Guaranteed not to fail to operate or come off product.

Latches and Lock Cylinders – Guarantee against failure.

Shelves – Guaranteed not to fail in bending under maximum 250lb. rated load.

Other Standard FeaturesKnapTight Double panel rear doors with rear window guardsTwo Conduit Chutes to transport copper pipe, PVC, and conduitMasterlock system, standard (Knaplock keyless entry optional)Spacious cargo area for transporting large tools and oversized itemsTwo interior Dome Lights with light switch inside cargo areaGrab handle at rearMany other standard Features

Base Price includes, Standard Body as provided by Knapheide with Standard Shelving Package. All prices are FOB Moorhead and are Load Out, Prime painted

96” Bodies to fit Single Wheel 56” CA Chassis1.0-1 Knapheide KC96U1478 KUV Service Body Contract Price

(78” wide, 97 ¼” long, 62” high, 49” cargo area, 45.1" Interior Hieght) 7,226.00$

1.0-2 Knapheide KC96L1478 KUV Service Body(78” wide, 97 ¼” long, 68” high, 49” cargo area, 51.1" Interior Hieght) 7,476.00$

1.0-3 Knapheide KC96M1478 KUV Service Body(78” wide, 97 ¼” long, 78” high, 49” cargo area, 61.1" Interior Hieght) 7,730.00$

96” Bodies to fit Dual Wheel 56” CA Chassis1.0-4 Knapheide KC96U2094 KUV Service Body


1.0-5 Knapheide KC96L2094 KUV Service Body(94” wide, 97 ¼” long, 68” high, 54” cargo area, 51.1" Interior Hieght) 8,406.00$

1.0-6 Knapheide KC96M2094 KUV Service Body(94” wide, 97¼” long, 78” high, 54” cargo area, 61.1" Interior Hieght) 8,649.00$

1.0-7 Knapheide KC96H2094 KUV Service Body(94” wide, 97¼” long, 90” high, 54” cargo area, 73.1" Interior Hieght) 8,858.00$

108” Bodies to fit 60” CA Single Wheel Chassis1.0-8 Knapheide KC108U1478 KUV Service Body


1.0-9 Knapheide KC108L1478 KUV Service Body(78” wide, 107¼” long, 68” high, 49” cargo area, 51.1" Interior Hieght) 8,310.00$

1.0-10 Knapheide KC108M1478 KUV Service Body(78” wide, 107¼” long, 78” high, 49” cargo area, 61.1" Interior Hieght) 8,738.00$

108” Bodies to fit 60” CA Dual Wheel Chassis1.0-11 Knapheide KC108L2094 KUV Service Body

(94” wide, 107 ¼” long, 68” high, 54” cargo area, 51.1" Interior Hieght)8,867.00$

1.0-12 Knapheide KC108M2094 KUV Service Body(94” wide, 107¼” long, 78” high, 54” cargo area, 61.1" Interior Hieght)

9,164.00$ 1.0-13 Knapheide KC108H2094 KUV Service Body

(94” wide, 107¼” long, 90” high, 54” cargo area, 73.1" Interior Hieght)9,481.00$

1.0-14 89" wide Body ILO 94" wide Body Deduct

132” Bodies to fit 84” CA Dual Wheel Chassis1.0-15 Knapheide KC132L2094 KUV Service Body

(94” wide, 133 ¼” long, 68” high, 54” cargo area, 51.1" Interior Hieght)10,171.00$

1.0-16 Knapheide KC132M2094 KUV Service Body(94” wide, 133¼” long, 78” high, 54” cargo area, 61.1" Interior Hieght)

10,747.00$ 1.0-17 Knapheide KC132H2094 KUV Service Body

(94” wide, 133¼” long, 90” high, 54” cargo area, 73.1" Interior Hieght)10,747.00$

1.0-18 89" wide Body ILO 94" wide Body Deduct(94” wide, 158 ¼” long, 40” high, 54” cargo area) (75.00)$

157” Bodies to fit 108” CA Dual Wheel Chassis1.0-22 Knapheide KC157H2094 KUV Service Body

(94” wide, 157¼” long, 90” high, 54” cargo area, 73.1" Interior Hieght) 13,031.00$

169” Bodies to fit 120” CA Dual Wheel Chassis1.0-26 Knapheide KC169H2094 KUV Service Body

(94” wide, 169¼” long, 90” high, 54” cargo area, 73.1" Interior Hieght) 13,195.00$

1.0-27 Chassis Specific Mounting Kit (includes light adaptors for current Model Years) 210.00$

Light Kits Fuel Fill, and Bumper Options

Light Kits Fuel Fill, and Bumper Options1.20 LED Surface Mount lights (new style) S/T/T and B/U light kit with strobe feature 260.00$ 1.21 LED S/M lights (new style) S/T/T & B/U light kit with strobe (+80" wide Body) 340.00$ 1.22 Light harness adaptors other than Ford and LED Flashers refer to Knap OF Non Contact Item1.23 Strobe light hook up kit wired to OEM upfitter switch 125.00$ 123A Ecco Front Strobe Kit With wiring kit, Installed 350.00$ 1.24 Aluminum Fuel Fill Cup and pre punched hole, for fuel or DEF Location 88.00$ 1.25 GM Fuel Fill Kit required for GM Chassis 56” CA with box removal 335.00$ 1.26 GM Fuel Fill Kit required for GM Chassis 60-84” CA 110.00$ 1.27 Ford Fuel Fill Kit 40/56" CA DRW Chassis 90.00$ 1.28 TFI Ford Fuel Fill Kit for Ford 56" CA Chassis 350.00$ 128A Fill neck KIT and fuel Cap (required on chassis that do not have Fuel Cap) 275.00$ 1.29 78” Standard Treadplate or Galvi-grip Step Bumper 285.00$ 1.30 78” Standard Treadplate or Galvi-grip with PHR 285.00$ 1.31 78” Standard Treadplate or Galvi-grip with BMR 354.00$ 1.32 94” Standard Treadplate or Galvi-grip Step Bumper 339.00$ 1.33 94” Standard Treadplate or Galvi-grip with PHR 354.00$ 1.34 94” Standard Treadplate or Galvi-grip with BMR 426.00$ 1.35 94” Standard Grip Strut Bumper with PHR 695.00$

Paint options for Knapheide Standard Service Bodies1.36 Knapheide "blended" White OEM Paint KC-Series 96" Bodies 1,505.00$ 1.37 Knapheide "blended" White OEM Paint KC-Series 108" Bodies 1,670.00$ 1.38 Knapheide "blended" White OEM Paint KC-Series 132" Bodies 1,895.00$ 1.39 Knapheide "blended" White OEM Paint KC-Series 157" Bodies 2,215.00$ 1.40 Knap Liner or paint Bumper add 130.00$

Berts Paint Options1.41 Paint One Standard Color White X96J service bodies 1,775.00$ 1.42 Paint One Standard Color White X108J Service Bodies 1,895.00$ 1.43 Paint One Standard Color White X132D54J Service Bodies 2,095.00$ 1.44 Paint One Standard color White 6157D54 Service Bodies 2,495.00$ 1.45 Adder for color other than white 550.00$ 1.46 Adder for BC/CC 750.00$ 1.47 Finish paint inside of Cargo Area/canopy ILO of light gray finish 1,195.00$

Line-x cargo Liner (includes bumper) in Cargo Area1.48 96" Bodies 775.00$ 1.49 108" Bodies 795.00$ 1.50 132" Bodies 875.00$ 1.51 157" Bodies 1,025.00$

1.52 Basic Installation of all Knapheide Service Bodies: 915.00$ (Includes installation of body, light kit, bumper and fuel fill)

1.53 Installation of Knapheide Option fit items shipped loose from factory $110.00 Per Hr

American Eagle Drawers1.54 3" Drawer up to 30" wide for standard service body 280.00$ 1.55 5" Drawer up to 30" wide for standard service body 280.00$ 1.56 7" Drawer up to 30" wide for standard service body 280.00$ 1.57 Top Tray up to 30" wide Included1.58 Riser up to 30" wide Included1.59 3" Drawer up to 30-50" wide for standard service body 310.00$ 1.60 5" Drawer up to 30-50" wide for standard service body 310.00$ 1.61 7" Drawer up to 30-50" wide for standard service body 310.00$ 1.62 Top Tray up to 30" wide Included1.63 Riser up to 30" wide Included

Common Options For Knapheide utility bodies (some options may be required)1.64 Full Height Aluminum Rock Guards on front of body 150.00$ 1.65 Torsion Box Floor 96" & 108" Bodies (includes Mounting Kit) 815.00$ 1.66 Torsion Box Floor 132" Bodies (Includes Mounting Kit) 1,124.00$ 1.67 Torsion Box Floor 157" Bodies (IncLudes Mounting Kit) 1,377.00$ 1.68 Double Overlapped Front Vertical Doors ILO standard 130.00$ 1.69 Double Overlapped Door on Horizontal ILO Standard 110.00$ 1.70 Standard Bottle gas retainer, installed 353.00$ 1.71 Drop well bottle gas retainer, installed 366.00$ 1.72 LED Compartment Lights (1-strip) per Compartment 95.00$ 1.73 Transverse Compartment open to Curbside Front Vertical Compartment 825.00$ 1.74 Transverse Compartment open to Both Front Verticals Compartments 925.00$ 1.75 Interior Rope lights per compartment (Continuious) 125.00$ 1.76 LED Gromet mounted Strobe Lights in Rear of Body 295.00$ 1.77 Mechanics Vice Bracket (standard) 135.00$ 1.78 Removable Mechanics Vice Bracket 210.00$ 1.79 97 db back/up alarm installed 75.00$ 1.80 Variable db Back up Alarm, installed 120.00$ 1.81 White Noise back up alarm, installed 170.00$ 1.82 Star 240CFD Double Flash Strobe on Stand 210.00$ 1.83 LED Mini-Light bar, Installed on Pedistal 460.00$ 1.84 New Take off Pick-up box trade allowance (600.00)$ 1.87 Relocate OEM Backup camera 485.00$

See Price Schedule 11.1 for other Knapheide Option Fit Pricing

Hitch Options1.89 Class IV Receiver Hitch 325.00$ 1.90 Buyers Class V Reciever Hitch Rated at 16000LB 2 " Reciver Tube 340.00$ 1.91 Buyers Class V Reciever Hitch Rated at 16000LB 2 1/2" Reciver Tube 350.00$ 1.92 Reese Titan Class 5 14000 LB 2 1/2" Reciever Hitch 675.00$ 1.93 Reese Class V Ball Mount with Pin 45.00$

1.94 Reese Class V Pintle Mount with pull pin 140.00$ 1.95 Combination Pinlte/Ball (specify ball size) 90.00$ 1.96 PH20 Pintle hook 90.00$ 1.97 Deluxe TEK Prodigy Electric brake Control, Installed 310.00$ 1.98 6-way or 7-way trailer plug, installed 65.00$ 1.99 Swift Hitch Wireless Cameras Model SHO1 (qty 1-9) each 240.00$ 1.100 Swift Hitch Wireless Cameras Model SHO1 (qty 10-20) each 230.00$ 1.101 Swift Hitch Wireless Cameras Model SHO1 (qty 21+) each 220.00$ 1.102 Swift Hitch Wireless Cameras Model SHO2 (qty 1-9) each 295.00$ 1.103 Swift Hitch Wireless Cameras Model SHO2 (qty 10-19) each 275.00$ 1.104 Swift Hitch Wireless Cameras Model SHO2 (qty 20+) each 265.00$ 1.105 Ag Cam Wired backup camera 7" Monitor with one camera, 360.00$ 1.105A Ag Cam Wired backup camera 3.5" Monitor with one camera, 215.00$ 1.105B Ag Cam Wired backup camera 7" Monitor Qaud Screen, with one camera, 560.00$ 1.105C Ag cam additional camera, 65' cable 150.00$ 1.106 Installation of Ag cam camera, system one camera 220.00$ 1.106A Adder for Install of additional camera, each 110.00$

1.105D

Rostra OEM standard Compatable Camera,with chassis adaptor for GM Chassis, Installed (Chassis must be ordered with 7" monitor and factory programmed for backup camera) 275.00$ Cost per mile for pick-up or Delivery to or from Moorhead, MN 2.25$ (Maximum charge per unit for pick-up/delivery one way $ 425.00)

Page 7 of 7Buyer’sGuide for pricing Service Body: Chassis CA_____” SW____ DW____Make and Model of Chassis: __________________________________________

Base Body $ Light kit $Bumper $Painting $Installation $BASIC PACKAGE TOTAL $Additional Options: $

$$$




mailto:[email protected]


Bert's Truck Equipment of MoorheadPage 1 of 4

Knapheide “Crane Bodies” For Crane Applications #4000lb and GreaterStandard Features:Body Shell14 GA two-sided A40 galvanneal steel compartment wall panels, fenderskirts and drip rails with 12GA two-sided A40 galvanneal steel backs, bottoms and bulkhead. 12 GA treadplate top and backs full length welded to the compartment structure and floor.Floor1/8” thick treadplate floor with 1 3/8” return flange on each side. Side compartment back panel overlapping and interlocking with floor flange, providing support for weight of side compartment. Full length welded.UnderstructureTorsion box design with internal longitudinal supports and full width tubular cross sills. Shear plates and mounting incorporated into rear understructure.Crane Pedestal¼” wall box construction with ¾” steel mounting plate predrilled for crane mounting bolts. Crane pedestal isolated from side compartments. Rated for a maximum of 30,000, 38,000 for 60,000 ft. lbs. thru 360 degrees rotation depending on model selected.Tailgate14 gauge two-sided A40 galvanneal steel double panel construction 12” high slammable style installed on body.Doors14GA two-sided A40 galvanneal steel outer door panel with 20GA two-sided A40 galvanneal steel liner and hat section reinforcement. Overlap style doors on front vertical and horizontal compartments.CompartmentsSeam welded inside and outside of compartments.HingesCorrosion resistant all stainless steel continuous hinges to provide full length support for the doors and pry-proof security with a built-in weather shield. Hinge are spot welded to the door frame supported with a five year warranty.LatchesStainless steel three point twist latches riveted to door with non-corrosive stainless steel rivetsDoor SealsAutomotive “bulb type” neoprene door seals isinstalled by the manufacturer of the body on all door frames.Door RetainerDouble spring over center door retainers on all vertical doors, retains doors in positive open or closed position. Shelving (optional)18 gauge bright spangled galvanized shelves with hemmed dividers on 4” centers. Minimum 250 lbs. capacity rated. Shelves can be positioned vertically on 2” centers.

of 4Exterior Prime PaintBody is completely immersed in electrodeposition gray epoxy prime paint featuring a zinc phosphate precoat and seal for additional corrosion protection. Prime paint is oven cured to provide a hard durable finish.Interior PaintInterior paint is mid-gloss, mar resistant, light gray finish.UndercoatingBody is completely undercoated by the manufacturer of the body .InstallationBody is supplied a recommended installation process along with detailed installation instructions that conforms to all applicable Federal Motor Vehicle Safety Standards. Further, manufacturer of the body to supply owner manual describing proper care and maintenance of the body for user.WarrantyThe following items to be covered by minimum six (6) years limited warranty to first owner/user of record.No Rust-Thru GuaranteeContinuous Door Hinge – Guaranteed not to fail to operate or come off product.Latches and Lock Cylinders – Guarantee against failure.Shelves – Guaranteed not to fail in bending under maximum 250lb. rated load.Lighting Lighting to meet all applicable FMVSS standards. Light harness are encased in plastic loom, and all wires colored for ease in troubleshooting. Wire harness have connectors compatible with applicable Ford, GM and Dodge chassis without splicing. Stop, tail, turn, backup and side maker lights recessed in aluminum light boxes at rear of body. Body end panels prepunched for wires and box mounting.All exterior S/T/T lights are included in base priceLighting Wire RetentionWires must be retained by mechanical fastening system. Base Price includesStandard Body as provided by Knapheide. Shelving packages are not included. All prices are FOB Moorhead and are Load Out, Prime painted

108” Bodies to fit 60” CA Chassis1.0-1 Knapheide, 6108DL-38, Standard Crane Body 12,018.00$

(94” x108” Long, 44” compartment height)

1.0-2 Knapheide, 6108DLR-38, Standard Crane Body 12,565.00$ (94” x108” Long, 44” compartment height, 60” Raised Front Vertical)

132” Bodies to fit 84” CA Chassis1.0-3 Knapheide, 6132DL-30, Standard Crane Body 10,617.00$

(94” 132” Long, 44” compartment Hieght)

1.0-4 Knapheide, 6132DLR-30, Standard Crane Body 11,164.00$

1.0-5 Knapheide, 6132D-38L, Standard Crane Body 12,834.00$ (94” 132” Long, 44” compartment Hieght)

of 41.0-6 Knapheide, 6132DLR-38L, Standard Crane Body 13,380.00$

(94” 132” Long, 44” compartment Hieght, 60" Raised Front Vertical)

1.0-7 Knapheide, 6132DLHR-60J, Standard Crane Body 15,342.00$ (94” x132” Long, 44” compartment height, 60” Raised Front Vertical)

1.07A Knapheide, 6132DLR-44, Standard Crane Body 13,461.00$ (94” 132” Long, 44” compartment Hieght, 60" Raised Front Vertical)

Light kits are shipped loose and included in base body price

Mounting Kit Bumpers and Other Commons Standard Options1.20 Mounting kit for F350/450/555 and GM 3500-5500 38J Series Body 325.00$ 1.21 Mounting kit for F350/450/555 and GM 3500-5500 30J Series Body 160.00$ 121A Front mounting kit for 60 series medium duty bodies 175.00$ 1.22 DL Series Rear Crane Body Bumper Installed at factory

(w/outrigger tubes, vice mount, receiver hitch & through compartmen 2,003.00$ 1.23 DLH Series Rear Crane Body Bumper Installed at factory

(w/outrigger tubes, vice mount, receiver hitch & through compartmen 2,365.00$

1.24DLH Series Rear Crane Body Bumper Installed at factory (body with Master Lock System 2,746.00$ (w/outrigger tubes, vice mount, receiver hitch & through compartment)

1.25 Aluminum Fuel Fill Cup and pre punched hole 85.00$

Paint options for Knapheide Standard Service Bodies1.27 Paint One Standard Color 6108DL Crane Bodies 1,750.00$ 1.28 Paint One Standard Color 6132DL Crane Bodies 1,945.00$ 1.29 Adder for Red - Yellow 450.00$ 1.30 Adder for BC/CC 795.00$

Basic Installation of all Knapheide Crane Bodies:1.31 (Includes installation of body, light kit, bumper and fuel fill) 1,575.00$


Shelving and other OptionsKnapheide Standard Package “A”

1.32 Installed in 6108DL-38J 1,030.00$ 1.33 Installed in 6108DLR-38J 1,280.00$ 1.34 Installed in 6132DL-38J 1,254.00$ 1.35 Installed in 6132DLR-38J 0r 6132LHR-60J 1,501.00$

Knapheide Standard Package “B”1.36 Installed in 6108DL-38J 1,133.00$ 1.37 Installed in 6108DLR-38J 1,263.00$ 1.38 Installed in 6132DL-38J 1,355.00$ 1.39 Installed in 6132DLR-38J 0r 6132LHR-60J 1,602.00$

Knapheide Standard Package “C”1.4 Installed in 6108DL-38J 2,341.00$

1.41 Installed in 6108DLR-38J 2,677.00$ 1.42 Installed in 6132DL-38J 2,652.00$ 1.43 Installed in 6132DLR-38J 0r 6132LHR-60J 2,900.00$ 1.44 Crane Body A/E Drawer Stack(1-7", 3-5" & 3-3" Drawers) 1,895.00$

Page 4 of 4See Price Schedule 11.1 for other Knapheide Option Fit Pricing

Buyer’sGuide for pricing Crane Body: Chassis CA_____” Make and Model of Chassis: __________________________________________

Base Body $ Bumper $Painting $Installation $BASIC PACKAGE TOTAL $

Shelving & Options: $$$$$$$$$$$




Service Bodies

Vendor Name: Bert's Truck Equipment, IncContact Person: Jim McLaughlinStreet Address: 3804 Highway 75 NorthP.O. Box: 336City, State, Zip Moorhead, MN 56561-0336Phone #: 218-233-8681Toll Free #: 800-232-3787Fax #: 218-233-9548Email Address: [email protected]: www.bertsonline.com

Version of Excel used: 2013

2.0 UTILITY /SERVICE BODYMake

WarrantyDate & I.D. of Price List

Discount to be applied to Price List* (see note below) 0.00%Installation of Utility/Service Body as per MnDOT spec 1.0 See Attached Pric

Price of FMVSS 108 lighting package See Attached Pric Price of ICC bumper under ride protection See Attached Pric

Installation of ICC bumper under the protection See Attached Pric

Delivery

Delivery Starting Point AddressPrice per loaded mile for delivery $2.25

Delivery Time Frame in calendar days ARO 120 +/-

Shop Rate per HourShop Rate for Mechanical work per hour 110.00$

Body Shop Rate per hour 110.00$

*Note: The "Discount to be Applied to Price List" must be a

Moorhead, MN 56

Fiberline Fibergals 5 Year Limited Wa

SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED

ce Schedule ce Schedule ce Schedule ce Schedule

6560

ss Utility Bodies arranty

10/17/2018



FIBER LINE SERVICE BODY – STANDARD EQUIPMENT STANDARD BODY EQUIPMENT INCLUDES: Contract Price· 1/8” Steel treadplate floor and bulkhead, primed and painted gloss black.· Gelcoat finish to match standard chassis white.· Molded fiberglass side packs.· All interior fiberglass gelcoated white.· Stainless steel paddle latches, all keyed alike.· Fully adjustable door strikers with safety catch.· Fiber Line designed automotive style weather-strip.· Aluminum treadbrite front rock guards.· Stainless steel rear wheel well rock guards.· Stainless steel HD hinges.· All stainless steel bolts and self-locking nuts.· Extruded aluminum drip rails above all side doors.· Fiberglass bulkhead between compartments.· Flush shock mounted exterior lights to meet FMVSS#108.· Lighted license plate bracket.· Loomed one piece wiring harness with molded plug.· Floor drains in front and rear vertical compartments.· Dual fuel recess molded into streetside side pack.· 8” Aluminum drop-down tailgate (40" high bodies only).· Vents in each side pack.· Cable door stops on all side doors.· Non skid on tops of side packs.

1.0-1 96 Standard body (Single Rear Wheel 56" CA)Body Length - 96"Body Width - 79"Body Height - 40"Compartment Depth - 15"

Price 6,646.00$ 1.0-2 96 Standard body (Dual Rear Wheel 56" CA)

Body Length - 96"Body Width - 94"Body Height - 40"Compartment Depth - 20"

Price 7,450.00$ 1.0-3 96" High side body (Single Rear Wheel 56" CA)

3 point "D" ring latches on all side doorsBody Length - 96"

Body Width - 79"Body Height - Up to 64" TallCompartment Depth - 15"

Price 8,812.00$

1.0-4 96" High Side body (Dual Rear Wheel 56" CA)3 point "D" ring latches on all side doorsBody Length - 96"Body Width - 94"Body Height - Up to 64"Compartment Depth - 20"

Price 9,127.00$ 1.0-5 96 Standard body (Single Rear Wheel 56" CA)


Price 6,646.00$ 1.0-6 96 Standard body (Dual Rear Wheel 56" CA)


Price 7,450.00$ 1.0-7 108" Standard body (Dual Rear Wheel 60" CA)

Body length -108"Body Width - 94"Body Height - 40"Compartment Depth - 18"

Price 7,989.00$ 1.0-8 108" Standard body (Single Rear Wheel 60" CA)

Body length - 108"Body Width - 79"Body Height - 40"Compartment Depth - 15"

Price 7,204.00$ 1.0-9 108" Line body (Dual Rear Wheel 60" CA)


Price 9,884.00$ 1.0-10 108" Line body (Single Rear Wheel 60" CA)

Body length - 108"

Body Width - 79"Body Height - 48"Compartment Depth - 15"

Price 9,146.00$ 1.0-11 132" Standard body (Dual Rear Wheel 84" CA)

Body Length - 132"Body Width - 94"Body Height- 40"Compartment Depth - 18"

Price 9,266.00$

1.0-12 132" Line body (Dual RearWheel 84" CA)Body Length - 132"Body Width - 94"Body Height - 48"Compartment Depth - 18"

Price 13,019.00$

COMPARTMENT OPTIONS:1.20 Standard shelving package for all bodies up to 108" length:

(2) adjustable aluminum open shelves in each front vertical compartment:(1) fixed aluminum shelf with removable dividers in streetside horizontal compartment(1) adjustable aluminum open shelf each rear compartment

1,155.00$ 1.21 Standard shelving package for all 132" length bodies:

{2} adjustable aluminum open shelves in each front vertical compartments(2) adjustable aluminum open shelves in 2nd vertical compartment(1) Fixed divider tray with removable dividers in streetside horizontal compartment(1) adjustable aluminum open shelf in each rear compartment

1,744.00$ COMPARTMENT OPTIONS:Vertical Compartment Shelving:

1.22 (1) Adjustable aluminum divider tray with removable dividers 250.00$ 1.23 (2) Adjustable aluminum divider tray with removable dividers 443.00$

(3) Adjustable aluminum divider tray with removable dividers 633.00$ Aluminum pull-out drawer on slides: 2" deep with dividers on 2" centers,

1.24 Mounted on full extension Grant sides must include price of fixed shelf for mounting 269.00$

HORIZONTAL COMPARTMENT SHELVING:1.25 (1) Fixed aluminum divider tray with removable dividers 193.00$ 1.26 (1) Fixed aluminum open shelf 125.00$

Aluminum pull-out drawer on slides: 2" deep with dividers on 2" centers, 295.00$

1.27 Mounted on full extension Grant sides must include price of fixed shelf for mounting 298.00$

ADDITIONAL COMPARTMENT OPTIONS:1.28 8 drawer metal cabinet installed 275.00$ 1.29 9 drawer metal cabinet installed 275.00$ 1.3 6 drawer metal cabinet installed 242.00$ 1.31 18 drawer metal cabinet installed 404.00$ 1.32 Hotstick door only 248.00$ 1.33 Hotstick door with full-lengh fiberglass shelf 539.00$ 1.34 Full-length fiberglass shelf 255.00$ 1.35 Pull-out tool box tray (250# capacity) 863.00$

COMPARTMENT ACCESSORIES:1.36 Gas door shocks (per compartment) for vertical doors 85.00$ 1.37 Swivel hook (per hook) 38.00$ 1.38 Fixed hook (per hook) 23.00$ 1.39 LED Flexible tube lighting (per compartment) three sides of the 102.00$

Compartment opening

BODY COMPONENTS:1/8" aluminum tread plate floor and subframe in lieu of steel

1.40 40" tall 96" body 362.00$ 1.41 40" tall 108" body 625.00$ 1.42 40" tall 132" body 737.00$

1/8" aluminum treadplate floor and subframe in lieu of steel1.43 High Side 96" body 643.00$ 1.44 48" tall 108" body 1,517.00$ 1.45 48" tall 132" body 1,629.00$

GELCOAT COLORS:Gelcoat "Blended White" to be close match to Truck Manufactures Std white paint code

Gelcoat charge other than white (does not include metallic or black colors) If available

1.46 96" body 595.00$ 1.47 108" body 695.00$ 1.48 132" body 795.00$ 1.48A Paint Fiberglass Body Custom Color

96" body 2,775.00$

108" body 2,775.00$ 132" body 2,775.00$

EXTERIOR BODY ACCESSORIES:1.49 Pipe vice table and rest 259.00$ 1.50 Material rail and (6) hooks 420.00$ 1.51 Crane reinforcement for 25,000 ft. lb. Installed in rear vertical

compartment 1,880.00$ 1.52 Fiberglass sliding top with double rear doors. 1,992.00$ 1.53 Expanded metal aluminum shovel basket up to 132" long and 8" high 564.00$ 1.54 Oxygen/acetylene tank holder (each) 134.00$ 1.55 Aluminum post for strobe (above cab top) 117.00$ 1.56 Aluminum expanded metal cab guard , tube frame with expanded metal 665.00$

BUMPERS:1.62 8" non recessed steel treadplate bumper 467.00$ 1.63 8" recessed steel treadplate bumper with saftey chain "D" rings 527.00$ 1.64 8" non recessed steel gripstrut bumper 569.00$ 1.65 8" recessed steel gripstrut bumper with saftey chain "D" rings 664.00$ 1.66 8" non recessed aluminum Treade-Brite bumper 527.00$ 1.67 8" recessed aluminum Treade-Brite with saftey chain "D" rings 587.00$ 1.68 Add stake pocket in any bumper for vice mount

LOADBED AND COMPARTMENT TOPS:Aluminum Tread-Brite on loaded walls (96" Body)

1.68 35" & 40" high 652.00$ 1.69 High side 760.00$

Aluminum Tread-Brite on loaded walls (108" Body)1.70 40" high 734.00$ 1.71 48" high 1,100.00$

Aluminum Tread-Brite on loaded walls (132" Body)1.72 40" high 999.00$ 1.73 48" high 1,450.00$

Aluminum Tread-Brite on compartment tops1.74 96" body 652.00$ 1.75 108" body 760.00$ 1.76 132" body 999.00$

FIBERGLASS FLIP-TOP COMPARTMENT (WITH 3" DEEP DIVIDER TRAY):

1.77 Flip-top for 96" body (per side) 1,052.00$ 1.78 Flip-top for 108" body (per side) 1,052.00$ 1.79 Flip-top for 108" body (per side) 2,103.00$

LATCHS AND LOCKING SYSTEMS1.79 Stainless steel 3-point D-ring latch (price per door) 103.00$

Gang-locking system1.80 96" body 759.00$ 1.81 108" body 759.00$ 1.82 132" body 1,010.00$

Electric door locks, locks all doors with one FOB1.83 96" body 1,467.00$ 1.84 108" body 1,467.00$ 1.85 132" body $ 1,955.00

TRANSVERSE COMPARTMENT AND OPTIONS:1.86 Steel tread plate transverse open to one side 485.00$ 1.87 Aluminum Treade-Brite transverse open to one side 525.00$ 1.88 Transverse open to both sides (either steel and aluminum) 100.00$ 1.89 Rack and one drawer - pull one side 2/3rd's length 612.00$ 1.90 Rack and two drawers - pull one side 2/3rd's length 940.00$ 1.91 Rack Cage and three drawers - pull one side 2/3rd's length 1,113.00$ 1.92 Rack and one drawer - pull both sides full length 645.00$ 1.93 Rack and two drawers - pull both sides full length 1,007.00$ 1.94 Rack and three drawers - pull both sides full length 1,382.00$ 1.95 Fixed transverse shelf - 2/3rd's length 269.00$ 1.96 Fixed transverse shelf - full length 298.00$

LADDER AND PIPE RACK:1.97 Bow ladder rack (steel) 508.00$ 1.98 Bow ladder rack (aluminum) 754.00$ 1.99 Side mount ladder rack (steel) 365.00$ 1.100 Side mount ladder rack (aluminum) 568.00$ 1.101 Horizontal ladder rack with roller (steel) 582.00$ 1.102 Horizontal ladder rack with roller (aluminum) 683.00$ 1.103 Slanted steel pipe rack 358.00$ 1.104 Furnish and install aluminum pipe rack 358.00$ 1.105 Ladder rack over center lock 175.00$ 1.106 6" PVC tube with aluminum end caps 325.00$

GRAB HANDLES:1.107 Furnish and install grab handle (each) 44.00$

2.133 Basic Installation of Fiberline Fiberglass Bodies 965.00$ 2.134 Installation Kit 130.00$ 2.135 Light plug adaptor 80.00$ 2.136 Installation of OEM Supplied Backup Camera 110.00$ 2.137 Provided and install Standard Rostra OEM Compatable Camera 260.00$

2.138 Provide and install HD Rostra OEM Compatable Camera 325.00$


Buyer’sGuide for pricing Service Body: Chassis CA_____” SW____ DW____Make and Model of Chassis: __________________________________________

Base Body $Shelving Package $Bumper $

$Installation $

BASIC PACKAGE TOTAL $$

Additional Options: $$$$$




service bodies5) truck... · 14 gauge two-sided a40 galvanneal steel. compartment top and back are...

Documents