series4100 dat-sw en
TRANSCRIPT
-
8/10/2019 Series4100 Dat-sw En
1/20
SecureCommunications
R&SM3SR Series4100Software Defined RadiosSpecifications
-
8/10/2019 Series4100 Dat-sw En
2/20
Version 04.00, July 2011
2 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
CONTENTSSpecifications.................................................... ....................................................... ....................................................... 3
General data ...........................................................................................................................................................................................3
Transmitter data......................................................................................................................................................................................4
Receiver data..........................................................................................................................................................................................5
Radio data with options...........................................................................................................................................................................7
R&SFK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)................................................................................................7
R&SVK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option) ..........................................................8
R&SGS4114S LINK software (option for operation with tactical data links)......................................................................................8
R&SGS4117S CE conformity mark (option) ......................................................................................................................................8
R&SGS4156S split site (option).........................................................................................................................................................9
Audio and mechanical data...................................................................................................................................................................10
Power supplies......................................................................................................................................................................................12
Ordering information ........................................................... ....................................................................... .................. 14
R&SEK4100A/D receiver ....................................................................................................................................................................14
R&SXK4115A/D transceiver................................................................................................................................................................15
500 W and 1000 W transceiver systems ..............................................................................................................................................16
Auxiliary equipment...............................................................................................................................................................................17
-
8/10/2019 Series4100 Dat-sw En
3/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 3
SpecificationsSpecifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental conditions
met, calibration cycle adhered to, and all internal automatic adjustments performed.
Data without tolerance limits is not binding.
The radio systems described are hardware- and software-configurable. The system delivered has the configuration as confirmed in the
order.
General dataTX 1.5 MHz to 29.999999 MHzFrequency range
RX 10 kHz to 29.999999 MHz
Resolution 1 Hz
100 s 1 109
Frequency stability (OCXO)
per year 1 107
External reference frequency input 0 dBm 3 dB, 50 1/5/10 MHz
Preset pages 100
user-programmable 400 half-duplex channels
fixed-programmed 1839 ITU channels
Channel memory
additional channels for ALE 100 half-duplex channels
Test (built-in test facility) failure localization down to module level PBIT (power-on BIT)
CBIT (continuous BIT)
IBIT (initiated BIT)Remote control interfaces RS-232-C, Ethernet (IEEE 802.3)
HF parameters in line with STANAG 4203, annexes B + C
installation in operating room (distance = 1 m)
R&SEK4100A 45 dBA
R&SXK4115A/D 55 dBA
Acoustic noise
500 W/1000 W transceiver system 65 dBA
Waveforms
Classes of emission A1A, A3E, H3E, B8E, B7D, F1D, F1B,
F3E, J3E (LSB, USB), J2D (LSB, USB)
EPM (optional) powerful HF slow hopping wave-form with
embedded COMSEC
R&SSECOM-H
ALE 2G (second-generation automatic link
establishment, optional)
in line with FED-STD-1045/1046/1049,
MIL-STD-188-141B, App. A + B
ALE 3G (third-generation automatic link
establishment, optional)
in line with STANAG 4538, FLSU (fast link
setup), CLC (circuit link control)
HF modem (optional) in line with STANAG 4285,
STANAG 4539 (incl. STANAG 4415),
MIL-STD-188-110B, section 5.3 + App. C,
STANAG 4529, STANAG 4481,
STANAG 5065, MIL-STD-188-110B
App. F
Data link protocols (ARQ, optional) in line with STANAG 4538, LDL (low
latency data link protocol), HDL (high rate
data link protocol)
Data link capability (optional) in line with STANAG 5511,
MIL-STD-188-203-1A,
STANAG 5522 (fixed frequency)
MTBF
Conditions in line with MIL-HDBK-217F, +21 C, GB = ground benign, NS = naval shelteredR&SEK4100A/D basic receiver without options GB 52000 h, NS 10500 h
R&SXK4115A/D basic transceiver without options GB 50000 h, NS 9100 h
R&SGX4100A/D basic exciter without options GB 63000 h, NS 11000 h
R&SVK4150 500 W power amplifier 6119.9002.03/.13 GB 82000 h, NS 20500 h
R&SVK4190 1000 W power amplifier 6120.1501.03/.13 GB 74000 h, NS 18000 h
R&SIN4150 500 W power supply 6120.0705.02 GB 122000 h, NS 44000 h
R&SIN4150 500 W power supply 6120.0705.03 GB 121000 h, NS 43000 h
R&SIN4150 500 W power supply 6120.0705.12 GB 122000 h, NS 45000 h
R&SIN4190 1000 W power supply 6120.2708.02 GB 117000 h, NS 41000 h
R&SIN4190 1000 W power supply 6120.2708.03 GB 116000 h, NS 41000 h
R&SBV4190 transformer 6120.7700.08 GB 397000 h, NS 211000 h
R&SIN4000A power supply 6105.5800.02 GB 100000 h, NS 40000 h
R&SGB4000C local control panel 6105.6006.03/.06 GB 696000 h, NS 126000 h
-
8/10/2019 Series4100 Dat-sw En
4/20
Version 04.00, July 2011
4 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
R&SFK4120 digitally tuned RF
selection
6119.5007.02 GB 162000 h, NS 26000 h
R&SFK4140 digitally tuned RF
selection
6119.6003.02 GB 125000 h, NS 19600 h
R&SGS4102 NMEA (DSC) interface 6119.3504.02 GB 248000 h, NS 44000 h
MTTR all units and models < 30 min
Transmitter data
All transmitter data refers to a load impedance of 50 ; without the R&SFK4120/FK4140 digitally tuned RF selection.
RF output power
constant envelope modes 100 W (CW) + 1.0/ 0.5 dB150 W transceiver
non-constant envelope modes 150 W(PEP) + 1.0/ 0.5 dB
500 W transceiver system1 all modes 500 W 0.5 dB
1000 W transceiver system1 all modes 1000 W 0.5 dB
RF emergency output power
(500 W and 1000 W systems)
battery operation 100 W(CW) 1 dB
Duty cycle continuous transmission
Power step tolerance
150 W (PEP), 100 W (PEP/CW) +1.0/0.5 dB
50 W (PEP/CW) 1 dB
20 W (PEP/CW) 1 dB
10 W (PEP/CW) 1.5 dB
150 W transceiver
10 mW (PEP/CW) +3.7/2.7 dB
500 W 0.5 dB
250 W 1 dB
100 W 1 dB
50 W 1.5 dB
20 W 2 dB
500 W transceiver system1
OFF/10 mW no RF output on power amplifier
1000 W 0.5 dB
500 W 0.5 dB
250 W 1 dB
100 W 1 dB
50 W 1.5 dB
1000 W transceiver system1
OFF/10 mW no RF output on power amplifier
VSWR power reduction
VSWR 1.5 100 W(PEP/CW)/150 W (PEP) 1.0 dBVSWR 2.4 100 W(PEP/CW) 1.0 dB
150 W transceiver
VSWR > 10 W (PEP/CW)
VSWR 1.5 500 W (PEP/CW) 1.0 dB
VSWR 2.0 400 W (PEP/CW) 1.0 dB
500 W transceiver system
VSWR > 100 W (PEP/CW)
VSWR 1.5 1000 W (PEP/CW) 1.0 dB
VSWR 2.0 800 W (PEP/CW) 1.0 dB
1000 W transceiver system
VSWR > 100 W (PEP/CW)
Settling time after power level changes
150 W transceiver < 50 ms
500 W transceiver system < 1 s
1000 W transceiver system < 1 s
fixed frequency
RX TX 10 ms
RX/TX switching time
TX RX 15 ms
Third-order intermodulation (TOI)
150 W transceiver 32 dB below PEP
500 W transceiver system 36 dB below PEP
1000 W transceiver system 36 dB below PEP
measured at maximum nominal output power in A1A
f0 1 kHz 110 dBc (1 Hz)
f0 30 kHz 135 dBc (1 Hz)
f0 5 % 145 dBc (1 Hz)
Carrier noise level
f0 10 % 150 dBc (1 Hz)
1 See section on R&S
GS4117S for limitations.
-
8/10/2019 Series4100 Dat-sw En
5/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 5
TX harmonics
150 W transceiver at 100 W(CW) 45 dBc
500 W transceiver system at 500 W(CW) 48 dBc
1000 W transceiver system at 1000 W(CW) 48 dBc
Carrier rejection J3E 60 dB below PEP
Sideband rejection J3E 60 dB below PEP
25 % of max. output power,
in line with MIL-STD-188-141B
fc= center frequency of bandwidth (Hz)
B = TX modulation bandwidth (Hz)fc 4 B to fc + 4 B 40 dBc
0.95 fcto fc 4 B 60 dBc
fc + 4 B to 1.05 fc 60 dBc
< 0.95 fc 80 dBc
Spurious emissions
> 1.05 fc 80 dBc
voice (J3E) passband 300 Hz to 3400 HzTX modulation bandwidth2
data (J2D/B7D) passband 300 Hz to 3050 Hz
Signal-to-noise ratio J3E, H3E, in line with ITU-T (O.41/P53) 50 dB below PEP, weighted
Automatic level control (ALC)
J2D and B7D adjustable in steps of 1 dBPeak power to average power ratio
(PEP/PAVG) all other modes adjusted automatically
Selective level control (option) available for 500 W and 1000 W power
amplifiers
fully digital narrowband measurement of
the forward and reflected power at the
operational frequency, recommended for
severe co-site conditions
Voice compressor J3E, A3E, H3E, F3E compression ratio for voice signals:
> typ. 6 dB
Receiver dataAll receiver data without the R&S
FK4120/FK4140 digitally tuned RF selection and receiver input protection.
RX test signal generator source impedance: 50 . The receiver data is valid for the standalone receivers as well as for the receiving
part of the receiver/exciter and of the 150 W transceiver.
Input impedance VSWR 3 50
operation, specs complied with +7 dBm (1 V (VEMF))Antenna input level (max.)
without damage +53 dBm (200 V (VEMF))
Sensitivity (without preamplifier)
10 kHz to 15 kHz J3E (SSB), B = 1200 Hz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
typ. 98 V (VEMF) (73 dBm)
15 kHz to 50 kHz J3E (SSB), B = 1200 Hz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
98 V (VEMF) (73 dBm)
50 kHz to 100 kHz J3E (SSB), B = 1200 Hz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
9.8 V (VEMF) (93 dBm)
A1A (CW), B = 300 Hz
S/N = 10 dB
0.45 V (VEMF) (120 dBm)
J3E (SSB), B = 2.7 kHz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
0.8 V (VEMF) (115 dBm)
100 kHz to 29.999999 MHz
A3E (AM), B = 6.0 kHz, m = 70 %
psophometric weighting filter (ITU-T),SINAD = 10 dB
1.6 V (VEMF)(109 dBm)
Sensitivity (with preamplifier)
A1A (CW), B = 300 Hz
S/N = 10 dB
0.2 V (VEMF)(127 dBm)
J3E (SSB), B = 2.7 kHz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
0.32 V (VEMF) (123 dBm)
100 kHz to 29.999999 MHz
A3E (AM), B = 6.0 kHz, m = 70 %
psophometric weighting filter (ITU-T),
SINAD = 10 dB
0.7 V (VEMF) (116 dBm)
Noise figure (with/without preamplifier) 9 dB/18 dB
2 See section on R&S
GS4117S for limitations.
-
8/10/2019 Series4100 Dat-sw En
6/20
Version 04.00, July 2011
6 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
Oscillator reradiation at antenna input 10 V (VEMF) at 50
Second-order intercept point (IP2) without preamplifier, interfering signals of
2 0 dBm
+60 dBm
Third-order intercept point (IP3) without preamplifier, interfering signals of
2 0 dBm, f = 30 kHz
+35 dBm
Inband intermodulation in line with MIL-STD-188-203-1A,
frequency of audio tones within
450 Hz to 3050 Hz,
interfering signals of 2 53 dBm
IM3 40 dB (IP3 33 dBm)
Image rejection 80 dBIF rejection 90 dB
Sideband rejection (SSB) 60 dB below PEP
Crossmodulation (without preamplifier) useful signal level 1 mV (VEMF),
interfering signal level 4 V (VEMF),
interferer frequency f 30 kHz,
interferer modulation A3E,
modulation frequency 1 kHz,
modulation depth 30 %
10 % modulation transfer
Blocking (without preamplifier) useful signal level 2 mV (VEMF),
interfering signal level 5 V (VEMF),
interferer frequency f 30 kHz
3 dB reduction of audio level
Desensitization (without preamplifier) psophometric weighting filter,
useful signal level 30 V (VEMF),
RX bandwidth 2700 Hz,
interfering signal level 100 mV (VEMF),
interferer frequency f = 30 kHz
SINAD 20 dB
in line with MIL-STD-188-141B
for 99 % of 3 kHz channels 112 dBm
for 0.8 % of 3 kHz channels 106 dBm
for 0.2 % of 3 kHz channels > 106 dBm
Internally generated spurious emissions
no internally generated spurious outputs above 90 dBm
AGC range J3E, without preamplifier 3 dB output variation
for 1 V to 1 V (VEMF)
BFO (beat frequency oscillator) 2 kHz in 10 Hz steps
Passband tuning 2 kHz in 10 Hz steps
Squelch syllabic, RSSI, tone, RSSI + syllabic,
RSSI + tone
Automatic multinotch filter notch frequency 0 Hz to 3.4 kHz attenuation of unwanted signals typ. 20 dB
Noise blanker types: FLASH, SPARK, ELECTRICFENCE, available for A3E/ H3E/ F3E/ J3E
background noise is attenuated bytyp. > 10 dB for a predefined noise pattern
Mute 90 dB
Receive bandwidths (3 dB)
F3E 6.0 kHz, 8.0 kHz
A3E 3.5 kHz to 8.0 kHz, 500 Hz steps
H3E 2.1/2.4/2.7/3.1 kHz
B8E 1.8 kHz to 3.1 kHz, 100 Hz steps
B7D 1.8 kHz to 3.1 kHz, 100 Hz steps
J3E 50 Hz to 250 Hz, 50 Hz steps
300 Hz to 3.1 kHz, 100 Hz steps
J2D 100 Hz to 3.1 kHz, 100 Hz steps
A1A 50 Hz to 250 Hz, 50 Hz steps
300 Hz to 3.1 kHz, 100 Hz steps
baud rates 50 Bd, 75 Bd, 100 Bd, 150 Bd, 300 Bd,
600 Bd
F1D/F1B
shifts 42 Hz, 85 Hz, 170 Hz, 425 Hz
-
8/10/2019 Series4100 Dat-sw En
7/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 7
Radio data with options
R&S
FK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)
Digitally tuned RF selection R&S
FK4120 R&S
FK4140
TX: 1.5 MHz to 29.999999 MHz TX: 1.5 MHz to 29.999999 MHzFrequency range
RX: 10 kHz to 29.999999 MHz
(lowpass filter for reception < 1.5 MHz)
RX: 10 kHz to 29.999999 MHz
(lowpass filter for reception < 1.5 MHz)
Stopband attenuation
At 10 % offset from operating
frequency
20 dB 40 dB
Input voltage protection
f 29.999999 MHz, Ri= 50 ,
without damage
VAnt200 V (VEMF) VAnt200 V (VEMF)
Transmitter
f0 1 kHz: 110 dBc (1 Hz) f0 1 kHz: 110 dBc (1 Hz)
f0 30 kHz: 135 dBc (1 Hz) f0 30 kHz: 135 dBc (1 Hz)
Carrier noise level
measured at maximum nominal output
power in A1A; transmitter terminated
into 50
f0 10 %
< 155 dBc (1 Hz), f < 10 MHz
< 165 dBc (1 Hz), f > 10 MHz
f0 5 %
< 155 dBc (1 Hz), f < 10 MHz
< 165 dBc (1 Hz), f > 10 MHz
Receiver
without preamplifier:
A1A < 0.8 V (VEMF) (115.0 dBm)
J3E < 1.32 V (VEMF) (110.6 dBm)
without preamplifier:
A1A < 1.0 V (VEMF)(113.0 dBm)
J3E < 1.8 V (VEMF) (107.9 dBm)
Sensitivity
100 kHz to 29.999999 MHz,
SINAD = 10 dB,psophometric weighting filter (ITU-T),
A1A: B = 300 Hz, J3E: B = 2.7 kHz
with preamplifier:
A1A < 0.48 V (VEMF) (119.4 dBm)
J3E < 0.91 V (VEMF) (113.8 dBm)
with preamplifier:
A1A < 0.68 V (VEMF) (116.4 dBm)J3E < 1.22 V (VEMF) (111.3 dBm)
Second order intercept point (IP2)
With or without preamplifier,
measurement level 2 +10 dBm,
interfering signals: 5 % and 10 %
offset from operating frequency
+80 dBm +100 dBm
Third order intercept point (IP3)
Without preamplifier, measurement
level 2 +10 dBm, interfering signals:
5 % and 10 % offset from operating
frequency
+50 dBm +50 dBm
With preamplifier, measurement level
2 +10 dBm, interfering signals:5 % and 10 % offset from operating
frequency
+32 dBm +45 dBm
Without preamplifier, measurement
level 2 5 dBm, interfering signals:
f 30 kHz
+27 dBm +27 dBm
Image rejection 130 dB 130 dB
IF rejection 110 dB 130 dB
Blocking
Without preamplifier,
useful signal level: 2 mV (VEMF),
interfering signal level: 10 V (VEMF),
f 5 % (f ref. to wanted signal)
3 dB reduction of audio level 3 dB reduction of audio level
Desensitization
Without preamplifier, useful signal
level 30 V (VEMF),
RX bandwidth: 2700 Hz,
interfering signal level: 315 mV or
1 V (VEMF),
f 5 % (f ref. to wanted signal)
(measurement without psophometric
weighting filter)
SINAD 20 dB
(interfering signal level: 315 mV)
SINAD 20 dB
(interfering signal level: 1 V)
Max. input level (operation) typ. 6.3 V (VEMF) typ. 6.3 V (VEMF)
-
8/10/2019 Series4100 Dat-sw En
8/20
Version 04.00, July 2011
8 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
R&S
VK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option)
f 29.999999 MHz, Ri= 0 VAnt100 V (VRMS)Input voltage protection (operation)
f > 29.999999 MHz, Ri= 0 VAnt10 V (VRMS)
without preamplifier, without digitally tuned RF selection
A1A < 110 dBm
J3E < 105 dBm
H3E < 96 dBm
A3E < 99 dBm
with preamplifier, without digitally tuned RF selectionA1A < 117 dBm
J3E < 113 dBm
H3E < 105 dBm
Sensitivity
100 kHz to 29.999999 MHz,
SINAD = 10 dB, psophometric
weighting filter (ITU-T)
A3E < 106 dBm
R&S
GS4114S LINK software (option for operation with tactical data links)
connection of DTS for LINK-11, LINK-Y, LINK-22
LINK-MULTI
LINK-SINGLE
J2D
LINK-Y MULTI
LINK-MULTI
LINK-SINGLE
Operating modes (D model only)
B7D
LINK-Y MULTI
in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHzTX modulation bandwidthpassband 300 Hz to 3050 Hz 2.75 kHz
in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHz
500 Hz to 3050 Hz < 3.5 ms
TX group delay
815 Hz to 3050 Hz 0.5 ms
in line with MIL-STD-188-203-1A
RX TX 7 ms
RX/TX switching time
TX RX 23 ms
AGC attack time 93 dBm to +7 dBm 13 ms
in line with MIL-STD-188-203-1A, frequency of audio tones within 450 Hz to 3050 Hz,
measurement level 2 53 dBm
IM3 40 dB
Inband intermodulation
IP3 33 dBm
frequency response J2D/B7D (in line with MIL-STD-188-203-1A)
450 Hz to 3050 Hz 1 dB
AF line input
300 Hz to 3050 Hz 1.5 dB
frequency response J2D/B7D (in line with MIL-STD-188-203-1A)
450 Hz to 3050 Hz 1 dB
AF line output
300 Hz to 3050 Hz 1.5 dB
R&S
GS4117S CE conformity mark (option)
CE conformity mark
R&SXK4115A/D basic transceiver
R&SGX4100A/D basic exciter
EN 300373-1 section 10.7 specifies
additional restrictions for the transmitters.
R&SVK4150 500 W power amplifier
R&SVK4190 1000 W power amplifier
R&SIN4150 500 W power supply
(model .02)
R&SIN4190 1000 W power supply
(model .02)
For operation in line with EN61000-3-2,
see operating modes described in the
operating manual.
R&SEK4100A/D basic receiver
R&SIN4000A 150 W power supply
R&SGB4000C remote control unit
These instruments already have the CE
conformity mark and therefore do not
require the R&SGS4117S option.
in line with EN 300373-1/-2/-3
with section 7.6 as restriction
limitation for CE operation:
power reduction to < 400 W for
f < 4 MHz
reduction of TX bandwidth
-
8/10/2019 Series4100 Dat-sw En
9/20
-
8/10/2019 Series4100 Dat-sw En
10/20
Version 04.00, July 2011
10 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
Audio and mechanical dataAudio data
AF microphone input (transceiver and exciter models only)
Level range unbalanced, 600 , for dyn. microphones 0.3 mV to 10 mV (VRMS)
Frequency response from line input to
antenna output
3.1 kHz bandwidth selected,
J3E modulation, 300 Hz to 3300 Hz
2.5 dB
1 kHz AF tone, F3E mode 5 % at 10 mV (VRMS)Harmonic distortion
1 kHz AF tone, J3E mode 1 % at 10 mV (VRMS)
AF line input (transceiver and exciter models only)Level range 2 line input, balanced, 600 adjustable from approx. 8 dBm to
+6 dBm, 0 dBm (nom.)
Frequency response from line input to
antenna output
3.1 kHz bandwidth selected,
J2D/J3E modulation, 300 Hz to 3300 Hz
1.5 dB
1 kHz AF tone, F3E mode 5 % at 0 dBmHarmonic distortion
1 kHz AF tone, J3E and J2D mode 1 % at 0 dBm
AF headset output
Output power into 300 load 4 V (VRMS)
Frequency response from antenna
input to headset output
3100 Hz bandwidth selected,
J3E modulation, 300 Hz to 3300 Hz
2.5 dB
Harmonic distortion 1 kHz AF tone into 300 load 5 % at 3 V (VRMS)
AF line output
Level range 2 line output, balanced, 600 settable within approx. 10 dBm to
+10 dBm in 0.1 dB steps, 0 dBm (nom.)
Frequency response from antenna
input to line output
3100 Hz bandwidth selected,
J2D/J3E modulation, 300 Hz to 3300 Hz
1.5 dB
1 kHz AF tone, F3E mode 5 % at 0 dBmHarmonic distortion
1 kHz AF tone, J3E and J2D mode 1 % at 0 dBm
nominal input power 1 WInternal loudspeaker
nominal input power (model .02 only) 0.3 W
output power into 4 > 1.5 WExternal loudspeaker output (rear panel)
harmonic distortion, 1 kHz AF tone 5 % at 1 W
Built-in interfaces
Front panel
Fill interface connector for R&SGP3000
fillgun proprietary
connector 1 NF-7Headset connector
connector 2 TRS 6.3 mm
Rear panel
External reference frequency BNC femaleRCB serial interface (optical) control of external system components SC system
Data interface RS-232-C, asynchronous,
synchronous operation prepared
15-pin female, D-Sub
RS-232-C 9-pin male, D-SubRemote control and software download
in line with IEEE 802.3 RJ-45 connector, 10BaseT
Audio/PTT 44-pin female, D-Sub
R&SXK4115A/D N femaleTX/RX (antenna)
R&SGX4100A/D BNC female
RX (antenna) BNC female
GPS (antenna) TNC female
Environmental data
Temperature ranges in line with MIL-STD-810F, method 501.4/502.4, EN 60068-2-1/2
Operating temperature range proc. II 20 C to +55 C
Storage temperature range proc. I 40 C to +70 C
Humidity in line with MIL-STD-810F, method 507.4 95 % relative humidity and variation of
temperature between +30 C to +55 C
Fungus in line with MIL-STD-810F, method 508.5 (in line with MIL-HDBK-454)
in line with MIL-STD-810F, method 500.4
proc. I, storage/air transport 10000 m above sea level
proc. II, operation
20 C to +55 C 1000 m above sea level
Permissible altitude
20 C to +35 C 3000 m above sea level
Vibration (sinusoidal) in line with MIL-STD-167-1, type 1 1.5 mm to 0.15 mm double amplitude and
4 Hz to 50 Hz, test period: 40 min/axis
Vibration (random) in line with MIL-STD-810F, method 514.5 shipboard random vibration exposure:
4 Hz to 100 Hz at 0.03 g/Hz, test period:
20 min/axis
-
8/10/2019 Series4100 Dat-sw En
11/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 11
Shock resistance in line with MIL-STD-810F, method 516.5,
proc. I, EN 60068-2-27
crossover frequency 45 Hz, 40 g, 15 ms to
23 ms, 3 shocks per main axis (pos./neg.)
EMI/EMC in line with MIL-STD-461E: CE102,
CS101, CS114, RE101, RE102, RS101,
RS103
Electrical power system requirements for R&SIN41x0 model .03 and
R&SBV4190 only
STANAG 1008, edition 8
MIL-STD-1399, section 300A
Electrical safety EN 60950-1, EN 60215-1
International protection code front panel/rest of device
R&SEK4100A/D basic receiver IP32/IP20 in line with IEC 60529R&S
XK4115A/D basic transceiver IP32/IP20 in line with IEC 60529
R&SGX4100A/D basic exciter IP32/IP20 in line with IEC 60529
R&SVK4150 500 W power amplifier IP20 in line with IEC 60529
R&SVK4190 1000 W power amplifier IP20 in line with IEC 60529
R&SIN4150 500 W power supply IP20 in line with IEC 60529
R&SIN4190 1000 W power supply IP20 in line with IEC 60529
R&SBV4190 transformer IP20 in line with IEC 60529
R&SIN4000A 150 W power supply IP32/IP20 in line with IEC 60529
Mechanical data
Dimensions W D H (Depth = distance between front panel and rear panel)
1 HU = 44 mm = 1.73 in
R&SEK4100A/D basic receiver 481 mm 481 mm 132 mm (3 HU),
19 in 19 in 5.19 in (3 HU)
R&S
XK4115A/D basic transceiver 481 mm 481 mm 132 mm (3 HU),19 in 19 in 5.19 in (3 HU)
R&SGX4100A/D basic exciter 481 mm 481 mm 132 mm (3 HU),
19 in 19 in 5.19 in (3 HU)
R&SVK4150 500 W power amplifier 481 mm 570 mm 264 mm (6 HU),
19 in 22.44 in 10.38 in (6 HU)
R&SVK4190 1000 W power amplifier 481 mm 570 mm 264 mm (6 HU),
19 in 22.44 in 10.38 in (6 HU)
Additional space (depth) for future power amplifier upgrade max. 200 mm (7.87 in)
R&SIN4150 500 W power supply 481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
R&SIN4190 1000 W power supply 481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
R&SBV4190 transformer 481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
R&S
IN4000A 150 W power supply 481 mm 420 mm 44 mm (1 HU),19 in 16.54 in 1.73 in (1 HU)
Additional space for rear cabling 200 mm (7.87 in) recommended
Weight
R&SEK4100A/D basic receiver without hardware options max. 14 kg (30.86 lb)
R&SXK4115A/D basic transceiver without hardware options max. 16.5 kg (36.38 lb)
R&SGX4100A/D basic exciter without hardware options max. 13 kg (28.65 lb)
R&SVK4150 500 W power amplifier without hardware options max. 30 kg (66.13 lb)
R&SVK4190 1000 W power amplifier without hardware options max. 38 kg (83.76 lb)
R&SIN4150 500 W power supply max. 24 kg (52.91 lb)
R&SIN4190 1000 W power supply max. 24 kg (52.91 lb)
R&SBV4190 transformer max. 53 kg (116.85 lb)
R&SIN4000A 150 W power supply max. 7.1 kg (15.65 lb)
Color of front panel RAL 7047
-
8/10/2019 Series4100 Dat-sw En
12/20
Version 04.00, July 2011
12 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
Power suppliesR&S
EK4100A/D receiver
specs complied with +28 V 1 VDC supply
permissible +19 V to +31 V
AC supply embedded 90 V to 264 V, 50/60 Hz
Input power consumption without options max. 80 VA
burst in line with EN 61000-4-4Power protection
surge in line with EN 61000-4-5
R&SXK4115A/D transceiverspecs complied with +28 V 1 VDC supply
permissible +19 V to +31 V
AC supply with R&SIN4000A 90 V to 264 V, 47 to 63 Hz
3
Input power consumption without options, for operation with
R&SIN4000A
max. 580 W, max. 675 VA
500 W transceiver system
AC supply 230 V (1 phase + N)
208 V (, 3 phases) line-to-line
230 V (Y, 3 phases + N)
input voltage tolerance +10 %, 15 %, 47 Hz to 63 Hz
input power consumption
1 phase max. 2.5 kVA
3 phases (Y) max. 3.6 kVA
3 phases () max. 3.0 kVA
power factor correction (PFC)
1 phase > 0.99
3 phases (Y) > 0.65
R&SIN4150 power supply (model .02)
3 phases () > 0.90
AC supply, galvanically isolated phases 3 225 V from R&SBV4190
input voltage tolerance 20 %, 47 Hz to 63 Hz
input power consumption max. 2.5 kVA
R&SIN4150 power supply (model .03)
to be used only in combination with an
R&SBV4190 transformer
power factor correction (PFC) 0.99
DC supply 220 V
input voltage tolerance 10 %
R&SIN4150 power supply (model .12)
input power consumption max. 2.5 kVA
AC supply 115 V (1 phase + N)
input voltage tolerance +10 %, 15 %, 47 Hz to 63 Hz
input power consumption max. 2.5 kVA
R&SIN4190 power supply (model .02)
power factor correction (PFC) 0.99Emergency operation of all power supply
models
DC supply for battery operation 24 V to 27.6 V
AC supply, , 3 phases 440 V
input voltage tolerance 20 %, 47 Hz to 63 Hz
R&SBV4190 transformer
input power consumption max. 4.5 kVA
3 For reduced voltage (< 100 V), ambient temperature may not exceed +50 C and output power may not exceed 700 W.
-
8/10/2019 Series4100 Dat-sw En
13/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 13
1000 W transceiver system
AC supply 230 V (1 phase + N)
208 V (, 3 phases) line-to-line
230 V (Y, 3 phases + N)
input voltage tolerance +10 %, 15 %, 47 Hz to 63 Hz
input power consumption
1 phase max. 4.5 kVA
3 phases (Y) max. 6.5 kVA3 phases () max. 5.0 kVApower factor correction (PFC)
1 phase > 0.99
3 phases (Y) > 0.65
R&SIN4190 power supply (model .02)
3 phases () > 0.90
AC supply, galvanically isolated phases 3 225 V from R&SBV4190
input voltage tolerance 20 %, 47 Hz to 63 Hz
input power consumption max. 4.5 kVA
R&SIN4190 power supply (model .03)
to be used only in combination with an
R&SBV4190 transformer
power factor correction (PFC) 0.99
Emergency operation of all power supply
models
DC supply for battery operation 24 V to 27.6 V
AC supply, , 3 phases 440 V line-to-line
input voltage tolerance 20 %, 47 Hz to 63 Hz
R&SBV4190 transformer
input power consumption max. 4.5 kVA
-
8/10/2019 Series4100 Dat-sw En
14/20
Version 04.00, July 2011
14 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
Ordering information
R&SEK4100A/D receiverDesignation Type Order No.
Base units
VLF-HF Receiver, AC/DC, without local control panel and radio software, ruggedized model R&SMR4100E 6118.9609.22
Radio software
Software CD without export restriction R&S
DS4100A 6119.7800.xxSoftware CD with export restriction R&S
DS4100D 6119.7900.xx
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35
Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&SFK4120 6119.5007.02
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section R&SFK4140 6119.6003.02
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS) R&SGS4102 6119.3504.02
Software options (option keys)
ALE-2G (FED-STD-1045/1046/1049) R&SGS4101S 6120.6003.02
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM) R&SGS4155S 6142.7560.02
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
R&SGS4114S 6142.7619.02
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
R&SGM4120S 6142.7519.02
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
R&SGM4121S 6142.7719.02
Split Site R&SGS4156S 6142.7760.02
Mating connector set
Mating Connector Set for R&SMR4100E R&S
ZF4101 6120.5007.05
-
8/10/2019 Series4100 Dat-sw En
15/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 15
R&SXK4115A/D transceiverDesignation Type Order No.
Base units
HF Transceiver, 150 W, DC, without local control panel and radio software, ruggedized model R&SMR4100X 6119.7251.22
Radio software
Software CD without export restriction R&SDS4100A 6119.7800.xx
Software CD with export restriction R&SDS4100D 6119.7900.xx
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&S
FK4120 6119.5007.02
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section R&SFK4140 6119.6003.02
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS) R&SGS4102 6119.3504.02
Software options (option keys)
EPM (ECCM) Software: R&SSECOM-H R&S
GS3001S 6095.4859.02
ALE-2G (FED-STD-1045/1046/1049) R&SGS4101S 6120.6003.02
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM) R&SGS4155S 6142.7560.02
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
R&SGS4114S 6142.7619.02
CE Conformity Mark R&SGS4117S 6120.3140.02
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
R&SGM4120S 6142.7519.02
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
R&SGM4121S 6142.7719.02
Split Site R&SGS4156S 6142.7760.02
Power supply units
External Power Supply, AC/DC, ruggedized model R&SIN4000A 6105.5800.02
Mating connector sets
Mating Connector Set for R&SIN4000A R&S
ZF4001 6105.7002.02
Mating Connector Set for R&SMR4100X R&S
ZF4101 6120.5007.02
Power supply cables
Power Supply Cable, R&SXK4115 R&S
IN4000A, 0.5 m length R&S
GK4103 6120.5807.05
Power Supply Cable, R&SXK4115 R&S
IN4000A, 1 m length R&S
GK4103 6120.5807.10
Power Supply Cable, R&SXK4115 R&S
IN4000A, 2.5 m length R&S
GK4103 6120.5807.25
-
8/10/2019 Series4100 Dat-sw En
16/20
Version 04.00, July 2011
16 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
500 W and 1000 W transceiver systemsDesignation Type Order No.
Base units
HF Receiver/Exciter, DC, without local control panel and radio software, ruggedized model R&SMR4100G 6118.9750.22
Radio software
Software CD without export restriction R&SDS4100A 6119.7800.xx
Software CD with export restriction R&SDS4100D 6119.7900.xx
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model R&SGB4000C 6105.6006.35Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section R&S
FK4120 6119.5007.02
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section R&SFK4140 6119.6003.02
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS) R&SGS4102 6119.3504.02
Software options (option keys)
EPM (ECCM) Software: R&SSECOM-H R&S
GS3001S 6095.4859.02
ALE-2G (FED-STD-1045/1046/1049) R&SGS4101S 6120.6003.02
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM) R&SGS4155S 6142.7560.02
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
R&SGS4114S 6142.7619.02
Selective Level Control (PA) R&SGS4115S 6120.6703.02
CE Conformity Mark R&SGS4117S 6120.3140.02
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
R&SGM4120S 6142.7519.02
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
R&SGM4121S 6142.7719.02
Split Site R&SGS4156S 6142.7760.02
Power amplifiers
500 W HF Power Amplifier R&SVK4150 6119.9002.03
500 W HF Power Amplifier, with receiver input protection R&SVK4150 6119.9002.13
1000 W HF Power Amplifier R&SVK4190 6120.1501.03
1000 W HF Power Amplifier, with receiver input protection R&SVK4190 6120.1501.13
Power supply units for 500 W transceiver system
Power Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase R&SIN4150 6120.0705.02
Power Supply 440 V AC, 3 phases (used together with an R&SBV4190 transformer) R&S
IN4150 6120.0705.03
Power Supply 220 V DC R&SIN4150 6120.0705.12
Transformer 440 V AC, 3-phase R&SBV4190 6120.2908.02
Power Supply 115 V AC, 1 phase + N R&SIN4190 6120.2708.02
Power supply units for 1000 W transceiver systemPower Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase R&S
IN4190 6120.2708.02
Power Supply 440 V AC, 3 phases (used together with an R&SBV4190 transformer) R&S
IN4190 6120.2708.03
Transformer 440 V AC, 3-phase R&SBV4190 6120.2908.02
Mating connector sets
Mating Connector Set for R&SMR4100G R&S
ZF4101 6120.5007.04
Mating Connector Set for R&SVK4150/VK4190 R&S
ZF4103 6120.5207.02
Mating Connector Set for R&SIN4150/IN4190 R&S
ZF4107 6120.2808.02
Mating Connector Set for R&SBV4190 R&S
ZF4108 6120.7700.02
Connecting cables
Fiber-Optic Connecting Cable, R&SVKx R&S
GXx, 1 m length R&S
GK4101 6120.5620.10
Fiber-Optic Connecting Cable, R&SVKx R&S
GXx, 3.5 m length R&S
GK4101 6120.5620.35
Fiber-Optic Connecting Cable, R&SVKx R&S
GXx, 50 m length R&S
GK4101 6120.5620.50
DC Cable, R&SGXx R&S
VKx, 2.5 m length R&S
GK4104 6120.5907.25
RF Cable, R&SGXx R&S
VKx, 3 m length R&S
GK4105 6120.3604.03
Control Cable, R&SVKx R&SINx, 3 m length R&SGK4106 6120.3656.03
DC Cable, R&SVKx R&S
INx, 3 m length R&S
GK4107 6120.3704.03
Power Cable, R&SBVx R&S
INx, 3 m length R&S
GK4108 6120.3756.03
-
8/10/2019 Series4100 Dat-sw En
17/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 17
Auxiliary equipmentDesignation Type Order No.
Remote control units
Remote Control Unit, ruggedized model R&SGB4000C 6105.6006.36
Mating Connector Set for R&SGB4000C R&S
ZF4410 6105.9011.04
Audio units
Headset incl. microphone (ruggedized version) with cable and NF-7 connector R&SGA012 0693.7664.02
Handset incl. microphone (ruggedized version) with cable and NF-7 connector R&SGA013 0693.7712.02
Headset, dynamic with cable and NF-7 connector R&SGA015 0583.6012.02Microphone with PTT, handheld R&S
GA2100 6064.5001.02
Handset with PTT, standard R&SGA2120 6064.6008.03
Other equipment
Morse Key with cable and connector R&SGA2180 6075.3763.02
Fillgun R&SGP3000 6099.3805.02
USB Cable, fillgun PC R&SGK3021 6118.1750.02
-
8/10/2019 Series4100 Dat-sw En
18/20
Version 04.00, July 2011
18 Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios
-
8/10/2019 Series4100 Dat-sw En
19/20
Version 04.00, July 2011
Rohde & SchwarzR&SM3SR Series4100 Software Defined Radios 19
-
8/10/2019 Series4100 Dat-sw En
20/20
R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners | Printed in Germany (ch)
PD 5213.9557.22 | Version 04.00 | July 2011 | R&SM3SR Series4100
Subject to change
2008 - 2011 Rohde & Schwarz GmbH & Co. KG | 81671 Mnchen, Germany
About Rohde & Schwarz
Rohde & Schwarz is an independent group of companies
specializing in electronics. It is a leading supplier of solu-
tions in the fields of test and measurement, broadcasting,
radiomonitoring and radiolocation, as well as secure
communications. Established more than 75 years ago,
Rohde & Schwarz has a global presence and a dedicated
service network in over 70 countries. Company headquar-
ters are in Munich, Germany.
Environmental commitment
Energy-efcient products
Continuous improvement in environmental sustainability
ISO 14001-certied environmental management system
Rohde & Schwarz GmbH & Co. KG
www.rohde-schwarz.com
Regional contact
Europe, Africa, Middle East
+49 89 4129 123 45
North America
1 888 TEST RSA (1 888 837 87 72)
Latin America
+1 410 910 79 88
Asia/Pacic
+65 65 13 04 88
Certifed Quality System
ISO 9001
Service you can rely on
Worldwide
Local and personalized
Customized and flexible
Uncompromising quality
Long-term dependability
Certifed Quality System
AQAP-2110
Certifed Quality System
EN 9100
Certifed Quality System
EN 9110