Nightstar LED

-SERIES1

-SERIES1

Nightstar Series 1

Nightstar Series 2

optics / light source

> 30, 60, 80 & 100 LED options available.

> Fully soak tested light engines ensuringLED reliability and eliminating earlyfailures.

> 4000°K colour temperature.

> Eight lumen packages available(5,000, 6,000, 8,000 11,000, 16,000,22,000, 30,000 & 36,000).

approvals

Complies with AS/NZS 60598.1; AS/NZS 1158.6

IP IP65 luminaire* and LED optic

Ta 40oC* .TLS option is IP43 rated with IP65 LED optics

Configuration Delivered Lumens Power Consumption Drive Current Rated Life of LED Module (L70B50 @Tq 20˚C)*

DS1064F7L068 6653 51W 525mA 100,000+ hrs

DS1164F7L137 16437 137W 700mA 100,000+ hrs

DS2304F7L260 30188 260W 1050mA 100,000+ hrs

Note: Data is correct at time of print.

* For other life metric data in line with IEC PAS62722-2-1 and 62717 contact your Gerard Lighting Representative for details.

The modern styling of the the Nightstar LED is striking yet unobtrusive - making a bold, progressive statement as it blends seamlessly with its environment.

The Nightstar LED Series takes all the benefits of LED technology and moulds it into a high performance, high efficacy and long life area lighting luminaire.

With its exceptional ‘finned’ thermal management system, the Nightstar LED Series is capable of delivering over 100,000 hours LED module life.*

Offering a wide range of lumen packages and optical distributions, the Nightstar LED Series delivers optimised lighting application designs.

With the integrated DALI option, the Nightstar LED Series delivers a controllable luminaire that helps you realise energy consumption goals and demonstrate environmental responsibility.

With its unique optics placed below each LED, light is delivered where it needs to be, providing a uniform Nightime Friendly environment with minimal light pollution.

Indicative Performance | Selected Wattages

150mm

150mm

dimensions in mm

features and benefits

System Longevity

> The Nightstar LED Series’ diecastaluminium housing acts as itsprimary heat sink. Its longitudinalfins employ conductive coolingtechniques to dissipate heat awayfrom the key LED components anddriver that extends the life of theluminaire.

> Light engine(s) consist of either 20or 30 high efficacy LEDs (subjectto chosen configuration) mountedto a metal-core circuit board tomaximize heat dissipation andpromote long life.

exceptional performance

> Offering eight lumen packagesranging from 5000 lm to 36,000lm with efficiencies of up to 130lpw (Lumens Per Watts).

> Three optimised distributions(asymmetric, symmetric andforward throw) delivered byquality LEDs and bespoke UVstabilised optics.

> LED light engines with 0% ULORensuring night time friendly.

complete light package

Available with DALI compatible driver and photocell options enabling control compatability.

Nightstar Series 1

Nightstar Series 2

weight (with control gear)

Series 1 12.2kg

Series 2 15.0kg

windage (effective projected area)

Series 1 0.07m2

0.10m2

TA

40oC

838

331

188

1018

380

191

specification

Single-piece die-cast aluminium housing, that conforms to EN1706 AC-46500, with integral heat sink fins to optimise thermal management through conductive cooling.

LED modules are IP65 with individual lenses, and high grade aluminium housing to transfer heat away from the LEDs and dissipate through the finned housing for cooling.

The LED driver is mounted in direct contact with the finned housing for cooling to promote low operating temperature and long system life. Housing is completely sealed against moisture and environmental contaminants (IP65).

Installation is via the integrated mounting block and integral arm that facilitate a quick and easy installation.

light distribution

Symmetric - Type 5 Asymmetric - Type 3

Forward Throw - Type 4

forward throw symmetric asymmetric

forward throw symmetric asymmetric

forward throw symmetric asymmetric

applications

Landscaped areas

Car parks

Amenity areas

Town squares

Retail parks

Entrance roads

Parks

Series 2

ordering details - luminaire

For more information, contact your Gerard Lighting representative or visit: www.gerardlighting.com.au

Issue

d 20

1201

6

N.B. Mounting blocks are required for all luminaires listed above - both Series 1 & 2